arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include "imx28-pinfunc.h"
  14
  15 / {
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         interrupt-parent = <&icoll>;
  20         /*
  21          * The decompressor and also some bootloaders rely on a
  22          * pre-existing /chosen node to be available to insert the
  23          * command line and merge other ATAGS info.
  24          * Also for U-Boot there must be a pre-existing /memory node.
  25          */
  26         chosen {};
  27         memory { device_type = "memory"; reg = <0 0>; };
  28
  29         aliases {
  30                 ethernet0 = &mac0;
  31                 ethernet1 = &mac1;
  32                 gpio0 = &gpio0;
  33                 gpio1 = &gpio1;
  34                 gpio2 = &gpio2;
  35                 gpio3 = &gpio3;
  36                 gpio4 = &gpio4;
  37                 saif0 = &saif0;
  38                 saif1 = &saif1;
  39                 serial0 = &auart0;
  40                 serial1 = &auart1;
  41                 serial2 = &auart2;
  42                 serial3 = &auart3;
  43                 serial4 = &auart4;
  44                 spi0 = &ssp1;
  45                 spi1 = &ssp2;
  46                 usbphy0 = &usbphy0;
  47                 usbphy1 = &usbphy1;
  48         };
  49
  50         cpus {
  51                 #address-cells = <1>;
  52                 #size-cells = <0>;
  53
  54                 cpu@0 {
  55                         compatible = "arm,arm926ej-s";
  56                         device_type = "cpu";
  57                         reg = <0>;
  58                 };
  59         };
  60
  61         apb@80000000 {
  62                 compatible = "simple-bus";
  63                 #address-cells = <1>;
  64                 #size-cells = <1>;
  65                 reg = <0x80000000 0x80000>;
  66                 ranges;
  67
  68                 apbh@80000000 {
  69                         compatible = "simple-bus";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72                         reg = <0x80000000 0x3c900>;
  73                         ranges;
  74
  75                         icoll: interrupt-controller@80000000 {
  76                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  77                                 interrupt-controller;
  78                                 #interrupt-cells = <1>;
  79                                 reg = <0x80000000 0x2000>;
  80                         };
  81
  82                         hsadc: hsadc@80002000 {
  83                                 reg = <0x80002000 0x2000>;
  84                                 interrupts = <13>;
  85                                 dmas = <&dma_apbh 12>;
  86                                 dma-names = "rx";
  87                                 status = "disabled";
  88                         };
  89
  90                         dma_apbh: dma-apbh@80004000 {
  91                                 compatible = "fsl,imx28-dma-apbh";
  92                                 reg = <0x80004000 0x2000>;
  93                                 interrupts = <82 83 84 85
  94                                               88 88 88 88
  95                                               88 88 88 88
  96                                               87 86 0 0>;
  97                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  98                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  99                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
 100                                                   "hsadc", "lcdif", "empty", "empty";
 101                                 #dma-cells = <1>;
 102                                 dma-channels = <16>;
 103                                 clocks = <&clks 25>;
 104                         };
 105
 106                         perfmon: perfmon@80006000 {
 107                                 reg = <0x80006000 0x800>;
 108                                 interrupts = <27>;
 109                                 status = "disabled";
 110                         };
 111
 112                         gpmi: gpmi-nand@8000c000 {
 113                                 compatible = "fsl,imx28-gpmi-nand";
 114                                 #address-cells = <1>;
 115                                 #size-cells = <1>;
 116                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 117                                 reg-names = "gpmi-nand", "bch";
 118                                 interrupts = <41>;
 119                                 interrupt-names = "bch";
 120                                 clocks = <&clks 50>;
 121                                 clock-names = "gpmi_io";
 122                                 dmas = <&dma_apbh 4>;
 123                                 dma-names = "rx-tx";
 124                                 status = "disabled";
 125                         };
 126
 127                         ssp0: ssp@80010000 {
 128                                 #address-cells = <1>;
 129                                 #size-cells = <0>;
 130                                 reg = <0x80010000 0x2000>;
 131                                 interrupts = <96>;
 132                                 clocks = <&clks 46>;
 133                                 dmas = <&dma_apbh 0>;
 134                                 dma-names = "rx-tx";
 135                                 status = "disabled";
 136                         };
 137
 138                         ssp1: ssp@80012000 {
 139                                 #address-cells = <1>;
 140                                 #size-cells = <0>;
 141                                 reg = <0x80012000 0x2000>;
 142                                 interrupts = <97>;
 143                                 clocks = <&clks 47>;
 144                                 dmas = <&dma_apbh 1>;
 145                                 dma-names = "rx-tx";
 146                                 status = "disabled";
 147                         };
 148
 149                         ssp2: ssp@80014000 {
 150                                 #address-cells = <1>;
 151                                 #size-cells = <0>;
 152                                 reg = <0x80014000 0x2000>;
 153                                 interrupts = <98>;
 154                                 clocks = <&clks 48>;
 155                                 dmas = <&dma_apbh 2>;
 156                                 dma-names = "rx-tx";
 157                                 status = "disabled";
 158                         };
 159
 160                         ssp3: ssp@80016000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 reg = <0x80016000 0x2000>;
 164                                 interrupts = <99>;
 165                                 clocks = <&clks 49>;
 166                                 dmas = <&dma_apbh 3>;
 167                                 dma-names = "rx-tx";
 168                                 status = "disabled";
 169                         };
 170
 171                         pinctrl: pinctrl@80018000 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 175                                 reg = <0x80018000 0x2000>;
 176
 177                                 gpio0: gpio@0 {
 178                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 179                                         reg = <0>;
 180                                         interrupts = <127>;
 181                                         gpio-controller;
 182                                         #gpio-cells = <2>;
 183                                         interrupt-controller;
 184                                         #interrupt-cells = <2>;
 185                                 };
 186
 187                                 gpio1: gpio@1 {
 188                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 189                                         reg = <1>;
 190                                         interrupts = <126>;
 191                                         gpio-controller;
 192                                         #gpio-cells = <2>;
 193                                         interrupt-controller;
 194                                         #interrupt-cells = <2>;
 195                                 };
 196
 197                                 gpio2: gpio@2 {
 198                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 199                                         reg = <2>;
 200                                         interrupts = <125>;
 201                                         gpio-controller;
 202                                         #gpio-cells = <2>;
 203                                         interrupt-controller;
 204                                         #interrupt-cells = <2>;
 205                                 };
 206
 207                                 gpio3: gpio@3 {
 208                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 209                                         reg = <3>;
 210                                         interrupts = <124>;
 211                                         gpio-controller;
