arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include <dt-bindings/gpio/gpio.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         model = "Samsung Trats 2 based on Exynos4412";
  22         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  23
  24         aliases {
  25                 i2c9 = &i2c_ak8975;
  26                 i2c10 = &i2c_cm36651;
  27                 i2c11 = &i2c_max77693;
  28                 i2c12 = &i2c_max77693_fuel;
  29         };
  30
  31         memory {
  32                 reg =  <0x40000000 0x40000000>;
  33         };
  34
  35         chosen {
  36                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  37                 stdout-path = &serial_2;
  38         };
  39
  40         firmware@0204F000 {
  41                 compatible = "samsung,secure-firmware";
  42                 reg = <0x0204F000 0x1000>;
  43         };
  44
  45         fixed-rate-clocks {
  46                 xxti {
  47                         compatible = "samsung,clock-xxti", "fixed-clock";
  48                         clock-frequency = <0>;
  49                 };
  50
  51                 xusbxti {
  52                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  53                         clock-frequency = <24000000>;
  54                 };
  55         };
  56
  57         regulators {
  58                 compatible = "simple-bus";
  59                 #address-cells = <1>;
  60                 #size-cells = <0>;
  61
  62                 cam_io_reg: voltage-regulator-1 {
  63                         compatible = "regulator-fixed";
  64                         regulator-name = "CAM_SENSOR_A";
  65                         regulator-min-microvolt = <2800000>;
  66                         regulator-max-microvolt = <2800000>;
  67                         gpio = <&gpm0 2 0>;
  68                         enable-active-high;
  69                 };
  70
  71                 lcd_vdd3_reg: voltage-regulator-2 {
  72                         compatible = "regulator-fixed";
  73                         regulator-name = "LCD_VDD_2.2V";
  74                         regulator-min-microvolt = <2200000>;
  75                         regulator-max-microvolt = <2200000>;
  76                         gpio = <&gpc0 1 0>;
  77                         enable-active-high;
  78                 };
  79
  80                 cam_af_reg: voltage-regulator-3 {
  81                         compatible = "regulator-fixed";
  82                         regulator-name = "CAM_AF";
  83                         regulator-min-microvolt = <2800000>;
  84                         regulator-max-microvolt = <2800000>;
  85                         gpio = <&gpm0 4 0>;
  86                         enable-active-high;
  87                 };
  88
  89                 ps_als_reg: voltage-regulator-5 {
  90                         compatible = "regulator-fixed";
  91                         regulator-name = "LED_A_3.0V";
  92                         regulator-min-microvolt = <3000000>;
  93                         regulator-max-microvolt = <3000000>;
  94                         gpio = <&gpj0 5 0>;
  95                         enable-active-high;
  96                 };
  97         };
  98
  99         gpio-keys {
 100                 compatible = "gpio-keys";
 101
 102                 key-down {
 103                         gpios = <&gpx3 3 1>;
 104                         linux,code = <114>;
 105                         label = "volume down";
 106                         debounce-interval = <10>;
 107                 };
 108
 109                 key-up {
 110                         gpios = <&gpx2 2 1>;
 111                         linux,code = <115>;
 112                         label = "volume up";
 113                         debounce-interval = <10>;
 114                 };
 115
 116                 key-power {
 117                         gpios = <&gpx2 7 1>;
 118                         linux,code = <116>;
 119                         label = "power";
 120                         debounce-interval = <10>;
 121                         gpio-key,wakeup;
 122                 };
 123
 124                 key-ok {
 125                         gpios = <&gpx0 1 1>;
 126                         linux,code = <139>;
 127                         label = "ok";
 128                         debounce-inteval = <10>;
 129                         gpio-key,wakeup;
 130                 };
 131         };
 132
 133         adc: adc@126C0000 {
 134                 vdd-supply = <&ldo3_reg>;
 135                 status = "okay";
 136         };
 137
 138         i2c@13890000 {
 139                 samsung,i2c-sda-delay = <100>;
 140                 samsung,i2c-slave-addr = <0x10>;
 141                 samsung,i2c-max-bus-freq = <400000>;
 142                 pinctrl-0 = <&i2c3_bus>;
 143                 pinctrl-names = "default";
 144                 status = "okay";
 145
 146                 mms114-touchscreen@48 {
 147                         compatible = "melfas,mms114";
 148                         reg = <0x48>;
 149                         interrupt-parent = <&gpm2>;
 150                         interrupts = <3 2>;
 151                         x-size = <720>;
 152                         y-size = <1280>;
 153                         avdd-supply = <&ldo23_reg>;
 154                         vdd-supply = <&ldo24_reg>;
 155                 };
 156         };
 157
 158         i2c_0: i2c@13860000 {
 159                 samsung,i2c-sda-delay = <100>;
 160                 samsung,i2c-slave-addr = <0x10>;
 161                 samsung,i2c-max-bus-freq = <400000>;
 162                 pinctrl-0 = <&i2c0_bus>;
 163                 pinctrl-names = "default";
 164                 status = "okay";
 165
 166                 s5c73m3@3c {
 167                         compatible = "samsung,s5c73m3";
 168                         reg = <0x3c>;
 169                         standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
 170                         xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
 171                         vdd-int-supply = <&buck9_reg>;
 172                         vddio-cis-supply = <&ldo9_reg>;
 173                         vdda-supply = <&ldo17_reg>;
 174                         vddio-host-supply = <&ldo18_reg>;
 175                         vdd-af-supply = <&cam_af_reg>;
 176                         vdd-reg-supply = <&cam_io_reg>;
 177                         clock-frequency = <24000000>;
 178                         /* CAM_A_CLKOUT */
 179                         clocks = <&camera 0>;
 180                         clock-names = "cis_extclk";
 181                         port {
 182                                 s5c73m3_ep: endpoint {
 183                                         remote-endpoint = <&csis0_ep>;
 184                                         data-lanes = <1 2 3 4>;
 185                                 };
 186                         };
 187                 };
 188         };
 189
 190         i2c@138A0000 {
 191                 samsung,i2c-sda-delay = <100>;
 192                 samsung,i2c-slave-addr = <0x10>;
 193                 samsung,i2c-max-bus-freq = <100000>;
 194                 pinctrl-0 = <&i2c4_bus>;
 195                 pinctrl-names = "default";
 196                 status = "okay";
 197
 198                 wm1811: wm1811@1a {
 199                         compatible = "wlf,wm1811";
 200                         reg = <0x1a>;
