arch/arm/boot/dts/imx6sl.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  *
   8  */
   9
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11 #include "skeleton.dtsi"
  12 #include "imx6sl-pinfunc.h"
  13 #include <dt-bindings/clock/imx6sl-clock.h>
  14
  15 / {
  16         aliases {
  17                 ethernet0 = &fec;
  18                 gpio0 = &gpio1;
  19                 gpio1 = &gpio2;
  20                 gpio2 = &gpio3;
  21                 gpio3 = &gpio4;
  22                 gpio4 = &gpio5;
  23                 serial0 = &uart1;
  24                 serial1 = &uart2;
  25                 serial2 = &uart3;
  26                 serial3 = &uart4;
  27                 serial4 = &uart5;
  28                 spi0 = &ecspi1;
  29                 spi1 = &ecspi2;
  30                 spi2 = &ecspi3;
  31                 spi3 = &ecspi4;
  32                 usbphy0 = &usbphy1;
  33                 usbphy1 = &usbphy2;
  34         };
  35
  36         cpus {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39
  40                 cpu@0 {
  41                         compatible = "arm,cortex-a9";
  42                         device_type = "cpu";
  43                         reg = <0x0>;
  44                         next-level-cache = <&L2>;
  45                         operating-points = <
  46                                 /* kHz    uV */
  47                                 996000  1275000
  48                                 792000  1175000
  49                                 396000  975000
  50                         >;
  51                         fsl,soc-operating-points = <
  52                                 /* ARM kHz      SOC-PU uV */
  53                                 996000          1225000
  54                                 792000          1175000
  55                                 396000          1175000
  56                         >;
  57                         clock-latency = <61036>; /* two CLK32 periods */
  58                         clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
  59                                         <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
  60                                         <&clks IMX6SL_CLK_PLL1_SYS>;
  61                         clock-names = "arm", "pll2_pfd2_396m", "step",
  62                                       "pll1_sw", "pll1_sys";
  63                         arm-supply = <&reg_arm>;
  64                         pu-supply = <&reg_pu>;
  65                         soc-supply = <&reg_soc>;
  66                 };
  67         };
  68
  69         intc: interrupt-controller@00a01000 {
  70                 compatible = "arm,cortex-a9-gic";
  71                 #interrupt-cells = <3>;
  72                 interrupt-controller;
  73                 reg = <0x00a01000 0x1000>,
  74                       <0x00a00100 0x100>;
  75         };
  76
  77         clocks {
  78                 #address-cells = <1>;
  79                 #size-cells = <0>;
  80
  81                 ckil {
  82                         compatible = "fixed-clock";
  83                         #clock-cells = <0>;
  84                         clock-frequency = <32768>;
  85                 };
  86
  87                 osc {
  88                         compatible = "fixed-clock";
  89                         #clock-cells = <0>;
  90                         clock-frequency = <24000000>;
  91                 };
  92         };
  93
  94         soc {
  95                 #address-cells = <1>;
  96                 #size-cells = <1>;
  97                 compatible = "simple-bus";
  98                 interrupt-parent = <&intc>;
  99                 ranges;
 100
 101                 ocram: sram@00900000 {
 102                         compatible = "mmio-sram";
 103                         reg = <0x00900000 0x20000>;
 104                         clocks = <&clks IMX6SL_CLK_OCRAM>;
 105                 };
 106
 107                 L2: l2-cache@00a02000 {
 108                         compatible = "arm,pl310-cache";
 109                         reg = <0x00a02000 0x1000>;
 110                         interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 111                         cache-unified;
 112                         cache-level = <2>;
 113                         arm,tag-latency = <4 2 3>;
 114                         arm,data-latency = <4 2 3>;
 115                 };
 116
 117                 pmu {
 118                         compatible = "arm,cortex-a9-pmu";
 119                         interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 120                 };
 121
 122                 aips1: aips-bus@02000000 {
 123                         compatible = "fsl,aips-bus", "simple-bus";
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126                         reg = <0x02000000 0x100000>;
 127                         ranges;
 128
 129                         spba: spba-bus@02000000 {
 130                                 compatible = "fsl,spba-bus", "simple-bus";
 131                                 #address-cells = <1>;
 132                                 #size-cells = <1>;
 133                                 reg = <0x02000000 0x40000>;
 134                                 ranges;
 135
 136                                 spdif: spdif@02004000 {
 137                                         reg = <0x02004000 0x4000>;
 138                                         interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 139                                 };
 140
 141                                 ecspi1: ecspi@02008000 {
 142                                         #address-cells = <1>;
 143                                         #size-cells = <0>;
 144                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 145                                         reg = <0x02008000 0x4000>;
 146                                         interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 147                                         clocks = <&clks IMX6SL_CLK_ECSPI1>,
 148                                                  <&clks IMX6SL_CLK_ECSPI1>;
 149                                         clock-names = "ipg", "per";
 150                                         status = "disabled";
 151                                 };
 152
 153                                 ecspi2: ecspi@0200c000 {
 154                                         #address-cells = <1>;
