arch/arm/boot/dts/imx6qdl.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2011 Freescale Semiconductor, Inc.
   4 // Copyright 2011 Linaro Ltd.
   5
   6 #include <dt-bindings/clock/imx6qdl-clock.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/arm-gic.h>
   9
  10 / {
  11         #address-cells = <1>;
  12         #size-cells = <1>;
  13         /*
  14          * The decompressor and also some bootloaders rely on a
  15          * pre-existing /chosen node to be available to insert the
  16          * command line and merge other ATAGS info.
  17          */
  18         chosen {};
  19
  20         aliases {
  21                 ethernet0 = &fec;
  22                 can0 = &can1;
  23                 can1 = &can2;
  24                 gpio0 = &gpio1;
  25                 gpio1 = &gpio2;
  26                 gpio2 = &gpio3;
  27                 gpio3 = &gpio4;
  28                 gpio4 = &gpio5;
  29                 gpio5 = &gpio6;
  30                 gpio6 = &gpio7;
  31                 i2c0 = &i2c1;
  32                 i2c1 = &i2c2;
  33                 i2c2 = &i2c3;
  34                 ipu0 = &ipu1;
  35                 mmc0 = &usdhc1;
  36                 mmc1 = &usdhc2;
  37                 mmc2 = &usdhc3;
  38                 mmc3 = &usdhc4;
  39                 serial0 = &uart1;
  40                 serial1 = &uart2;
  41                 serial2 = &uart3;
  42                 serial3 = &uart4;
  43                 serial4 = &uart5;
  44                 spi0 = &ecspi1;
  45                 spi1 = &ecspi2;
  46                 spi2 = &ecspi3;
  47                 spi3 = &ecspi4;
  48                 usbphy0 = &usbphy1;
  49                 usbphy1 = &usbphy2;
  50         };
  51
  52         clocks {
  53                 ckil {
  54                         compatible = "fsl,imx-ckil", "fixed-clock";
  55                         #clock-cells = <0>;
  56                         clock-frequency = <32768>;
  57                 };
  58
  59                 ckih1 {
  60                         compatible = "fsl,imx-ckih1", "fixed-clock";
  61                         #clock-cells = <0>;
  62                         clock-frequency = <0>;
  63                 };
  64
  65                 osc {
  66                         compatible = "fsl,imx-osc", "fixed-clock";
  67                         #clock-cells = <0>;
  68                         clock-frequency = <24000000>;
  69                 };
  70         };
  71
  72         tempmon: tempmon {
  73                 compatible = "fsl,imx6q-tempmon";
  74                 interrupt-parent = <&gpc>;
  75                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
  76                 fsl,tempmon = <&anatop>;
  77                 fsl,tempmon-data = <&ocotp>;
  78                 clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
  79                 #thermal-sensor-cells = <0>;
  80         };
  81
  82         ldb: ldb {
  83                 #address-cells = <1>;
  84                 #size-cells = <0>;
  85                 compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
  86                 gpr = <&gpr>;
  87                 status = "disabled";
  88
  89                 lvds-channel@0 {
  90                         #address-cells = <1>;
  91                         #size-cells = <0>;
  92                         reg = <0>;
  93                         status = "disabled";
  94
  95                         port@0 {
  96                                 reg = <0>;
  97
  98                                 lvds0_mux_0: endpoint {
  99                                         remote-endpoint = <&ipu1_di0_lvds0>;
 100                                 };
 101                         };
 102
 103                         port@1 {
 104                                 reg = <1>;
 105
 106                                 lvds0_mux_1: endpoint {
 107                                         remote-endpoint = <&ipu1_di1_lvds0>;
 108                                 };
 109                         };
 110                 };
 111
 112                 lvds-channel@1 {
 113                         #address-cells = <1>;
 114                         #size-cells = <0>;
 115                         reg = <1>;
 116                         status = "disabled";
 117
 118                         port@0 {
 119                                 reg = <0>;
 120
 121                                 lvds1_mux_0: endpoint {
 122                                         remote-endpoint = <&ipu1_di0_lvds1>;
 123                                 };
 124                         };
 125
 126                         port@1 {
 127                                 reg = <1>;
 128
 129                                 lvds1_mux_1: endpoint {
 130                                         remote-endpoint = <&ipu1_di1_lvds1>;
 131                                 };
 132                         };
 133                 };
 134         };
 135
 136         pmu: pmu {
 137                 compatible = "arm,cortex-a9-pmu";
 138                 interrupt-parent = <&gpc>;
 139                 interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 140         };
 141
 142         usbphynop1: usbphynop1 {
 143                 compatible = "usb-nop-xceiv";
 144                 #phy-cells = <0>;
 145         };
 146
 147         usbphynop2: usbphynop2 {
 148                 compatible = "usb-nop-xceiv";
 149                 #phy-cells = <0>;
 150         };
 151
 152         soc {
 153                 #address-cells = <1>;
 154                 #size-cells = <1>;
 155                 compatible = "simple-bus";
 156                 interrupt-parent = <&gpc>;
 157                 ranges;
 158
 159                 dma_apbh: dma-apbh@110000 {
 160                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 161                         reg = <0x00110000 0x2000>;
 162                         interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 163                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 164                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 165                                      <0 13 IRQ_TYPE_LEVEL_HIGH>;
 166                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 167                         #dma-cells = <1>;
 168                         dma-channels = <4>;
 169                         clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
 170                 };
 171
 172                 gpmi: gpmi-nand@112000 {
 173                         compatible = "fsl,imx6q-gpmi-nand";
 174                         reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 175                         reg-names = "gpmi-nand", "bch";
 176                         interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 177                         interrupt-names = "bch";
 178                         clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
 179                                  <&clks IMX6QDL_CLK_GPMI_APB>,
 180                                  <&clks IMX6QDL_CLK_GPMI_BCH>,
 181                                  <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
 182                                  <&clks IMX6QDL_CLK_PER1_BCH>;
 183                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 184                                       "gpmi_bch_apb", "per1_bch";
 185                         dmas = <&dma_apbh 0>;
 186                         dma-names = "rx-tx";
 187                         status = "disabled";
 188                 };
 189
 190                 hdmi: hdmi@120000 {
 191                         #address-cells = <1>;
 192                         #size-cells = <0>;
 193                         reg = <0x00120000 0x9000>;
 194                         interrupts = <0 115 0x04>;
 195                         gpr = <&gpr>;
 196                         clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
 197                                  <&clks IMX6QDL_CLK_HDMI_ISFR>;
 198                         clock-names = "iahb", "isfr";
 199                         status = "disabled";
 200
 201                         port@0 {
 202                                 reg = <0>;
 203
 204                                 hdmi_mux_0: endpoint {
 205                                         remote-endpoint = <&ipu1_di0_hdmi>;
 206                                 };
 207                         };
 208
 209                         port@1 {
 210                                 reg = <1>;
 211
 212                                 hdmi_mux_1: endpoint {
 213                                         remote-endpoint = <&ipu1_di1_hdmi>;
 214                                 };
 215                         };
 216                 };
 217
 218                 gpu_3d: gpu@130000 {
 219                         compatible = "vivante,gc";
 220                         reg = <0x00130000 0x4000>;
 221                         interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
 222                         clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
 223                                  <&clks IMX6QDL_CLK_GPU3D_CORE>,
 224                                  <&clks IMX6QDL_CLK_GPU3D_SHADER>;
 225                         clock-names = "bus", "core", "shader";
 226                         power-domains = <&pd_pu>;
 227                         #cooling-cells = <2>;
 228                 };
 229
 230                 gpu_2d: gpu@134000 {
 231                         compatible = "vivante,gc";
 232                         reg = <0x00134000 0x4000>;
