arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include "exynos4412-ppmu-common.dtsi"
  18 #include <dt-bindings/gpio/gpio.h>
  19 #include <dt-bindings/interrupt-controller/irq.h>
  20 #include <dt-bindings/clock/maxim,max77686.h>
  21
  22 / {
  23         model = "Samsung Trats 2 based on Exynos4412";
  24         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  25
  26         aliases {
  27                 i2c9 = &i2c_ak8975;
  28                 i2c10 = &i2c_cm36651;
  29                 i2c11 = &i2c_max77693;
  30                 i2c12 = &i2c_max77693_fuel;
  31         };
  32
  33         memory@40000000 {
  34                 device_type = "memory";
  35                 reg =  <0x40000000 0x40000000>;
  36         };
  37
  38         chosen {
  39                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  40                 stdout-path = &serial_2;
  41         };
  42
  43         firmware@0204F000 {
  44                 compatible = "samsung,secure-firmware";
  45                 reg = <0x0204F000 0x1000>;
  46         };
  47
  48         fixed-rate-clocks {
  49                 xxti {
  50                         compatible = "samsung,clock-xxti", "fixed-clock";
  51                         clock-frequency = <0>;
  52                 };
  53
  54                 xusbxti {
  55                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  56                         clock-frequency = <24000000>;
  57                 };
  58         };
  59
  60         regulators {
  61                 compatible = "simple-bus";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64
  65                 cam_io_reg: voltage-regulator-1 {
  66                         compatible = "regulator-fixed";
  67                         regulator-name = "CAM_SENSOR_A";
  68                         regulator-min-microvolt = <2800000>;
  69                         regulator-max-microvolt = <2800000>;
  70                         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
  71                         enable-active-high;
  72                 };
  73
  74                 lcd_vdd3_reg: voltage-regulator-2 {
  75                         compatible = "regulator-fixed";
  76                         regulator-name = "LCD_VDD_2.2V";
  77                         regulator-min-microvolt = <2200000>;
  78                         regulator-max-microvolt = <2200000>;
  79                         gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
  80                         enable-active-high;
  81                 };
  82
  83                 cam_af_reg: voltage-regulator-3 {
  84                         compatible = "regulator-fixed";
  85                         regulator-name = "CAM_AF";
  86                         regulator-min-microvolt = <2800000>;
  87                         regulator-max-microvolt = <2800000>;
  88                         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
  89                         enable-active-high;
  90                 };
  91
  92                 ps_als_reg: voltage-regulator-5 {
  93                         compatible = "regulator-fixed";
  94                         regulator-name = "LED_A_3.0V";
  95                         regulator-min-microvolt = <3000000>;
  96                         regulator-max-microvolt = <3000000>;
  97                         gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
  98                         enable-active-high;
  99                 };
 100         };
 101
 102         gpio-keys {
 103                 compatible = "gpio-keys";
 104
 105                 key-down {
 106                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 107                         linux,code = <114>;
 108                         label = "volume down";
 109                         debounce-interval = <10>;
 110                 };
 111
 112                 key-up {
 113                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 114                         linux,code = <115>;
 115                         label = "volume up";
 116                         debounce-interval = <10>;
 117                 };
 118
 119                 key-power {
 120                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 121                         linux,code = <116>;
 122                         label = "power";
 123                         debounce-interval = <10>;
 124                         wakeup-source;
 125                 };
 126
 127                 key-ok {
 128                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 129                         linux,code = <139>;
 130                         label = "ok";
 131                         debounce-inteval = <10>;
 132                         wakeup-source;
 133                 };
 134         };
 135
 136         i2c_max77693: i2c-gpio-1 {
 137                 compatible = "i2c-gpio";
 138                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 139                 i2c-gpio,delay-us = <2>;
 140                 #address-cells = <1>;
 141                 #size-cells = <0>;
 142                 status = "okay";
 143
 144                 max77693@66 {
 145                         compatible = "maxim,max77693";
 146                         interrupt-parent = <&gpx1>;
 147                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 148                         reg = <0x66>;
 149
 150                         regulators {
 151                                 esafeout1_reg: ESAFEOUT1 {
 152                                         regulator-name = "ESAFEOUT1";
 153                                 };
 154                                 esafeout2_reg: ESAFEOUT2 {
