arch/arm/boot/dts/imx6qdl.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include "skeleton.dtsi"
  14
  15 / {
  16         aliases {
  17                 serial0 = &uart1;
  18                 serial1 = &uart2;
  19                 serial2 = &uart3;
  20                 serial3 = &uart4;
  21                 serial4 = &uart5;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28                 gpio6 = &gpio7;
  29         };
  30
  31         intc: interrupt-controller@00a01000 {
  32                 compatible = "arm,cortex-a9-gic";
  33                 #interrupt-cells = <3>;
  34                 #address-cells = <1>;
  35                 #size-cells = <1>;
  36                 interrupt-controller;
  37                 reg = <0x00a01000 0x1000>,
  38                       <0x00a00100 0x100>;
  39         };
  40
  41         clocks {
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44
  45                 ckil {
  46                         compatible = "fsl,imx-ckil", "fixed-clock";
  47                         clock-frequency = <32768>;
  48                 };
  49
  50                 ckih1 {
  51                         compatible = "fsl,imx-ckih1", "fixed-clock";
  52                         clock-frequency = <0>;
  53                 };
  54
  55                 osc {
  56                         compatible = "fsl,imx-osc", "fixed-clock";
  57                         clock-frequency = <24000000>;
  58                 };
  59         };
  60
  61         soc {
  62                 #address-cells = <1>;
  63                 #size-cells = <1>;
  64                 compatible = "simple-bus";
  65                 interrupt-parent = <&intc>;
  66                 ranges;
  67
  68                 dma_apbh: dma-apbh@00110000 {
  69                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
  70                         reg = <0x00110000 0x2000>;
  71                         interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>;
  72                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
  73                         #dma-cells = <1>;
  74                         dma-channels = <4>;
  75                         clocks = <&clks 106>;
  76                 };
  77
  78                 gpmi: gpmi-nand@00112000 {
  79                         compatible = "fsl,imx6q-gpmi-nand";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82                         reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
  83                         reg-names = "gpmi-nand", "bch";
  84                         interrupts = <0 13 0x04>, <0 15 0x04>;
  85                         interrupt-names = "gpmi-dma", "bch";
  86                         clocks = <&clks 152>, <&clks 153>, <&clks 151>,
  87                                  <&clks 150>, <&clks 149>;
  88                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
  89                                       "gpmi_bch_apb", "per1_bch";
  90                         dmas = <&dma_apbh 0>;
  91                         dma-names = "rx-tx";
  92                         fsl,gpmi-dma-channel = <0>;
  93                         status = "disabled";
  94                 };
  95
  96                 timer@00a00600 {
  97                         compatible = "arm,cortex-a9-twd-timer";
  98                         reg = <0x00a00600 0x20>;
  99                         interrupts = <1 13 0xf01>;
 100                         clocks = <&clks 15>;
 101                 };
 102
 103                 L2: l2-cache@00a02000 {
 104                         compatible = "arm,pl310-cache";
 105                         reg = <0x00a02000 0x1000>;
 106                         interrupts = <0 92 0x04>;
 107                         cache-unified;
 108                         cache-level = <2>;
 109                         arm,tag-latency = <4 2 3>;
 110                         arm,data-latency = <4 2 3>;
 111                 };
 112
 113                 pmu {
 114                         compatible = "arm,cortex-a9-pmu";
 115                         interrupts = <0 94 0x04>;
 116                 };
 117
 118                 aips-bus@02000000 { /* AIPS1 */
 119                         compatible = "fsl,aips-bus", "simple-bus";
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122                         reg = <0x02000000 0x100000>;
 123                         ranges;
 124
 125                         spba-bus@02000000 {
 126                                 compatible = "fsl,spba-bus", "simple-bus";
 127                                 #address-cells = <1>;
 128                                 #size-cells = <1>;
 129                                 reg = <0x02000000 0x40000>;
 130                                 ranges;
 131
 132                                 spdif: spdif@02004000 {
 133                                         reg = <0x02004000 0x4000>;
 134                                         interrupts = <0 52 0x04>;
 135                                 };
 136
 137                                 ecspi1: ecspi@02008000 {
 138                                         #address-cells = <1>;
 139                                         #size-cells = <0>;
 140                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 141                                         reg = <0x02008000 0x4000>;
