Merge tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kerne...
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / exynos5250-arndale.dts
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Samsung's Exynos5250 based Arndale board device tree source
4  *
5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6  *              http://www.samsung.com
7  */
8
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/input/input.h>
13 #include "exynos5250.dtsi"
14
15 / {
16         model = "Insignal Arndale evaluation board based on EXYNOS5250";
17         compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
18
19         memory@40000000 {
20                 device_type = "memory";
21                 reg = <0x40000000 0x80000000>;
22         };
23
24         chosen {
25                 bootargs = "console=ttySAC2,115200";
26         };
27
28         gpio_keys {
29                 compatible = "gpio-keys";
30
31                 menu {
32                         label = "SW-TACT2";
33                         gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
34                         linux,code = <KEY_MENU>;
35                         wakeup-source;
36                 };
37
38                 home {
39                         label = "SW-TACT3";
40                         gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
41                         linux,code = <KEY_HOME>;
42                         wakeup-source;
43                 };
44
45                 up {
46                         label = "SW-TACT4";
47                         gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
48                         linux,code = <KEY_UP>;
49                         wakeup-source;
50                 };
51
52                 down {
53                         label = "SW-TACT5";
54                         gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
55                         linux,code = <KEY_DOWN>;
56                         wakeup-source;
57                 };
58
59                 back {
60                         label = "SW-TACT6";
61                         gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
62                         linux,code = <KEY_BACK>;
63                         wakeup-source;
64                 };
65
66                 wakeup {
67                         label = "SW-TACT7";
68                         gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
69                         linux,code = <KEY_WAKEUP>;
70                         wakeup-source;
71                 };
72         };
73
74         panel: panel {
75                 compatible = "boe,hv070wsa-100";
76                 power-supply = <&vcc_3v3_reg>;
77                 enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
78                 port {
79                         panel_ep: endpoint {
80                                 remote-endpoint = <&bridge_out_ep>;
81                         };
82                 };
83         };
84
85         regulators {
86                 compatible = "simple-bus";
87                 #address-cells = <1>;
88                 #size-cells = <0>;
89
90                 main_dc_reg: regulator@0 {
91                         compatible = "regulator-fixed";
92                         reg = <0>;
93                         regulator-name = "MAIN_DC";
94                 };
95
96                 mmc_reg: regulator@1 {
97                         compatible = "regulator-fixed";
98                         reg = <1>;
99                         regulator-name = "VDD_33ON_2.8V";
100                         regulator-min-microvolt = <2800000>;
101                         regulator-max-microvolt = <2800000>;
102                         gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
103                         enable-active-high;
104                 };
105
106                 reg_hdmi_en: regulator@2 {
107                         compatible = "regulator-fixed";
108                         reg = <2>;
109                         regulator-name = "hdmi-en";
110                 };
111
112                 vcc_1v2_reg: regulator@3 {
113                         compatible = "regulator-fixed";
114                         reg = <3>;
115                         regulator-name = "VCC_1V2";
116                         regulator-min-microvolt = <1200000>;
117                         regulator-max-microvolt = <1200000>;
118                 };
119
120                 vcc_1v8_reg: regulator@4 {
121                         compatible = "regulator-fixed";
122                         reg = <4>;
123                         regulator-name = "VCC_1V8";
124                         regulator-min-microvolt = <1800000>;
125                         regulator-max-microvolt = <1800000>;
126                 };
127
128                 vcc_3v3_reg: regulator@5 {
129                         compatible = "regulator-fixed";
130                         reg = <5>;
131                         regulator-name = "VCC_3V3";
132                         regulator-min-microvolt = <3300000>;
133                         regulator-max-microvolt = <3300000>;
134                 };
135         };
136
137         fixed-rate-clocks {
138                 xxti {