 155                                         regulator-name = "ESAFEOUT2";
 156                                 };
 157                                 charger_reg: CHARGER {
 158                                         regulator-name = "CHARGER";
 159                                         regulator-min-microamp = <60000>;
 160                                         regulator-max-microamp = <2580000>;
 161                                 };
 162                         };
 163
 164                         max77693_haptic {
 165                                 compatible = "maxim,max77693-haptic";
 166                                 haptic-supply = <&ldo26_reg>;
 167                                 pwms = <&pwm 0 38022 0>;
 168                         };
 169
 170                         charger {
 171                                 compatible = "maxim,max77693-charger";
 172
 173                                 maxim,constant-microvolt = <4350000>;
 174                                 maxim,min-system-microvolt = <3600000>;
 175                                 maxim,thermal-regulation-celsius = <100>;
 176                                 maxim,battery-overcurrent-microamp = <3500000>;
 177                                 maxim,charge-input-threshold-microvolt = <4300000>;
 178                         };
 179                 };
 180         };
 181
 182         i2c_max77693_fuel: i2c-gpio-3 {
 183                 compatible = "i2c-gpio";
 184                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 185                 i2c-gpio,delay-us = <2>;
 186                 #address-cells = <1>;
 187                 #size-cells = <0>;
 188                 status = "okay";
 189
 190                 max77693-fuel-gauge@36 {
 191                         compatible = "maxim,max17047";
 192                         interrupt-parent = <&gpx2>;
 193                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 194                         reg = <0x36>;
 195
 196                         maxim,over-heat-temp = <700>;
 197                         maxim,over-volt = <4500>;
 198                 };
 199         };
 200
 201         i2c_ak8975: i2c-gpio-0 {
 202                 compatible = "i2c-gpio";
 203                 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 204                 i2c-gpio,delay-us = <2>;
 205                 #address-cells = <1>;
 206                 #size-cells = <0>;
 207                 status = "okay";
 208
 209                 ak8975@0c {
 210                         compatible = "asahi-kasei,ak8975";
 211                         reg = <0x0c>;
 212                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 213                 };
 214         };
 215
 216         i2c_cm36651: i2c-gpio-2 {
 217                 compatible = "i2c-gpio";
 218                 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 219                 i2c-gpio,delay-us = <2>;
 220                 #address-cells = <1>;
 221                 #size-cells = <0>;
 222
 223                 cm36651@18 {
 224                         compatible = "capella,cm36651";
 225                         reg = <0x18>;
 226                         interrupt-parent = <&gpx0>;
 227                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 228                         vled-supply = <&ps_als_reg>;
 229                 };
 230         };
 231
 232         camera: camera {
 233                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 234                 pinctrl-names = "default";
 235                 status = "okay";
 236                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 237                                   <&clock CLK_MOUT_CAM1>;
 238                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 239                                          <&clock CLK_XUSBXTI>;
 240
 241
 242         };
 243
 244         sound {
 245                 compatible = "samsung,trats2-audio";
 246                 samsung,i2s-controller = <&i2s0>;
 247                 samsung,model = "Trats2";
 248                 samsung,audio-codec = <&wm1811>;
 249                 samsung,audio-routing =
 250                         "SPK", "SPKOUTLN",
 251                         "SPK", "SPKOUTLP",
 252                         "SPK", "SPKOUTRN",
 253                         "SPK", "SPKOUTRP";
 254         };
 255
 256         thermistor-ap {
 257                 compatible = "murata,ncp15wb473";
 258                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 259                 pullup-ohm = <100000>;   /* 100K */
 260                 pulldown-ohm = <100000>; /* 100K */
 261                 io-channels = <&adc 1>;  /* AP temperature */
 262         };
 263
 264         thermistor-battery {
 265                 compatible = "murata,ncp15wb473";
 266                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 267                 pullup-ohm = <100000>;   /* 100K */
 268                 pulldown-ohm = <100000>; /* 100K */
 269                 io-channels = <&adc 2>;  /* Battery temperature */
 270         };
 271
 272         thermal-zones {
 273                 cpu_thermal: cpu-thermal {
 274                         cooling-maps {
 275                                 map0 {
 276                                      /* Corresponds to 800MHz at freq_table */
 277                                      cooling-device = <&cpu0 7 7>;
 278                                 };
 279                                 map1 {
 280                                      /* Corresponds to 200MHz at freq_table */
 281                                      cooling-device = <&cpu0 13 13>;
 282                                };