 142                                         interrupts = <0 31 0x04>;
 143                                         clocks = <&clks 112>, <&clks 112>;
 144                                         clock-names = "ipg", "per";
 145                                         status = "disabled";
 146                                 };
 147
 148                                 ecspi2: ecspi@0200c000 {
 149                                         #address-cells = <1>;
 150                                         #size-cells = <0>;
 151                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 152                                         reg = <0x0200c000 0x4000>;
 153                                         interrupts = <0 32 0x04>;
 154                                         clocks = <&clks 113>, <&clks 113>;
 155                                         clock-names = "ipg", "per";
 156                                         status = "disabled";
 157                                 };
 158
 159                                 ecspi3: ecspi@02010000 {
 160                                         #address-cells = <1>;
 161                                         #size-cells = <0>;
 162                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 163                                         reg = <0x02010000 0x4000>;
 164                                         interrupts = <0 33 0x04>;
 165                                         clocks = <&clks 114>, <&clks 114>;
 166                                         clock-names = "ipg", "per";
 167                                         status = "disabled";
 168                                 };
 169
 170                                 ecspi4: ecspi@02014000 {
 171                                         #address-cells = <1>;
 172                                         #size-cells = <0>;
 173                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 174                                         reg = <0x02014000 0x4000>;
 175                                         interrupts = <0 34 0x04>;
 176                                         clocks = <&clks 115>, <&clks 115>;
 177                                         clock-names = "ipg", "per";
 178                                         status = "disabled";
 179                                 };
 180
 181                                 uart1: serial@02020000 {
 182                                         compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 183                                         reg = <0x02020000 0x4000>;
 184                                         interrupts = <0 26 0x04>;
 185                                         clocks = <&clks 160>, <&clks 161>;
 186                                         clock-names = "ipg", "per";
 187                                         status = "disabled";
 188                                 };
 189
 190                                 esai: esai@02024000 {
 191                                         reg = <0x02024000 0x4000>;
 192                                         interrupts = <0 51 0x04>;
 193                                 };
 194
 195                                 ssi1: ssi@02028000 {
 196                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 197                                         reg = <0x02028000 0x4000>;
 198                                         interrupts = <0 46 0x04>;
 199                                         clocks = <&clks 178>;
 200                                         fsl,fifo-depth = <15>;
 201                                         fsl,ssi-dma-events = <38 37>;
 202                                         status = "disabled";
 203                                 };
 204
 205                                 ssi2: ssi@0202c000 {
 206                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 207                                         reg = <0x0202c000 0x4000>;
 208                                         interrupts = <0 47 0x04>;
 209                                         clocks = <&clks 179>;
 210                                         fsl,fifo-depth = <15>;
 211                                         fsl,ssi-dma-events = <42 41>;
 212                                         status = "disabled";
 213                                 };
 214
 215                                 ssi3: ssi@02030000 {
 216                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 217                                         reg = <0x02030000 0x4000>;
 218                                         interrupts = <0 48 0x04>;
 219                                         clocks = <&clks 180>;
 220                                         fsl,fifo-depth = <15>;
 221                                         fsl,ssi-dma-events = <46 45>;
 222                                         status = "disabled";
 223                                 };
 224
 225                                 asrc: asrc@02034000 {
 226                                         reg = <0x02034000 0x4000>;
 227                                         interrupts = <0 50 0x04>;
 228                                 };
 229
 230                                 spba@0203c000 {
 231                                         reg = <0x0203c000 0x4000>;