 233                         interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 234                         clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
 235                                  <&clks IMX6QDL_CLK_GPU2D_CORE>;
 236                         clock-names = "bus", "core";
 237                         power-domains = <&pd_pu>;
 238                         #cooling-cells = <2>;
 239                 };
 240
 241                 timer@a00600 {
 242                         compatible = "arm,cortex-a9-twd-timer";
 243                         reg = <0x00a00600 0x20>;
 244                         interrupts = <1 13 0xf01>;
 245                         interrupt-parent = <&intc>;
 246                         clocks = <&clks IMX6QDL_CLK_TWD>;
 247                 };
 248
 249                 intc: interrupt-controller@a01000 {
 250                         compatible = "arm,cortex-a9-gic";
 251                         #interrupt-cells = <3>;
 252                         interrupt-controller;
 253                         reg = <0x00a01000 0x1000>,
 254                               <0x00a00100 0x100>;
 255                         interrupt-parent = <&intc>;
 256                 };
 257
 258                 L2: l2-cache@a02000 {
 259                         compatible = "arm,pl310-cache";
 260                         reg = <0x00a02000 0x1000>;
 261                         interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 262                         cache-unified;
 263                         cache-level = <2>;
 264                         arm,tag-latency = <4 2 3>;
 265                         arm,data-latency = <4 2 3>;
 266                         arm,shared-override;
 267                 };
 268
 269                 pcie: pcie@1ffc000 {
 270                         compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
 271                         reg = <0x01ffc000 0x04000>,
 272                               <0x01f00000 0x80000>;
 273                         reg-names = "dbi", "config";
 274                         #address-cells = <3>;
 275                         #size-cells = <2>;
 276                         device_type = "pci";
 277                         bus-range = <0x00 0xff>;
 278                         ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 279                                   0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 280                         num-lanes = <1>;
 281                         num-viewport = <4>;
 282                         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 283                         interrupt-names = "msi";
 284                         #interrupt-cells = <1>;
 285                         interrupt-map-mask = <0 0 0 0x7>;
 286                         interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 287                                         <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 288                                         <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 289                                         <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 290                         clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 291                                  <&clks IMX6QDL_CLK_LVDS1_GATE>,
 292                                  <&clks IMX6QDL_CLK_PCIE_REF_125M>;
 293                         clock-names = "pcie", "pcie_bus", "pcie_phy";
 294                         status = "disabled";
 295                 };
 296
 297                 aips-bus@2000000 { /* AIPS1 */
 298                         compatible = "fsl,aips-bus", "simple-bus";
 299                         #address-cells = <1>;
 300                         #size-cells = <1>;
 301                         reg = <0x02000000 0x100000>;
 302                         ranges;
 303
 304                         spba-bus@2000000 {
 305                                 compatible = "fsl,spba-bus", "simple-bus";
 306                                 #address-cells = <1>;
 307                                 #size-cells = <1>;
 308                                 reg = <0x02000000 0x40000>;
 309                                 ranges;
 310
 311                                 spdif: spdif@2004000 {
 312                                         compatible = "fsl,imx35-spdif";
 313                                         reg = <0x02004000 0x4000>;
 314                                         interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 315                                         dmas = <&sdma 14 18 0>,
 316                                                <&sdma 15 18 0>;
 317                                         dma-names = "rx", "tx";
 318                                         clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 319                                                  <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 320                                                  <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 321                                                  <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 322                                                  <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 323                                         clock-names = "core",  "rxtx0",
 324                                                       "rxtx1", "rxtx2",
 325                                                       "rxtx3", "rxtx4",
 326                                                       "rxtx5", "rxtx6",
 327                                                       "rxtx7", "spba";
 328                                         status = "disabled";
 329                                 };
 330
 331                                 ecspi1: spi@2008000 {
 332                                         #address-cells = <1>;
 333                                         #size-cells = <0>;
 334                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 335                                         reg = <0x02008000 0x4000>;
 336                                         interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 337                                         clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 338                                                  <&clks IMX6QDL_CLK_ECSPI1>;
 339                                         clock-names = "ipg", "per";
 340                                         dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
 341                                         dma-names = "rx", "tx";
 342                                         status = "disabled";
 343                                 };
 344
 345                                 ecspi2: spi@200c000 {
 346                                         #address-cells = <1>;
 347                                         #size-cells = <0>;
 348                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 349                                         reg = <0x0200c000 0x4000>;
 350                                         interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 351                                         clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 352                                                  <&clks IMX6QDL_CLK_ECSPI2>;
 353                                         clock-names = "ipg", "per";
 354                                         dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
 355                                         dma-names = "rx", "tx";
 356                                         status = "disabled";
 357                                 };
 358
 359                                 ecspi3: spi@2010000 {
 360                                         #address-cells = <1>;
 361                                         #size-cells = <0>;
 362                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 363                                         reg = <0x02010000 0x4000>;
 364                                         interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 365                                         clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 366                                                  <&clks IMX6QDL_CLK_ECSPI3>;
 367                                         clock-names = "ipg", "per";
 368                                         dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
 369                                         dma-names = "rx", "tx";
 370                                         status = "disabled";
 371                                 };
 372
 373                                 ecspi4: spi@2014000 {
 374                                         #address-cells = <1>;
 375                                         #size-cells = <0>;
 376                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 377                                         reg = <0x02014000 0x4000>;
 378                                         interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 379                                         clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 380                                                  <&clks IMX6QDL_CLK_ECSPI4>;
 381                                         clock-names = "ipg", "per";
 382                                         dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
 383                                         dma-names = "rx", "tx";
 384                                         status = "disabled";