 201                         clocks = <&pmu_system_controller 0>;
 202                         clock-names = "MCLK1";
 203                         DCVDD-supply = <&ldo3_reg>;
 204                         DBVDD1-supply = <&ldo3_reg>;
 205                         wlf,ldo1ena = <&gpj0 4 0>;
 206                 };
 207         };
 208
 209         i2c@138D0000 {
 210                 samsung,i2c-sda-delay = <100>;
 211                 samsung,i2c-slave-addr = <0x10>;
 212                 samsung,i2c-max-bus-freq = <100000>;
 213                 pinctrl-0 = <&i2c7_bus>;
 214                 pinctrl-names = "default";
 215                 status = "okay";
 216
 217                 max77686_pmic@09 {
 218                         compatible = "maxim,max77686";
 219                         interrupt-parent = <&gpx0>;
 220                         interrupts = <7 0>;
 221                         reg = <0x09>;
 222                         #clock-cells = <1>;
 223
 224                         voltage-regulators {
 225                                 ldo1_reg: ldo1 {
 226                                         regulator-compatible = "LDO1";
 227                                         regulator-name = "VALIVE_1.0V_AP";
 228                                         regulator-min-microvolt = <1000000>;
 229                                         regulator-max-microvolt = <1000000>;
 230                                         regulator-always-on;
 231                                 };
 232
 233                                 ldo2_reg: ldo2 {
 234                                         regulator-compatible = "LDO2";
 235                                         regulator-name = "VM1M2_1.2V_AP";
 236                                         regulator-min-microvolt = <1200000>;
 237                                         regulator-max-microvolt = <1200000>;
 238                                         regulator-always-on;
 239                                         regulator-state-mem {
 240                                                 regulator-on-in-suspend;
 241                                         };
 242                                 };
 243
 244                                 ldo3_reg: ldo3 {
 245                                         regulator-compatible = "LDO3";
 246                                         regulator-name = "VCC_1.8V_AP";
 247                                         regulator-min-microvolt = <1800000>;
 248                                         regulator-max-microvolt = <1800000>;
 249                                         regulator-always-on;
 250                                 };
 251
 252                                 ldo4_reg: ldo4 {
 253                                         regulator-compatible = "LDO4";
 254                                         regulator-name = "VCC_2.8V_AP";
 255                                         regulator-min-microvolt = <2800000>;
 256                                         regulator-max-microvolt = <2800000>;
 257                                         regulator-always-on;
 258                                 };
 259
 260                                 ldo5_reg: ldo5 {
 261                                         regulator-compatible = "LDO5";
 262                                         regulator-name = "VCC_1.8V_IO";
 263                                         regulator-min-microvolt = <1800000>;
 264                                         regulator-max-microvolt = <1800000>;
 265                                         regulator-always-on;
 266                                 };
 267
 268                                 ldo6_reg: ldo6 {
 269                                         regulator-compatible = "LDO6";
 270                                         regulator-name = "VMPLL_1.0V_AP";
 271                                         regulator-min-microvolt = <1000000>;
 272                                         regulator-max-microvolt = <1000000>;
 273                                         regulator-always-on;
 274                                         regulator-state-mem {
 275                                                 regulator-on-in-suspend;
 276                                         };
 277                                 };
 278
 279                                 ldo7_reg: ldo7 {
 280                                         regulator-compatible = "LDO7";
 281                                         regulator-name = "VPLL_1.0V_AP";
 282                                         regulator-min-microvolt = <1000000>;
 283                                         regulator-max-microvolt = <1000000>;
 284                                         regulator-always-on;
 285                                         regulator-state-mem {
 286                                                 regulator-on-in-suspend;
 287                                         };
 288                                 };
 289
 290                                 ldo8_reg: ldo8 {
 291                                         regulator-compatible = "LDO8";
 292                                         regulator-name = "VMIPI_1.0V";
 293                                         regulator-min-microvolt = <1000000>;
 294                                         regulator-max-microvolt = <1000000>;
 295                                         regulator-state-mem {
 296                                                 regulator-off-in-suspend;
 297                                         };
 298                                 };
 299
 300                                 ldo9_reg: ldo9 {
 301                                         regulator-compatible = "LDO9";
 302                                         regulator-name = "CAM_ISP_MIPI_1.2V";
 303                                         regulator-min-microvolt = <1200000>;
 304                                         regulator-max-microvolt = <1200000>;
 305                                 };
 306
 307                                 ldo10_reg: ldo10 {
 308                                         regulator-compatible = "LDO10";
 309                                         regulator-name = "VMIPI_1.8V";
 310                                         regulator-min-microvolt = <1800000>;
 311                                         regulator-max-microvolt = <1800000>;
 312                                         regulator-state-mem {
 313                                                 regulator-off-in-suspend;
 314                                         };
 315                                 };
 316
 317                                 ldo11_reg: ldo11 {
 318                                         regulator-compatible = "LDO11";
 319                                         regulator-name = "VABB1_1.95V";
 320                                         regulator-min-microvolt = <1950000>;
 321                                         regulator-max-microvolt = <1950000>;
 322                                         regulator-always-on;
 323                                         regulator-state-mem {
 324                                                 regulator-off-in-suspend;
 325                                         };
 326                                 };
 327
 328                                 ldo12_reg: ldo12 {
 329                                         regulator-compatible = "LDO12";
 330                                         regulator-name = "VUOTG_3.0V";
 331                                         regulator-min-microvolt = <3000000>;