 212                                         #gpio-cells = <2>;
 213                                         interrupt-controller;
 214                                         #interrupt-cells = <2>;
 215                                 };
 216
 217                                 gpio4: gpio@4 {
 218                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 219                                         reg = <4>;
 220                                         interrupts = <123>;
 221                                         gpio-controller;
 222                                         #gpio-cells = <2>;
 223                                         interrupt-controller;
 224                                         #interrupt-cells = <2>;
 225                                 };
 226
 227                                 duart_pins_a: duart@0 {
 228                                         reg = <0>;
 229                                         fsl,pinmux-ids = <
 230                                                 MX28_PAD_PWM0__DUART_RX
 231                                                 MX28_PAD_PWM1__DUART_TX
 232                                         >;
 233                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 234                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 235                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 236                                 };
 237
 238                                 duart_pins_b: duart@1 {
 239                                         reg = <1>;
 240                                         fsl,pinmux-ids = <
 241                                                 MX28_PAD_AUART0_CTS__DUART_RX
 242                                                 MX28_PAD_AUART0_RTS__DUART_TX
 243                                         >;
 244                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 245                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 246                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 247                                 };
 248
 249                                 duart_4pins_a: duart-4pins@0 {
 250                                         reg = <0>;
 251                                         fsl,pinmux-ids = <
 252                                                 MX28_PAD_AUART0_CTS__DUART_RX
 253                                                 MX28_PAD_AUART0_RTS__DUART_TX
 254                                                 MX28_PAD_AUART0_RX__DUART_CTS
 255                                                 MX28_PAD_AUART0_TX__DUART_RTS
 256                                         >;
 257                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 258                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 259                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 260                                 };
 261
 262                                 gpmi_pins_a: gpmi-nand@0 {
 263                                         reg = <0>;
 264                                         fsl,pinmux-ids = <
 265                                                 MX28_PAD_GPMI_D00__GPMI_D0
 266                                                 MX28_PAD_GPMI_D01__GPMI_D1
 267                                                 MX28_PAD_GPMI_D02__GPMI_D2
 268                                                 MX28_PAD_GPMI_D03__GPMI_D3
 269                                                 MX28_PAD_GPMI_D04__GPMI_D4
 270                                                 MX28_PAD_GPMI_D05__GPMI_D5
 271                                                 MX28_PAD_GPMI_D06__GPMI_D6
 272                                                 MX28_PAD_GPMI_D07__GPMI_D7
 273                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 274                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 275                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 276                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 277                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 278                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 279                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 280                                         >;
 281                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 282                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 283                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 284                                 };
 285
 286                                 gpmi_status_cfg: gpmi-status-cfg {
 287                                         fsl,pinmux-ids = <
 288                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 289                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 290                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 291                                         >;
 292                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 293                                 };
 294
 295                                 auart0_pins_a: auart0@0 {
 296                                         reg = <0>;
 297                                         fsl,pinmux-ids = <
 298                                                 MX28_PAD_AUART0_RX__AUART0_RX
 299                                                 MX28_PAD_AUART0_TX__AUART0_TX
 300                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 301                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 302                                         >;
 303                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 304                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 305                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 306                                 };
 307
 308                                 auart0_2pins_a: auart0-2pins@0 {
 309                                         reg = <0>;
 310                                         fsl,pinmux-ids = <
 311                                                 MX28_PAD_AUART0_RX__AUART0_RX
 312                                                 MX28_PAD_AUART0_TX__AUART0_TX
 313                                         >;
 314                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 315                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 316                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 317                                 };
 318
 319                                 auart1_pins_a: auart1@0 {
 320                                         reg = <0>;
 321                                         fsl,pinmux-ids = <
 322                                                 MX28_PAD_AUART1_RX__AUART1_RX
 323                                                 MX28_PAD_AUART1_TX__AUART1_TX
 324                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 325                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 326                                         >;
 327                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 328                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 329                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 330                                 };
 331
 332                                 auart1_2pins_a: auart1-2pins@0 {
 333                                         reg = <0>;
 334                                         fsl,pinmux-ids = <
 335                                                 MX28_PAD_AUART1_RX__AUART1_RX
 336                                                 MX28_PAD_AUART1_TX__AUART1_TX
 337                                         >;
 338                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 339                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 340                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 341                                 };
 342
 343                                 auart2_2pins_a: auart2-2pins@0 {
 344                                         reg = <0>;
 345                                         fsl,pinmux-ids = <
 346                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 347                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 348                                         >;
 349                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 350                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 351                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 352                                 };
 353
 354                                 auart2_2pins_b: auart2-2pins@1 {
 355                                         reg = <1>;
 356                                         fsl,pinmux-ids = <
 357                                                 MX28_PAD_AUART2_RX__AUART2_RX
 358                                                 MX28_PAD_AUART2_TX__AUART2_TX
 359                                         >;
