arch/arm/boot/dts/imx28.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2012 Freescale Semiconductor, Inc.
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include "imx28-pinfunc.h"
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11
  12         interrupt-parent = <&icoll>;
  13         /*
  14          * The decompressor and also some bootloaders rely on a
  15          * pre-existing /chosen node to be available to insert the
  16          * command line and merge other ATAGS info.
  17          * Also for U-Boot there must be a pre-existing /memory node.
  18          */
  19         chosen {};
  20         memory { device_type = "memory"; };
  21
  22         aliases {
  23                 ethernet0 = &mac0;
  24                 ethernet1 = &mac1;
  25                 gpio0 = &gpio0;
  26                 gpio1 = &gpio1;
  27                 gpio2 = &gpio2;
  28                 gpio3 = &gpio3;
  29                 gpio4 = &gpio4;
  30                 saif0 = &saif0;
  31                 saif1 = &saif1;
  32                 serial0 = &auart0;
  33                 serial1 = &auart1;
  34                 serial2 = &auart2;
  35                 serial3 = &auart3;
  36                 serial4 = &auart4;
  37                 spi0 = &ssp1;
  38                 spi1 = &ssp2;
  39                 usbphy0 = &usbphy0;
  40                 usbphy1 = &usbphy1;
  41         };
  42
  43         cpus {
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46
  47                 cpu@0 {
  48                         compatible = "arm,arm926ej-s";
  49                         device_type = "cpu";
  50                         reg = <0>;
  51                 };
  52         };
  53
  54         apb@80000000 {
  55                 compatible = "simple-bus";
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 reg = <0x80000000 0x80000>;
  59                 ranges;
  60
  61                 apbh@80000000 {
  62                         compatible = "simple-bus";
  63                         #address-cells = <1>;
  64                         #size-cells = <1>;
  65                         reg = <0x80000000 0x3c900>;
  66                         ranges;
  67
  68                         icoll: interrupt-controller@80000000 {
  69                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  70                                 interrupt-controller;
  71                                 #interrupt-cells = <1>;
  72                                 reg = <0x80000000 0x2000>;
  73                         };
  74
  75                         hsadc: hsadc@80002000 {
  76                                 reg = <0x80002000 0x2000>;
  77                                 interrupts = <13>;
  78                                 dmas = <&dma_apbh 12>;
  79                                 dma-names = "rx";
  80                                 status = "disabled";
  81                         };
  82
  83                         dma_apbh: dma-apbh@80004000 {
  84                                 compatible = "fsl,imx28-dma-apbh";
  85                                 reg = <0x80004000 0x2000>;
  86                                 interrupts = <82 83 84 85
  87                                               88 88 88 88
  88                                               88 88 88 88
  89                                               87 86 0 0>;
  90                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  91                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  92                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  93                                                   "hsadc", "lcdif", "empty", "empty";
  94                                 #dma-cells = <1>;
  95                                 dma-channels = <16>;
  96                                 clocks = <&clks 25>;
  97                         };
  98
  99                         perfmon: perfmon@80006000 {
 100                                 reg = <0x80006000 0x800>;
 101                                 interrupts = <27>;
 102                                 status = "disabled";
 103                         };
 104
 105                         gpmi: gpmi-nand@8000c000 {
 106                                 compatible = "fsl,imx28-gpmi-nand";
 107                                 #address-cells = <1>;
 108                                 #size-cells = <1>;
 109                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 110                                 reg-names = "gpmi-nand", "bch";
 111                                 interrupts = <41>;
 112                                 interrupt-names = "bch";
 113                                 clocks = <&clks 50>;
 114                                 clock-names = "gpmi_io";
 115                                 dmas = <&dma_apbh 4>;
 116                                 dma-names = "rx-tx";
 117                                 status = "disabled";
 118                         };
 119
 120                         ssp0: spi@80010000 {
 121                                 #address-cells = <1>;
 122                                 #size-cells = <0>;
 123                                 reg = <0x80010000 0x2000>;
 124                                 interrupts = <96>;
 125                                 clocks = <&clks 46>;
 126                                 dmas = <&dma_apbh 0>;
 127                                 dma-names = "rx-tx";
 128                                 status = "disabled";
 129                         };
 130
 131                         ssp1: spi@80012000 {
 132                                 #address-cells = <1>;
 133                                 #size-cells = <0>;
 134                                 reg = <0x80012000 0x2000>;
 135                                 interrupts = <97>;
 136                                 clocks = <&clks 47>;
 137                                 dmas = <&dma_apbh 1>;
 138                                 dma-names = "rx-tx";
 139                                 status = "disabled";
 140                         };
 141
 142                         ssp2: spi@80014000 {
 143                                 #address-cells = <1>;
 144                                 #size-cells = <0>;
 145                                 reg = <0x80014000 0x2000>;
 146                                 interrupts = <98>;
 147                                 clocks = <&clks 48>;
 148                                 dmas = <&dma_apbh 2>;
 149                                 dma-names = "rx-tx";
 150                                 status = "disabled";
 151                         };
 152
 153                         ssp3: spi@80016000 {
 154                                 #address-cells = <1>;
 155                                 #size-cells = <0>;
 156                                 reg = <0x80016000 0x2000>;
 157                                 interrupts = <99>;
 158                                 clocks = <&clks 49>;
 159                                 dmas = <&dma_apbh 3>;
 160                                 dma-names = "rx-tx";
 161                                 status = "disabled";
 162                         };
 163
 164                         pinctrl: pinctrl@80018000 {
 165                                 #address-cells = <1>;
 166                                 #size-cells = <0>;
 167                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 168                                 reg = <0x80018000 0x2000>;
 169
 170                                 gpio0: gpio@0 {
 171                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 172                                         reg = <0>;
 173                                         interrupts = <127>;
 174                                         gpio-controller;
 175                                         #gpio-cells = <2>;
 176                                         interrupt-controller;
 177                                         #interrupt-cells = <2>;
 178                                 };
 179
 180                                 gpio1: gpio@1 {
 181                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 182                                         reg = <1>;
 183                                         interrupts = <126>;
 184                                         gpio-controller;
 185                                         #gpio-cells = <2>;
 186                                         interrupt-controller;
 187                                         #interrupt-cells = <2>;
 188                                 };
 189
 190                                 gpio2: gpio@2 {
 191                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 192                                         reg = <2>;
 193                                         interrupts = <125>;
 194                                         gpio-controller;
 195                                         #gpio-cells = <2>;
 196                                         interrupt-controller;
 197                                         #interrupt-cells = <2>;
 198                                 };
 199
 200                                 gpio3: gpio@3 {