 385                                 };
 386
 387                                 uart1: serial@2020000 {
 388                                         compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 389                                         reg = <0x02020000 0x4000>;
 390                                         interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 391                                         clocks = <&clks IMX6QDL_CLK_UART_IPG>,
 392                                                  <&clks IMX6QDL_CLK_UART_SERIAL>;
 393                                         clock-names = "ipg", "per";
 394                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 395                                         dma-names = "rx", "tx";
 396                                         status = "disabled";
 397                                 };
 398
 399                                 esai: esai@2024000 {
 400                                         #sound-dai-cells = <0>;
 401                                         compatible = "fsl,imx35-esai";
 402                                         reg = <0x02024000 0x4000>;
 403                                         interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 404                                         clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
 405                                                  <&clks IMX6QDL_CLK_ESAI_MEM>,
 406                                                  <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 407                                                  <&clks IMX6QDL_CLK_ESAI_IPG>,
 408                                                  <&clks IMX6QDL_CLK_SPBA>;
 409                                         clock-names = "core", "mem", "extal", "fsys", "spba";
 410                                         dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
 411                                         dma-names = "rx", "tx";
 412                                         status = "disabled";
 413                                 };
 414
 415                                 ssi1: ssi@2028000 {
 416                                         #sound-dai-cells = <0>;
 417                                         compatible = "fsl,imx6q-ssi",
 418                                                         "fsl,imx51-ssi";
 419                                         reg = <0x02028000 0x4000>;
 420                                         interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 421                                         clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
 422                                                  <&clks IMX6QDL_CLK_SSI1>;
 423                                         clock-names = "ipg", "baud";
 424                                         dmas = <&sdma 37 1 0>,
 425                                                <&sdma 38 1 0>;
 426                                         dma-names = "rx", "tx";
 427                                         fsl,fifo-depth = <15>;
 428                                         status = "disabled";
 429                                 };
 430
 431                                 ssi2: ssi@202c000 {
 432                                         #sound-dai-cells = <0>;
 433                                         compatible = "fsl,imx6q-ssi",
 434                                                         "fsl,imx51-ssi";
 435                                         reg = <0x0202c000 0x4000>;
 436                                         interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 437                                         clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
 438                                                  <&clks IMX6QDL_CLK_SSI2>;
 439                                         clock-names = "ipg", "baud";
 440                                         dmas = <&sdma 41 1 0>,
 441                                                <&sdma 42 1 0>;
 442                                         dma-names = "rx", "tx";
 443                                         fsl,fifo-depth = <15>;
 444                                         status = "disabled";
 445                                 };
 446
 447                                 ssi3: ssi@2030000 {
 448                                         #sound-dai-cells = <0>;
 449                                         compatible = "fsl,imx6q-ssi",
 450                                                         "fsl,imx51-ssi";
 451                                         reg = <0x02030000 0x4000>;
 452                                         interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 453                                         clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
 454                                                  <&clks IMX6QDL_CLK_SSI3>;
 455                                         clock-names = "ipg", "baud";
 456                                         dmas = <&sdma 45 1 0>,
 457                                                <&sdma 46 1 0>;
 458                                         dma-names = "rx", "tx";
 459                                         fsl,fifo-depth = <15>;
 460                                         status = "disabled";
 461                                 };
 462
 463                                 asrc: asrc@2034000 {
 464                                         compatible = "fsl,imx53-asrc";
 465                                         reg = <0x02034000 0x4000>;
 466                                         interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
 467                                         clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
 468                                                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
 469                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 470                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 471                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 472                                                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
 473                                                 <&clks IMX6QDL_CLK_SPBA>;
 474                                         clock-names = "mem", "ipg", "asrck_0",
 475                                                 "asrck_1", "asrck_2", "asrck_3", "asrck_4",
 476                                                 "asrck_5", "asrck_6", "asrck_7", "asrck_8",
 477                                                 "asrck_9", "asrck_a", "asrck_b", "asrck_c",
 478                                                 "asrck_d", "asrck_e", "asrck_f", "spba";
 479                                         dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
 480                                                 <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 481                                         dma-names = "rxa", "rxb", "rxc",
 482                                                         "txa", "txb", "txc";
 483                                         fsl,asrc-rate  = <48000>;
 484                                         fsl,asrc-width = <16>;
 485                                         status = "okay";
 486                                 };
 487
 488                                 spba@203c000 {
 489                                         reg = <0x0203c000 0x4000>;
 490                                 };
 491                         };
 492
 493                         vpu: vpu@2040000 {
 494                                 compatible = "cnm,coda960";
 495                                 reg = <0x02040000 0x3c000>;
 496                                 interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
 497                                              <0 3 IRQ_TYPE_LEVEL_HIGH>;
 498                                 interrupt-names = "bit", "jpeg";
 499                                 clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 500                                          <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
 501                                 clock-names = "per", "ahb";
 502                                 power-domains = <&pd_pu>;
 503                                 resets = <&src 1>;
 504                                 iram = <&ocram>;
 505                         };
 506
 507                         aipstz@207c000 { /* AIPSTZ1 */
 508                                 reg = <0x0207c000 0x4000>;
 509                         };
 510
 511                         pwm1: pwm@2080000 {
 512                                 #pwm-cells = <2>;
 513                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 514                                 reg = <0x02080000 0x4000>;
 515                                 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 516                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 517                                          <&clks IMX6QDL_CLK_PWM1>;
 518                                 clock-names = "ipg", "per";
 519                                 status = "disabled";
 520                         };
 521
 522                         pwm2: pwm@2084000 {
 523                                 #pwm-cells = <2>;
 524                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 525                                 reg = <0x02084000 0x4000>;
 526                                 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 527                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 528                                          <&clks IMX6QDL_CLK_PWM2>;