 360                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 361                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 362                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 363                                 };
 364
 365                                 auart2_pins_a: auart2-pins@0 {
 366                                         reg = <0>;
 367                                         fsl,pinmux-ids = <
 368                                                 MX28_PAD_AUART2_RX__AUART2_RX
 369                                                 MX28_PAD_AUART2_TX__AUART2_TX
 370                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
 371                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
 372                                         >;
 373                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 374                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 375                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 376                                 };
 377
 378                                 auart3_pins_a: auart3@0 {
 379                                         reg = <0>;
 380                                         fsl,pinmux-ids = <
 381                                                 MX28_PAD_AUART3_RX__AUART3_RX
 382                                                 MX28_PAD_AUART3_TX__AUART3_TX
 383                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 384                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 385                                         >;
 386                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 387                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 388                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 389                                 };
 390
 391                                 auart3_2pins_a: auart3-2pins@0 {
 392                                         reg = <0>;
 393                                         fsl,pinmux-ids = <
 394                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 395                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 396                                         >;
 397                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 398                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 399                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 400                                 };
 401
 402                                 auart3_2pins_b: auart3-2pins@1 {
 403                                         reg = <1>;
 404                                         fsl,pinmux-ids = <
 405                                                 MX28_PAD_AUART3_RX__AUART3_RX
 406                                                 MX28_PAD_AUART3_TX__AUART3_TX
 407                                         >;
 408                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 409                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 410                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 411                                 };
 412
 413                                 auart4_2pins_a: auart4@0 {
 414                                         reg = <0>;
 415                                         fsl,pinmux-ids = <
 416                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 417                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 418                                         >;
 419                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 420                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 421                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 422                                 };
 423
 424                                 auart4_2pins_b: auart4@1 {
 425                                         reg = <1>;
 426                                         fsl,pinmux-ids = <
 427                                                 MX28_PAD_AUART0_CTS__AUART4_RX
 428                                                 MX28_PAD_AUART0_RTS__AUART4_TX
 429                                         >;
 430                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 431                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 432                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 433                                 };
 434
 435                                 mac0_pins_a: mac0@0 {
 436                                         reg = <0>;
 437                                         fsl,pinmux-ids = <
 438                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 439                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 440                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 441                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 442                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 443                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 444                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 445                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 446                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 447                                         >;
 448                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 449                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 450                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 451                                 };
 452
 453                                 mac0_pins_b: mac0@1 {
 454                                         reg = <1>;
 455                                         fsl,pinmux-ids = <
 456                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 457                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 458                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 459                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 460                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 461                                                 MX28_PAD_ENET0_RXD2__ENET0_RXD2
 462                                                 MX28_PAD_ENET0_RXD3__ENET0_RXD3
 463                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 464                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 465                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 466                                                 MX28_PAD_ENET0_TXD2__ENET0_TXD2
 467                                                 MX28_PAD_ENET0_TXD3__ENET0_TXD3
 468                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 469                                                 MX28_PAD_ENET0_COL__ENET0_COL
 470                                                 MX28_PAD_ENET0_CRS__ENET0_CRS
 471                                                 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
 472                                                 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
 473                                                 >;
 474                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 475                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 476                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 477                                 };
 478
 479                                 mac1_pins_a: mac1@0 {
 480                                         reg = <0>;
 481                                         fsl,pinmux-ids = <
 482                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 483                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 484                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 485                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 486                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 487                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 488                                         >;
 489                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 490                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 491                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 492                                 };
 493
 494                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 495                                         reg = <0>;
 496                                         fsl,pinmux-ids = <
 497                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 498                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 499                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 500                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 501                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 502                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 503                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 504                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 505                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 506                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 507                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 508                                         >;
