arch/arm/boot/dts/imx6ul-phytec-segin.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2016 PHYTEC Messtechnik GmbH
   4  * Author: Christian Hemp <c.hemp@phytec.de>
   5  */
   6
   7 / {
   8         model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
   9         compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
  10
  11         aliases {
  12                 rtc0 = &i2c_rtc;
  13                 rtc1 = &snvs_rtc;
  14         };
  15
  16         reg_sound_1v8: regulator-1v8 {
  17                 compatible = "regulator-fixed";
  18                 regulator-name = "i2s-audio-1v8";
  19                 regulator-min-microvolt = <1800000>;
  20                 regulator-max-microvolt = <1800000>;
  21                 status = "disabled";
  22         };
  23
  24         reg_sound_3v3: regulator-3v3 {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "i2s-audio-3v3";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 status = "disabled";
  30         };
  31
  32         reg_can1_en: regulator-can1 {
  33                 compatible = "regulator-fixed";
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&princtrl_flexcan1_en>;
  36                 regulator-name = "Can";
  37                 regulator-min-microvolt = <3300000>;
  38                 regulator-max-microvolt = <3300000>;
  39                 gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
  40                 enable-active-high;
  41                 status = "disabled";
  42         };
  43
  44         reg_adc1_vref_3v3: regulator-vref-3v3 {
  45                 compatible = "regulator-fixed";
  46                 regulator-name = "vref-3v3";
  47                 regulator-min-microvolt = <3300000>;
  48                 regulator-max-microvolt = <3300000>;
  49         };
  50
  51         sound: sound {
  52                 compatible = "simple-audio-card";
  53                 simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
  54                 simple-audio-card,format = "i2s";
  55                 simple-audio-card,bitclock-master = <&dailink_master>;
  56                 simple-audio-card,frame-master = <&dailink_master>;
  57                 simple-audio-card,widgets =
  58                         "Line", "Line In",
  59                         "Line", "Line Out",
  60                         "Speaker", "Speaker";
  61                 simple-audio-card,routing =
  62                         "Line Out", "LLOUT",
  63                         "Line Out", "RLOUT",
  64                         "Speaker", "SPOP",
  65                         "Speaker", "SPOM",
  66                         "LINE1L", "Line In",
  67                         "LINE1R", "Line In";
  68                 status = "disabled";
  69
  70                 simple-audio-card,cpu {
  71                         sound-dai = <&sai2>;
  72                 };
  73
  74                 dailink_master: simple-audio-card,codec {
  75                         sound-dai = <&tlv320>;
  76                         clocks = <&clks IMX6UL_CLK_SAI2>;
  77                 };
  78         };
  79
  80 };
  81
  82 &adc1 {
  83         pinctrl-names = "default";
  84         pinctrl-0 = <&pinctrl_adc1>;
  85         vref-supply = <&reg_adc1_vref_3v3>;
  86         /*
  87          * driver can not separate a specific channel so we request 4 channels
  88          * here - we need only the fourth channel
  89          */
  90         num-channels = <4>;
  91         status = "disabled";
  92 };
  93
  94 &can1 {
  95         pinctrl-names = "default";
  96         pinctrl-0 = <&pinctrl_flexcan1>;
  97         xceiver-supply = <&reg_can1_en>;
  98         status = "disabled";
  99 };
 100
 101 &clks {
 102         assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
 103         assigned-clock-rates = <786432000>;
 104 };
 105
 106 &ecspi3 {
 107         pinctrl-names = "default";
 108         pinctrl-0 = <&pinctrl_ecspi3>;
 109         cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 110         status = "disabled";
 111 };
 112
 113 &fec2 {
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&pinctrl_enet2>;
 116         phy-mode = "rmii";
 117         phy-handle = <&ethphy2>;
 118         status = "disabled";
 119 };
 120
 121 &i2c1 {
 122         tlv320: codec@18 {
 123                 compatible = "ti,tlv320aic3007";
 124                 #sound-dai-cells = <0>;
 125                 reg = <0x18>;
 126                 AVDD-supply = <&reg_sound_3v3>;
 127                 IOVDD-supply = <&reg_sound_3v3>;
 128                 DRVDD-supply = <&reg_sound_3v3>;
 129                 DVDD-supply = <&reg_sound_1v8>;
 130                 status = "disabled";
 131         };
 132
 133         stmpe: touchscreen@44 {
 134                 compatible = "st,stmpe811";
 135                 reg = <0x44>;
 136                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 137                 interrupt-parent = <&gpio5>;
 138                 pinctrl-names = "default";
 139                 pinctrl-0 = <&pinctrl_stmpe>;
 140                 status = "disabled";
 141
 142                 touchscreen {
 143                         compatible = "st,stmpe-ts";
 144                         st,sample-time = <4>;
 145                         st,mod-12b = <1>;
 146                         st,ref-sel = <0>;
 147                         st,adc-freq = <1>;
 148                         st,ave-ctrl = <1>;
 149                         st,touch-det-delay = <2>;
 150                         st,settling = <2>;
 151                         st,fraction-z = <7>;
 152                         st,i-drive = <1>;
 153                         touchscreen-inverted-x = <1>;
 154                         touchscreen-inverted-y = <1>;
 155                 };
 156         };
 157
 158         i2c_rtc: rtc@68 {
 159                 pinctrl-names = "default";
 160                 pinctrl-0 = <&pinctrl_rtc_int>;
 161                 compatible = "microcrystal,rv4162";
 162                 reg = <0x68>;
 163                 interrupt-parent = <&gpio5>;
 164                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 165                 status = "disabled";
 166         };
 167 };
 168
 169 &mdio {
 170         ethphy2: ethernet-phy@2 {
 171                 reg = <2>;
 172                 micrel,led-mode = <1>;
 173                 clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 174                 clock-names = "rmii-ref";
 175                 status = "disabled";
 176         };
 177 };
 178
 179 &pwm3 {
 180         pinctrl-names = "default";
 181         pinctrl-0 = <&pinctrl_pwm3>;
 182         status = "disabled";
 183 };
 184
 185 &sai2 {
 186         pinctrl-names = "default";
 187         pinctrl-0 = <&pinctrl_sai2>;
 188         assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
 189                         <&clks IMX6UL_CLK_SAI2>;
 190         assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
 191         assigned-clock-rates = <0>, <19200000>;