 155                                         #size-cells = <0>;
 156                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 157                                         reg = <0x0200c000 0x4000>;
 158                                         interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 159                                         clocks = <&clks IMX6SL_CLK_ECSPI2>,
 160                                                  <&clks IMX6SL_CLK_ECSPI2>;
 161                                         clock-names = "ipg", "per";
 162                                         status = "disabled";
 163                                 };
 164
 165                                 ecspi3: ecspi@02010000 {
 166                                         #address-cells = <1>;
 167                                         #size-cells = <0>;
 168                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 169                                         reg = <0x02010000 0x4000>;
 170                                         interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 171                                         clocks = <&clks IMX6SL_CLK_ECSPI3>,
 172                                                  <&clks IMX6SL_CLK_ECSPI3>;
 173                                         clock-names = "ipg", "per";
 174                                         status = "disabled";
 175                                 };
 176
 177                                 ecspi4: ecspi@02014000 {
 178                                         #address-cells = <1>;
 179                                         #size-cells = <0>;
 180                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 181                                         reg = <0x02014000 0x4000>;
 182                                         interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 183                                         clocks = <&clks IMX6SL_CLK_ECSPI4>,
 184                                                  <&clks IMX6SL_CLK_ECSPI4>;
 185                                         clock-names = "ipg", "per";
 186                                         status = "disabled";
 187                                 };
 188
 189                                 uart5: serial@02018000 {
 190                                         compatible = "fsl,imx6sl-uart",
 191                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 192                                         reg = <0x02018000 0x4000>;
 193                                         interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 194                                         clocks = <&clks IMX6SL_CLK_UART>,
 195                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 196                                         clock-names = "ipg", "per";
 197                                         dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
 198                                         dma-names = "rx", "tx";
 199                                         status = "disabled";
 200                                 };
 201
 202                                 uart1: serial@02020000 {
 203                                         compatible = "fsl,imx6sl-uart",
 204                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 205                                         reg = <0x02020000 0x4000>;
 206                                         interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 207                                         clocks = <&clks IMX6SL_CLK_UART>,
 208                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 209                                         clock-names = "ipg", "per";
 210                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 211                                         dma-names = "rx", "tx";
 212                                         status = "disabled";
 213                                 };
 214
 215                                 uart2: serial@02024000 {
 216                                         compatible = "fsl,imx6sl-uart",
 217                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 218                                         reg = <0x02024000 0x4000>;
 219                                         interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 220                                         clocks = <&clks IMX6SL_CLK_UART>,
 221                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 222                                         clock-names = "ipg", "per";
 223                                         dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
 224                                         dma-names = "rx", "tx";
 225                                         status = "disabled";
 226                                 };
 227
 228                                 ssi1: ssi@02028000 {
 229                                         compatible = "fsl,imx6sl-ssi",
 230                                                         "fsl,imx51-ssi",
 231                                                         "fsl,imx21-ssi";
 232                                         reg = <0x02028000 0x4000>;
 233                                         interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 234                                         clocks = <&clks IMX6SL_CLK_SSI1>;
 235                                         dmas = <&sdma 37 1 0>,
 236                                                <&sdma 38 1 0>;
 237                                         dma-names = "rx", "tx";
 238                                         fsl,fifo-depth = <15>;
 239                                         status = "disabled";
 240                                 };
 241
 242                                 ssi2: ssi@0202c000 {
 243                                         compatible = "fsl,imx6sl-ssi",
 244                                                         "fsl,imx51-ssi",
 245                                                         "fsl,imx21-ssi";
 246                                         reg = <0x0202c000 0x4000>;
 247                                         interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 248                                         clocks = <&clks IMX6SL_CLK_SSI2>;
 249                                         dmas = <&sdma 41 1 0>,
 250                                                <&sdma 42 1 0>;
