arch/arm/boot/dts/imx6sx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright 2014 Freescale Semiconductor, Inc.
   4
   5 #include <dt-bindings/clock/imx6sx-clock.h>
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/arm-gic.h>
   9 #include "imx6sx-pinfunc.h"
  10
  11 / {
  12         #address-cells = <1>;
  13         #size-cells = <1>;
  14         /*
  15          * The decompressor and also some bootloaders rely on a
  16          * pre-existing /chosen node to be available to insert the
  17          * command line and merge other ATAGS info.
  18          */
  19         chosen {};
  20
  21         aliases {
  22                 can0 = &flexcan1;
  23                 can1 = &flexcan2;
  24                 ethernet0 = &fec1;
  25                 ethernet1 = &fec2;
  26                 gpio0 = &gpio1;
  27                 gpio1 = &gpio2;
  28                 gpio2 = &gpio3;
  29                 gpio3 = &gpio4;
  30                 gpio4 = &gpio5;
  31                 gpio5 = &gpio6;
  32                 gpio6 = &gpio7;
  33                 i2c0 = &i2c1;
  34                 i2c1 = &i2c2;
  35                 i2c2 = &i2c3;
  36                 i2c3 = &i2c4;
  37                 mmc0 = &usdhc1;
  38                 mmc1 = &usdhc2;
  39                 mmc2 = &usdhc3;
  40                 mmc3 = &usdhc4;
  41                 serial0 = &uart1;
  42                 serial1 = &uart2;
  43                 serial2 = &uart3;
  44                 serial3 = &uart4;
  45                 serial4 = &uart5;
  46                 serial5 = &uart6;
  47                 spi0 = &ecspi1;
  48                 spi1 = &ecspi2;
  49                 spi2 = &ecspi3;
  50                 spi3 = &ecspi4;
  51                 spi4 = &ecspi5;
  52                 usbphy0 = &usbphy1;
  53                 usbphy1 = &usbphy2;
  54         };
  55
  56         cpus {
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 cpu0: cpu@0 {
  61                         compatible = "arm,cortex-a9";
  62                         device_type = "cpu";
  63                         reg = <0>;
  64                         next-level-cache = <&L2>;
  65                         operating-points = <
  66                                 /* kHz    uV */
  67                                 996000  1250000
  68                                 792000  1175000
  69                                 396000  1075000
  70                                 198000  975000
  71                         >;
  72                         fsl,soc-operating-points = <
  73                                 /* ARM kHz  SOC uV */
  74                                 996000      1175000
  75                                 792000      1175000
  76                                 396000      1175000
  77                                 198000      1175000
  78                         >;
  79                         clock-latency = <61036>; /* two CLK32 periods */
  80                         #cooling-cells = <2>;
  81                         clocks = <&clks IMX6SX_CLK_ARM>,
  82                                  <&clks IMX6SX_CLK_PLL2_PFD2>,
  83                                  <&clks IMX6SX_CLK_STEP>,
  84                                  <&clks IMX6SX_CLK_PLL1_SW>,
  85                                  <&clks IMX6SX_CLK_PLL1_SYS>;
  86                         clock-names = "arm", "pll2_pfd2_396m", "step",
  87                                       "pll1_sw", "pll1_sys";
  88                         arm-supply = <&reg_arm>;
  89                         soc-supply = <&reg_soc>;
  90                 };
  91         };
  92
  93         intc: interrupt-controller@a01000 {
  94                 compatible = "arm,cortex-a9-gic";
  95                 #interrupt-cells = <3>;
  96                 interrupt-controller;
  97                 reg = <0x00a01000 0x1000>,
  98                       <0x00a00100 0x100>;
  99                 interrupt-parent = <&intc>;
 100         };
 101
 102         ckil: clock-ckil {
 103                 compatible = "fixed-clock";
 104                 #clock-cells = <0>;
 105                 clock-frequency = <32768>;
 106                 clock-output-names = "ckil";
 107         };
 108
 109         osc: clock-osc {
 110                 compatible = "fixed-clock";
 111                 #clock-cells = <0>;
 112                 clock-frequency = <24000000>;
 113                 clock-output-names = "osc";
 114         };
 115
 116         ipp_di0: clock-ipp-di0 {
 117                 compatible = "fixed-clock";
 118                 #clock-cells = <0>;
 119                 clock-frequency = <0>;
 120                 clock-output-names = "ipp_di0";
 121         };
 122
 123         ipp_di1: clock-ipp-di1 {
 124                 compatible = "fixed-clock";
 125                 #clock-cells = <0>;
 126                 clock-frequency = <0>;
 127                 clock-output-names = "ipp_di1";
 128         };
 129
 130         anaclk1: clock-anaclk1 {
 131                 compatible = "fixed-clock";
 132                 #clock-cells = <0>;
 133                 clock-frequency = <0>;
 134                 clock-output-names = "anaclk1";
 135         };
 136
 137         anaclk2: clock-anaclk2 {
 138                 compatible = "fixed-clock";
 139                 #clock-cells = <0>;
 140                 clock-frequency = <0>;
 141                 clock-output-names = "anaclk2";
 142         };
 143
 144         tempmon: tempmon {
 145                 compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
 146                 interrupt-parent = <&gpc>;
 147                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 148                 fsl,tempmon = <&anatop>;
 149                 nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 150                 nvmem-cell-names = "calib", "temp_grade";
 151                 clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
 152         };
 153
 154         pmu {
 155                 compatible = "arm,cortex-a9-pmu";
 156                 interrupt-parent = <&gpc>;
 157                 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 158         };
 159
 160         usbphynop1: usbphynop1 {
 161                 compatible = "usb-nop-xceiv";
 162                 #phy-cells = <0>;
 163         };
 164
 165         soc {
 166                 #address-cells = <1>;
 167                 #size-cells = <1>;
 168                 compatible = "simple-bus";
 169                 interrupt-parent = <&gpc>;
 170                 ranges;
 171
 172                 ocram_s: sram@8f8000 {
 173                         compatible = "mmio-sram";
 174                         reg = <0x008f8000 0x4000>;
 175                         clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 176                 };
 177
 178                 ocram: sram@900000 {
 179                         compatible = "mmio-sram";
 180                         reg = <0x00900000 0x20000>;
 181                         clocks = <&clks IMX6SX_CLK_OCRAM>;
 182                 };
 183
 184                 L2: l2-cache@a02000 {
 185                         compatible = "arm,pl310-cache";
 186                         reg = <0x00a02000 0x1000>;
 187                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 188                         cache-unified;
 189                         cache-level = <2>;
 190                         arm,tag-latency = <4 2 3>;
 191                         arm,data-latency = <4 2 3>;
 192                 };
 193
 194                 gpu: gpu@1800000 {
 195                         compatible = "vivante,gc";
 196                         reg = <0x01800000 0x4000>;
 197                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 198                         clocks = <&clks IMX6SX_CLK_GPU>,
 199                                  <&clks IMX6SX_CLK_GPU>,
 200                                  <&clks IMX6SX_CLK_GPU>;
 201                         clock-names = "bus", "core", "shader";
 202                         power-domains = <&pd_pu>;
 203                 };
 204
 205                 dma_apbh: dma-apbh@1804000 {
 206                         compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 207                         reg = <0x01804000 0x2000>;
 208                         interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 209                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 210                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 211                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 212                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 213                         #dma-cells = <1>;
 214                         dma-channels = <4>;
 215                         clocks = <&clks IMX6SX_CLK_APBH_DMA>;
 216                 };
 217
 218                 gpmi: gpmi-nand@1806000{
 219                         compatible = "fsl,imx6sx-gpmi-nand";
 220                         #address-cells = <1>;
 221                         #size-cells = <1>;
 222                         reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
 223                         reg-names = "gpmi-nand", "bch";
 224                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 225                         interrupt-names = "bch";
 226                         clocks = <&clks IMX6SX_CLK_GPMI_IO>,
 227                                  <&clks IMX6SX_CLK_GPMI_APB>,
 228                                  <&clks IMX6SX_CLK_GPMI_BCH>,
 229                                  <&clks IMX6SX_CLK_GPMI_BCH_APB>,
 230                                  <&clks IMX6SX_CLK_PER1_BCH>;
 231                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 232                                       "gpmi_bch_apb", "per1_bch";
 233                         dmas = <&dma_apbh 0>;
 234                         dma-names = "rx-tx";
 235                         status = "disabled";
 236                 };
 237