 232                                 };
 233                         };
 234
 235                         vpu: vpu@02040000 {
 236                                 reg = <0x02040000 0x3c000>;
 237                                 interrupts = <0 3 0x04 0 12 0x04>;
 238                         };
 239
 240                         aipstz@0207c000 { /* AIPSTZ1 */
 241                                 reg = <0x0207c000 0x4000>;
 242                         };
 243
 244                         pwm1: pwm@02080000 {
 245                                 #pwm-cells = <2>;
 246                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 247                                 reg = <0x02080000 0x4000>;
 248                                 interrupts = <0 83 0x04>;
 249                                 clocks = <&clks 62>, <&clks 145>;
 250                                 clock-names = "ipg", "per";
 251                         };
 252
 253                         pwm2: pwm@02084000 {
 254                                 #pwm-cells = <2>;
 255                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 256                                 reg = <0x02084000 0x4000>;
 257                                 interrupts = <0 84 0x04>;
 258                                 clocks = <&clks 62>, <&clks 146>;
 259                                 clock-names = "ipg", "per";
 260                         };
 261
 262                         pwm3: pwm@02088000 {
 263                                 #pwm-cells = <2>;
 264                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 265                                 reg = <0x02088000 0x4000>;
 266                                 interrupts = <0 85 0x04>;
 267                                 clocks = <&clks 62>, <&clks 147>;
 268                                 clock-names = "ipg", "per";
 269                         };
 270
 271                         pwm4: pwm@0208c000 {
 272                                 #pwm-cells = <2>;
 273                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 274                                 reg = <0x0208c000 0x4000>;
 275                                 interrupts = <0 86 0x04>;
 276                                 clocks = <&clks 62>, <&clks 148>;
 277                                 clock-names = "ipg", "per";
 278                         };
 279
 280                         can1: flexcan@02090000 {
 281                                 reg = <0x02090000 0x4000>;
 282                                 interrupts = <0 110 0x04>;
 283                         };
 284
 285                         can2: flexcan@02094000 {
 286                                 reg = <0x02094000 0x4000>;
 287                                 interrupts = <0 111 0x04>;
 288                         };
 289
 290                         gpt: gpt@02098000 {
 291                                 compatible = "fsl,imx6q-gpt";
 292                                 reg = <0x02098000 0x4000>;
 293                                 interrupts = <0 55 0x04>;
 294                                 clocks = <&clks 119>, <&clks 120>;
 295                                 clock-names = "ipg", "per";
 296                         };
 297
 298                         gpio1: gpio@0209c000 {
 299                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 300                                 reg = <0x0209c000 0x4000>;
 301                                 interrupts = <0 66 0x04 0 67 0x04>;
 302                                 gpio-controller;
 303                                 #gpio-cells = <2>;
 304                                 interrupt-controller;
 305                                 #interrupt-cells = <2>;
 306                         };
 307
 308                         gpio2: gpio@020a0000 {
 309                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 310                                 reg = <0x020a0000 0x4000>;
 311                                 interrupts = <0 68 0x04 0 69 0x04>;
 312                                 gpio-controller;
 313                                 #gpio-cells = <2>;
 314                                 interrupt-controller;
 315                                 #interrupt-cells = <2>;
 316                         };
 317
 318                         gpio3: gpio@020a4000 {
 319                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 320                                 reg = <0x020a4000 0x4000>;
 321                                 interrupts = <0 70 0x04 0 71 0x04>;
 322                                 gpio-controller;
 323                                 #gpio-cells = <2>;
 324                                 interrupt-controller;
 325                                 #interrupt-cells = <2>;
 326                         };
 327
 328                         gpio4: gpio@020a8000 {
 329                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 330                                 reg = <0x020a8000 0x4000>;
 331                                 interrupts = <0 72 0x04 0 73 0x04>;
 332                                 gpio-controller;
 333                                 #gpio-cells = <2>;
 334                                 interrupt-controller;
 335                                 #interrupt-cells = <2>;
 336                         };
