arch/arm/boot/dts/imx6qdl-gw53xx.dtsi

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         /* these are used by bootloader for disabling nodes */
  16         aliases {
  17                 led0 = &led0;
  18                 led1 = &led1;
  19                 led2 = &led2;
  20                 nand = &gpmi;
  21                 ssi0 = &ssi1;
  22                 usb0 = &usbh1;
  23                 usb1 = &usbotg;
  24         };
  25
  26         chosen {
  27                 bootargs = "console=ttymxc1,115200";
  28         };
  29
  30         backlight {
  31                 compatible = "pwm-backlight";
  32                 pwms = <&pwm4 0 5000000>;
  33                 brightness-levels = <0 4 8 16 32 64 128 255>;
  34                 default-brightness-level = <7>;
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39                 pinctrl-names = "default";
  40                 pinctrl-0 = <&pinctrl_gpio_leds>;
  41
  42                 led0: user1 {
  43                         label = "user1";
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  45                         default-state = "on";
  46                         linux,default-trigger = "heartbeat";
  47                 };
  48
  49                 led1: user2 {
  50                         label = "user2";
  51                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  52                         default-state = "off";
  53                 };
  54
  55                 led2: user3 {
  56                         label = "user3";
  57                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  58                         default-state = "off";
  59                 };
  60         };
  61
  62         memory {
  63                 reg = <0x10000000 0x40000000>;
  64         };
  65
  66         pps {
  67                 compatible = "pps-gpio";
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&pinctrl_pps>;
  70                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  71                 status = "okay";
  72         };
  73
  74         reg_1p0v: regulator-1p0v {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "1P0V";
  77                 regulator-min-microvolt = <1000000>;
  78                 regulator-max-microvolt = <1000000>;
  79                 regulator-always-on;
  80         };
  81
  82         reg_3p3v: regulator-3p3v {
  83                 compatible = "regulator-fixed";
  84                 regulator-name = "3P3V";
  85                 regulator-min-microvolt = <3300000>;
  86                 regulator-max-microvolt = <3300000>;
  87                 regulator-always-on;
  88         };
  89
  90         reg_usb_h1_vbus: regulator-usb-h1-vbus {
  91                 compatible = "regulator-fixed";
  92                 regulator-name = "usb_h1_vbus";
  93                 regulator-min-microvolt = <5000000>;
  94                 regulator-max-microvolt = <5000000>;
  95                 regulator-always-on;
  96         };
  97
  98         reg_usb_otg_vbus: regulator-usb-otg-vbus {
  99                 compatible = "regulator-fixed";
 100                 regulator-name = "usb_otg_vbus";
 101                 regulator-min-microvolt = <5000000>;
 102                 regulator-max-microvolt = <5000000>;
 103                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 104                 enable-active-high;
 105         };
 106
 107         sound {
 108                 compatible = "fsl,imx6q-ventana-sgtl5000",
 109                              "fsl,imx-audio-sgtl5000";
 110                 model = "sgtl5000-audio";
 111                 ssi-controller = <&ssi1>;
 112                 audio-codec = <&codec>;
 113                 audio-routing =
 114                         "MIC_IN", "Mic Jack",
 115                         "Mic Jack", "Mic Bias",
 116                         "Headphone Jack", "HP_OUT";
 117                 mux-int-port = <1>;
 118                 mux-ext-port = <4>;
 119         };
 120 };
 121
 122 &audmux {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_audmux>;
 125         status = "okay";
 126 };
 127
 128 &can1 {
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&pinctrl_flexcan1>;
 131         status = "okay";
 132 };
 133
 134 &clks {
 135         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 136                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 137         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 138                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 139 };
 140
 141 &fec {
 142         pinctrl-names = "default";
 143         pinctrl-0 = <&pinctrl_enet>;
 144         phy-mode = "rgmii-id";
 145         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 146         status = "okay";
 147 };
 148
 149 &gpmi {
 150         pinctrl-names = "default";
 151         pinctrl-0 = <&pinctrl_gpmi_nand>;
 152         status = "okay";
 153 };
 154
 155 &hdmi {
 156         ddc-i2c-bus = <&i2c3>;
 157         status = "okay";
 158 };
 159
 160 &i2c1 {
 161         clock-frequency = <100000>;
 162         pinctrl-names = "default";
 163         pinctrl-0 = <&pinctrl_i2c1>;
 164         status = "okay";
 165
 166         eeprom1: eeprom@50 {
 167                 compatible = "atmel,24c02";
 168                 reg = <0x50>;
 169                 pagesize = <16>;
 170         };
 171
 172         eeprom2: eeprom@51 {
 173                 compatible = "atmel,24c02";
 174                 reg = <0x51>;
 175                 pagesize = <16>;
 176         };
 177
 178         eeprom3: eeprom@52 {
 179                 compatible = "atmel,24c02";
 180                 reg = <0x52>;
 181                 pagesize = <16>;
 182         };
 183
 184         eeprom4: eeprom@53 {
 185                 compatible = "atmel,24c02";
 186                 reg = <0x53>;
 187                 pagesize = <16>;
 188         };
 189
 190         gpio: pca9555@23 {
 191                 compatible = "nxp,pca9555";
 192                 reg = <0x23>;
 193                 gpio-controller;
 194                 #gpio-cells = <2>;
 195         };
 196
 197         rtc: ds1672@68 {
 198                 compatible = "dallas,ds1672";
 199                 reg = <0x68>;
 200         };
 201 };
 202
 203 &i2c2 {
 204         clock-frequency = <100000>;
