arch/arm/boot/dts/imx53.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include "skeleton.dtsi"
  14 #include "imx53-pinfunc.h"
  15 #include <dt-bindings/clock/imx5-clock.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/input/input.h>
  18
  19 / {
  20         aliases {
  21                 ethernet0 = &fec;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28                 gpio6 = &gpio7;
  29                 i2c0 = &i2c1;
  30                 i2c1 = &i2c2;
  31                 i2c2 = &i2c3;
  32                 mmc0 = &esdhc1;
  33                 mmc1 = &esdhc2;
  34                 mmc2 = &esdhc3;
  35                 mmc3 = &esdhc4;
  36                 serial0 = &uart1;
  37                 serial1 = &uart2;
  38                 serial2 = &uart3;
  39                 serial3 = &uart4;
  40                 serial4 = &uart5;
  41                 spi0 = &ecspi1;
  42                 spi1 = &ecspi2;
  43                 spi2 = &cspi;
  44         };
  45
  46         cpus {
  47                 #address-cells = <1>;
  48                 #size-cells = <0>;
  49                 cpu@0 {
  50                         device_type = "cpu";
  51                         compatible = "arm,cortex-a8";
  52                         reg = <0x0>;
  53                 };
  54         };
  55
  56         display-subsystem {
  57                 compatible = "fsl,imx-display-subsystem";
  58                 ports = <&ipu_di0>, <&ipu_di1>;
  59         };
  60
  61         tzic: tz-interrupt-controller@0fffc000 {
  62                 compatible = "fsl,imx53-tzic", "fsl,tzic";
  63                 interrupt-controller;
  64                 #interrupt-cells = <1>;
  65                 reg = <0x0fffc000 0x4000>;
  66         };
  67
  68         clocks {
  69                 #address-cells = <1>;
  70                 #size-cells = <0>;
  71
  72                 ckil {
  73                         compatible = "fsl,imx-ckil", "fixed-clock";
  74                         #clock-cells = <0>;
  75                         clock-frequency = <32768>;
  76                 };
  77
  78                 ckih1 {
  79                         compatible = "fsl,imx-ckih1", "fixed-clock";
  80                         #clock-cells = <0>;
  81                         clock-frequency = <22579200>;
  82                 };
  83
  84                 ckih2 {
  85                         compatible = "fsl,imx-ckih2", "fixed-clock";
  86                         #clock-cells = <0>;
  87                         clock-frequency = <0>;
  88                 };
  89
  90                 osc {
  91                         compatible = "fsl,imx-osc", "fixed-clock";
  92                         #clock-cells = <0>;
  93                         clock-frequency = <24000000>;
  94                 };
  95         };
  96
  97         soc {
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100                 compatible = "simple-bus";
 101                 interrupt-parent = <&tzic>;
 102                 ranges;
 103
 104                 sata: sata@10000000 {
 105                         compatible = "fsl,imx53-ahci";
 106                         reg = <0x10000000 0x1000>;
 107                         interrupts = <28>;
 108                         clocks = <&clks IMX5_CLK_SATA_GATE>,
 109                                  <&clks IMX5_CLK_SATA_REF>,
 110                                  <&clks IMX5_CLK_AHB>;
 111                         clock-names = "sata", "sata_ref", "ahb";
 112                         status = "disabled";
 113                 };
 114
 115                 ipu: ipu@18000000 {
 116                         #address-cells = <1>;
 117                         #size-cells = <0>;
 118                         compatible = "fsl,imx53-ipu";
 119                         reg = <0x18000000 0x08000000>;
 120                         interrupts = <11 10>;
 121                         clocks = <&clks IMX5_CLK_IPU_GATE>,
 122                                  <&clks IMX5_CLK_IPU_DI0_GATE>,
 123                                  <&clks IMX5_CLK_IPU_DI1_GATE>;
 124                         clock-names = "bus", "di0", "di1";
 125                         resets = <&src 2>;
 126
 127                         ipu_di0: port@2 {
 128                                 #address-cells = <1>;
 129                                 #size-cells = <0>;
 130                                 reg = <2>;
 131
 132                                 ipu_di0_disp0: endpoint@0 {
 133                                         reg = <0>;
 134                                 };
 135
 136                                 ipu_di0_lvds0: endpoint@1 {
 137                                         reg = <1>;
 138                                         remote-endpoint = <&lvds0_in>;
 139                                 };
 140                         };
 141
 142                         ipu_di1: port@3 {
 143                                 #address-cells = <1>;
 144                                 #size-cells = <0>;
 145                                 reg = <3>;
 146
 147                                 ipu_di1_disp1: endpoint@0 {
 148                                         reg = <0>;
 149                                 };
 150
 151                                 ipu_di1_lvds1: endpoint@1 {
 152                                         reg = <1>;
 153                                         remote-endpoint = <&lvds1_in>;
 154                                 };
 155
 156                                 ipu_di1_tve: endpoint@2 {
 157                                         reg = <2>;