 251                                         dma-names = "rx", "tx";
 252                                         fsl,fifo-depth = <15>;
 253                                         status = "disabled";
 254                                 };
 255
 256                                 ssi3: ssi@02030000 {
 257                                         compatible = "fsl,imx6sl-ssi",
 258                                                         "fsl,imx51-ssi",
 259                                                         "fsl,imx21-ssi";
 260                                         reg = <0x02030000 0x4000>;
 261                                         interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 262                                         clocks = <&clks IMX6SL_CLK_SSI3>;
 263                                         dmas = <&sdma 45 1 0>,
 264                                                <&sdma 46 1 0>;
 265                                         dma-names = "rx", "tx";
 266                                         fsl,fifo-depth = <15>;
 267                                         status = "disabled";
 268                                 };
 269
 270                                 uart3: serial@02034000 {
 271                                         compatible = "fsl,imx6sl-uart",
 272                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 273                                         reg = <0x02034000 0x4000>;
 274                                         interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 275                                         clocks = <&clks IMX6SL_CLK_UART>,
 276                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 277                                         clock-names = "ipg", "per";
 278                                         dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
 279                                         dma-names = "rx", "tx";
 280                                         status = "disabled";
 281                                 };
 282
 283                                 uart4: serial@02038000 {
 284                                         compatible = "fsl,imx6sl-uart",
 285                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 286                                         reg = <0x02038000 0x4000>;
 287                                         interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 288                                         clocks = <&clks IMX6SL_CLK_UART>,
 289                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 290                                         clock-names = "ipg", "per";
 291                                         dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
 292                                         dma-names = "rx", "tx";
 293                                         status = "disabled";
 294                                 };
 295                         };
 296
 297                         pwm1: pwm@02080000 {
 298                                 #pwm-cells = <2>;
 299                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 300                                 reg = <0x02080000 0x4000>;
 301                                 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 302                                 clocks = <&clks IMX6SL_CLK_PWM1>,
 303                                          <&clks IMX6SL_CLK_PWM1>;
 304                                 clock-names = "ipg", "per";
 305                         };
 306
 307                         pwm2: pwm@02084000 {
 308                                 #pwm-cells = <2>;
 309                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 310                                 reg = <0x02084000 0x4000>;
 311                                 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 312                                 clocks = <&clks IMX6SL_CLK_PWM2>,
 313                                          <&clks IMX6SL_CLK_PWM2>;
 314                                 clock-names = "ipg", "per";
 315                         };
 316
 317                         pwm3: pwm@02088000 {
 318                                 #pwm-cells = <2>;
 319                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 320                                 reg = <0x02088000 0x4000>;
 321                                 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 322                                 clocks = <&clks IMX6SL_CLK_PWM3>,
 323                                          <&clks IMX6SL_CLK_PWM3>;
 324                                 clock-names = "ipg", "per";
 325                         };
 326
 327                         pwm4: pwm@0208c000 {
 328                                 #pwm-cells = <2>;
 329                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 330                                 reg = <0x0208c000 0x4000>;
 331                                 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 332                                 clocks = <&clks IMX6SL_CLK_PWM4>,
 333                                          <&clks IMX6SL_CLK_PWM4>;
 334                                 clock-names = "ipg", "per";
 335                         };
 336
 337                         gpt: gpt@02098000 {
 338                                 compatible = "fsl,imx6sl-gpt";
 339                                 reg = <0x02098000 0x4000>;
 340                                 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 341                                 clocks = <&clks IMX6SL_CLK_GPT>,
 342                                          <&clks IMX6SL_CLK_GPT_SERIAL>;
 343                                 clock-names = "ipg", "per";
 344                         };
 345
 346                         gpio1: gpio@0209c000 {
 347                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 348                                 reg = <0x0209c000 0x4000>;
 349                                 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
 350                                              <0 67 IRQ_TYPE_LEVEL_HIGH>;
 351                                 gpio-controller;
 352                                 #gpio-cells = <2>;
 353                                 interrupt-controller;
 354                                 #interrupt-cells = <2>;
 355                         };
 356