 192         fsl,sai-mclk-direction-output;
 193         status = "disabled";
 194 };
 195
 196 &uart5 {
 197         pinctrl-names = "default";
 198         pinctrl-0 = <&pinctrl_uart5>;
 199         uart-has-rtscts;
 200         status = "disabled";
 201 };
 202
 203 &usbotg1 {
 204         pinctrl-names = "default";
 205         pinctrl-0 = <&pinctrl_usb_otg1_id>;
 206         dr_mode = "otg";
 207         status = "disabled";
 208 };
 209
 210 &usbotg2 {
 211         dr_mode = "host";
 212         disable-over-current;
 213         status = "disabled";
 214 };
 215
 216 &usdhc1 {
 217         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 218         pinctrl-0 = <&pinctrl_usdhc1>;
 219         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 220         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 221         cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 222         no-1-8-v;
 223         keep-power-in-suspend;
 224         wakeup-source;
 225         status = "disabled";
 226 };
 227
 228 &iomuxc {
 229         pinctrl_adc1: adc1grp {
 230                 fsl,pins = <
 231                         MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
 232                 >;
 233         };
 234
 235         pinctrl_ecspi3: ecspi3grp {
 236                 fsl,pins = <
 237                         MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO      0x10b0
 238                         MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI      0x10b0
 239                         MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK    0x10b0
 240                         MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20     0x10b0
 241                 >;
 242         };
 243
 244         pinctrl_enet2: enet2grp {
 245                 fsl,pins = <
 246                         MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
 247                         MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
 248                         MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
 249                         MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
 250                         MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b010
 251                         MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010
 252                         MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010
 253                         MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b010
 254                 >;
 255         };
 256
 257         pinctrl_flexcan1: flexcan1 {
 258                 fsl,pins = <
 259                         MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX      0x0b0b0
 260                         MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX      0x0b0b0
 261                 >;
 262         };
 263
 264         princtrl_flexcan1_en: flexcan1engrp {
 265                 fsl,pins = <
 266                         MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02      0x17059
 267                 >;
 268         };
 269
 270         pinctrl_pwm3: pwm3grp {
 271                 fsl,pins = <
 272                         MX6UL_PAD_GPIO1_IO04__PWM3_OUT  0x0b0b0
 273                 >;
 274         };
 275
 276         pinctrl_rtc_int: rtcintgrp {
 277                 fsl,pins = <
 278                         MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01      0x17059
 279                 >;
 280         };
 281
 282         pinctrl_sai2: sai2grp {
 283                 fsl,pins = <
 284                         MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK        0x17088
 285                         MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC        0x17088
 286                         MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA     0x11088
 287                         MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA        0x11088
 288                         MX6UL_PAD_JTAG_TMS__SAI2_MCLK           0x17088
 289                 >;
 290         };
 291
 292         pinctrl_stmpe: stmpegrp {
 293                 fsl,pins = <
 294                         MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03      0x17059
 295                 >;
 296         };
 297
 298         pinctrl_uart5: uart5grp {
 299                 fsl,pins = <
 300                         MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX   0x1b0b1
 301                         MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX   0x1b0b1
 302                         MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS     0x1b0b1
 303                         MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS     0x1b0b1
 304                 >;
 305         };
 306
 307         pinctrl_usb_otg1_id: usbotg1idgrp {
 308                 fsl,pins = <
 309                         MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
 310                 >;
 311         };
 312
 313         pinctrl_usdhc1: usdhc1grp {
 314                 fsl,pins = <
 315                         MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
 316                         MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x10059
 317                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
 318                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
 319                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
 320                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
 321                         MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059
 322                 >;
 323         };
 324
 325         pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
 326                 fsl,pins = <
 327                         MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x170b9
 328                         MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x100b9
 329                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x170b9
 330                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x170b9
 331                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x170b9
 332                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x170b9
 333                 >;
 334         };
 335
 336         pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
 337                 fsl,pins = <
 338                         MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x170f9
 339                         MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x100f9
 340                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x170f9
 341                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x170f9
 342                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x170f9
 343                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x170f9
 344                 >;
 345         };
 346 };