 332                                         regulator-max-microvolt = <3000000>;
 333                                         regulator-state-mem {
 334                                                 regulator-off-in-suspend;
 335                                         };
 336                                 };
 337
 338                                 ldo13_reg: ldo13 {
 339                                         regulator-compatible = "LDO13";
 340                                         regulator-name = "NFC_AVDD_1.8V";
 341                                         regulator-min-microvolt = <1800000>;
 342                                         regulator-max-microvolt = <1800000>;
 343                                 };
 344
 345                                 ldo14_reg: ldo14 {
 346                                         regulator-compatible = "LDO14";
 347                                         regulator-name = "VABB2_1.95V";
 348                                         regulator-min-microvolt = <1950000>;
 349                                         regulator-max-microvolt = <1950000>;
 350                                         regulator-always-on;
 351                                         regulator-state-mem {
 352                                                 regulator-off-in-suspend;
 353                                         };
 354                                 };
 355
 356                                 ldo15_reg: ldo15 {
 357                                         regulator-compatible = "LDO15";
 358                                         regulator-name = "VHSIC_1.0V";
 359                                         regulator-min-microvolt = <1000000>;
 360                                         regulator-max-microvolt = <1000000>;
 361                                         regulator-state-mem {
 362                                                 regulator-on-in-suspend;
 363                                         };
 364                                 };
 365
 366                                 ldo16_reg: ldo16 {
 367                                         regulator-compatible = "LDO16";
 368                                         regulator-name = "VHSIC_1.8V";
 369                                         regulator-min-microvolt = <1800000>;
 370                                         regulator-max-microvolt = <1800000>;
 371                                         regulator-state-mem {
 372                                                 regulator-on-in-suspend;
 373                                         };
 374                                 };
 375
 376                                 ldo17_reg: ldo17 {
 377                                         regulator-compatible = "LDO17";
 378                                         regulator-name = "CAM_SENSOR_CORE_1.2V";
 379                                         regulator-min-microvolt = <1200000>;
 380                                         regulator-max-microvolt = <1200000>;
 381                                 };
 382
 383                                 ldo18_reg: ldo18 {
 384                                         regulator-compatible = "LDO18";
 385                                         regulator-name = "CAM_ISP_SEN_IO_1.8V";
 386                                         regulator-min-microvolt = <1800000>;
 387                                         regulator-max-microvolt = <1800000>;
 388                                 };
 389
 390                                 ldo19_reg: ldo19 {
 391                                         regulator-compatible = "LDO19";
 392                                         regulator-name = "VT_CAM_1.8V";
 393                                         regulator-min-microvolt = <1800000>;
 394                                         regulator-max-microvolt = <1800000>;
 395                                 };
 396
 397                                 ldo20_reg: ldo20 {
 398                                         regulator-compatible = "LDO20";
 399                                         regulator-name = "VDDQ_PRE_1.8V";
 400                                         regulator-min-microvolt = <1800000>;
 401                                         regulator-max-microvolt = <1800000>;
 402                                 };
 403
 404                                 ldo21_reg: ldo21 {
 405                                         regulator-compatible = "LDO21";
 406                                         regulator-name = "VTF_2.8V";
 407                                         regulator-min-microvolt = <2800000>;
 408                                         regulator-max-microvolt = <2800000>;
 409                                         maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 410                                 };
 411
 412                                 ldo22_reg: ldo22 {
 413                                         regulator-compatible = "LDO22";
 414                                         regulator-name = "VMEM_VDD_2.8V";
 415                                         regulator-min-microvolt = <2800000>;
 416                                         regulator-max-microvolt = <2800000>;
 417                                         maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 418                                 };
 419
 420                                 ldo23_reg: ldo23 {
 421                                         regulator-compatible = "LDO23";
 422                                         regulator-name = "TSP_AVDD_3.3V";
 423                                         regulator-min-microvolt = <3300000>;
 424                                         regulator-max-microvolt = <3300000>;
 425                                 };
 426
 427                                 ldo24_reg: ldo24 {
 428                                         regulator-compatible = "LDO24";
 429                                         regulator-name = "TSP_VDD_1.8V";
 430                                         regulator-min-microvolt = <1800000>;
 431                                         regulator-max-microvolt = <1800000>;
 432                                 };
 433
 434                                 ldo25_reg: ldo25 {
 435                                         regulator-compatible = "LDO25";
 436                                         regulator-name = "LCD_VCC_3.3V";
 437                                         regulator-min-microvolt = <2800000>;
 438                                         regulator-max-microvolt = <2800000>;
 439                                 };
 440
 441                                 ldo26_reg: ldo26 {
 442                                         regulator-compatible = "LDO26";
 443                                         regulator-name = "MOTOR_VCC_3.0V";
 444                                         regulator-min-microvolt = <3000000>;
 445                                         regulator-max-microvolt = <3000000>;
 446                                 };
 447
 448                                 buck1_reg: buck1 {
 449                                         regulator-compatible = "BUCK1";
 450                                         regulator-name = "vdd_mif";
 451                                         regulator-min-microvolt = <850000>;
 452                                         regulator-max-microvolt = <1100000>;
 453                                         regulator-always-on;