 238                 aips1: aips-bus@2000000 {
 239                         compatible = "fsl,aips-bus", "simple-bus";
 240                         #address-cells = <1>;
 241                         #size-cells = <1>;
 242                         reg = <0x02000000 0x100000>;
 243                         ranges;
 244
 245                         spba-bus@2000000 {
 246                                 compatible = "fsl,spba-bus", "simple-bus";
 247                                 #address-cells = <1>;
 248                                 #size-cells = <1>;
 249                                 reg = <0x02000000 0x40000>;
 250                                 ranges;
 251
 252                                 spdif: spdif@2004000 {
 253                                         compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
 254                                         reg = <0x02004000 0x4000>;
 255                                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 256                                         dmas = <&sdma 14 18 0>,
 257                                                <&sdma 15 18 0>;
 258                                         dma-names = "rx", "tx";
 259                                         clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
 260                                                  <&clks IMX6SX_CLK_OSC>,
 261                                                  <&clks IMX6SX_CLK_SPDIF>,
 262                                                  <&clks 0>, <&clks 0>, <&clks 0>,
 263                                                  <&clks IMX6SX_CLK_IPG>,
 264                                                  <&clks 0>, <&clks 0>,
 265                                                  <&clks IMX6SX_CLK_SPBA>;
 266                                         clock-names = "core", "rxtx0",
 267                                                       "rxtx1", "rxtx2",
 268                                                       "rxtx3", "rxtx4",
 269                                                       "rxtx5", "rxtx6",
 270                                                       "rxtx7", "spba";
 271                                         status = "disabled";
 272                                 };
 273
 274                                 ecspi1: spi@2008000 {
 275                                         #address-cells = <1>;
 276                                         #size-cells = <0>;
 277                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 278                                         reg = <0x02008000 0x4000>;
 279                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 280                                         clocks = <&clks IMX6SX_CLK_ECSPI1>,
 281                                                  <&clks IMX6SX_CLK_ECSPI1>;
 282                                         clock-names = "ipg", "per";
 283                                         status = "disabled";
 284                                 };
 285
 286                                 ecspi2: spi@200c000 {
 287                                         #address-cells = <1>;
 288                                         #size-cells = <0>;
 289                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 290                                         reg = <0x0200c000 0x4000>;
 291                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 292                                         clocks = <&clks IMX6SX_CLK_ECSPI2>,
 293                                                  <&clks IMX6SX_CLK_ECSPI2>;
 294                                         clock-names = "ipg", "per";
 295                                         status = "disabled";
 296                                 };
 297
 298                                 ecspi3: spi@2010000 {
 299                                         #address-cells = <1>;
 300                                         #size-cells = <0>;
 301                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 302                                         reg = <0x02010000 0x4000>;
 303                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 304                                         clocks = <&clks IMX6SX_CLK_ECSPI3>,
 305                                                  <&clks IMX6SX_CLK_ECSPI3>;
 306                                         clock-names = "ipg", "per";
 307                                         status = "disabled";
 308                                 };
 309
 310                                 ecspi4: spi@2014000 {
 311                                         #address-cells = <1>;
 312                                         #size-cells = <0>;
 313                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 314                                         reg = <0x02014000 0x4000>;
 315                                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 316                                         clocks = <&clks IMX6SX_CLK_ECSPI4>,
 317                                                  <&clks IMX6SX_CLK_ECSPI4>;
 318                                         clock-names = "ipg", "per";
 319                                         status = "disabled";
 320                                 };
 321
 322                                 uart1: serial@2020000 {
 323                                         compatible = "fsl,imx6sx-uart",
 324                                                      "fsl,imx6q-uart", "fsl,imx21-uart";
 325                                         reg = <0x02020000 0x4000>;
 326                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 327                                         clocks = <&clks IMX6SX_CLK_UART_IPG>,
 328                                                  <&clks IMX6SX_CLK_UART_SERIAL>;
 329                                         clock-names = "ipg", "per";
 330                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 331                                         dma-names = "rx", "tx";
 332                                         status = "disabled";
 333                                 };
 334
 335                                 esai: esai@2024000 {
 336                                         reg = <0x02024000 0x4000>;
 337                                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 338                                         clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
 339                                                  <&clks IMX6SX_CLK_ESAI_MEM>,
 340                                                  <&clks IMX6SX_CLK_ESAI_EXTAL>,
 341                                                  <&clks IMX6SX_CLK_ESAI_IPG>,
 342                                                  <&clks IMX6SX_CLK_SPBA>;
 343                                         clock-names = "core", "mem", "extal",
 344                                                       "fsys", "spba";
 345                                         status = "disabled";
 346                                 };
 347
 348                                 ssi1: ssi@2028000 {
 349                                         #sound-dai-cells = <0>;
 350                                         compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 351                                         reg = <0x02028000 0x4000>;
 352                                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 353                                         clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
 354                                                  <&clks IMX6SX_CLK_SSI1>;
 355                                         clock-names = "ipg", "baud";
 356                                         dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
 357                                         dma-names = "rx", "tx";
 358                                         fsl,fifo-depth = <15>;
 359                                         status = "disabled";
 360                                 };
 361
 362                                 ssi2: ssi@202c000 {
 363                                         #sound-dai-cells = <0>;
 364                                         compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 365                                         reg = <0x0202c000 0x4000>;
 366                                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 367                                         clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
 368                                                  <&clks IMX6SX_CLK_SSI2>;
 369                                         clock-names = "ipg", "baud";
 370                                         dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
 371                                         dma-names = "rx", "tx";
 372                                         fsl,fifo-depth = <15>;
 373                                         status = "disabled";
 374                                 };
 375
 376                                 ssi3: ssi@2030000 {
 377                                         #sound-dai-cells = <0>;
 378                                         compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 379                                         reg = <0x02030000 0x4000>;
 380                                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 381                                         clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
 382                                                  <&clks IMX6SX_CLK_SSI3>;
 383                                         clock-names = "ipg", "baud";
 384                                         dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
 385                                         dma-names = "rx", "tx";
 386                                         fsl,fifo-depth = <15>;
 387                                         status = "disabled";
