arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         /* these are used by bootloader for disabling nodes */
  16         aliases {
  17                 led0 = &led0;
  18                 led1 = &led1;
  19                 led2 = &led2;
  20                 nand = &gpmi;
  21                 ssi0 = &ssi1;
  22                 usb0 = &usbh1;
  23                 usb1 = &usbotg;
  24         };
  25
  26         chosen {
  27                 bootargs = "console=ttymxc1,115200";
  28         };
  29
  30         backlight {
  31                 compatible = "pwm-backlight";
  32                 pwms = <&pwm4 0 5000000>;
  33                 brightness-levels = <0 4 8 16 32 64 128 255>;
  34                 default-brightness-level = <7>;
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39                 pinctrl-names = "default";
  40                 pinctrl-0 = <&pinctrl_gpio_leds>;
  41
  42                 led0: user1 {
  43                         label = "user1";
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  45                         default-state = "on";
  46                         linux,default-trigger = "heartbeat";
  47                 };
  48
  49                 led1: user2 {
  50                         label = "user2";
  51                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  52                         default-state = "off";
  53                 };
  54
  55                 led2: user3 {
  56                         label = "user3";
  57                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  58                         default-state = "off";
  59                 };
  60         };
  61
  62         memory {
  63                 reg = <0x10000000 0x20000000>;
  64         };
  65
  66         pps {
  67                 compatible = "pps-gpio";
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&pinctrl_pps>;
  70                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  71                 status = "okay";
  72         };
  73
  74         reg_1p0v: regulator-1p0v {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "1P0V";
  77                 regulator-min-microvolt = <1000000>;
  78                 regulator-max-microvolt = <1000000>;
  79                 regulator-always-on;
  80         };
  81
  82         reg_3p3v: regulator-3p3v {
  83                 compatible = "regulator-fixed";
  84                 regulator-name = "3P3V";
  85                 regulator-min-microvolt = <3300000>;
  86                 regulator-max-microvolt = <3300000>;
  87                 regulator-always-on;
  88         };
  89
  90         reg_5p0v: regulator-5p0v {
  91                 compatible = "regulator-fixed";
  92                 regulator-name = "5P0V";
  93                 regulator-min-microvolt = <5000000>;
  94                 regulator-max-microvolt = <5000000>;
  95                 regulator-always-on;
  96         };
  97
  98         reg_usb_otg_vbus: regulator-usb-otg-vbus {
  99                 compatible = "regulator-fixed";
 100                 regulator-name = "usb_otg_vbus";
 101                 regulator-min-microvolt = <5000000>;
 102                 regulator-max-microvolt = <5000000>;
 103                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 104                 enable-active-high;
 105         };
 106
 107         sound {
 108                 compatible = "fsl,imx6q-ventana-sgtl5000",
 109                              "fsl,imx-audio-sgtl5000";
 110                 model = "sgtl5000-audio";
 111                 ssi-controller = <&ssi1>;
 112                 audio-codec = <&codec>;
 113                 audio-routing =
 114                         "MIC_IN", "Mic Jack",
 115                         "Mic Jack", "Mic Bias",
 116                         "Headphone Jack", "HP_OUT";
 117                 mux-int-port = <1>;
 118                 mux-ext-port = <4>;
 119         };
 120 };
 121
 122 &audmux {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_audmux>;
 125         status = "okay";
 126 };
 127
 128 &can1 {
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&pinctrl_flexcan1>;
 131         status = "okay";
 132 };
 133
 134 &clks {
 135         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 136                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 137         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 138                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 139 };
 140
 141 &ecspi3 {
 142         cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&pinctrl_ecspi3>;
 145         status = "okay";
 146 };
 147
 148 &fec {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_enet>;
 151         phy-mode = "rgmii-id";
 152         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 153         status = "okay";
 154 };
 155
 156 &gpmi {
 157         pinctrl-names = "default";
 158         pinctrl-0 = <&pinctrl_gpmi_nand>;
 159         status = "okay";
 160 };
 161
 162 &hdmi {
 163         ddc-i2c-bus = <&i2c3>;
 164         status = "okay";
 165 };
 166
 167 &i2c1 {
 168         clock-frequency = <100000>;
 169         pinctrl-names = "default";
 170         pinctrl-0 = <&pinctrl_i2c1>;
 171         status = "okay";
 172
 173         eeprom1: eeprom@50 {
 174                 compatible = "atmel,24c02";
 175                 reg = <0x50>;
 176                 pagesize = <16>;
 177         };
 178
 179         eeprom2: eeprom@51 {
 180                 compatible = "atmel,24c02";
 181                 reg = <0x51>;
 182                 pagesize = <16>;
 183         };
 184
 185         eeprom3: eeprom@52 {
 186                 compatible = "atmel,24c02";
 187                 reg = <0x52>;
 188                 pagesize = <16>;
 189         };
 190
 191         eeprom4: eeprom@53 {
 192                 compatible = "atmel,24c02";
 193                 reg = <0x53>;
 194                 pagesize = <16>;
 195         };
 196
 197         gpio: pca9555@23 {
 198                 compatible = "nxp,pca9555";
 199                 reg = <0x23>;
 200                 gpio-controller;
 201                 #gpio-cells = <2>;
 202         };
 203
 204         rtc: ds1672@68 {
 205                 compatible = "dallas,ds1672";
 206                 reg = <0x68>;
 207         };
 208 };
 209
 210 &i2c2 {
 211         clock-frequency = <100000>;
 212         pinctrl-names = "default";
 213         pinctrl-0 = <&pinctrl_i2c2>;
 214         status = "okay";