 529                                 clock-names = "ipg", "per";
 530                                 status = "disabled";
 531                         };
 532
 533                         pwm3: pwm@2088000 {
 534                                 #pwm-cells = <2>;
 535                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 536                                 reg = <0x02088000 0x4000>;
 537                                 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 538                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 539                                          <&clks IMX6QDL_CLK_PWM3>;
 540                                 clock-names = "ipg", "per";
 541                                 status = "disabled";
 542                         };
 543
 544                         pwm4: pwm@208c000 {
 545                                 #pwm-cells = <2>;
 546                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 547                                 reg = <0x0208c000 0x4000>;
 548                                 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 549                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 550                                          <&clks IMX6QDL_CLK_PWM4>;
 551                                 clock-names = "ipg", "per";
 552                                 status = "disabled";
 553                         };
 554
 555                         can1: flexcan@2090000 {
 556                                 compatible = "fsl,imx6q-flexcan";
 557                                 reg = <0x02090000 0x4000>;
 558                                 interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 559                                 clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
 560                                          <&clks IMX6QDL_CLK_CAN1_SERIAL>;
 561                                 clock-names = "ipg", "per";
 562                                 fsl,stop-mode = <&gpr 0x34 28 0x10 17>;
 563                                 status = "disabled";
 564                         };
 565
 566                         can2: flexcan@2094000 {
 567                                 compatible = "fsl,imx6q-flexcan";
 568                                 reg = <0x02094000 0x4000>;
 569                                 interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 570                                 clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
 571                                          <&clks IMX6QDL_CLK_CAN2_SERIAL>;
 572                                 clock-names = "ipg", "per";
 573                                 fsl,stop-mode = <&gpr 0x34 29 0x10 18>;
 574                                 status = "disabled";
 575                         };
 576
 577                         gpt: gpt@2098000 {
 578                                 compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 579                                 reg = <0x02098000 0x4000>;
 580                                 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 581                                 clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
 582                                          <&clks IMX6QDL_CLK_GPT_IPG_PER>,
 583                                          <&clks IMX6QDL_CLK_GPT_3M>;
 584                                 clock-names = "ipg", "per", "osc_per";
 585                         };
 586
 587                         gpio1: gpio@209c000 {
 588                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 589                                 reg = <0x0209c000 0x4000>;
 590                                 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
 591                                              <0 67 IRQ_TYPE_LEVEL_HIGH>;
 592                                 gpio-controller;
 593                                 #gpio-cells = <2>;
 594                                 interrupt-controller;
 595                                 #interrupt-cells = <2>;
 596                         };
 597
 598                         gpio2: gpio@20a0000 {
 599                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 600                                 reg = <0x020a0000 0x4000>;
 601                                 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
 602                                              <0 69 IRQ_TYPE_LEVEL_HIGH>;
 603                                 gpio-controller;
 604                                 #gpio-cells = <2>;
 605                                 interrupt-controller;
 606                                 #interrupt-cells = <2>;
 607                         };
 608
 609                         gpio3: gpio@20a4000 {
 610                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 611                                 reg = <0x020a4000 0x4000>;
 612                                 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
 613                                              <0 71 IRQ_TYPE_LEVEL_HIGH>;
 614                                 gpio-controller;
 615                                 #gpio-cells = <2>;
 616                                 interrupt-controller;
 617                                 #interrupt-cells = <2>;
 618                         };
 619
 620                         gpio4: gpio@20a8000 {
 621                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 622                                 reg = <0x020a8000 0x4000>;
 623                                 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
 624                                              <0 73 IRQ_TYPE_LEVEL_HIGH>;
 625                                 gpio-controller;
 626                                 #gpio-cells = <2>;
 627                                 interrupt-controller;
 628                                 #interrupt-cells = <2>;
 629                         };
 630
 631                         gpio5: gpio@20ac000 {
 632                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 633                                 reg = <0x020ac000 0x4000>;
 634                                 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
 635                                              <0 75 IRQ_TYPE_LEVEL_HIGH>;
 636                                 gpio-controller;
 637                                 #gpio-cells = <2>;
 638                                 interrupt-controller;
 639                                 #interrupt-cells = <2>;
 640                         };
 641
 642                         gpio6: gpio@20b0000 {
 643                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 644                                 reg = <0x020b0000 0x4000>;
 645                                 interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
 646                                              <0 77 IRQ_TYPE_LEVEL_HIGH>;
 647                                 gpio-controller;
 648                                 #gpio-cells = <2>;
 649                                 interrupt-controller;
 650                                 #interrupt-cells = <2>;
 651                         };
 652
 653                         gpio7: gpio@20b4000 {
 654                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 655                                 reg = <0x020b4000 0x4000>;
 656                                 interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
 657                                              <0 79 IRQ_TYPE_LEVEL_HIGH>;
 658                                 gpio-controller;
 659                                 #gpio-cells = <2>;
 660                                 interrupt-controller;
 661                                 #interrupt-cells = <2>;
 662                         };
 663
 664                         kpp: kpp@20b8000 {
 665                                 compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
 666                                 reg = <0x020b8000 0x4000>;
 667                                 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 668                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 669                                 status = "disabled";
 670                         };
 671
 672                         wdog1: wdog@20bc000 {
 673                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 674                                 reg = <0x020bc000 0x4000>;
 675                                 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 676                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 677                         };
 678
 679                         wdog2: wdog@20c0000 {
 680                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 681                                 reg = <0x020c0000 0x4000>;
 682                                 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 683                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 684                                 status = "disabled";
 685                         };
 686
 687                         clks: ccm@20c4000 {
 688                                 compatible = "fsl,imx6q-ccm";
 689                                 reg = <0x020c4000 0x4000>;
 690                                 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
 691                                              <0 88 IRQ_TYPE_LEVEL_HIGH>;