 283                        };
 284                 };
 285         };
 286 };
 287
 288 &adc {
 289         vdd-supply = <&ldo3_reg>;
 290         status = "okay";
 291 };
 292
 293 &bus_dmc {
 294         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 295         vdd-supply = <&buck1_reg>;
 296         status = "okay";
 297 };
 298
 299 &bus_acp {
 300         devfreq = <&bus_dmc>;
 301         status = "okay";
 302 };
 303
 304 &bus_c2c {
 305         devfreq = <&bus_dmc>;
 306         status = "okay";
 307 };
 308
 309 &bus_leftbus {
 310         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 311         vdd-supply = <&buck3_reg>;
 312         status = "okay";
 313 };
 314
 315 &bus_rightbus {
 316         devfreq = <&bus_leftbus>;
 317         status = "okay";
 318 };
 319
 320 &bus_display {
 321         devfreq = <&bus_leftbus>;
 322         status = "okay";
 323 };
 324
 325 &bus_fsys {
 326         devfreq = <&bus_leftbus>;
 327         status = "okay";
 328 };
 329
 330 &bus_peri {
 331         devfreq = <&bus_leftbus>;
 332         status = "okay";
 333 };
 334
 335 &bus_mfc {
 336         devfreq = <&bus_leftbus>;
 337         status = "okay";
 338 };
 339
 340 &cpu0 {
 341         cpu0-supply = <&buck2_reg>;
 342 };
 343
 344 &csis_0 {
 345         status = "okay";
 346         vddcore-supply = <&ldo8_reg>;
 347         vddio-supply = <&ldo10_reg>;
 348         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 349                         <&clock CLK_SCLK_CSIS0>;
 350         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 351         assigned-clock-rates = <0>, <176000000>;
 352
 353         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 354         port@3 {
 355                 reg = <3>;
 356                 csis0_ep: endpoint {
 357                         remote-endpoint = <&s5c73m3_ep>;
 358                         data-lanes = <1 2 3 4>;
 359                         samsung,csis-hs-settle = <12>;
 360                 };
 361         };
 362 };
 363
 364 &csis_1 {
 365         status = "okay";
 366         vddcore-supply = <&ldo8_reg>;
 367         vddio-supply = <&ldo10_reg>;
 368         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 369                         <&clock CLK_SCLK_CSIS1>;
 370         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 371         assigned-clock-rates = <0>, <176000000>;
 372
 373         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 374         port@4 {
 375                 reg = <4>;
 376                 csis1_ep: endpoint {
 377                         remote-endpoint = <&is_s5k6a3_ep>;
 378                         data-lanes = <1>;
 379                         samsung,csis-hs-settle = <18>;
 380                         samsung,csis-wclk;
 381                 };
 382         };
 383 };
 384
 385 &dsi_0 {
 386         vddcore-supply = <&ldo8_reg>;
 387         vddio-supply = <&ldo10_reg>;
 388         samsung,burst-clock-frequency = <500000000>;
 389         samsung,esc-clock-frequency = <20000000>;
 390         samsung,pll-clock-frequency = <24000000>;
 391         status = "okay";
 392
 393         panel@0 {
 394                 compatible = "samsung,s6e8aa0";
 395                 reg = <0>;
 396                 vdd3-supply = <&lcd_vdd3_reg>;
 397                 vci-supply = <&ldo25_reg>;
 398                 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 399                 power-on-delay= <50>;
 400                 reset-delay = <100>;
 401                 init-delay = <100>;
 402                 flip-horizontal;
 403                 flip-vertical;
 404                 panel-width-mm = <58>;
 405                 panel-height-mm = <103>;
 406
 407                 display-timings {
 408                         timing-0 {
 409                                 clock-frequency = <57153600>;
 410                                 hactive = <720>;
 411                                 vactive = <1280>;
 412                                 hfront-porch = <5>;
 413                                 hback-porch = <5>;
 414                                 hsync-len = <5>;
 415                                 vfront-porch = <13>;
 416                                 vback-porch = <1>;
 417                                 vsync-len = <2>;
 418                         };
 419                 };
 420         };
 421 };
 422
 423 &exynos_usbphy {
 424         vbus-supply = <&esafeout1_reg>;
 425         status = "okay";
 426 };
 427
 428 &fimc_0 {
 429         status = "okay";
 430         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 431                         <&clock CLK_SCLK_FIMC0>;
 432         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 433         assigned-clock-rates = <0>, <176000000>;
 434 };
 435
 436 &fimc_1 {
 437         status = "okay";
 438         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 439                         <&clock CLK_SCLK_FIMC1>;
 440         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 441         assigned-clock-rates = <0>, <176000000>;
 442 };
 443
 444 &fimc_2 {
 445         status = "okay";
 446         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 447                         <&clock CLK_SCLK_FIMC2>;
 448         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 449         assigned-clock-rates = <0>, <176000000>;
 450 };
 451
 452 &fimc_3 {
 453         status = "okay";
 454         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 455                         <&clock CLK_SCLK_FIMC3>;
 456         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 457         assigned-clock-rates = <0>, <176000000>;
 458 };
 459
 460 &fimc_is {