139                         compatible = "samsung,clock-xxti";
140                         clock-frequency = <24000000>;
141                 };
142         };
143
144         // SMSC USB3503 connected in hardware only mode as a PHY
145         usb_hub: usb-hub {
146                 compatible = "smsc,usb3503a";
147
148                 reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
149                 connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
150         };
151 };
152
153 &cpu0 {
154         cpu0-supply = <&buck2_reg>;
155 };
156
157 &dsi_0 {
158         vddcore-supply = <&ldo8_reg>;
159         vddio-supply = <&ldo10_reg>;
160         samsung,pll-clock-frequency = <24000000>;
161         samsung,burst-clock-frequency = <320000000>;
162         samsung,esc-clock-frequency = <10000000>;
163         status = "okay";
164
165         bridge@0 {
166                 reg = <0>;
167                 compatible = "toshiba,tc358764";
168                 vddc-supply = <&vcc_1v2_reg>;
169                 vddio-supply = <&vcc_1v8_reg>;
170                 vddlvds-supply = <&vcc_3v3_reg>;
171                 reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
172                 #address-cells = <1>;
173                 #size-cells = <0>;
174                 port@1 {
175                         reg = <1>;
176                         bridge_out_ep: endpoint {
177                                 remote-endpoint = <&panel_ep>;
178                         };
179                 };
180         };
181 };
182
183 &dp {
184         status = "okay";
185         samsung,color-space = <0>;
186         samsung,color-depth = <1>;
187         samsung,link-rate = <0x0a>;
188         samsung,lane-count = <4>;
189
190         display-timings {
191                 native-mode = <&timing0>;
192
193                 timing0: timing {
194                         /* 2560x1600 DP panel */
195                         clock-frequency = <50000>;
196                         hactive = <2560>;
197                         vactive = <1600>;
198                         hfront-porch = <48>;
199                         hback-porch = <80>;
200                         hsync-len = <32>;
201                         vback-porch = <16>;
202                         vfront-porch = <8>;
203                         vsync-len = <6>;
204                 };
205         };
206 };
207
208 &fimd {
209         status = "okay";
210 };
211
212 &hdmi {
213         pinctrl-names = "default";
214         pinctrl-0 = <&hdmi_hpd>;
215         status = "okay";
216         ddc = <&i2c_ddc>;
217         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
218         vdd_osc-supply = <&ldo10_reg>;
219         vdd_pll-supply = <&ldo8_reg>;
220         vdd-supply = <&ldo8_reg>;
221 };
222
223 &i2c_0 {
224         status = "okay";
225         samsung,i2c-sda-delay = <100>;
226         samsung,i2c-max-bus-freq = <20000>;
227         samsung,i2c-slave-addr = <0x66>;
228
229         s5m8767_pmic@66 {
230                 compatible = "samsung,s5m8767-pmic";
231                 reg = <0x66>;
232                 interrupt-parent = <&gpx3>;
233                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
234                 pinctrl-names = "default";
235                 pinctrl-0 = <&s5m8767_irq>;
236
237                 vinb1-supply = <&main_dc_reg>;
238                 vinb2-supply = <&main_dc_reg>;
239                 vinb3-supply = <&main_dc_reg>;
240                 vinb4-supply = <&main_dc_reg>;
241                 vinb5-supply = <&main_dc_reg>;
242                 vinb6-supply = <&main_dc_reg>;
243                 vinb7-supply = <&main_dc_reg>;
244                 vinb8-supply = <&main_dc_reg>;
245                 vinb9-supply = <&main_dc_reg>;
246
247                 vinl1-supply = <&buck7_reg>;
248                 vinl2-supply = <&buck7_reg>;
249                 vinl3-supply = <&buck7_reg>;
250                 vinl4-supply = <&main_dc_reg>;
251                 vinl5-supply = <&main_dc_reg>;
252                 vinl6-supply = <&main_dc_reg>;
253                 vinl7-supply = <&main_dc_reg>;
254                 vinl8-supply = <&buck8_reg>;
255                 vinl9-supply = <&buck8_reg>;
256
257                 s5m8767,pmic-buck2-dvs-voltage = <1300000>;
258                 s5m8767,pmic-buck3-dvs-voltage = <1100000>;
259                 s5m8767,pmic-buck4-dvs-voltage = <1200000>;
260                 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
261                                               <&gpd1 1 GPIO_ACTIVE_HIGH>,
262                                               <&gpd1 2 GPIO_ACTIVE_HIGH>;
263                 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
264                                              <&gpx2 4 GPIO_ACTIVE_HIGH>,
265                                              <&gpx2 5 GPIO_ACTIVE_HIGH>;
266
267                 regulators {
268                         ldo1_reg: LDO1 {
269                                 regulator-name = "VDD_ALIVE_1.0V";
270                                 regulator-min-microvolt = <1100000>;
271                                 regulator-max-microvolt = <1100000>;
272                                 regulator-always-on;