 388                                 };
 389
 390                                 asrc: asrc@2034000 {
 391                                         reg = <0x02034000 0x4000>;
 392                                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 393                                         clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
 394                                                  <&clks IMX6SX_CLK_ASRC_IPG>,
 395                                                  <&clks IMX6SX_CLK_SPDIF>,
 396                                                  <&clks IMX6SX_CLK_SPBA>;
 397                                         clock-names = "mem", "ipg", "asrck", "spba";
 398                                         dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
 399                                                <&sdma 19 20 1>, <&sdma 20 20 1>,
 400                                                <&sdma 21 20 1>, <&sdma 22 20 1>;
 401                                         dma-names = "rxa", "rxb", "rxc",
 402                                                     "txa", "txb", "txc";
 403                                         status = "okay";
 404                                 };
 405                         };
 406
 407                         pwm1: pwm@2080000 {
 408                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 409                                 reg = <0x02080000 0x4000>;
 410                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 411                                 clocks = <&clks IMX6SX_CLK_PWM1>,
 412                                          <&clks IMX6SX_CLK_PWM1>;
 413                                 clock-names = "ipg", "per";
 414                                 #pwm-cells = <2>;
 415                         };
 416
 417                         pwm2: pwm@2084000 {
 418                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 419                                 reg = <0x02084000 0x4000>;
 420                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 421                                 clocks = <&clks IMX6SX_CLK_PWM2>,
 422                                          <&clks IMX6SX_CLK_PWM2>;
 423                                 clock-names = "ipg", "per";
 424                                 #pwm-cells = <2>;
 425                         };
 426
 427                         pwm3: pwm@2088000 {
 428                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 429                                 reg = <0x02088000 0x4000>;
 430                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 431                                 clocks = <&clks IMX6SX_CLK_PWM3>,
 432                                          <&clks IMX6SX_CLK_PWM3>;
 433                                 clock-names = "ipg", "per";
 434                                 #pwm-cells = <2>;
 435                         };
 436
 437                         pwm4: pwm@208c000 {
 438                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 439                                 reg = <0x0208c000 0x4000>;
 440                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 441                                 clocks = <&clks IMX6SX_CLK_PWM4>,
 442                                          <&clks IMX6SX_CLK_PWM4>;
 443                                 clock-names = "ipg", "per";
 444                                 #pwm-cells = <2>;
 445                         };
 446
 447                         flexcan1: can@2090000 {
 448                                 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 449                                 reg = <0x02090000 0x4000>;
 450                                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 451                                 clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
 452                                          <&clks IMX6SX_CLK_CAN1_SERIAL>;
 453                                 clock-names = "ipg", "per";
 454                                 fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
 455                                 status = "disabled";
 456                         };
 457
 458                         flexcan2: can@2094000 {
 459                                 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 460                                 reg = <0x02094000 0x4000>;
 461                                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 462                                 clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
 463                                          <&clks IMX6SX_CLK_CAN2_SERIAL>;
 464                                 clock-names = "ipg", "per";
 465                                 fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
 466                                 status = "disabled";
 467                         };
 468
 469                         gpt: gpt@2098000 {
 470                                 compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
 471                                 reg = <0x02098000 0x4000>;
 472                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 473                                 clocks = <&clks IMX6SX_CLK_GPT_BUS>,
 474                                          <&clks IMX6SX_CLK_GPT_3M>;
 475                                 clock-names = "ipg", "per";
 476                         };
 477
 478                         gpio1: gpio@209c000 {
 479                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 480                                 reg = <0x0209c000 0x4000>;
 481                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 482                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 483                                 gpio-controller;
 484                                 #gpio-cells = <2>;
 485                                 interrupt-controller;
 486                                 #interrupt-cells = <2>;
 487                                 gpio-ranges = <&iomuxc 0 5 26>;
 488                         };
 489
 490                         gpio2: gpio@20a0000 {
 491                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 492                                 reg = <0x020a0000 0x4000>;
 493                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 494                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 495                                 gpio-controller;
 496                                 #gpio-cells = <2>;
 497                                 interrupt-controller;
 498                                 #interrupt-cells = <2>;
 499                                 gpio-ranges = <&iomuxc 0 31 20>;
 500                         };
 501
 502                         gpio3: gpio@20a4000 {
 503                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 504                                 reg = <0x020a4000 0x4000>;
 505                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 506                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 507                                 gpio-controller;
 508                                 #gpio-cells = <2>;
 509                                 interrupt-controller;
 510                                 #interrupt-cells = <2>;
 511                                 gpio-ranges = <&iomuxc 0 51 29>;
 512                         };
 513
 514                         gpio4: gpio@20a8000 {
 515                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 516                                 reg = <0x020a8000 0x4000>;
 517                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 518                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 519                                 gpio-controller;
 520                                 #gpio-cells = <2>;
 521                                 interrupt-controller;
 522                                 #interrupt-cells = <2>;
 523                                 gpio-ranges = <&iomuxc 0 80 32>;
 524                         };
 525
 526                         gpio5: gpio@20ac000 {
 527                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 528                                 reg = <0x020ac000 0x4000>;
 529                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 530                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 531                                 gpio-controller;
 532                                 #gpio-cells = <2>;
 533                                 interrupt-controller;
 534                                 #interrupt-cells = <2>;
 535                                 gpio-ranges = <&iomuxc 0 112 24>;
 536                         };
 537
 538                         gpio6: gpio@20b0000 {
 539                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 540                                 reg = <0x020b0000 0x4000>;
 541                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 542                                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 543                                 gpio-controller;
 544                                 #gpio-cells = <2>;
 545                                 interrupt-controller;
 546                                 #interrupt-cells = <2>;
 547                                 gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
 548                         };
 549
 550                         gpio7: gpio@20b4000 {
 551                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 552                                 reg = <0x020b4000 0x4000>;
 553                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 554                                              <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 555                                 gpio-controller;
 556                                 #gpio-cells = <2>;
 557                                 interrupt-controller;