 215
 216         ltc3676: pmic@3c {
 217                 compatible = "lltc,ltc3676";
 218                 reg = <0x3c>;
 219                 pinctrl-names = "default";
 220                 pinctrl-0 = <&pinctrl_pmic>;
 221                 interrupt-parent = <&gpio1>;
 222                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 223
 224                 regulators {
 225                         /* VDD_SOC (1+R1/R2 = 1.635) */
 226                         reg_vdd_soc: sw1 {
 227                                 regulator-name = "vddsoc";
 228                                 regulator-min-microvolt = <674400>;
 229                                 regulator-max-microvolt = <1308000>;
 230                                 lltc,fb-voltage-divider = <127000 200000>;
 231                                 regulator-ramp-delay = <7000>;
 232                                 regulator-boot-on;
 233                                 regulator-always-on;
 234                         };
 235
 236                         /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 237                         reg_1p8v: sw2 {
 238                                 regulator-name = "vdd1p8";
 239                                 regulator-min-microvolt = <1033310>;
 240                                 regulator-max-microvolt = <2004000>;
 241                                 lltc,fb-voltage-divider = <301000 200000>;
 242                                 regulator-ramp-delay = <7000>;
 243                                 regulator-boot-on;
 244                                 regulator-always-on;
 245                         };
 246
 247                         /* VDD_ARM (1+R1/R2 = 1.635) */
 248                         reg_vdd_arm: sw3 {
 249                                 regulator-name = "vddarm";
 250                                 regulator-min-microvolt = <674400>;
 251                                 regulator-max-microvolt = <1308000>;
 252                                 lltc,fb-voltage-divider = <127000 200000>;
 253                                 regulator-ramp-delay = <7000>;
 254                                 regulator-boot-on;
 255                                 regulator-always-on;
 256                         };
 257
 258                         /* VDD_DDR (1+R1/R2 = 2.105) */
 259                         reg_vdd_ddr: sw4 {
 260                                 regulator-name = "vddddr";
 261                                 regulator-min-microvolt = <868310>;
 262                                 regulator-max-microvolt = <1684000>;
 263                                 lltc,fb-voltage-divider = <221000 200000>;
 264                                 regulator-ramp-delay = <7000>;
 265                                 regulator-boot-on;
 266                                 regulator-always-on;
 267                         };
 268
 269                         /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
 270                         reg_2p5v: ldo2 {
 271                                 regulator-name = "vdd2p5";
 272                                 regulator-min-microvolt = <2490375>;
 273                                 regulator-max-microvolt = <2490375>;
 274                                 lltc,fb-voltage-divider = <487000 200000>;
 275                                 regulator-boot-on;
 276                                 regulator-always-on;
 277                         };
 278
 279                         /* VDD_AUD_1P8: Audio codec */
 280                         reg_aud_1p8v: ldo3 {
 281                                 regulator-name = "vdd1p8";
 282                                 regulator-min-microvolt = <1800000>;
 283                                 regulator-max-microvolt = <1800000>;
 284                                 regulator-boot-on;
 285                         };
 286
 287                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 288                         reg_3p0v: ldo4 {
 289                                 regulator-name = "vdd3p0";
 290                                 regulator-min-microvolt = <3023250>;
 291                                 regulator-max-microvolt = <3023250>;
 292                                 lltc,fb-voltage-divider = <634000 200000>;
 293                                 regulator-boot-on;
 294                                 regulator-always-on;
 295                         };
 296                 };
 297         };
 298 };
 299
 300 &i2c3 {
 301         clock-frequency = <100000>;
 302         pinctrl-names = "default";
 303         pinctrl-0 = <&pinctrl_i2c3>;
 304         status = "okay";
 305
 306         codec: sgtl5000@0a {
 307                 compatible = "fsl,sgtl5000";
 308                 reg = <0x0a>;
 309                 clocks = <&clks IMX6QDL_CLK_CKO>;
 310                 VDDA-supply = <&reg_1p8v>;
 311                 VDDIO-supply = <&reg_3p3v>;
 312         };
 313
 314         touchscreen: egalax_ts@04 {
 315                 compatible = "eeti,egalax_ts";
 316                 reg = <0x04>;
 317                 interrupt-parent = <&gpio7>;
 318                 interrupts = <12 2>;
 319                 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 320         };
 321 };
 322
 323 &ldb {
 324         status = "okay";
 325
 326         lvds-channel@0 {
 327                 fsl,data-mapping = "spwg";
 328                 fsl,data-width = <18>;
 329                 status = "okay";
 330
 331                 display-timings {
 332                         native-mode = <&timing0>;
 333                         timing0: hsd100pxn1 {
 334                                 clock-frequency = <65000000>;
 335                                 hactive = <1024>;
 336                                 vactive = <768>;
 337                                 hback-porch = <220>;
 338                                 hfront-porch = <40>;
 339                                 vback-porch = <21>;
 340                                 vfront-porch = <7>;
 341                                 hsync-len = <60>;
 342                                 vsync-len = <10>;
 343                         };
 344                 };
 345         };
 346 };
 347
 348 &pcie {
 349         pinctrl-names = "default";
 350         pinctrl-0 = <&pinctrl_pcie>;
 351         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 352         status = "okay";
 353 };
 354
 355 &pwm2 {
 356         pinctrl-names = "default";
