arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18         /*
  19          * The decompressor and also some bootloaders rely on a
  20          * pre-existing /chosen node to be available to insert the
  21          * command line and merge other ATAGS info.
  22          * Also for U-Boot there must be a pre-existing /memory node.
  23          */
  24         chosen {};
  25         memory { device_type = "memory"; reg = <0 0>; };
  26
  27         aliases {
  28                 ethernet0 = &fec;
  29                 gpio0 = &gpio1;
  30                 gpio1 = &gpio2;
  31                 gpio2 = &gpio3;
  32                 gpio3 = &gpio4;
  33                 i2c0 = &i2c1;
  34                 i2c1 = &i2c2;
  35                 i2c2 = &i2c3;
  36                 mmc0 = &esdhc1;
  37                 mmc1 = &esdhc2;
  38                 pwm0 = &pwm1;
  39                 pwm1 = &pwm2;
  40                 pwm2 = &pwm3;
  41                 pwm3 = &pwm4;
  42                 serial0 = &uart1;
  43                 serial1 = &uart2;
  44                 serial2 = &uart3;
  45                 serial3 = &uart4;
  46                 serial4 = &uart5;
  47                 spi0 = &spi1;
  48                 spi1 = &spi2;
  49                 spi2 = &spi3;
  50                 usb0 = &usbotg;
  51                 usb1 = &usbhost1;
  52         };
  53
  54         cpus {
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57
  58                 cpu@0 {
  59                         compatible = "arm,arm926ej-s";
  60                         device_type = "cpu";
  61                         reg = <0>;
  62                 };
  63         };
  64
  65         asic: asic-interrupt-controller@68000000 {
  66                 compatible = "fsl,imx25-asic", "fsl,avic";
  67                 interrupt-controller;
  68                 #interrupt-cells = <1>;
  69                 reg = <0x68000000 0x8000000>;
  70         };
  71
  72         clocks {
  73                 #address-cells = <1>;
  74                 #size-cells = <0>;
  75
  76                 osc {
  77                         compatible = "fsl,imx-osc", "fixed-clock";
  78                         #clock-cells = <0>;
  79                         clock-frequency = <24000000>;
  80                 };
  81         };
  82
  83         soc {
  84                 #address-cells = <1>;
  85                 #size-cells = <1>;
  86                 compatible = "simple-bus";
  87                 interrupt-parent = <&asic>;
  88                 ranges;
  89
  90                 aips@43f00000 { /* AIPS1 */
  91                         compatible = "fsl,aips-bus", "simple-bus";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94                         reg = <0x43f00000 0x100000>;
  95                         ranges;
  96
  97                         aips1: bridge@43f00000 {
  98                                 compatible = "fsl,imx25-aips";
  99                                 reg = <0x43f00000 0x4000>;
 100                         };
 101
 102                         i2c1: i2c@43f80000 {
 103                                 #address-cells = <1>;
 104                                 #size-cells = <0>;
 105                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 106                                 reg = <0x43f80000 0x4000>;
 107                                 clocks = <&clks 48>;
 108                                 clock-names = "";
 109                                 interrupts = <3>;
 110                                 status = "disabled";
 111                         };
 112
 113                         i2c3: i2c@43f84000 {
 114                                 #address-cells = <1>;
 115                                 #size-cells = <0>;
 116                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 117                                 reg = <0x43f84000 0x4000>;
 118                                 clocks = <&clks 48>;
 119                                 clock-names = "";
 120                                 interrupts = <10>;
 121                                 status = "disabled";
 122                         };
 123
 124                         can1: can@43f88000 {
 125                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 126                                 reg = <0x43f88000 0x4000>;
 127                                 interrupts = <43>;
 128                                 clocks = <&clks 75>, <&clks 75>;
 129                                 clock-names = "ipg", "per";
 130                                 status = "disabled";
 131                         };
 132
 133                         can2: can@43f8c000 {
 134                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 135                                 reg = <0x43f8c000 0x4000>;
 136                                 interrupts = <44>;
 137                                 clocks = <&clks 76>, <&clks 76>;
 138                                 clock-names = "ipg", "per";
 139                                 status = "disabled";
 140                         };
 141
 142                         uart1: serial@43f90000 {
 143                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 144                                 reg = <0x43f90000 0x4000>;
 145                                 interrupts = <45>;
 146                                 clocks = <&clks 120>, <&clks 57>;
 147                                 clock-names = "ipg", "per";
 148                                 status = "disabled";
 149                         };
 150
 151                         uart2: serial@43f94000 {
 152                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 153                                 reg = <0x43f94000 0x4000>;
 154                                 interrupts = <32>;
 155                                 clocks = <&clks 121>, <&clks 57>;