 201                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 202                                         reg = <3>;
 203                                         interrupts = <124>;
 204                                         gpio-controller;
 205                                         #gpio-cells = <2>;
 206                                         interrupt-controller;
 207                                         #interrupt-cells = <2>;
 208                                 };
 209
 210                                 gpio4: gpio@4 {
 211                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 212                                         reg = <4>;
 213                                         interrupts = <123>;
 214                                         gpio-controller;
 215                                         #gpio-cells = <2>;
 216                                         interrupt-controller;
 217                                         #interrupt-cells = <2>;
 218                                 };
 219
 220                                 duart_pins_a: duart@0 {
 221                                         reg = <0>;
 222                                         fsl,pinmux-ids = <
 223                                                 MX28_PAD_PWM0__DUART_RX
 224                                                 MX28_PAD_PWM1__DUART_TX
 225                                         >;
 226                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 227                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 228                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 229                                 };
 230
 231                                 duart_pins_b: duart@1 {
 232                                         reg = <1>;
 233                                         fsl,pinmux-ids = <
 234                                                 MX28_PAD_AUART0_CTS__DUART_RX
 235                                                 MX28_PAD_AUART0_RTS__DUART_TX
 236                                         >;
 237                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 238                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 239                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 240                                 };
 241
 242                                 duart_4pins_a: duart-4pins@0 {
 243                                         reg = <0>;
 244                                         fsl,pinmux-ids = <
 245                                                 MX28_PAD_AUART0_CTS__DUART_RX
 246                                                 MX28_PAD_AUART0_RTS__DUART_TX
 247                                                 MX28_PAD_AUART0_RX__DUART_CTS
 248                                                 MX28_PAD_AUART0_TX__DUART_RTS
 249                                         >;
 250                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 251                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 252                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 253                                 };
 254
 255                                 gpmi_pins_a: gpmi-nand@0 {
 256                                         reg = <0>;
 257                                         fsl,pinmux-ids = <
 258                                                 MX28_PAD_GPMI_D00__GPMI_D0
 259                                                 MX28_PAD_GPMI_D01__GPMI_D1
 260                                                 MX28_PAD_GPMI_D02__GPMI_D2
 261                                                 MX28_PAD_GPMI_D03__GPMI_D3
 262                                                 MX28_PAD_GPMI_D04__GPMI_D4
 263                                                 MX28_PAD_GPMI_D05__GPMI_D5
 264                                                 MX28_PAD_GPMI_D06__GPMI_D6
 265                                                 MX28_PAD_GPMI_D07__GPMI_D7
 266                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 267                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 268                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 269                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 270                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 271                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 272                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 273                                         >;
 274                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 275                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 276                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 277                                 };
 278
 279                                 gpmi_status_cfg: gpmi-status-cfg@0 {
 280                                         reg = <0>;
 281                                         fsl,pinmux-ids = <
 282                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 283                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 284                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 285                                         >;
 286                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 287                                 };
 288
 289                                 auart0_pins_a: auart0@0 {
 290                                         reg = <0>;
 291                                         fsl,pinmux-ids = <
 292                                                 MX28_PAD_AUART0_RX__AUART0_RX
 293                                                 MX28_PAD_AUART0_TX__AUART0_TX
 294                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 295                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 296                                         >;
 297                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 298                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 299                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 300                                 };
 301
 302                                 auart0_2pins_a: auart0-2pins@0 {
 303                                         reg = <0>;
 304                                         fsl,pinmux-ids = <
 305                                                 MX28_PAD_AUART0_RX__AUART0_RX
 306                                                 MX28_PAD_AUART0_TX__AUART0_TX
 307                                         >;
 308                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 309                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 310                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 311                                 };
 312
 313                                 auart1_pins_a: auart1@0 {
 314                                         reg = <0>;
 315                                         fsl,pinmux-ids = <
 316                                                 MX28_PAD_AUART1_RX__AUART1_RX
 317                                                 MX28_PAD_AUART1_TX__AUART1_TX
 318                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 319                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 320                                         >;
 321                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 322                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 323                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 324                                 };
 325
 326                                 auart1_2pins_a: auart1-2pins@0 {
 327                                         reg = <0>;
 328                                         fsl,pinmux-ids = <
 329                                                 MX28_PAD_AUART1_RX__AUART1_RX
 330                                                 MX28_PAD_AUART1_TX__AUART1_TX
 331                                         >;
 332                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 333                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 334                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 335                                 };
 336
 337                                 auart2_2pins_a: auart2-2pins@0 {
 338                                         reg = <0>;
 339                                         fsl,pinmux-ids = <
 340                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 341                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 342                                         >;
 343                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 344                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 345                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 346                                 };
 347
 348                                 auart2_2pins_b: auart2-2pins@1 {
 349                                         reg = <1>;
 350                                         fsl,pinmux-ids = <
 351                                                 MX28_PAD_AUART2_RX__AUART2_RX
