arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         aliases {
  17                 ethernet0 = &fec;
  18                 gpio0 = &gpio1;
  19                 gpio1 = &gpio2;
  20                 gpio2 = &gpio3;
  21                 gpio3 = &gpio4;
  22                 i2c0 = &i2c1;
  23                 i2c1 = &i2c2;
  24                 i2c2 = &i2c3;
  25                 mmc0 = &esdhc1;
  26                 mmc1 = &esdhc2;
  27                 serial0 = &uart1;
  28                 serial1 = &uart2;
  29                 serial2 = &uart3;
  30                 serial3 = &uart4;
  31                 serial4 = &uart5;
  32                 spi0 = &spi1;
  33                 spi1 = &spi2;
  34                 spi2 = &spi3;
  35                 usb0 = &usbotg;
  36                 usb1 = &usbhost1;
  37         };
  38
  39         cpus {
  40                 #address-cells = <0>;
  41                 #size-cells = <0>;
  42
  43                 cpu {
  44                         compatible = "arm,arm926ej-s";
  45                         device_type = "cpu";
  46                 };
  47         };
  48
  49         asic: asic-interrupt-controller@68000000 {
  50                 compatible = "fsl,imx25-asic", "fsl,avic";
  51                 interrupt-controller;
  52                 #interrupt-cells = <1>;
  53                 reg = <0x68000000 0x8000000>;
  54         };
  55
  56         clocks {
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 osc {
  61                         compatible = "fsl,imx-osc", "fixed-clock";
  62                         #clock-cells = <0>;
  63                         clock-frequency = <24000000>;
  64                 };
  65         };
  66
  67         soc {
  68                 #address-cells = <1>;
  69                 #size-cells = <1>;
  70                 compatible = "simple-bus";
  71                 interrupt-parent = <&asic>;
  72                 ranges;
  73
  74                 aips@43f00000 { /* AIPS1 */
  75                         compatible = "fsl,aips-bus", "simple-bus";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78                         reg = <0x43f00000 0x100000>;
  79                         ranges;
  80
  81                         i2c1: i2c@43f80000 {
  82                                 #address-cells = <1>;
  83                                 #size-cells = <0>;
  84                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  85                                 reg = <0x43f80000 0x4000>;
  86                                 clocks = <&clks 48>;
  87                                 clock-names = "";
  88                                 interrupts = <3>;
  89                                 status = "disabled";
  90                         };
  91
  92                         i2c3: i2c@43f84000 {
  93                                 #address-cells = <1>;
  94                                 #size-cells = <0>;
  95                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  96                                 reg = <0x43f84000 0x4000>;
  97                                 clocks = <&clks 48>;
  98                                 clock-names = "";
  99                                 interrupts = <10>;
 100                                 status = "disabled";
 101                         };
 102
 103                         can1: can@43f88000 {
 104                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 105                                 reg = <0x43f88000 0x4000>;
 106                                 interrupts = <43>;
 107                                 clocks = <&clks 75>, <&clks 75>;
 108                                 clock-names = "ipg", "per";
 109                                 status = "disabled";
 110                         };
 111
 112                         can2: can@43f8c000 {
 113                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 114                                 reg = <0x43f8c000 0x4000>;
 115                                 interrupts = <44>;
 116                                 clocks = <&clks 76>, <&clks 76>;
 117                                 clock-names = "ipg", "per";
 118                                 status = "disabled";
 119                         };
 120
 121                         uart1: serial@43f90000 {
 122                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 123                                 reg = <0x43f90000 0x4000>;
 124                                 interrupts = <45>;
 125                                 clocks = <&clks 120>, <&clks 57>;
 126                                 clock-names = "ipg", "per";
 127                                 status = "disabled";
 128                         };
 129
 130                         uart2: serial@43f94000 {
 131                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 132                                 reg = <0x43f94000 0x4000>;
 133                                 interrupts = <32>;
 134                                 clocks = <&clks 121>, <&clks 57>;
 135                                 clock-names = "ipg", "per";
 136                                 status = "disabled";
 137                         };
 138
 139                         i2c2: i2c@43f98000 {
 140                                 #address-cells = <1>;
 141                                 #size-cells = <0>;
 142                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 143                                 reg = <0x43f98000 0x4000>;
 144                                 clocks = <&clks 48>;
 145                                 clock-names = "";
 146                                 interrupts = <4>;
 147                                 status = "disabled";
 148                         };
 149
 150                         owire@43f9c000 {
 151                                 #address-cells = <1>;
 152                                 #size-cells = <0>;
 153                                 reg = <0x43f9c000 0x4000>;
 154                                 clocks = <&clks 51>;
 155                                 clock-names = "";
 156                                 interrupts = <2>;
 157                                 status = "disabled";
 158                         };
 159
 160                         spi1: cspi@43fa4000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 164                                 reg = <0x43fa4000 0x4000>;
 165                                 clocks = <&clks 62>, <&clks 62>;
 166                                 clock-names = "ipg", "per";