 156                                 clock-names = "ipg", "per";
 157                                 status = "disabled";
 158                         };
 159
 160                         i2c2: i2c@43f98000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 164                                 reg = <0x43f98000 0x4000>;
 165                                 clocks = <&clks 48>;
 166                                 clock-names = "";
 167                                 interrupts = <4>;
 168                                 status = "disabled";
 169                         };
 170
 171                         owire@43f9c000 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 reg = <0x43f9c000 0x4000>;
 175                                 clocks = <&clks 51>;
 176                                 clock-names = "";
 177                                 interrupts = <2>;
 178                                 status = "disabled";
 179                         };
 180
 181                         spi1: cspi@43fa4000 {
 182                                 #address-cells = <1>;
 183                                 #size-cells = <0>;
 184                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 185                                 reg = <0x43fa4000 0x4000>;
 186                                 clocks = <&clks 78>, <&clks 78>;
 187                                 clock-names = "ipg", "per";
 188                                 interrupts = <14>;
 189                                 status = "disabled";
 190                         };
 191
 192                         kpp: kpp@43fa8000 {
 193                                 #address-cells = <1>;
 194                                 #size-cells = <0>;
 195                                 compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 196                                 reg = <0x43fa8000 0x4000>;
 197                                 clocks = <&clks 102>;
 198                                 clock-names = "";
 199                                 interrupts = <24>;
 200                                 status = "disabled";
 201                         };
 202
 203                         iomuxc: iomuxc@43fac000 {
 204                                 compatible = "fsl,imx25-iomuxc";
 205                                 reg = <0x43fac000 0x4000>;
 206                         };
 207
 208                         audmux: audmux@43fb0000 {
 209                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 210                                 reg = <0x43fb0000 0x4000>;
 211                                 status = "disabled";
 212                         };
 213                 };
 214
 215                 spba@50000000 {
 216                         compatible = "fsl,spba-bus", "simple-bus";
 217                         #address-cells = <1>;
 218                         #size-cells = <1>;
 219                         reg = <0x50000000 0x40000>;
 220                         ranges;
 221
 222                         spi3: cspi@50004000 {
 223                                 #address-cells = <1>;
 224                                 #size-cells = <0>;
 225                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 226                                 reg = <0x50004000 0x4000>;
 227                                 interrupts = <0>;
 228                                 clocks = <&clks 80>, <&clks 80>;
 229                                 clock-names = "ipg", "per";
 230                                 status = "disabled";
 231                         };
 232
 233                         uart4: serial@50008000 {
 234                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 235                                 reg = <0x50008000 0x4000>;
 236                                 interrupts = <5>;
 237                                 clocks = <&clks 123>, <&clks 57>;
 238                                 clock-names = "ipg", "per";
 239                                 status = "disabled";
 240                         };
 241
 242                         uart3: serial@5000c000 {
 243                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 244                                 reg = <0x5000c000 0x4000>;
 245                                 interrupts = <18>;
 246                                 clocks = <&clks 122>, <&clks 57>;
 247                                 clock-names = "ipg", "per";
 248                                 status = "disabled";
 249                         };
 250
 251                         spi2: cspi@50010000 {
 252                                 #address-cells = <1>;
 253                                 #size-cells = <0>;
 254                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 255                                 reg = <0x50010000 0x4000>;
 256                                 clocks = <&clks 79>, <&clks 79>;
 257                                 clock-names = "ipg", "per";
 258                                 interrupts = <13>;
 259                                 status = "disabled";
 260                         };
 261
 262                         ssi2: ssi@50014000 {
 263                                 #sound-dai-cells = <0>;
 264                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 265                                 reg = <0x50014000 0x4000>;
 266                                 interrupts = <11>;
 267                                 clocks = <&clks 118>;
 268                                 clock-names = "ipg";
 269                                 dmas = <&sdma 24 1 0>,
 270                                        <&sdma 25 1 0>;
 271                                 dma-names = "rx", "tx";
 272                                 status = "disabled";
 273                         };
 274
 275                         esai@50018000 {