 158                                         remote-endpoint = <&tve_in>;
 159                                 };
 160                         };
 161                 };
 162
 163                 aips@50000000 { /* AIPS1 */
 164                         compatible = "fsl,aips-bus", "simple-bus";
 165                         #address-cells = <1>;
 166                         #size-cells = <1>;
 167                         reg = <0x50000000 0x10000000>;
 168                         ranges;
 169
 170                         spba@50000000 {
 171                                 compatible = "fsl,spba-bus", "simple-bus";
 172                                 #address-cells = <1>;
 173                                 #size-cells = <1>;
 174                                 reg = <0x50000000 0x40000>;
 175                                 ranges;
 176
 177                                 esdhc1: esdhc@50004000 {
 178                                         compatible = "fsl,imx53-esdhc";
 179                                         reg = <0x50004000 0x4000>;
 180                                         interrupts = <1>;
 181                                         clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
 182                                                  <&clks IMX5_CLK_DUMMY>,
 183                                                  <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 184                                         clock-names = "ipg", "ahb", "per";
 185                                         bus-width = <4>;
 186                                         status = "disabled";
 187                                 };
 188
 189                                 esdhc2: esdhc@50008000 {
 190                                         compatible = "fsl,imx53-esdhc";
 191                                         reg = <0x50008000 0x4000>;
 192                                         interrupts = <2>;
 193                                         clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
 194                                                  <&clks IMX5_CLK_DUMMY>,
 195                                                  <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 196                                         clock-names = "ipg", "ahb", "per";
 197                                         bus-width = <4>;
 198                                         status = "disabled";
 199                                 };
 200
 201                                 uart3: serial@5000c000 {
 202                                         compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 203                                         reg = <0x5000c000 0x4000>;
 204                                         interrupts = <33>;
 205                                         clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 206                                                  <&clks IMX5_CLK_UART3_PER_GATE>;
 207                                         clock-names = "ipg", "per";
 208                                         status = "disabled";
 209                                 };
 210
 211                                 ecspi1: ecspi@50010000 {
 212                                         #address-cells = <1>;
 213                                         #size-cells = <0>;
 214                                         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 215                                         reg = <0x50010000 0x4000>;
 216                                         interrupts = <36>;
 217                                         clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
 218                                                  <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 219                                         clock-names = "ipg", "per";
 220                                         status = "disabled";
 221                                 };
 222
 223                                 ssi2: ssi@50014000 {
 224                                         #sound-dai-cells = <0>;
 225                                         compatible = "fsl,imx53-ssi",
 226                                                         "fsl,imx51-ssi",
 227                                                         "fsl,imx21-ssi";
 228                                         reg = <0x50014000 0x4000>;
 229                                         interrupts = <30>;
 230                                         clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
 231                                         dmas = <&sdma 24 1 0>,
 232                                                <&sdma 25 1 0>;
 233                                         dma-names = "rx", "tx";
 234                                         fsl,fifo-depth = <15>;
 235                                         status = "disabled";
 236                                 };
 237
 238                                 esdhc3: esdhc@50020000 {
 239                                         compatible = "fsl,imx53-esdhc";
 240                                         reg = <0x50020000 0x4000>;
 241                                         interrupts = <3>;
 242                                         clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
 243                                                  <&clks IMX5_CLK_DUMMY>,
 244                                                  <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 245                                         clock-names = "ipg", "ahb", "per";