 692                                 #clock-cells = <1>;
 693                         };
 694
 695                         anatop: anatop@20c8000 {
 696                                 compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
 697                                 reg = <0x020c8000 0x1000>;
 698                                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
 699                                              <0 54 IRQ_TYPE_LEVEL_HIGH>,
 700                                              <0 127 IRQ_TYPE_LEVEL_HIGH>;
 701
 702                                 reg_vdd1p1: regulator-1p1 {
 703                                         compatible = "fsl,anatop-regulator";
 704                                         regulator-name = "vdd1p1";
 705                                         regulator-min-microvolt = <1000000>;
 706                                         regulator-max-microvolt = <1200000>;
 707                                         regulator-always-on;
 708                                         anatop-reg-offset = <0x110>;
 709                                         anatop-vol-bit-shift = <8>;
 710                                         anatop-vol-bit-width = <5>;
 711                                         anatop-min-bit-val = <4>;
 712                                         anatop-min-voltage = <800000>;
 713                                         anatop-max-voltage = <1375000>;
 714                                         anatop-enable-bit = <0>;
 715                                 };
 716
 717                                 reg_vdd3p0: regulator-3p0 {
 718                                         compatible = "fsl,anatop-regulator";
 719                                         regulator-name = "vdd3p0";
 720                                         regulator-min-microvolt = <2800000>;
 721                                         regulator-max-microvolt = <3150000>;
 722                                         regulator-always-on;
 723                                         anatop-reg-offset = <0x120>;
 724                                         anatop-vol-bit-shift = <8>;
 725                                         anatop-vol-bit-width = <5>;
 726                                         anatop-min-bit-val = <0>;
 727                                         anatop-min-voltage = <2625000>;
 728                                         anatop-max-voltage = <3400000>;
 729                                         anatop-enable-bit = <0>;
 730                                 };
 731
 732                                 reg_vdd2p5: regulator-2p5 {
 733                                         compatible = "fsl,anatop-regulator";
 734                                         regulator-name = "vdd2p5";
 735                                         regulator-min-microvolt = <2250000>;
 736                                         regulator-max-microvolt = <2750000>;
 737                                         regulator-always-on;
 738                                         anatop-reg-offset = <0x130>;
 739                                         anatop-vol-bit-shift = <8>;
 740                                         anatop-vol-bit-width = <5>;
 741                                         anatop-min-bit-val = <0>;
 742                                         anatop-min-voltage = <2100000>;
 743                                         anatop-max-voltage = <2875000>;
 744                                         anatop-enable-bit = <0>;
 745                                 };
 746
 747                                 reg_arm: regulator-vddcore {
 748                                         compatible = "fsl,anatop-regulator";
 749                                         regulator-name = "vddarm";
 750                                         regulator-min-microvolt = <725000>;
 751                                         regulator-max-microvolt = <1450000>;
 752                                         regulator-always-on;
 753                                         anatop-reg-offset = <0x140>;
 754                                         anatop-vol-bit-shift = <0>;
 755                                         anatop-vol-bit-width = <5>;
 756                                         anatop-delay-reg-offset = <0x170>;
 757                                         anatop-delay-bit-shift = <24>;
 758                                         anatop-delay-bit-width = <2>;
 759                                         anatop-min-bit-val = <1>;
 760                                         anatop-min-voltage = <725000>;
 761                                         anatop-max-voltage = <1450000>;
 762                                 };
 763
 764                                 reg_pu: regulator-vddpu {
 765                                         compatible = "fsl,anatop-regulator";
 766                                         regulator-name = "vddpu";
 767                                         regulator-min-microvolt = <725000>;
 768                                         regulator-max-microvolt = <1450000>;
 769                                         regulator-enable-ramp-delay = <150>;
 770                                         anatop-reg-offset = <0x140>;
 771                                         anatop-vol-bit-shift = <9>;
 772                                         anatop-vol-bit-width = <5>;
 773                                         anatop-delay-reg-offset = <0x170>;
 774                                         anatop-delay-bit-shift = <26>;
 775                                         anatop-delay-bit-width = <2>;
 776                                         anatop-min-bit-val = <1>;
 777                                         anatop-min-voltage = <725000>;
 778                                         anatop-max-voltage = <1450000>;
 779                                 };
 780
 781                                 reg_soc: regulator-vddsoc {
 782                                         compatible = "fsl,anatop-regulator";
 783                                         regulator-name = "vddsoc";
 784                                         regulator-min-microvolt = <725000>;
 785                                         regulator-max-microvolt = <1450000>;
 786                                         regulator-always-on;
 787                                         anatop-reg-offset = <0x140>;
 788                                         anatop-vol-bit-shift = <18>;
 789                                         anatop-vol-bit-width = <5>;
 790                                         anatop-delay-reg-offset = <0x170>;
 791                                         anatop-delay-bit-shift = <28>;
 792                                         anatop-delay-bit-width = <2>;
 793                                         anatop-min-bit-val = <1>;
 794                                         anatop-min-voltage = <725000>;
 795                                         anatop-max-voltage = <1450000>;
 796                                 };
 797                         };
 798
 799                         usbphy1: usbphy@20c9000 {
 800                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 801                                 reg = <0x020c9000 0x1000>;
 802                                 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 803                                 clocks = <&clks IMX6QDL_CLK_USBPHY1>;
 804                                 fsl,anatop = <&anatop>;
 805                         };
 806
 807                         usbphy2: usbphy@20ca000 {
 808                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 809                                 reg = <0x020ca000 0x1000>;
 810                                 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 811                                 clocks = <&clks IMX6QDL_CLK_USBPHY2>;
 812                                 fsl,anatop = <&anatop>;
 813                         };
 814
 815                         snvs: snvs@20cc000 {
 816                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 817                                 reg = <0x020cc000 0x4000>;
 818
 819                                 snvs_rtc: snvs-rtc-lp {
 820                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 821                                         regmap = <&snvs>;
 822                                         offset = <0x34>;
 823                                         interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 824                                                      <0 20 IRQ_TYPE_LEVEL_HIGH>;
 825                                 };
 826
 827                                 snvs_poweroff: snvs-poweroff {
 828                                         compatible = "syscon-poweroff";
 829                                         regmap = <&snvs>;
 830                                         offset = <0x38>;
 831                                         value = <0x60>;
 832                                         mask = <0x60>;
 833                                         status = "disabled";
 834                                 };
 835
 836                                 snvs_pwrkey: snvs-powerkey {
 837                                         compatible = "fsl,sec-v4.0-pwrkey";
 838                                         regmap = <&snvs>;
 839                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 840                                         linux,keycode = <KEY_POWER>;
 841                                         wakeup-source;
