arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         aliases {
  17                 ethernet0 = &fec;
  18                 gpio0 = &gpio1;
  19                 gpio1 = &gpio2;
  20                 gpio2 = &gpio3;
  21                 gpio3 = &gpio4;
  22                 i2c0 = &i2c1;
  23                 i2c1 = &i2c2;
  24                 i2c2 = &i2c3;
  25                 mmc0 = &esdhc1;
  26                 mmc1 = &esdhc2;
  27                 serial0 = &uart1;
  28                 serial1 = &uart2;
  29                 serial2 = &uart3;
  30                 serial3 = &uart4;
  31                 serial4 = &uart5;
  32                 spi0 = &spi1;
  33                 spi1 = &spi2;
  34                 spi2 = &spi3;
  35                 usb0 = &usbotg;
  36                 usb1 = &usbhost1;
  37         };
  38
  39         cpus {
  40                 #address-cells = <0>;
  41                 #size-cells = <0>;
  42
  43                 cpu {
  44                         compatible = "arm,arm926ej-s";
  45                         device_type = "cpu";
  46                 };
  47         };
  48
  49         asic: asic-interrupt-controller@68000000 {
  50                 compatible = "fsl,imx25-asic", "fsl,avic";
  51                 interrupt-controller;
  52                 #interrupt-cells = <1>;
  53                 reg = <0x68000000 0x8000000>;
  54         };
  55
  56         clocks {
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 osc {
  61                         compatible = "fsl,imx-osc", "fixed-clock";
  62                         #clock-cells = <0>;
  63                         clock-frequency = <24000000>;
  64                 };
  65         };
  66
  67         soc {
  68                 #address-cells = <1>;
  69                 #size-cells = <1>;
  70                 compatible = "simple-bus";
  71                 interrupt-parent = <&asic>;
  72                 ranges;
  73
  74                 aips@43f00000 { /* AIPS1 */
  75                         compatible = "fsl,aips-bus", "simple-bus";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78                         reg = <0x43f00000 0x100000>;
  79                         ranges;
  80
  81                         i2c1: i2c@43f80000 {
  82                                 #address-cells = <1>;
  83                                 #size-cells = <0>;
  84                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  85                                 reg = <0x43f80000 0x4000>;
  86                                 clocks = <&clks 48>;
  87                                 clock-names = "";
  88                                 interrupts = <3>;
  89                                 status = "disabled";
  90                         };
  91
  92                         i2c3: i2c@43f84000 {
  93                                 #address-cells = <1>;
  94                                 #size-cells = <0>;
  95                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  96                                 reg = <0x43f84000 0x4000>;
  97                                 clocks = <&clks 48>;
  98                                 clock-names = "";
  99                                 interrupts = <10>;
 100                                 status = "disabled";
 101                         };
 102
 103                         can1: can@43f88000 {
 104                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 105                                 reg = <0x43f88000 0x4000>;
 106                                 interrupts = <43>;
 107                                 clocks = <&clks 75>, <&clks 75>;
 108                                 clock-names = "ipg", "per";
 109                                 status = "disabled";
 110                         };
 111
 112                         can2: can@43f8c000 {
 113                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 114                                 reg = <0x43f8c000 0x4000>;
 115                                 interrupts = <44>;
 116                                 clocks = <&clks 76>, <&clks 76>;
 117                                 clock-names = "ipg", "per";
 118                                 status = "disabled";
 119                         };
 120
 121                         uart1: serial@43f90000 {
 122                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 123                                 reg = <0x43f90000 0x4000>;
 124                                 interrupts = <45>;
 125                                 clocks = <&clks 120>, <&clks 57>;
 126                                 clock-names = "ipg", "per";
 127                                 status = "disabled";
 128                         };
 129
 130                         uart2: serial@43f94000 {
 131                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 132                                 reg = <0x43f94000 0x4000>;
 133                                 interrupts = <32>;
 134                                 clocks = <&clks 121>, <&clks 57>;
 135                                 clock-names = "ipg", "per";
 136                                 status = "disabled";
 137                         };
 138
 139                         i2c2: i2c@43f98000 {
 140                                 #address-cells = <1>;
 141                                 #size-cells = <0>;
 142                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 143                                 reg = <0x43f98000 0x4000>;
 144                                 clocks = <&clks 48>;
 145                                 clock-names = "";
 146                                 interrupts = <4>;
 147                                 status = "disabled";
 148                         };
 149
 150                         owire@43f9c000 {
 151                                 #address-cells = <1>;
 152                                 #size-cells = <0>;
 153                                 reg = <0x43f9c000 0x4000>;
 154                                 clocks = <&clks 51>;
 155                                 clock-names = "";
 156                                 interrupts = <2>;
 157                                 status = "disabled";
 158                         };
 159
 160                         spi1: cspi@43fa4000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 164                                 reg = <0x43fa4000 0x4000>;
 165                                 clocks = <&clks 62>, <&clks 62>;
 166                                 clock-names = "ipg", "per";
