arch/arm/boot/dts/imx53-smd.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2011 Freescale Semiconductor, Inc.
   4 // Copyright 2011 Linaro Ltd.
   5
   6 /dts-v1/;
   7 #include <dt-bindings/input/input.h>
   8 #include "imx53.dtsi"
   9
  10 / {
  11         model = "Freescale i.MX53 Smart Mobile Reference Design Board";
  12         compatible = "fsl,imx53-smd", "fsl,imx53";
  13
  14         memory@70000000 {
  15                 reg = <0x70000000 0x40000000>;
  16         };
  17
  18         gpio-keys {
  19                 compatible = "gpio-keys";
  20
  21                 volume-up {
  22                         label = "Volume Up";
  23                         gpios = <&gpio2 14 0>;
  24                         linux,code = <KEY_VOLUMEUP>;
  25                 };
  26
  27                 volume-down {
  28                         label = "Volume Down";
  29                         gpios = <&gpio2 15 0>;
  30                         linux,code = <KEY_VOLUMEDOWN>;
  31                 };
  32         };
  33 };
  34
  35 &esdhc1 {
  36         pinctrl-names = "default";
  37         pinctrl-0 = <&pinctrl_esdhc1>;
  38         cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
  39         wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
  40         status = "okay";
  41 };
  42
  43 &esdhc2 {
  44         pinctrl-names = "default";
  45         pinctrl-0 = <&pinctrl_esdhc2>;
  46         non-removable;
  47         status = "okay";
  48 };
  49
  50 &uart3 {
  51         pinctrl-names = "default";
  52         pinctrl-0 = <&pinctrl_uart3>;
  53         uart-has-rtscts;
  54         status = "okay";
  55 };
  56
  57 &ecspi1 {
  58         pinctrl-names = "default";
  59         pinctrl-0 = <&pinctrl_ecspi1>;
  60         cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
  61         status = "okay";
  62
  63         zigbee: mc1323@0 {
  64                 compatible = "fsl,mc1323";
  65                 spi-max-frequency = <8000000>;
  66                 reg = <0>;
  67         };
  68
  69         flash: m25p32@1 {
  70                 #address-cells = <1>;
  71                 #size-cells = <1>;
  72                 compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
  73                 spi-max-frequency = <20000000>;
  74                 reg = <1>;
  75
  76                 partition@0 {
  77                         label = "U-Boot";
  78                         reg = <0x0 0x40000>;
  79                         read-only;
  80                 };
  81
  82                 partition@40000 {
  83                         label = "Kernel";
  84                         reg = <0x40000 0x3c0000>;
  85                 };
  86         };
  87 };
  88
  89 &esdhc3 {
  90         pinctrl-names = "default";
  91         pinctrl-0 = <&pinctrl_esdhc3>;
  92         non-removable;
  93         status = "okay";
  94 };
  95
  96 &iomuxc {
  97         pinctrl-names = "default";
  98         pinctrl-0 = <&pinctrl_hog>;
  99
 100         imx53-smd {
 101                 pinctrl_hog: hoggrp {
 102                         fsl,pins = <
 103                                 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
 104                                 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
 105                                 MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
 106                                 MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
 107                                 MX53_PAD_EIM_D19__GPIO3_19     0x80000000
 108                                 MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
 109                                 MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
 110                         >;
 111                 };
 112
 113                 pinctrl_ecspi1: ecspi1grp {
 114                         fsl,pins = <
 115                                 MX53_PAD_EIM_D16__ECSPI1_SCLK           0x80000000
 116                                 MX53_PAD_EIM_D17__ECSPI1_MISO           0x80000000
 117                                 MX53_PAD_EIM_D18__ECSPI1_MOSI           0x80000000
 118                         >;
 119                 };
 120
 121                 pinctrl_esdhc1: esdhc1grp {
 122                         fsl,pins = <
 123                                 MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
 124                                 MX53_PAD_SD1_DATA1__ESDHC1_DAT1         0x1d5
 125                                 MX53_PAD_SD1_DATA2__ESDHC1_DAT2         0x1d5
 126                                 MX53_PAD_SD1_DATA3__ESDHC1_DAT3         0x1d5
 127                                 MX53_PAD_SD1_CMD__ESDHC1_CMD            0x1d5
 128                                 MX53_PAD_SD1_CLK__ESDHC1_CLK            0x1d5
 129                         >;
 130                 };
 131
 132                 pinctrl_esdhc2: esdhc2grp {
 133                         fsl,pins = <
 134                                 MX53_PAD_SD2_CMD__ESDHC2_CMD            0x1d5
 135                                 MX53_PAD_SD2_CLK__ESDHC2_CLK            0x1d5
 136                                 MX53_PAD_SD2_DATA0__ESDHC2_DAT0         0x1d5
 137                                 MX53_PAD_SD2_DATA1__ESDHC2_DAT1         0x1d5
 138                                 MX53_PAD_SD2_DATA2__ESDHC2_DAT2         0x1d5
 139                                 MX53_PAD_SD2_DATA3__ESDHC2_DAT3         0x1d5
 140                         >;