 337
 338                         gpio5: gpio@020ac000 {
 339                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 340                                 reg = <0x020ac000 0x4000>;
 341                                 interrupts = <0 74 0x04 0 75 0x04>;
 342                                 gpio-controller;
 343                                 #gpio-cells = <2>;
 344                                 interrupt-controller;
 345                                 #interrupt-cells = <2>;
 346                         };
 347
 348                         gpio6: gpio@020b0000 {
 349                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 350                                 reg = <0x020b0000 0x4000>;
 351                                 interrupts = <0 76 0x04 0 77 0x04>;
 352                                 gpio-controller;
 353                                 #gpio-cells = <2>;
 354                                 interrupt-controller;
 355                                 #interrupt-cells = <2>;
 356                         };
 357
 358                         gpio7: gpio@020b4000 {
 359                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 360                                 reg = <0x020b4000 0x4000>;
 361                                 interrupts = <0 78 0x04 0 79 0x04>;
 362                                 gpio-controller;
 363                                 #gpio-cells = <2>;
 364                                 interrupt-controller;
 365                                 #interrupt-cells = <2>;
 366                         };
 367
 368                         kpp: kpp@020b8000 {
 369                                 reg = <0x020b8000 0x4000>;
 370                                 interrupts = <0 82 0x04>;
 371                         };
 372
 373                         wdog1: wdog@020bc000 {
 374                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 375                                 reg = <0x020bc000 0x4000>;
 376                                 interrupts = <0 80 0x04>;
 377                                 clocks = <&clks 0>;
 378                         };
 379
 380                         wdog2: wdog@020c0000 {
 381                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 382                                 reg = <0x020c0000 0x4000>;
 383                                 interrupts = <0 81 0x04>;
 384                                 clocks = <&clks 0>;
 385                                 status = "disabled";
 386                         };
 387
 388                         clks: ccm@020c4000 {
 389                                 compatible = "fsl,imx6q-ccm";
 390                                 reg = <0x020c4000 0x4000>;
 391                                 interrupts = <0 87 0x04 0 88 0x04>;
 392                                 #clock-cells = <1>;
 393                         };
 394
 395                         anatop: anatop@020c8000 {
 396                                 compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 397                                 reg = <0x020c8000 0x1000>;
 398                                 interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 399
 400                                 regulator-1p1@110 {
 401                                         compatible = "fsl,anatop-regulator";
 402                                         regulator-name = "vdd1p1";
 403                                         regulator-min-microvolt = <800000>;
 404                                         regulator-max-microvolt = <1375000>;
 405                                         regulator-always-on;
 406                                         anatop-reg-offset = <0x110>;
 407                                         anatop-vol-bit-shift = <8>;
 408                                         anatop-vol-bit-width = <5>;
 409                                         anatop-min-bit-val = <4>;
 410                                         anatop-min-voltage = <800000>;
 411                                         anatop-max-voltage = <1375000>;
 412                                 };
 413
 414                                 regulator-3p0@120 {
 415                                         compatible = "fsl,anatop-regulator";
 416                                         regulator-name = "vdd3p0";
 417                                         regulator-min-microvolt = <2800000>;
 418                                         regulator-max-microvolt = <3150000>;
 419                                         regulator-always-on;
 420                                         anatop-reg-offset = <0x120>;
 421                                         anatop-vol-bit-shift = <8>;
 422                                         anatop-vol-bit-width = <5>;
 423                                         anatop-min-bit-val = <0>;
 424                                         anatop-min-voltage = <2625000>;
 425                                         anatop-max-voltage = <3400000>;
 426                                 };
 427
 428                                 regulator-2p5@130 {
 429                                         compatible = "fsl,anatop-regulator";
 430                                         regulator-name = "vdd2p5";
 431                                         regulator-min-microvolt = <2000000>;