273                                 regulator-boot-on;
274                                 op_mode = <1>;
275                         };
276
277                         ldo2_reg: LDO2 {
278                                 regulator-name = "VDD_28IO_DP_1.35V";
279                                 regulator-min-microvolt = <1200000>;
280                                 regulator-max-microvolt = <1200000>;
281                                 regulator-always-on;
282                                 regulator-boot-on;
283                                 op_mode = <1>;
284                         };
285
286                         ldo3_reg: LDO3 {
287                                 regulator-name = "VDD_COMMON1_1.8V";
288                                 regulator-min-microvolt = <1800000>;
289                                 regulator-max-microvolt = <1800000>;
290                                 regulator-always-on;
291                                 regulator-boot-on;
292                                 op_mode = <1>;
293                         };
294
295                         ldo4_reg: LDO4 {
296                                 regulator-name = "VDD_IOPERI_1.8V";
297                                 regulator-min-microvolt = <1800000>;
298                                 regulator-max-microvolt = <1800000>;
299                                 regulator-always-on;
300                                 op_mode = <1>;
301                         };
302
303                         ldo5_reg: LDO5 {
304                                 regulator-name = "VDD_EXT_1.8V";
305                                 regulator-min-microvolt = <1800000>;
306                                 regulator-max-microvolt = <1800000>;
307                                 regulator-always-on;
308                                 regulator-boot-on;
309                                 op_mode = <1>;
310                         };
311
312                         ldo6_reg: LDO6 {
313                                 regulator-name = "VDD_MPLL_1.1V";
314                                 regulator-min-microvolt = <1100000>;
315                                 regulator-max-microvolt = <1100000>;
316                                 regulator-always-on;
317                                 regulator-boot-on;
318                                 op_mode = <1>;
319                         };
320
321                         ldo7_reg: LDO7 {
322                                 regulator-name = "VDD_XPLL_1.1V";
323                                 regulator-min-microvolt = <1100000>;
324                                 regulator-max-microvolt = <1100000>;
325                                 regulator-always-on;
326                                 regulator-boot-on;
327                                 op_mode = <1>;
328                         };
329
330                         ldo8_reg: LDO8 {
331                                 regulator-name = "VDD_COMMON2_1.0V";
332                                 regulator-min-microvolt = <1000000>;
333                                 regulator-max-microvolt = <1000000>;
334                                 regulator-always-on;
335                                 regulator-boot-on;
336                                 op_mode = <1>;
337                         };
338
339                         ldo9_reg: LDO9 {
340                                 regulator-name = "VDD_33ON_3.0V";
341                                 regulator-min-microvolt = <3000000>;
342                                 regulator-max-microvolt = <3000000>;
343                                 op_mode = <1>;
344                         };
345
346                         ldo10_reg: LDO10 {
347                                 regulator-name = "VDD_COMMON3_1.8V";
348                                 regulator-min-microvolt = <1800000>;
349                                 regulator-max-microvolt = <1800000>;
350                                 regulator-always-on;
351                                 regulator-boot-on;
352                                 op_mode = <1>;
353                         };
354
355                         ldo11_reg: LDO11 {
356                                 regulator-name = "VDD_ABB2_1.8V";
357                                 regulator-min-microvolt = <1800000>;
358                                 regulator-max-microvolt = <1800000>;
359                                 regulator-always-on;
360                                 regulator-boot-on;
361                                 op_mode = <1>;
362                         };
363
364                         ldo12_reg: LDO12 {
365                                 regulator-name = "VDD_USB_3.0V";
366                                 regulator-min-microvolt = <3000000>;
367                                 regulator-max-microvolt = <3000000>;
368                                 regulator-always-on;
369                                 regulator-boot-on;
370                                 op_mode = <1>;
371                         };
372
373                         ldo13_reg: LDO13 {
374                                 regulator-name = "VDDQ_C2C_W_1.8V";
375                                 regulator-min-microvolt = <1800000>;