 509                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 510                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 511                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 512                                 };
 513
 514                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 515                                         reg = <0>;
 516                                         fsl,pinmux-ids = <
 517                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 518                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 519                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 520                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 521                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 522                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 523                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 524                                         >;
 525                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 526                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 527                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 528                                 };
 529
 530                                 mmc0_cd_cfg: mmc0-cd-cfg {
 531                                         fsl,pinmux-ids = <
 532                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 533                                         >;
 534                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 535                                 };
 536
 537                                 mmc0_sck_cfg: mmc0-sck-cfg {
 538                                         fsl,pinmux-ids = <
 539                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 540                                         >;
 541                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 542                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 543                                 };
 544
 545                                 mmc1_4bit_pins_a: mmc1-4bit@0 {
 546                                         reg = <0>;
 547                                         fsl,pinmux-ids = <
 548                                                 MX28_PAD_GPMI_D00__SSP1_D0
 549                                                 MX28_PAD_GPMI_D01__SSP1_D1
 550                                                 MX28_PAD_GPMI_D02__SSP1_D2
 551                                                 MX28_PAD_GPMI_D03__SSP1_D3
 552                                                 MX28_PAD_GPMI_RDY1__SSP1_CMD
 553                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 554                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 555                                         >;
 556                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 557                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 558                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 559                                 };
 560
 561                                 mmc1_cd_cfg: mmc1-cd-cfg {
 562                                         fsl,pinmux-ids = <
 563                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 564                                         >;
 565                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 566                                 };
 567
 568                                 mmc1_sck_cfg: mmc1-sck-cfg {
 569                                         fsl,pinmux-ids = <
 570                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 571                                         >;
 572                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 573                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 574                                 };
 575
 576
 577                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 578                                         reg = <0>;
 579                                         fsl,pinmux-ids = <
 580                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 581                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 582                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 583                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 584                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 585                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 586                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 587                                         >;
 588                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 589                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 590                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 591                                 };
 592
 593                                 mmc2_4bit_pins_b: mmc2-4bit@1 {
 594                                         reg = <1>;
 595                                         fsl,pinmux-ids = <
 596                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 597                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 598                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 599                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 600                                                 MX28_PAD_SSP2_SS1__SSP2_D1
 601                                                 MX28_PAD_SSP2_SS2__SSP2_D2
 602                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 603                                         >;
 604                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 605                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 606                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 607                                 };
 608
 609                                 mmc2_cd_cfg: mmc2-cd-cfg {
 610                                         fsl,pinmux-ids = <
 611                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 612                                         >;
 613                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 614                                 };
 615
 616                                 mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
 617                                         reg = <0>;
 618                                         fsl,pinmux-ids = <
 619                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 620                                         >;
 621                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 622                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 623                                 };
 624
 625                                 mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
 626                                         reg = <1>;
 627                                         fsl,pinmux-ids = <
 628                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 629                                         >;
 630                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 631                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 632                                 };
 633
 634                                 i2c0_pins_a: i2c0@0 {
 635                                         reg = <0>;
 636                                         fsl,pinmux-ids = <
 637                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 638                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 639                                         >;
 640                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 641                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 642                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 643                                 };
 644
 645                                 i2c0_pins_b: i2c0@1 {
 646                                         reg = <1>;
 647                                         fsl,pinmux-ids = <
 648                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 649                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 650                                         >;
 651                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 652                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 653                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 654                                 };
 655
 656                                 i2c1_pins_a: i2c1@0 {
 657                                         reg = <0>;
 658                                         fsl,pinmux-ids = <
 659                                                 MX28_PAD_PWM0__I2C1_SCL