 352                                                 MX28_PAD_AUART2_TX__AUART2_TX
 353                                         >;
 354                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 355                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 356                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 357                                 };
 358
 359                                 auart2_pins_a: auart2-pins@0 {
 360                                         reg = <0>;
 361                                         fsl,pinmux-ids = <
 362                                                 MX28_PAD_AUART2_RX__AUART2_RX
 363                                                 MX28_PAD_AUART2_TX__AUART2_TX
 364                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
 365                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
 366                                         >;
 367                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 368                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 369                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 370                                 };
 371
 372                                 auart3_pins_a: auart3@0 {
 373                                         reg = <0>;
 374                                         fsl,pinmux-ids = <
 375                                                 MX28_PAD_AUART3_RX__AUART3_RX
 376                                                 MX28_PAD_AUART3_TX__AUART3_TX
 377                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 378                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 379                                         >;
 380                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 381                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 382                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 383                                 };
 384
 385                                 auart3_2pins_a: auart3-2pins@0 {
 386                                         reg = <0>;
 387                                         fsl,pinmux-ids = <
 388                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 389                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 390                                         >;
 391                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 392                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 393                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 394                                 };
 395
 396                                 auart3_2pins_b: auart3-2pins@1 {
 397                                         reg = <1>;
 398                                         fsl,pinmux-ids = <
 399                                                 MX28_PAD_AUART3_RX__AUART3_RX
 400                                                 MX28_PAD_AUART3_TX__AUART3_TX
 401                                         >;
 402                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 403                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 404                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 405                                 };
 406
 407                                 auart4_2pins_a: auart4@0 {
 408                                         reg = <0>;
 409                                         fsl,pinmux-ids = <
 410                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 411                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 412                                         >;
 413                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 414                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 415                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 416                                 };
 417
 418                                 auart4_2pins_b: auart4@1 {
 419                                         reg = <1>;
 420                                         fsl,pinmux-ids = <
 421                                                 MX28_PAD_AUART0_CTS__AUART4_RX
 422                                                 MX28_PAD_AUART0_RTS__AUART4_TX
 423                                         >;
 424                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 425                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 426                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 427                                 };
 428
 429                                 mac0_pins_a: mac0@0 {
 430                                         reg = <0>;
 431                                         fsl,pinmux-ids = <
 432                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 433                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 434                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 435                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 436                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 437                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 438                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 439                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 440                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 441                                         >;
 442                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 443                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 444                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 445                                 };
 446
 447                                 mac0_pins_b: mac0@1 {
 448                                         reg = <1>;
 449                                         fsl,pinmux-ids = <
 450                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 451                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 452                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 453                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 454                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 455                                                 MX28_PAD_ENET0_RXD2__ENET0_RXD2
 456                                                 MX28_PAD_ENET0_RXD3__ENET0_RXD3
 457                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 458                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 459                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 460                                                 MX28_PAD_ENET0_TXD2__ENET0_TXD2
 461                                                 MX28_PAD_ENET0_TXD3__ENET0_TXD3
 462                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 463                                                 MX28_PAD_ENET0_COL__ENET0_COL
 464                                                 MX28_PAD_ENET0_CRS__ENET0_CRS
 465                                                 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
 466                                                 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
 467                                                 >;
 468                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 469                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 470                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 471                                 };
 472
 473                                 mac1_pins_a: mac1@0 {
 474                                         reg = <0>;
 475                                         fsl,pinmux-ids = <
 476                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 477                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 478                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 479                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 480                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 481                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 482                                         >;
 483                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 484                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 485                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 486                                 };
 487
 488                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 489                                         reg = <0>;
 490                                         fsl,pinmux-ids = <
 491                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 492                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 493                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 494                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 495                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 496                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 497                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 498                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 499                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 500                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 501                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 502                                         >;
