arch/arm/boot/dts/imx6qdl-tx6.dtsi

   1 /*
   2  * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License
  11  *     version 2 as published by the Free Software Foundation.
  12  *
  13  *     This file is distributed in the hope that it will be useful,
  14  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *     GNU General Public License for more details.
  17  *
  18  * Or, alternatively,
  19  *
  20  *  b) Permission is hereby granted, free of charge, to any person
  21  *     obtaining a copy of this software and associated documentation
  22  *     files (the "Software"), to deal in the Software without
  23  *     restriction, including without limitation the rights to use,
  24  *     copy, modify, merge, publish, distribute, sublicense, and/or
  25  *     sell copies of the Software, and to permit persons to whom the
  26  *     Software is furnished to do so, subject to the following
  27  *     conditions:
  28  *
  29  *     The above copyright notice and this permission notice shall be
  30  *     included in all copies or substantial portions of the Software.
  31  *
  32  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  33  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  34  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  35  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  36  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  37  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  38  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  39  *     OTHER DEALINGS IN THE SOFTWARE.
  40  */
  41
  42 #include <dt-bindings/gpio/gpio.h>
  43 #include <dt-bindings/input/input.h>
  44 #include <dt-bindings/interrupt-controller/irq.h>
  45 #include <dt-bindings/pwm/pwm.h>
  46
  47 / {
  48         aliases {
  49                 can0 = &can2;
  50                 can1 = &can1;
  51                 ethernet0 = &fec;
  52                 lcdif_23bit_pins_a = &pinctrl_disp0_1;
  53                 lcdif_24bit_pins_a = &pinctrl_disp0_2;
  54                 pwm0 = &pwm1;
  55                 pwm1 = &pwm2;
  56                 reg_can_xcvr = &reg_can_xcvr;
  57                 stk5led = &user_led;
  58                 usbotg = &usbotg;
  59                 sdhc0 = &usdhc1;
  60                 sdhc1 = &usdhc2;
  61         };
  62
  63         memory {
  64                 reg = <0 0>; /* will be filled by U-Boot */
  65         };
  66
  67         clocks {
  68                 #address-cells = <1>;
  69                 #size-cells = <0>;
  70
  71                 mclk: clock@0 {
  72                         compatible = "fixed-clock";
  73                         reg = <0>;
  74                         #clock-cells = <0>;
  75                         clock-frequency = <26000000>;
  76                 };
  77         };
  78
  79         gpio-keys {
  80                 compatible = "gpio-keys";
  81
  82                 power {
  83                         label = "Power Button";
  84                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
  85                         linux,code = <KEY_POWER>;
  86                         wakeup-source;
  87                 };
  88         };
  89
  90         leds {
  91                 compatible = "gpio-leds";
  92
  93                 user_led: user {
  94                         label = "Heartbeat";
  95                         pinctrl-names = "default";
  96                         pinctrl-0 = <&pinctrl_user_led>;
  97                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
  98                         linux,default-trigger = "heartbeat";
  99                 };
 100         };
 101
 102         reg_3v3_etn: regulator-3v3-etn {
 103                 compatible = "regulator-fixed";
 104                 regulator-name = "3V3_ETN";
 105                 regulator-min-microvolt = <3300000>;
 106                 regulator-max-microvolt = <3300000>;
 107                 pinctrl-names = "default";
 108                 pinctrl-0 = <&pinctrl_etnphy_power>;
 109                 gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 110                 enable-active-high;
 111         };
 112
 113         reg_2v5: regulator-2v5 {
 114                 compatible = "regulator-fixed";
 115                 regulator-name = "2V5";
 116                 regulator-min-microvolt = <2500000>;
 117                 regulator-max-microvolt = <2500000>;
 118                 regulator-always-on;
 119         };
 120
 121         reg_3v3: regulator-3v3 {
 122                 compatible = "regulator-fixed";
 123                 regulator-name = "3V3";
 124                 regulator-min-microvolt = <3300000>;
 125                 regulator-max-microvolt = <3300000>;
 126                 regulator-always-on;
 127         };
 128
 129         reg_can_xcvr: regulator-can-xcvr {
 130                 compatible = "regulator-fixed";
 131                 regulator-name = "CAN XCVR";
 132                 regulator-min-microvolt = <3300000>;
 133                 regulator-max-microvolt = <3300000>;
 134                 pinctrl-names = "default";
 135                 pinctrl-0 = <&pinctrl_flexcan_xcvr>;
 136                 gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
