arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         aliases {
  17                 gpio0 = &gpio1;
  18                 gpio1 = &gpio2;
  19                 gpio2 = &gpio3;
  20                 gpio3 = &gpio4;
  21                 i2c0 = &i2c1;
  22                 i2c1 = &i2c2;
  23                 i2c2 = &i2c3;
  24                 serial0 = &uart1;
  25                 serial1 = &uart2;
  26                 serial2 = &uart3;
  27                 serial3 = &uart4;
  28                 serial4 = &uart5;
  29                 spi0 = &spi1;
  30                 spi1 = &spi2;
  31                 spi2 = &spi3;
  32                 usb0 = &usbotg;
  33                 usb1 = &usbhost1;
  34         };
  35
  36         cpus {
  37                 #address-cells = <0>;
  38                 #size-cells = <0>;
  39
  40                 cpu {
  41                         compatible = "arm,arm926ej-s";
  42                         device_type = "cpu";
  43                 };
  44         };
  45
  46         asic: asic-interrupt-controller@68000000 {
  47                 compatible = "fsl,imx25-asic", "fsl,avic";
  48                 interrupt-controller;
  49                 #interrupt-cells = <1>;
  50                 reg = <0x68000000 0x8000000>;
  51         };
  52
  53         clocks {
  54                 #address-cells = <1>;
  55                 #size-cells = <0>;
  56
  57                 osc {
  58                         compatible = "fsl,imx-osc", "fixed-clock";
  59                         #clock-cells = <0>;
  60                         clock-frequency = <24000000>;
  61                 };
  62         };
  63
  64         soc {
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67                 compatible = "simple-bus";
  68                 interrupt-parent = <&asic>;
  69                 ranges;
  70
  71                 aips@43f00000 { /* AIPS1 */
  72                         compatible = "fsl,aips-bus", "simple-bus";
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75                         reg = <0x43f00000 0x100000>;
  76                         ranges;
  77
  78                         i2c1: i2c@43f80000 {
  79                                 #address-cells = <1>;
  80                                 #size-cells = <0>;
  81                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  82                                 reg = <0x43f80000 0x4000>;
  83                                 clocks = <&clks 48>;
  84                                 clock-names = "";
  85                                 interrupts = <3>;
  86                                 status = "disabled";
  87                         };
  88
  89                         i2c3: i2c@43f84000 {
  90                                 #address-cells = <1>;
  91                                 #size-cells = <0>;
  92                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  93                                 reg = <0x43f84000 0x4000>;
  94                                 clocks = <&clks 48>;
  95                                 clock-names = "";
  96                                 interrupts = <10>;
  97                                 status = "disabled";
  98                         };
  99
 100                         can1: can@43f88000 {
 101                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 102                                 reg = <0x43f88000 0x4000>;
 103                                 interrupts = <43>;
 104                                 clocks = <&clks 75>, <&clks 75>;
 105                                 clock-names = "ipg", "per";
 106                                 status = "disabled";
 107                         };
 108
 109                         can2: can@43f8c000 {
 110                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 111                                 reg = <0x43f8c000 0x4000>;
 112                                 interrupts = <44>;
 113                                 clocks = <&clks 76>, <&clks 76>;
 114                                 clock-names = "ipg", "per";
 115                                 status = "disabled";
 116                         };
 117
 118                         uart1: serial@43f90000 {
 119                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 120                                 reg = <0x43f90000 0x4000>;
 121                                 interrupts = <45>;
 122                                 clocks = <&clks 120>, <&clks 57>;
 123                                 clock-names = "ipg", "per";
 124                                 status = "disabled";
 125                         };
 126
 127                         uart2: serial@43f94000 {
 128                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 129                                 reg = <0x43f94000 0x4000>;
 130                                 interrupts = <32>;
 131                                 clocks = <&clks 121>, <&clks 57>;
 132                                 clock-names = "ipg", "per";
 133                                 status = "disabled";
 134                         };
 135
 136                         i2c2: i2c@43f98000 {
 137                                 #address-cells = <1>;
 138                                 #size-cells = <0>;
 139                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 140                                 reg = <0x43f98000 0x4000>;
 141                                 clocks = <&clks 48>;
 142                                 clock-names = "";
 143                                 interrupts = <4>;
 144                                 status = "disabled";
 145                         };
 146
 147                         owire@43f9c000 {
 148                                 #address-cells = <1>;
 149                                 #size-cells = <0>;
 150                                 reg = <0x43f9c000 0x4000>;
 151                                 clocks = <&clks 51>;
 152                                 clock-names = "";
 153                                 interrupts = <2>;
 154                                 status = "disabled";
 155                         };
 156
 157                         spi1: cspi@43fa4000 {
 158                                 #address-cells = <1>;
 159                                 #size-cells = <0>;
 160                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 161                                 reg = <0x43fa4000 0x4000>;
 162                                 clocks = <&clks 62>, <&clks 62>;