 205         pinctrl-names = "default";
 206         pinctrl-0 = <&pinctrl_i2c2>;
 207         status = "okay";
 208
 209         ltc3676: pmic@3c {
 210                 compatible = "lltc,ltc3676";
 211                 reg = <0x3c>;
 212                 interrupt-parent = <&gpio1>;
 213                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 214
 215                 regulators {
 216                         /* VDD_SOC (1+R1/R2 = 1.635) */
 217                         reg_vdd_soc: sw1 {
 218                                 regulator-name = "vddsoc";
 219                                 regulator-min-microvolt = <674400>;
 220                                 regulator-max-microvolt = <1308000>;
 221                                 lltc,fb-voltage-divider = <127000 200000>;
 222                                 regulator-ramp-delay = <7000>;
 223                                 regulator-boot-on;
 224                                 regulator-always-on;
 225                         };
 226
 227                         /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 228                         reg_1p8v: sw2 {
 229                                 regulator-name = "vdd1p8";
 230                                 regulator-min-microvolt = <1033310>;
 231                                 regulator-max-microvolt = <2004000>;
 232                                 lltc,fb-voltage-divider = <301000 200000>;
 233                                 regulator-ramp-delay = <7000>;
 234                                 regulator-boot-on;
 235                                 regulator-always-on;
 236                         };
 237
 238                         /* VDD_ARM (1+R1/R2 = 1.635) */
 239                         reg_vdd_arm: sw3 {
 240                                 regulator-name = "vddarm";
 241                                 regulator-min-microvolt = <674400>;
 242                                 regulator-max-microvolt = <1308000>;
 243                                 lltc,fb-voltage-divider = <127000 200000>;
 244                                 regulator-ramp-delay = <7000>;
 245                                 regulator-boot-on;
 246                                 regulator-always-on;
 247                         };
 248
 249                         /* VDD_DDR (1+R1/R2 = 2.105) */
 250                         reg_vdd_ddr: sw4 {
 251                                 regulator-name = "vddddr";
 252                                 regulator-min-microvolt = <868310>;
 253                                 regulator-max-microvolt = <1684000>;
 254                                 lltc,fb-voltage-divider = <221000 200000>;
 255                                 regulator-ramp-delay = <7000>;
 256                                 regulator-boot-on;
 257                                 regulator-always-on;
 258                         };
 259
 260                         /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
 261                         reg_2p5v: ldo2 {
 262                                 regulator-name = "vdd2p5";
 263                                 regulator-min-microvolt = <2490375>;
 264                                 regulator-max-microvolt = <2490375>;
 265                                 lltc,fb-voltage-divider = <487000 200000>;
 266                                 regulator-boot-on;
 267                                 regulator-always-on;
 268                         };
 269
 270                         /* VDD_AUD_1P8: Audio codec */
 271                         reg_aud_1p8v: ldo3 {
 272                                 regulator-name = "vdd1p8a";
 273                                 regulator-min-microvolt = <1800000>;
 274                                 regulator-max-microvolt = <1800000>;
 275                                 regulator-boot-on;
 276                         };
 277
 278                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 279                         reg_3p0v: ldo4 {
 280                                 regulator-name = "vdd3p0";
 281                                 regulator-min-microvolt = <3023250>;
 282                                 regulator-max-microvolt = <3023250>;
 283                                 lltc,fb-voltage-divider = <634000 200000>;
 284                                 regulator-boot-on;
 285                                 regulator-always-on;
 286                         };
 287                 };
 288         };
 289 };
 290
 291 &i2c3 {
 292         clock-frequency = <100000>;
 293         pinctrl-names = "default";
 294         pinctrl-0 = <&pinctrl_i2c3>;
 295         status = "okay";
 296
 297         codec: sgtl5000@0a {
 298                 compatible = "fsl,sgtl5000";
 299                 reg = <0x0a>;
 300                 clocks = <&clks IMX6QDL_CLK_CKO>;
 301                 VDDA-supply = <&reg_1p8v>;
 302                 VDDIO-supply = <&reg_3p3v>;
 303         };
 304
 305         touchscreen: egalax_ts@04 {
 306                 compatible = "eeti,egalax_ts";
 307                 reg = <0x04>;
 308                 interrupt-parent = <&gpio1>;
 309                 interrupts = <11 2>;
 310                 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 311         };
 312 };
 313
 314 &ldb {
 315         status = "okay";
 316
 317         lvds-channel@0 {
 318                 fsl,data-mapping = "spwg";
 319                 fsl,data-width = <18>;
 320                 status = "okay";
 321
 322                 display-timings {
 323                         native-mode = <&timing0>;
 324                         timing0: hsd100pxn1 {
 325                                 clock-frequency = <65000000>;
 326                                 hactive = <1024>;
 327                                 vactive = <768>;
 328                                 hback-porch = <220>;
 329                                 hfront-porch = <40>;
 330                                 vback-porch = <21>;
 331                                 vfront-porch = <7>;
 332                                 hsync-len = <60>;
 333                                 vsync-len = <10>;
 334                         };
 335                 };
 336         };
 337 };
 338
 339 &pcie {
 340         pinctrl-names = "default";
 341         pinctrl-0 = <&pinctrl_pcie>;