 137         };
 138
 139         reg_lcd0_pwr: regulator-lcd0-pwr {
 140                 compatible = "regulator-fixed";
 141                 regulator-name = "LCD0 POWER";
 142                 regulator-min-microvolt = <3300000>;
 143                 regulator-max-microvolt = <3300000>;
 144                 pinctrl-names = "default";
 145                 pinctrl-0 = <&pinctrl_lcd0_pwr>;
 146                 gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 147                 enable-active-high;
 148                 regulator-boot-on;
 149         };
 150
 151         reg_lcd1_pwr: regulator-lcd1-pwr {
 152                 compatible = "regulator-fixed";
 153                 regulator-name = "LCD1 POWER";
 154                 regulator-min-microvolt = <3300000>;
 155                 regulator-max-microvolt = <3300000>;
 156                 pinctrl-names = "default";
 157                 pinctrl-0 = <&pinctrl_lcd1_pwr>;
 158                 gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
 159                 enable-active-high;
 160                 regulator-boot-on;
 161         };
 162
 163         reg_usbh1_vbus: regulator-usbh1-vbus {
 164                 compatible = "regulator-fixed";
 165                 regulator-name = "usbh1_vbus";
 166                 regulator-min-microvolt = <5000000>;
 167                 regulator-max-microvolt = <5000000>;
 168                 pinctrl-names = "default";
 169                 pinctrl-0 = <&pinctrl_usbh1_vbus>;
 170                 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
 171                 enable-active-high;
 172         };
 173
 174         reg_usbotg_vbus: regulator-usbotg-vbus {
 175                 compatible = "regulator-fixed";
 176                 regulator-name = "usbotg_vbus";
 177                 regulator-min-microvolt = <5000000>;
 178                 regulator-max-microvolt = <5000000>;
 179                 pinctrl-names = "default";
 180                 pinctrl-0 = <&pinctrl_usbotg_vbus>;
 181                 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 182                 enable-active-high;
 183         };
 184
 185         sound {
 186                 compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
 187                              "fsl,imx-audio-sgtl5000";
 188                 model = "sgtl5000-audio";
 189                 pinctrl-names = "default";
 190                 pinctrl-0 = <&pinctrl_audmux>;
 191                 ssi-controller = <&ssi1>;
 192                 audio-codec = <&sgtl5000>;
 193                 audio-routing =
 194                         "MIC_IN", "Mic Jack",
 195                         "Mic Jack", "Mic Bias",
 196                         "Headphone Jack", "HP_OUT";
 197                 mux-int-port = <1>;
 198                 mux-ext-port = <5>;
 199         };
 200 };
 201
 202 &audmux {
 203         status = "okay";
 204 };
 205
 206 &can1 {
 207         pinctrl-names = "default";
 208         pinctrl-0 = <&pinctrl_flexcan1>;
 209         xceiver-supply = <&reg_can_xcvr>;
 210         status = "okay";
 211 };
 212
 213 &can2 {
 214         pinctrl-names = "default";
 215         pinctrl-0 = <&pinctrl_flexcan2>;
 216         xceiver-supply = <&reg_can_xcvr>;
 217         status = "okay";
 218 };
 219
 220 &ecspi1 {
 221         pinctrl-names = "default";
 222         pinctrl-0 = <&pinctrl_ecspi1>;
 223         cs-gpios = <
 224                 &gpio2 30 GPIO_ACTIVE_HIGH
 225                 &gpio3 19 GPIO_ACTIVE_HIGH
 226         >;
 227         status = "disabled";
 228
 229         spidev0: spi@0 {
 230                 compatible = "spidev";
 231                 reg = <0>;
 232                 spi-max-frequency = <54000000>;
 233         };
 234
 235         spidev1: spi@1 {
 236                 compatible = "spidev";
 237                 reg = <1>;
 238                 spi-max-frequency = <54000000>;
 239         };
 240 };
 241
 242 &fec {
 243         pinctrl-names = "default";
 244         pinctrl-0 = <&pinctrl_enet>;
 245         clocks = <&clks IMX6QDL_CLK_ENET>,
 246                  <&clks IMX6QDL_CLK_ENET>,
 247                  <&clks IMX6QDL_CLK_ENET_REF>,
 248                  <&clks IMX6QDL_CLK_ENET_REF>;
 249         clock-names = "ipg", "ahb", "ptp", "enet_out";
 250         phy-mode = "rmii";
 251         phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 252         phy-handle = <&etnphy>;
 253         phy-supply = <&reg_3v3_etn>;
 254         status = "okay";
 255
 256         mdio {
 257                 #address-cells = <1>;
 258                 #size-cells = <0>;
 259
 260                 etnphy: ethernet-phy@0 {
 261                         compatible = "ethernet-phy-ieee802.3-c22";
 262                         reg = <0>;
 263                         pinctrl-names = "default";
 264                         pinctrl-0 = <&pinctrl_enet_mdio>;
 265                         interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>;
 266                 };
 267         };
 268 };
 269
 270 &gpmi {
 271         pinctrl-names = "default";
 272         pinctrl-0 = <&pinctrl_gpmi_nand>;
 273         nand-on-flash-bbt;
 274         fsl,no-blockmark-swap;
 275         status = "okay";