 558                                 #interrupt-cells = <2>;
 559                                 gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 560                         };
 561
 562                         kpp: kpp@20b8000 {
 563                                 compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
 564                                 reg = <0x020b8000 0x4000>;
 565                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 566                                 clocks = <&clks IMX6SX_CLK_IPG>;
 567                                 status = "disabled";
 568                         };
 569
 570                         wdog1: wdog@20bc000 {
 571                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 572                                 reg = <0x020bc000 0x4000>;
 573                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 574                                 clocks = <&clks IMX6SX_CLK_IPG>;
 575                         };
 576
 577                         wdog2: wdog@20c0000 {
 578                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 579                                 reg = <0x020c0000 0x4000>;
 580                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 581                                 clocks = <&clks IMX6SX_CLK_IPG>;
 582                                 status = "disabled";
 583                         };
 584
 585                         clks: ccm@20c4000 {
 586                                 compatible = "fsl,imx6sx-ccm";
 587                                 reg = <0x020c4000 0x4000>;
 588                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 589                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 590                                 #clock-cells = <1>;
 591                                 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
 592                                 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
 593                         };
 594
 595                         anatop: anatop@20c8000 {
 596                                 compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
 597                                              "syscon", "simple-bus";
 598                                 reg = <0x020c8000 0x1000>;
 599                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 600                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 601                                              <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 602
 603                                 regulator-1p1 {
 604                                         compatible = "fsl,anatop-regulator";
 605                                         regulator-name = "vdd1p1";
 606                                         regulator-min-microvolt = <1000000>;
 607                                         regulator-max-microvolt = <1200000>;
 608                                         regulator-always-on;
 609                                         anatop-reg-offset = <0x110>;
 610                                         anatop-vol-bit-shift = <8>;
 611                                         anatop-vol-bit-width = <5>;
 612                                         anatop-min-bit-val = <4>;
 613                                         anatop-min-voltage = <800000>;
 614                                         anatop-max-voltage = <1375000>;
 615                                         anatop-enable-bit = <0>;
 616                                 };
 617
 618                                 regulator-3p0 {
 619                                         compatible = "fsl,anatop-regulator";
 620                                         regulator-name = "vdd3p0";
 621                                         regulator-min-microvolt = <2800000>;
 622                                         regulator-max-microvolt = <3150000>;
 623                                         regulator-always-on;
 624                                         anatop-reg-offset = <0x120>;
 625                                         anatop-vol-bit-shift = <8>;
 626                                         anatop-vol-bit-width = <5>;
 627                                         anatop-min-bit-val = <0>;
 628                                         anatop-min-voltage = <2625000>;
 629                                         anatop-max-voltage = <3400000>;
 630                                         anatop-enable-bit = <0>;
 631                                 };
 632
 633                                 regulator-2p5 {
 634                                         compatible = "fsl,anatop-regulator";
 635                                         regulator-name = "vdd2p5";
 636                                         regulator-min-microvolt = <2250000>;
 637                                         regulator-max-microvolt = <2750000>;
 638                                         regulator-always-on;
 639                                         anatop-reg-offset = <0x130>;
 640                                         anatop-vol-bit-shift = <8>;
 641                                         anatop-vol-bit-width = <5>;
 642                                         anatop-min-bit-val = <0>;
 643                                         anatop-min-voltage = <2100000>;
 644                                         anatop-max-voltage = <2875000>;
 645                                         anatop-enable-bit = <0>;
 646                                 };
 647
 648                                 reg_arm: regulator-vddcore {
 649                                         compatible = "fsl,anatop-regulator";
 650                                         regulator-name = "vddarm";
 651                                         regulator-min-microvolt = <725000>;
 652                                         regulator-max-microvolt = <1450000>;
 653                                         regulator-always-on;
 654                                         anatop-reg-offset = <0x140>;
 655                                         anatop-vol-bit-shift = <0>;
 656                                         anatop-vol-bit-width = <5>;
 657                                         anatop-delay-reg-offset = <0x170>;
 658                                         anatop-delay-bit-shift = <24>;
 659                                         anatop-delay-bit-width = <2>;
 660                                         anatop-min-bit-val = <1>;
 661                                         anatop-min-voltage = <725000>;
 662                                         anatop-max-voltage = <1450000>;
 663                                 };
 664
 665                                 reg_pcie: regulator-vddpcie {
 666                                         compatible = "fsl,anatop-regulator";
 667                                         regulator-name = "vddpcie";
 668                                         regulator-min-microvolt = <725000>;
 669                                         regulator-max-microvolt = <1450000>;
 670                                         anatop-reg-offset = <0x140>;
 671                                         anatop-vol-bit-shift = <9>;
 672                                         anatop-vol-bit-width = <5>;
 673                                         anatop-delay-reg-offset = <0x170>;
 674                                         anatop-delay-bit-shift = <26>;
 675                                         anatop-delay-bit-width = <2>;
 676                                         anatop-min-bit-val = <1>;
 677                                         anatop-min-voltage = <725000>;
 678                                         anatop-max-voltage = <1450000>;
 679                                 };
 680
 681                                 reg_soc: regulator-vddsoc {
 682                                         compatible = "fsl,anatop-regulator";
 683                                         regulator-name = "vddsoc";
 684                                         regulator-min-microvolt = <725000>;
 685                                         regulator-max-microvolt = <1450000>;
 686                                         regulator-always-on;
 687                                         anatop-reg-offset = <0x140>;
 688                                         anatop-vol-bit-shift = <18>;
 689                                         anatop-vol-bit-width = <5>;
 690                                         anatop-delay-reg-offset = <0x170>;
 691                                         anatop-delay-bit-shift = <28>;
 692                                         anatop-delay-bit-width = <2>;
 693                                         anatop-min-bit-val = <1>;
 694                                         anatop-min-voltage = <725000>;
 695                                         anatop-max-voltage = <1450000>;
 696                                 };
 697                         };
 698
 699                         usbphy1: usbphy@20c9000 {
 700                                 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 701                                 reg = <0x020c9000 0x1000>;
 702                                 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 703                                 clocks = <&clks IMX6SX_CLK_USBPHY1>;
 704                                 fsl,anatop = <&anatop>;
 705                         };
 706
 707                         usbphy2: usbphy@20ca000 {
 708                                 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 709                                 reg = <0x020ca000 0x1000>;
 710                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 711                                 clocks = <&clks IMX6SX_CLK_USBPHY2>;
 712                                 fsl,anatop = <&anatop>;
 713                         };
 714
 715                         snvs: snvs@20cc000 {