 276                                 reg = <0x50018000 0x4000>;
 277                                 interrupts = <7>;
 278                         };
 279
 280                         uart5: serial@5002c000 {
 281                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 282                                 reg = <0x5002c000 0x4000>;
 283                                 interrupts = <40>;
 284                                 clocks = <&clks 124>, <&clks 57>;
 285                                 clock-names = "ipg", "per";
 286                                 status = "disabled";
 287                         };
 288
 289                         tscadc: tscadc@50030000 {
 290                                 compatible = "fsl,imx25-tsadc";
 291                                 reg = <0x50030000 0xc>;
 292                                 interrupts = <46>;
 293                                 clocks = <&clks 119>;
 294                                 clock-names = "ipg";
 295                                 interrupt-controller;
 296                                 #interrupt-cells = <1>;
 297                                 #address-cells = <1>;
 298                                 #size-cells = <1>;
 299                                 status = "disabled";
 300
 301                                 adc: adc@50030800 {
 302                                         compatible = "fsl,imx25-gcq";
 303                                         reg = <0x50030800 0x60>;
 304                                         interrupt-parent = <&tscadc>;
 305                                         interrupts = <1>;
 306                                         #address-cells = <1>;
 307                                         #size-cells = <0>;
 308                                         status = "disabled";
 309                                 };
 310
 311                                 tsc: tcq@50030400 {
 312                                         compatible = "fsl,imx25-tcq";
 313                                         reg = <0x50030400 0x60>;
 314                                         interrupt-parent = <&tscadc>;
 315                                         interrupts = <0>;
 316                                         fsl,wires = <4>;
 317                                         status = "disabled";
 318                                 };
 319                         };
 320
 321                         ssi1: ssi@50034000 {
 322                                 #sound-dai-cells = <0>;
 323                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 324                                 reg = <0x50034000 0x4000>;
 325                                 interrupts = <12>;
 326                                 clocks = <&clks 117>;
 327                                 clock-names = "ipg";
 328                                 dmas = <&sdma 28 1 0>,
 329                                        <&sdma 29 1 0>;
 330                                 dma-names = "rx", "tx";
 331                                 status = "disabled";
 332                         };
 333
 334                         fec: ethernet@50038000 {
 335                                 compatible = "fsl,imx25-fec";
 336                                 reg = <0x50038000 0x4000>;
 337                                 interrupts = <57>;
 338                                 clocks = <&clks 88>, <&clks 65>;
 339                                 clock-names = "ipg", "ahb";
 340                                 status = "disabled";
 341                         };
 342                 };
 343
 344                 aips@53f00000 { /* AIPS2 */
 345                         compatible = "fsl,aips-bus", "simple-bus";
 346                         #address-cells = <1>;
 347                         #size-cells = <1>;
 348                         reg = <0x53f00000 0x100000>;
 349                         ranges;
 350
 351                         aips2: bridge@53f00000 {
 352                                 compatible = "fsl,imx25-aips";
 353                                 reg = <0x53f00000 0x4000>;
 354                         };
 355
 356                         clks: ccm@53f80000 {
 357                                 compatible = "fsl,imx25-ccm";
 358                                 reg = <0x53f80000 0x4000>;
 359                                 interrupts = <31>;
 360                                 #clock-cells = <1>;
 361                         };
 362
 363                         gpt4: timer@53f84000 {
 364                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 365                                 reg = <0x53f84000 0x4000>;
 366                                 clocks = <&clks 95>, <&clks 47>;
 367                                 clock-names = "ipg", "per";
 368                                 interrupts = <1>;
 369                         };
 370
 371                         gpt3: timer@53f88000 {
 372                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 373                                 reg = <0x53f88000 0x4000>;
 374                                 clocks = <&clks 94>, <&clks 47>;
 375                                 clock-names = "ipg", "per";
 376                                 interrupts = <29>;
 377                         };
 378
 379                         gpt2: timer@53f8c000 {
 380                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 381                                 reg = <0x53f8c000 0x4000>;
 382                                 clocks = <&clks 93>, <&clks 47>;
 383                                 clock-names = "ipg", "per";
 384                                 interrupts = <53>;
 385                         };
 386
 387                         gpt1: timer@53f90000 {
 388                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 389                                 reg = <0x53f90000 0x4000>;