 246                                         bus-width = <4>;
 247                                         status = "disabled";
 248                                 };
 249
 250                                 esdhc4: esdhc@50024000 {
 251                                         compatible = "fsl,imx53-esdhc";
 252                                         reg = <0x50024000 0x4000>;
 253                                         interrupts = <4>;
 254                                         clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
 255                                                  <&clks IMX5_CLK_DUMMY>,
 256                                                  <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 257                                         clock-names = "ipg", "ahb", "per";
 258                                         bus-width = <4>;
 259                                         status = "disabled";
 260                                 };
 261                         };
 262
 263                         aipstz1: bridge@53f00000 {
 264                                 compatible = "fsl,imx53-aipstz";
 265                                 reg = <0x53f00000 0x60>;
 266                         };
 267
 268                         usbphy0: usbphy@0 {
 269                                 compatible = "usb-nop-xceiv";
 270                                 clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 271                                 clock-names = "main_clk";
 272                                 status = "okay";
 273                         };
 274
 275                         usbphy1: usbphy@1 {
 276                                 compatible = "usb-nop-xceiv";
 277                                 clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 278                                 clock-names = "main_clk";
 279                                 status = "okay";
 280                         };
 281
 282                         usbotg: usb@53f80000 {
 283                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 284                                 reg = <0x53f80000 0x0200>;
 285                                 interrupts = <18>;
 286                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 287                                 fsl,usbmisc = <&usbmisc 0>;
 288                                 fsl,usbphy = <&usbphy0>;
 289                                 status = "disabled";
 290                         };
 291
 292                         usbh1: usb@53f80200 {
 293                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 294                                 reg = <0x53f80200 0x0200>;
 295                                 interrupts = <14>;
 296                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 297                                 fsl,usbmisc = <&usbmisc 1>;
 298                                 fsl,usbphy = <&usbphy1>;
 299                                 status = "disabled";
 300                         };
 301
 302                         usbh2: usb@53f80400 {
 303                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 304                                 reg = <0x53f80400 0x0200>;
 305                                 interrupts = <16>;
 306                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 307                                 fsl,usbmisc = <&usbmisc 2>;
 308                                 status = "disabled";
 309                         };
 310
 311                         usbh3: usb@53f80600 {
 312                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 313                                 reg = <0x53f80600 0x0200>;
 314                                 interrupts = <17>;
 315                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 316                                 fsl,usbmisc = <&usbmisc 3>;
 317                                 status = "disabled";
 318                         };
 319
 320                         usbmisc: usbmisc@53f80800 {
 321                                 #index-cells = <1>;
 322                                 compatible = "fsl,imx53-usbmisc";
 323                                 reg = <0x53f80800 0x200>;
 324                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 325                         };
 326
 327                         gpio1: gpio@53f84000 {
 328                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 329                                 reg = <0x53f84000 0x4000>;
 330                                 interrupts = <50 51>;
 331                                 gpio-controller;
 332                                 #gpio-cells = <2>;
 333                                 interrupt-controller;
 334                                 #interrupt-cells = <2>;
 335                         };
 336
 337                         gpio2: gpio@53f88000 {
 338                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 339                                 reg = <0x53f88000 0x4000>;
 340                                 interrupts = <52 53>;
 341                                 gpio-controller;
 342                                 #gpio-cells = <2>;
 343                                 interrupt-controller;
 344                                 #interrupt-cells = <2>;
 345                         };
 346
 347                         gpio3: gpio@53f8c000 {
 348                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 349                                 reg = <0x53f8c000 0x4000>;
 350                                 interrupts = <54 55>;