 357                         gpio2: gpio@020a0000 {
 358                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 359                                 reg = <0x020a0000 0x4000>;
 360                                 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
 361                                              <0 69 IRQ_TYPE_LEVEL_HIGH>;
 362                                 gpio-controller;
 363                                 #gpio-cells = <2>;
 364                                 interrupt-controller;
 365                                 #interrupt-cells = <2>;
 366                         };
 367
 368                         gpio3: gpio@020a4000 {
 369                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 370                                 reg = <0x020a4000 0x4000>;
 371                                 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
 372                                              <0 71 IRQ_TYPE_LEVEL_HIGH>;
 373                                 gpio-controller;
 374                                 #gpio-cells = <2>;
 375                                 interrupt-controller;
 376                                 #interrupt-cells = <2>;
 377                         };
 378
 379                         gpio4: gpio@020a8000 {
 380                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 381                                 reg = <0x020a8000 0x4000>;
 382                                 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
 383                                              <0 73 IRQ_TYPE_LEVEL_HIGH>;
 384                                 gpio-controller;
 385                                 #gpio-cells = <2>;
 386                                 interrupt-controller;
 387                                 #interrupt-cells = <2>;
 388                         };
 389
 390                         gpio5: gpio@020ac000 {
 391                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 392                                 reg = <0x020ac000 0x4000>;
 393                                 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
 394                                              <0 75 IRQ_TYPE_LEVEL_HIGH>;
 395                                 gpio-controller;
 396                                 #gpio-cells = <2>;
 397                                 interrupt-controller;
 398                                 #interrupt-cells = <2>;
 399                         };
 400
 401                         kpp: kpp@020b8000 {
 402                                 compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
 403                                 reg = <0x020b8000 0x4000>;
 404                                 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 405                                 clocks = <&clks IMX6SL_CLK_DUMMY>;
 406                         };
 407
 408                         wdog1: wdog@020bc000 {
 409                                 compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 410                                 reg = <0x020bc000 0x4000>;
 411                                 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 412                                 clocks = <&clks IMX6SL_CLK_DUMMY>;
 413                         };
 414
 415                         wdog2: wdog@020c0000 {
 416                                 compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 417                                 reg = <0x020c0000 0x4000>;
 418                                 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 419                                 clocks = <&clks IMX6SL_CLK_DUMMY>;
 420                                 status = "disabled";
 421                         };
 422
 423                         clks: ccm@020c4000 {
 424                                 compatible = "fsl,imx6sl-ccm";
 425                                 reg = <0x020c4000 0x4000>;
 426                                 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
 427                                              <0 88 IRQ_TYPE_LEVEL_HIGH>;
 428                                 #clock-cells = <1>;
 429                         };
 430
 431                         anatop: anatop@020c8000 {
 432                                 compatible = "fsl,imx6sl-anatop",
 433                                              "fsl,imx6q-anatop",
 434                                              "syscon", "simple-bus";
 435                                 reg = <0x020c8000 0x1000>;
 436                                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
 437                                              <0 54 IRQ_TYPE_LEVEL_HIGH>,
 438                                              <0 127 IRQ_TYPE_LEVEL_HIGH>;
 439
 440                                 regulator-1p1@110 {
 441                                         compatible = "fsl,anatop-regulator";
 442                                         regulator-name = "vdd1p1";
 443                                         regulator-min-microvolt = <800000>;
 444                                         regulator-max-microvolt = <1375000>;
 445                                         regulator-always-on;
 446                                         anatop-reg-offset = <0x110>;
 447                                         anatop-vol-bit-shift = <8>;
 448                                         anatop-vol-bit-width = <5>;
 449                                         anatop-min-bit-val = <4>;
 450                                         anatop-min-voltage = <800000>;
 451                                         anatop-max-voltage = <1375000>;
 452                                 };
 453
 454                                 regulator-3p0@120 {
 455                                         compatible = "fsl,anatop-regulator";
 456                                         regulator-name = "vdd3p0";
 457                                         regulator-min-microvolt = <2800000>;
 458                                         regulator-max-microvolt = <3150000>;
 459                                         regulator-always-on;
 460                                         anatop-reg-offset = <0x120>;
 461                                         anatop-vol-bit-shift = <8>;
 462                                         anatop-vol-bit-width = <5>;
 463                                         anatop-min-bit-val = <0>;
