arch/arm/boot/dts/imx31.dtsi

   1 /*
   2  * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13
  14 / {
  15         aliases {
  16                 serial0 = &uart1;
  17                 serial1 = &uart2;
  18                 serial2 = &uart3;
  19                 serial3 = &uart4;
  20                 serial4 = &uart5;
  21         };
  22
  23         cpus {
  24                 #address-cells = <0>;
  25                 #size-cells = <0>;
  26
  27                 cpu {
  28                         compatible = "arm,arm1136jf-s";
  29                         device_type = "cpu";
  30                 };
  31         };
  32
  33         avic: avic-interrupt-controller@60000000 {
  34                 compatible = "fsl,imx31-avic", "fsl,avic";
  35                 interrupt-controller;
  36                 #interrupt-cells = <1>;
  37                 reg = <0x60000000 0x100000>;
  38         };
  39
  40         soc {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "simple-bus";
  44                 interrupt-parent = <&avic>;
  45                 ranges;
  46
  47                 aips@43f00000 { /* AIPS1 */
  48                         compatible = "fsl,aips-bus", "simple-bus";
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51                         reg = <0x43f00000 0x100000>;
  52                         ranges;
  53
  54                         uart1: serial@43f90000 {
  55                                 compatible = "fsl,imx31-uart", "fsl,imx21-uart";
  56                                 reg = <0x43f90000 0x4000>;
  57                                 interrupts = <45>;
  58                                 clocks = <&clks 10>, <&clks 30>;
  59                                 clock-names = "ipg", "per";
  60                                 status = "disabled";
  61                         };
  62
  63                         uart2: serial@43f94000 {
  64                                 compatible = "fsl,imx31-uart", "fsl,imx21-uart";
  65                                 reg = <0x43f94000 0x4000>;
  66                                 interrupts = <32>;
  67                                 clocks = <&clks 10>, <&clks 31>;
  68                                 clock-names = "ipg", "per";
  69                                 status = "disabled";
  70                         };
  71
  72                         kpp: kpp@43fa8000 {
  73                                 compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
  74                                 reg = <0x43fa8000 0x4000>;
  75                                 interrupts = <24>;
  76                                 clocks = <&clks 46>;
  77                                 status = "disabled";
  78                         };
  79
  80                         uart4: serial@43fb0000 {
  81                                 compatible = "fsl,imx31-uart", "fsl,imx21-uart";
  82                                 reg = <0x43fb0000 0x4000>;
  83                                 clocks = <&clks 10>, <&clks 49>;
  84                                 clock-names = "ipg", "per";
  85                                 interrupts = <46>;
  86                                 status = "disabled";
  87                         };
  88
  89                         uart5: serial@43fb4000 {
  90                                 compatible = "fsl,imx31-uart", "fsl,imx21-uart";
  91                                 reg = <0x43fb4000 0x4000>;
  92                                 interrupts = <47>;
  93                                 clocks = <&clks 10>, <&clks 50>;
  94                                 clock-names = "ipg", "per";
  95                                 status = "disabled";
  96                         };
  97                 };
  98
  99                 spba@50000000 {
 100                         compatible = "fsl,spba-bus", "simple-bus";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103                         reg = <0x50000000 0x100000>;
 104                         ranges;
 105
 106                         uart3: serial@5000c000 {
 107                                 compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 108                                 reg = <0x5000c000 0x4000>;
 109                                 interrupts = <18>;
 110                                 clocks = <&clks 10>, <&clks 48>;
 111                                 clock-names = "ipg", "per";
 112                                 status = "disabled";
 113                         };
 114
 115                         iim: iim@5001c000 {
 116                                 compatible = "fsl,imx31-iim", "fsl,imx27-iim";
 117                                 reg = <0x5001c000 0x1000>;
 118                                 interrupts = <19>;
 119                                 clocks = <&clks 25>;
 120                         };
 121
 122                         clks: ccm@53f80000{
 123                                 compatible = "fsl,imx31-ccm";
 124                                 reg = <0x53f80000 0x4000>;
 125                                 interrupts = <0 31 0x04 0 53 0x04>;
 126                                 #clock-cells = <1>;
 127                         };
 128                 };
 129
 130                 aips@53f00000 { /* AIPS2 */
 131                         compatible = "fsl,aips-bus", "simple-bus";
 132                         #address-cells = <1>;
 133                         #size-cells = <1>;
 134                         reg = <0x53f00000 0x100000>;
 135                         ranges;
 136
 137                         gpt: timer@53f90000 {
 138                                 compatible = "fsl,imx31-gpt";
 139                                 reg = <0x53f90000 0x4000>;
 140                                 interrupts = <29>;
 141                                 clocks = <&clks 10>, <&clks 22>;
 142                                 clock-names = "ipg", "per";
 143                         };
 144                 };
 145         };
 146 };