 167                                 interrupts = <14>;
 168                                 status = "disabled";
 169                         };
 170
 171                         kpp: kpp@43fa8000 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 175                                 reg = <0x43fa8000 0x4000>;
 176                                 clocks = <&clks 102>;
 177                                 clock-names = "";
 178                                 interrupts = <24>;
 179                                 status = "disabled";
 180                         };
 181
 182                         iomuxc: iomuxc@43fac000 {
 183                                 compatible = "fsl,imx25-iomuxc";
 184                                 reg = <0x43fac000 0x4000>;
 185                         };
 186
 187                         audmux: audmux@43fb0000 {
 188                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 189                                 reg = <0x43fb0000 0x4000>;
 190                                 status = "disabled";
 191                         };
 192                 };
 193
 194                 spba@50000000 {
 195                         compatible = "fsl,spba-bus", "simple-bus";
 196                         #address-cells = <1>;
 197                         #size-cells = <1>;
 198                         reg = <0x50000000 0x40000>;
 199                         ranges;
 200
 201                         spi3: cspi@50004000 {
 202                                 #address-cells = <1>;
 203                                 #size-cells = <0>;
 204                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 205                                 reg = <0x50004000 0x4000>;
 206                                 interrupts = <0>;
 207                                 clocks = <&clks 80>, <&clks 80>;
 208                                 clock-names = "ipg", "per";
 209                                 status = "disabled";
 210                         };
 211
 212                         uart4: serial@50008000 {
 213                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 214                                 reg = <0x50008000 0x4000>;
 215                                 interrupts = <5>;
 216                                 clocks = <&clks 123>, <&clks 57>;
 217                                 clock-names = "ipg", "per";
 218                                 status = "disabled";
 219                         };
 220
 221                         uart3: serial@5000c000 {
 222                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 223                                 reg = <0x5000c000 0x4000>;
 224                                 interrupts = <18>;
 225                                 clocks = <&clks 122>, <&clks 57>;
 226                                 clock-names = "ipg", "per";
 227                                 status = "disabled";
 228                         };
 229
 230                         spi2: cspi@50010000 {
 231                                 #address-cells = <1>;
 232                                 #size-cells = <0>;
 233                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 234                                 reg = <0x50010000 0x4000>;
 235                                 clocks = <&clks 79>, <&clks 79>;
 236                                 clock-names = "ipg", "per";
 237                                 interrupts = <13>;
 238                                 status = "disabled";
 239                         };
 240
 241                         ssi2: ssi@50014000 {
 242                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 243                                 reg = <0x50014000 0x4000>;
 244                                 interrupts = <11>;
 245                                 clocks = <&clks 118>;
 246                                 clock-names = "ipg";
 247                                 dmas = <&sdma 24 1 0>,
 248                                        <&sdma 25 1 0>;
 249                                 dma-names = "rx", "tx";
 250                                 status = "disabled";
 251                         };
 252
 253                         esai@50018000 {
 254                                 reg = <0x50018000 0x4000>;
 255                                 interrupts = <7>;
 256                         };
 257
 258                         uart5: serial@5002c000 {
 259                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 260                                 reg = <0x5002c000 0x4000>;
 261                                 interrupts = <40>;
 262                                 clocks = <&clks 124>, <&clks 57>;
 263                                 clock-names = "ipg", "per";
 264                                 status = "disabled";
 265                         };
 266
 267                         tsc: tsc@50030000 {
 268                                 compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
 269                                 reg = <0x50030000 0x4000>;
 270                                 interrupts = <46>;
 271                                 clocks = <&clks 119>;
 272                                 clock-names = "ipg";
 273                                 status = "disabled";
 274                         };
 275
 276                         ssi1: ssi@50034000 {
 277                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 278                                 reg = <0x50034000 0x4000>;
 279                                 interrupts = <12>;
 280                                 clocks = <&clks 117>;
 281                                 clock-names = "ipg";
 282                                 dmas = <&sdma 28 1 0>,
 283                                        <&sdma 29 1 0>;
 284                                 dma-names = "rx", "tx";
 285                                 status = "disabled";
 286                         };
 287
 288                         fec: ethernet@50038000 {
 289                                 compatible = "fsl,imx25-fec";
 290                                 reg = <0x50038000 0x4000>;
 291                                 interrupts = <57>;
 292                                 clocks = <&clks 88>, <&clks 65>;
 293                                 clock-names = "ipg", "ahb";
 294                                 status = "disabled";
 295                         };
 296                 };
 297
 298                 aips@53f00000 { /* AIPS2 */
 299                         compatible = "fsl,aips-bus", "simple-bus";