 464                                         anatop-min-voltage = <2625000>;
 465                                         anatop-max-voltage = <3400000>;
 466                                 };
 467
 468                                 regulator-2p5@130 {
 469                                         compatible = "fsl,anatop-regulator";
 470                                         regulator-name = "vdd2p5";
 471                                         regulator-min-microvolt = <2100000>;
 472                                         regulator-max-microvolt = <2850000>;
 473                                         regulator-always-on;
 474                                         anatop-reg-offset = <0x130>;
 475                                         anatop-vol-bit-shift = <8>;
 476                                         anatop-vol-bit-width = <5>;
 477                                         anatop-min-bit-val = <0>;
 478                                         anatop-min-voltage = <2100000>;
 479                                         anatop-max-voltage = <2850000>;
 480                                 };
 481
 482                                 reg_arm: regulator-vddcore@140 {
 483                                         compatible = "fsl,anatop-regulator";
 484                                         regulator-name = "vddarm";
 485                                         regulator-min-microvolt = <725000>;
 486                                         regulator-max-microvolt = <1450000>;
 487                                         regulator-always-on;
 488                                         anatop-reg-offset = <0x140>;
 489                                         anatop-vol-bit-shift = <0>;
 490                                         anatop-vol-bit-width = <5>;
 491                                         anatop-delay-reg-offset = <0x170>;
 492                                         anatop-delay-bit-shift = <24>;
 493                                         anatop-delay-bit-width = <2>;
 494                                         anatop-min-bit-val = <1>;
 495                                         anatop-min-voltage = <725000>;
 496                                         anatop-max-voltage = <1450000>;
 497                                 };
 498
 499                                 reg_pu: regulator-vddpu@140 {
 500                                         compatible = "fsl,anatop-regulator";
 501                                         regulator-name = "vddpu";
 502                                         regulator-min-microvolt = <725000>;
 503                                         regulator-max-microvolt = <1450000>;
 504                                         regulator-always-on;
 505                                         anatop-reg-offset = <0x140>;
 506                                         anatop-vol-bit-shift = <9>;
 507                                         anatop-vol-bit-width = <5>;
 508                                         anatop-delay-reg-offset = <0x170>;
 509                                         anatop-delay-bit-shift = <26>;
 510                                         anatop-delay-bit-width = <2>;
 511                                         anatop-min-bit-val = <1>;
 512                                         anatop-min-voltage = <725000>;
 513                                         anatop-max-voltage = <1450000>;
 514                                 };
 515
 516                                 reg_soc: regulator-vddsoc@140 {
 517                                         compatible = "fsl,anatop-regulator";
 518                                         regulator-name = "vddsoc";
 519                                         regulator-min-microvolt = <725000>;
 520                                         regulator-max-microvolt = <1450000>;
 521                                         regulator-always-on;
 522                                         anatop-reg-offset = <0x140>;
 523                                         anatop-vol-bit-shift = <18>;
 524                                         anatop-vol-bit-width = <5>;
 525                                         anatop-delay-reg-offset = <0x170>;
 526                                         anatop-delay-bit-shift = <28>;
 527                                         anatop-delay-bit-width = <2>;
 528                                         anatop-min-bit-val = <1>;
 529                                         anatop-min-voltage = <725000>;
 530                                         anatop-max-voltage = <1450000>;
 531                                 };
 532                         };
 533
 534                         usbphy1: usbphy@020c9000 {
 535                                 compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
 536                                 reg = <0x020c9000 0x1000>;
 537                                 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 538                                 clocks = <&clks IMX6SL_CLK_USBPHY1>;
 539                                 fsl,anatop = <&anatop>;
 540                         };
 541
 542                         usbphy2: usbphy@020ca000 {
 543                                 compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
 544                                 reg = <0x020ca000 0x1000>;
 545                                 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 546                                 clocks = <&clks IMX6SL_CLK_USBPHY2>;
 547                                 fsl,anatop = <&anatop>;
 548                         };
 549
 550                         snvs@020cc000 {
 551                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 552                                 #address-cells = <1>;
 553                                 #size-cells = <1>;
 554                                 ranges = <0 0x020cc000 0x4000>;
 555
 556                                 snvs-rtc-lp@34 {
 557                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 558                                         reg = <0x34 0x58>;
 559                                         interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 560                                                      <0 20 IRQ_TYPE_LEVEL_HIGH>;
 561                                 };
 562                         };
 563
 564                         epit1: epit@020d0000 {
 565                                 reg = <0x020d0000 0x4000>;