 351                                 gpio-controller;
 352                                 #gpio-cells = <2>;
 353                                 interrupt-controller;
 354                                 #interrupt-cells = <2>;
 355                         };
 356
 357                         gpio4: gpio@53f90000 {
 358                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 359                                 reg = <0x53f90000 0x4000>;
 360                                 interrupts = <56 57>;
 361                                 gpio-controller;
 362                                 #gpio-cells = <2>;
 363                                 interrupt-controller;
 364                                 #interrupt-cells = <2>;
 365                         };
 366
 367                         kpp: kpp@53f94000 {
 368                                 compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
 369                                 reg = <0x53f94000 0x4000>;
 370                                 interrupts = <60>;
 371                                 clocks = <&clks IMX5_CLK_DUMMY>;
 372                                 status = "disabled";
 373                         };
 374
 375                         wdog1: wdog@53f98000 {
 376                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 377                                 reg = <0x53f98000 0x4000>;
 378                                 interrupts = <58>;
 379                                 clocks = <&clks IMX5_CLK_DUMMY>;
 380                         };
 381
 382                         wdog2: wdog@53f9c000 {
 383                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 384                                 reg = <0x53f9c000 0x4000>;
 385                                 interrupts = <59>;
 386                                 clocks = <&clks IMX5_CLK_DUMMY>;
 387                                 status = "disabled";
 388                         };
 389
 390                         gpt: timer@53fa0000 {
 391                                 compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
 392                                 reg = <0x53fa0000 0x4000>;
 393                                 interrupts = <39>;
 394                                 clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
 395                                          <&clks IMX5_CLK_GPT_HF_GATE>;
 396                                 clock-names = "ipg", "per";
 397                         };
 398
 399                         iomuxc: iomuxc@53fa8000 {
 400                                 compatible = "fsl,imx53-iomuxc";
 401                                 reg = <0x53fa8000 0x4000>;
 402                         };
 403
 404                         gpr: iomuxc-gpr@53fa8000 {
 405                                 compatible = "fsl,imx53-iomuxc-gpr", "syscon";
 406                                 reg = <0x53fa8000 0xc>;
 407                         };
 408
 409                         ldb: ldb@53fa8008 {
 410                                 #address-cells = <1>;
 411                                 #size-cells = <0>;
 412                                 compatible = "fsl,imx53-ldb";
 413                                 reg = <0x53fa8008 0x4>;
 414                                 gpr = <&gpr>;
 415                                 clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
 416                                          <&clks IMX5_CLK_LDB_DI1_SEL>,
 417                                          <&clks IMX5_CLK_IPU_DI0_SEL>,
 418                                          <&clks IMX5_CLK_IPU_DI1_SEL>,
 419                                          <&clks IMX5_CLK_LDB_DI0_GATE>,
 420                                          <&clks IMX5_CLK_LDB_DI1_GATE>;
 421                                 clock-names = "di0_pll", "di1_pll",
 422                                               "di0_sel", "di1_sel",
 423                                               "di0", "di1";
 424                                 status = "disabled";
 425
 426                                 lvds-channel@0 {
 427                                         #address-cells = <1>;
 428                                         #size-cells = <0>;
 429                                         reg = <0>;
 430                                         status = "disabled";
 431
 432                                         port@0 {
 433                                                 reg = <0>;
 434
 435                                                 lvds0_in: endpoint {
 436                                                         remote-endpoint = <&ipu_di0_lvds0>;
 437                                                 };
 438                                         };
 439                                 };
 440
 441                                 lvds-channel@1 {
 442                                         #address-cells = <1>;
 443                                         #size-cells = <0>;
 444                                         reg = <1>;
 445                                         status = "disabled";
 446
 447                                         port@1 {
 448                                                 reg = <1>;
 449
 450                                                 lvds1_in: endpoint {
 451                                                         remote-endpoint = <&ipu_di1_lvds1>;
 452                                                 };
 453                                         };
 454                                 };
 455                         };
 456