 503                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 504                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 505                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 506                                 };
 507
 508                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 509                                         reg = <0>;
 510                                         fsl,pinmux-ids = <
 511                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 512                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 513                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 514                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 515                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 516                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 517                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 518                                         >;
 519                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 520                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 521                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 522                                 };
 523
 524                                 mmc0_cd_cfg: mmc0-cd-cfg@0 {
 525                                         reg = <0>;
 526                                         fsl,pinmux-ids = <
 527                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 528                                         >;
 529                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 530                                 };
 531
 532                                 mmc0_sck_cfg: mmc0-sck-cfg@0 {
 533                                         reg = <0>;
 534                                         fsl,pinmux-ids = <
 535                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 536                                         >;
 537                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 538                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 539                                 };
 540
 541                                 mmc1_4bit_pins_a: mmc1-4bit@0 {
 542                                         reg = <0>;
 543                                         fsl,pinmux-ids = <
 544                                                 MX28_PAD_GPMI_D00__SSP1_D0
 545                                                 MX28_PAD_GPMI_D01__SSP1_D1
 546                                                 MX28_PAD_GPMI_D02__SSP1_D2
 547                                                 MX28_PAD_GPMI_D03__SSP1_D3
 548                                                 MX28_PAD_GPMI_RDY1__SSP1_CMD
 549                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 550                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 551                                         >;
 552                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 553                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 554                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 555                                 };
 556
 557                                 mmc1_cd_cfg: mmc1-cd-cfg@0 {
 558                                         reg = <0>;
 559                                         fsl,pinmux-ids = <
 560                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 561                                         >;
 562                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 563                                 };
 564
 565                                 mmc1_sck_cfg: mmc1-sck-cfg@0 {
 566                                         reg = <0>;
 567                                         fsl,pinmux-ids = <
 568                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 569                                         >;
 570                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 571                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 572                                 };
 573
 574
 575                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 576                                         reg = <0>;
 577                                         fsl,pinmux-ids = <
 578                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 579                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 580                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 581                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 582                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 583                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 584                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 585                                         >;
 586                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 587                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 588                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 589                                 };
 590
 591                                 mmc2_4bit_pins_b: mmc2-4bit@1 {
 592                                         reg = <1>;
 593                                         fsl,pinmux-ids = <
 594                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 595                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 596                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 597                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 598                                                 MX28_PAD_SSP2_SS1__SSP2_D1
 599                                                 MX28_PAD_SSP2_SS2__SSP2_D2
 600                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 601                                         >;
 602                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 603                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 604                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 605                                 };
 606
 607                                 mmc2_cd_cfg: mmc2-cd-cfg@0 {
 608                                         reg = <0>;
 609                                         fsl,pinmux-ids = <
 610                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 611                                         >;
 612                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 613                                 };
 614
 615                                 mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
 616                                         reg = <0>;
 617                                         fsl,pinmux-ids = <
 618                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 619                                         >;
 620                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 621                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 622                                 };
 623
 624                                 mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
 625                                         reg = <1>;
 626                                         fsl,pinmux-ids = <
 627                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 628                                         >;
 629                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 630                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 631                                 };
 632
 633                                 i2c0_pins_a: i2c0@0 {
 634                                         reg = <0>;
 635                                         fsl,pinmux-ids = <
 636                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 637                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 638                                         >;
 639                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 640                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 641                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 642                                 };
 643
 644                                 i2c0_pins_b: i2c0@1 {
 645                                         reg = <1>;
 646                                         fsl,pinmux-ids = <
 647                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 648                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 649                                         >;
 650                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 651                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 652                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 653                                 };