 566                                 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 567                         };
 568
 569                         epit2: epit@020d4000 {
 570                                 reg = <0x020d4000 0x4000>;
 571                                 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 572                         };
 573
 574                         src: src@020d8000 {
 575                                 compatible = "fsl,imx6sl-src", "fsl,imx51-src";
 576                                 reg = <0x020d8000 0x4000>;
 577                                 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
 578                                              <0 96 IRQ_TYPE_LEVEL_HIGH>;
 579                                 #reset-cells = <1>;
 580                         };
 581
 582                         gpc: gpc@020dc000 {
 583                                 compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
 584                                 reg = <0x020dc000 0x4000>;
 585                                 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 586                         };
 587
 588                         gpr: iomuxc-gpr@020e0000 {
 589                                 compatible = "fsl,imx6sl-iomuxc-gpr",
 590                                              "fsl,imx6q-iomuxc-gpr", "syscon";
 591                                 reg = <0x020e0000 0x38>;
 592                         };
 593
 594                         iomuxc: iomuxc@020e0000 {
 595                                 compatible = "fsl,imx6sl-iomuxc";
 596                                 reg = <0x020e0000 0x4000>;
 597                         };
 598
 599                         csi: csi@020e4000 {
 600                                 reg = <0x020e4000 0x4000>;
 601                                 interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 602                         };
 603
 604                         spdc: spdc@020e8000 {
 605                                 reg = <0x020e8000 0x4000>;
 606                                 interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 607                         };
 608
 609                         sdma: sdma@020ec000 {
 610                                 compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
 611                                 reg = <0x020ec000 0x4000>;
 612                                 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 613                                 clocks = <&clks IMX6SL_CLK_SDMA>,
 614                                          <&clks IMX6SL_CLK_SDMA>;
 615                                 clock-names = "ipg", "ahb";
 616                                 #dma-cells = <3>;
 617                                 /* imx6sl reuses imx6q sdma firmware */
 618                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 619                         };
 620
 621                         pxp: pxp@020f0000 {
 622                                 reg = <0x020f0000 0x4000>;
 623                                 interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 624                         };
 625
 626                         epdc: epdc@020f4000 {
 627                                 reg = <0x020f4000 0x4000>;
 628                                 interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 629                         };
 630
 631                         lcdif: lcdif@020f8000 {
 632                                 reg = <0x020f8000 0x4000>;
 633                                 interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
 634                         };
 635
 636                         dcp: dcp@020fc000 {
 637                                 reg = <0x020fc000 0x4000>;
 638                                 interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
 639                         };
 640                 };
 641
 642                 aips2: aips-bus@02100000 {
 643                         compatible = "fsl,aips-bus", "simple-bus";
 644                         #address-cells = <1>;
 645                         #size-cells = <1>;
 646                         reg = <0x02100000 0x100000>;
 647                         ranges;
 648
 649                         usbotg1: usb@02184000 {
 650                                 compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 651                                 reg = <0x02184000 0x200>;
 652                                 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 653                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 654                                 fsl,usbphy = <&usbphy1>;
 655                                 fsl,usbmisc = <&usbmisc 0>;
 656                                 status = "disabled";
 657                         };
 658
 659                         usbotg2: usb@02184200 {
 660                                 compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 661                                 reg = <0x02184200 0x200>;
 662                                 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 663                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 664                                 fsl,usbphy = <&usbphy2>;
 665                                 fsl,usbmisc = <&usbmisc 1>;
 666                                 status = "disabled";
 667                         };
 668
 669                         usbh: usb@02184400 {
 670                                 compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 671                                 reg = <0x02184400 0x200>;
 672                                 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 673                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 674                                 fsl,usbmisc = <&usbmisc 2>;
 675                                 status = "disabled";
 676                         };
 677
 678                         usbmisc: usbmisc@02184800 {
 679                                 #index-cells = <1>;
 680                                 compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
 681                                 reg = <0x02184800 0x200>;
 682                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 683                         };
 684
 685                         fec: ethernet@02188000 {