 342         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 343         status = "okay";
 344 };
 345
 346 &pwm2 {
 347         pinctrl-names = "default";
 348         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 349         status = "disabled";
 350 };
 351
 352 &pwm3 {
 353         pinctrl-names = "default";
 354         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 355         status = "disabled";
 356 };
 357
 358 &pwm4 {
 359         pinctrl-names = "default";
 360         pinctrl-0 = <&pinctrl_pwm4>;
 361         status = "okay";
 362 };
 363
 364 &ssi1 {
 365         status = "okay";
 366 };
 367
 368 &uart1 {
 369         pinctrl-names = "default";
 370         pinctrl-0 = <&pinctrl_uart1>;
 371         uart-has-rtscts;
 372         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 373         status = "okay";
 374 };
 375
 376 &uart2 {
 377         pinctrl-names = "default";
 378         pinctrl-0 = <&pinctrl_uart2>;
 379         status = "okay";
 380 };
 381
 382 &uart5 {
 383         pinctrl-names = "default";
 384         pinctrl-0 = <&pinctrl_uart5>;
 385         status = "okay";
 386 };
 387
 388 &usbotg {
 389         vbus-supply = <&reg_usb_otg_vbus>;
 390         pinctrl-names = "default";
 391         pinctrl-0 = <&pinctrl_usbotg>;
 392         disable-over-current;
 393         status = "okay";
 394 };
 395
 396 &usbh1 {
 397         vbus-supply = <&reg_usb_h1_vbus>;
 398         status = "okay";
 399 };
 400
 401 &usdhc3 {
 402         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 403         pinctrl-0 = <&pinctrl_usdhc3>;
 404         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 405         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 406         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 407         vmmc-supply = <&reg_3p3v>;
 408         no-1-8-v; /* firmware will remove if board revision supports */
 409         status = "okay";
 410 };
 411
 412 &wdog1 {
 413         pinctrl-names = "default";
 414         pinctrl-0 = <&pinctrl_wdog>;
 415         fsl,ext-reset-output;
 416 };
 417
 418 &iomuxc {
 419         imx6qdl-gw53xx {
 420                 pinctrl_audmux: audmuxgrp {
 421                         fsl,pins = <
 422                                 MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
 423                                 MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
 424                                 MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
 425                                 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
 426                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
 427                         >;
 428                 };
 429
 430                 pinctrl_enet: enetgrp {
 431                         fsl,pins = <
 432                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 433                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 434                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 435                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 436                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 437                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 438                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 439                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 440                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 441                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 442                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 443                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 444                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 445                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 446                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 447                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 448                         >;
 449                 };
 450
 451                 pinctrl_flexcan1: flexcan1grp {
 452                         fsl,pins = <
 453                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 454                                 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 455                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
 456                         >;
 457                 };
 458
 459                 pinctrl_gpio_leds: gpioledsgrp {
 460                         fsl,pins = <
 461                                 MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
 462                                 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
 463                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
 464                         >;
 465                 };
 466
 467                 pinctrl_gpmi_nand: gpminandgrp {
 468                         fsl,pins = <
 469                                 MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 470                                 MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 471                                 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 472                                 MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 473                                 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 474                                 MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 475                                 MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 476                                 MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 477                                 MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 478                                 MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 479                                 MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 480                                 MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 481                                 MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 482                                 MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 483                                 MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 484                         >;
 485                 };
