arch/arm/boot/dts/imx28-m28cu3.dts

   1 /*
   2  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13 #include "imx28.dtsi"
  14
  15 / {
  16         model = "MSR M28CU3";
  17         compatible = "msr,m28cu3", "fsl,imx28";
  18
  19         memory@40000000 {
  20                 reg = <0x40000000 0x08000000>;
  21         };
  22
  23         apb@80000000 {
  24                 apbh@80000000 {
  25                         gpmi-nand@8000c000 {
  26                                 #address-cells = <1>;
  27                                 #size-cells = <1>;
  28                                 pinctrl-names = "default";
  29                                 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
  30                                 status = "okay";
  31
  32                                 partition@0 {
  33                                         label = "gpmi-nfc-0-boot";
  34                                         reg = <0x00000000 0x01400000>;
  35                                         read-only;
  36                                 };
  37
  38                                 partition@1 {
  39                                         label = "gpmi-nfc-general-use";
  40                                         reg = <0x01400000 0x0ec00000>;
  41                                 };
  42                         };
  43
  44                         ssp0: ssp@80010000 {
  45                                 compatible = "fsl,imx28-mmc";
  46                                 pinctrl-names = "default";
  47                                 pinctrl-0 = <&mmc0_4bit_pins_a
  48                                              &mmc0_cd_cfg
  49                                              &mmc0_sck_cfg>;
  50                                 bus-width = <4>;
  51                                 vmmc-supply = <&reg_vddio_sd0>;
  52                                 status = "okay";
  53                         };
  54
  55                         ssp2: ssp@80014000 {
  56                                 compatible = "fsl,imx28-mmc";
  57                                 pinctrl-names = "default";
  58                                 pinctrl-0 = <&mmc2_4bit_pins_a
  59                                              &mmc2_cd_cfg
  60                                              &mmc2_sck_cfg_a>;
  61                                 bus-width = <4>;
  62                                 vmmc-supply = <&reg_vddio_sd1>;
  63                                 status = "okay";
  64                         };
  65
  66                         pinctrl@80018000 {
  67                                 pinctrl-names = "default";
  68                                 pinctrl-0 = <&hog_pins_a>;
  69
  70                                 hog_pins_a: hog@0 {
  71                                         reg = <0>;
  72                                         fsl,pinmux-ids = <
  73                                                 MX28_PAD_SSP2_SS0__GPIO_2_19
  74                                                 MX28_PAD_PWM4__GPIO_3_29
  75                                                 MX28_PAD_AUART2_RX__GPIO_3_8
  76                                                 MX28_PAD_ENET0_RX_CLK__GPIO_4_13
  77                                         >;
  78                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
  79                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
  80                                         fsl,pull-up = <MXS_PULL_DISABLE>;
  81                                 };
  82
  83                                 lcdif_pins_m28: lcdif-m28@0 {
  84                                         reg = <0>;
  85                                         fsl,pinmux-ids = <
  86                                                 MX28_PAD_LCD_VSYNC__LCD_VSYNC
  87                                                 MX28_PAD_LCD_HSYNC__LCD_HSYNC
  88                                                 MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
  89                                                 MX28_PAD_LCD_RESET__LCD_RESET
  90                                                 MX28_PAD_LCD_CS__LCD_ENABLE
  91                                                 MX28_PAD_AUART1_TX__GPIO_3_5
  92                                         >;
  93                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
  94                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
  95                                         fsl,pull-up = <MXS_PULL_DISABLE>;
  96                                 };
  97
  98                                 led_pins_gpio: leds-m28@0 {
  99                                         reg = <0>;
 100                                         fsl,pinmux-ids = <
 101                                                 MX28_PAD_SSP3_MISO__GPIO_2_26
 102                                                 MX28_PAD_SSP3_SCK__GPIO_2_24
 103                                         >;
 104                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 105                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 106                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 107                                 };
 108                         };
 109
 110                         ocotp@8002c000 {
 111                                 status = "okay";
 112                         };
 113
 114                         lcdif@80030000 {
 115                                 pinctrl-names = "default";
 116                                 pinctrl-0 = <&lcdif_24bit_pins_a
 117                                              &lcdif_pins_m28>;
 118                                 display = <&display0>;
 119                                 status = "okay";
 120
 121                                 display0: display0 {
 122                                         bits-per-pixel = <32>;
 123                                         bus-width = <24>;
 124
 125                                         display-timings {
 126                                                 native-mode = <&timing0>;
 127                                                 timing0: timing0 {
 128                                                         clock-frequency = <6410256>;
 129                                                         hactive = <320>;