 300                         #address-cells = <1>;
 301                         #size-cells = <1>;
 302                         reg = <0x53f00000 0x100000>;
 303                         ranges;
 304
 305                         clks: ccm@53f80000 {
 306                                 compatible = "fsl,imx25-ccm";
 307                                 reg = <0x53f80000 0x4000>;
 308                                 interrupts = <31>;
 309                                 #clock-cells = <1>;
 310                         };
 311
 312                         gpt4: timer@53f84000 {
 313                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 314                                 reg = <0x53f84000 0x4000>;
 315                                 clocks = <&clks 9>, <&clks 45>;
 316                                 clock-names = "ipg", "per";
 317                                 interrupts = <1>;
 318                         };
 319
 320                         gpt3: timer@53f88000 {
 321                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 322                                 reg = <0x53f88000 0x4000>;
 323                                 clocks = <&clks 9>, <&clks 47>;
 324                                 clock-names = "ipg", "per";
 325                                 interrupts = <29>;
 326                         };
 327
 328                         gpt2: timer@53f8c000 {
 329                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 330                                 reg = <0x53f8c000 0x4000>;
 331                                 clocks = <&clks 9>, <&clks 47>;
 332                                 clock-names = "ipg", "per";
 333                                 interrupts = <53>;
 334                         };
 335
 336                         gpt1: timer@53f90000 {
 337                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 338                                 reg = <0x53f90000 0x4000>;
 339                                 clocks = <&clks 9>, <&clks 47>;
 340                                 clock-names = "ipg", "per";
 341                                 interrupts = <54>;
 342                         };
 343
 344                         epit1: timer@53f94000 {
 345                                 compatible = "fsl,imx25-epit";
 346                                 reg = <0x53f94000 0x4000>;
 347                                 interrupts = <28>;
 348                         };
 349
 350                         epit2: timer@53f98000 {
 351                                 compatible = "fsl,imx25-epit";
 352                                 reg = <0x53f98000 0x4000>;
 353                                 interrupts = <27>;
 354                         };
 355
 356                         gpio4: gpio@53f9c000 {
 357                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 358                                 reg = <0x53f9c000 0x4000>;
 359                                 interrupts = <23>;
 360                                 gpio-controller;
 361                                 #gpio-cells = <2>;
 362                                 interrupt-controller;
 363                                 #interrupt-cells = <2>;
 364                         };
 365
 366                         pwm2: pwm@53fa0000 {
 367                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 368                                 #pwm-cells = <2>;
 369                                 reg = <0x53fa0000 0x4000>;
 370                                 clocks = <&clks 106>, <&clks 36>;
 371                                 clock-names = "ipg", "per";
 372                                 interrupts = <36>;
 373                         };
 374
 375                         gpio3: gpio@53fa4000 {
 376                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 377                                 reg = <0x53fa4000 0x4000>;
 378                                 interrupts = <16>;
 379                                 gpio-controller;
 380                                 #gpio-cells = <2>;
 381                                 interrupt-controller;
 382                                 #interrupt-cells = <2>;
 383                         };
 384
 385                         pwm3: pwm@53fa8000 {
 386                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 387                                 #pwm-cells = <2>;
 388                                 reg = <0x53fa8000 0x4000>;
 389                                 clocks = <&clks 107>, <&clks 36>;
 390                                 clock-names = "ipg", "per";
 391                                 interrupts = <41>;
 392                         };
 393
 394                         esdhc1: esdhc@53fb4000 {
 395                                 compatible = "fsl,imx25-esdhc";
 396                                 reg = <0x53fb4000 0x4000>;
 397                                 interrupts = <9>;
 398                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 399                                 clock-names = "ipg", "ahb", "per";
 400                                 status = "disabled";
 401                         };
 402
 403                         esdhc2: esdhc@53fb8000 {
 404                                 compatible = "fsl,imx25-esdhc";
 405                                 reg = <0x53fb8000 0x4000>;
 406                                 interrupts = <8>;
 407                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 408                                 clock-names = "ipg", "ahb", "per";
 409                                 status = "disabled";
 410                         };
 411
 412                         lcdc: lcdc@53fbc000 {
 413                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 414                                 reg = <0x53fbc000 0x4000>;
 415                                 interrupts = <39>;
 416                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 417                                 clock-names = "ipg", "ahb", "per";
 418                                 status = "disabled";
 419                         };
 420
 421                         slcdc@53fc0000 {
 422                                 reg = <0x53fc0000 0x4000>;
 423                                 interrupts = <38>;
 424                                 status = "disabled";
 425                         };
 426
 427                         pwm4: pwm@53fc8000 {
 428                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 429                                 reg = <0x53fc8000 0x4000>;
