arch/arm/boot/dts/imx6q-sabreauto.dts

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 /dts-v1/;
  14 /include/ "imx6q.dtsi"
  15
  16 / {
  17         model = "Freescale i.MX6 Quad SABRE Automotive Board";
  18         compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
  19
  20         memory {
  21                 reg = <0x10000000 0x80000000>;
  22         };
  23
  24         soc {
  25                 aips-bus@02000000 { /* AIPS1 */
  26                         iomuxc@020e0000 {
  27                                 pinctrl-names = "default";
  28                                 pinctrl-0 = <&pinctrl_hog>;
  29
  30                                 hog {
  31                                         pinctrl_hog: hoggrp {
  32                                                 fsl,pins = <
  33                                                         1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
  34                                                         13   0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
  35                                                 >;
  36                                         };
  37                                 };
  38                         };
  39                 };
  40
  41                 aips-bus@02100000 { /* AIPS2 */
  42                         uart4: serial@021f0000 {
  43                                 pinctrl-names = "default";
  44                                 pinctrl-0 = <&pinctrl_uart4_1>;
  45                                 status = "okay";
  46                         };
  47
  48                         ethernet@02188000 {
  49                                 pinctrl-names = "default";
  50                                 pinctrl-0 = <&pinctrl_enet_2>;
  51                                 phy-mode = "rgmii";
  52                                 status = "okay";
  53                         };
  54
  55                         usdhc@02198000 { /* uSDHC3 */
  56                                 pinctrl-names = "default";
  57                                 pinctrl-0 = <&pinctrl_usdhc3_1>;
  58                                 cd-gpios = <&gpio6 15 0>;
  59                                 wp-gpios = <&gpio1 13 0>;
  60                                 status = "okay";
  61                         };
  62                 };
  63         };
  64 };