 461         pinctrl-0 = <&fimc_is_uart>;
 462         pinctrl-names = "default";
 463         status = "okay";
 464
 465         i2c1_isp: i2c-isp@12140000 {
 466                 pinctrl-0 = <&fimc_is_i2c1>;
 467                 pinctrl-names = "default";
 468
 469                 s5k6a3@10 {
 470                         compatible = "samsung,s5k6a3";
 471                         reg = <0x10>;
 472                         svdda-supply = <&cam_io_reg>;
 473                         svddio-supply = <&ldo19_reg>;
 474                         afvdd-supply = <&ldo19_reg>;
 475                         clock-frequency = <24000000>;
 476                         /* CAM_B_CLKOUT */
 477                         clocks = <&camera 1>;
 478                         clock-names = "extclk";
 479                         samsung,camclk-out = <1>;
 480                         gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 481
 482                         port {
 483                                 is_s5k6a3_ep: endpoint {
 484                                         remote-endpoint = <&csis1_ep>;
 485                                         data-lanes = <1>;
 486                                 };
 487                         };
 488                 };
 489         };
 490 };
 491
 492 &fimc_lite_0 {
 493         status = "okay";
 494 };
 495
 496 &fimc_lite_1 {
 497         status = "okay";
 498 };
 499
 500 &fimd {
 501         status = "okay";
 502 };
 503
 504 &hsotg {
 505         vusb_d-supply = <&ldo15_reg>;
 506         vusb_a-supply = <&ldo12_reg>;
 507         dr_mode = "peripheral";
 508         status = "okay";
 509 };
 510
 511 &i2c_0 {
 512         samsung,i2c-sda-delay = <100>;
 513         samsung,i2c-slave-addr = <0x10>;
 514         samsung,i2c-max-bus-freq = <400000>;
 515         pinctrl-0 = <&i2c0_bus>;
 516         pinctrl-names = "default";
 517         status = "okay";
 518
 519         s5c73m3@3c {
 520                 compatible = "samsung,s5c73m3";
 521                 reg = <0x3c>;
 522                 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
 523                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 524                 vdd-int-supply = <&buck9_reg>;
 525                 vddio-cis-supply = <&ldo9_reg>;
 526                 vdda-supply = <&ldo17_reg>;
 527                 vddio-host-supply = <&ldo18_reg>;
 528                 vdd-af-supply = <&cam_af_reg>;
 529                 vdd-reg-supply = <&cam_io_reg>;
 530                 clock-frequency = <24000000>;
 531                 /* CAM_A_CLKOUT */
 532                 clocks = <&camera 0>;
 533                 clock-names = "cis_extclk";
 534                 port {
 535                         s5c73m3_ep: endpoint {
 536                                 remote-endpoint = <&csis0_ep>;
 537                                 data-lanes = <1 2 3 4>;
 538                         };
 539                 };
 540         };
 541 };
 542
 543 &i2c_3 {
 544         samsung,i2c-sda-delay = <100>;
 545         samsung,i2c-slave-addr = <0x10>;
 546         samsung,i2c-max-bus-freq = <400000>;
 547         pinctrl-0 = <&i2c3_bus>;
 548         pinctrl-names = "default";
 549         status = "okay";
 550
 551         mms114-touchscreen@48 {
 552                 compatible = "melfas,mms114";
 553                 reg = <0x48>;
 554                 interrupt-parent = <&gpm2>;
 555                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 556                 x-size = <720>;
 557                 y-size = <1280>;
 558                 avdd-supply = <&ldo23_reg>;
 559                 vdd-supply = <&ldo24_reg>;
 560         };
 561 };
 562
 563 &i2c_4 {
 564         samsung,i2c-sda-delay = <100>;
 565         samsung,i2c-slave-addr = <0x10>;
 566         samsung,i2c-max-bus-freq = <100000>;
 567         pinctrl-0 = <&i2c4_bus>;
 568         pinctrl-names = "default";
 569         status = "okay";
 570
 571         wm1811: wm1811@1a {
 572                 compatible = "wlf,wm1811";
 573                 reg = <0x1a>;
 574                 clocks = <&pmu_system_controller 0>;
 575                 clock-names = "MCLK1";
 576                 DCVDD-supply = <&ldo3_reg>;
 577                 DBVDD1-supply = <&ldo3_reg>;
 578                 wlf,ldo1ena = <&gpj0 4 0>;
 579         };
 580 };
 581
 582 &i2c_7 {
 583         samsung,i2c-sda-delay = <100>;
 584         samsung,i2c-slave-addr = <0x10>;
 585         samsung,i2c-max-bus-freq = <100000>;
 586         pinctrl-0 = <&i2c7_bus>;
 587         pinctrl-names = "default";
 588         status = "okay";
 589
 590         max77686: max77686_pmic@09 {
 591                 compatible = "maxim,max77686";
 592                 interrupt-parent = <&gpx0>;
 593                 interrupts = <7 IRQ_TYPE_NONE>;
 594                 reg = <0x09>;
 595                 #clock-cells = <1>;
 596
 597                 voltage-regulators {
 598                         ldo1_reg: LDO1 {
 599                                 regulator-name = "VALIVE_1.0V_AP";
 600                                 regulator-min-microvolt = <1000000>;
 601                                 regulator-max-microvolt = <1000000>;
 602                                 regulator-always-on;
 603                         };
 604
 605                         ldo2_reg: LDO2 {
 606                                 regulator-name = "VM1M2_1.2V_AP";
 607                                 regulator-min-microvolt = <1200000>;
 608                                 regulator-max-microvolt = <1200000>;
 609                                 regulator-always-on;
 610                                 regulator-state-mem {
 611                                         regulator-on-in-suspend;