 432                                         regulator-max-microvolt = <2750000>;
 433                                         regulator-always-on;
 434                                         anatop-reg-offset = <0x130>;
 435                                         anatop-vol-bit-shift = <8>;
 436                                         anatop-vol-bit-width = <5>;
 437                                         anatop-min-bit-val = <0>;
 438                                         anatop-min-voltage = <2000000>;
 439                                         anatop-max-voltage = <2750000>;
 440                                 };
 441
 442                                 reg_arm: regulator-vddcore@140 {
 443                                         compatible = "fsl,anatop-regulator";
 444                                         regulator-name = "cpu";
 445                                         regulator-min-microvolt = <725000>;
 446                                         regulator-max-microvolt = <1450000>;
 447                                         regulator-always-on;
 448                                         anatop-reg-offset = <0x140>;
 449                                         anatop-vol-bit-shift = <0>;
 450                                         anatop-vol-bit-width = <5>;
 451                                         anatop-delay-reg-offset = <0x170>;
 452                                         anatop-delay-bit-shift = <24>;
 453                                         anatop-delay-bit-width = <2>;
 454                                         anatop-min-bit-val = <1>;
 455                                         anatop-min-voltage = <725000>;
 456                                         anatop-max-voltage = <1450000>;
 457                                 };
 458
 459                                 reg_pu: regulator-vddpu@140 {
 460                                         compatible = "fsl,anatop-regulator";
 461                                         regulator-name = "vddpu";
 462                                         regulator-min-microvolt = <725000>;
 463                                         regulator-max-microvolt = <1450000>;
 464                                         regulator-always-on;
 465                                         anatop-reg-offset = <0x140>;
 466                                         anatop-vol-bit-shift = <9>;
 467                                         anatop-vol-bit-width = <5>;
 468                                         anatop-delay-reg-offset = <0x170>;
 469                                         anatop-delay-bit-shift = <26>;
 470                                         anatop-delay-bit-width = <2>;
 471                                         anatop-min-bit-val = <1>;
 472                                         anatop-min-voltage = <725000>;
 473                                         anatop-max-voltage = <1450000>;
 474                                 };
 475
 476                                 reg_soc: regulator-vddsoc@140 {
 477                                         compatible = "fsl,anatop-regulator";
 478                                         regulator-name = "vddsoc";
 479                                         regulator-min-microvolt = <725000>;
 480                                         regulator-max-microvolt = <1450000>;
 481                                         regulator-always-on;
 482                                         anatop-reg-offset = <0x140>;
 483                                         anatop-vol-bit-shift = <18>;
 484                                         anatop-vol-bit-width = <5>;
 485                                         anatop-delay-reg-offset = <0x170>;
 486                                         anatop-delay-bit-shift = <28>;
 487                                         anatop-delay-bit-width = <2>;
 488                                         anatop-min-bit-val = <1>;
 489                                         anatop-min-voltage = <725000>;
 490                                         anatop-max-voltage = <1450000>;
 491                                 };
 492                         };
 493
 494                         usbphy1: usbphy@020c9000 {
 495                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 496                                 reg = <0x020c9000 0x1000>;
 497                                 interrupts = <0 44 0x04>;
 498                                 clocks = <&clks 182>;
 499                         };
 500
 501                         usbphy2: usbphy@020ca000 {
 502                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 503                                 reg = <0x020ca000 0x1000>;
 504                                 interrupts = <0 45 0x04>;
 505                                 clocks = <&clks 183>;
 506                         };
 507
 508                         snvs@020cc000 {
 509                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 510                                 #address-cells = <1>;
 511                                 #size-cells = <1>;
 512                                 ranges = <0 0x020cc000 0x4000>;
 513
 514                                 snvs-rtc-lp@34 {