 660                                                 MX28_PAD_PWM1__I2C1_SDA
 661                                         >;
 662                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 663                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 664                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 665                                 };
 666
 667                                 i2c1_pins_b: i2c1@1 {
 668                                         reg = <1>;
 669                                         fsl,pinmux-ids = <
 670                                                 MX28_PAD_AUART2_CTS__I2C1_SCL
 671                                                 MX28_PAD_AUART2_RTS__I2C1_SDA
 672                                         >;
 673                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 674                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 675                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 676                                 };
 677
 678                                 saif0_pins_a: saif0@0 {
 679                                         reg = <0>;
 680                                         fsl,pinmux-ids = <
 681                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 682                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 683                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 684                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 685                                         >;
 686                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 687                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 688                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 689                                 };
 690
 691                                 saif0_pins_b: saif0@1 {
 692                                         reg = <1>;
 693                                         fsl,pinmux-ids = <
 694                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 695                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 696                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 697                                         >;
 698                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 699                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 700                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 701                                 };
 702
 703                                 saif1_pins_a: saif1@0 {
 704                                         reg = <0>;
 705                                         fsl,pinmux-ids = <
 706                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 707                                         >;
 708                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 709                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 710                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 711                                 };
 712
 713                                 pwm0_pins_a: pwm0@0 {
 714                                         reg = <0>;
 715                                         fsl,pinmux-ids = <
 716                                                 MX28_PAD_PWM0__PWM_0
 717                                         >;
 718                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 719                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 720                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 721                                 };
 722
 723                                 pwm2_pins_a: pwm2@0 {
 724                                         reg = <0>;
 725                                         fsl,pinmux-ids = <
 726                                                 MX28_PAD_PWM2__PWM_2
 727                                         >;
 728                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 729                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 730                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 731                                 };
 732
 733                                 pwm3_pins_a: pwm3@0 {
 734                                         reg = <0>;
 735                                         fsl,pinmux-ids = <
 736                                                 MX28_PAD_PWM3__PWM_3
 737                                         >;
 738                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 739                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 740                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 741                                 };
 742
 743                                 pwm3_pins_b: pwm3@1 {
 744                                         reg = <1>;
 745                                         fsl,pinmux-ids = <
 746                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 747                                         >;
 748                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 749                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 750                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 751                                 };
 752
 753                                 pwm4_pins_a: pwm4@0 {
 754                                         reg = <0>;
 755                                         fsl,pinmux-ids = <
 756                                                 MX28_PAD_PWM4__PWM_4
 757                                         >;
 758                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 759                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 760                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 761                                 };
 762
 763                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 764                                         reg = <0>;
 765                                         fsl,pinmux-ids = <
 766                                                 MX28_PAD_LCD_D00__LCD_D0
 767                                                 MX28_PAD_LCD_D01__LCD_D1
 768                                                 MX28_PAD_LCD_D02__LCD_D2
 769                                                 MX28_PAD_LCD_D03__LCD_D3
 770                                                 MX28_PAD_LCD_D04__LCD_D4
 771                                                 MX28_PAD_LCD_D05__LCD_D5
 772                                                 MX28_PAD_LCD_D06__LCD_D6
 773                                                 MX28_PAD_LCD_D07__LCD_D7
 774                                                 MX28_PAD_LCD_D08__LCD_D8
 775                                                 MX28_PAD_LCD_D09__LCD_D9
 776                                                 MX28_PAD_LCD_D10__LCD_D10
 777                                                 MX28_PAD_LCD_D11__LCD_D11
 778                                                 MX28_PAD_LCD_D12__LCD_D12
 779                                                 MX28_PAD_LCD_D13__LCD_D13
 780                                                 MX28_PAD_LCD_D14__LCD_D14
 781                                                 MX28_PAD_LCD_D15__LCD_D15
 782                                                 MX28_PAD_LCD_D16__LCD_D16
 783                                                 MX28_PAD_LCD_D17__LCD_D17
 784                                                 MX28_PAD_LCD_D18__LCD_D18
 785                                                 MX28_PAD_LCD_D19__LCD_D19
 786                                                 MX28_PAD_LCD_D20__LCD_D20
 787                                                 MX28_PAD_LCD_D21__LCD_D21
 788                                                 MX28_PAD_LCD_D22__LCD_D22
 789                                                 MX28_PAD_LCD_D23__LCD_D23
 790                                         >;
 791                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 792                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 793                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 794                                 };
 795
 796                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
 797                                         reg = <0>;
 798                                         fsl,pinmux-ids = <
 799                                                 MX28_PAD_LCD_D00__LCD_D0
 800                                                 MX28_PAD_LCD_D01__LCD_D1
 801                                                 MX28_PAD_LCD_D02__LCD_D2
 802                                                 MX28_PAD_LCD_D03__LCD_D3
 803                                                 MX28_PAD_LCD_D04__LCD_D4
 804                                                 MX28_PAD_LCD_D05__LCD_D5
 805                                                 MX28_PAD_LCD_D06__LCD_D6
 806                                                 MX28_PAD_LCD_D07__LCD_D7
 807                                                 MX28_PAD_LCD_D08__LCD_D8