 167                                 interrupts = <14>;
 168                                 status = "disabled";
 169                         };
 170
 171                         kpp: kpp@43fa8000 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 175                                 reg = <0x43fa8000 0x4000>;
 176                                 clocks = <&clks 102>;
 177                                 clock-names = "";
 178                                 interrupts = <24>;
 179                                 status = "disabled";
 180                         };
 181
 182                         iomuxc: iomuxc@43fac000 {
 183                                 compatible = "fsl,imx25-iomuxc";
 184                                 reg = <0x43fac000 0x4000>;
 185                         };
 186
 187                         audmux: audmux@43fb0000 {
 188                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 189                                 reg = <0x43fb0000 0x4000>;
 190                                 status = "disabled";
 191                         };
 192                 };
 193
 194                 spba@50000000 {
 195                         compatible = "fsl,spba-bus", "simple-bus";
 196                         #address-cells = <1>;
 197                         #size-cells = <1>;
 198                         reg = <0x50000000 0x40000>;
 199                         ranges;
 200
 201                         spi3: cspi@50004000 {
 202                                 #address-cells = <1>;
 203                                 #size-cells = <0>;
 204                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 205                                 reg = <0x50004000 0x4000>;
 206                                 interrupts = <0>;
 207                                 clocks = <&clks 80>, <&clks 80>;
 208                                 clock-names = "ipg", "per";
 209                                 status = "disabled";
 210                         };
 211
 212                         uart4: serial@50008000 {
 213                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 214                                 reg = <0x50008000 0x4000>;
 215                                 interrupts = <5>;
 216                                 clocks = <&clks 123>, <&clks 57>;
 217                                 clock-names = "ipg", "per";
 218                                 status = "disabled";
 219                         };
 220
 221                         uart3: serial@5000c000 {
 222                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 223                                 reg = <0x5000c000 0x4000>;
 224                                 interrupts = <18>;
 225                                 clocks = <&clks 122>, <&clks 57>;
 226                                 clock-names = "ipg", "per";
 227                                 status = "disabled";
 228                         };
 229
 230                         spi2: cspi@50010000 {
 231                                 #address-cells = <1>;
 232                                 #size-cells = <0>;
 233                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 234                                 reg = <0x50010000 0x4000>;
 235                                 clocks = <&clks 79>, <&clks 79>;
 236                                 clock-names = "ipg", "per";
 237                                 interrupts = <13>;
 238                                 status = "disabled";
 239                         };
 240
 241                         ssi2: ssi@50014000 {
 242                                 #sound-dai-cells = <0>;
 243                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 244                                 reg = <0x50014000 0x4000>;
 245                                 interrupts = <11>;
 246                                 clocks = <&clks 118>;
 247                                 clock-names = "ipg";
 248                                 dmas = <&sdma 24 1 0>,
 249                                        <&sdma 25 1 0>;
 250                                 dma-names = "rx", "tx";
 251                                 status = "disabled";
 252                         };
 253
 254                         esai@50018000 {
 255                                 reg = <0x50018000 0x4000>;
 256                                 interrupts = <7>;
 257                         };
 258
 259                         uart5: serial@5002c000 {
 260                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 261                                 reg = <0x5002c000 0x4000>;
 262                                 interrupts = <40>;
 263                                 clocks = <&clks 124>, <&clks 57>;
 264                                 clock-names = "ipg", "per";
 265                                 status = "disabled";
 266                         };
 267
 268                         tsc: tsc@50030000 {
 269                                 compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
 270                                 reg = <0x50030000 0x4000>;
 271                                 interrupts = <46>;
 272                                 clocks = <&clks 119>;
 273                                 clock-names = "ipg";
 274                                 status = "disabled";
 275                         };
 276
 277                         ssi1: ssi@50034000 {
 278                                 #sound-dai-cells = <0>;
 279                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 280                                 reg = <0x50034000 0x4000>;
 281                                 interrupts = <12>;
 282                                 clocks = <&clks 117>;
 283                                 clock-names = "ipg";
 284                                 dmas = <&sdma 28 1 0>,
 285                                        <&sdma 29 1 0>;
 286                                 dma-names = "rx", "tx";
 287                                 status = "disabled";
 288                         };
 289
 290                         fec: ethernet@50038000 {
 291                                 compatible = "fsl,imx25-fec";
 292                                 reg = <0x50038000 0x4000>;
 293                                 interrupts = <57>;
 294                                 clocks = <&clks 88>, <&clks 65>;
 295                                 clock-names = "ipg", "ahb";
 296                                 status = "disabled";
 297                         };
 298                 };
 299