 654
 655                                 i2c1_pins_a: i2c1@0 {
 656                                         reg = <0>;
 657                                         fsl,pinmux-ids = <
 658                                                 MX28_PAD_PWM0__I2C1_SCL
 659                                                 MX28_PAD_PWM1__I2C1_SDA
 660                                         >;
 661                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 662                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 663                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 664                                 };
 665
 666                                 i2c1_pins_b: i2c1@1 {
 667                                         reg = <1>;
 668                                         fsl,pinmux-ids = <
 669                                                 MX28_PAD_AUART2_CTS__I2C1_SCL
 670                                                 MX28_PAD_AUART2_RTS__I2C1_SDA
 671                                         >;
 672                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 673                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 674                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 675                                 };
 676
 677                                 saif0_pins_a: saif0@0 {
 678                                         reg = <0>;
 679                                         fsl,pinmux-ids = <
 680                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 681                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 682                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 683                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 684                                         >;
 685                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 686                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 687                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 688                                 };
 689
 690                                 saif0_pins_b: saif0@1 {
 691                                         reg = <1>;
 692                                         fsl,pinmux-ids = <
 693                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 694                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 695                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 696                                         >;
 697                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 698                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 699                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 700                                 };
 701
 702                                 saif1_pins_a: saif1@0 {
 703                                         reg = <0>;
 704                                         fsl,pinmux-ids = <
 705                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 706                                         >;
 707                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 708                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 709                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 710                                 };
 711
 712                                 pwm0_pins_a: pwm0@0 {
 713                                         reg = <0>;
 714                                         fsl,pinmux-ids = <
 715                                                 MX28_PAD_PWM0__PWM_0
 716                                         >;
 717                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 718                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 719                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 720                                 };
 721
 722                                 pwm2_pins_a: pwm2@0 {
 723                                         reg = <0>;
 724                                         fsl,pinmux-ids = <
 725                                                 MX28_PAD_PWM2__PWM_2
 726                                         >;
 727                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 728                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 729                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 730                                 };
 731
 732                                 pwm3_pins_a: pwm3@0 {
 733                                         reg = <0>;
 734                                         fsl,pinmux-ids = <
 735                                                 MX28_PAD_PWM3__PWM_3
 736                                         >;
 737                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 738                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 739                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 740                                 };
 741
 742                                 pwm3_pins_b: pwm3@1 {
 743                                         reg = <1>;
 744                                         fsl,pinmux-ids = <
 745                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 746                                         >;
 747                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 748                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 749                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 750                                 };
 751
 752                                 pwm4_pins_a: pwm4@0 {
 753                                         reg = <0>;
 754                                         fsl,pinmux-ids = <
 755                                                 MX28_PAD_PWM4__PWM_4
 756                                         >;
 757                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 758                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 759                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 760                                 };
 761
 762                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 763                                         reg = <0>;
 764                                         fsl,pinmux-ids = <
 765                                                 MX28_PAD_LCD_D00__LCD_D0
 766                                                 MX28_PAD_LCD_D01__LCD_D1
 767                                                 MX28_PAD_LCD_D02__LCD_D2
 768                                                 MX28_PAD_LCD_D03__LCD_D3
 769                                                 MX28_PAD_LCD_D04__LCD_D4
 770                                                 MX28_PAD_LCD_D05__LCD_D5
 771                                                 MX28_PAD_LCD_D06__LCD_D6
 772                                                 MX28_PAD_LCD_D07__LCD_D7
 773                                                 MX28_PAD_LCD_D08__LCD_D8
 774                                                 MX28_PAD_LCD_D09__LCD_D9
 775                                                 MX28_PAD_LCD_D10__LCD_D10
 776                                                 MX28_PAD_LCD_D11__LCD_D11
 777                                                 MX28_PAD_LCD_D12__LCD_D12
 778                                                 MX28_PAD_LCD_D13__LCD_D13
 779                                                 MX28_PAD_LCD_D14__LCD_D14
 780                                                 MX28_PAD_LCD_D15__LCD_D15
 781                                                 MX28_PAD_LCD_D16__LCD_D16
 782                                                 MX28_PAD_LCD_D17__LCD_D17
 783                                                 MX28_PAD_LCD_D18__LCD_D18
 784                                                 MX28_PAD_LCD_D19__LCD_D19
 785                                                 MX28_PAD_LCD_D20__LCD_D20
 786                                                 MX28_PAD_LCD_D21__LCD_D21
 787                                                 MX28_PAD_LCD_D22__LCD_D22
 788                                                 MX28_PAD_LCD_D23__LCD_D23
 789                                         >;
 790                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 791                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 792                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 793                                 };
 794
 795                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
 796                                         reg = <0>;
 797                                         fsl,pinmux-ids = <
 798                                                 MX28_PAD_LCD_D00__LCD_D0
 799                                                 MX28_PAD_LCD_D01__LCD_D1
 800                                                 MX28_PAD_LCD_D02__LCD_D2
 801                                                 MX28_PAD_LCD_D03__LCD_D3
 802                                                 MX28_PAD_LCD_D04__LCD_D4
 803                                                 MX28_PAD_LCD_D05__LCD_D5