 454                                         regulator-boot-on;
 455                                         regulator-state-mem {
 456                                                 regulator-off-in-suspend;
 457                                         };
 458                                 };
 459
 460                                 buck2_reg: buck2 {
 461                                         regulator-compatible = "BUCK2";
 462                                         regulator-name = "vdd_arm";
 463                                         regulator-min-microvolt = <850000>;
 464                                         regulator-max-microvolt = <1500000>;
 465                                         regulator-always-on;
 466                                         regulator-boot-on;
 467                                         regulator-state-mem {
 468                                                 regulator-on-in-suspend;
 469                                         };
 470                                 };
 471
 472                                 buck3_reg: buck3 {
 473                                         regulator-compatible = "BUCK3";
 474                                         regulator-name = "vdd_int";
 475                                         regulator-min-microvolt = <850000>;
 476                                         regulator-max-microvolt = <1150000>;
 477                                         regulator-always-on;
 478                                         regulator-boot-on;
 479                                         regulator-state-mem {
 480                                                 regulator-off-in-suspend;
 481                                         };
 482                                 };
 483
 484                                 buck4_reg: buck4 {
 485                                         regulator-compatible = "BUCK4";
 486                                         regulator-name = "vdd_g3d";
 487                                         regulator-min-microvolt = <850000>;
 488                                         regulator-max-microvolt = <1150000>;
 489                                         regulator-boot-on;
 490                                         regulator-state-mem {
 491                                                 regulator-off-in-suspend;
 492                                         };
 493                                 };
 494
 495                                 buck5_reg: buck5 {
 496                                         regulator-compatible = "BUCK5";
 497                                         regulator-name = "VMEM_1.2V_AP";
 498                                         regulator-min-microvolt = <1200000>;
 499                                         regulator-max-microvolt = <1200000>;
 500                                         regulator-always-on;
 501                                 };
 502
 503                                 buck6_reg: buck6 {
 504                                         regulator-compatible = "BUCK6";
 505                                         regulator-name = "VCC_SUB_1.35V";
 506                                         regulator-min-microvolt = <1350000>;
 507                                         regulator-max-microvolt = <1350000>;
 508                                         regulator-always-on;
 509                                 };
 510
 511                                 buck7_reg: buck7 {
 512                                         regulator-compatible = "BUCK7";
 513                                         regulator-name = "VCC_SUB_2.0V";
 514                                         regulator-min-microvolt = <2000000>;
 515                                         regulator-max-microvolt = <2000000>;
 516                                         regulator-always-on;
 517                                 };
 518
 519                                 buck8_reg: buck8 {
 520                                         regulator-compatible = "BUCK8";
 521                                         regulator-name = "VMEM_VDDF_3.0V";
 522                                         regulator-min-microvolt = <2850000>;
 523                                         regulator-max-microvolt = <2850000>;
 524                                         maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 525                                 };
 526
 527                                 buck9_reg: buck9 {
 528                                         regulator-compatible = "BUCK9";
 529                                         regulator-name = "CAM_ISP_CORE_1.2V";
 530                                         regulator-min-microvolt = <1000000>;
 531                                         regulator-max-microvolt = <1200000>;
 532                                         maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 533                                 };
 534                         };
 535                 };
 536         };
 537
 538         i2c_max77693: i2c-gpio-1 {
 539                 compatible = "i2c-gpio";
 540                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 541                 i2c-gpio,delay-us = <2>;
 542                 #address-cells = <1>;
 543                 #size-cells = <0>;
 544                 status = "okay";
 545
 546                 max77693@66 {
 547                         compatible = "maxim,max77693";
 548                         interrupt-parent = <&gpx1>;
 549                         interrupts = <5 2>;
 550                         reg = <0x66>;
 551
 552                         regulators {
 553                                 esafeout1_reg: ESAFEOUT1@1 {
 554                                         regulator-name = "ESAFEOUT1";
 555                                 };
 556                                 esafeout2_reg: ESAFEOUT2@2 {
 557                                         regulator-name = "ESAFEOUT2";
 558                                 };
 559                                 charger_reg: CHARGER@0 {
 560                                         regulator-name = "CHARGER";
 561                                         regulator-min-microamp = <60000>;
 562                                         regulator-max-microamp = <2580000>;
 563                                 };
 564                         };
 565
 566                         max77693_haptic {
 567                                 compatible = "maxim,max77693-haptic";
 568                                 haptic-supply = <&ldo26_reg>;
 569                                 pwms = <&pwm 0 38022 0>;
 570                         };
 571
 572                         charger {
 573                                 compatible = "maxim,max77693-charger";
 574
 575                                 maxim,constant-microvolt = <4350000>;
 576                                 maxim,min-system-microvolt = <3600000>;
 577                                 maxim,thermal-regulation-celsius = <100>;
 578                                 maxim,battery-overcurrent-microamp = <3500000>;
 579                                 maxim,charge-input-threshold-microvolt = <4300000>;
 580                         };
 581                 };
 582         };
 583
 584         i2c_max77693_fuel: i2c-gpio-3 {
 585                 compatible = "i2c-gpio";
 586                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 587                 i2c-gpio,delay-us = <2>;
 588                 #address-cells = <1>;