 515                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 516                                         reg = <0x34 0x58>;
 517                                         interrupts = <0 19 0x04 0 20 0x04>;
 518                                 };
 519                         };
 520
 521                         epit1: epit@020d0000 { /* EPIT1 */
 522                                 reg = <0x020d0000 0x4000>;
 523                                 interrupts = <0 56 0x04>;
 524                         };
 525
 526                         epit2: epit@020d4000 { /* EPIT2 */
 527                                 reg = <0x020d4000 0x4000>;
 528                                 interrupts = <0 57 0x04>;
 529                         };
 530
 531                         src: src@020d8000 {
 532                                 compatible = "fsl,imx6q-src", "fsl,imx51-src";
 533                                 reg = <0x020d8000 0x4000>;
 534                                 interrupts = <0 91 0x04 0 96 0x04>;
 535                                 #reset-cells = <1>;
 536                         };
 537
 538                         gpc: gpc@020dc000 {
 539                                 compatible = "fsl,imx6q-gpc";
 540                                 reg = <0x020dc000 0x4000>;
 541                                 interrupts = <0 89 0x04 0 90 0x04>;
 542                         };
 543
 544                         gpr: iomuxc-gpr@020e0000 {
 545                                 compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
 546                                 reg = <0x020e0000 0x38>;
 547                         };
 548
 549                         ldb: ldb@020e0008 {
 550                                 #address-cells = <1>;
 551                                 #size-cells = <0>;
 552                                 compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
 553                                 gpr = <&gpr>;
 554                                 status = "disabled";
 555
 556                                 lvds-channel@0 {
 557                                         reg = <0>;
 558                                         crtcs = <&ipu1 0>;
 559                                         status = "disabled";
 560                                 };
 561
 562                                 lvds-channel@1 {
 563                                         reg = <1>;
 564                                         crtcs = <&ipu1 1>;
 565                                         status = "disabled";
 566                                 };
 567                         };
 568
 569                         dcic1: dcic@020e4000 {
 570                                 reg = <0x020e4000 0x4000>;
 571                                 interrupts = <0 124 0x04>;
 572                         };
 573
 574                         dcic2: dcic@020e8000 {
 575                                 reg = <0x020e8000 0x4000>;
 576                                 interrupts = <0 125 0x04>;
 577                         };
 578
 579                         sdma: sdma@020ec000 {
 580                                 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 581                                 reg = <0x020ec000 0x4000>;
 582                                 interrupts = <0 2 0x04>;
 583                                 clocks = <&clks 155>, <&clks 155>;
 584                                 clock-names = "ipg", "ahb";
 585                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 586                         };
 587                 };
 588
 589                 aips-bus@02100000 { /* AIPS2 */
 590                         compatible = "fsl,aips-bus", "simple-bus";
 591                         #address-cells = <1>;
 592                         #size-cells = <1>;
 593                         reg = <0x02100000 0x100000>;
 594                         ranges;
 595
 596                         caam@02100000 {
 597                                 reg = <0x02100000 0x40000>;
 598                                 interrupts = <0 105 0x04 0 106 0x04>;
 599                         };
 600
 601                         aipstz@0217c000 { /* AIPSTZ2 */
 602                                 reg = <0x0217c000 0x4000>;
 603                         };
 604
 605                         usbotg: usb@02184000 {
 606                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 607                                 reg = <0x02184000 0x200>;
 608                                 interrupts = <0 43 0x04>;
 609                                 clocks = <&clks 162>;
 610                                 fsl,usbphy = <&usbphy1>;
 611                                 fsl,usbmisc = <&usbmisc 0>;
 612                                 status = "disabled";
 613                         };
 614
 615                         usbh1: usb@02184200 {
 616                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 617                                 reg = <0x02184200 0x200>;
 618                                 interrupts = <0 40 0x04>;
 619                                 clocks = <&clks 162>;
 620                                 fsl,usbphy = <&usbphy2>;
 621                                 fsl,usbmisc = <&usbmisc 1>;
 622                                 status = "disabled";
 623                         };
 624
 625                         usbh2: usb@02184400 {