 612                                 };
 613                         };
 614
 615                         ldo3_reg: LDO3 {
 616                                 regulator-name = "VCC_1.8V_AP";
 617                                 regulator-min-microvolt = <1800000>;
 618                                 regulator-max-microvolt = <1800000>;
 619                                 regulator-always-on;
 620                         };
 621
 622                         ldo4_reg: LDO4 {
 623                                 regulator-name = "VCC_2.8V_AP";
 624                                 regulator-min-microvolt = <2800000>;
 625                                 regulator-max-microvolt = <2800000>;
 626                                 regulator-always-on;
 627                         };
 628
 629                         ldo5_reg: LDO5 {
 630                                 regulator-name = "VCC_1.8V_IO";
 631                                 regulator-min-microvolt = <1800000>;
 632                                 regulator-max-microvolt = <1800000>;
 633                                 regulator-always-on;
 634                         };
 635
 636                         ldo6_reg: LDO6 {
 637                                 regulator-name = "VMPLL_1.0V_AP";
 638                                 regulator-min-microvolt = <1000000>;
 639                                 regulator-max-microvolt = <1000000>;
 640                                 regulator-always-on;
 641                                 regulator-state-mem {
 642                                         regulator-on-in-suspend;
 643                                 };
 644                         };
 645
 646                         ldo7_reg: LDO7 {
 647                                 regulator-name = "VPLL_1.0V_AP";
 648                                 regulator-min-microvolt = <1000000>;
 649                                 regulator-max-microvolt = <1000000>;
 650                                 regulator-always-on;
 651                                 regulator-state-mem {
 652                                         regulator-on-in-suspend;
 653                                 };
 654                         };
 655
 656                         ldo8_reg: LDO8 {
 657                                 regulator-name = "VMIPI_1.0V";
 658                                 regulator-min-microvolt = <1000000>;
 659                                 regulator-max-microvolt = <1000000>;
 660                                 regulator-state-mem {
 661                                         regulator-off-in-suspend;
 662                                 };
 663                         };
 664
 665                         ldo9_reg: LDO9 {
 666                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 667                                 regulator-min-microvolt = <1200000>;
 668                                 regulator-max-microvolt = <1200000>;
 669                         };
 670
 671                         ldo10_reg: LDO10 {
 672                                 regulator-name = "VMIPI_1.8V";
 673                                 regulator-min-microvolt = <1800000>;
 674                                 regulator-max-microvolt = <1800000>;
 675                                 regulator-state-mem {
 676                                         regulator-off-in-suspend;
 677                                 };
 678                         };
 679
 680                         ldo11_reg: LDO11 {
 681                                 regulator-name = "VABB1_1.95V";
 682                                 regulator-min-microvolt = <1950000>;
 683                                 regulator-max-microvolt = <1950000>;
 684                                 regulator-always-on;
 685                                 regulator-state-mem {
 686                                         regulator-off-in-suspend;
 687                                 };
 688                         };
 689
 690                         ldo12_reg: LDO12 {
 691                                 regulator-name = "VUOTG_3.0V";
 692                                 regulator-min-microvolt = <3000000>;
 693                                 regulator-max-microvolt = <3000000>;
 694                                 regulator-state-mem {
 695                                         regulator-off-in-suspend;
 696                                 };
 697                         };
 698
 699                         ldo13_reg: LDO13 {
 700                                 regulator-name = "NFC_AVDD_1.8V";
 701                                 regulator-min-microvolt = <1800000>;
 702                                 regulator-max-microvolt = <1800000>;
 703                         };
 704
 705                         ldo14_reg: LDO14 {
 706                                 regulator-name = "VABB2_1.95V";
 707                                 regulator-min-microvolt = <1950000>;
 708                                 regulator-max-microvolt = <1950000>;
 709                                 regulator-always-on;
 710                                 regulator-state-mem {
 711                                         regulator-off-in-suspend;
 712                                 };
 713                         };
 714
 715                         ldo15_reg: LDO15 {
 716                                 regulator-name = "VHSIC_1.0V";
 717                                 regulator-min-microvolt = <1000000>;
 718                                 regulator-max-microvolt = <1000000>;
 719                                 regulator-state-mem {
 720                                         regulator-on-in-suspend;
 721                                 };
