arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18         /*
  19          * The decompressor and also some bootloaders rely on a
  20          * pre-existing /chosen node to be available to insert the
  21          * command line and merge other ATAGS info.
  22          * Also for U-Boot there must be a pre-existing /memory node.
  23          */
  24         chosen {};
  25         memory { device_type = "memory"; reg = <0 0>; };
  26
  27         aliases {
  28                 ethernet0 = &fec;
  29                 gpio0 = &gpio1;
  30                 gpio1 = &gpio2;
  31                 gpio2 = &gpio3;
  32                 gpio3 = &gpio4;
  33                 i2c0 = &i2c1;
  34                 i2c1 = &i2c2;
  35                 i2c2 = &i2c3;
  36                 mmc0 = &esdhc1;
  37                 mmc1 = &esdhc2;
  38                 pwm0 = &pwm1;
  39                 pwm1 = &pwm2;
  40                 pwm2 = &pwm3;
  41                 pwm3 = &pwm4;
  42                 serial0 = &uart1;
  43                 serial1 = &uart2;
  44                 serial2 = &uart3;
  45                 serial3 = &uart4;
  46                 serial4 = &uart5;
  47                 spi0 = &spi1;
  48                 spi1 = &spi2;
  49                 spi2 = &spi3;
  50                 usb0 = &usbotg;
  51                 usb1 = &usbhost1;
  52         };
  53
  54         cpus {
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57
  58                 cpu@0 {
  59                         compatible = "arm,arm926ej-s";
  60                         device_type = "cpu";
  61                         reg = <0>;
  62                 };
  63         };
  64
  65         asic: asic-interrupt-controller@68000000 {
  66                 compatible = "fsl,imx25-asic", "fsl,avic";
  67                 interrupt-controller;
  68                 #interrupt-cells = <1>;
  69                 reg = <0x68000000 0x8000000>;
  70         };
  71
  72         clocks {
  73                 #address-cells = <1>;
  74                 #size-cells = <0>;
  75
  76                 osc {
  77                         compatible = "fsl,imx-osc", "fixed-clock";
  78                         #clock-cells = <0>;
  79                         clock-frequency = <24000000>;
  80                 };
  81         };
  82
  83         soc {
  84                 #address-cells = <1>;
  85                 #size-cells = <1>;
  86                 compatible = "simple-bus";
  87                 interrupt-parent = <&asic>;
  88                 ranges;
  89
  90                 aips@43f00000 { /* AIPS1 */
  91                         compatible = "fsl,aips-bus", "simple-bus";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94                         reg = <0x43f00000 0x100000>;
  95                         ranges;
  96
  97                         aips1: bridge@43f00000 {
  98                                 compatible = "fsl,imx25-aips";
  99                                 reg = <0x43f00000 0x4000>;
 100                         };
 101
 102                         i2c1: i2c@43f80000 {
 103                                 #address-cells = <1>;
 104                                 #size-cells = <0>;
 105                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 106                                 reg = <0x43f80000 0x4000>;
 107                                 clocks = <&clks 48>;
 108                                 clock-names = "";
 109                                 interrupts = <3>;
 110                                 status = "disabled";
 111                         };
 112
 113                         i2c3: i2c@43f84000 {
 114                                 #address-cells = <1>;
 115                                 #size-cells = <0>;
 116                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 117                                 reg = <0x43f84000 0x4000>;
 118                                 clocks = <&clks 48>;
 119                                 clock-names = "";
 120                                 interrupts = <10>;
 121                                 status = "disabled";
 122                         };
 123
 124                         can1: can@43f88000 {
 125                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 126                                 reg = <0x43f88000 0x4000>;
 127                                 interrupts = <43>;
 128                                 clocks = <&clks 75>, <&clks 75>;
 129                                 clock-names = "ipg", "per";
 130                                 status = "disabled";
 131                         };
 132
 133                         can2: can@43f8c000 {
 134                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 135                                 reg = <0x43f8c000 0x4000>;
 136                                 interrupts = <44>;
 137                                 clocks = <&clks 76>, <&clks 76>;
 138                                 clock-names = "ipg", "per";
 139                                 status = "disabled";
 140                         };
 141
 142                         uart1: serial@43f90000 {
 143                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 144                                 reg = <0x43f90000 0x4000>;
 145                                 interrupts = <45>;
 146                                 clocks = <&clks 120>, <&clks 57>;
 147                                 clock-names = "ipg", "per";
 148                                 status = "disabled";
 149                         };
 150
 151                         uart2: serial@43f94000 {
 152                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 153                                 reg = <0x43f94000 0x4000>;
 154                                 interrupts = <32>;
 155                                 clocks = <&clks 121>, <&clks 57>;