 457                         pwm1: pwm@53fb4000 {
 458                                 #pwm-cells = <2>;
 459                                 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 460                                 reg = <0x53fb4000 0x4000>;
 461                                 clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
 462                                          <&clks IMX5_CLK_PWM1_HF_GATE>;
 463                                 clock-names = "ipg", "per";
 464                                 interrupts = <61>;
 465                         };
 466
 467                         pwm2: pwm@53fb8000 {
 468                                 #pwm-cells = <2>;
 469                                 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 470                                 reg = <0x53fb8000 0x4000>;
 471                                 clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
 472                                          <&clks IMX5_CLK_PWM2_HF_GATE>;
 473                                 clock-names = "ipg", "per";
 474                                 interrupts = <94>;
 475                         };
 476
 477                         uart1: serial@53fbc000 {
 478                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 479                                 reg = <0x53fbc000 0x4000>;
 480                                 interrupts = <31>;
 481                                 clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 482                                          <&clks IMX5_CLK_UART1_PER_GATE>;
 483                                 clock-names = "ipg", "per";
 484                                 status = "disabled";
 485                         };
 486
 487                         uart2: serial@53fc0000 {
 488                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 489                                 reg = <0x53fc0000 0x4000>;
 490                                 interrupts = <32>;
 491                                 clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 492                                          <&clks IMX5_CLK_UART2_PER_GATE>;
 493                                 clock-names = "ipg", "per";
 494                                 status = "disabled";
 495                         };
 496
 497                         can1: can@53fc8000 {
 498                                 compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 499                                 reg = <0x53fc8000 0x4000>;
 500                                 interrupts = <82>;
 501                                 clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
 502                                          <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 503                                 clock-names = "ipg", "per";
 504                                 status = "disabled";
 505                         };
 506
 507                         can2: can@53fcc000 {
 508                                 compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 509                                 reg = <0x53fcc000 0x4000>;
 510                                 interrupts = <83>;
 511                                 clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
 512                                          <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
 513                                 clock-names = "ipg", "per";
 514                                 status = "disabled";
 515                         };
 516
 517                         src: src@53fd0000 {
 518                                 compatible = "fsl,imx53-src", "fsl,imx51-src";
 519                                 reg = <0x53fd0000 0x4000>;
 520                                 #reset-cells = <1>;
 521                         };
 522
 523                         clks: ccm@53fd4000{
 524                                 compatible = "fsl,imx53-ccm";
 525                                 reg = <0x53fd4000 0x4000>;
 526                                 interrupts = <0 71 0x04 0 72 0x04>;
 527                                 #clock-cells = <1>;
 528                         };
 529
 530                         gpio5: gpio@53fdc000 {
 531                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 532                                 reg = <0x53fdc000 0x4000>;
 533                                 interrupts = <103 104>;
 534                                 gpio-controller;
 535                                 #gpio-cells = <2>;
 536                                 interrupt-controller;
 537                                 #interrupt-cells = <2>;
 538                         };
 539
 540                         gpio6: gpio@53fe0000 {
 541                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 542                                 reg = <0x53fe0000 0x4000>;
 543                                 interrupts = <105 106>;
 544                                 gpio-controller;
 545                                 #gpio-cells = <2>;
 546                                 interrupt-controller;
 547                                 #interrupt-cells = <2>;
 548                         };
 549
 550                         gpio7: gpio@53fe4000 {
 551                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 552                                 reg = <0x53fe4000 0x4000>;
 553                                 interrupts = <107 108>;
 554                                 gpio-controller;
 555                                 #gpio-cells = <2>;