 722                         };
 723
 724                         ldo16_reg: LDO16 {
 725                                 regulator-name = "VHSIC_1.8V";
 726                                 regulator-min-microvolt = <1800000>;
 727                                 regulator-max-microvolt = <1800000>;
 728                                 regulator-state-mem {
 729                                         regulator-on-in-suspend;
 730                                 };
 731                         };
 732
 733                         ldo17_reg: LDO17 {
 734                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 735                                 regulator-min-microvolt = <1200000>;
 736                                 regulator-max-microvolt = <1200000>;
 737                         };
 738
 739                         ldo18_reg: LDO18 {
 740                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 741                                 regulator-min-microvolt = <1800000>;
 742                                 regulator-max-microvolt = <1800000>;
 743                         };
 744
 745                         ldo19_reg: LDO19 {
 746                                 regulator-name = "VT_CAM_1.8V";
 747                                 regulator-min-microvolt = <1800000>;
 748                                 regulator-max-microvolt = <1800000>;
 749                         };
 750
 751                         ldo20_reg: LDO20 {
 752                                 regulator-name = "VDDQ_PRE_1.8V";
 753                                 regulator-min-microvolt = <1800000>;
 754                                 regulator-max-microvolt = <1800000>;
 755                         };
 756
 757                         ldo21_reg: LDO21 {
 758                                 regulator-name = "VTF_2.8V";
 759                                 regulator-min-microvolt = <2800000>;
 760                                 regulator-max-microvolt = <2800000>;
 761                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 762                         };
 763
 764                         ldo22_reg: LDO22 {
 765                                 regulator-name = "VMEM_VDD_2.8V";
 766                                 regulator-min-microvolt = <2800000>;
 767                                 regulator-max-microvolt = <2800000>;
 768                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 769                         };
 770
 771                         ldo23_reg: LDO23 {
 772                                 regulator-name = "TSP_AVDD_3.3V";
 773                                 regulator-min-microvolt = <3300000>;
 774                                 regulator-max-microvolt = <3300000>;
 775                         };
 776
 777                         ldo24_reg: LDO24 {
 778                                 regulator-name = "TSP_VDD_1.8V";
 779                                 regulator-min-microvolt = <1800000>;
 780                                 regulator-max-microvolt = <1800000>;
 781                         };
 782
 783                         ldo25_reg: LDO25 {
 784                                 regulator-name = "LCD_VCC_3.3V";
 785                                 regulator-min-microvolt = <2800000>;
 786                                 regulator-max-microvolt = <2800000>;
 787                         };
 788
 789                         ldo26_reg: LDO26 {
 790                                 regulator-name = "MOTOR_VCC_3.0V";
 791                                 regulator-min-microvolt = <3000000>;
 792                                 regulator-max-microvolt = <3000000>;
 793                         };
 794
 795                         buck1_reg: BUCK1 {
 796                                 regulator-name = "vdd_mif";
 797                                 regulator-min-microvolt = <850000>;
 798                                 regulator-max-microvolt = <1100000>;
 799                                 regulator-always-on;
 800                                 regulator-boot-on;
 801                                 regulator-state-mem {
 802                                         regulator-off-in-suspend;
 803                                 };
 804                         };
 805
 806                         buck2_reg: BUCK2 {
 807                                 regulator-name = "vdd_arm";
 808                                 regulator-min-microvolt = <850000>;
 809                                 regulator-max-microvolt = <1500000>;
 810                                 regulator-always-on;
 811                                 regulator-boot-on;
 812                                 regulator-state-mem {
 813                                         regulator-on-in-suspend;
 814                                 };
 815                         };
 816
 817                         buck3_reg: BUCK3 {
 818                                 regulator-name = "vdd_int";
 819                                 regulator-min-microvolt = <850000>;
 820                                 regulator-max-microvolt = <1150000>;
 821                                 regulator-always-on;
 822                                 regulator-boot-on;
 823                                 regulator-state-mem {
 824                                         regulator-off-in-suspend;
 825                                 };
 826                         };
 827
 828                         buck4_reg: BUCK4 {
 829                                 regulator-name = "vdd_g3d";
 830                                 regulator-min-microvolt = <850000>;
 831                                 regulator-max-microvolt = <1150000>;
 832                                 regulator-boot-on;
