treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright 2013 EukrĂ©a Electromatique <denis@eukrea.com>
4  */
5
6 #include "imx25-eukrea-mbimxsd25-baseboard.dts"
7
8 / {
9         model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
10         compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
11
12         cmo_qvga: display {
13                 model = "CMO-QVGA";
14                 bits-per-pixel = <16>;
15                 fsl,pcr = <0xcad08b80>;
16                 bus-width = <18>;
17                 native-mode = <&qvga_timings>;
18                 display-timings {
19                         qvga_timings: 320x240 {
20                                 clock-frequency = <6500000>;
21                                 hactive = <320>;
22                                 vactive = <240>;
23                                 hback-porch = <30>;
24                                 hfront-porch = <38>;
25                                 vback-porch = <20>;
26                                 vfront-porch = <3>;
27                                 hsync-len = <15>;
28                                 vsync-len = <4>;
29                         };
30                 };
31         };
32
33         regulators {
34                 compatible = "simple-bus";
35                 #address-cells = <1>;
36                 #size-cells = <0>;
37
38                 reg_lcd_3v3: regulator@0 {
39                         compatible = "regulator-fixed";
40                         reg = <0>;
41                         pinctrl-names = "default";
42                         pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
43                         regulator-name = "lcd-3v3";
44                         regulator-min-microvolt = <3300000>;
45                         regulator-max-microvolt = <3300000>;
46                         gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
47                         enable-active-high;
48                 };
49         };
50 };
51
52 &iomuxc {
53         imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
54                 pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
55                         fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
56                 };
57         };
58 };
59
60 &lcdc {
61         display = <&cmo_qvga>;
62         fsl,lpccr = <0x00a903ff>;
63         lcd-supply = <&reg_lcd_3v3>;
64         status = "okay";
65 };