 156                                 clock-names = "ipg", "per";
 157                                 status = "disabled";
 158                         };
 159
 160                         i2c2: i2c@43f98000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 164                                 reg = <0x43f98000 0x4000>;
 165                                 clocks = <&clks 48>;
 166                                 clock-names = "";
 167                                 interrupts = <4>;
 168                                 status = "disabled";
 169                         };
 170
 171                         owire@43f9c000 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 reg = <0x43f9c000 0x4000>;
 175                                 clocks = <&clks 51>;
 176                                 clock-names = "";
 177                                 interrupts = <2>;
 178                                 status = "disabled";
 179                         };
 180
 181                         spi1: cspi@43fa4000 {
 182                                 #address-cells = <1>;
 183                                 #size-cells = <0>;
 184                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 185                                 reg = <0x43fa4000 0x4000>;
 186                                 clocks = <&clks 78>, <&clks 78>;
 187                                 clock-names = "ipg", "per";
 188                                 interrupts = <14>;
 189                                 status = "disabled";
 190                         };
 191
 192                         kpp: kpp@43fa8000 {
 193                                 #address-cells = <1>;
 194                                 #size-cells = <0>;
 195                                 compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 196                                 reg = <0x43fa8000 0x4000>;
 197                                 clocks = <&clks 102>;
 198                                 clock-names = "";
 199                                 interrupts = <24>;
 200                                 status = "disabled";
 201                         };
 202
 203                         iomuxc: iomuxc@43fac000 {
 204                                 compatible = "fsl,imx25-iomuxc";
 205                                 reg = <0x43fac000 0x4000>;
 206                         };
 207
 208                         audmux: audmux@43fb0000 {
 209                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 210                                 reg = <0x43fb0000 0x4000>;
 211                                 status = "disabled";
 212                         };
 213                 };
 214
 215                 spba@50000000 {
 216                         compatible = "fsl,spba-bus", "simple-bus";
 217                         #address-cells = <1>;
 218                         #size-cells = <1>;
 219                         reg = <0x50000000 0x40000>;
 220                         ranges;
 221
 222                         spi3: cspi@50004000 {
 223                                 #address-cells = <1>;
 224                                 #size-cells = <0>;
 225                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 226                                 reg = <0x50004000 0x4000>;
 227                                 interrupts = <0>;
 228                                 clocks = <&clks 80>, <&clks 80>;
 229                                 clock-names = "ipg", "per";
 230                                 status = "disabled";
 231                         };
 232
 233                         uart4: serial@50008000 {
 234                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 235                                 reg = <0x50008000 0x4000>;
 236                                 interrupts = <5>;
 237                                 clocks = <&clks 123>, <&clks 57>;
 238                                 clock-names = "ipg", "per";
 239                                 status = "disabled";
 240                         };
 241
 242                         uart3: serial@5000c000 {
 243                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 244                                 reg = <0x5000c000 0x4000>;
 245                                 interrupts = <18>;
 246                                 clocks = <&clks 122>, <&clks 57>;
 247                                 clock-names = "ipg", "per";
 248                                 status = "disabled";
 249                         };
 250
 251                         spi2: cspi@50010000 {
 252                                 #address-cells = <1>;
 253                                 #size-cells = <0>;
 254                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 255                                 reg = <0x50010000 0x4000>;
 256                                 clocks = <&clks 79>, <&clks 79>;
 257                                 clock-names = "ipg", "per";
 258                                 interrupts = <13>;
 259                                 status = "disabled";
 260                         };
 261
 262                         ssi2: ssi@50014000 {
 263                                 #sound-dai-cells = <0>;
 264                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 265                                 reg = <0x50014000 0x4000>;
 266                                 interrupts = <11>;
 267                                 clocks = <&clks 118>;
 268                                 clock-names = "ipg";
 269                                 dmas = <&sdma 24 1 0>,
 270                                        <&sdma 25 1 0>;
 271                                 dma-names = "rx", "tx";
 272                                 status = "disabled";
 273                         };
 274
 275                         esai@50018000 {
 276                                 reg = <0x50018000 0x4000>;