 357         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 358         status = "disabled";
 359 };
 360
 361 &pwm3 {
 362         pinctrl-names = "default";
 363         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 364         status = "disabled";
 365 };
 366
 367 &pwm4 {
 368         pinctrl-names = "default";
 369         pinctrl-0 = <&pinctrl_pwm4>;
 370         status = "okay";
 371 };
 372
 373 &ssi1 {
 374         status = "okay";
 375 };
 376
 377 &uart1 {
 378         pinctrl-names = "default";
 379         pinctrl-0 = <&pinctrl_uart1>;
 380         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 381         status = "okay";
 382 };
 383
 384 &uart2 {
 385         pinctrl-names = "default";
 386         pinctrl-0 = <&pinctrl_uart2>;
 387         status = "okay";
 388 };
 389
 390 &uart5 {
 391         pinctrl-names = "default";
 392         pinctrl-0 = <&pinctrl_uart5>;
 393         status = "okay";
 394 };
 395
 396 &usbotg {
 397         vbus-supply = <&reg_usb_otg_vbus>;
 398         pinctrl-names = "default";
 399         pinctrl-0 = <&pinctrl_usbotg>;
 400         disable-over-current;
 401         status = "okay";
 402 };
 403
 404 &usbh1 {
 405         status = "okay";
 406 };
 407
 408 &usdhc3 {
 409         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 410         pinctrl-0 = <&pinctrl_usdhc3>;
 411         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 412         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 413         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 414         vmmc-supply = <&reg_3p3v>;
 415         no-1-8-v; /* firmware will remove if board revision supports */
 416         status = "okay";
 417 };
 418
 419 &wdog1 {
 420         pinctrl-names = "default";
 421         pinctrl-0 = <&pinctrl_wdog>;
 422         fsl,ext-reset-output;
 423 };
 424
 425 &iomuxc {
 426         imx6qdl-gw52xx {
 427                 pinctrl_audmux: audmuxgrp {
 428                         fsl,pins = <
 429                                 MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
 430                                 MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
 431                                 MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
 432                                 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
 433                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0 /* AUD4_MCK */
 434                         >;
 435                 };
 436
 437                 pinctrl_ecspi3: escpi3grp {
 438                         fsl,pins = <
 439                                 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 440                                 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 441                                 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 442                                 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x100b1
 443                         >;
 444                 };
 445
 446                 pinctrl_enet: enetgrp {
 447                         fsl,pins = <
 448                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 449                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 450                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 451                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 452                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 453                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 454                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 455                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 456                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 457                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 458                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 459                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 460                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 461                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 462                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 463                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 464                                 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x1b0b0 /* PHY Reset */
 465                         >;
 466                 };
 467
 468                 pinctrl_flexcan1: flexcan1grp {
 469                         fsl,pins = <
 470                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 471                                 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 472                                 MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x4001b0b0 /* CAN_STBY */
 473                         >;
 474                 };
 475
 476                 pinctrl_gpio_leds: gpioledsgrp {
 477                         fsl,pins = <
 478                                 MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
 479                                 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
 480                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
 481                         >;
 482                 };
 483
 484                 pinctrl_gpmi_nand: gpminandgrp {
 485                         fsl,pins = <
 486                                 MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 487                                 MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 488                                 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 489                                 MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 490                                 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 491                                 MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 492                                 MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 493                                 MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 494                                 MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 495                                 MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 496                                 MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 497                                 MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 498                                 MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 499                                 MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 500                                 MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 501                         >;