 141                 };
 142
 143                 pinctrl_esdhc3: esdhc3grp {
 144                         fsl,pins = <
 145                                 MX53_PAD_PATA_DATA8__ESDHC3_DAT0        0x1d5
 146                                 MX53_PAD_PATA_DATA9__ESDHC3_DAT1        0x1d5
 147                                 MX53_PAD_PATA_DATA10__ESDHC3_DAT2       0x1d5
 148                                 MX53_PAD_PATA_DATA11__ESDHC3_DAT3       0x1d5
 149                                 MX53_PAD_PATA_DATA0__ESDHC3_DAT4        0x1d5
 150                                 MX53_PAD_PATA_DATA1__ESDHC3_DAT5        0x1d5
 151                                 MX53_PAD_PATA_DATA2__ESDHC3_DAT6        0x1d5
 152                                 MX53_PAD_PATA_DATA3__ESDHC3_DAT7        0x1d5
 153                                 MX53_PAD_PATA_RESET_B__ESDHC3_CMD       0x1d5
 154                                 MX53_PAD_PATA_IORDY__ESDHC3_CLK         0x1d5
 155                         >;
 156                 };
 157
 158                 pinctrl_fec: fecgrp {
 159                         fsl,pins = <
 160                                 MX53_PAD_FEC_MDC__FEC_MDC               0x80000000
 161                                 MX53_PAD_FEC_MDIO__FEC_MDIO             0x80000000
 162                                 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK        0x80000000
 163                                 MX53_PAD_FEC_RX_ER__FEC_RX_ER           0x80000000
 164                                 MX53_PAD_FEC_CRS_DV__FEC_RX_DV          0x80000000
 165                                 MX53_PAD_FEC_RXD1__FEC_RDATA_1          0x80000000
 166                                 MX53_PAD_FEC_RXD0__FEC_RDATA_0          0x80000000
 167                                 MX53_PAD_FEC_TX_EN__FEC_TX_EN           0x80000000
 168                                 MX53_PAD_FEC_TXD1__FEC_TDATA_1          0x80000000
 169                                 MX53_PAD_FEC_TXD0__FEC_TDATA_0          0x80000000
 170                         >;
 171                 };
 172
 173                 pinctrl_i2c1: i2c1grp {
 174                         fsl,pins = <
 175                                 MX53_PAD_CSI0_DAT8__I2C1_SDA            0xc0000000
 176                                 MX53_PAD_CSI0_DAT9__I2C1_SCL            0xc0000000
 177                         >;
 178                 };
 179
 180                 pinctrl_i2c2: i2c2grp {
 181                         fsl,pins = <
 182                                 MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
 183                                 MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
 184                         >;
 185                 };
 186
 187                 pinctrl_uart1: uart1grp {
 188                         fsl,pins = <
 189                                 MX53_PAD_CSI0_DAT10__UART1_TXD_MUX      0x1e4
 190                                 MX53_PAD_CSI0_DAT11__UART1_RXD_MUX      0x1e4
 191                         >;
 192                 };
 193
 194                 pinctrl_uart2: uart2grp {
 195                         fsl,pins = <
 196                                 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX  0x1e4
 197                                 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX      0x1e4
 198                         >;
 199                 };
 200
 201                 pinctrl_uart3: uart3grp {
 202                         fsl,pins = <
 203                                 MX53_PAD_PATA_CS_0__UART3_TXD_MUX       0x1e4
 204                                 MX53_PAD_PATA_CS_1__UART3_RXD_MUX       0x1e4
 205                                 MX53_PAD_PATA_DA_1__UART3_CTS           0x1e4
 206                                 MX53_PAD_PATA_DA_2__UART3_RTS           0x1e4
 207                         >;
 208                 };
 209         };
 210 };
 211
 212 &uart1 {
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&pinctrl_uart1>;
 215         status = "okay";
 216 };
 217
 218 &uart2 {
 219         pinctrl-names = "default";
 220         pinctrl-0 = <&pinctrl_uart2>;
 221         status = "okay";
 222 };
 223
 224 &i2c2 {
 225         pinctrl-names = "default";
 226         pinctrl-0 = <&pinctrl_i2c2>;
 227         status = "okay";
 228
 229         codec: sgtl5000@a {
 230                 compatible = "fsl,sgtl5000";
 231                 reg = <0x0a>;
 232         };
 233
 234         magnetometer: mag3110@e {
 235                 compatible = "fsl,mag3110";
 236                 reg = <0x0e>;
 237         };
 238
 239         touchkey: mpr121@5a {
 240                 compatible = "fsl,mpr121";
 241                 reg = <0x5a>;
 242         };
 243 };
 244
 245 &i2c1 {
 246         pinctrl-names = "default";
 247         pinctrl-0 = <&pinctrl_i2c1>;
 248         status = "okay";
 249
 250         accelerometer: mma8450@1c {
 251                 compatible = "fsl,mma8450";
 252                 reg = <0x1c>;
 253         };
 254
 255         camera: ov5642@3c {
 256                 compatible = "ovti,ov5642";
 257                 reg = <0x3c>;
 258         };
 259
 260         pmic: dialog@48 {
 261                 compatible = "dlg,da9053", "dlg,da9052";
 262                 reg = <0x48>;
 263         };
 264 };
 265
 266 &fec {
 267         pinctrl-names = "default";
 268         pinctrl-0 = <&pinctrl_fec>;
 269         phy-mode = "rmii";
 270         phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 271         status = "okay";
 272 };