376                                 regulator-max-microvolt = <1800000>;
377                                 regulator-always-on;
378                                 regulator-boot-on;
379                                 op_mode = <1>;
380                         };
381
382                         ldo14_reg: LDO14 {
383                                 regulator-name = "VDD18_ABB0_3_1.8V";
384                                 regulator-min-microvolt = <1800000>;
385                                 regulator-max-microvolt = <1800000>;
386                                 regulator-always-on;
387                                 regulator-boot-on;
388                                 op_mode = <1>;
389                         };
390
391                         ldo15_reg: LDO15 {
392                                 regulator-name = "VDD10_COMMON4_1.0V";
393                                 regulator-min-microvolt = <1000000>;
394                                 regulator-max-microvolt = <1000000>;
395                                 regulator-always-on;
396                                 regulator-boot-on;
397                                 op_mode = <1>;
398                         };
399
400                         ldo16_reg: LDO16 {
401                                 regulator-name = "VDD18_HSIC_1.8V";
402                                 regulator-min-microvolt = <1800000>;
403                                 regulator-max-microvolt = <1800000>;
404                                 regulator-always-on;
405                                 regulator-boot-on;
406                                 op_mode = <1>;
407                         };
408
409                         ldo17_reg: LDO17 {
410                                 regulator-name = "VDDQ_MMC2_3_2.8V";
411                                 regulator-min-microvolt = <2800000>;
412                                 regulator-max-microvolt = <2800000>;
413                                 regulator-always-on;
414                                 regulator-boot-on;
415                                 op_mode = <1>;
416                         };
417
418                         ldo18_reg: LDO18 {
419                                 regulator-name = "VDD_33ON_2.8V";
420                                 regulator-min-microvolt = <2800000>;
421                                 regulator-max-microvolt = <2800000>;
422                                 op_mode = <1>;
423                         };
424
425                         ldo22_reg: LDO22 {
426                                 regulator-name = "EXT_33_OFF";
427                                 regulator-min-microvolt = <3300000>;
428                                 regulator-max-microvolt = <3300000>;
429                                 op_mode = <1>;
430                         };
431
432                         ldo23_reg: LDO23 {
433                                 regulator-name = "EXT_28_OFF";
434                                 regulator-min-microvolt = <2800000>;
435                                 regulator-max-microvolt = <2800000>;
436                                 op_mode = <1>;
437                         };
438
439                         ldo25_reg: LDO25 {
440                                 regulator-name = "PVDD_LDO25";
441                                 regulator-min-microvolt = <1200000>;
442                                 regulator-max-microvolt = <1200000>;
443                                 op_mode = <1>;
444                         };
445
446                         ldo26_reg: LDO26 {
447                                 regulator-name = "EXT_18_OFF";
448                                 regulator-min-microvolt = <1800000>;
449                                 regulator-max-microvolt = <1800000>;
450                                 op_mode = <1>;
451                         };
452
453                         buck1_reg: BUCK1 {
454                                 regulator-name = "vdd_mif";
455                                 regulator-min-microvolt = <950000>;
456                                 regulator-max-microvolt = <1200000>;
457                                 regulator-always-on;
458                                 regulator-boot-on;
459                                 op_mode = <1>;
460                         };
461
462                         buck2_reg: BUCK2 {
463                                 regulator-name = "vdd_arm";
464                                 regulator-min-microvolt = <912500>;
465                                 regulator-max-microvolt = <1300000>;
466                                 regulator-always-on;
467                                 regulator-boot-on;
468                                 op_mode = <1>;
469                         };
470
471                         buck3_reg: BUCK3 {
472                                 regulator-name = "vdd_int";
473                                 regulator-min-microvolt = <900000>;
474                                 regulator-max-microvolt = <1200000>;
475                                 regulator-always-on;
476                                 regulator-boot-on;
477                                 op_mode = <1>;
478                         };