 804                                                 MX28_PAD_LCD_D06__LCD_D6
 805                                                 MX28_PAD_LCD_D07__LCD_D7
 806                                                 MX28_PAD_LCD_D08__LCD_D8
 807                                                 MX28_PAD_LCD_D09__LCD_D9
 808                                                 MX28_PAD_LCD_D10__LCD_D10
 809                                                 MX28_PAD_LCD_D11__LCD_D11
 810                                                 MX28_PAD_LCD_D12__LCD_D12
 811                                                 MX28_PAD_LCD_D13__LCD_D13
 812                                                 MX28_PAD_LCD_D14__LCD_D14
 813                                                 MX28_PAD_LCD_D15__LCD_D15
 814                                                 MX28_PAD_LCD_D16__LCD_D16
 815                                                 MX28_PAD_LCD_D17__LCD_D17
 816                                         >;
 817                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 818                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 819                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 820                                 };
 821
 822                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 823                                         reg = <0>;
 824                                         fsl,pinmux-ids = <
 825                                                 MX28_PAD_LCD_D00__LCD_D0
 826                                                 MX28_PAD_LCD_D01__LCD_D1
 827                                                 MX28_PAD_LCD_D02__LCD_D2
 828                                                 MX28_PAD_LCD_D03__LCD_D3
 829                                                 MX28_PAD_LCD_D04__LCD_D4
 830                                                 MX28_PAD_LCD_D05__LCD_D5
 831                                                 MX28_PAD_LCD_D06__LCD_D6
 832                                                 MX28_PAD_LCD_D07__LCD_D7
 833                                                 MX28_PAD_LCD_D08__LCD_D8
 834                                                 MX28_PAD_LCD_D09__LCD_D9
 835                                                 MX28_PAD_LCD_D10__LCD_D10
 836                                                 MX28_PAD_LCD_D11__LCD_D11
 837                                                 MX28_PAD_LCD_D12__LCD_D12
 838                                                 MX28_PAD_LCD_D13__LCD_D13
 839                                                 MX28_PAD_LCD_D14__LCD_D14
 840                                                 MX28_PAD_LCD_D15__LCD_D15
 841                                         >;
 842                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 843                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 844                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 845                                 };
 846
 847                                 lcdif_sync_pins_a: lcdif-sync@0 {
 848                                         reg = <0>;
 849                                         fsl,pinmux-ids = <
 850                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 851                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 852                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 853                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 854                                         >;
 855                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 856                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 857                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 858                                 };
 859
 860                                 can0_pins_a: can0@0 {
 861                                         reg = <0>;
 862                                         fsl,pinmux-ids = <
 863                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 864                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 865                                         >;
 866                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 867                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 868                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 869                                 };
 870
 871                                 can1_pins_a: can1@0 {
 872                                         reg = <0>;
 873                                         fsl,pinmux-ids = <
 874                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 875                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 876                                         >;
 877                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 878                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 879                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 880                                 };
 881
 882                                 spi2_pins_a: spi2@0 {
 883                                         reg = <0>;
 884                                         fsl,pinmux-ids = <
 885                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 886                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 887                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 888                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 889                                         >;
 890                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 891                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 892                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 893                                 };
 894
 895                                 spi3_pins_a: spi3@0 {
 896                                         reg = <0>;
 897                                         fsl,pinmux-ids = <
 898                                                 MX28_PAD_AUART2_RX__SSP3_D4
 899                                                 MX28_PAD_AUART2_TX__SSP3_D5
 900                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 901                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 902                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 903                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 904                                         >;
 905                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 906                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 907                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 908                                 };
 909
 910                                 spi3_pins_b: spi3@1 {
 911                                         reg = <1>;
 912                                         fsl,pinmux-ids = <
 913                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 914                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 915                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 916                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 917                                         >;
 918                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 919                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 920                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 921                                 };
 922
 923                                 usb0_pins_a: usb0@0 {
 924                                         reg = <0>;
 925                                         fsl,pinmux-ids = <
 926                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 927                                         >;
 928                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 929                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 930                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 931                                 };
 932
 933                                 usb0_pins_b: usb0@1 {
 934                                         reg = <1>;
 935                                         fsl,pinmux-ids = <
 936                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 937                                         >;
 938                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 939                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 940                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 941                                 };
 942
 943                                 usb1_pins_a: usb1@0 {
 944                                         reg = <0>;
 945                                         fsl,pinmux-ids = <
 946                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 947                                         >;
 948                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 949                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 950                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 951                                 };
 952