 277                                 interrupts = <7>;
 278                         };
 279
 280                         uart5: serial@5002c000 {
 281                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 282                                 reg = <0x5002c000 0x4000>;
 283                                 interrupts = <40>;
 284                                 clocks = <&clks 124>, <&clks 57>;
 285                                 clock-names = "ipg", "per";
 286                                 status = "disabled";
 287                         };
 288
 289                         tscadc: tscadc@50030000 {
 290                                 compatible = "fsl,imx25-tsadc";
 291                                 reg = <0x50030000 0xc>;
 292                                 interrupts = <46>;
 293                                 clocks = <&clks 119>;
 294                                 clock-names = "ipg";
 295                                 interrupt-controller;
 296                                 #interrupt-cells = <1>;
 297                                 #address-cells = <1>;
 298                                 #size-cells = <1>;
 299                                 status = "disabled";
 300                                 ranges;
 301
 302                                 adc: adc@50030800 {
 303                                         compatible = "fsl,imx25-gcq";
 304                                         reg = <0x50030800 0x60>;
 305                                         interrupt-parent = <&tscadc>;
 306                                         interrupts = <1>;
 307                                         #address-cells = <1>;
 308                                         #size-cells = <0>;
 309                                         status = "disabled";
 310                                 };
 311
 312                                 tsc: tcq@50030400 {
 313                                         compatible = "fsl,imx25-tcq";
 314                                         reg = <0x50030400 0x60>;
 315                                         interrupt-parent = <&tscadc>;
 316                                         interrupts = <0>;
 317                                         fsl,wires = <4>;
 318                                         status = "disabled";
 319                                 };
 320                         };
 321
 322                         ssi1: ssi@50034000 {
 323                                 #sound-dai-cells = <0>;
 324                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 325                                 reg = <0x50034000 0x4000>;
 326                                 interrupts = <12>;
 327                                 clocks = <&clks 117>;
 328                                 clock-names = "ipg";
 329                                 dmas = <&sdma 28 1 0>,
 330                                        <&sdma 29 1 0>;
 331                                 dma-names = "rx", "tx";
 332                                 status = "disabled";
 333                         };
 334
 335                         fec: ethernet@50038000 {
 336                                 compatible = "fsl,imx25-fec";
 337                                 reg = <0x50038000 0x4000>;
 338                                 interrupts = <57>;
 339                                 clocks = <&clks 88>, <&clks 65>;
 340                                 clock-names = "ipg", "ahb";
 341                                 status = "disabled";
 342                         };
 343                 };
 344
 345                 aips@53f00000 { /* AIPS2 */
 346                         compatible = "fsl,aips-bus", "simple-bus";
 347                         #address-cells = <1>;
 348                         #size-cells = <1>;
 349                         reg = <0x53f00000 0x100000>;
 350                         ranges;
 351
 352                         aips2: bridge@53f00000 {
 353                                 compatible = "fsl,imx25-aips";
 354                                 reg = <0x53f00000 0x4000>;
 355                         };
 356
 357                         clks: ccm@53f80000 {
 358                                 compatible = "fsl,imx25-ccm";
 359                                 reg = <0x53f80000 0x4000>;
 360                                 interrupts = <31>;
 361                                 #clock-cells = <1>;
 362                         };
 363
 364                         gpt4: timer@53f84000 {
 365                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 366                                 reg = <0x53f84000 0x4000>;
 367                                 clocks = <&clks 95>, <&clks 47>;
 368                                 clock-names = "ipg", "per";
 369                                 interrupts = <1>;
 370                         };
 371
 372                         gpt3: timer@53f88000 {
 373                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 374                                 reg = <0x53f88000 0x4000>;
 375                                 clocks = <&clks 94>, <&clks 47>;
 376                                 clock-names = "ipg", "per";
 377                                 interrupts = <29>;
 378                         };
 379
 380                         gpt2: timer@53f8c000 {
 381                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 382                                 reg = <0x53f8c000 0x4000>;
 383                                 clocks = <&clks 93>, <&clks 47>;
 384                                 clock-names = "ipg", "per";
 385                                 interrupts = <53>;
 386                         };
 387
 388                         gpt1: timer@53f90000 {
 389                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 390                                 reg = <0x53f90000 0x4000>;