479
480                         buck4_reg: BUCK4 {
481                                 regulator-name = "vdd_g3d";
482                                 regulator-min-microvolt = <1000000>;
483                                 regulator-max-microvolt = <1000000>;
484                                 regulator-always-on;
485                                 regulator-boot-on;
486                                 op_mode = <1>;
487                         };
488
489                         buck5_reg: BUCK5 {
490                                 regulator-name = "VDD_MEM_1.35V";
491                                 regulator-min-microvolt = <750000>;
492                                 regulator-max-microvolt = <1355000>;
493                                 regulator-always-on;
494                                 regulator-boot-on;
495                                 op_mode = <1>;
496                         };
497
498                         buck7_reg: BUCK7 {
499                                 regulator-name = "PVDD_BUCK7";
500                                 regulator-always-on;
501                                 op_mode = <1>;
502                         };
503
504                         buck8_reg: BUCK8 {
505                                 regulator-name = "PVDD_BUCK8";
506                                 regulator-always-on;
507                                 op_mode = <1>;
508                         };
509
510                         buck9_reg: BUCK9 {
511                                 regulator-name = "VDD_33_OFF_EXT1";
512                                 regulator-min-microvolt = <750000>;
513                                 regulator-max-microvolt = <3000000>;
514                                 op_mode = <1>;
515                         };
516                 };
517         };
518 };
519
520 &i2c_3 {
521         status = "okay";
522
523         wm1811a@1a {
524                 compatible = "wlf,wm1811";
525                 reg = <0x1a>;
526
527                 AVDD2-supply = <&main_dc_reg>;
528                 CPVDD-supply = <&main_dc_reg>;
529                 DBVDD1-supply = <&main_dc_reg>;
530                 DBVDD2-supply = <&main_dc_reg>;
531                 DBVDD3-supply = <&main_dc_reg>;
532                 LDO1VDD-supply = <&main_dc_reg>;
533                 SPKVDD1-supply = <&main_dc_reg>;
534                 SPKVDD2-supply = <&main_dc_reg>;
535
536                 wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
537                 wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
538         };
539 };
540
541 &i2c_8 {
542         status = "okay";
543         /* used by HDMI PHY */
544         samsung,i2c-sda-delay = <100>;
545         samsung,i2c-max-bus-freq = <66000>;
546 };
547
548 &i2c_9 {
549         status = "okay";
550         samsung,i2c-sda-delay = <100>;
551         samsung,i2c-max-bus-freq = <40000>;
552         samsung,i2c-slave-addr = <0x38>;
553
554         sata_phy_i2c:sata-phy@38 {
555                 compatible = "samsung,exynos-sataphy-i2c";
556                 reg = <0x38>;
557         };
558 };
559
560 &i2s0 {
561         status = "okay";
562 };
563
564 &mixer {
565         status = "okay";
566 };
567
568 &mmc_0 {
569         status = "okay";
570         broken-cd;
571         card-detect-delay = <200>;
572         samsung,dw-mshc-ciu-div = <3>;
573         samsung,dw-mshc-sdr-timing = <2 3>;
574         samsung,dw-mshc-ddr-timing = <1 2>;
575         vmmc-supply = <&mmc_reg>;
576         pinctrl-names = "default";
577         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
578         bus-width = <8>;
579         cap-mmc-highspeed;
580 };
581
582 &mmc_2 {
583         status = "okay";
584         card-detect-delay = <200>;
585         samsung,dw-mshc-ciu-div = <3>;
586         samsung,dw-mshc-sdr-timing = <2 3>;
587         samsung,dw-mshc-ddr-timing = <1 2>;
588         vmmc-supply = <&mmc_reg>;
589         pinctrl-names = "default";
590         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
591         bus-width = <4>;
592         disable-wp;
593         cap-sd-highspeed;
594 };
595
596 &pinctrl_0 {
597         s5m8767_irq: s5m8767-irq {
598                 samsung,pins = "gpx3-2";
599                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
600         };
601 };
602
603 &rtc {
604         status = "okay";
605 };
606
607 &sata {
608         status = "okay";
609 };
610
611 &sata_phy {
612         status = "okay";
613         samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
614 };
615
616 &soc {
617         /*
618          * For unknown reasons HDMI-DDC does not work with Exynos I2C
619          * controllers. Lets use software I2C over GPIO pins as a workaround.
620          */
621         i2c_ddc: i2c-gpio {
622                 pinctrl-names = "default";
623                 pinctrl-0 = <&i2c2_gpio_bus>;
624                 status = "okay";
625                 compatible = "i2c-gpio";
626                 gpios = <&gpa0 6 0 /* sda */
627                          &gpa0 7 0 /* scl */
628                         >;
629                 i2c-gpio,delay-us = <2>;
630                 #address-cells = <1>;
631                 #size-cells = <0>;
632         };
633 };