 300                 aips@53f00000 { /* AIPS2 */
 301                         compatible = "fsl,aips-bus", "simple-bus";
 302                         #address-cells = <1>;
 303                         #size-cells = <1>;
 304                         reg = <0x53f00000 0x100000>;
 305                         ranges;
 306
 307                         clks: ccm@53f80000 {
 308                                 compatible = "fsl,imx25-ccm";
 309                                 reg = <0x53f80000 0x4000>;
 310                                 interrupts = <31>;
 311                                 #clock-cells = <1>;
 312                         };
 313
 314                         gpt4: timer@53f84000 {
 315                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 316                                 reg = <0x53f84000 0x4000>;
 317                                 clocks = <&clks 95>, <&clks 47>;
 318                                 clock-names = "ipg", "per";
 319                                 interrupts = <1>;
 320                         };
 321
 322                         gpt3: timer@53f88000 {
 323                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 324                                 reg = <0x53f88000 0x4000>;
 325                                 clocks = <&clks 94>, <&clks 47>;
 326                                 clock-names = "ipg", "per";
 327                                 interrupts = <29>;
 328                         };
 329
 330                         gpt2: timer@53f8c000 {
 331                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 332                                 reg = <0x53f8c000 0x4000>;
 333                                 clocks = <&clks 93>, <&clks 47>;
 334                                 clock-names = "ipg", "per";
 335                                 interrupts = <53>;
 336                         };
 337
 338                         gpt1: timer@53f90000 {
 339                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 340                                 reg = <0x53f90000 0x4000>;
 341                                 clocks = <&clks 92>, <&clks 47>;
 342                                 clock-names = "ipg", "per";
 343                                 interrupts = <54>;
 344                         };
 345
 346                         epit1: timer@53f94000 {
 347                                 compatible = "fsl,imx25-epit";
 348                                 reg = <0x53f94000 0x4000>;
 349                                 interrupts = <28>;
 350                         };
 351
 352                         epit2: timer@53f98000 {
 353                                 compatible = "fsl,imx25-epit";
 354                                 reg = <0x53f98000 0x4000>;
 355                                 interrupts = <27>;
 356                         };
 357
 358                         gpio4: gpio@53f9c000 {
 359                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 360                                 reg = <0x53f9c000 0x4000>;
 361                                 interrupts = <23>;
 362                                 gpio-controller;
 363                                 #gpio-cells = <2>;
 364                                 interrupt-controller;
 365                                 #interrupt-cells = <2>;
 366                         };
 367
 368                         pwm2: pwm@53fa0000 {
 369                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 370                                 #pwm-cells = <2>;
 371                                 reg = <0x53fa0000 0x4000>;
 372                                 clocks = <&clks 106>, <&clks 36>;
 373                                 clock-names = "ipg", "per";
 374                                 interrupts = <36>;
 375                         };
 376
 377                         gpio3: gpio@53fa4000 {
 378                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 379                                 reg = <0x53fa4000 0x4000>;
 380                                 interrupts = <16>;
 381                                 gpio-controller;
 382                                 #gpio-cells = <2>;
 383                                 interrupt-controller;
 384                                 #interrupt-cells = <2>;
 385                         };
 386
 387                         pwm3: pwm@53fa8000 {
 388                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 389                                 #pwm-cells = <2>;
 390                                 reg = <0x53fa8000 0x4000>;
 391                                 clocks = <&clks 107>, <&clks 36>;
 392                                 clock-names = "ipg", "per";
 393                                 interrupts = <41>;
 394                         };
 395
 396                         esdhc1: esdhc@53fb4000 {
 397                                 compatible = "fsl,imx25-esdhc";
 398                                 reg = <0x53fb4000 0x4000>;
 399                                 interrupts = <9>;
 400                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 401                                 clock-names = "ipg", "ahb", "per";
 402                                 status = "disabled";
 403                         };
 404
 405                         esdhc2: esdhc@53fb8000 {
 406                                 compatible = "fsl,imx25-esdhc";
 407                                 reg = <0x53fb8000 0x4000>;
 408                                 interrupts = <8>;
 409                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 410                                 clock-names = "ipg", "ahb", "per";
 411                                 status = "disabled";
 412                         };
 413
 414                         lcdc: lcdc@53fbc000 {
 415                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 416                                 reg = <0x53fbc000 0x4000>;
 417                                 interrupts = <39>;
 418                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 419                                 clock-names = "ipg", "ahb", "per";
 420                                 status = "disabled";
 421                         };
 422
 423                         slcdc@53fc0000 {
 424                                 reg = <0x53fc0000 0x4000>;
 425                                 interrupts = <38>;
 426                                 status = "disabled";
 427                         };
 428
 429                         pwm4: pwm@53fc8000 {