 686                                 compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
 687                                 reg = <0x02188000 0x4000>;
 688                                 interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
 689                                 clocks = <&clks IMX6SL_CLK_ENET_REF>,
 690                                          <&clks IMX6SL_CLK_ENET_REF>;
 691                                 clock-names = "ipg", "ahb";
 692                                 status = "disabled";
 693                         };
 694
 695                         usdhc1: usdhc@02190000 {
 696                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 697                                 reg = <0x02190000 0x4000>;
 698                                 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 699                                 clocks = <&clks IMX6SL_CLK_USDHC1>,
 700                                          <&clks IMX6SL_CLK_USDHC1>,
 701                                          <&clks IMX6SL_CLK_USDHC1>;
 702                                 clock-names = "ipg", "ahb", "per";
 703                                 bus-width = <4>;
 704                                 status = "disabled";
 705                         };
 706
 707                         usdhc2: usdhc@02194000 {
 708                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 709                                 reg = <0x02194000 0x4000>;
 710                                 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 711                                 clocks = <&clks IMX6SL_CLK_USDHC2>,
 712                                          <&clks IMX6SL_CLK_USDHC2>,
 713                                          <&clks IMX6SL_CLK_USDHC2>;
 714                                 clock-names = "ipg", "ahb", "per";
 715                                 bus-width = <4>;
 716                                 status = "disabled";
 717                         };
 718
 719                         usdhc3: usdhc@02198000 {
 720                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 721                                 reg = <0x02198000 0x4000>;
 722                                 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 723                                 clocks = <&clks IMX6SL_CLK_USDHC3>,
 724                                          <&clks IMX6SL_CLK_USDHC3>,
 725                                          <&clks IMX6SL_CLK_USDHC3>;
 726                                 clock-names = "ipg", "ahb", "per";
 727                                 bus-width = <4>;
 728                                 status = "disabled";
 729                         };
 730
 731                         usdhc4: usdhc@0219c000 {
 732                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 733                                 reg = <0x0219c000 0x4000>;
 734                                 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 735                                 clocks = <&clks IMX6SL_CLK_USDHC4>,
 736                                          <&clks IMX6SL_CLK_USDHC4>,
 737                                          <&clks IMX6SL_CLK_USDHC4>;
 738                                 clock-names = "ipg", "ahb", "per";
 739                                 bus-width = <4>;
 740                                 status = "disabled";
 741                         };
 742
 743                         i2c1: i2c@021a0000 {
 744                                 #address-cells = <1>;
 745                                 #size-cells = <0>;
 746                                 compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 747                                 reg = <0x021a0000 0x4000>;
 748                                 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
 749                                 clocks = <&clks IMX6SL_CLK_I2C1>;
 750                                 status = "disabled";
 751                         };
 752
 753                         i2c2: i2c@021a4000 {
 754                                 #address-cells = <1>;
 755                                 #size-cells = <0>;
 756                                 compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 757                                 reg = <0x021a4000 0x4000>;
 758                                 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
 759                                 clocks = <&clks IMX6SL_CLK_I2C2>;
 760                                 status = "disabled";
 761                         };
 762
 763                         i2c3: i2c@021a8000 {
 764                                 #address-cells = <1>;
 765                                 #size-cells = <0>;
 766                                 compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 767                                 reg = <0x021a8000 0x4000>;
 768                                 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
 769                                 clocks = <&clks IMX6SL_CLK_I2C3>;
 770                                 status = "disabled";
 771                         };
 772
 773                         mmdc: mmdc@021b0000 {
 774                                 compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
 775                                 reg = <0x021b0000 0x4000>;
 776                         };
 777
 778                         rngb: rngb@021b4000 {
 779                                 reg = <0x021b4000 0x4000>;
 780                                 interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 781                         };
 782
 783                         weim: weim@021b8000 {
 784                                 reg = <0x021b8000 0x4000>;
 785                                 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 786                         };
 787
 788                         ocotp: ocotp@021bc000 {
 789                                 compatible = "fsl,imx6sl-ocotp";
 790                                 reg = <0x021bc000 0x4000>;
 791                         };
 792
 793                         audmux: audmux@021d8000 {
 794                                 compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
 795                                 reg = <0x021d8000 0x4000>;
 796                                 status = "disabled";
 797                         };
 798                 };
 799         };
 800 };