 430                                 clocks = <&clks 108>, <&clks 36>;
 431                                 clock-names = "ipg", "per";
 432                                 interrupts = <42>;
 433                         };
 434
 435                         gpio1: gpio@53fcc000 {
 436                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 437                                 reg = <0x53fcc000 0x4000>;
 438                                 interrupts = <52>;
 439                                 gpio-controller;
 440                                 #gpio-cells = <2>;
 441                                 interrupt-controller;
 442                                 #interrupt-cells = <2>;
 443                         };
 444
 445                         gpio2: gpio@53fd0000 {
 446                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 447                                 reg = <0x53fd0000 0x4000>;
 448                                 interrupts = <51>;
 449                                 gpio-controller;
 450                                 #gpio-cells = <2>;
 451                                 interrupt-controller;
 452                                 #interrupt-cells = <2>;
 453                         };
 454
 455                         sdma: sdma@53fd4000 {
 456                                 compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
 457                                 reg = <0x53fd4000 0x4000>;
 458                                 clocks = <&clks 112>, <&clks 68>;
 459                                 clock-names = "ipg", "ahb";
 460                                 #dma-cells = <3>;
 461                                 interrupts = <34>;
 462                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 463                         };
 464
 465                         wdog@53fdc000 {
 466                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 467                                 reg = <0x53fdc000 0x4000>;
 468                                 clocks = <&clks 126>;
 469                                 clock-names = "";
 470                                 interrupts = <55>;
 471                         };
 472
 473                         pwm1: pwm@53fe0000 {
 474                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 475                                 #pwm-cells = <2>;
 476                                 reg = <0x53fe0000 0x4000>;
 477                                 clocks = <&clks 105>, <&clks 36>;
 478                                 clock-names = "ipg", "per";
 479                                 interrupts = <26>;
 480                         };
 481
 482                         iim: iim@53ff0000 {
 483                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 484                                 reg = <0x53ff0000 0x4000>;
 485                                 interrupts = <19>;
 486                                 clocks = <&clks 99>;
 487                         };
 488
 489                         usbotg: usb@53ff4000 {
 490                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 491                                 reg = <0x53ff4000 0x0200>;
 492                                 interrupts = <37>;
 493                                 clocks = <&clks 70>;
 494                                 fsl,usbmisc = <&usbmisc 0>;
 495                                 fsl,usbphy = <&usbphy0>;
 496                                 status = "disabled";
 497                         };
 498
 499                         usbhost1: usb@53ff4400 {
 500                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 501                                 reg = <0x53ff4400 0x0200>;
 502                                 interrupts = <35>;
 503                                 clocks = <&clks 70>;
 504                                 fsl,usbmisc = <&usbmisc 1>;
 505                                 fsl,usbphy = <&usbphy1>;
 506                                 status = "disabled";
 507                         };
 508
 509                         usbmisc: usbmisc@53ff4600 {
 510                                 #index-cells = <1>;
 511                                 compatible = "fsl,imx25-usbmisc";
 512                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 513                                 clock-names = "ipg", "ahb", "per";
 514                                 reg = <0x53ff4600 0x00f>;
 515                         };
 516
 517                         dryice@53ffc000 {
 518                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 519                                 reg = <0x53ffc000 0x4000>;
 520                                 clocks = <&clks 81>;
 521                                 clock-names = "ipg";
 522                                 interrupts = <25>;
 523                         };
 524                 };
 525
 526                 iram: sram@78000000 {
 527                         compatible = "mmio-sram";
 528                         reg = <0x78000000 0x20000>;
 529                 };
 530
 531                 emi@80000000 {
 532                         compatible = "fsl,emi-bus", "simple-bus";
 533                         #address-cells = <1>;
 534                         #size-cells = <1>;
 535                         reg = <0x80000000 0x3b002000>;
 536                         ranges;
 537
 538                         nfc: nand@bb000000 {
 539                                 #address-cells = <1>;
 540                                 #size-cells = <1>;
 541
 542                                 compatible = "fsl,imx25-nand";
 543                                 reg = <0xbb000000 0x2000>;
 544                                 clocks = <&clks 50>;
 545                                 clock-names = "";
 546                                 interrupts = <33>;
 547                                 status = "disabled";
 548                         };
 549                 };
 550         };
 551
 552         usbphy {
 553                 compatible = "simple-bus";
 554                 #address-cells = <1>;
 555                 #size-cells = <0>;
 556
 557                 usbphy0: usb-phy@0 {
 558                         reg = <0>;
 559                         compatible = "usb-nop-xceiv";
 560                 };
 561
 562                 usbphy1: usb-phy@1 {
 563                         reg = <1>;
 564                         compatible = "usb-nop-xceiv";
 565                 };
 566         };
 567 };