 808                                                 MX28_PAD_LCD_D09__LCD_D9
 809                                                 MX28_PAD_LCD_D10__LCD_D10
 810                                                 MX28_PAD_LCD_D11__LCD_D11
 811                                                 MX28_PAD_LCD_D12__LCD_D12
 812                                                 MX28_PAD_LCD_D13__LCD_D13
 813                                                 MX28_PAD_LCD_D14__LCD_D14
 814                                                 MX28_PAD_LCD_D15__LCD_D15
 815                                                 MX28_PAD_LCD_D16__LCD_D16
 816                                                 MX28_PAD_LCD_D17__LCD_D17
 817                                         >;
 818                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 819                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 820                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 821                                 };
 822
 823                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 824                                         reg = <0>;
 825                                         fsl,pinmux-ids = <
 826                                                 MX28_PAD_LCD_D00__LCD_D0
 827                                                 MX28_PAD_LCD_D01__LCD_D1
 828                                                 MX28_PAD_LCD_D02__LCD_D2
 829                                                 MX28_PAD_LCD_D03__LCD_D3
 830                                                 MX28_PAD_LCD_D04__LCD_D4
 831                                                 MX28_PAD_LCD_D05__LCD_D5
 832                                                 MX28_PAD_LCD_D06__LCD_D6
 833                                                 MX28_PAD_LCD_D07__LCD_D7
 834                                                 MX28_PAD_LCD_D08__LCD_D8
 835                                                 MX28_PAD_LCD_D09__LCD_D9
 836                                                 MX28_PAD_LCD_D10__LCD_D10
 837                                                 MX28_PAD_LCD_D11__LCD_D11
 838                                                 MX28_PAD_LCD_D12__LCD_D12
 839                                                 MX28_PAD_LCD_D13__LCD_D13
 840                                                 MX28_PAD_LCD_D14__LCD_D14
 841                                                 MX28_PAD_LCD_D15__LCD_D15
 842                                         >;
 843                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 844                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 845                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 846                                 };
 847
 848                                 lcdif_sync_pins_a: lcdif-sync@0 {
 849                                         reg = <0>;
 850                                         fsl,pinmux-ids = <
 851                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 852                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 853                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 854                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 855                                         >;
 856                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 857                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 858                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 859                                 };
 860
 861                                 can0_pins_a: can0@0 {
 862                                         reg = <0>;
 863                                         fsl,pinmux-ids = <
 864                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 865                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 866                                         >;
 867                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 868                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 869                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 870                                 };
 871
 872                                 can1_pins_a: can1@0 {
 873                                         reg = <0>;
 874                                         fsl,pinmux-ids = <
 875                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 876                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 877                                         >;
 878                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 879                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 880                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 881                                 };
 882
 883                                 spi2_pins_a: spi2@0 {
 884                                         reg = <0>;
 885                                         fsl,pinmux-ids = <
 886                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 887                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 888                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 889                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 890                                         >;
 891                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 892                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 893                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 894                                 };
 895
 896                                 spi3_pins_a: spi3@0 {
 897                                         reg = <0>;
 898                                         fsl,pinmux-ids = <
 899                                                 MX28_PAD_AUART2_RX__SSP3_D4
 900                                                 MX28_PAD_AUART2_TX__SSP3_D5
 901                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 902                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 903                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 904                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 905                                         >;
 906                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 907                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 908                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 909                                 };
 910
 911                                 spi3_pins_b: spi3@1 {
 912                                         reg = <1>;
 913                                         fsl,pinmux-ids = <
 914                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 915                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 916                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 917                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 918                                         >;
 919                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 920                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 921                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 922                                 };
 923
 924                                 usb0_pins_a: usb0@0 {
 925                                         reg = <0>;
 926                                         fsl,pinmux-ids = <
 927                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 928                                         >;
 929                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 930                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 931                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 932                                 };
 933
 934                                 usb0_pins_b: usb0@1 {
 935                                         reg = <1>;
 936                                         fsl,pinmux-ids = <
 937                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 938                                         >;
 939                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 940                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 941                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 942                                 };
 943
 944                                 usb1_pins_a: usb1@0 {
 945                                         reg = <0>;
 946                                         fsl,pinmux-ids = <
 947                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 948                                         >;
 949                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 950                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 951                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 952                                 };
 953
 954                                 usb0_id_pins_a: usb0id@0 {
 955                                         reg = <0>;
 956                                         fsl,pinmux-ids = <