 390                                 clocks = <&clks 92>, <&clks 47>;
 391                                 clock-names = "ipg", "per";
 392                                 interrupts = <54>;
 393                         };
 394
 395                         epit1: timer@53f94000 {
 396                                 compatible = "fsl,imx25-epit";
 397                                 reg = <0x53f94000 0x4000>;
 398                                 interrupts = <28>;
 399                         };
 400
 401                         epit2: timer@53f98000 {
 402                                 compatible = "fsl,imx25-epit";
 403                                 reg = <0x53f98000 0x4000>;
 404                                 interrupts = <27>;
 405                         };
 406
 407                         gpio4: gpio@53f9c000 {
 408                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 409                                 reg = <0x53f9c000 0x4000>;
 410                                 interrupts = <23>;
 411                                 gpio-controller;
 412                                 #gpio-cells = <2>;
 413                                 interrupt-controller;
 414                                 #interrupt-cells = <2>;
 415                         };
 416
 417                         pwm2: pwm@53fa0000 {
 418                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 419                                 #pwm-cells = <2>;
 420                                 reg = <0x53fa0000 0x4000>;
 421                                 clocks = <&clks 106>, <&clks 52>;
 422                                 clock-names = "ipg", "per";
 423                                 interrupts = <36>;
 424                         };
 425
 426                         gpio3: gpio@53fa4000 {
 427                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 428                                 reg = <0x53fa4000 0x4000>;
 429                                 interrupts = <16>;
 430                                 gpio-controller;
 431                                 #gpio-cells = <2>;
 432                                 interrupt-controller;
 433                                 #interrupt-cells = <2>;
 434                         };
 435
 436                         pwm3: pwm@53fa8000 {
 437                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 438                                 #pwm-cells = <2>;
 439                                 reg = <0x53fa8000 0x4000>;
 440                                 clocks = <&clks 107>, <&clks 52>;
 441                                 clock-names = "ipg", "per";
 442                                 interrupts = <41>;
 443                         };
 444
 445                         scc: crypto@53fac000 {
 446                                 compatible = "fsl,imx25-scc";
 447                                 reg = <0x53fac000 0x4000>;
 448                                 clocks = <&clks 111>;
 449                                 clock-names = "ipg";
 450                                 interrupts = <49>, <50>;
 451                                 interrupt-names = "scm", "smn";
 452                         };
 453
 454                         esdhc1: esdhc@53fb4000 {
 455                                 compatible = "fsl,imx25-esdhc";
 456                                 reg = <0x53fb4000 0x4000>;
 457                                 interrupts = <9>;
 458                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 459                                 clock-names = "ipg", "ahb", "per";
 460                                 status = "disabled";
 461                         };
 462
 463                         esdhc2: esdhc@53fb8000 {
 464                                 compatible = "fsl,imx25-esdhc";
 465                                 reg = <0x53fb8000 0x4000>;
 466                                 interrupts = <8>;
 467                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 468                                 clock-names = "ipg", "ahb", "per";
 469                                 status = "disabled";
 470                         };
 471
 472                         lcdc: lcdc@53fbc000 {
 473                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 474                                 reg = <0x53fbc000 0x4000>;
 475                                 interrupts = <39>;
 476                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 477                                 clock-names = "ipg", "ahb", "per";
 478                                 status = "disabled";
 479                         };
 480
 481                         slcdc@53fc0000 {
 482                                 reg = <0x53fc0000 0x4000>;
 483                                 interrupts = <38>;
 484                                 status = "disabled";
 485                         };
 486
 487                         pwm4: pwm@53fc8000 {
 488                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 489                                 #pwm-cells = <2>;
 490                                 reg = <0x53fc8000 0x4000>;
 491                                 clocks = <&clks 108>, <&clks 52>;
 492                                 clock-names = "ipg", "per";
 493                                 interrupts = <42>;
 494                         };
 495
 496                         gpio1: gpio@53fcc000 {
 497                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 498                                 reg = <0x53fcc000 0x4000>;
 499                                 interrupts = <52>;
 500                                 gpio-controller;
 501                                 #gpio-cells = <2>;
 502                                 interrupt-controller;
 503                                 #interrupt-cells = <2>;
 504                         };
 505
