arch/arm/boot/dts/integratorcp.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree for the ARM Integrator/CP platform
   4  */
   5
   6 /dts-v1/;
   7 /include/ "integrator.dtsi"
   8
   9 / {
  10         model = "ARM Integrator/CP";
  11         compatible = "arm,integrator-cp";
  12
  13         chosen {
  14                 bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
  15         };
  16
  17         cpus {
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20
  21                 cpu@0 {
  22                         device_type = "cpu";
  23                         /*
  24                          * Since the board has pluggable CPU modules, we
  25                          * cannot define a proper compatible here. Let the
  26                          * boot loader fill in the apropriate compatible
  27                          * string if necessary.
  28                          */
  29                         /* compatible = "arm,arm920t"; */
  30                         reg = <0>;
  31                         /*
  32                          * TBD comment.
  33                          */
  34                                          /* kHz     uV   */
  35                         operating-points = <50000  0
  36                                             48000  0>;
  37                         clocks = <&cmcore>;
  38                         clock-names = "cpu";
  39                         clock-latency = <1000000>; /* 1 ms */
  40                 };
  41         };
  42
  43         /*
  44          * The Integrator/CP overall clocking architecture can be found in
  45          * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
  46          * appear to illustrate the layout used in most configurations.
  47          */
  48
  49         /* The codec chrystal operates at 24.576 MHz */
  50         xtal_codec: xtal24.576@24.576M {
  51                 #clock-cells = <0>;
  52                 compatible = "fixed-clock";
  53                 clock-frequency = <24576000>;
  54         };
  55
  56         /* The chrystal is divided by 2 by the codec for the AACI bit clock */
  57         aaci_bitclk: aaci_bitclk@12.288M {
  58                 #clock-cells = <0>;
  59                 compatible = "fixed-factor-clock";
  60                 clock-div = <2>;
  61                 clock-mult = <1>;
  62                 clocks = <&xtal_codec>;
  63         };
  64
  65         /* This is a 25MHz chrystal on the base board */
  66         xtal25mhz: xtal25mhz@25M {
  67                 #clock-cells = <0>;
  68                 compatible = "fixed-clock";
  69                 clock-frequency = <25000000>;
  70         };
  71
  72         /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
  73         uartclk: uartclk@14.74M {
  74                 #clock-cells = <0>;
  75                 compatible = "fixed-clock";
  76                 clock-frequency = <14745600>;
  77         };
  78
  79         /* Actually sysclk I think */
  80         pclk: pclk@0 {
  81                 #clock-cells = <0>;
  82                 compatible = "fixed-clock";
  83                 clock-frequency = <0>;
  84         };
  85
  86         core-module@10000000 {
  87                 /* 24 MHz chrystal on the core module */
  88                 cm24mhz: cm24mhz@24M {
  89                         #clock-cells = <0>;
  90                         compatible = "fixed-clock";
  91                         clock-frequency = <24000000>;
  92                 };
  93
  94                 /* Oscillator on the core module, clocks the CPU core */
  95                 cmcore: cmosc@24M {
  96                         compatible = "arm,syscon-icst525-integratorcp-cm-core";
  97                         #clock-cells = <0>;
  98                         lock-offset = <0x14>;
  99                         vco-offset = <0x08>;
 100                         clocks = <&cm24mhz>;
 101                 };
 102
 103                 /* Oscillator on the core module, clocks the memory bus */
 104                 cmmem: cmosc@24M {
 105                         compatible = "arm,syscon-icst525-integratorcp-cm-mem";
 106                         #clock-cells = <0>;
 107                         lock-offset = <0x14>;
 108                         vco-offset = <0x08>;
 109                         clocks = <&cm24mhz>;
 110                 };
 111
 112                 /* Auxilary oscillator on the core module, clocks the CLCD */
 113                 auxosc: auxosc@24M {
 114                         compatible = "arm,syscon-icst525";
 115                         #clock-cells = <0>;
 116                         lock-offset = <0x14>;
 117                         vco-offset = <0x1c>;
 118                         clocks = <&cm24mhz>;
 119                 };
 120
 121                 /* The KMI clock is the 24 MHz oscillator divided to 8MHz */
 122                 kmiclk: kmiclk@1M {
 123                         #clock-cells = <0>;
 124                         compatible = "fixed-factor-clock";
 125                         clock-div = <3>;
 126                         clock-mult = <1>;
 127                         clocks = <&cm24mhz>;
 128                 };
 129
 130                 /* The timer clock is the 24 MHz oscillator divided to 1MHz */
 131                 timclk: timclk@1M {
 132                         #clock-cells = <0>;
 133                         compatible = "fixed-factor-clock";
 134                         clock-div = <24>;
 135                         clock-mult = <1>;
 136                         clocks = <&cm24mhz>;
 137                 };
 138         };
 139
 140         syscon {
 141                 compatible = "arm,integrator-cp-syscon", "syscon";
 142                 reg = <0xcb000000 0x100>;
 143         };
 144
 145         timer0: timer@13000000 {
 146                 /* TIMER0 runs directly on the 25MHz chrystal */
 147                 compatible = "arm,integrator-cp-timer";
 148                 clocks = <&xtal25mhz>;
 149         };
 150
 151         timer1: timer@13000100 {
 152                 /* TIMER1 runs @ 1MHz */
 153                 compatible = "arm,integrator-cp-timer";