 953                                 usb0_id_pins_a: usb0id@0 {
 954                                         reg = <0>;
 955                                         fsl,pinmux-ids = <
 956                                                 MX28_PAD_AUART1_RTS__USB0_ID
 957                                         >;
 958                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 959                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 960                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 961                                 };
 962
 963                                 usb0_id_pins_b: usb0id1@0 {
 964                                         reg = <0>;
 965                                         fsl,pinmux-ids = <
 966                                                 MX28_PAD_PWM2__USB0_ID
 967                                         >;
 968                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 969                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 970                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 971                                 };
 972
 973                         };
 974
 975                         digctl: digctl@8001c000 {
 976                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 977                                 reg = <0x8001c000 0x2000>;
 978                                 interrupts = <89>;
 979                                 status = "disabled";
 980                         };
 981
 982                         etm: etm@80022000 {
 983                                 reg = <0x80022000 0x2000>;
 984                                 status = "disabled";
 985                         };
 986
 987                         dma_apbx: dma-apbx@80024000 {
 988                                 compatible = "fsl,imx28-dma-apbx";
 989                                 reg = <0x80024000 0x2000>;
 990                                 interrupts = <78 79 66 0
 991                                               80 81 68 69
 992                                               70 71 72 73
 993                                               74 75 76 77>;
 994                                 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 995                                                   "saif0", "saif1", "i2c0", "i2c1",
 996                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 997                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 998                                 #dma-cells = <1>;
 999                                 dma-channels = <16>;
1000                                 clocks = <&clks 26>;
1001                         };
1002
1003                         dcp: dcp@80028000 {
1004                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
1005                                 reg = <0x80028000 0x2000>;
1006                                 interrupts = <52 53 54>;
1007                                 status = "okay";
1008                         };
1009
1010                         pxp: pxp@8002a000 {
1011                                 reg = <0x8002a000 0x2000>;
1012                                 interrupts = <39>;
1013                                 status = "disabled";
1014                         };
1015
1016                         ocotp: ocotp@8002c000 {
1017                                 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
1018                                 #address-cells = <1>;
1019                                 #size-cells = <1>;
1020                                 reg = <0x8002c000 0x2000>;
1021                                 clocks = <&clks 25>;
1022                         };
1023
1024                         axi-ahb@8002e000 {
1025                                 reg = <0x8002e000 0x2000>;
1026                                 status = "disabled";
1027                         };
1028
1029                         lcdif: lcdif@80030000 {
1030                                 compatible = "fsl,imx28-lcdif";
1031                                 reg = <0x80030000 0x2000>;
1032                                 interrupts = <38>;
1033                                 clocks = <&clks 55>;
1034                                 dmas = <&dma_apbh 13>;
1035                                 dma-names = "rx";
1036                                 status = "disabled";
1037                         };
1038
1039                         can0: can@80032000 {
1040                                 compatible = "fsl,imx28-flexcan";
1041                                 reg = <0x80032000 0x2000>;
1042                                 interrupts = <8>;
1043                                 clocks = <&clks 58>, <&clks 58>;
1044                                 clock-names = "ipg", "per";
1045                                 status = "disabled";
1046                         };
1047
1048                         can1: can@80034000 {
1049                                 compatible = "fsl,imx28-flexcan";
1050                                 reg = <0x80034000 0x2000>;
1051                                 interrupts = <9>;
1052                                 clocks = <&clks 59>, <&clks 59>;
1053                                 clock-names = "ipg", "per";
1054                                 status = "disabled";
1055                         };
1056
1057                         simdbg: simdbg@8003c000 {
1058                                 reg = <0x8003c000 0x200>;
1059                                 status = "disabled";
1060                         };
1061
1062                         simgpmisel: simgpmisel@8003c200 {
1063                                 reg = <0x8003c200 0x100>;
1064                                 status = "disabled";
1065                         };
1066
1067                         simsspsel: simsspsel@8003c300 {
1068                                 reg = <0x8003c300 0x100>;
1069                                 status = "disabled";
1070                         };
1071
1072                         simmemsel: simmemsel@8003c400 {
1073                                 reg = <0x8003c400 0x100>;
1074                                 status = "disabled";
1075                         };
1076
1077                         gpiomon: gpiomon@8003c500 {
1078                                 reg = <0x8003c500 0x100>;
1079                                 status = "disabled";
1080                         };
1081
1082                         simenet: simenet@8003c700 {
1083                                 reg = <0x8003c700 0x100>;
1084                                 status = "disabled";
1085                         };
1086
1087                         armjtag: armjtag@8003c800 {
1088                                 reg = <0x8003c800 0x100>;
1089                                 status = "disabled";
1090                         };
1091                 };
1092
1093                 apbx@80040000 {
1094                         compatible = "simple-bus";
1095                         #address-cells = <1>;
1096                         #size-cells = <1>;
1097                         reg = <0x80040000 0x40000>;
1098                         ranges;
1099
1100                         clks: clkctrl@80040000 {
1101                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1102                                 reg = <0x80040000 0x2000>;
1103                                 #clock-cells = <1>;
1104                         };
1105
1106                         saif0: saif@80042000 {
1107                                 #sound-dai-cells = <0>;
1108                                 compatible = "fsl,imx28-saif";
1109                                 reg = <0x80042000 0x2000>;
1110                                 interrupts = <59>;
1111                                 #clock-cells = <0>;
1112                                 clocks = <&clks 53>;
1113                                 dmas = <&dma_apbx 4>;
1114                                 dma-names = "rx-tx";
1115                                 status = "disabled";
1116                         };
1117
1118                         power: power@80044000 {
1119                                 reg = <0x80044000 0x2000>;
1120                                 status = "disabled";
1121                         };
1122
1123                         saif1: saif@80046000 {
1124                                 #sound-dai-cells = <0>;
1125                                 compatible = "fsl,imx28-saif";
1126                                 reg = <0x80046000 0x2000>;
1127                                 interrupts = <58>;
1128                                 clocks = <&clks 54>;
1129                                 dmas = <&dma_apbx 5>;
1130                                 dma-names = "rx-tx";
1131                                 status = "disabled";
1132                         };
1133
1134                         lradc: lradc@80050000 {
1135                                 compatible = "fsl,imx28-lradc";
1136                                 reg = <0x80050000 0x2000>;
1137                                 interrupts = <10 14 15 16 17 18 19
1138                                                 20 21 22 23 24 25>;
