arch/arm/boot/dts/imx35-pdk.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
   4 // Copyright 2014 Freescale Semiconductor, Inc.
   5
   6 /dts-v1/;
   7 #include "imx35.dtsi"
   8
   9 / {
  10         model = "Freescale i.MX35 Product Development Kit";
  11         compatible = "fsl,imx35-pdk", "fsl,imx35";
  12
  13         memory@80000000 {
  14                 reg = <0x80000000 0x8000000>,
  15                       <0x90000000 0x8000000>;
  16         };
  17 };
  18
  19 &esdhc1 {
  20         pinctrl-names = "default";
  21         pinctrl-0 = <&pinctrl_esdhc1>;
  22         status = "okay";
  23 };
  24
  25 &iomuxc {
  26         imx35-pdk {
  27                 pinctrl_esdhc1: esdhc1grp {
  28                         fsl,pins = <
  29                                 MX35_PAD_SD1_CMD__ESDHC1_CMD            0x80000000
  30                                 MX35_PAD_SD1_CLK__ESDHC1_CLK            0x80000000
  31                                 MX35_PAD_SD1_DATA0__ESDHC1_DAT0         0x80000000
  32                                 MX35_PAD_SD1_DATA1__ESDHC1_DAT1         0x80000000
  33                                 MX35_PAD_SD1_DATA2__ESDHC1_DAT2         0x80000000
  34                                 MX35_PAD_SD1_DATA3__ESDHC1_DAT3         0x80000000
  35                         >;
  36                 };
  37
  38                 pinctrl_uart1: uart1grp {
  39                         fsl,pins = <
  40                                 MX35_PAD_TXD1__UART1_TXD_MUX            0x1c5
  41                                 MX35_PAD_RXD1__UART1_RXD_MUX            0x1c5
  42                                 MX35_PAD_CTS1__UART1_CTS                0x1c5
  43                                 MX35_PAD_RTS1__UART1_RTS                0x1c5
  44                         >;
  45                 };
  46         };
  47 };
  48
  49 &nfc {
  50         nand-bus-width = <16>;
  51         nand-ecc-mode = "hw";
  52         nand-on-flash-bbt;
  53         status = "okay";
  54 };
  55
  56 &uart1 {
  57         pinctrl-names = "default";
  58         pinctrl-0 = <&pinctrl_uart1>;
  59         uart-has-rtscts;
  60         status = "okay";
  61 };