 957                                                 MX28_PAD_AUART1_RTS__USB0_ID
 958                                         >;
 959                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 960                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 961                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 962                                 };
 963
 964                                 usb0_id_pins_b: usb0id1@0 {
 965                                         reg = <0>;
 966                                         fsl,pinmux-ids = <
 967                                                 MX28_PAD_PWM2__USB0_ID
 968                                         >;
 969                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 970                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 971                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 972                                 };
 973
 974                         };
 975
 976                         digctl: digctl@8001c000 {
 977                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 978                                 reg = <0x8001c000 0x2000>;
 979                                 interrupts = <89>;
 980                                 status = "disabled";
 981                         };
 982
 983                         etm: etm@80022000 {
 984                                 reg = <0x80022000 0x2000>;
 985                                 status = "disabled";
 986                         };
 987
 988                         dma_apbx: dma-apbx@80024000 {
 989                                 compatible = "fsl,imx28-dma-apbx";
 990                                 reg = <0x80024000 0x2000>;
 991                                 interrupts = <78 79 66 0
 992                                               80 81 68 69
 993                                               70 71 72 73
 994                                               74 75 76 77>;
 995                                 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 996                                                   "saif0", "saif1", "i2c0", "i2c1",
 997                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 998                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 999                                 #dma-cells = <1>;
1000                                 dma-channels = <16>;
1001                                 clocks = <&clks 26>;
1002                         };
1003
1004                         dcp: dcp@80028000 {
1005                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
1006                                 reg = <0x80028000 0x2000>;
1007                                 interrupts = <52 53 54>;
1008                                 status = "okay";
1009                         };
1010
1011                         pxp: pxp@8002a000 {
1012                                 reg = <0x8002a000 0x2000>;
1013                                 interrupts = <39>;
1014                                 status = "disabled";
1015                         };
1016
1017                         ocotp: ocotp@8002c000 {
1018                                 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
1019                                 #address-cells = <1>;
1020                                 #size-cells = <1>;
1021                                 reg = <0x8002c000 0x2000>;
1022                                 clocks = <&clks 25>;
1023                         };
1024
1025                         axi-ahb@8002e000 {
1026                                 reg = <0x8002e000 0x2000>;
1027                                 status = "disabled";
1028                         };
1029
1030                         lcdif: lcdif@80030000 {
1031                                 compatible = "fsl,imx28-lcdif";
1032                                 reg = <0x80030000 0x2000>;
1033                                 interrupts = <38>;
1034                                 clocks = <&clks 55>;
1035                                 dmas = <&dma_apbh 13>;
1036                                 dma-names = "rx";
1037                                 status = "disabled";
1038                         };
1039
1040                         can0: can@80032000 {
1041                                 compatible = "fsl,imx28-flexcan";
1042                                 reg = <0x80032000 0x2000>;
1043                                 interrupts = <8>;
1044                                 clocks = <&clks 58>, <&clks 58>;
1045                                 clock-names = "ipg", "per";
1046                                 status = "disabled";
1047                         };
1048
1049                         can1: can@80034000 {
1050                                 compatible = "fsl,imx28-flexcan";
1051                                 reg = <0x80034000 0x2000>;
1052                                 interrupts = <9>;
1053                                 clocks = <&clks 59>, <&clks 59>;
1054                                 clock-names = "ipg", "per";
1055                                 status = "disabled";
1056                         };
1057
1058                         simdbg: simdbg@8003c000 {
1059                                 reg = <0x8003c000 0x200>;
1060                                 status = "disabled";
1061                         };
1062
1063                         simgpmisel: simgpmisel@8003c200 {
1064                                 reg = <0x8003c200 0x100>;
1065                                 status = "disabled";
1066                         };
1067
1068                         simsspsel: simsspsel@8003c300 {
1069                                 reg = <0x8003c300 0x100>;
1070                                 status = "disabled";
1071                         };
1072
1073                         simmemsel: simmemsel@8003c400 {
1074                                 reg = <0x8003c400 0x100>;
1075                                 status = "disabled";
1076                         };
1077
1078                         gpiomon: gpiomon@8003c500 {
1079                                 reg = <0x8003c500 0x100>;
1080                                 status = "disabled";
1081                         };
1082
1083                         simenet: simenet@8003c700 {
1084                                 reg = <0x8003c700 0x100>;
1085                                 status = "disabled";
1086                         };
1087
1088                         armjtag: armjtag@8003c800 {
1089                                 reg = <0x8003c800 0x100>;
1090                                 status = "disabled";
1091                         };
1092                 };
1093
1094                 apbx@80040000 {
1095                         compatible = "simple-bus";
1096                         #address-cells = <1>;
1097                         #size-cells = <1>;
1098                         reg = <0x80040000 0x40000>;
1099                         ranges;
1100
1101                         clks: clkctrl@80040000 {
1102                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1103                                 reg = <0x80040000 0x2000>;
1104                                 #clock-cells = <1>;
1105                         };
1106
1107                         saif0: saif@80042000 {
1108                                 #sound-dai-cells = <0>;
1109                                 compatible = "fsl,imx28-saif";
1110                                 reg = <0x80042000 0x2000>;
1111                                 interrupts = <59>;
1112                                 #clock-cells = <0>;
1113                                 clocks = <&clks 53>;
1114                                 dmas = <&dma_apbx 4>;
1115                                 dma-names = "rx-tx";
1116                                 status = "disabled";
1117                         };
1118
1119                         power: power@80044000 {
1120                                 reg = <0x80044000 0x2000>;
1121                                 status = "disabled";
1122                         };
1123
1124                         saif1: saif@80046000 {
1125                                 #sound-dai-cells = <0>;
1126                                 compatible = "fsl,imx28-saif";
1127                                 reg = <0x80046000 0x2000>;
1128                                 interrupts = <58>;
1129                                 clocks = <&clks 54>;
1130                                 dmas = <&dma_apbx 5>;
1131                                 dma-names = "rx-tx";
1132                                 status = "disabled";
1133                         };
1134
1135                         lradc: lradc@80050000 {
1136                                 compatible = "fsl,imx28-lradc";
1137                                 reg = <0x80050000 0x2000>;
1138                                 interrupts = <10 14 15 16 17 18 19
1139                                                 20 21 22 23 24 25>;
1140                                 status = "disabled";
1141                                 clocks = <&clks 41>;