 276 };
 277
 278 &i2c1 {
 279         pinctrl-names = "default";
 280         pinctrl-0 = <&pinctrl_i2c1>;
 281         clock-frequency = <400000>;
 282         status = "okay";
 283
 284         ds1339: rtc@68 {
 285                 compatible = "dallas,ds1339";
 286                 reg = <0x68>;
 287         };
 288 };
 289
 290 &i2c3 {
 291         pinctrl-names = "default";
 292         pinctrl-0 = <&pinctrl_i2c3>;
 293         clock-frequency = <400000>;
 294         status = "okay";
 295
 296         sgtl5000: sgtl5000@0a {
 297                 compatible = "fsl,sgtl5000";
 298                 reg = <0x0a>;
 299                 VDDA-supply = <&reg_2v5>;
 300                 VDDIO-supply = <&reg_3v3>;
 301                 clocks = <&mclk>;
 302         };
 303
 304         polytouch: edt-ft5x06@38 {
 305                 compatible = "edt,edt-ft5x06";
 306                 reg = <0x38>;
 307                 pinctrl-names = "default";
 308                 pinctrl-0 = <&pinctrl_edt_ft5x06>;
 309                 interrupt-parent = <&gpio6>;
 310                 interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 311                 reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 312                 wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 313                 wakeup-source;
 314         };
 315
 316         touchscreen: tsc2007@48 {
 317                 compatible = "ti,tsc2007";
 318                 reg = <0x48>;
 319                 pinctrl-names = "default";
 320                 pinctrl-0 = <&pinctrl_tsc2007>;
 321                 interrupt-parent = <&gpio3>;
 322                 interrupts = <26 0>;
 323                 gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 324                 ti,x-plate-ohms = <660>;
 325                 wakeup-source;
 326         };
 327 };
 328
 329 &iomuxc {
 330         pinctrl-names = "default";
 331         pinctrl-0 = <&pinctrl_hog>;
 332
 333         pinctrl_hog: hoggrp {
 334                 fsl,pins = <
 335                         MX6QDL_PAD_SD3_DAT2__GPIO7_IO06         0x1b0b1 /* ETN PHY RESET */
 336                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1b0b1 /* ETN PHY INT */
 337                         MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b1 /* PWR BTN */
 338                 >;
 339         };
 340
 341         pinctrl_audmux: audmuxgrp {
 342                 fsl,pins = <
 343                         MX6QDL_PAD_KEY_ROW1__AUD5_RXD           0x130b0 /* SSI1_RXD */
 344                         MX6QDL_PAD_KEY_ROW0__AUD5_TXD           0x110b0 /* SSI1_TXD */
 345                         MX6QDL_PAD_KEY_COL0__AUD5_TXC           0x130b0 /* SSI1_CLK */
 346                         MX6QDL_PAD_KEY_COL1__AUD5_TXFS          0x130b0 /* SSI1_FS */
 347                 >;
 348         };
 349
 350         pinctrl_disp0_1: disp0grp-1 {
 351                 fsl,pins = <
 352                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 353                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
 354                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
 355                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
 356                         /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
 357                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
 358                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
 359                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
 360                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
 361                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
 362                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
 363                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
 364                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
 365                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
 366                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
 367                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
 368                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
 369                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
 370                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
 371                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
 372                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
 373                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
 374                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
 375                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
 376                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
 377                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
 378                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
 379                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
 380                 >;
 381         };
 382
 383         pinctrl_disp0_2: disp0grp-2 {
 384                 fsl,pins = <
 385                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 386                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