1139                                 status = "disabled";
1140                                 clocks = <&clks 41>;
1141                                 #io-channel-cells = <1>;
1142                         };
1143
1144                         spdif: spdif@80054000 {
1145                                 reg = <0x80054000 0x2000>;
1146                                 interrupts = <45>;
1147                                 dmas = <&dma_apbx 2>;
1148                                 dma-names = "tx";
1149                                 status = "disabled";
1150                         };
1151
1152                         mxs_rtc: rtc@80056000 {
1153                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1154                                 reg = <0x80056000 0x2000>;
1155                                 interrupts = <29>;
1156                         };
1157
1158                         i2c0: i2c@80058000 {
1159                                 #address-cells = <1>;
1160                                 #size-cells = <0>;
1161                                 compatible = "fsl,imx28-i2c";
1162                                 reg = <0x80058000 0x2000>;
1163                                 interrupts = <111>;
1164                                 clock-frequency = <100000>;
1165                                 dmas = <&dma_apbx 6>;
1166                                 dma-names = "rx-tx";
1167                                 status = "disabled";
1168                         };
1169
1170                         i2c1: i2c@8005a000 {
1171                                 #address-cells = <1>;
1172                                 #size-cells = <0>;
1173                                 compatible = "fsl,imx28-i2c";
1174                                 reg = <0x8005a000 0x2000>;
1175                                 interrupts = <110>;
1176                                 clock-frequency = <100000>;
1177                                 dmas = <&dma_apbx 7>;
1178                                 dma-names = "rx-tx";
1179                                 status = "disabled";
1180                         };
1181
1182                         pwm: pwm@80064000 {
1183                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1184                                 reg = <0x80064000 0x2000>;
1185                                 clocks = <&clks 44>;
1186                                 #pwm-cells = <2>;
1187                                 fsl,pwm-number = <8>;
1188                                 status = "disabled";
1189                         };
1190
1191                         timer: timrot@80068000 {
1192                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1193                                 reg = <0x80068000 0x2000>;
1194                                 interrupts = <48 49 50 51>;
1195                                 clocks = <&clks 26>;
1196                         };
1197
1198                         auart0: serial@8006a000 {
1199                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1200                                 reg = <0x8006a000 0x2000>;
1201                                 interrupts = <112>;
1202                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1203                                 dma-names = "rx", "tx";
1204                                 clocks = <&clks 45>;
1205                                 status = "disabled";
1206                         };
1207
1208                         auart1: serial@8006c000 {
1209                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1210                                 reg = <0x8006c000 0x2000>;
1211                                 interrupts = <113>;
1212                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1213                                 dma-names = "rx", "tx";
1214                                 clocks = <&clks 45>;
1215                                 status = "disabled";
1216                         };
1217
1218                         auart2: serial@8006e000 {
1219                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1220                                 reg = <0x8006e000 0x2000>;
1221                                 interrupts = <114>;
1222                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1223                                 dma-names = "rx", "tx";
1224                                 clocks = <&clks 45>;
1225                                 status = "disabled";
1226                         };
1227
1228                         auart3: serial@80070000 {
1229                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1230                                 reg = <0x80070000 0x2000>;
1231                                 interrupts = <115>;
1232                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1233                                 dma-names = "rx", "tx";
1234                                 clocks = <&clks 45>;
1235                                 status = "disabled";
1236                         };
1237
1238                         auart4: serial@80072000 {
1239                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1240                                 reg = <0x80072000 0x2000>;
1241                                 interrupts = <116>;
1242                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1243                                 dma-names = "rx", "tx";
1244                                 clocks = <&clks 45>;
1245                                 status = "disabled";
1246                         };
1247
1248                         duart: serial@80074000 {
1249                                 compatible = "arm,pl011", "arm,primecell";
1250                                 reg = <0x80074000 0x1000>;
1251                                 interrupts = <47>;
1252                                 clocks = <&clks 45>, <&clks 26>;
1253                                 clock-names = "uart", "apb_pclk";
1254                                 status = "disabled";
1255                         };
1256
1257                         usbphy0: usbphy@8007c000 {
1258                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1259                                 reg = <0x8007c000 0x2000>;
1260                                 clocks = <&clks 62>;
1261                                 status = "disabled";
1262                         };
1263
1264                         usbphy1: usbphy@8007e000 {
1265                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1266                                 reg = <0x8007e000 0x2000>;
1267                                 clocks = <&clks 63>;
1268                                 status = "disabled";
1269                         };
1270                 };
1271         };
1272
1273         ahb@80080000 {
1274                 compatible = "simple-bus";
1275                 #address-cells = <1>;
1276                 #size-cells = <1>;
1277                 reg = <0x80080000 0x80000>;
1278                 ranges;
1279
1280                 usb0: usb@80080000 {
1281                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1282                         reg = <0x80080000 0x10000>;
1283                         interrupts = <93>;
1284                         clocks = <&clks 60>;
1285                         fsl,usbphy = <&usbphy0>;
1286                         status = "disabled";
1287                 };
1288
1289                 usb1: usb@80090000 {
1290                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1291                         reg = <0x80090000 0x10000>;
1292                         interrupts = <92>;
1293                         clocks = <&clks 61>;
1294                         fsl,usbphy = <&usbphy1>;
1295                         dr_mode = "host";
1296                         status = "disabled";
1297                 };
1298
1299                 dflpt: dflpt@800c0000 {
1300                         reg = <0x800c0000 0x10000>;
1301                         status = "disabled";
1302                 };
1303
1304                 mac0: ethernet@800f0000 {
1305                         compatible = "fsl,imx28-fec";
1306                         reg = <0x800f0000 0x4000>;
1307                         interrupts = <101>;
1308                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1309                         clock-names = "ipg", "ahb", "enet_out";
1310                         status = "disabled";
1311                 };
1312
1313                 mac1: ethernet@800f4000 {
1314                         compatible = "fsl,imx28-fec";
1315                         reg = <0x800f4000 0x4000>;
1316                         interrupts = <102>;
1317                         clocks = <&clks 57>, <&clks 57>;
1318                         clock-names = "ipg", "ahb";
1319                         status = "disabled";
1320                 };
1321
1322                 etn_switch: switch@800f8000 {
1323                         reg = <0x800f8000 0x8000>;
1324                         status = "disabled";
1325                 };
1326         };
1327
1328         iio-hwmon {
1329                 compatible = "iio-hwmon";
1330                 io-channels = <&lradc 8>;
1331         };
1332 };