 154                 clocks = <&timclk>;
 155         };
 156
 157         timer2: timer@13000200 {
 158                 /* TIMER2 runs @ 1MHz */
 159                 compatible = "arm,integrator-cp-timer";
 160                 clocks = <&timclk>;
 161         };
 162
 163         pic: pic@14000000 {
 164                 valid-mask = <0x1fc003ff>;
 165         };
 166
 167         cic: cic@10000040 {
 168                 compatible = "arm,versatile-fpga-irq";
 169                 #interrupt-cells = <1>;
 170                 interrupt-controller;
 171                 reg = <0x10000040 0x100>;
 172                 clear-mask = <0xffffffff>;
 173                 valid-mask = <0x00000007>;
 174         };
 175
 176         /* The SIC is cascaded off IRQ 26 on the PIC */
 177         sic: sic@ca000000 {
 178                 compatible = "arm,versatile-fpga-irq";
 179                 interrupt-parent = <&pic>;
 180                 interrupts = <26>;
 181                 #interrupt-cells = <1>;
 182                 interrupt-controller;
 183                 reg = <0xca000000 0x100>;
 184                 clear-mask = <0x00000fff>;
 185                 valid-mask = <0x00000fff>;
 186         };
 187
 188         ethernet@c8000000 {
 189                 compatible = "smsc,lan91c111";
 190                 reg = <0xc8000000 0x10>;
 191                 interrupt-parent = <&pic>;
 192                 interrupts = <27>;
 193         };
 194
 195         fpga {
 196                 /*
 197                  * These PrimeCells are at the same location and using
 198                  * the same interrupts in all Integrators, but in the CP
 199                  * slightly newer versions are deployed.
 200                  */
 201                 rtc@15000000 {
 202                         compatible = "arm,pl031", "arm,primecell";
 203                         clocks = <&pclk>;
 204                         clock-names = "apb_pclk";
 205                 };
 206
 207                 uart@16000000 {
 208                         compatible = "arm,pl011", "arm,primecell";
 209                         clocks = <&uartclk>, <&pclk>;
 210                         clock-names = "uartclk", "apb_pclk";
 211                 };
 212
 213                 uart@17000000 {
 214                         compatible = "arm,pl011", "arm,primecell";
 215                         clocks = <&uartclk>, <&pclk>;
 216                         clock-names = "uartclk", "apb_pclk";
 217                 };
 218
 219                 kmi@18000000 {
 220                         compatible = "arm,pl050", "arm,primecell";
 221                         clocks = <&kmiclk>, <&pclk>;
 222                         clock-names = "KMIREFCLK", "apb_pclk";
 223                 };
 224
 225                 kmi@19000000 {
 226                         compatible = "arm,pl050", "arm,primecell";
 227                         clocks = <&kmiclk>, <&pclk>;
 228                         clock-names = "KMIREFCLK", "apb_pclk";
 229                 };
 230
 231                 /*
 232                  * These PrimeCells are only available on the Integrator/CP
 233                  */
 234                 mmc@1c000000 {
 235                         compatible = "arm,pl180", "arm,primecell";
 236                         reg = <0x1c000000 0x1000>;
 237                         interrupts = <23 24>;
 238                         max-frequency = <515633>;
 239                         clocks = <&uartclk>, <&pclk>;
 240                         clock-names = "mclk", "apb_pclk";
 241                 };
 242
 243                 aaci@1d000000 {
 244                         compatible = "arm,pl041", "arm,primecell";
 245                         reg = <0x1d000000 0x1000>;
 246                         interrupts = <25>;
 247                         clocks = <&pclk>;
 248                         clock-names = "apb_pclk";
 249                 };
 250
 251                 clcd@c0000000 {
 252                         compatible = "arm,pl110", "arm,primecell";
 253                         reg = <0xC0000000 0x1000>;
 254                         interrupts = <22>;
 255                         clocks = <&auxosc>, <&pclk>;
 256                         clock-names = "clcdclk", "apb_pclk";
 257
 258                         port {
 259                                 /*
 260                                  * The VGA connected is implemented with a
 261                                  * THS8134A triple DAC that can be run in 24bit
 262                                  * or 16bit RGB mode.
 263                                  */
 264                                 clcd_pads: endpoint {
 265                                         remote-endpoint = <&clcd_panel>;
 266                                         arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
 267                                 };
 268                         };
 269
 270                         panel {
 271                                 compatible = "panel-dpi";
 272
 273                                 port {
 274                                         clcd_panel: endpoint {
 275                                                 remote-endpoint = <&clcd_pads>;
 276                                         };
 277                                 };
 278
 279                                 /* Standard 640x480 VGA timings */
 280                                 panel-timing {
 281                                         clock-frequency = <25175000>;
 282                                         hactive = <640>;
 283                                         hback-porch = <48>;
 284                                         hfront-porch = <16>;
 285                                         hsync-len = <96>;
 286                                         vactive = <480>;
 287                                         vback-porch = <33>;
 288                                         vfront-porch = <10>;
 289                                         vsync-len = <2>;
 290                                 };
 291                         };
 292                 };
 293         };
 294 };