 589                 #size-cells = <0>;
 590                 status = "okay";
 591
 592                 max77693-fuel-gauge@36 {
 593                         compatible = "maxim,max17047";
 594                         interrupt-parent = <&gpx2>;
 595                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 596                         reg = <0x36>;
 597                 };
 598         };
 599
 600         mmc@12550000 {
 601                 num-slots = <1>;
 602                 broken-cd;
 603                 non-removable;
 604                 card-detect-delay = <200>;
 605                 vmmc-supply = <&ldo22_reg>;
 606                 clock-frequency = <400000000>;
 607                 samsung,dw-mshc-ciu-div = <0>;
 608                 samsung,dw-mshc-sdr-timing = <2 3>;
 609                 samsung,dw-mshc-ddr-timing = <1 2>;
 610                 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 611                 pinctrl-names = "default";
 612                 status = "okay";
 613                 bus-width = <8>;
 614                 cap-mmc-highspeed;
 615         };
 616
 617         sdhci@12530000 {
 618                 bus-width = <4>;
 619                 cd-gpios = <&gpx3 4 0>;
 620                 cd-inverted;
 621                 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
 622                 pinctrl-names = "default";
 623                 vmmc-supply = <&ldo21_reg>;
 624                 status = "okay";
 625         };
 626
 627         serial@13800000 {
 628                 status = "okay";
 629         };
 630
 631         serial@13810000 {
 632                 status = "okay";
 633         };
 634
 635         serial@13820000 {
 636                 status = "okay";
 637         };
 638
 639         serial@13830000 {
 640                 status = "okay";
 641         };
 642
 643         tmu@100C0000 {
 644                 vtmu-supply = <&ldo10_reg>;
 645                 status = "okay";
 646         };
 647
 648         i2c_ak8975: i2c-gpio-0 {
 649                 compatible = "i2c-gpio";
 650                 gpios = <&gpy2 4 0>, <&gpy2 5 0>;
 651                 i2c-gpio,delay-us = <2>;
 652                 #address-cells = <1>;
 653                 #size-cells = <0>;
 654                 status = "okay";
 655
 656                 ak8975@0c {
 657                         compatible = "asahi-kasei,ak8975";
 658                         reg = <0x0c>;
 659                         gpios = <&gpj0 7 0>;
 660                 };
 661         };
 662
 663         i2c_cm36651: i2c-gpio-2 {
 664                 compatible = "i2c-gpio";
 665                 gpios = <&gpf0 0 1>, <&gpf0 1 1>;
 666                 i2c-gpio,delay-us = <2>;
 667                 #address-cells = <1>;
 668                 #size-cells = <0>;
 669
 670                 cm36651@18 {
 671                         compatible = "capella,cm36651";
 672                         reg = <0x18>;
 673                         interrupt-parent = <&gpx0>;
 674                         interrupts = <2 2>;
 675                         vled-supply = <&ps_als_reg>;
 676                 };
 677         };
 678
 679         spi_1: spi@13930000 {
 680                 pinctrl-names = "default";
 681                 pinctrl-0 = <&spi1_bus>;
 682                 cs-gpios = <&gpb 5 0>;
 683                 status = "okay";
 684
 685                 s5c73m3_spi: s5c73m3 {
 686                         compatible = "samsung,s5c73m3";
 687                         spi-max-frequency = <50000000>;
 688                         reg = <0>;
 689                         controller-data {
 690                                 samsung,spi-feedback-delay = <2>;
 691                         };
 692                 };
 693         };
 694
 695         pwm: pwm@139D0000 {
 696                 pinctrl-0 = <&pwm0_out>;
 697                 pinctrl-names = "default";
 698                 samsung,pwm-outputs = <0>;
 699                 status = "okay";
 700         };
 701
 702         dsi_0: dsi@11C80000 {
 703                 vddcore-supply = <&ldo8_reg>;
 704                 vddio-supply = <&ldo10_reg>;
 705                 samsung,pll-clock-frequency = <24000000>;
 706                 status = "okay";
 707
 708                 ports {
 709                         #address-cells = <1>;
 710                         #size-cells = <0>;
 711
 712                         port@1 {
 713                                 reg = <1>;
 714
 715                                 dsi_out: endpoint {
 716                                         remote-endpoint = <&dsi_in>;
 717                                         samsung,burst-clock-frequency = <500000000>;
 718                                         samsung,esc-clock-frequency = <20000000>;
 719                                 };
 720                         };
 721                 };
 722
 723                 panel@0 {
 724                         compatible = "samsung,s6e8aa0";
 725                         reg = <0>;
 726                         vdd3-supply = <&lcd_vdd3_reg>;
 727                         vci-supply = <&ldo25_reg>;
 728                         reset-gpios = <&gpy4 5 0>;
 729                         power-on-delay= <50>;
 730                         reset-delay = <100>;
 731                         init-delay = <100>;
 732                         flip-horizontal;
 733                         flip-vertical;
 734                         panel-width-mm = <58>;
 735                         panel-height-mm = <103>;
 736
 737                         display-timings {
 738                                 timing-0 {
 739                                         clock-frequency = <0>;
 740                                         hactive = <720>;
 741                                         vactive = <1280>;
 742                                         hfront-porch = <5>;
 743                                         hback-porch = <5>;
 744                                         hsync-len = <5>;
 745                                         vfront-porch = <13>;
 746                                         vback-porch = <1>;
 747                                         vsync-len = <2>;
 748                                 };
 749                         };
 750
 751                         port {
 752                                 dsi_in: endpoint {
 753                                         remote-endpoint = <&dsi_out>;
 754                                 };
 755                         };
 756                 };
 757         };
 758
 759         fimd@11c00000 {
 760                 status = "okay";
 761         };
 762
 763         camera: camera {
 764                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 765                 pinctrl-names = "default";
 766                 status = "okay";
 767                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 768                                   <&clock CLK_MOUT_CAM1>;
 769                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 770                                          <&clock CLK_XUSBXTI>;
 771
 772                 fimc_0: fimc@11800000 {
 773                         status = "okay";
 774                         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 775                                         <&clock CLK_SCLK_FIMC0>;
 776                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 777                         assigned-clock-rates = <0>, <176000000>;
 778                 };