 163                                 clock-names = "ipg", "per";
 164                                 interrupts = <14>;
 165                                 status = "disabled";
 166                         };
 167
 168                         kpp@43fa8000 {
 169                                 #address-cells = <1>;
 170                                 #size-cells = <0>;
 171                                 reg = <0x43fa8000 0x4000>;
 172                                 clocks = <&clks 102>;
 173                                 clock-names = "";
 174                                 interrupts = <24>;
 175                                 status = "disabled";
 176                         };
 177
 178                         iomuxc: iomuxc@43fac000 {
 179                                 compatible = "fsl,imx25-iomuxc";
 180                                 reg = <0x43fac000 0x4000>;
 181                         };
 182
 183                         audmux: audmux@43fb0000 {
 184                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 185                                 reg = <0x43fb0000 0x4000>;
 186                                 status = "disabled";
 187                         };
 188                 };
 189
 190                 spba@50000000 {
 191                         compatible = "fsl,spba-bus", "simple-bus";
 192                         #address-cells = <1>;
 193                         #size-cells = <1>;
 194                         reg = <0x50000000 0x40000>;
 195                         ranges;
 196
 197                         spi3: cspi@50004000 {
 198                                 #address-cells = <1>;
 199                                 #size-cells = <0>;
 200                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 201                                 reg = <0x50004000 0x4000>;
 202                                 interrupts = <0>;
 203                                 clocks = <&clks 80>, <&clks 80>;
 204                                 clock-names = "ipg", "per";
 205                                 status = "disabled";
 206                         };
 207
 208                         uart4: serial@50008000 {
 209                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 210                                 reg = <0x50008000 0x4000>;
 211                                 interrupts = <5>;
 212                                 clocks = <&clks 123>, <&clks 57>;
 213                                 clock-names = "ipg", "per";
 214                                 status = "disabled";
 215                         };
 216
 217                         uart3: serial@5000c000 {
 218                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 219                                 reg = <0x5000c000 0x4000>;
 220                                 interrupts = <18>;
 221                                 clocks = <&clks 122>, <&clks 57>;
 222                                 clock-names = "ipg", "per";
 223                                 status = "disabled";
 224                         };
 225
 226                         spi2: cspi@50010000 {
 227                                 #address-cells = <1>;
 228                                 #size-cells = <0>;
 229                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 230                                 reg = <0x50010000 0x4000>;
 231                                 clocks = <&clks 79>, <&clks 79>;
 232                                 clock-names = "ipg", "per";
 233                                 interrupts = <13>;
 234                                 status = "disabled";
 235                         };
 236
 237                         ssi2: ssi@50014000 {
 238                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 239                                 reg = <0x50014000 0x4000>;
 240                                 interrupts = <11>;
 241                                 clocks = <&clks 118>;
 242                                 clock-names = "ipg";
 243                                 dmas = <&sdma 24 1 0>,
 244                                        <&sdma 25 1 0>;
 245                                 dma-names = "rx", "tx";
 246                                 status = "disabled";
 247                         };
 248
 249                         esai@50018000 {
 250                                 reg = <0x50018000 0x4000>;
 251                                 interrupts = <7>;
 252                         };
 253
 254                         uart5: serial@5002c000 {
 255                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 256                                 reg = <0x5002c000 0x4000>;
 257                                 interrupts = <40>;
 258                                 clocks = <&clks 124>, <&clks 57>;
 259                                 clock-names = "ipg", "per";
 260                                 status = "disabled";
 261                         };
 262
 263                         tsc: tsc@50030000 {
 264                                 compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
 265                                 reg = <0x50030000 0x4000>;
 266                                 interrupts = <46>;
 267                                 clocks = <&clks 119>;
 268                                 clock-names = "ipg";
 269                                 status = "disabled";
 270                         };
 271
 272                         ssi1: ssi@50034000 {
 273                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 274                                 reg = <0x50034000 0x4000>;
 275                                 interrupts = <12>;
 276                                 clocks = <&clks 117>;
 277                                 clock-names = "ipg";
 278                                 dmas = <&sdma 28 1 0>,
 279                                        <&sdma 29 1 0>;
 280                                 dma-names = "rx", "tx";
 281                                 status = "disabled";
 282                         };
 283
 284                         fec: ethernet@50038000 {
 285                                 compatible = "fsl,imx25-fec";
 286                                 reg = <0x50038000 0x4000>;
 287                                 interrupts = <57>;
 288                                 clocks = <&clks 88>, <&clks 65>;
 289                                 clock-names = "ipg", "ahb";
 290                                 status = "disabled";