 716                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 717                                 reg = <0x020cc000 0x4000>;
 718
 719                                 snvs_rtc: snvs-rtc-lp {
 720                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 721                                         regmap = <&snvs>;
 722                                         offset = <0x34>;
 723                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 724                                 };
 725
 726                                 snvs_poweroff: snvs-poweroff {
 727                                         compatible = "syscon-poweroff";
 728                                         regmap = <&snvs>;
 729                                         offset = <0x38>;
 730                                         value = <0x60>;
 731                                         mask = <0x60>;
 732                                         status = "disabled";
 733                                 };
 734
 735                                 snvs_pwrkey: snvs-powerkey {
 736                                         compatible = "fsl,sec-v4.0-pwrkey";
 737                                         regmap = <&snvs>;
 738                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 739                                         linux,keycode = <KEY_POWER>;
 740                                         wakeup-source;
 741                                 };
 742                         };
 743
 744                         epit1: epit@20d0000 {
 745                                 reg = <0x020d0000 0x4000>;
 746                                 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 747                         };
 748
 749                         epit2: epit@20d4000 {
 750                                 reg = <0x020d4000 0x4000>;
 751                                 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 752                         };
 753
 754                         src: src@20d8000 {
 755                                 compatible = "fsl,imx6sx-src", "fsl,imx51-src";
 756                                 reg = <0x020d8000 0x4000>;
 757                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
 758                                              <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 759                                 #reset-cells = <1>;
 760                         };
 761
 762                         gpc: gpc@20dc000 {
 763                                 compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
 764                                 reg = <0x020dc000 0x4000>;
 765                                 interrupt-controller;
 766                                 #interrupt-cells = <3>;
 767                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 768                                 interrupt-parent = <&intc>;
 769                                 clocks = <&clks IMX6SX_CLK_IPG>;
 770                                 clock-names = "ipg";
 771
 772                                 pgc {
 773                                         #address-cells = <1>;
 774                                         #size-cells = <0>;
 775
 776                                         power-domain@0 {
 777                                                 reg = <0>;
 778                                                 #power-domain-cells = <0>;
 779                                         };
 780
 781                                         pd_pu: power-domain@1 {
 782                                                 reg = <1>;
 783                                                 #power-domain-cells = <0>;
 784                                                 power-supply = <&reg_soc>;
 785                                                 clocks = <&clks IMX6SX_CLK_GPU>;
 786                                         };
 787
 788                                         pd_disp: power-domain@2 {
 789                                                 reg = <2>;
 790                                                 #power-domain-cells = <0>;
 791                                                 clocks = <&clks IMX6SX_CLK_PXP_AXI>,
 792                                                          <&clks IMX6SX_CLK_DISPLAY_AXI>,
 793                                                          <&clks IMX6SX_CLK_LCDIF1_PIX>,
 794                                                          <&clks IMX6SX_CLK_LCDIF_APB>,
 795                                                          <&clks IMX6SX_CLK_LCDIF2_PIX>,
 796                                                          <&clks IMX6SX_CLK_CSI>,
 797                                                          <&clks IMX6SX_CLK_VADC>;
 798                                         };
 799
 800                                         pd_pci: power-domain@3 {
 801                                                 reg = <3>;
 802                                                 #power-domain-cells = <0>;
 803                                                 power-supply = <&reg_pcie>;
 804                                         };
 805                                 };
 806                         };
 807
 808                         iomuxc: iomuxc@20e0000 {
 809                                 compatible = "fsl,imx6sx-iomuxc";
 810                                 reg = <0x020e0000 0x4000>;
 811                         };
 812
 813                         gpr: iomuxc-gpr@20e4000 {
 814                                 compatible = "fsl,imx6sx-iomuxc-gpr",
 815                                              "fsl,imx6q-iomuxc-gpr", "syscon";
 816                                 reg = <0x020e4000 0x4000>;
 817                         };
 818
 819                         sdma: sdma@20ec000 {
 820                                 compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 821                                 reg = <0x020ec000 0x4000>;
 822                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 823                                 clocks = <&clks IMX6SX_CLK_SDMA>,
 824                                          <&clks IMX6SX_CLK_SDMA>;
 825                                 clock-names = "ipg", "ahb";
 826                                 #dma-cells = <3>;
 827                                 /* imx6sx reuses imx6q sdma firmware */
 828                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 829                         };
 830                 };
 831
 832                 aips2: aips-bus@2100000 {
 833                         compatible = "fsl,aips-bus", "simple-bus";
 834                         #address-cells = <1>;
 835                         #size-cells = <1>;
 836                         reg = <0x02100000 0x100000>;
 837                         ranges;
 838
 839                         crypto: caam@2100000 {
 840                                 compatible = "fsl,sec-v4.0";
 841                                 #address-cells = <1>;
 842                                 #size-cells = <1>;
 843                                 reg = <0x2100000 0x10000>;
 844                                 ranges = <0 0x2100000 0x10000>;
 845                                 interrupt-parent = <&intc>;
 846                                 clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
 847                                          <&clks IMX6SX_CLK_CAAM_ACLK>,
 848                                          <&clks IMX6SX_CLK_CAAM_IPG>,
 849                                          <&clks IMX6SX_CLK_EIM_SLOW>;
 850                                 clock-names = "mem", "aclk", "ipg", "emi_slow";
 851
 852                                 sec_jr0: jr0@1000 {
 853                                         compatible = "fsl,sec-v4.0-job-ring";
 854                                         reg = <0x1000 0x1000>;
 855                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 856                                 };
 857
 858                                 sec_jr1: jr1@2000 {
 859                                         compatible = "fsl,sec-v4.0-job-ring";
 860                                         reg = <0x2000 0x1000>;
 861                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 862                                 };
 863                         };
 864
 865                         usbotg1: usb@2184000 {
 866                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 867                                 reg = <0x02184000 0x200>;
 868                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 869                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 870                                 fsl,usbphy = <&usbphy1>;
 871                                 fsl,usbmisc = <&usbmisc 0>;
 872                                 fsl,anatop = <&anatop>;
 873                                 ahb-burst-config = <0x0>;
 874                                 tx-burst-size-dword = <0x10>;
 875                                 rx-burst-size-dword = <0x10>;
 876                                 status = "disabled";
 877                         };
 878
 879                         usbotg2: usb@2184200 {
 880                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 881                                 reg = <0x02184200 0x200>;
 882                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 883                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 884                                 fsl,usbphy = <&usbphy2>;
 885                                 fsl,usbmisc = <&usbmisc 1>;
 886                                 ahb-burst-config = <0x0>;
 887                                 tx-burst-size-dword = <0x10>;
 888                                 rx-burst-size-dword = <0x10>;
 889                                 status = "disabled";
 890                         };
 891
 892                         usbh: usb@2184400 {