 556                                 interrupt-controller;
 557                                 #interrupt-cells = <2>;
 558                         };
 559
 560                         i2c3: i2c@53fec000 {
 561                                 #address-cells = <1>;
 562                                 #size-cells = <0>;
 563                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 564                                 reg = <0x53fec000 0x4000>;
 565                                 interrupts = <64>;
 566                                 clocks = <&clks IMX5_CLK_I2C3_GATE>;
 567                                 status = "disabled";
 568                         };
 569
 570                         uart4: serial@53ff0000 {
 571                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 572                                 reg = <0x53ff0000 0x4000>;
 573                                 interrupts = <13>;
 574                                 clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
 575                                          <&clks IMX5_CLK_UART4_PER_GATE>;
 576                                 clock-names = "ipg", "per";
 577                                 status = "disabled";
 578                         };
 579                 };
 580
 581                 aips@60000000 { /* AIPS2 */
 582                         compatible = "fsl,aips-bus", "simple-bus";
 583                         #address-cells = <1>;
 584                         #size-cells = <1>;
 585                         reg = <0x60000000 0x10000000>;
 586                         ranges;
 587
 588                         aipstz2: bridge@63f00000 {
 589                                 compatible = "fsl,imx53-aipstz";
 590                                 reg = <0x63f00000 0x60>;
 591                         };
 592
 593                         iim: iim@63f98000 {
 594                                 compatible = "fsl,imx53-iim", "fsl,imx27-iim";
 595                                 reg = <0x63f98000 0x4000>;
 596                                 interrupts = <69>;
 597                                 clocks = <&clks IMX5_CLK_IIM_GATE>;
 598                         };
 599
 600                         uart5: serial@63f90000 {
 601                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 602                                 reg = <0x63f90000 0x4000>;
 603                                 interrupts = <86>;
 604                                 clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
 605                                          <&clks IMX5_CLK_UART5_PER_GATE>;
 606                                 clock-names = "ipg", "per";
 607                                 status = "disabled";
 608                         };
 609
 610                         owire: owire@63fa4000 {
 611                                 compatible = "fsl,imx53-owire", "fsl,imx21-owire";
 612                                 reg = <0x63fa4000 0x4000>;
 613                                 clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 614                                 status = "disabled";
 615                         };
 616
 617                         ecspi2: ecspi@63fac000 {
 618                                 #address-cells = <1>;
 619                                 #size-cells = <0>;
 620                                 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 621                                 reg = <0x63fac000 0x4000>;
 622                                 interrupts = <37>;
 623                                 clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
 624                                          <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 625                                 clock-names = "ipg", "per";
 626                                 status = "disabled";
 627                         };
 628
 629                         sdma: sdma@63fb0000 {
 630                                 compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 631                                 reg = <0x63fb0000 0x4000>;
 632                                 interrupts = <6>;
 633                                 clocks = <&clks IMX5_CLK_SDMA_GATE>,
 634                                          <&clks IMX5_CLK_SDMA_GATE>;
 635                                 clock-names = "ipg", "ahb";
 636                                 #dma-cells = <3>;
 637                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 638                         };
 639
 640                         cspi: cspi@63fc0000 {
 641                                 #address-cells = <1>;
 642                                 #size-cells = <0>;
 643                                 compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 644                                 reg = <0x63fc0000 0x4000>;
 645                                 interrupts = <38>;
 646                                 clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
 647                                          <&clks IMX5_CLK_CSPI_IPG_GATE>;
 648                                 clock-names = "ipg", "per";
 649                                 status = "disabled";
 650                         };
 651
 652                         i2c2: i2c@63fc4000 {
 653                                 #address-cells = <1>;
 654                                 #size-cells = <0>;
 655                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 656                                 reg = <0x63fc4000 0x4000>;
 657                                 interrupts = <63>;