 291                         };
 292                 };
 293
 294                 aips@53f00000 { /* AIPS2 */
 295                         compatible = "fsl,aips-bus", "simple-bus";
 296                         #address-cells = <1>;
 297                         #size-cells = <1>;
 298                         reg = <0x53f00000 0x100000>;
 299                         ranges;
 300
 301                         clks: ccm@53f80000 {
 302                                 compatible = "fsl,imx25-ccm";
 303                                 reg = <0x53f80000 0x4000>;
 304                                 interrupts = <31>;
 305                                 #clock-cells = <1>;
 306                         };
 307
 308                         gpt4: timer@53f84000 {
 309                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 310                                 reg = <0x53f84000 0x4000>;
 311                                 clocks = <&clks 9>, <&clks 45>;
 312                                 clock-names = "ipg", "per";
 313                                 interrupts = <1>;
 314                         };
 315
 316                         gpt3: timer@53f88000 {
 317                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 318                                 reg = <0x53f88000 0x4000>;
 319                                 clocks = <&clks 9>, <&clks 47>;
 320                                 clock-names = "ipg", "per";
 321                                 interrupts = <29>;
 322                         };
 323
 324                         gpt2: timer@53f8c000 {
 325                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 326                                 reg = <0x53f8c000 0x4000>;
 327                                 clocks = <&clks 9>, <&clks 47>;
 328                                 clock-names = "ipg", "per";
 329                                 interrupts = <53>;
 330                         };
 331
 332                         gpt1: timer@53f90000 {
 333                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 334                                 reg = <0x53f90000 0x4000>;
 335                                 clocks = <&clks 9>, <&clks 47>;
 336                                 clock-names = "ipg", "per";
 337                                 interrupts = <54>;
 338                         };
 339
 340                         epit1: timer@53f94000 {
 341                                 compatible = "fsl,imx25-epit";
 342                                 reg = <0x53f94000 0x4000>;
 343                                 interrupts = <28>;
 344                         };
 345
 346                         epit2: timer@53f98000 {
 347                                 compatible = "fsl,imx25-epit";
 348                                 reg = <0x53f98000 0x4000>;
 349                                 interrupts = <27>;
 350                         };
 351
 352                         gpio4: gpio@53f9c000 {
 353                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 354                                 reg = <0x53f9c000 0x4000>;
 355                                 interrupts = <23>;
 356                                 gpio-controller;
 357                                 #gpio-cells = <2>;
 358                                 interrupt-controller;
 359                                 #interrupt-cells = <2>;
 360                         };
 361
 362                         pwm2: pwm@53fa0000 {
 363                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 364                                 #pwm-cells = <2>;
 365                                 reg = <0x53fa0000 0x4000>;
 366                                 clocks = <&clks 106>, <&clks 36>;
 367                                 clock-names = "ipg", "per";
 368                                 interrupts = <36>;
 369                         };
 370
 371                         gpio3: gpio@53fa4000 {
 372                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 373                                 reg = <0x53fa4000 0x4000>;
 374                                 interrupts = <16>;
 375                                 gpio-controller;
 376                                 #gpio-cells = <2>;
 377                                 interrupt-controller;
 378                                 #interrupt-cells = <2>;
 379                         };
 380
 381                         pwm3: pwm@53fa8000 {
 382                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 383                                 #pwm-cells = <2>;
 384                                 reg = <0x53fa8000 0x4000>;
 385                                 clocks = <&clks 107>, <&clks 36>;
 386                                 clock-names = "ipg", "per";
 387                                 interrupts = <41>;
 388                         };
 389
 390                         esdhc1: esdhc@53fb4000 {
 391                                 compatible = "fsl,imx25-esdhc";
 392                                 reg = <0x53fb4000 0x4000>;
 393                                 interrupts = <9>;
 394                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 395                                 clock-names = "ipg", "ahb", "per";
 396                                 status = "disabled";
 397                         };
 398
 399                         esdhc2: esdhc@53fb8000 {
 400                                 compatible = "fsl,imx25-esdhc";
 401                                 reg = <0x53fb8000 0x4000>;
 402                                 interrupts = <8>;
 403                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 404                                 clock-names = "ipg", "ahb", "per";
 405                                 status = "disabled";
 406                         };
 407
 408                         lcdc: lcdc@53fbc000 {
 409                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 410                                 reg = <0x53fbc000 0x4000>;
 411                                 interrupts = <39>;
 412                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 413                                 clock-names = "ipg", "ahb", "per";
 414                                 status = "disabled";
 415                         };
 416
 417                         slcdc@53fc0000 {
 418                                 reg = <0x53fc0000 0x4000>;
 419                                 interrupts = <38>;
 420                                 status = "disabled";