 833                                 regulator-state-mem {
 834                                         regulator-off-in-suspend;
 835                                 };
 836                         };
 837
 838                         buck5_reg: BUCK5 {
 839                                 regulator-name = "VMEM_1.2V_AP";
 840                                 regulator-min-microvolt = <1200000>;
 841                                 regulator-max-microvolt = <1200000>;
 842                                 regulator-always-on;
 843                         };
 844
 845                         buck6_reg: BUCK6 {
 846                                 regulator-name = "VCC_SUB_1.35V";
 847                                 regulator-min-microvolt = <1350000>;
 848                                 regulator-max-microvolt = <1350000>;
 849                                 regulator-always-on;
 850                         };
 851
 852                         buck7_reg: BUCK7 {
 853                                 regulator-name = "VCC_SUB_2.0V";
 854                                 regulator-min-microvolt = <2000000>;
 855                                 regulator-max-microvolt = <2000000>;
 856                                 regulator-always-on;
 857                         };
 858
 859                         buck8_reg: BUCK8 {
 860                                 regulator-name = "VMEM_VDDF_3.0V";
 861                                 regulator-min-microvolt = <2850000>;
 862                                 regulator-max-microvolt = <2850000>;
 863                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 864                         };
 865
 866                         buck9_reg: BUCK9 {
 867                                 regulator-name = "CAM_ISP_CORE_1.2V";
 868                                 regulator-min-microvolt = <1000000>;
 869                                 regulator-max-microvolt = <1200000>;
 870                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 871                         };
 872                 };
 873         };
 874 };
 875
 876 &i2s0 {
 877         pinctrl-0 = <&i2s0_bus>;
 878         pinctrl-names = "default";
 879         status = "okay";
 880 };
 881
 882 &mshc_0 {
 883         broken-cd;
 884         non-removable;
 885         card-detect-delay = <200>;
 886         vmmc-supply = <&ldo22_reg>;
 887         clock-frequency = <400000000>;
 888         samsung,dw-mshc-ciu-div = <0>;
 889         samsung,dw-mshc-sdr-timing = <2 3>;
 890         samsung,dw-mshc-ddr-timing = <1 2>;
 891         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 892         pinctrl-names = "default";
 893         status = "okay";
 894         bus-width = <8>;
 895         cap-mmc-highspeed;
 896 };
 897
 898 &pmu_system_controller {
 899         assigned-clocks = <&pmu_system_controller 0>;
 900         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 901 };
 902
 903 &pinctrl_0 {
 904         pinctrl-names = "default";
 905         pinctrl-0 = <&sleep0>;
 906
 907         sleep0: sleep-states {
 908                 PIN_SLP(gpa0-0, INPUT, NONE);
 909                 PIN_SLP(gpa0-1, OUT0, NONE);
 910                 PIN_SLP(gpa0-2, INPUT, NONE);
 911                 PIN_SLP(gpa0-3, INPUT, UP);
 912                 PIN_SLP(gpa0-4, INPUT, NONE);
 913                 PIN_SLP(gpa0-5, INPUT, DOWN);
 914                 PIN_SLP(gpa0-6, INPUT, DOWN);
 915                 PIN_SLP(gpa0-7, INPUT, UP);
 916
 917                 PIN_SLP(gpa1-0, INPUT, DOWN);
 918                 PIN_SLP(gpa1-1, INPUT, DOWN);
 919                 PIN_SLP(gpa1-2, INPUT, DOWN);
 920                 PIN_SLP(gpa1-3, INPUT, DOWN);
 921                 PIN_SLP(gpa1-4, INPUT, DOWN);
 922                 PIN_SLP(gpa1-5, INPUT, DOWN);
 923
 924                 PIN_SLP(gpb-0, INPUT, NONE);
 925                 PIN_SLP(gpb-1, INPUT, NONE);
 926                 PIN_SLP(gpb-2, INPUT, NONE);
 927                 PIN_SLP(gpb-3, INPUT, NONE);
 928                 PIN_SLP(gpb-4, INPUT, DOWN);
 929                 PIN_SLP(gpb-5, INPUT, UP);
 930                 PIN_SLP(gpb-6, INPUT, DOWN);
 931                 PIN_SLP(gpb-7, INPUT, DOWN);
 932
 933                 PIN_SLP(gpc0-0, INPUT, DOWN);
 934                 PIN_SLP(gpc0-1, INPUT, DOWN);
 935                 PIN_SLP(gpc0-2, INPUT, DOWN);
 936                 PIN_SLP(gpc0-3, INPUT, DOWN);
 937                 PIN_SLP(gpc0-4, INPUT, DOWN);
 938
 939                 PIN_SLP(gpc1-0, INPUT, NONE);
 940                 PIN_SLP(gpc1-1, PREV, NONE);
 941                 PIN_SLP(gpc1-2, INPUT, NONE);
 942                 PIN_SLP(gpc1-3, INPUT, NONE);
 943                 PIN_SLP(gpc1-4, INPUT, NONE);
 944
 945                 PIN_SLP(gpd0-0, INPUT, DOWN);
 946                 PIN_SLP(gpd0-1, INPUT, DOWN);
 947                 PIN_SLP(gpd0-2, INPUT, NONE);
 948                 PIN_SLP(gpd0-3, INPUT, NONE);
 949
 950                 PIN_SLP(gpd1-0, INPUT, DOWN);
 951                 PIN_SLP(gpd1-1, INPUT, DOWN);
 952                 PIN_SLP(gpd1-2, INPUT, NONE);
 953                 PIN_SLP(gpd1-3, INPUT, NONE);
 954
 955                 PIN_SLP(gpf0-0, INPUT, NONE);
 956                 PIN_SLP(gpf0-1, INPUT, NONE);
 957                 PIN_SLP(gpf0-2, INPUT, DOWN);
 958                 PIN_SLP(gpf0-3, INPUT, DOWN);
 959                 PIN_SLP(gpf0-4, INPUT, NONE);
 960                 PIN_SLP(gpf0-5, INPUT, DOWN);
 961                 PIN_SLP(gpf0-6, INPUT, NONE);
 962                 PIN_SLP(gpf0-7, INPUT, DOWN);
 963
 964                 PIN_SLP(gpf1-0, INPUT, DOWN);
 965                 PIN_SLP(gpf1-1, INPUT, DOWN);
 966                 PIN_SLP(gpf1-2, INPUT, DOWN);