 430                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 431                                 reg = <0x53fc8000 0x4000>;
 432                                 clocks = <&clks 108>, <&clks 36>;
 433                                 clock-names = "ipg", "per";
 434                                 interrupts = <42>;
 435                         };
 436
 437                         gpio1: gpio@53fcc000 {
 438                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 439                                 reg = <0x53fcc000 0x4000>;
 440                                 interrupts = <52>;
 441                                 gpio-controller;
 442                                 #gpio-cells = <2>;
 443                                 interrupt-controller;
 444                                 #interrupt-cells = <2>;
 445                         };
 446
 447                         gpio2: gpio@53fd0000 {
 448                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 449                                 reg = <0x53fd0000 0x4000>;
 450                                 interrupts = <51>;
 451                                 gpio-controller;
 452                                 #gpio-cells = <2>;
 453                                 interrupt-controller;
 454                                 #interrupt-cells = <2>;
 455                         };
 456
 457                         sdma: sdma@53fd4000 {
 458                                 compatible = "fsl,imx25-sdma";
 459                                 reg = <0x53fd4000 0x4000>;
 460                                 clocks = <&clks 112>, <&clks 68>;
 461                                 clock-names = "ipg", "ahb";
 462                                 #dma-cells = <3>;
 463                                 interrupts = <34>;
 464                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 465                         };
 466
 467                         wdog@53fdc000 {
 468                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 469                                 reg = <0x53fdc000 0x4000>;
 470                                 clocks = <&clks 126>;
 471                                 clock-names = "";
 472                                 interrupts = <55>;
 473                         };
 474
 475                         pwm1: pwm@53fe0000 {
 476                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 477                                 #pwm-cells = <2>;
 478                                 reg = <0x53fe0000 0x4000>;
 479                                 clocks = <&clks 105>, <&clks 36>;
 480                                 clock-names = "ipg", "per";
 481                                 interrupts = <26>;
 482                         };
 483
 484                         iim: iim@53ff0000 {
 485                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 486                                 reg = <0x53ff0000 0x4000>;
 487                                 interrupts = <19>;
 488                                 clocks = <&clks 99>;
 489                         };
 490
 491                         usbotg: usb@53ff4000 {
 492                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 493                                 reg = <0x53ff4000 0x0200>;
 494                                 interrupts = <37>;
 495                                 clocks = <&clks 70>;
 496                                 fsl,usbmisc = <&usbmisc 0>;
 497                                 fsl,usbphy = <&usbphy0>;
 498                                 status = "disabled";
 499                         };
 500
 501                         usbhost1: usb@53ff4400 {
 502                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 503                                 reg = <0x53ff4400 0x0200>;
 504                                 interrupts = <35>;
 505                                 clocks = <&clks 70>;
 506                                 fsl,usbmisc = <&usbmisc 1>;
 507                                 fsl,usbphy = <&usbphy1>;
 508                                 status = "disabled";
 509                         };
 510
 511                         usbmisc: usbmisc@53ff4600 {
 512                                 #index-cells = <1>;
 513                                 compatible = "fsl,imx25-usbmisc";
 514                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 515                                 clock-names = "ipg", "ahb", "per";
 516                                 reg = <0x53ff4600 0x00f>;
 517                         };
 518
 519                         dryice@53ffc000 {
 520                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 521                                 reg = <0x53ffc000 0x4000>;
 522                                 clocks = <&clks 81>;
 523                                 clock-names = "ipg";
 524                                 interrupts = <25>;
 525                         };
 526                 };
 527
 528                 iram: sram@78000000 {
 529                         compatible = "mmio-sram";
 530                         reg = <0x78000000 0x20000>;
 531                 };
 532
 533                 emi@80000000 {
 534                         compatible = "fsl,emi-bus", "simple-bus";
 535                         #address-cells = <1>;
 536                         #size-cells = <1>;
 537                         reg = <0x80000000 0x3b002000>;
 538                         ranges;
 539
 540                         nfc: nand@bb000000 {
 541                                 #address-cells = <1>;
 542                                 #size-cells = <1>;
 543
 544                                 compatible = "fsl,imx25-nand";
 545                                 reg = <0xbb000000 0x2000>;
 546                                 clocks = <&clks 50>;
 547                                 clock-names = "";
 548                                 interrupts = <33>;
 549                                 status = "disabled";
 550                         };
 551                 };
 552         };
 553
 554         usbphy {
 555                 compatible = "simple-bus";
 556                 #address-cells = <1>;
 557                 #size-cells = <0>;
 558
 559                 usbphy0: usb-phy@0 {
 560                         reg = <0>;
 561                         compatible = "usb-nop-xceiv";
 562                 };
 563
 564                 usbphy1: usb-phy@1 {
 565                         reg = <1>;
 566                         compatible = "usb-nop-xceiv";
 567                 };
 568         };
 569 };