 502                 };
 503
 504                 pinctrl_i2c1: i2c1grp {
 505                         fsl,pins = <
 506                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 507                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 508                         >;
 509                 };
 510
 511                 pinctrl_i2c2: i2c2grp {
 512                         fsl,pins = <
 513                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 514                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 515                         >;
 516                 };
 517
 518                 pinctrl_i2c3: i2c3grp {
 519                         fsl,pins = <
 520                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 521                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 522                         >;
 523                 };
 524
 525                 pinctrl_pcie: pciegrp {
 526                         fsl,pins = <
 527                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE_RST# */
 528                         >;
 529                 };
 530
 531                 pinctrl_pmic: pmicgrp {
 532                         fsl,pins = <
 533                                 MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
 534                         >;
 535                 };
 536
 537                 pinctrl_pps: ppsgrp {
 538                         fsl,pins = <
 539                                 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 540                         >;
 541                 };
 542
 543                 pinctrl_pwm2: pwm2grp {
 544                         fsl,pins = <
 545                                 MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 546                         >;
 547                 };
 548
 549                 pinctrl_pwm3: pwm3grp {
 550                         fsl,pins = <
 551                                 MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 552                         >;
 553                 };
 554
 555                 pinctrl_pwm4: pwm4grp {
 556                         fsl,pins = <
 557                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 558                         >;
 559                 };
 560
 561                 pinctrl_uart1: uart1grp {
 562                         fsl,pins = <
 563                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 564                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 565                                 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 566                         >;
 567                 };
 568
 569                 pinctrl_uart2: uart2grp {
 570                         fsl,pins = <
 571                                 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 572                                 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 573                         >;
 574                 };
 575
 576                 pinctrl_uart5: uart5grp {
 577                         fsl,pins = <
 578                                 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 579                                 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 580                         >;
 581                 };
 582
 583                 pinctrl_usbotg: usbotggrp {
 584                         fsl,pins = <
 585                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 586                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0 /* OTG_PWR_EN */
 587                         >;
 588                 };
 589
 590                 pinctrl_usdhc3: usdhc3grp {
 591                         fsl,pins = <
 592                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 593                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 594                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 595                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 596                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 597                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 598                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 599                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 600                         >;
 601                 };
 602
 603                 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 604                         fsl,pins = <
 605                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 606                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x170b9
 607                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 608                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 609                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 610                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 611                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 612                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 613                         >;
 614                 };
 615
 616                 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 617                         fsl,pins = <
 618                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 619                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 620                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 621                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 622                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 623                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 624                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 625                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 626                         >;
 627                 };
 628
 629                 pinctrl_wdog: wdoggrp {
 630                         fsl,pins = <
 631                                 MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 632                         >;
 633                 };
 634         };
 635 };