Merge tag 'v3.15-rc1' into perf/urgent
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / imx28-duckbill.dts
1 /*
2  * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
3  *
4  * The code contained herein is licensed under the GNU General Public
5  * License. You may obtain a copy of the GNU General Public License
6  * Version 2 or later at the following locations:
7  *
8  * http://www.opensource.org/licenses/gpl-license.html
9  * http://www.gnu.org/copyleft/gpl.html
10  */
11
12 /dts-v1/;
13 #include "imx28.dtsi"
14
15 / {
16         model = "I2SE Duckbill";
17         compatible = "i2se,duckbill", "fsl,imx28";
18
19         memory {
20                 reg = <0x40000000 0x08000000>;
21         };
22
23         apb@80000000 {
24                 apbh@80000000 {
25                         ssp0: ssp@80010000 {
26                                 compatible = "fsl,imx28-mmc";
27                                 pinctrl-names = "default";
28                                 pinctrl-0 = <&mmc0_8bit_pins_a
29                                         &mmc0_cd_cfg &mmc0_sck_cfg>;
30                                 bus-width = <8>;
31                                 vmmc-supply = <&reg_3p3v>;
32                                 status = "okay";
33                         };
34
35                         pinctrl@80018000 {
36                                 pinctrl-names = "default";
37                                 pinctrl-0 = <&hog_pins_a>;
38
39                                 hog_pins_a: hog@0 {
40                                         reg = <0>;
41                                         fsl,pinmux-ids = <
42                                                 MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */
43                                         >;
44                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
45                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
46                                         fsl,pull-up = <MXS_PULL_DISABLE>;
47                                 };
48
49                                 led_pins_a: led_gpio@0 {
50                                         reg = <0>;
51                                         fsl,pinmux-ids = <
52                                                 MX28_PAD_AUART1_RX__GPIO_3_4
53                                                 MX28_PAD_AUART1_TX__GPIO_3_5
54                                         >;
55                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
56                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
57                                         fsl,pull-up = <MXS_PULL_DISABLE>;
58                                 };
59                         };
60                 };
61
62                 apbx@80040000 {
63                         duart: serial@80074000 {
64                                 pinctrl-names = "default";
65                                 pinctrl-0 = <&duart_pins_a>;
66                                 status = "okay";
67                         };
68
69                         usbphy0: usbphy@8007c000 {
70                                 status = "okay";
71                         };
72                 };
73         };
74
75         ahb@80080000 {
76                 usb0: usb@80080000 {
77                         status = "okay";
78                 };
79
80                 mac0: ethernet@800f0000 {
81                         phy-mode = "rmii";
82                         pinctrl-names = "default";
83                         pinctrl-0 = <&mac0_pins_a>;
84                         phy-supply = <&reg_3p3v>;
85                         phy-reset-gpios = <&gpio4 13 0>;
86                         phy-reset-duration = <100>;
87                         status = "okay";
88                 };
89         };
90
91         regulators {
92                 compatible = "simple-bus";
93                 #address-cells = <1>;
94                 #size-cells = <0>;
95
96                 reg_3p3v: regulator@0 {
97                         compatible = "regulator-fixed";
98                         reg = <0>;
99                         regulator-name = "3P3V";
100                         regulator-min-microvolt = <3300000>;
101                         regulator-max-microvolt = <3300000>;
102                         regulator-always-on;
103                 };
104         };
105
106         leds {
107                 compatible = "gpio-leds";
108                 pinctrl-names = "default";
109                 pinctrl-0 = <&led_pins_a>;
110
111                 status {
112                         label = "duckbill:green:status";
113                         gpios = <&gpio3 5 0>;
114                 };
115
116                 failure {
117                         label = "duckbill:red:status";
118                         gpios = <&gpio3 4 0>;
119                 };
120         };
121 };