1142                                 #io-channel-cells = <1>;
1143                         };
1144
1145                         spdif: spdif@80054000 {
1146                                 reg = <0x80054000 0x2000>;
1147                                 interrupts = <45>;
1148                                 dmas = <&dma_apbx 2>;
1149                                 dma-names = "tx";
1150                                 status = "disabled";
1151                         };
1152
1153                         mxs_rtc: rtc@80056000 {
1154                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1155                                 reg = <0x80056000 0x2000>;
1156                                 interrupts = <29>;
1157                         };
1158
1159                         i2c0: i2c@80058000 {
1160                                 #address-cells = <1>;
1161                                 #size-cells = <0>;
1162                                 compatible = "fsl,imx28-i2c";
1163                                 reg = <0x80058000 0x2000>;
1164                                 interrupts = <111>;
1165                                 clock-frequency = <100000>;
1166                                 dmas = <&dma_apbx 6>;
1167                                 dma-names = "rx-tx";
1168                                 status = "disabled";
1169                         };
1170
1171                         i2c1: i2c@8005a000 {
1172                                 #address-cells = <1>;
1173                                 #size-cells = <0>;
1174                                 compatible = "fsl,imx28-i2c";
1175                                 reg = <0x8005a000 0x2000>;
1176                                 interrupts = <110>;
1177                                 clock-frequency = <100000>;
1178                                 dmas = <&dma_apbx 7>;
1179                                 dma-names = "rx-tx";
1180                                 status = "disabled";
1181                         };
1182
1183                         pwm: pwm@80064000 {
1184                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1185                                 reg = <0x80064000 0x2000>;
1186                                 clocks = <&clks 44>;
1187                                 #pwm-cells = <2>;
1188                                 fsl,pwm-number = <8>;
1189                                 status = "disabled";
1190                         };
1191
1192                         timer: timrot@80068000 {
1193                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1194                                 reg = <0x80068000 0x2000>;
1195                                 interrupts = <48 49 50 51>;
1196                                 clocks = <&clks 26>;
1197                         };
1198
1199                         auart0: serial@8006a000 {
1200                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1201                                 reg = <0x8006a000 0x2000>;
1202                                 interrupts = <112>;
1203                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1204                                 dma-names = "rx", "tx";
1205                                 clocks = <&clks 45>;
1206                                 status = "disabled";
1207                         };
1208
1209                         auart1: serial@8006c000 {
1210                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1211                                 reg = <0x8006c000 0x2000>;
1212                                 interrupts = <113>;
1213                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1214                                 dma-names = "rx", "tx";
1215                                 clocks = <&clks 45>;
1216                                 status = "disabled";
1217                         };
1218
1219                         auart2: serial@8006e000 {
1220                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1221                                 reg = <0x8006e000 0x2000>;
1222                                 interrupts = <114>;
1223                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1224                                 dma-names = "rx", "tx";
1225                                 clocks = <&clks 45>;
1226                                 status = "disabled";
1227                         };
1228
1229                         auart3: serial@80070000 {
1230                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1231                                 reg = <0x80070000 0x2000>;
1232                                 interrupts = <115>;
1233                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1234                                 dma-names = "rx", "tx";
1235                                 clocks = <&clks 45>;
1236                                 status = "disabled";
1237                         };
1238
1239                         auart4: serial@80072000 {
1240                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1241                                 reg = <0x80072000 0x2000>;
1242                                 interrupts = <116>;
1243                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1244                                 dma-names = "rx", "tx";
1245                                 clocks = <&clks 45>;
1246                                 status = "disabled";
1247                         };
1248
1249                         duart: serial@80074000 {
1250                                 compatible = "arm,pl011", "arm,primecell";
1251                                 reg = <0x80074000 0x1000>;
1252                                 interrupts = <47>;
1253                                 clocks = <&clks 45>, <&clks 26>;
1254                                 clock-names = "uart", "apb_pclk";
1255                                 status = "disabled";
1256                         };
1257
1258                         usbphy0: usbphy@8007c000 {
1259                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1260                                 reg = <0x8007c000 0x2000>;
1261                                 clocks = <&clks 62>;
1262                                 status = "disabled";
1263                         };
1264
1265                         usbphy1: usbphy@8007e000 {
1266                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1267                                 reg = <0x8007e000 0x2000>;
1268                                 clocks = <&clks 63>;
1269                                 status = "disabled";
1270                         };
1271                 };
1272         };
1273
1274         ahb@80080000 {
1275                 compatible = "simple-bus";
1276                 #address-cells = <1>;
1277                 #size-cells = <1>;
1278                 reg = <0x80080000 0x80000>;
1279                 ranges;
1280
1281                 usb0: usb@80080000 {
1282                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1283                         reg = <0x80080000 0x10000>;
1284                         interrupts = <93>;
1285                         clocks = <&clks 60>;
1286                         fsl,usbphy = <&usbphy0>;
1287                         status = "disabled";
1288                 };
1289
1290                 usb1: usb@80090000 {
1291                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1292                         reg = <0x80090000 0x10000>;
1293                         interrupts = <92>;
1294                         clocks = <&clks 61>;
1295                         fsl,usbphy = <&usbphy1>;
1296                         dr_mode = "host";
1297                         status = "disabled";
1298                 };
1299
1300                 dflpt: dflpt@800c0000 {
1301                         reg = <0x800c0000 0x10000>;
1302                         status = "disabled";
1303                 };
1304
1305                 mac0: ethernet@800f0000 {
1306                         compatible = "fsl,imx28-fec";
1307                         reg = <0x800f0000 0x4000>;
1308                         interrupts = <101>;
1309                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1310                         clock-names = "ipg", "ahb", "enet_out";
1311                         status = "disabled";
1312                 };
1313
1314                 mac1: ethernet@800f4000 {
1315                         compatible = "fsl,imx28-fec";
1316                         reg = <0x800f4000 0x4000>;
1317                         interrupts = <102>;
1318                         clocks = <&clks 57>, <&clks 57>;
1319                         clock-names = "ipg", "ahb";
1320                         status = "disabled";
1321                 };
1322
1323                 etn_switch: switch@800f8000 {
1324                         reg = <0x800f8000 0x8000>;
1325                         status = "disabled";
1326                 };
1327         };
1328
1329         iio-hwmon {
1330                 compatible = "iio-hwmon";
1331                 io-channels = <&lradc 8>;
1332         };
1333 };