 387                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
 388                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
 389                         MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
 390                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
 391                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
 392                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
 393                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
 394                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
 395                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
 396                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
 397                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
 398                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
 399                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
 400                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
 401                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
 402                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
 403                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
 404                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
 405                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
 406                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
 407                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
 408                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
 409                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
 410                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
 411                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
 412                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
 413                 >;
 414         };
 415
 416         pinctrl_ecspi1: ecspi1grp {
 417                 fsl,pins = <
 418                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x0b0b0
 419                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x0b0b0
 420                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x0b0b0
 421                         MX6QDL_PAD_GPIO_19__ECSPI1_RDY          0x0b0b0
 422                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x0b0b0 /* SPI CS0 */
 423                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x0b0b0 /* SPI CS1 */
 424                 >;
 425         };
 426
 427         pinctrl_edt_ft5x06: edt-ft5x06grp {
 428                 fsl,pins = <
 429                         MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x1b0b0 /* Interrupt */
 430                         MX6QDL_PAD_EIM_A16__GPIO2_IO22          0x1b0b0 /* Reset */
 431                         MX6QDL_PAD_EIM_A17__GPIO2_IO21          0x1b0b0 /* Wake */
 432                 >;
 433         };
 434
 435         pinctrl_enet: enetgrp {
 436                 fsl,pins = <
 437                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
 438                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
 439                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
 440                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 441                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
 442                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
 443                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
 444                 >;
 445         };
 446
 447         pinctrl_enet_mdio: enet-mdiogrp {
 448                 fsl,pins = <
 449                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 450                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 451                 >;
 452         };
 453
 454         pinctrl_etnphy_power: etnphy-pwrgrp {
 455                 fsl,pins = <
 456                         MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b1 /* ETN PHY POWER */
 457                 >;
 458         };
 459
 460         pinctrl_flexcan1: flexcan1grp {
 461                 fsl,pins = <
 462                         MX6QDL_PAD_GPIO_7__FLEXCAN1_TX          0x1b0b0
 463                         MX6QDL_PAD_GPIO_8__FLEXCAN1_RX          0x1b0b0
 464                 >;
 465         };
 466
 467         pinctrl_flexcan2: flexcan2grp {
 468                 fsl,pins = <
 469                         MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
 470                         MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
 471                 >;
 472         };
 473
 474         pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
 475                 fsl,pins = <
 476                         MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21       0x1b0b0 /* Flexcan XCVR enable */
 477                 >;
 478         };
 479
 480         pinctrl_gpmi_nand: gpminandgrp {
 481                 fsl,pins = <
 482                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0x0b0b1
 483                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0x0b0b1