 506                         gpio2: gpio@53fd0000 {
 507                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 508                                 reg = <0x53fd0000 0x4000>;
 509                                 interrupts = <51>;
 510                                 gpio-controller;
 511                                 #gpio-cells = <2>;
 512                                 interrupt-controller;
 513                                 #interrupt-cells = <2>;
 514                         };
 515
 516                         sdma: sdma@53fd4000 {
 517                                 compatible = "fsl,imx25-sdma";
 518                                 reg = <0x53fd4000 0x4000>;
 519                                 clocks = <&clks 112>, <&clks 68>;
 520                                 clock-names = "ipg", "ahb";
 521                                 #dma-cells = <3>;
 522                                 interrupts = <34>;
 523                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 524                         };
 525
 526                         wdog@53fdc000 {
 527                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 528                                 reg = <0x53fdc000 0x4000>;
 529                                 clocks = <&clks 126>;
 530                                 clock-names = "";
 531                                 interrupts = <55>;
 532                         };
 533
 534                         pwm1: pwm@53fe0000 {
 535                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 536                                 #pwm-cells = <2>;
 537                                 reg = <0x53fe0000 0x4000>;
 538                                 clocks = <&clks 105>, <&clks 52>;
 539                                 clock-names = "ipg", "per";
 540                                 interrupts = <26>;
 541                         };
 542
 543                         iim: iim@53ff0000 {
 544                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 545                                 reg = <0x53ff0000 0x4000>;
 546                                 interrupts = <19>;
 547                                 clocks = <&clks 99>;
 548                         };
 549
 550                         usbotg: usb@53ff4000 {
 551                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 552                                 reg = <0x53ff4000 0x0200>;
 553                                 interrupts = <37>;
 554                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 555                                 clock-names = "ipg", "ahb", "per";
 556                                 fsl,usbmisc = <&usbmisc 0>;
 557                                 fsl,usbphy = <&usbphy0>;
 558                                 phy_type = "utmi";
 559                                 dr_mode = "otg";
 560                                 status = "disabled";
 561                         };
 562
 563                         usbhost1: usb@53ff4400 {
 564                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 565                                 reg = <0x53ff4400 0x0200>;
 566                                 interrupts = <35>;
 567                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 568                                 clock-names = "ipg", "ahb", "per";
 569                                 fsl,usbmisc = <&usbmisc 1>;
 570                                 fsl,usbphy = <&usbphy1>;
 571                                 status = "disabled";
 572                         };
 573
 574                         usbmisc: usbmisc@53ff4600 {
 575                                 #index-cells = <1>;
 576                                 compatible = "fsl,imx25-usbmisc";
 577                                 reg = <0x53ff4600 0x00f>;
 578                         };
 579
 580                         dryice@53ffc000 {
 581                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 582                                 reg = <0x53ffc000 0x4000>;
 583                                 clocks = <&clks 81>;
 584                                 clock-names = "ipg";
 585                                 interrupts = <25 56>;
 586                         };
 587                 };
 588
 589                 iram: sram@78000000 {
 590                         compatible = "mmio-sram";
 591                         reg = <0x78000000 0x20000>;
 592                 };
 593
 594                 emi@80000000 {
 595                         compatible = "fsl,emi-bus", "simple-bus";
 596                         #address-cells = <1>;
 597                         #size-cells = <1>;
 598                         reg = <0x80000000 0x3b002000>;
 599                         ranges;
 600
 601                         nfc: nand@bb000000 {
 602                                 #address-cells = <1>;
 603                                 #size-cells = <1>;
 604
 605                                 compatible = "fsl,imx25-nand";
 606                                 reg = <0xbb000000 0x2000>;
 607                                 clocks = <&clks 50>;
 608                                 clock-names = "";
 609                                 interrupts = <33>;
 610                                 status = "disabled";
 611                         };
 612                 };
 613         };
 614
 615         usbphy {
 616                 compatible = "simple-bus";
 617                 #address-cells = <1>;
 618                 #size-cells = <0>;
 619
 620                 usbphy0: usb-phy@0 {
 621                         reg = <0>;
 622                         compatible = "usb-nop-xceiv";
 623                 };
 624
 625                 usbphy1: usb-phy@1 {
 626                         reg = <1>;
 627                         compatible = "usb-nop-xceiv";
 628                 };
 629         };
 630 };