 779
 780                 fimc_1: fimc@11810000 {
 781                         status = "okay";
 782                         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 783                                         <&clock CLK_SCLK_FIMC1>;
 784                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 785                         assigned-clock-rates = <0>, <176000000>;
 786                 };
 787
 788                 fimc_2: fimc@11820000 {
 789                         status = "okay";
 790                         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 791                                         <&clock CLK_SCLK_FIMC2>;
 792                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 793                         assigned-clock-rates = <0>, <176000000>;
 794                 };
 795
 796                 fimc_3: fimc@11830000 {
 797                         status = "okay";
 798                         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 799                                         <&clock CLK_SCLK_FIMC3>;
 800                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 801                         assigned-clock-rates = <0>, <176000000>;
 802                 };
 803
 804                 csis_0: csis@11880000 {
 805                         status = "okay";
 806                         vddcore-supply = <&ldo8_reg>;
 807                         vddio-supply = <&ldo10_reg>;
 808                         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 809                                         <&clock CLK_SCLK_CSIS0>;
 810                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 811                         assigned-clock-rates = <0>, <176000000>;
 812
 813                         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 814                         port@3 {
 815                                 reg = <3>;
 816                                 csis0_ep: endpoint {
 817                                         remote-endpoint = <&s5c73m3_ep>;
 818                                         data-lanes = <1 2 3 4>;
 819                                         samsung,csis-hs-settle = <12>;
 820                                 };
 821                         };
 822                 };
 823
 824                 csis_1: csis@11890000 {
 825                         status = "okay";
 826                         vddcore-supply = <&ldo8_reg>;
 827                         vddio-supply = <&ldo10_reg>;
 828                         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 829                                         <&clock CLK_SCLK_CSIS1>;
 830                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 831                         assigned-clock-rates = <0>, <176000000>;
 832
 833                         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 834                         port@4 {
 835                                 reg = <4>;
 836                                 csis1_ep: endpoint {
 837                                         remote-endpoint = <&is_s5k6a3_ep>;
 838                                         data-lanes = <1>;
 839                                         samsung,csis-hs-settle = <18>;
 840                                         samsung,csis-wclk;
 841                                 };
 842                         };
 843                 };
 844
 845                 fimc_lite_0: fimc-lite@12390000 {
 846                         status = "okay";
 847                 };
 848
 849                 fimc_lite_1: fimc-lite@123A0000 {
 850                         status = "okay";
 851                 };
 852
 853                 fimc-is@12000000 {
 854                         pinctrl-0 = <&fimc_is_uart>;
 855                         pinctrl-names = "default";
 856                         status = "okay";
 857
 858                         i2c1_isp: i2c-isp@12140000 {
 859                                 pinctrl-0 = <&fimc_is_i2c1>;
 860                                 pinctrl-names = "default";
 861
 862                                 s5k6a3@10 {
 863                                         compatible = "samsung,s5k6a3";
 864                                         reg = <0x10>;
 865                                         svdda-supply = <&cam_io_reg>;
 866                                         svddio-supply = <&ldo19_reg>;
 867                                         afvdd-supply = <&ldo19_reg>;
 868                                         clock-frequency = <24000000>;
 869                                         /* CAM_B_CLKOUT */
 870                                         clocks = <&camera 1>;
 871                                         clock-names = "extclk";
 872                                         samsung,camclk-out = <1>;
 873                                         gpios = <&gpm1 6 0>;
 874
 875                                         port {
 876                                                 is_s5k6a3_ep: endpoint {
 877                                                         remote-endpoint = <&csis1_ep>;
 878                                                         data-lanes = <1>;
 879                                                 };
 880                                         };
 881                                 };
 882                         };
 883                 };
 884         };
 885
 886         i2s0: i2s@03830000 {
 887                 pinctrl-0 = <&i2s0_bus>;
 888                 pinctrl-names = "default";
 889                 status = "okay";
 890         };
 891
 892         sound {
 893                 compatible = "samsung,trats2-audio";
 894                 samsung,i2s-controller = <&i2s0>;
 895                 samsung,model = "Trats2";
 896                 samsung,audio-codec = <&wm1811>;
 897                 samsung,audio-routing =
 898                         "SPK", "SPKOUTLN",
 899                         "SPK", "SPKOUTLP",
 900                         "SPK", "SPKOUTRN",
 901                         "SPK", "SPKOUTRP";
 902         };
 903
 904         exynos-usbphy@125B0000 {
 905                 status = "okay";
 906         };
 907
 908         hsotg@12480000 {
 909                 vusb_d-supply = <&ldo15_reg>;
 910                 vusb_a-supply = <&ldo12_reg>;
 911                 dr_mode = "peripheral";
 912                 status = "okay";
 913         };
 914
 915         thermistor-ap@0 {
 916                 compatible = "ntc,ncp15wb473";
 917                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 918                 pullup-ohm = <100000>;   /* 100K */
 919                 pulldown-ohm = <100000>; /* 100K */
 920                 io-channels = <&adc 1>;  /* AP temperature */
 921         };
 922
 923         thermistor-battery@1 {
 924                 compatible = "ntc,ncp15wb473";
 925                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 926                 pullup-ohm = <100000>;   /* 100K */
 927                 pulldown-ohm = <100000>; /* 100K */
 928                 io-channels = <&adc 2>;  /* Battery temperature */
 929         };
 930
 931         thermal-zones {
 932                 cpu_thermal: cpu-thermal {
 933                         cooling-maps {
 934                                 map0 {
 935                                      /* Corresponds to 800MHz at freq_table */
 936                                      cooling-device = <&cpu0 7 7>;
 937                                 };