 484                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0x0b0b1
 485                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0x0b000
 486                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0x0b0b1
 487                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0x0b0b1
 488                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0x0b0b1
 489                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0x0b0b1
 490                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0x0b0b1
 491                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0x0b0b1
 492                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0x0b0b1
 493                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0x0b0b1
 494                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0x0b0b1
 495                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0x0b0b1
 496                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0x0b0b1
 497                 >;
 498         };
 499
 500         pinctrl_i2c1: i2c1grp {
 501                 fsl,pins = <
 502                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 503                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 504                 >;
 505         };
 506
 507         pinctrl_i2c3: i2c3grp {
 508                 fsl,pins = <
 509                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 510                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 511                 >;
 512         };
 513
 514         pinctrl_kpp: kppgrp {
 515                 fsl,pins = <
 516                         MX6QDL_PAD_GPIO_9__KEY_COL6             0x1b0b1
 517                         MX6QDL_PAD_GPIO_4__KEY_COL7             0x1b0b1
 518                         MX6QDL_PAD_KEY_COL2__KEY_COL2           0x1b0b1
 519                         MX6QDL_PAD_KEY_COL3__KEY_COL3           0x1b0b1
 520                         MX6QDL_PAD_GPIO_2__KEY_ROW6             0x1b0b1
 521                         MX6QDL_PAD_GPIO_5__KEY_ROW7             0x1b0b1
 522                         MX6QDL_PAD_KEY_ROW2__KEY_ROW2           0x1b0b1
 523                         MX6QDL_PAD_KEY_ROW3__KEY_ROW3           0x1b0b1
 524                 >;
 525         };
 526
 527         pinctrl_lcd0_pwr: lcd0-pwrgrp {
 528                 fsl,pins = <
 529                         MX6QDL_PAD_EIM_D29__GPIO3_IO29          0x1b0b1 /* LCD Reset */
 530                 >;
 531         };
 532
 533         pinctrl_lcd1_pwr: lcd-pwrgrp {
 534                 fsl,pins = <
 535                         MX6QDL_PAD_EIM_EB3__GPIO2_IO31          0x1b0b1 /* LCD Power Enable */
 536                 >;
 537         };
 538
 539         pinctrl_pwm1: pwm1grp {
 540                 fsl,pins = <
 541                         MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b1
 542                 >;
 543         };
 544
 545         pinctrl_pwm2: pwm2grp {
 546                 fsl,pins = <
 547                         MX6QDL_PAD_GPIO_1__PWM2_OUT             0x1b0b1
 548                 >;
 549         };
 550
 551         pinctrl_tsc2007: tsc2007grp {
 552                 fsl,pins = <
 553                         MX6QDL_PAD_EIM_D26__GPIO3_IO26          0x1b0b0 /* Interrupt */
 554                 >;
 555         };
 556
 557         pinctrl_uart1: uart1grp {
 558                 fsl,pins = <
 559                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 560                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 561                 >;
 562         };
 563
 564         pinctrl_uart1_rtscts: uart1_rtsctsgrp {
 565                 fsl,pins = <
 566                         MX6QDL_PAD_SD3_DAT1__UART1_RTS_B        0x1b0b1
 567                         MX6QDL_PAD_SD3_DAT0__UART1_CTS_B        0x1b0b1
 568                 >;
 569         };
 570
 571         pinctrl_uart2: uart2grp {
 572                 fsl,pins = <
 573                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 574                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 575                 >;
 576         };
 577
 578         pinctrl_uart2_rtscts: uart2_rtsctsgrp {
 579                 fsl,pins = <
 580                         MX6QDL_PAD_SD4_DAT5__UART2_RTS_B        0x1b0b1
 581                         MX6QDL_PAD_SD4_DAT6__UART2_CTS_B        0x1b0b1
 582                 >;
 583         };
 584
 585         pinctrl_uart3: uart3grp {
 586                 fsl,pins = <
 587                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 588                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 589                 >;
 590         };
 591
 592         pinctrl_uart3_rtscts: uart3_rtsctsgrp {
 593                 fsl,pins = <
 594                         MX6QDL_PAD_SD3_DAT3__UART3_CTS_B        0x1b0b1
 595                         MX6QDL_PAD_SD3_RST__UART3_RTS_B         0x1b0b1
 596                 >;
 597         };
 598
 599         pinctrl_usbh1_vbus: usbh1-vbusgrp {
 600                 fsl,pins = <
 601                         MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x1b0b0 /* USBH1_VBUSEN */
