arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         regulators {
   5                 compatible = "simple-bus";
   6                 #address-cells = <1>;
   7                 #size-cells = <0>;
   8
   9                 dummy_reg: regulator@0 {
  10                         compatible = "regulator-fixed";
  11                         reg = <0>;
  12                         regulator-name = "dummy-supply";
  13                 };
  14
  15                 reg_usb_otg_vbus: regulator@1 {
  16                         compatible = "regulator-fixed";
  17                         reg = <1>;
  18                         regulator-name = "usb_otg_vbus";
  19                         regulator-min-microvolt = <5000000>;
  20                         regulator-max-microvolt = <5000000>;
  21                         gpio = <&gpio3 22 0>;
  22                         enable-active-high;
  23                 };
  24         };
  25
  26         chosen {
  27                 stdout-path = &uart1;
  28         };
  29 };
  30
  31 &ecspi3 {
  32         cs-gpios = <&gpio4 24 0>;
  33         pinctrl-names = "default";
  34         pinctrl-0 = <&pinctrl_ecspi3>;
  35         status = "okay";
  36
  37         flash: m25p80@0 {
  38                 #address-cells = <1>;
  39                 #size-cells = <1>;
  40                 compatible = "sst,sst25vf040b", "jedec,spi-nor";
  41                 spi-max-frequency = <20000000>;
  42                 reg = <0>;
  43         };
  44 };
  45
  46 &fec {
  47         pinctrl-names = "default";
  48         pinctrl-0 = <&pinctrl_enet>;
  49         status = "okay";
  50         phy-mode = "rgmii";
  51 };
  52
  53 &iomuxc {
  54         pinctrl-names = "default";
  55         pinctrl-0 = <&pinctrl_hog>;
  56
  57         imx6qdl-dfi-fs700-m60 {
  58                 pinctrl_hog: hoggrp {
  59                         fsl,pins = <
  60                                 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
  61                                 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
  62                                 MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
  63                                 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
  64                         >;
  65                 };
  66
  67                 pinctrl_enet: enetgrp {
  68                         fsl,pins = <
  69                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
  70                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
  71                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
  72                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
  73                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
  74                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
  75                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
  76                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
  77                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
  78                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
  79                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
  80                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
  81                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
  82                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
  83                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
  84                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
  85                         >;
  86                 };
  87
  88                 pinctrl_i2c2: i2c2grp {
  89                         fsl,pins = <
  90                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
  91                                 MX6QDL_PAD_EIM_D16__I2C2_SDA            0x4001b8b1
  92                         >;
  93                 };
  94
  95                 pinctrl_uart1: uart1grp {
  96                         fsl,pins = <
  97                                 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
  98                                 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
  99                         >;
 100                 };
 101
 102                 pinctrl_usbotg: usbotggrp {
 103                         fsl,pins = <
 104                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 105                         >;
 106                 };
 107
 108                 pinctrl_usdhc2: usdhc2grp {
 109                         fsl,pins = <
 110                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 111                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 112                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 113                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 114                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 115                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 116                                 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
 117                         >;
 118                 };
 119
 120                 pinctrl_usdhc3: usdhc3grp {
 121                         fsl,pins = <
 122                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 123                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 124                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 125                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 126                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 127                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 128                         >;
 129                 };
 130
 131                 pinctrl_usdhc4: usdhc4grp {
 132                         fsl,pins = <
 133                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 134                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 135                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 136                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 137                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 138                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 139                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 140                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 141                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 142                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 143                         >;
 144                 };
 145
 146                 pinctrl_ecspi3: ecspi3grp {
 147                         fsl,pins = <
 148                                 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 149                                 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 150                                 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 151                                 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
 152                         >;
 153                 };
 154         };
 155 };
 156
 157 &i2c2 {
 158         pinctrl-names = "default";
 159         pinctrl-0 = <&pinctrl_i2c2>;
 160         status = "okay";
 161 };
 162
 163 &uart1 {
 164         pinctrl-names = "default";
 165         pinctrl-0 = <&pinctrl_uart1>;
 166         status = "okay";
 167 };
 168
 169 &usbh1 {
 170         status = "okay";
 171 };
 172
 173 &usbotg {
 174         vbus-supply = <&reg_usb_otg_vbus>;
 175         pinctrl-names = "default";
 176         pinctrl-0 = <&pinctrl_usbotg>;
 177         disable-over-current;
 178         dr_mode = "host";
 179         status = "okay";
 180 };
 181
 182 &usdhc2 { /* module slot */
 183         pinctrl-names = "default";
 184         pinctrl-0 = <&pinctrl_usdhc2>;
 185         cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 186         status = "okay";
 187 };
 188
 189 &usdhc3 { /* baseboard slot */
 190         pinctrl-names = "default";
 191         pinctrl-0 = <&pinctrl_usdhc3>;
 192 };
 193
 194 &usdhc4 { /* eMMC */
 195         pinctrl-names = "default";
 196         pinctrl-0 = <&pinctrl_usdhc4>;
 197         bus-width = <8>;
 198         non-removable;
 199         status = "okay";
 200 };