 893                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 894                                 reg = <0x02184400 0x200>;
 895                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 896                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 897                                 fsl,usbphy = <&usbphynop1>;
 898                                 fsl,usbmisc = <&usbmisc 2>;
 899                                 phy_type = "hsic";
 900                                 fsl,anatop = <&anatop>;
 901                                 dr_mode = "host";
 902                                 ahb-burst-config = <0x0>;
 903                                 tx-burst-size-dword = <0x10>;
 904                                 rx-burst-size-dword = <0x10>;
 905                                 status = "disabled";
 906                         };
 907
 908                         usbmisc: usbmisc@2184800 {
 909                                 #index-cells = <1>;
 910                                 compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
 911                                 reg = <0x02184800 0x200>;
 912                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 913                         };
 914
 915                         fec1: ethernet@2188000 {
 916                                 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 917                                 reg = <0x02188000 0x4000>;
 918                                 interrupt-names = "int0", "pps";
 919                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 920                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 921                                 clocks = <&clks IMX6SX_CLK_ENET>,
 922                                          <&clks IMX6SX_CLK_ENET_AHB>,
 923                                          <&clks IMX6SX_CLK_ENET_PTP>,
 924                                          <&clks IMX6SX_CLK_ENET_REF>,
 925                                          <&clks IMX6SX_CLK_ENET_PTP>;
 926                                 clock-names = "ipg", "ahb", "ptp",
 927                                               "enet_clk_ref", "enet_out";
 928                                 fsl,num-tx-queues=<3>;
 929                                 fsl,num-rx-queues=<3>;
 930                                 status = "disabled";
 931                         };
 932
 933                         mlb: mlb@218c000 {
 934                                 reg = <0x0218c000 0x4000>;
 935                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 936                                              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 937                                              <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 938                                 clocks = <&clks IMX6SX_CLK_MLB>;
 939                                 status = "disabled";
 940                         };
 941
 942                         usdhc1: usdhc@2190000 {
 943                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 944                                 reg = <0x02190000 0x4000>;
 945                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 946                                 clocks = <&clks IMX6SX_CLK_USDHC1>,
 947                                          <&clks IMX6SX_CLK_USDHC1>,
 948                                          <&clks IMX6SX_CLK_USDHC1>;
 949                                 clock-names = "ipg", "ahb", "per";
 950                                 bus-width = <4>;
 951                                 status = "disabled";
 952                         };
 953
 954                         usdhc2: usdhc@2194000 {
 955                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 956                                 reg = <0x02194000 0x4000>;
 957                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 958                                 clocks = <&clks IMX6SX_CLK_USDHC2>,
 959                                          <&clks IMX6SX_CLK_USDHC2>,
 960                                          <&clks IMX6SX_CLK_USDHC2>;
 961                                 clock-names = "ipg", "ahb", "per";
 962                                 bus-width = <4>;
 963                                 status = "disabled";
 964                         };
 965
 966                         usdhc3: usdhc@2198000 {
 967                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 968                                 reg = <0x02198000 0x4000>;
 969                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 970                                 clocks = <&clks IMX6SX_CLK_USDHC3>,
 971                                          <&clks IMX6SX_CLK_USDHC3>,
 972                                          <&clks IMX6SX_CLK_USDHC3>;
 973                                 clock-names = "ipg", "ahb", "per";
 974                                 bus-width = <4>;
 975                                 status = "disabled";
 976                         };
 977
 978                         usdhc4: usdhc@219c000 {
 979                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 980                                 reg = <0x0219c000 0x4000>;
 981                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 982                                 clocks = <&clks IMX6SX_CLK_USDHC4>,
 983                                          <&clks IMX6SX_CLK_USDHC4>,
 984                                          <&clks IMX6SX_CLK_USDHC4>;
 985                                 clock-names = "ipg", "ahb", "per";
 986                                 bus-width = <4>;
 987                                 status = "disabled";
 988                         };
 989
 990                         i2c1: i2c@21a0000 {
 991                                 #address-cells = <1>;
 992                                 #size-cells = <0>;
 993                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
 994                                 reg = <0x021a0000 0x4000>;
 995                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 996                                 clocks = <&clks IMX6SX_CLK_I2C1>;
 997                                 status = "disabled";
 998                         };
 999
1000                         i2c2: i2c@21a4000 {
1001                                 #address-cells = <1>;
1002                                 #size-cells = <0>;
1003                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1004                                 reg = <0x021a4000 0x4000>;
1005                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1006                                 clocks = <&clks IMX6SX_CLK_I2C2>;
1007                                 status = "disabled";
1008                         };
1009
1010                         i2c3: i2c@21a8000 {
1011                                 #address-cells = <1>;
1012                                 #size-cells = <0>;
1013                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1014                                 reg = <0x021a8000 0x4000>;
1015                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1016                                 clocks = <&clks IMX6SX_CLK_I2C3>;
1017                                 status = "disabled";
1018                         };
1019
1020                         mmdc: mmdc@21b0000 {
1021                                 compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
1022                                 reg = <0x021b0000 0x4000>;
1023                                 clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>;
1024                         };
1025
1026                         fec2: ethernet@21b4000 {
1027                                 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
1028                                 reg = <0x021b4000 0x4000>;
1029                                 interrupt-names = "int0", "pps";
1030                                 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1031                                              <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1032                                 clocks = <&clks IMX6SX_CLK_ENET>,
1033                                          <&clks IMX6SX_CLK_ENET_AHB>,
1034                                          <&clks IMX6SX_CLK_ENET_PTP>,
1035                                          <&clks IMX6SX_CLK_ENET2_REF_125M>,
1036                                          <&clks IMX6SX_CLK_ENET_PTP>;
1037                                 clock-names = "ipg", "ahb", "ptp",
1038                                               "enet_clk_ref", "enet_out";
1039                                 status = "disabled";
1040                         };
1041
1042                         weim: weim@21b8000 {
1043                                 #address-cells = <2>;
1044                                 #size-cells = <1>;
1045                                 compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
1046                                 reg = <0x021b8000 0x4000>;
1047                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1048                                 clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
1049                                 fsl,weim-cs-gpr = <&gpr>;
1050                                 status = "disabled";
1051                         };
1052
1053                         ocotp: ocotp@21bc000 {
1054                                 #address-cells = <1>;
1055                                 #size-cells = <1>;
1056                                 compatible = "fsl,imx6sx-ocotp", "syscon";
1057                                 reg = <0x021bc000 0x4000>;
1058                                 clocks = <&clks IMX6SX_CLK_OCOTP>;
1059
1060                                 tempmon_calib: calib@38 {
1061                                         reg = <0x38 4>;
1062                                 };
1063