 658                                 clocks = <&clks IMX5_CLK_I2C2_GATE>;
 659                                 status = "disabled";
 660                         };
 661
 662                         i2c1: i2c@63fc8000 {
 663                                 #address-cells = <1>;
 664                                 #size-cells = <0>;
 665                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 666                                 reg = <0x63fc8000 0x4000>;
 667                                 interrupts = <62>;
 668                                 clocks = <&clks IMX5_CLK_I2C1_GATE>;
 669                                 status = "disabled";
 670                         };
 671
 672                         ssi1: ssi@63fcc000 {
 673                                 #sound-dai-cells = <0>;
 674                                 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 675                                                 "fsl,imx21-ssi";
 676                                 reg = <0x63fcc000 0x4000>;
 677                                 interrupts = <29>;
 678                                 clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
 679                                 dmas = <&sdma 28 0 0>,
 680                                        <&sdma 29 0 0>;
 681                                 dma-names = "rx", "tx";
 682                                 fsl,fifo-depth = <15>;
 683                                 status = "disabled";
 684                         };
 685
 686                         audmux: audmux@63fd0000 {
 687                                 compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 688                                 reg = <0x63fd0000 0x4000>;
 689                                 status = "disabled";
 690                         };
 691
 692                         nfc: nand@63fdb000 {
 693                                 compatible = "fsl,imx53-nand";
 694                                 reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 695                                 interrupts = <8>;
 696                                 clocks = <&clks IMX5_CLK_NFC_GATE>;
 697                                 status = "disabled";
 698                         };
 699
 700                         ssi3: ssi@63fe8000 {
 701                                 #sound-dai-cells = <0>;
 702                                 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 703                                                 "fsl,imx21-ssi";
 704                                 reg = <0x63fe8000 0x4000>;
 705                                 interrupts = <96>;
 706                                 clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
 707                                 dmas = <&sdma 46 0 0>,
 708                                        <&sdma 47 0 0>;
 709                                 dma-names = "rx", "tx";
 710                                 fsl,fifo-depth = <15>;
 711                                 status = "disabled";
 712                         };
 713
 714                         fec: ethernet@63fec000 {
 715                                 compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 716                                 reg = <0x63fec000 0x4000>;
 717                                 interrupts = <87>;
 718                                 clocks = <&clks IMX5_CLK_FEC_GATE>,
 719                                          <&clks IMX5_CLK_FEC_GATE>,
 720                                          <&clks IMX5_CLK_FEC_GATE>;
 721                                 clock-names = "ipg", "ahb", "ptp";
 722                                 status = "disabled";
 723                         };
 724
 725                         tve: tve@63ff0000 {
 726                                 compatible = "fsl,imx53-tve";
 727                                 reg = <0x63ff0000 0x1000>;
 728                                 interrupts = <92>;
 729                                 clocks = <&clks IMX5_CLK_TVE_GATE>,
 730                                          <&clks IMX5_CLK_IPU_DI1_SEL>;
 731                                 clock-names = "tve", "di_sel";
 732                                 status = "disabled";
 733
 734                                 port {
 735                                         tve_in: endpoint {
 736                                                 remote-endpoint = <&ipu_di1_tve>;
 737                                         };
 738                                 };
 739                         };
 740
 741                         vpu: vpu@63ff4000 {
 742                                 compatible = "fsl,imx53-vpu";
 743                                 reg = <0x63ff4000 0x1000>;
 744                                 interrupts = <9>;
 745                                 clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
 746                                          <&clks IMX5_CLK_VPU_GATE>;
 747                                 clock-names = "per", "ahb";
 748                                 resets = <&src 1>;
 749                                 iram = <&ocram>;
 750                         };
 751                 };
 752
 753                 ocram: sram@f8000000 {
 754                         compatible = "mmio-sram";
 755                         reg = <0xf8000000 0x20000>;
 756                         clocks = <&clks IMX5_CLK_OCRAM>;
 757                 };
 758
 759                 pmu {
 760                         compatible = "arm,cortex-a8-pmu";
 761                         interrupts = <77>;
 762                 };
 763         };
 764 };