 486
 487                 pinctrl_i2c1: i2c1grp {
 488                         fsl,pins = <
 489                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 490                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 491                         >;
 492                 };
 493
 494                 pinctrl_i2c2: i2c2grp {
 495                         fsl,pins = <
 496                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 497                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 498                         >;
 499                 };
 500
 501                 pinctrl_i2c3: i2c3grp {
 502                         fsl,pins = <
 503                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 504                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 505                         >;
 506                 };
 507
 508                 pinctrl_pcie: pciegrp {
 509                         fsl,pins = <
 510                                 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
 511                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
 512                         >;
 513                 };
 514
 515                 pinctrl_pmic: pmicgrp {
 516                         fsl,pins = <
 517                                 MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
 518                         >;
 519                 };
 520
 521                 pinctrl_pps: ppsgrp {
 522                         fsl,pins = <
 523                                 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 524                         >;
 525                 };
 526
 527                 pinctrl_pwm2: pwm2grp {
 528                         fsl,pins = <
 529                                 MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 530                         >;
 531                 };
 532
 533                 pinctrl_pwm3: pwm3grp {
 534                         fsl,pins = <
 535                                 MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 536                         >;
 537                 };
 538
 539                 pinctrl_pwm4: pwm4grp {
 540                         fsl,pins = <
 541                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 542                         >;
 543                 };
 544
 545                 pinctrl_uart1: uart1grp {
 546                         fsl,pins = <
 547                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 548                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 549                                 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 550                         >;
 551                 };
 552
 553                 pinctrl_uart2: uart2grp {
 554                         fsl,pins = <
 555                                 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 556                                 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 557                         >;
 558                 };
 559
 560                 pinctrl_uart5: uart5grp {
 561                         fsl,pins = <
 562                                 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 563                                 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 564                         >;
 565                 };
 566
 567                 pinctrl_usbotg: usbotggrp {
 568                         fsl,pins = <
 569                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 570                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
 571                                 MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x1b0b0 /* OC */
 572                         >;
 573                 };
 574
 575                 pinctrl_usdhc3: usdhc3grp {
 576                         fsl,pins = <
 577                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 578                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 579                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 580                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 581                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 582                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 583                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 584                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 585                         >;
 586                 };
 587
 588                 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 589                         fsl,pins = <
 590                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 591                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
 592                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 593                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 594                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 595                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 596                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 597                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 598                         >;
 599                 };
 600
 601                 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 602                         fsl,pins = <
 603                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 604                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 605                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 606                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 607                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 608                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 609                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 610                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 611                         >;
 612                 };
 613
 614                 pinctrl_wdog: wdoggrp {
 615                         fsl,pins = <
 616                                 MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 617                         >;
 618                 };
 619         };
 620 };