 842                                         status = "disabled";
 843                                 };
 844
 845                                 snvs_lpgpr: snvs-lpgpr {
 846                                         compatible = "fsl,imx6q-snvs-lpgpr";
 847                                 };
 848                         };
 849
 850                         epit1: epit@20d0000 { /* EPIT1 */
 851                                 reg = <0x020d0000 0x4000>;
 852                                 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 853                         };
 854
 855                         epit2: epit@20d4000 { /* EPIT2 */
 856                                 reg = <0x020d4000 0x4000>;
 857                                 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 858                         };
 859
 860                         src: src@20d8000 {
 861                                 compatible = "fsl,imx6q-src", "fsl,imx51-src";
 862                                 reg = <0x020d8000 0x4000>;
 863                                 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
 864                                              <0 96 IRQ_TYPE_LEVEL_HIGH>;
 865                                 #reset-cells = <1>;
 866                         };
 867
 868                         gpc: gpc@20dc000 {
 869                                 compatible = "fsl,imx6q-gpc";
 870                                 reg = <0x020dc000 0x4000>;
 871                                 interrupt-controller;
 872                                 #interrupt-cells = <3>;
 873                                 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 874                                              <0 90 IRQ_TYPE_LEVEL_HIGH>;
 875                                 interrupt-parent = <&intc>;
 876                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 877                                 clock-names = "ipg";
 878
 879                                 pgc {
 880                                         #address-cells = <1>;
 881                                         #size-cells = <0>;
 882
 883                                         power-domain@0 {
 884                                                 reg = <0>;
 885                                                 #power-domain-cells = <0>;
 886                                         };
 887                                         pd_pu: power-domain@1 {
 888                                                 reg = <1>;
 889                                                 #power-domain-cells = <0>;
 890                                                 power-supply = <&reg_pu>;
 891                                                 clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
 892                                                          <&clks IMX6QDL_CLK_GPU3D_SHADER>,
 893                                                          <&clks IMX6QDL_CLK_GPU2D_CORE>,
 894                                                          <&clks IMX6QDL_CLK_GPU2D_AXI>,
 895                                                          <&clks IMX6QDL_CLK_OPENVG_AXI>,
 896                                                          <&clks IMX6QDL_CLK_VPU_AXI>;
 897                                         };
 898                                 };
 899                         };
 900
 901                         gpr: iomuxc-gpr@20e0000 {
 902                                 compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
 903                                 reg = <0x20e0000 0x38>;
 904
 905                                 mux: mux-controller {
 906                                         compatible = "mmio-mux";
 907                                         #mux-control-cells = <1>;
 908                                 };
 909                         };
 910
 911                         iomuxc: iomuxc@20e0000 {
 912                                 compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
 913                                 reg = <0x20e0000 0x4000>;
 914                         };
 915
 916                         dcic1: dcic@20e4000 {
 917                                 reg = <0x020e4000 0x4000>;
 918                                 interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 919                         };
 920
 921                         dcic2: dcic@20e8000 {
 922                                 reg = <0x020e8000 0x4000>;
 923                                 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 924                         };
 925
 926                         sdma: sdma@20ec000 {
 927                                 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 928                                 reg = <0x020ec000 0x4000>;
 929                                 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 930                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 931                                          <&clks IMX6QDL_CLK_SDMA>;
 932                                 clock-names = "ipg", "ahb";
 933                                 #dma-cells = <3>;
 934                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 935                         };
 936                 };
 937
 938                 aips-bus@2100000 { /* AIPS2 */
 939                         compatible = "fsl,aips-bus", "simple-bus";
 940                         #address-cells = <1>;
 941                         #size-cells = <1>;
 942                         reg = <0x02100000 0x100000>;
 943                         ranges;
 944
 945                         crypto: caam@2100000 {
 946                                 compatible = "fsl,sec-v4.0";
 947                                 #address-cells = <1>;
 948                                 #size-cells = <1>;
 949                                 reg = <0x2100000 0x10000>;
 950                                 ranges = <0 0x2100000 0x10000>;
 951                                 clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
 952                                          <&clks IMX6QDL_CLK_CAAM_ACLK>,
 953                                          <&clks IMX6QDL_CLK_CAAM_IPG>,
 954                                          <&clks IMX6QDL_CLK_EIM_SLOW>;
 955                                 clock-names = "mem", "aclk", "ipg", "emi_slow";
 956
 957                                 sec_jr0: jr0@1000 {
 958                                         compatible = "fsl,sec-v4.0-job-ring";
 959                                         reg = <0x1000 0x1000>;
 960                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 961                                 };
 962
 963                                 sec_jr1: jr1@2000 {
 964                                         compatible = "fsl,sec-v4.0-job-ring";
 965                                         reg = <0x2000 0x1000>;
 966                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 967                                 };
 968                         };
 969
 970                         aipstz@217c000 { /* AIPSTZ2 */
 971                                 reg = <0x0217c000 0x4000>;
 972                         };
 973
 974                         usbotg: usb@2184000 {
 975                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 976                                 reg = <0x02184000 0x200>;
 977                                 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 978                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
 979                                 fsl,usbphy = <&usbphy1>;
 980                                 fsl,usbmisc = <&usbmisc 0>;
 981                                 ahb-burst-config = <0x0>;
 982                                 tx-burst-size-dword = <0x10>;
 983                                 rx-burst-size-dword = <0x10>;
 984                                 status = "disabled";
 985                         };
 986
 987                         usbh1: usb@2184200 {
 988                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 989                                 reg = <0x02184200 0x200>;
 990                                 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 991                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
 992                                 fsl,usbphy = <&usbphy2>;
 993                                 fsl,usbmisc = <&usbmisc 1>;
 994                                 dr_mode = "host";
 995                                 ahb-burst-config = <0x0>;
 996                                 tx-burst-size-dword = <0x10>;
 997                                 rx-burst-size-dword = <0x10>;
 998                                 status = "disabled";
 999                         };
1000
1001                         usbh2: usb@2184400 {
1002                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
1003                                 reg = <0x02184400 0x200>;
1004                                 interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
1005                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
1006                                 fsl,usbphy = <&usbphynop1>;
1007                                 phy_type = "hsic";
1008                                 fsl,usbmisc = <&usbmisc 2>;
1009                                 dr_mode = "host";
1010                                 ahb-burst-config = <0x0>;
1011                                 tx-burst-size-dword = <0x10>;