 626                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 627                                 reg = <0x02184400 0x200>;
 628                                 interrupts = <0 41 0x04>;
 629                                 clocks = <&clks 162>;
 630                                 fsl,usbmisc = <&usbmisc 2>;
 631                                 status = "disabled";
 632                         };
 633
 634                         usbh3: usb@02184600 {
 635                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 636                                 reg = <0x02184600 0x200>;
 637                                 interrupts = <0 42 0x04>;
 638                                 clocks = <&clks 162>;
 639                                 fsl,usbmisc = <&usbmisc 3>;
 640                                 status = "disabled";
 641                         };
 642
 643                         usbmisc: usbmisc@02184800 {
 644                                 #index-cells = <1>;
 645                                 compatible = "fsl,imx6q-usbmisc";
 646                                 reg = <0x02184800 0x200>;
 647                                 clocks = <&clks 162>;
 648                         };
 649
 650                         fec: ethernet@02188000 {
 651                                 compatible = "fsl,imx6q-fec";
 652                                 reg = <0x02188000 0x4000>;
 653                                 interrupts = <0 118 0x04 0 119 0x04>;
 654                                 clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 655                                 clock-names = "ipg", "ahb", "ptp";
 656                                 status = "disabled";
 657                         };
 658
 659                         mlb@0218c000 {
 660                                 reg = <0x0218c000 0x4000>;
 661                                 interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
 662                         };
 663
 664                         usdhc1: usdhc@02190000 {
 665                                 compatible = "fsl,imx6q-usdhc";
 666                                 reg = <0x02190000 0x4000>;
 667                                 interrupts = <0 22 0x04>;
 668                                 clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 669                                 clock-names = "ipg", "ahb", "per";
 670                                 bus-width = <4>;
 671                                 status = "disabled";
 672                         };
 673
 674                         usdhc2: usdhc@02194000 {
 675                                 compatible = "fsl,imx6q-usdhc";
 676                                 reg = <0x02194000 0x4000>;
 677                                 interrupts = <0 23 0x04>;
 678                                 clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 679                                 clock-names = "ipg", "ahb", "per";
 680                                 bus-width = <4>;
 681                                 status = "disabled";
 682                         };
 683
 684                         usdhc3: usdhc@02198000 {
 685                                 compatible = "fsl,imx6q-usdhc";
 686                                 reg = <0x02198000 0x4000>;
 687                                 interrupts = <0 24 0x04>;
 688                                 clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 689                                 clock-names = "ipg", "ahb", "per";
 690                                 bus-width = <4>;
 691                                 status = "disabled";
 692                         };
 693
 694                         usdhc4: usdhc@0219c000 {
 695                                 compatible = "fsl,imx6q-usdhc";
 696                                 reg = <0x0219c000 0x4000>;
 697                                 interrupts = <0 25 0x04>;
 698                                 clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 699                                 clock-names = "ipg", "ahb", "per";
 700                                 bus-width = <4>;
 701                                 status = "disabled";
 702                         };
 703
 704                         i2c1: i2c@021a0000 {
 705                                 #address-cells = <1>;
 706                                 #size-cells = <0>;
 707                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 708                                 reg = <0x021a0000 0x4000>;
 709                                 interrupts = <0 36 0x04>;
 710                                 clocks = <&clks 125>;
 711                                 status = "disabled";
 712                         };
 713
 714                         i2c2: i2c@021a4000 {
 715                                 #address-cells = <1>;
 716                                 #size-cells = <0>;
 717                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 718                                 reg = <0x021a4000 0x4000>;
 719                                 interrupts = <0 37 0x04>;
 720                                 clocks = <&clks 126>;
 721                                 status = "disabled";
 722                         };
 723
 724                         i2c3: i2c@021a8000 {
