arch/arm/boot/dts/imx27.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         aliases {
  16                 serial0 = &uart1;
  17                 serial1 = &uart2;
  18                 serial2 = &uart3;
  19                 serial3 = &uart4;
  20                 serial4 = &uart5;
  21                 serial5 = &uart6;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28         };
  29
  30         avic: avic-interrupt-controller@e0000000 {
  31                 compatible = "fsl,imx27-avic", "fsl,avic";
  32                 interrupt-controller;
  33                 #interrupt-cells = <1>;
  34                 reg = <0x10040000 0x1000>;
  35         };
  36
  37         clocks {
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 osc26m {
  42                         compatible = "fsl,imx-osc26m", "fixed-clock";
  43                         clock-frequency = <26000000>;
  44                 };
  45         };
  46
  47         soc {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "simple-bus";
  51                 interrupt-parent = <&avic>;
  52                 ranges;
  53
  54                 aipi@10000000 { /* AIPI1 */
  55                         compatible = "fsl,aipi-bus", "simple-bus";
  56                         #address-cells = <1>;
  57                         #size-cells = <1>;
  58                         reg = <0x10000000 0x20000>;
  59                         ranges;
  60
  61                         wdog: wdog@10002000 {
  62                                 compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
  63                                 reg = <0x10002000 0x4000>;
  64                                 interrupts = <27>;
  65                         };
  66
  67                         uart1: serial@1000a000 {
  68                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  69                                 reg = <0x1000a000 0x1000>;
  70                                 interrupts = <20>;
  71                                 status = "disabled";
  72                         };
  73
  74                         uart2: serial@1000b000 {
  75                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  76                                 reg = <0x1000b000 0x1000>;
  77                                 interrupts = <19>;
  78                                 status = "disabled";
  79                         };
  80
  81                         uart3: serial@1000c000 {
  82                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  83                                 reg = <0x1000c000 0x1000>;
  84                                 interrupts = <18>;
  85                                 status = "disabled";
  86                         };
  87
  88                         uart4: serial@1000d000 {
  89                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  90                                 reg = <0x1000d000 0x1000>;
  91                                 interrupts = <17>;
  92                                 status = "disabled";
  93                         };
  94
  95                         cspi1: cspi@1000e000 {
  96                                 #address-cells = <1>;
  97                                 #size-cells = <0>;
  98                                 compatible = "fsl,imx27-cspi";
  99                                 reg = <0x1000e000 0x1000>;
 100                                 interrupts = <16>;
 101                                 status = "disabled";
 102                         };
 103
 104                         cspi2: cspi@1000f000 {
 105                                 #address-cells = <1>;
 106                                 #size-cells = <0>;
 107                                 compatible = "fsl,imx27-cspi";
 108                                 reg = <0x1000f000 0x1000>;
 109                                 interrupts = <15>;
 110                                 status = "disabled";
 111                         };
 112
 113                         i2c1: i2c@10012000 {
 114                                 #address-cells = <1>;
 115                                 #size-cells = <0>;
 116                                 compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 117                                 reg = <0x10012000 0x1000>;
 118                                 interrupts = <12>;
 119                                 status = "disabled";
 120                         };
 121
 122                         gpio1: gpio@10015000 {
 123                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 124                                 reg = <0x10015000 0x100>;
 125                                 interrupts = <8>;
 126                                 gpio-controller;
 127                                 #gpio-cells = <2>;
 128                                 interrupt-controller;
 129                                 #interrupt-cells = <2>;
 130                         };
 131
 132                         gpio2: gpio@10015100 {
 133                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 134                                 reg = <0x10015100 0x100>;
 135                                 interrupts = <8>;
 136                                 gpio-controller;
 137                                 #gpio-cells = <2>;
 138                                 interrupt-controller;
 139                                 #interrupt-cells = <2>;
 140                         };
 141
 142                         gpio3: gpio@10015200 {
 143                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 144                                 reg = <0x10015200 0x100>;
 145                                 interrupts = <8>;
 146                                 gpio-controller;
 147                                 #gpio-cells = <2>;
 148                                 interrupt-controller;
 149                                 #interrupt-cells = <2>;
 150                         };
 151
 152                         gpio4: gpio@10015300 {
 153                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 154                                 reg = <0x10015300 0x100>;
 155                                 interrupts = <8>;
 156                                 gpio-controller;
 157                                 #gpio-cells = <2>;
 158                                 interrupt-controller;
 159                                 #interrupt-cells = <2>;
 160                         };
 161
 162                         gpio5: gpio@10015400 {
 163                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 164                                 reg = <0x10015400 0x100>;
 165                                 interrupts = <8>;
 166                                 gpio-controller;
 167                                 #gpio-cells = <2>;
 168                                 interrupt-controller;
 169                                 #interrupt-cells = <2>;
 170                         };
 171
 172                         gpio6: gpio@10015500 {
 173                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 174                                 reg = <0x10015500 0x100>;
 175                                 interrupts = <8>;
 176                                 gpio-controller;
 177                                 #gpio-cells = <2>;
 178                                 interrupt-controller;
 179                                 #interrupt-cells = <2>;
 180                         };
 181
 182                         cspi3: cspi@10017000 {
 183                                 #address-cells = <1>;
 184                                 #size-cells = <0>;
 185                                 compatible = "fsl,imx27-cspi";
 186                                 reg = <0x10017000 0x1000>;
 187                                 interrupts = <6>;
 188                                 status = "disabled";
 189                         };
 190
 191                         uart5: serial@1001b000 {
 192                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 193                                 reg = <0x1001b000 0x1000>;
 194                                 interrupts = <49>;
 195                                 status = "disabled";
 196                         };
 197
 198                         uart6: serial@1001c000 {
 199                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 200                                 reg = <0x1001c000 0x1000>;
 201                                 interrupts = <48>;
 202                                 status = "disabled";
 203                         };
 204
 205                         i2c2: i2c@1001d000 {
 206                                 #address-cells = <1>;
 207                                 #size-cells = <0>;
 208                                 compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 209                                 reg = <0x1001d000 0x1000>;
 210                                 interrupts = <1>;
 211                                 status = "disabled";
 212                         };
 213
 214                 };
 215
 216                 aipi@10020000 { /* AIPI2 */
 217                         compatible = "fsl,aipi-bus", "simple-bus";
 218                         #address-cells = <1>;
 219                         #size-cells = <1>;
 220                         reg = <0x10020000 0x20000>;
 221                         ranges;
 222
 223                         fec: ethernet@1002b000 {
 224                                 compatible = "fsl,imx27-fec";
 225                                 reg = <0x1002b000 0x4000>;
 226                                 interrupts = <50>;
 227                                 status = "disabled";
 228                         };
 229                 };
 230
 231                 nfc: nand@d8000000 {
 232                         #address-cells = <1>;
 233                         #size-cells = <1>;
 234
 235                         compatible = "fsl,imx27-nand";
 236                         reg = <0xd8000000 0x1000>;
 237                         interrupts = <29>;
 238                         status = "disabled";
 239                 };
 240         };
 241 };