 602                 >;
 603         };
 604
 605         pinctrl_usbotg: usbotggrp {
 606                 fsl,pins = <
 607                         MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x17059
 608                 >;
 609         };
 610
 611         pinctrl_usbotg_vbus: usbotg-vbusgrp {
 612                 fsl,pins = <
 613                         MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x1b0b0 /* USBOTG_VBUSEN */
 614                 >;
 615         };
 616
 617         pinctrl_usdhc1: usdhc1grp {
 618                 fsl,pins = <
 619                         MX6QDL_PAD_SD1_CMD__SD1_CMD             0x070b1
 620                         MX6QDL_PAD_SD1_CLK__SD1_CLK             0x070b1
 621                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x070b1
 622                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x070b1
 623                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x070b1
 624                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x070b1
 625                         MX6QDL_PAD_SD3_CMD__GPIO7_IO02          0x170b0 /* SD1 CD */
 626                 >;
 627         };
 628
 629         pinctrl_usdhc2: usdhc2grp {
 630                 fsl,pins = <
 631                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x070b1
 632                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x070b1
 633                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x070b1
 634                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x070b1
 635                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x070b1
 636                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x070b1
 637                         MX6QDL_PAD_SD3_CLK__GPIO7_IO03          0x170b0 /* SD2 CD */
 638                 >;
 639         };
 640
 641         pinctrl_user_led: user-ledgrp {
 642                 fsl,pins = <
 643                         MX6QDL_PAD_EIM_A18__GPIO2_IO20          0x1b0b1 /* LED */
 644                 >;
 645         };
 646 };
 647
 648 &kpp {
 649         pinctrl-names = "default";
 650         pinctrl-0 = <&pinctrl_kpp>;
 651         /* sample keymap */
 652         /* row/col 0,1 are mapped to KPP row/col 6,7 */
 653         linux,keymap = <
 654                 MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
 655                 MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
 656                 MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
 657                 MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
 658                 MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
 659                 MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
 660                 MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
 661                 MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
 662                 MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
 663                 MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
 664                 MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
 665         >;
 666         status = "okay";
 667 };
 668
 669 &pwm1 {
 670         pinctrl-names = "default";
 671         pinctrl-0 = <&pinctrl_pwm1>;
 672         #pwm-cells = <3>;
 673         status = "disabled";
 674 };
 675
 676 &pwm2 {
 677         pinctrl-names = "default";
 678         pinctrl-0 = <&pinctrl_pwm2>;
 679         #pwm-cells = <3>;
 680         status = "okay";
 681 };
 682
 683 &ssi1 {
 684         status = "okay";
 685 };
 686
 687 &uart1 {
 688         pinctrl-names = "default";
 689         pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
 690         uart-has-rtscts;
 691         status = "okay";
 692 };
 693
 694 &uart2 {
 695         pinctrl-names = "default";
 696         pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
 697         uart-has-rtscts;
 698         status = "okay";
 699 };
 700
 701 &uart3 {
 702         pinctrl-names = "default";
 703         pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
 704         uart-has-rtscts;
 705         status = "okay";
 706 };
 707
 708 &usbh1 {
 709         vbus-supply = <&reg_usbh1_vbus>;
 710         dr_mode = "host";
 711         disable-over-current;
 712         status = "okay";
 713 };
 714
 715 &usbotg {
 716         vbus-supply = <&reg_usbotg_vbus>;
 717         pinctrl-names = "default";
 718         pinctrl-0 = <&pinctrl_usbotg>;
 719         dr_mode = "peripheral";
 720         disable-over-current;
 721         status = "okay";
 722 };
 723
 724 &usdhc1 {
 725         pinctrl-names = "default";
 726         pinctrl-0 = <&pinctrl_usdhc1>;
 727         bus-width = <4>;
 728         no-1-8-v;
 729         cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 730         fsl,wp-controller;
 731         status = "okay";
 732 };
 733
 734 &usdhc2 {
 735         pinctrl-names = "default";
 736         pinctrl-0 = <&pinctrl_usdhc2>;
 737         bus-width = <4>;
 738         no-1-8-v;
 739         cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 740         fsl,wp-controller;
 741         status = "okay";
 742 };