1012                                 rx-burst-size-dword = <0x10>;
1013                                 status = "disabled";
1014                         };
1015
1016                         usbh3: usb@2184600 {
1017                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
1018                                 reg = <0x02184600 0x200>;
1019                                 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
1020                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
1021                                 fsl,usbphy = <&usbphynop2>;
1022                                 phy_type = "hsic";
1023                                 fsl,usbmisc = <&usbmisc 3>;
1024                                 dr_mode = "host";
1025                                 ahb-burst-config = <0x0>;
1026                                 tx-burst-size-dword = <0x10>;
1027                                 rx-burst-size-dword = <0x10>;
1028                                 status = "disabled";
1029                         };
1030
1031                         usbmisc: usbmisc@2184800 {
1032                                 #index-cells = <1>;
1033                                 compatible = "fsl,imx6q-usbmisc";
1034                                 reg = <0x02184800 0x200>;
1035                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
1036                         };
1037
1038                         fec: ethernet@2188000 {
1039                                 compatible = "fsl,imx6q-fec";
1040                                 reg = <0x02188000 0x4000>;
1041                                 interrupt-names = "int0", "pps";
1042                                 interrupts-extended =
1043                                         <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
1044                                         <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
1045                                 clocks = <&clks IMX6QDL_CLK_ENET>,
1046                                          <&clks IMX6QDL_CLK_ENET>,
1047                                          <&clks IMX6QDL_CLK_ENET_REF>;
1048                                 clock-names = "ipg", "ahb", "ptp";
1049                                 status = "disabled";
1050                         };
1051
1052                         mlb@218c000 {
1053                                 reg = <0x0218c000 0x4000>;
1054                                 interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
1055                                              <0 117 IRQ_TYPE_LEVEL_HIGH>,
1056                                              <0 126 IRQ_TYPE_LEVEL_HIGH>;
1057                         };
1058
1059                         usdhc1: usdhc@2190000 {
1060                                 compatible = "fsl,imx6q-usdhc";
1061                                 reg = <0x02190000 0x4000>;
1062                                 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
1063                                 clocks = <&clks IMX6QDL_CLK_USDHC1>,
1064                                          <&clks IMX6QDL_CLK_USDHC1>,
1065                                          <&clks IMX6QDL_CLK_USDHC1>;
1066                                 clock-names = "ipg", "ahb", "per";
1067                                 bus-width = <4>;
1068                                 status = "disabled";
1069                         };
1070
1071                         usdhc2: usdhc@2194000 {
1072                                 compatible = "fsl,imx6q-usdhc";
1073                                 reg = <0x02194000 0x4000>;
1074                                 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
1075                                 clocks = <&clks IMX6QDL_CLK_USDHC2>,
1076                                          <&clks IMX6QDL_CLK_USDHC2>,
1077                                          <&clks IMX6QDL_CLK_USDHC2>;
1078                                 clock-names = "ipg", "ahb", "per";
1079                                 bus-width = <4>;
1080                                 status = "disabled";
1081                         };
1082
1083                         usdhc3: usdhc@2198000 {
1084                                 compatible = "fsl,imx6q-usdhc";
1085                                 reg = <0x02198000 0x4000>;
1086                                 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
1087                                 clocks = <&clks IMX6QDL_CLK_USDHC3>,
1088                                          <&clks IMX6QDL_CLK_USDHC3>,
1089                                          <&clks IMX6QDL_CLK_USDHC3>;
1090                                 clock-names = "ipg", "ahb", "per";
1091                                 bus-width = <4>;
1092                                 status = "disabled";
1093                         };
1094
1095                         usdhc4: usdhc@219c000 {
1096                                 compatible = "fsl,imx6q-usdhc";
1097                                 reg = <0x0219c000 0x4000>;
1098                                 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
1099                                 clocks = <&clks IMX6QDL_CLK_USDHC4>,
1100                                          <&clks IMX6QDL_CLK_USDHC4>,
1101                                          <&clks IMX6QDL_CLK_USDHC4>;
1102                                 clock-names = "ipg", "ahb", "per";
1103                                 bus-width = <4>;
1104                                 status = "disabled";
1105                         };
1106
1107                         i2c1: i2c@21a0000 {
1108                                 #address-cells = <1>;
1109                                 #size-cells = <0>;
1110                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
1111                                 reg = <0x021a0000 0x4000>;
1112                                 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
1113                                 clocks = <&clks IMX6QDL_CLK_I2C1>;
1114                                 status = "disabled";
1115                         };
1116
1117                         i2c2: i2c@21a4000 {
1118                                 #address-cells = <1>;
1119                                 #size-cells = <0>;
1120                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
1121                                 reg = <0x021a4000 0x4000>;
1122                                 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
1123                                 clocks = <&clks IMX6QDL_CLK_I2C2>;
1124                                 status = "disabled";
1125                         };
1126
1127                         i2c3: i2c@21a8000 {
1128                                 #address-cells = <1>;
1129                                 #size-cells = <0>;
1130                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
1131                                 reg = <0x021a8000 0x4000>;
1132                                 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
1133                                 clocks = <&clks IMX6QDL_CLK_I2C3>;
1134                                 status = "disabled";
1135                         };
1136
1137                         romcp@21ac000 {
1138                                 reg = <0x021ac000 0x4000>;
1139                         };
1140
1141                         mmdc0: memory-controller@21b0000 { /* MMDC0 */
1142                                 compatible = "fsl,imx6q-mmdc";
1143                                 reg = <0x021b0000 0x4000>;
1144                                 clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
1145                         };
1146
1147                         mmdc1: memory-controller@21b4000 { /* MMDC1 */
1148                                 compatible = "fsl,imx6q-mmdc";
1149                                 reg = <0x021b4000 0x4000>;
1150                                 status = "disabled";
1151                         };
1152
1153                         weim: weim@21b8000 {
1154                                 #address-cells = <2>;
1155                                 #size-cells = <1>;
1156                                 compatible = "fsl,imx6q-weim";
1157                                 reg = <0x021b8000 0x4000>;
1158                                 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
1159                                 clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
1160                                 fsl,weim-cs-gpr = <&gpr>;
1161                                 status = "disabled";
1162                         };
1163
1164                         ocotp: ocotp@21bc000 {
1165                                 compatible = "fsl,imx6q-ocotp", "syscon";
1166                                 reg = <0x021bc000 0x4000>;
1167                                 clocks = <&clks IMX6QDL_CLK_IIM>;
1168                         };
1169
1170                         tzasc@21d0000 { /* TZASC1 */
1171                                 reg = <0x021d0000 0x4000>;
1172                                 interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
1173                         };
1174
1175                         tzasc@21d4000 { /* TZASC2 */
1176                                 reg = <0x021d4000 0x4000>;
1177                                 interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
1178                         };
1179
1180                         audmux: audmux@21d8000 {
1181                                 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