 725                                 #address-cells = <1>;
 726                                 #size-cells = <0>;
 727                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 728                                 reg = <0x021a8000 0x4000>;
 729                                 interrupts = <0 38 0x04>;
 730                                 clocks = <&clks 127>;
 731                                 status = "disabled";
 732                         };
 733
 734                         romcp@021ac000 {
 735                                 reg = <0x021ac000 0x4000>;
 736                         };
 737
 738                         mmdc0: mmdc@021b0000 { /* MMDC0 */
 739                                 compatible = "fsl,imx6q-mmdc";
 740                                 reg = <0x021b0000 0x4000>;
 741                         };
 742
 743                         mmdc1: mmdc@021b4000 { /* MMDC1 */
 744                                 reg = <0x021b4000 0x4000>;
 745                         };
 746
 747                         weim: weim@021b8000 {
 748                                 compatible = "fsl,imx6q-weim";
 749                                 reg = <0x021b8000 0x4000>;
 750                                 interrupts = <0 14 0x04>;
 751                                 clocks = <&clks 196>;
 752                         };
 753
 754                         ocotp@021bc000 {
 755                                 compatible = "fsl,imx6q-ocotp";
 756                                 reg = <0x021bc000 0x4000>;
 757                         };
 758
 759                         tzasc@021d0000 { /* TZASC1 */
 760                                 reg = <0x021d0000 0x4000>;
 761                                 interrupts = <0 108 0x04>;
 762                         };
 763
 764                         tzasc@021d4000 { /* TZASC2 */
 765                                 reg = <0x021d4000 0x4000>;
 766                                 interrupts = <0 109 0x04>;
 767                         };
 768
 769                         audmux: audmux@021d8000 {
 770                                 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 771                                 reg = <0x021d8000 0x4000>;
 772                                 status = "disabled";
 773                         };
 774
 775                         mipi@021dc000 { /* MIPI-CSI */
 776                                 reg = <0x021dc000 0x4000>;
 777                         };
 778
 779                         mipi@021e0000 { /* MIPI-DSI */
 780                                 reg = <0x021e0000 0x4000>;
 781                         };
 782
 783                         vdoa@021e4000 {
 784                                 reg = <0x021e4000 0x4000>;
 785                                 interrupts = <0 18 0x04>;
 786                         };
 787
 788                         uart2: serial@021e8000 {
 789                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 790                                 reg = <0x021e8000 0x4000>;
 791                                 interrupts = <0 27 0x04>;
 792                                 clocks = <&clks 160>, <&clks 161>;
 793                                 clock-names = "ipg", "per";
 794                                 status = "disabled";
 795                         };
 796
 797                         uart3: serial@021ec000 {
 798                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 799                                 reg = <0x021ec000 0x4000>;
 800                                 interrupts = <0 28 0x04>;
 801                                 clocks = <&clks 160>, <&clks 161>;
 802                                 clock-names = "ipg", "per";
 803                                 status = "disabled";
 804                         };
 805
 806                         uart4: serial@021f0000 {
 807                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 808                                 reg = <0x021f0000 0x4000>;
 809                                 interrupts = <0 29 0x04>;
 810                                 clocks = <&clks 160>, <&clks 161>;
 811                                 clock-names = "ipg", "per";
 812                                 status = "disabled";
 813                         };
 814
 815                         uart5: serial@021f4000 {
 816                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 817                                 reg = <0x021f4000 0x4000>;
 818                                 interrupts = <0 30 0x04>;
 819                                 clocks = <&clks 160>, <&clks 161>;
 820                                 clock-names = "ipg", "per";
 821                                 status = "disabled";
 822                         };
 823                 };
 824
 825                 ipu1: ipu@02400000 {
 826                         #crtc-cells = <1>;
 827                         compatible = "fsl,imx6q-ipu";
 828                         reg = <0x02400000 0x400000>;
 829                         interrupts = <0 6 0x4 0 5 0x4>;
 830                         clocks = <&clks 130>, <&clks 131>, <&clks 132>;
 831                         clock-names = "bus", "di0", "di1";
 832                         resets = <&src 2>;
 833                 };
 834         };
 835 };