 391                                 clocks = <&clks 92>, <&clks 47>;
 392                                 clock-names = "ipg", "per";
 393                                 interrupts = <54>;
 394                         };
 395
 396                         epit1: timer@53f94000 {
 397                                 compatible = "fsl,imx25-epit";
 398                                 reg = <0x53f94000 0x4000>;
 399                                 interrupts = <28>;
 400                         };
 401
 402                         epit2: timer@53f98000 {
 403                                 compatible = "fsl,imx25-epit";
 404                                 reg = <0x53f98000 0x4000>;
 405                                 interrupts = <27>;
 406                         };
 407
 408                         gpio4: gpio@53f9c000 {
 409                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 410                                 reg = <0x53f9c000 0x4000>;
 411                                 interrupts = <23>;
 412                                 gpio-controller;
 413                                 #gpio-cells = <2>;
 414                                 interrupt-controller;
 415                                 #interrupt-cells = <2>;
 416                         };
 417
 418                         pwm2: pwm@53fa0000 {
 419                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 420                                 #pwm-cells = <2>;
 421                                 reg = <0x53fa0000 0x4000>;
 422                                 clocks = <&clks 106>, <&clks 52>;
 423                                 clock-names = "ipg", "per";
 424                                 interrupts = <36>;
 425                         };
 426
 427                         gpio3: gpio@53fa4000 {
 428                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 429                                 reg = <0x53fa4000 0x4000>;
 430                                 interrupts = <16>;
 431                                 gpio-controller;
 432                                 #gpio-cells = <2>;
 433                                 interrupt-controller;
 434                                 #interrupt-cells = <2>;
 435                         };
 436
 437                         pwm3: pwm@53fa8000 {
 438                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 439                                 #pwm-cells = <2>;
 440                                 reg = <0x53fa8000 0x4000>;
 441                                 clocks = <&clks 107>, <&clks 52>;
 442                                 clock-names = "ipg", "per";
 443                                 interrupts = <41>;
 444                         };
 445
 446                         scc: crypto@53fac000 {
 447                                 compatible = "fsl,imx25-scc";
 448                                 reg = <0x53fac000 0x4000>;
 449                                 clocks = <&clks 111>;
 450                                 clock-names = "ipg";
 451                                 interrupts = <49>, <50>;
 452                                 interrupt-names = "scm", "smn";
 453                         };
 454
 455                         esdhc1: esdhc@53fb4000 {
 456                                 compatible = "fsl,imx25-esdhc";
 457                                 reg = <0x53fb4000 0x4000>;
 458                                 interrupts = <9>;
 459                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 460                                 clock-names = "ipg", "ahb", "per";
 461                                 status = "disabled";
 462                         };
 463
 464                         esdhc2: esdhc@53fb8000 {
 465                                 compatible = "fsl,imx25-esdhc";
 466                                 reg = <0x53fb8000 0x4000>;
 467                                 interrupts = <8>;
 468                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 469                                 clock-names = "ipg", "ahb", "per";
 470                                 status = "disabled";
 471                         };
 472
 473                         lcdc: lcdc@53fbc000 {
 474                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 475                                 reg = <0x53fbc000 0x4000>;
 476                                 interrupts = <39>;
 477                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 478                                 clock-names = "ipg", "ahb", "per";
 479                                 status = "disabled";
 480                         };
 481
 482                         slcdc@53fc0000 {
 483                                 reg = <0x53fc0000 0x4000>;
 484                                 interrupts = <38>;
 485                                 status = "disabled";
 486                         };
 487
 488                         pwm4: pwm@53fc8000 {
 489                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 490                                 #pwm-cells = <2>;
 491                                 reg = <0x53fc8000 0x4000>;
 492                                 clocks = <&clks 108>, <&clks 52>;
 493                                 clock-names = "ipg", "per";
 494                                 interrupts = <42>;
 495                         };
 496
 497                         gpio1: gpio@53fcc000 {
 498                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 499                                 reg = <0x53fcc000 0x4000>;
 500                                 interrupts = <52>;
 501                                 gpio-controller;
 502                                 #gpio-cells = <2>;
 503                                 interrupt-controller;
 504                                 #interrupt-cells = <2>;
 505                         };
