Merge tag 'v3.15-rc1' into perf/urgent
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / imx28-apx4devkit.dts
1 /dts-v1/;
2 #include "imx28.dtsi"
3
4 / {
5         model = "Bluegiga APX4 Development Kit";
6         compatible = "bluegiga,apx4devkit", "fsl,imx28";
7
8         memory {
9                 reg = <0x40000000 0x04000000>;
10         };
11
12         apb@80000000 {
13                 apbh@80000000 {
14                         gpmi-nand@8000c000 {
15                                 pinctrl-names = "default";
16                                 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
17                                 status = "okay";
18                         };
19
20                         ssp0: ssp@80010000 {
21                                 compatible = "fsl,imx28-mmc";
22                                 pinctrl-names = "default";
23                                 pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
24                                 bus-width = <4>;
25                                 status = "okay";
26                         };
27
28                         ssp2: ssp@80014000 {
29                                 compatible = "fsl,imx28-mmc";
30                                 pinctrl-names = "default";
31                                 pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
32                                 bus-width = <4>;
33                                 status = "okay";
34                         };
35
36                         pinctrl@80018000 {
37                                 pinctrl-names = "default";
38                                 pinctrl-0 = <&hog_pins_a>;
39
40                                 hog_pins_a: hog@0 {
41                                         reg = <0>;
42                                         fsl,pinmux-ids = <
43                                                 MX28_PAD_GPMI_CE1N__GPIO_0_17
44                                                 MX28_PAD_GPMI_RDY1__GPIO_0_21
45                                                 MX28_PAD_SSP2_MISO__GPIO_2_18
46                                                 MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
47                                                 MX28_PAD_PWM3__GPIO_3_28
48                                                 MX28_PAD_LCD_RESET__GPIO_3_30
49                                                 MX28_PAD_JTAG_RTCK__GPIO_4_20
50                                         >;
51                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
52                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
53                                         fsl,pull-up = <MXS_PULL_DISABLE>;
54                                 };
55
56                                 lcdif_pins_apx4: lcdif-apx4@0 {
57                                         reg = <0>;
58                                         fsl,pinmux-ids = <
59                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
60                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
61                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
62                                                 MX28_PAD_LCD_CS__LCD_ENABLE
63                                         >;
64                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
65                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
66                                         fsl,pull-up = <MXS_PULL_DISABLE>;
67                                 };
68
69                                 mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
70                                         reg = <0>;
71                                         fsl,pinmux-ids = <
72                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
73                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
74                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
75                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
76                                                 MX28_PAD_SSP2_SS1__SSP2_D1
77                                                 MX28_PAD_SSP2_SS2__SSP2_D2
78                                         >;
79                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
80                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
81                                         fsl,pull-up = <MXS_PULL_ENABLE>;
82                                 };
83
84                                 mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
85                                         fsl,pinmux-ids = <
86                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
87                                         >;
88                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
89                                         fsl,pull-up = <MXS_PULL_DISABLE>;
90                                 };
91                         };
92
93                         lcdif@80030000 {
94                                 pinctrl-names = "default";
95                                 pinctrl-0 = <&lcdif_24bit_pins_a
96                                              &lcdif_pins_apx4>;
97                                 display = <&display>;
98                                 status = "okay";
99
100                                 display: display {
101                                         bits-per-pixel = <32>;
102                                         bus-width = <24>;
103
104                                         display-timings {
105                                                 native-mode = <&timing0>;
106                                                 timing0: timing0 {
107                                                         clock-frequency = <30000000>;
108                                                         hactive = <800>;
109                                                         vactive = <480>;
110                                                         hback-porch = <88>;
111                                                         hfront-porch = <40>;
112                                                         vback-porch = <32>;
113                                                         vfront-porch = <13>;
114                                                         hsync-len = <48>;
115                                                         vsync-len = <3>;
116                                                         hsync-active = <1>;
117                                                         vsync-active = <1>;
118                                                         de-active = <1>;
119                                                         pixelclk-active = <0>;
120                                                 };
121                                         };
122                                 };
123                         };
124                 };
125
126                 apbx@80040000 {
127                         saif0: saif@80042000 {
128                                 pinctrl-names = "default";
129                                 pinctrl-0 = <&saif0_pins_a>;
130                                 status = "okay";
131                         };
132
133                         saif1: saif@80046000 {
134                                 pinctrl-names = "default";
135                                 pinctrl-0 = <&saif1_pins_a>;
136                                 fsl,saif-master = <&saif0>;
137                                 status = "okay";
138                         };
139
140                         i2c0: i2c@80058000 {
141                                 pinctrl-names = "default";
142                                 pinctrl-0 = <&i2c0_pins_a>;
143                                 status = "okay";
144
145                                 sgtl5000: codec@0a {
146                                         compatible = "fsl,sgtl5000";
147                                         reg = <0x0a>;
148                                         VDDA-supply = <&reg_3p3v>;
149                                         VDDIO-supply = <&reg_3p3v>;
150                                         clocks = <&saif0>;
151                                 };
152
153                                 pcf8563: rtc@51 {
154                                         compatible = "phg,pcf8563";
155                                         reg = <0x51>;
156                                 };
157                         };
158
159                         duart: serial@80074000 {
160                                 pinctrl-names = "default";
161                                 pinctrl-0 = <&duart_pins_a>;
162                                 status = "okay";
163                         };
164
165                         auart0: serial@8006a000 {
166                                 pinctrl-names = "default";
167                                 pinctrl-0 = <&auart0_pins_a>;
168                                 status = "okay";
169                         };
170
171                         auart1: serial@8006c000 {
172                                 pinctrl-names = "default";
173                                 pinctrl-0 = <&auart1_2pins_a>;
174                                 status = "okay";
175                         };
176
177                         auart2: serial@8006e000 {
178                                 pinctrl-names = "default";
179                                 pinctrl-0 = <&auart2_2pins_a>;
180                                 status = "okay";
181                         };
182                 };
183         };
184
185         ahb@80080000 {
186                 mac0: ethernet@800f0000 {
187                         phy-mode = "rmii";
188                         pinctrl-names = "default";
189                         pinctrl-0 = <&mac0_pins_a>;
190                         status = "okay";
191                 };
192         };
193
194         regulators {
195                 compatible = "simple-bus";
196                 #address-cells = <1>;
197                 #size-cells = <0>;
198
199                 reg_3p3v: regulator@0 {
200                         compatible = "regulator-fixed";
201                         reg = <0>;
202                         regulator-name = "3P3V";
203                         regulator-min-microvolt = <3300000>;
204                         regulator-max-microvolt = <3300000>;
205                         regulator-always-on;
206                 };
207         };
208
209         sound {
210                 compatible = "bluegiga,apx4devkit-sgtl5000",
211                              "fsl,mxs-audio-sgtl5000";
212                 model = "apx4devkit-sgtl5000";
213                 saif-controllers = <&saif0 &saif1>;
214                 audio-codec = <&sgtl5000>;
215         };
216
217         leds {
218                 compatible = "gpio-leds";
219
220                 user {
221                         label = "Heartbeat";
222                         gpios = <&gpio3 28 0>;
223                         linux,default-trigger = "heartbeat";
224                 };
225         };
226 };