1064                                 tempmon_temp_grade: temp-grade@20 {
1065                                         reg = <0x20 4>;
1066                                 };
1067                         };
1068
1069                         sai1: sai@21d4000 {
1070                                 compatible = "fsl,imx6sx-sai";
1071                                 reg = <0x021d4000 0x4000>;
1072                                 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1073                                 clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
1074                                          <&clks IMX6SX_CLK_SAI1>,
1075                                          <&clks 0>, <&clks 0>;
1076                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
1077                                 dma-names = "rx", "tx";
1078                                 dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
1079                                 status = "disabled";
1080                         };
1081
1082                         audmux: audmux@21d8000 {
1083                                 compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
1084                                 reg = <0x021d8000 0x4000>;
1085                                 status = "disabled";
1086                         };
1087
1088                         sai2: sai@21dc000 {
1089                                 compatible = "fsl,imx6sx-sai";
1090                                 reg = <0x021dc000 0x4000>;
1091                                 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1092                                 clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
1093                                          <&clks IMX6SX_CLK_SAI2>,
1094                                          <&clks 0>, <&clks 0>;
1095                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
1096                                 dma-names = "rx", "tx";
1097                                 dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
1098                                 status = "disabled";
1099                         };
1100
1101                         qspi1: spi@21e0000 {
1102                                 #address-cells = <1>;
1103                                 #size-cells = <0>;
1104                                 compatible = "fsl,imx6sx-qspi";
1105                                 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
1106                                 reg-names = "QuadSPI", "QuadSPI-memory";
1107                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1108                                 clocks = <&clks IMX6SX_CLK_QSPI1>,
1109                                          <&clks IMX6SX_CLK_QSPI1>;
1110                                 clock-names = "qspi_en", "qspi";
1111                                 status = "disabled";
1112                         };
1113
1114                         qspi2: spi@21e4000 {
1115                                 #address-cells = <1>;
1116                                 #size-cells = <0>;
1117                                 compatible = "fsl,imx6sx-qspi";
1118                                 reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
1119                                 reg-names = "QuadSPI", "QuadSPI-memory";
1120                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
1121                                 clocks = <&clks IMX6SX_CLK_QSPI2>,
1122                                          <&clks IMX6SX_CLK_QSPI2>;
1123                                 clock-names = "qspi_en", "qspi";
1124                                 status = "disabled";
1125                         };
1126
1127                         uart2: serial@21e8000 {
1128                                 compatible = "fsl,imx6sx-uart",
1129                                              "fsl,imx6q-uart", "fsl,imx21-uart";
1130                                 reg = <0x021e8000 0x4000>;
1131                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
1132                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1133                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1134                                 clock-names = "ipg", "per";
1135                                 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1136                                 dma-names = "rx", "tx";
1137                                 status = "disabled";
1138                         };
1139
1140                         uart3: serial@21ec000 {
1141                                 compatible = "fsl,imx6sx-uart",
1142                                              "fsl,imx6q-uart", "fsl,imx21-uart";
1143                                 reg = <0x021ec000 0x4000>;
1144                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
1145                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1146                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1147                                 clock-names = "ipg", "per";
1148                                 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1149                                 dma-names = "rx", "tx";
1150                                 status = "disabled";
1151                         };
1152
1153                         uart4: serial@21f0000 {
1154                                 compatible = "fsl,imx6sx-uart",
1155                                              "fsl,imx6q-uart", "fsl,imx21-uart";
1156                                 reg = <0x021f0000 0x4000>;
1157                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1158                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1159                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1160                                 clock-names = "ipg", "per";
1161                                 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1162                                 dma-names = "rx", "tx";
1163                                 status = "disabled";
1164                         };
1165
1166                         uart5: serial@21f4000 {
1167                                 compatible = "fsl,imx6sx-uart",
1168                                              "fsl,imx6q-uart", "fsl,imx21-uart";
1169                                 reg = <0x021f4000 0x4000>;
1170                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1171                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1172                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1173                                 clock-names = "ipg", "per";
1174                                 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1175                                 dma-names = "rx", "tx";
1176                                 status = "disabled";
1177                         };
1178
1179                         i2c4: i2c@21f8000 {
1180                                 #address-cells = <1>;
1181                                 #size-cells = <0>;
1182                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1183                                 reg = <0x021f8000 0x4000>;
1184                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1185                                 clocks = <&clks IMX6SX_CLK_I2C4>;
1186                                 status = "disabled";
1187                         };
1188                 };
1189
1190                 aips3: aips-bus@2200000 {
1191                         compatible = "fsl,aips-bus", "simple-bus";
1192                         #address-cells = <1>;
1193                         #size-cells = <1>;
1194                         reg = <0x02200000 0x100000>;
1195                         ranges;
1196
1197                         spba-bus@2240000 {
1198                                 compatible = "fsl,spba-bus", "simple-bus";
1199                                 #address-cells = <1>;
1200                                 #size-cells = <1>;
1201                                 reg = <0x02240000 0x40000>;
1202                                 ranges;
1203
1204                                 csi1: csi@2214000 {
1205                                         reg = <0x02214000 0x4000>;
1206                                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1207                                         clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1208                                                  <&clks IMX6SX_CLK_CSI>,
1209                                                  <&clks IMX6SX_CLK_DCIC1>;
1210                                         clock-names = "disp-axi", "csi_mclk", "dcic";
1211                                         status = "disabled";
1212                                 };
1213
1214                                 pxp: pxp@2218000 {
1215                                         compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp";
1216                                         reg = <0x02218000 0x4000>;
1217                                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1218                                         clocks = <&clks IMX6SX_CLK_PXP_AXI>;
1219                                         clock-names = "axi";
1220                                         power-domains = <&pd_disp>;
1221                                         status = "disabled";
1222                                 };
1223
1224                                 csi2: csi@221c000 {
1225                                         reg = <0x0221c000 0x4000>;
1226                                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1227                                         clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1228                                                  <&clks IMX6SX_CLK_CSI>,
1229                                                  <&clks IMX6SX_CLK_DCIC2>;