 506
 507                         gpio2: gpio@53fd0000 {
 508                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 509                                 reg = <0x53fd0000 0x4000>;
 510                                 interrupts = <51>;
 511                                 gpio-controller;
 512                                 #gpio-cells = <2>;
 513                                 interrupt-controller;
 514                                 #interrupt-cells = <2>;
 515                         };
 516
 517                         sdma: sdma@53fd4000 {
 518                                 compatible = "fsl,imx25-sdma";
 519                                 reg = <0x53fd4000 0x4000>;
 520                                 clocks = <&clks 112>, <&clks 68>;
 521                                 clock-names = "ipg", "ahb";
 522                                 #dma-cells = <3>;
 523                                 interrupts = <34>;
 524                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 525                         };
 526
 527                         wdog@53fdc000 {
 528                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 529                                 reg = <0x53fdc000 0x4000>;
 530                                 clocks = <&clks 126>;
 531                                 clock-names = "";
 532                                 interrupts = <55>;
 533                         };
 534
 535                         pwm1: pwm@53fe0000 {
 536                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 537                                 #pwm-cells = <2>;
 538                                 reg = <0x53fe0000 0x4000>;
 539                                 clocks = <&clks 105>, <&clks 52>;
 540                                 clock-names = "ipg", "per";
 541                                 interrupts = <26>;
 542                         };
 543
 544                         iim: iim@53ff0000 {
 545                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 546                                 reg = <0x53ff0000 0x4000>;
 547                                 interrupts = <19>;
 548                                 clocks = <&clks 99>;
 549                         };
 550
 551                         usbotg: usb@53ff4000 {
 552                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 553                                 reg = <0x53ff4000 0x0200>;
 554                                 interrupts = <37>;
 555                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 556                                 clock-names = "ipg", "ahb", "per";
 557                                 fsl,usbmisc = <&usbmisc 0>;
 558                                 fsl,usbphy = <&usbphy0>;
 559                                 phy_type = "utmi";
 560                                 dr_mode = "otg";
 561                                 status = "disabled";
 562                         };
 563
 564                         usbhost1: usb@53ff4400 {
 565                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 566                                 reg = <0x53ff4400 0x0200>;
 567                                 interrupts = <35>;
 568                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 569                                 clock-names = "ipg", "ahb", "per";
 570                                 fsl,usbmisc = <&usbmisc 1>;
 571                                 fsl,usbphy = <&usbphy1>;
 572                                 status = "disabled";
 573                         };
 574
 575                         usbmisc: usbmisc@53ff4600 {
 576                                 #index-cells = <1>;
 577                                 compatible = "fsl,imx25-usbmisc";
 578                                 reg = <0x53ff4600 0x00f>;
 579                         };
 580
 581                         dryice@53ffc000 {
 582                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 583                                 reg = <0x53ffc000 0x4000>;
 584                                 clocks = <&clks 81>;
 585                                 clock-names = "ipg";
 586                                 interrupts = <25 56>;
 587                         };
 588                 };
 589
 590                 iram: sram@78000000 {
 591                         compatible = "mmio-sram";
 592                         reg = <0x78000000 0x20000>;
 593                 };
 594
 595                 emi@80000000 {
 596                         compatible = "fsl,emi-bus", "simple-bus";
 597                         #address-cells = <1>;
 598                         #size-cells = <1>;
 599                         reg = <0x80000000 0x3b002000>;
 600                         ranges;
 601
 602                         nfc: nand@bb000000 {
 603                                 #address-cells = <1>;
 604                                 #size-cells = <1>;
 605
 606                                 compatible = "fsl,imx25-nand";
 607                                 reg = <0xbb000000 0x2000>;
 608                                 clocks = <&clks 50>;
 609                                 clock-names = "";
 610                                 interrupts = <33>;
 611                                 status = "disabled";
 612                         };
 613                 };
 614         };
 615
 616         usbphy {
 617                 compatible = "simple-bus";
 618                 #address-cells = <1>;
 619                 #size-cells = <0>;
 620
 621                 usbphy0: usb-phy@0 {
 622                         reg = <0>;
 623                         compatible = "usb-nop-xceiv";
 624                 };
 625
 626                 usbphy1: usb-phy@1 {
 627                         reg = <1>;
 628                         compatible = "usb-nop-xceiv";
 629                 };
 630         };
 631 };