 938                                 map1 {
 939                                      /* Corresponds to 200MHz at freq_table */
 940                                      cooling-device = <&cpu0 13 13>;
 941                                };
 942                        };
 943                 };
 944         };
 945 };
 946
 947 &pmu_system_controller {
 948         assigned-clocks = <&pmu_system_controller 0>;
 949         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 950 };
 951
 952 &ppmu_dmc0 {
 953         status = "okay";
 954
 955         events {
 956                 ppmu_dmc0_3: ppmu-event3-dmc0 {
 957                         event-name = "ppmu-event3-dmc0";
 958                 };
 959         };
 960 };
 961
 962 &ppmu_dmc1 {
 963         status = "okay";
 964
 965         events {
 966                 ppmu_dmc1_3: ppmu-event3-dmc1 {
 967                         event-name = "ppmu-event3-dmc1";
 968                 };
 969         };
 970 };
 971
 972 &ppmu_leftbus {
 973         status = "okay";
 974
 975         events {
 976                 ppmu_leftbus_3: ppmu-event3-leftbus {
 977                         event-name = "ppmu-event3-leftbus";
 978                 };
 979         };
 980 };
 981
 982 &ppmu_rightbus {
 983         status = "okay";
 984
 985         events {
 986                 ppmu_rightbus_3: ppmu-event3-rightbus {
 987                         event-name = "ppmu-event3-rightbus";
 988                 };
 989         };
 990 };
 991
 992 &pinctrl_0 {
 993         pinctrl-names = "default";
 994         pinctrl-0 = <&sleep0>;
 995
 996         sleep0: sleep-states {
 997                 PIN_SLP(gpa0-0, INPUT, NONE);
 998                 PIN_SLP(gpa0-1, OUT0, NONE);
 999                 PIN_SLP(gpa0-2, INPUT, NONE);
1000                 PIN_SLP(gpa0-3, INPUT, UP);
1001                 PIN_SLP(gpa0-4, INPUT, NONE);
1002                 PIN_SLP(gpa0-5, INPUT, DOWN);
1003                 PIN_SLP(gpa0-6, INPUT, DOWN);
1004                 PIN_SLP(gpa0-7, INPUT, UP);
1005
1006                 PIN_SLP(gpa1-0, INPUT, DOWN);
1007                 PIN_SLP(gpa1-1, INPUT, DOWN);
1008                 PIN_SLP(gpa1-2, INPUT, DOWN);
1009                 PIN_SLP(gpa1-3, INPUT, DOWN);
1010                 PIN_SLP(gpa1-4, INPUT, DOWN);
1011                 PIN_SLP(gpa1-5, INPUT, DOWN);
1012
1013                 PIN_SLP(gpb-0, INPUT, NONE);
1014                 PIN_SLP(gpb-1, INPUT, NONE);
1015                 PIN_SLP(gpb-2, INPUT, NONE);
1016                 PIN_SLP(gpb-3, INPUT, NONE);
1017                 PIN_SLP(gpb-4, INPUT, DOWN);
1018                 PIN_SLP(gpb-5, INPUT, UP);
1019                 PIN_SLP(gpb-6, INPUT, DOWN);
1020                 PIN_SLP(gpb-7, INPUT, DOWN);
1021
1022                 PIN_SLP(gpc0-0, INPUT, DOWN);
1023                 PIN_SLP(gpc0-1, INPUT, DOWN);
1024                 PIN_SLP(gpc0-2, INPUT, DOWN);
1025                 PIN_SLP(gpc0-3, INPUT, DOWN);
1026                 PIN_SLP(gpc0-4, INPUT, DOWN);
1027
1028                 PIN_SLP(gpc1-0, INPUT, NONE);
1029                 PIN_SLP(gpc1-1, PREV, NONE);
1030                 PIN_SLP(gpc1-2, INPUT, NONE);
1031                 PIN_SLP(gpc1-3, INPUT, NONE);
1032                 PIN_SLP(gpc1-4, INPUT, NONE);
1033
1034                 PIN_SLP(gpd0-0, INPUT, DOWN);
1035                 PIN_SLP(gpd0-1, INPUT, DOWN);
1036                 PIN_SLP(gpd0-2, INPUT, NONE);
1037                 PIN_SLP(gpd0-3, INPUT, NONE);
1038
1039                 PIN_SLP(gpd1-0, INPUT, DOWN);
1040                 PIN_SLP(gpd1-1, INPUT, DOWN);
1041                 PIN_SLP(gpd1-2, INPUT, NONE);
1042                 PIN_SLP(gpd1-3, INPUT, NONE);
1043
1044                 PIN_SLP(gpf0-0, INPUT, NONE);
1045                 PIN_SLP(gpf0-1, INPUT, NONE);
1046                 PIN_SLP(gpf0-2, INPUT, DOWN);
1047                 PIN_SLP(gpf0-3, INPUT, DOWN);
1048                 PIN_SLP(gpf0-4, INPUT, NONE);
1049                 PIN_SLP(gpf0-5, INPUT, DOWN);
1050                 PIN_SLP(gpf0-6, INPUT, NONE);
1051                 PIN_SLP(gpf0-7, INPUT, DOWN);
1052
1053                 PIN_SLP(gpf1-0, INPUT, DOWN);
1054                 PIN_SLP(gpf1-1, INPUT, DOWN);
1055                 PIN_SLP(gpf1-2, INPUT, DOWN);
1056                 PIN_SLP(gpf1-3, INPUT, DOWN);
1057                 PIN_SLP(gpf1-4, INPUT, NONE);
1058                 PIN_SLP(gpf1-5, INPUT, NONE);
1059                 PIN_SLP(gpf1-6, INPUT, DOWN);
1060                 PIN_SLP(gpf1-7, PREV, NONE);
1061
1062                 PIN_SLP(gpf2-0, PREV, NONE);
1063                 PIN_SLP(gpf2-1, INPUT, DOWN);
1064                 PIN_SLP(gpf2-2, INPUT, DOWN);
1065                 PIN_SLP(gpf2-3, INPUT, DOWN);
1066                 PIN_SLP(gpf2-4, INPUT, DOWN);
1067                 PIN_SLP(gpf2-5, INPUT, DOWN);
1068                 PIN_SLP(gpf2-6, INPUT, NONE);
1069                 PIN_SLP(gpf2-7, INPUT, NONE);
1070
1071                 PIN_SLP(gpf3-0, INPUT, NONE);
1072                 PIN_SLP(gpf3-1, PREV, NONE);
1073                 PIN_SLP(gpf3-2, PREV, NONE);
1074                 PIN_SLP(gpf3-3, PREV, NONE);
1075                 PIN_SLP(gpf3-4, OUT1, NONE);
1076                 PIN_SLP(gpf3-5, INPUT, DOWN);
1077
1078                 PIN_SLP(gpj0-0, PREV, NONE);
1079                 PIN_SLP(gpj0-1, PREV, NONE);
1080                 PIN_SLP(gpj0-2, PREV, NONE);
1081                 PIN_SLP(gpj0-3, INPUT, DOWN);
1082                 PIN_SLP(gpj0-4, PREV, NONE);
1083                 PIN_SLP(gpj0-5, PREV, NONE);
1084                 PIN_SLP(gpj0-6, INPUT, DOWN);
1085                 PIN_SLP(gpj0-7, INPUT, DOWN);
1086
1087                 PIN_SLP(gpj1-0, INPUT, DOWN);
1088                 PIN_SLP(gpj1-1, PREV, NONE);
1089                 PIN_SLP(gpj1-2, PREV, NONE);
1090                 PIN_SLP(gpj1-3, INPUT, DOWN);
1091                 PIN_SLP(gpj1-4, INPUT, DOWN);
1092         };
1093 };
1094
1095 &pinctrl_1 {
1096         pinctrl-names = "default";
1097         pinctrl-0 = <&sleep1>;
1098
1099         sleep1: sleep-states {
1100                 PIN_SLP(gpk0-0, PREV, NONE);
1101                 PIN_SLP(gpk0-1, PREV, NONE);
1102                 PIN_SLP(gpk0-2, OUT0, NONE);
1103                 PIN_SLP(gpk0-3, PREV, NONE);
1104                 PIN_SLP(gpk0-4, PREV, NONE);
1105                 PIN_SLP(gpk0-5, PREV, NONE);
1106                 PIN_SLP(gpk0-6, PREV, NONE);
1107
1108                 PIN_SLP(gpk1-0, INPUT, DOWN);
1109                 PIN_SLP(gpk1-1, INPUT, DOWN);
1110                 PIN_SLP(gpk1-2, INPUT, DOWN);
1111                 PIN_SLP(gpk1-3, PREV, NONE);
1112                 PIN_SLP(gpk1-4, PREV, NONE);
1113                 PIN_SLP(gpk1-5, PREV, NONE);
1114                 PIN_SLP(gpk1-6, PREV, NONE);
1115
1116                 PIN_SLP(gpk2-0, INPUT, DOWN);
1117                 PIN_SLP(gpk2-1, INPUT, DOWN);
1118                 PIN_SLP(gpk2-2, INPUT, DOWN);
1119                 PIN_SLP(gpk2-3, INPUT, DOWN);
1120                 PIN_SLP(gpk2-4, INPUT, DOWN);
1121                 PIN_SLP(gpk2-5, INPUT, DOWN);
1122                 PIN_SLP(gpk2-6, INPUT, DOWN);
1123
1124                 PIN_SLP(gpk3-0, OUT0, NONE);
1125                 PIN_SLP(gpk3-1, INPUT, NONE);
1126                 PIN_SLP(gpk3-2, INPUT, DOWN);
1127                 PIN_SLP(gpk3-3, INPUT, NONE);
1128                 PIN_SLP(gpk3-4, INPUT, NONE);
1129                 PIN_SLP(gpk3-5, INPUT, NONE);
1130                 PIN_SLP(gpk3-6, INPUT, NONE);
1131
1132                 PIN_SLP(gpl0-0, INPUT, DOWN);