 130                                                         vactive = <240>;
 131                                                         hback-porch = <38>;
 132                                                         hfront-porch = <20>;
 133                                                         vback-porch = <15>;
 134                                                         vfront-porch = <5>;
 135                                                         hsync-len = <30>;
 136                                                         vsync-len = <3>;
 137                                                         hsync-active = <0>;
 138                                                         vsync-active = <0>;
 139                                                         de-active = <1>;
 140                                                         pixelclk-active = <1>;
 141                                                 };
 142                                         };
 143                                 };
 144                         };
 145                 };
 146
 147                 apbx@80040000 {
 148                         duart: serial@80074000 {
 149                                 pinctrl-names = "default";
 150                                 pinctrl-0 = <&duart_pins_b>;
 151                                 status = "okay";
 152                         };
 153
 154                         usbphy1: usbphy@8007e000 {
 155                                 status = "okay";
 156                         };
 157
 158                         auart0: serial@8006a000 {
 159                                 pinctrl-names = "default";
 160                                 pinctrl-0 = <&auart0_2pins_a>;
 161                                 status = "okay";
 162                         };
 163
 164                         auart3: serial@80070000 {
 165                                 pinctrl-names = "default";
 166                                 pinctrl-0 = <&auart3_2pins_b>;
 167                                 status = "okay";
 168                         };
 169
 170                         pwm: pwm@80064000 {
 171                                 pinctrl-names = "default";
 172                                 pinctrl-0 = <&pwm3_pins_a>;
 173                                 status = "okay";
 174                         };
 175                 };
 176         };
 177
 178         ahb@80080000 {
 179                 usb1: usb@80090000 {
 180                         vbus-supply = <&reg_usb1_vbus>;
 181                         pinctrl-names = "default";
 182                         pinctrl-0 = <&usb1_pins_a>;
 183                         disable-over-current;
 184                         status = "okay";
 185                 };
 186
 187                 mac0: ethernet@800f0000 {
 188                         phy-mode = "rmii";
 189                         pinctrl-names = "default";
 190                         pinctrl-0 = <&mac0_pins_a>;
 191                         phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
 192                         phy-reset-duration = <100>;
 193                         status = "okay";
 194                 };
 195
 196                 mac1: ethernet@800f4000 {
 197                         phy-mode = "rmii";
 198                         pinctrl-names = "default";
 199                         pinctrl-0 = <&mac1_pins_a>;
 200                         status = "okay";
 201                 };
 202         };
 203
 204         backlight {
 205                 compatible = "pwm-backlight";
 206                 pwms = <&pwm 3 5000000>;
 207                 brightness-levels = <0 4 8 16 32 64 128 255>;
 208                 default-brightness-level = <6>;
 209         };
 210
 211         leds {
 212                 compatible = "gpio-leds";
 213                 pinctrl-names = "default";
 214                 pinctrl-0 = <&led_pins_gpio>;
 215
 216                 user1 {
 217                         label = "sd0-led";
 218                         gpios = <&gpio2 26 0>;
 219                         linux,default-trigger = "mmc0";
 220                 };
 221
 222                 user2 {
 223                         label = "sd1-led";
 224                         gpios = <&gpio2 24 0>;
 225                         linux,default-trigger = "mmc2";
 226                 };
 227         };
 228
 229         regulators {
 230                 compatible = "simple-bus";
 231                 #address-cells = <1>;
 232                 #size-cells = <0>;
 233
 234                 reg_3p3v: regulator@0 {
 235                         compatible = "regulator-fixed";
 236                         reg = <0>;
 237                         regulator-name = "3P3V";
 238                         regulator-min-microvolt = <3300000>;
 239                         regulator-max-microvolt = <3300000>;
 240                         regulator-always-on;
 241                 };
 242
 243                 reg_vddio_sd0: regulator@1 {
 244                         compatible = "regulator-fixed";
 245                         reg = <1>;
 246                         regulator-name = "vddio-sd0";
 247                         regulator-min-microvolt = <3300000>;
 248                         regulator-max-microvolt = <3300000>;
 249                         gpio = <&gpio3 29 0>;
 250                 };
 251
 252                 reg_vddio_sd1: regulator@2 {
 253                         compatible = "regulator-fixed";
 254                         reg = <2>;
 255                         regulator-name = "vddio-sd1";
 256                         regulator-min-microvolt = <3300000>;
 257                         regulator-max-microvolt = <3300000>;
 258                         gpio = <&gpio2 19 0>;
 259                 };
 260
 261                 reg_usb1_vbus: regulator@3 {
 262                         compatible = "regulator-fixed";
 263                         reg = <3>;
 264                         regulator-name = "usb1_vbus";
 265                         regulator-min-microvolt = <5000000>;
 266                         regulator-max-microvolt = <5000000>;
 267                         gpio = <&gpio3 8 0>;
 268                         enable-active-high;
 269                 };
 270         };
 271 };