1230                                         clock-names = "disp-axi", "csi_mclk", "dcic";
1231                                         status = "disabled";
1232                                 };
1233
1234                                 lcdif1: lcdif@2220000 {
1235                                         compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1236                                         reg = <0x02220000 0x4000>;
1237                                         interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
1238                                         clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
1239                                                  <&clks IMX6SX_CLK_LCDIF_APB>,
1240                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1241                                         clock-names = "pix", "axi", "disp_axi";
1242                                         power-domains = <&pd_disp>;
1243                                         status = "disabled";
1244                                 };
1245
1246                                 lcdif2: lcdif@2224000 {
1247                                         compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1248                                         reg = <0x02224000 0x4000>;
1249                                         interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
1250                                         clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
1251                                                  <&clks IMX6SX_CLK_LCDIF_APB>,
1252                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1253                                         clock-names = "pix", "axi", "disp_axi";
1254                                         power-domains = <&pd_disp>;
1255                                         status = "disabled";
1256                                 };
1257
1258                                 vadc: vadc@2228000 {
1259                                         reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
1260                                         reg-names = "vadc-vafe", "vadc-vdec";
1261                                         clocks = <&clks IMX6SX_CLK_VADC>,
1262                                                  <&clks IMX6SX_CLK_CSI>;
1263                                         clock-names = "vadc", "csi";
1264                                         power-domains = <&pd_disp>;
1265                                         status = "disabled";
1266                                 };
1267                         };
1268
1269                         adc1: adc@2280000 {
1270                                 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1271                                 reg = <0x02280000 0x4000>;
1272                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1273                                 clocks = <&clks IMX6SX_CLK_IPG>;
1274                                 clock-names = "adc";
1275                                 fsl,adck-max-frequency = <30000000>, <40000000>,
1276                                                          <20000000>;
1277                                 status = "disabled";
1278                         };
1279
1280                         adc2: adc@2284000 {
1281                                 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1282                                 reg = <0x02284000 0x4000>;
1283                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1284                                 clocks = <&clks IMX6SX_CLK_IPG>;
1285                                 clock-names = "adc";
1286                                 fsl,adck-max-frequency = <30000000>, <40000000>,
1287                                                          <20000000>;
1288                                 status = "disabled";
1289                         };
1290
1291                         wdog3: wdog@2288000 {
1292                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
1293                                 reg = <0x02288000 0x4000>;
1294                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1295                                 clocks = <&clks IMX6SX_CLK_IPG>;
1296                                 status = "disabled";
1297                         };
1298
1299                         ecspi5: spi@228c000 {
1300                                 #address-cells = <1>;
1301                                 #size-cells = <0>;
1302                                 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
1303                                 reg = <0x0228c000 0x4000>;
1304                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1305                                 clocks = <&clks IMX6SX_CLK_ECSPI5>,
1306                                          <&clks IMX6SX_CLK_ECSPI5>;
1307                                 clock-names = "ipg", "per";
1308                                 status = "disabled";
1309                         };
1310
1311                         uart6: serial@22a0000 {
1312                                 compatible = "fsl,imx6sx-uart",
1313                                              "fsl,imx6q-uart", "fsl,imx21-uart";
1314                                 reg = <0x022a0000 0x4000>;
1315                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1316                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1317                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1318                                 clock-names = "ipg", "per";
1319                                 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1320                                 dma-names = "rx", "tx";
1321                                 status = "disabled";
1322                         };
1323
1324                         pwm5: pwm@22a4000 {
1325                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1326                                 reg = <0x022a4000 0x4000>;
1327                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1328                                 clocks = <&clks IMX6SX_CLK_PWM5>,
1329                                          <&clks IMX6SX_CLK_PWM5>;
1330                                 clock-names = "ipg", "per";
1331                                 #pwm-cells = <2>;
1332                         };
1333
1334                         pwm6: pwm@22a8000 {
1335                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1336                                 reg = <0x022a8000 0x4000>;
1337                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1338                                 clocks = <&clks IMX6SX_CLK_PWM6>,
1339                                          <&clks IMX6SX_CLK_PWM6>;
1340                                 clock-names = "ipg", "per";
1341                                 #pwm-cells = <2>;
1342                         };
1343
1344                         pwm7: pwm@22ac000 {
1345                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1346                                 reg = <0x022ac000 0x4000>;
1347                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1348                                 clocks = <&clks IMX6SX_CLK_PWM7>,
1349                                          <&clks IMX6SX_CLK_PWM7>;
1350                                 clock-names = "ipg", "per";
1351                                 #pwm-cells = <2>;
1352                         };
1353
1354                         pwm8: pwm@22b0000 {
1355                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1356                                 reg = <0x0022b0000 0x4000>;
1357                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1358                                 clocks = <&clks IMX6SX_CLK_PWM8>,
1359                                          <&clks IMX6SX_CLK_PWM8>;
1360                                 clock-names = "ipg", "per";
1361                                 #pwm-cells = <2>;
1362                         };
1363                 };
1364
1365                 pcie: pcie@8ffc000 {
1366                         compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
1367                         reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
1368                         reg-names = "dbi", "config";
1369                         #address-cells = <3>;
1370                         #size-cells = <2>;
1371                         device_type = "pci";
1372                         bus-range = <0x00 0xff>;
1373                         ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
1374                                   0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
1375                         num-lanes = <1>;
1376                         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
1377                         interrupt-names = "msi";
1378                         #interrupt-cells = <1>;
1379                         interrupt-map-mask = <0 0 0 0x7>;
1380                         interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1381                                         <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
1382                                         <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
1383                                         <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
1384                         clocks = <&clks IMX6SX_CLK_PCIE_AXI>,
1385                                  <&clks IMX6SX_CLK_LVDS1_OUT>,
1386                                  <&clks IMX6SX_CLK_PCIE_REF_125M>,
1387                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1388                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi";
1389                         power-domains = <&pd_disp>, <&pd_pci>;
1390                         power-domain-names = "pcie", "pcie_phy";
1391                         status = "disabled";
1392                 };
1393         };
1394 };