1182                                 reg = <0x021d8000 0x4000>;
1183                                 status = "disabled";
1184                         };
1185
1186                         mipi_csi: mipi@21dc000 {
1187                                 compatible = "fsl,imx6-mipi-csi2";
1188                                 reg = <0x021dc000 0x4000>;
1189                                 #address-cells = <1>;
1190                                 #size-cells = <0>;
1191                                 interrupts = <0 100 0x04>, <0 101 0x04>;
1192                                 clocks = <&clks IMX6QDL_CLK_HSI_TX>,
1193                                          <&clks IMX6QDL_CLK_VIDEO_27M>,
1194                                          <&clks IMX6QDL_CLK_EIM_PODF>;
1195                                 clock-names = "dphy", "ref", "pix";
1196                                 status = "disabled";
1197                         };
1198
1199                         mipi_dsi: mipi@21e0000 {
1200                                 reg = <0x021e0000 0x4000>;
1201                                 status = "disabled";
1202
1203                                 ports {
1204                                         #address-cells = <1>;
1205                                         #size-cells = <0>;
1206
1207                                         port@0 {
1208                                                 reg = <0>;
1209
1210                                                 mipi_mux_0: endpoint {
1211                                                         remote-endpoint = <&ipu1_di0_mipi>;
1212                                                 };
1213                                         };
1214
1215                                         port@1 {
1216                                                 reg = <1>;
1217
1218                                                 mipi_mux_1: endpoint {
1219                                                         remote-endpoint = <&ipu1_di1_mipi>;
1220                                                 };
1221                                         };
1222                                 };
1223                         };
1224
1225                         vdoa@21e4000 {
1226                                 compatible = "fsl,imx6q-vdoa";
1227                                 reg = <0x021e4000 0x4000>;
1228                                 interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
1229                                 clocks = <&clks IMX6QDL_CLK_VDOA>;
1230                         };
1231
1232                         uart2: serial@21e8000 {
1233                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1234                                 reg = <0x021e8000 0x4000>;
1235                                 interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
1236                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1237                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1238                                 clock-names = "ipg", "per";
1239                                 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1240                                 dma-names = "rx", "tx";
1241                                 status = "disabled";
1242                         };
1243
1244                         uart3: serial@21ec000 {
1245                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1246                                 reg = <0x021ec000 0x4000>;
1247                                 interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
1248                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1249                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1250                                 clock-names = "ipg", "per";
1251                                 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1252                                 dma-names = "rx", "tx";
1253                                 status = "disabled";
1254                         };
1255
1256                         uart4: serial@21f0000 {
1257                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1258                                 reg = <0x021f0000 0x4000>;
1259                                 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
1260                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1261                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1262                                 clock-names = "ipg", "per";
1263                                 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1264                                 dma-names = "rx", "tx";
1265                                 status = "disabled";
1266                         };
1267
1268                         uart5: serial@21f4000 {
1269                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1270                                 reg = <0x021f4000 0x4000>;
1271                                 interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
1272                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1273                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1274                                 clock-names = "ipg", "per";
1275                                 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1276                                 dma-names = "rx", "tx";
1277                                 status = "disabled";
1278                         };
1279                 };
1280
1281                 ipu1: ipu@2400000 {
1282                         #address-cells = <1>;
1283                         #size-cells = <0>;
1284                         compatible = "fsl,imx6q-ipu";
1285                         reg = <0x02400000 0x400000>;
1286                         interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
1287                                      <0 5 IRQ_TYPE_LEVEL_HIGH>;
1288                         clocks = <&clks IMX6QDL_CLK_IPU1>,
1289                                  <&clks IMX6QDL_CLK_IPU1_DI0>,
1290                                  <&clks IMX6QDL_CLK_IPU1_DI1>;
1291                         clock-names = "bus", "di0", "di1";
1292                         resets = <&src 2>;
1293
1294                         ipu1_csi0: port@0 {
1295                                 reg = <0>;
1296
1297                                 ipu1_csi0_from_ipu1_csi0_mux: endpoint {
1298                                         remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
1299                                 };
1300                         };
1301
1302                         ipu1_csi1: port@1 {
1303                                 reg = <1>;
1304                         };
1305
1306                         ipu1_di0: port@2 {
1307                                 #address-cells = <1>;
1308                                 #size-cells = <0>;
1309                                 reg = <2>;
1310
1311                                 ipu1_di0_disp0: endpoint@0 {
1312                                         reg = <0>;
1313                                 };
1314
1315                                 ipu1_di0_hdmi: endpoint@1 {
1316                                         reg = <1>;
1317                                         remote-endpoint = <&hdmi_mux_0>;
1318                                 };
1319
1320                                 ipu1_di0_mipi: endpoint@2 {
1321                                         reg = <2>;
1322                                         remote-endpoint = <&mipi_mux_0>;
1323                                 };
1324
1325                                 ipu1_di0_lvds0: endpoint@3 {
1326                                         reg = <3>;
1327                                         remote-endpoint = <&lvds0_mux_0>;
1328                                 };
1329
1330                                 ipu1_di0_lvds1: endpoint@4 {
1331                                         reg = <4>;
1332                                         remote-endpoint = <&lvds1_mux_0>;
1333                                 };
1334                         };
1335
1336                         ipu1_di1: port@3 {
1337                                 #address-cells = <1>;
1338                                 #size-cells = <0>;
1339                                 reg = <3>;
1340
1341                                 ipu1_di1_disp1: endpoint@0 {
1342                                         reg = <0>;
1343                                 };
1344
1345                                 ipu1_di1_hdmi: endpoint@1 {
1346                                         reg = <1>;
1347                                         remote-endpoint = <&hdmi_mux_1>;
1348                                 };
1349
1350                                 ipu1_di1_mipi: endpoint@2 {
1351                                         reg = <2>;
1352                                         remote-endpoint = <&mipi_mux_1>;
1353                                 };
1354
1355                                 ipu1_di1_lvds0: endpoint@3 {
1356                                         reg = <3>;
1357                                         remote-endpoint = <&lvds0_mux_1>;
1358                                 };
1359
1360                                 ipu1_di1_lvds1: endpoint@4 {
1361                                         reg = <4>;
1362                                         remote-endpoint = <&lvds1_mux_1>;
1363                                 };
1364                         };
1365                 };
1366         };
1367 };