 421                         };
 422
 423                         pwm4: pwm@53fc8000 {
 424                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 425                                 reg = <0x53fc8000 0x4000>;
 426                                 clocks = <&clks 108>, <&clks 36>;
 427                                 clock-names = "ipg", "per";
 428                                 interrupts = <42>;
 429                         };
 430
 431                         gpio1: gpio@53fcc000 {
 432                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 433                                 reg = <0x53fcc000 0x4000>;
 434                                 interrupts = <52>;
 435                                 gpio-controller;
 436                                 #gpio-cells = <2>;
 437                                 interrupt-controller;
 438                                 #interrupt-cells = <2>;
 439                         };
 440
 441                         gpio2: gpio@53fd0000 {
 442                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 443                                 reg = <0x53fd0000 0x4000>;
 444                                 interrupts = <51>;
 445                                 gpio-controller;
 446                                 #gpio-cells = <2>;
 447                                 interrupt-controller;
 448                                 #interrupt-cells = <2>;
 449                         };
 450
 451                         sdma: sdma@53fd4000 {
 452                                 compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
 453                                 reg = <0x53fd4000 0x4000>;
 454                                 clocks = <&clks 112>, <&clks 68>;
 455                                 clock-names = "ipg", "ahb";
 456                                 #dma-cells = <3>;
 457                                 interrupts = <34>;
 458                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 459                         };
 460
 461                         wdog@53fdc000 {
 462                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 463                                 reg = <0x53fdc000 0x4000>;
 464                                 clocks = <&clks 126>;
 465                                 clock-names = "";
 466                                 interrupts = <55>;
 467                         };
 468
 469                         pwm1: pwm@53fe0000 {
 470                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 471                                 #pwm-cells = <2>;
 472                                 reg = <0x53fe0000 0x4000>;
 473                                 clocks = <&clks 105>, <&clks 36>;
 474                                 clock-names = "ipg", "per";
 475                                 interrupts = <26>;
 476                         };
 477
 478                         iim: iim@53ff0000 {
 479                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 480                                 reg = <0x53ff0000 0x4000>;
 481                                 interrupts = <19>;
 482                                 clocks = <&clks 99>;
 483                         };
 484
 485                         usbphy1: usbphy@1 {
 486                                 compatible = "nop-usbphy";
 487                                 status = "disabled";
 488                         };
 489
 490                         usbphy2: usbphy@2 {
 491                                 compatible = "nop-usbphy";
 492                                 status = "disabled";
 493                         };
 494
 495                         usbotg: usb@53ff4000 {
 496                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 497                                 reg = <0x53ff4000 0x0200>;
 498                                 interrupts = <37>;
 499                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 500                                 clock-names = "ipg", "ahb", "per";
 501                                 fsl,usbmisc = <&usbmisc 0>;
 502                                 status = "disabled";
 503                         };
 504
 505                         usbhost1: usb@53ff4400 {
 506                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 507                                 reg = <0x53ff4400 0x0200>;
 508                                 interrupts = <35>;
 509                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 510                                 clock-names = "ipg", "ahb", "per";
 511                                 fsl,usbmisc = <&usbmisc 1>;
 512                                 status = "disabled";
 513                         };
 514
 515                         usbmisc: usbmisc@53ff4600 {
 516                                 #index-cells = <1>;
 517                                 compatible = "fsl,imx25-usbmisc";
 518                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 519                                 clock-names = "ipg", "ahb", "per";
 520                                 reg = <0x53ff4600 0x00f>;
 521                                 status = "disabled";
 522                         };
 523
 524                         dryice@53ffc000 {
 525                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 526                                 reg = <0x53ffc000 0x4000>;
 527                                 clocks = <&clks 81>;
 528                                 clock-names = "ipg";
 529                                 interrupts = <25>;
 530                         };
 531                 };
 532
 533                 emi@80000000 {
 534                         compatible = "fsl,emi-bus", "simple-bus";
 535                         #address-cells = <1>;
 536                         #size-cells = <1>;
 537                         reg = <0x80000000 0x3b002000>;
 538                         ranges;
 539
 540                         nfc: nand@bb000000 {
 541                                 #address-cells = <1>;
 542                                 #size-cells = <1>;
 543
 544                                 compatible = "fsl,imx25-nand";
 545                                 reg = <0xbb000000 0x2000>;
 546                                 clocks = <&clks 50>;
 547                                 clock-names = "";
 548                                 interrupts = <33>;
 549                                 status = "disabled";
 550                         };
 551                 };
 552         };
 553 };