1133                 PIN_SLP(gpl0-1, INPUT, DOWN);
1134                 PIN_SLP(gpl0-2, INPUT, DOWN);
1135                 PIN_SLP(gpl0-3, INPUT, DOWN);
1136                 PIN_SLP(gpl0-4, PREV, NONE);
1137                 PIN_SLP(gpl0-6, PREV, NONE);
1138
1139                 PIN_SLP(gpl1-0, INPUT, DOWN);
1140                 PIN_SLP(gpl1-1, INPUT, DOWN);
1141                 PIN_SLP(gpl2-0, INPUT, DOWN);
1142                 PIN_SLP(gpl2-1, INPUT, DOWN);
1143                 PIN_SLP(gpl2-2, INPUT, DOWN);
1144                 PIN_SLP(gpl2-3, INPUT, DOWN);
1145                 PIN_SLP(gpl2-4, INPUT, DOWN);
1146                 PIN_SLP(gpl2-5, INPUT, DOWN);
1147                 PIN_SLP(gpl2-6, PREV, NONE);
1148                 PIN_SLP(gpl2-7, INPUT, DOWN);
1149
1150                 PIN_SLP(gpm0-0, INPUT, DOWN);
1151                 PIN_SLP(gpm0-1, INPUT, DOWN);
1152                 PIN_SLP(gpm0-2, INPUT, DOWN);
1153                 PIN_SLP(gpm0-3, INPUT, DOWN);
1154                 PIN_SLP(gpm0-4, INPUT, DOWN);
1155                 PIN_SLP(gpm0-5, INPUT, DOWN);
1156                 PIN_SLP(gpm0-6, INPUT, DOWN);
1157                 PIN_SLP(gpm0-7, INPUT, DOWN);
1158
1159                 PIN_SLP(gpm1-0, INPUT, DOWN);
1160                 PIN_SLP(gpm1-1, INPUT, DOWN);
1161                 PIN_SLP(gpm1-2, INPUT, NONE);
1162                 PIN_SLP(gpm1-3, INPUT, NONE);
1163                 PIN_SLP(gpm1-4, INPUT, NONE);
1164                 PIN_SLP(gpm1-5, INPUT, NONE);
1165                 PIN_SLP(gpm1-6, INPUT, DOWN);
1166
1167                 PIN_SLP(gpm2-0, INPUT, NONE);
1168                 PIN_SLP(gpm2-1, INPUT, NONE);
1169                 PIN_SLP(gpm2-2, INPUT, DOWN);
1170                 PIN_SLP(gpm2-3, INPUT, DOWN);
1171                 PIN_SLP(gpm2-4, INPUT, DOWN);
1172
1173                 PIN_SLP(gpm3-0, PREV, NONE);
1174                 PIN_SLP(gpm3-1, PREV, NONE);
1175                 PIN_SLP(gpm3-2, PREV, NONE);
1176                 PIN_SLP(gpm3-3, OUT1, NONE);
1177                 PIN_SLP(gpm3-4, INPUT, DOWN);
1178                 PIN_SLP(gpm3-5, INPUT, DOWN);
1179                 PIN_SLP(gpm3-6, INPUT, DOWN);
1180                 PIN_SLP(gpm3-7, INPUT, DOWN);
1181
1182                 PIN_SLP(gpm4-0, INPUT, DOWN);
1183                 PIN_SLP(gpm4-1, INPUT, DOWN);
1184                 PIN_SLP(gpm4-2, INPUT, DOWN);
1185                 PIN_SLP(gpm4-3, INPUT, DOWN);
1186                 PIN_SLP(gpm4-4, INPUT, DOWN);
1187                 PIN_SLP(gpm4-5, INPUT, DOWN);
1188                 PIN_SLP(gpm4-6, INPUT, DOWN);
1189                 PIN_SLP(gpm4-7, INPUT, DOWN);
1190
1191                 PIN_SLP(gpy0-0, INPUT, DOWN);
1192                 PIN_SLP(gpy0-1, INPUT, DOWN);
1193                 PIN_SLP(gpy0-2, INPUT, DOWN);
1194                 PIN_SLP(gpy0-3, INPUT, DOWN);
1195                 PIN_SLP(gpy0-4, INPUT, DOWN);
1196                 PIN_SLP(gpy0-5, INPUT, DOWN);
1197
1198                 PIN_SLP(gpy1-0, INPUT, DOWN);
1199                 PIN_SLP(gpy1-1, INPUT, DOWN);
1200                 PIN_SLP(gpy1-2, INPUT, DOWN);
1201                 PIN_SLP(gpy1-3, INPUT, DOWN);
1202
1203                 PIN_SLP(gpy2-0, PREV, NONE);
1204                 PIN_SLP(gpy2-1, INPUT, DOWN);
1205                 PIN_SLP(gpy2-2, INPUT, NONE);
1206                 PIN_SLP(gpy2-3, INPUT, NONE);
1207                 PIN_SLP(gpy2-4, INPUT, NONE);
1208                 PIN_SLP(gpy2-5, INPUT, NONE);
1209
1210                 PIN_SLP(gpy3-0, INPUT, DOWN);
1211                 PIN_SLP(gpy3-1, INPUT, DOWN);
1212                 PIN_SLP(gpy3-2, INPUT, DOWN);
1213                 PIN_SLP(gpy3-3, INPUT, DOWN);
1214                 PIN_SLP(gpy3-4, INPUT, DOWN);
1215                 PIN_SLP(gpy3-5, INPUT, DOWN);
1216                 PIN_SLP(gpy3-6, INPUT, DOWN);
1217                 PIN_SLP(gpy3-7, INPUT, DOWN);
1218
1219                 PIN_SLP(gpy4-0, INPUT, DOWN);
1220                 PIN_SLP(gpy4-1, INPUT, DOWN);
1221                 PIN_SLP(gpy4-2, INPUT, DOWN);
1222                 PIN_SLP(gpy4-3, INPUT, DOWN);
1223                 PIN_SLP(gpy4-4, INPUT, DOWN);
1224                 PIN_SLP(gpy4-5, INPUT, DOWN);
1225                 PIN_SLP(gpy4-6, INPUT, DOWN);
1226                 PIN_SLP(gpy4-7, INPUT, DOWN);
1227
1228                 PIN_SLP(gpy5-0, INPUT, DOWN);
1229                 PIN_SLP(gpy5-1, INPUT, DOWN);
1230                 PIN_SLP(gpy5-2, INPUT, DOWN);
1231                 PIN_SLP(gpy5-3, INPUT, DOWN);
1232                 PIN_SLP(gpy5-4, INPUT, DOWN);
1233                 PIN_SLP(gpy5-5, INPUT, DOWN);
1234                 PIN_SLP(gpy5-6, INPUT, DOWN);
1235                 PIN_SLP(gpy5-7, INPUT, DOWN);
1236
1237                 PIN_SLP(gpy6-0, INPUT, DOWN);
1238                 PIN_SLP(gpy6-1, INPUT, DOWN);
1239                 PIN_SLP(gpy6-2, INPUT, DOWN);
1240                 PIN_SLP(gpy6-3, INPUT, DOWN);
1241                 PIN_SLP(gpy6-4, INPUT, DOWN);
1242                 PIN_SLP(gpy6-5, INPUT, DOWN);
1243                 PIN_SLP(gpy6-6, INPUT, DOWN);
1244                 PIN_SLP(gpy6-7, INPUT, DOWN);
1245         };
1246 };
1247
1248 &pinctrl_2 {
1249         pinctrl-names = "default";
1250         pinctrl-0 = <&sleep2>;
1251
1252         sleep2: sleep-states {
1253                 PIN_SLP(gpz-0, INPUT, DOWN);
1254                 PIN_SLP(gpz-1, INPUT, DOWN);
1255                 PIN_SLP(gpz-2, INPUT, DOWN);
1256                 PIN_SLP(gpz-3, INPUT, DOWN);
1257                 PIN_SLP(gpz-4, INPUT, DOWN);
1258                 PIN_SLP(gpz-5, INPUT, DOWN);
1259                 PIN_SLP(gpz-6, INPUT, DOWN);
1260         };
1261 };
1262
1263 &pinctrl_3 {
1264         pinctrl-names = "default";
1265         pinctrl-0 = <&sleep3>;
1266
1267         sleep3: sleep-states {
1268                 PIN_SLP(gpv0-0, INPUT, DOWN);
1269                 PIN_SLP(gpv0-1, INPUT, DOWN);
1270                 PIN_SLP(gpv0-2, INPUT, DOWN);
1271                 PIN_SLP(gpv0-3, INPUT, DOWN);
1272                 PIN_SLP(gpv0-4, INPUT, DOWN);
1273                 PIN_SLP(gpv0-5, INPUT, DOWN);
1274                 PIN_SLP(gpv0-6, INPUT, DOWN);
1275                 PIN_SLP(gpv0-7, INPUT, DOWN);
1276
1277                 PIN_SLP(gpv1-0, INPUT, DOWN);
1278                 PIN_SLP(gpv1-1, INPUT, DOWN);
1279                 PIN_SLP(gpv1-2, INPUT, DOWN);
1280                 PIN_SLP(gpv1-3, INPUT, DOWN);
1281                 PIN_SLP(gpv1-4, INPUT, DOWN);
1282                 PIN_SLP(gpv1-5, INPUT, DOWN);
1283                 PIN_SLP(gpv1-6, INPUT, DOWN);
1284                 PIN_SLP(gpv1-7, INPUT, DOWN);
1285
1286                 PIN_SLP(gpv2-0, INPUT, DOWN);
1287                 PIN_SLP(gpv2-1, INPUT, DOWN);
1288                 PIN_SLP(gpv2-2, INPUT, DOWN);
1289                 PIN_SLP(gpv2-3, INPUT, DOWN);
1290                 PIN_SLP(gpv2-4, INPUT, DOWN);
1291                 PIN_SLP(gpv2-5, INPUT, DOWN);
1292                 PIN_SLP(gpv2-6, INPUT, DOWN);
1293                 PIN_SLP(gpv2-7, INPUT, DOWN);
1294
1295                 PIN_SLP(gpv3-0, INPUT, DOWN);
1296                 PIN_SLP(gpv3-1, INPUT, DOWN);
1297                 PIN_SLP(gpv3-2, INPUT, DOWN);
1298                 PIN_SLP(gpv3-3, INPUT, DOWN);
1299                 PIN_SLP(gpv3-4, INPUT, DOWN);
1300                 PIN_SLP(gpv3-5, INPUT, DOWN);
1301                 PIN_SLP(gpv3-6, INPUT, DOWN);
1302                 PIN_SLP(gpv3-7, INPUT, DOWN);
1303
1304                 PIN_SLP(gpv4-0, INPUT, DOWN);
1305         };
1306 };