 967                 PIN_SLP(gpf1-3, INPUT, DOWN);
 968                 PIN_SLP(gpf1-4, INPUT, NONE);
 969                 PIN_SLP(gpf1-5, INPUT, NONE);
 970                 PIN_SLP(gpf1-6, INPUT, DOWN);
 971                 PIN_SLP(gpf1-7, PREV, NONE);
 972
 973                 PIN_SLP(gpf2-0, PREV, NONE);
 974                 PIN_SLP(gpf2-1, INPUT, DOWN);
 975                 PIN_SLP(gpf2-2, INPUT, DOWN);
 976                 PIN_SLP(gpf2-3, INPUT, DOWN);
 977                 PIN_SLP(gpf2-4, INPUT, DOWN);
 978                 PIN_SLP(gpf2-5, INPUT, DOWN);
 979                 PIN_SLP(gpf2-6, INPUT, NONE);
 980                 PIN_SLP(gpf2-7, INPUT, NONE);
 981
 982                 PIN_SLP(gpf3-0, INPUT, NONE);
 983                 PIN_SLP(gpf3-1, PREV, NONE);
 984                 PIN_SLP(gpf3-2, PREV, NONE);
 985                 PIN_SLP(gpf3-3, PREV, NONE);
 986                 PIN_SLP(gpf3-4, OUT1, NONE);
 987                 PIN_SLP(gpf3-5, INPUT, DOWN);
 988
 989                 PIN_SLP(gpj0-0, PREV, NONE);
 990                 PIN_SLP(gpj0-1, PREV, NONE);
 991                 PIN_SLP(gpj0-2, PREV, NONE);
 992                 PIN_SLP(gpj0-3, INPUT, DOWN);
 993                 PIN_SLP(gpj0-4, PREV, NONE);
 994                 PIN_SLP(gpj0-5, PREV, NONE);
 995                 PIN_SLP(gpj0-6, INPUT, DOWN);
 996                 PIN_SLP(gpj0-7, INPUT, DOWN);
 997
 998                 PIN_SLP(gpj1-0, INPUT, DOWN);
 999                 PIN_SLP(gpj1-1, PREV, NONE);
1000                 PIN_SLP(gpj1-2, PREV, NONE);
1001                 PIN_SLP(gpj1-3, INPUT, DOWN);
1002                 PIN_SLP(gpj1-4, INPUT, DOWN);
1003         };
1004 };
1005
1006 &pinctrl_1 {
1007         pinctrl-names = "default";
1008         pinctrl-0 = <&sleep1>;
1009
1010         sleep1: sleep-states {
1011                 PIN_SLP(gpk0-0, PREV, NONE);
1012                 PIN_SLP(gpk0-1, PREV, NONE);
1013                 PIN_SLP(gpk0-2, OUT0, NONE);
1014                 PIN_SLP(gpk0-3, PREV, NONE);
1015                 PIN_SLP(gpk0-4, PREV, NONE);
1016                 PIN_SLP(gpk0-5, PREV, NONE);
1017                 PIN_SLP(gpk0-6, PREV, NONE);
1018
1019                 PIN_SLP(gpk1-0, INPUT, DOWN);
1020                 PIN_SLP(gpk1-1, INPUT, DOWN);
1021                 PIN_SLP(gpk1-2, INPUT, DOWN);
1022                 PIN_SLP(gpk1-3, PREV, NONE);
1023                 PIN_SLP(gpk1-4, PREV, NONE);
1024                 PIN_SLP(gpk1-5, PREV, NONE);
1025                 PIN_SLP(gpk1-6, PREV, NONE);
1026
1027                 PIN_SLP(gpk2-0, INPUT, DOWN);
1028                 PIN_SLP(gpk2-1, INPUT, DOWN);
1029                 PIN_SLP(gpk2-2, INPUT, DOWN);
1030                 PIN_SLP(gpk2-3, INPUT, DOWN);
1031                 PIN_SLP(gpk2-4, INPUT, DOWN);
1032                 PIN_SLP(gpk2-5, INPUT, DOWN);
1033                 PIN_SLP(gpk2-6, INPUT, DOWN);
1034
1035                 PIN_SLP(gpk3-0, OUT0, NONE);
1036                 PIN_SLP(gpk3-1, INPUT, NONE);
1037                 PIN_SLP(gpk3-2, INPUT, DOWN);
1038                 PIN_SLP(gpk3-3, INPUT, NONE);
1039                 PIN_SLP(gpk3-4, INPUT, NONE);
1040                 PIN_SLP(gpk3-5, INPUT, NONE);
1041                 PIN_SLP(gpk3-6, INPUT, NONE);
1042
1043                 PIN_SLP(gpl0-0, INPUT, DOWN);
1044                 PIN_SLP(gpl0-1, INPUT, DOWN);
1045                 PIN_SLP(gpl0-2, INPUT, DOWN);
1046                 PIN_SLP(gpl0-3, INPUT, DOWN);
1047                 PIN_SLP(gpl0-4, PREV, NONE);
1048                 PIN_SLP(gpl0-6, PREV, NONE);
1049
1050                 PIN_SLP(gpl1-0, INPUT, DOWN);
1051                 PIN_SLP(gpl1-1, INPUT, DOWN);
1052                 PIN_SLP(gpl2-0, INPUT, DOWN);
1053                 PIN_SLP(gpl2-1, INPUT, DOWN);
1054                 PIN_SLP(gpl2-2, INPUT, DOWN);
1055                 PIN_SLP(gpl2-3, INPUT, DOWN);
1056                 PIN_SLP(gpl2-4, INPUT, DOWN);
1057                 PIN_SLP(gpl2-5, INPUT, DOWN);
1058                 PIN_SLP(gpl2-6, PREV, NONE);
1059                 PIN_SLP(gpl2-7, INPUT, DOWN);
1060
1061                 PIN_SLP(gpm0-0, INPUT, DOWN);
1062                 PIN_SLP(gpm0-1, INPUT, DOWN);
1063                 PIN_SLP(gpm0-2, INPUT, DOWN);
1064                 PIN_SLP(gpm0-3, INPUT, DOWN);
1065                 PIN_SLP(gpm0-4, INPUT, DOWN);
1066                 PIN_SLP(gpm0-5, INPUT, DOWN);
1067                 PIN_SLP(gpm0-6, INPUT, DOWN);
1068                 PIN_SLP(gpm0-7, INPUT, DOWN);
1069
1070                 PIN_SLP(gpm1-0, INPUT, DOWN);
1071                 PIN_SLP(gpm1-1, INPUT, DOWN);
1072                 PIN_SLP(gpm1-2, INPUT, NONE);
1073                 PIN_SLP(gpm1-3, INPUT, NONE);
1074                 PIN_SLP(gpm1-4, INPUT, NONE);
1075                 PIN_SLP(gpm1-5, INPUT, NONE);
1076                 PIN_SLP(gpm1-6, INPUT, DOWN);
1077
1078                 PIN_SLP(gpm2-0, INPUT, NONE);
1079                 PIN_SLP(gpm2-1, INPUT, NONE);
1080                 PIN_SLP(gpm2-2, INPUT, DOWN);
1081                 PIN_SLP(gpm2-3, INPUT, DOWN);
1082                 PIN_SLP(gpm2-4, INPUT, DOWN);
1083
1084                 PIN_SLP(gpm3-0, PREV, NONE);
1085                 PIN_SLP(gpm3-1, PREV, NONE);
1086                 PIN_SLP(gpm3-2, PREV, NONE);
1087                 PIN_SLP(gpm3-3, OUT1, NONE);
1088                 PIN_SLP(gpm3-4, INPUT, DOWN);
1089                 PIN_SLP(gpm3-5, INPUT, DOWN);
1090                 PIN_SLP(gpm3-6, INPUT, DOWN);
1091                 PIN_SLP(gpm3-7, INPUT, DOWN);
1092
1093                 PIN_SLP(gpm4-0, INPUT, DOWN);
1094                 PIN_SLP(gpm4-1, INPUT, DOWN);
1095                 PIN_SLP(gpm4-2, INPUT, DOWN);
1096                 PIN_SLP(gpm4-3, INPUT, DOWN);
1097                 PIN_SLP(gpm4-4, INPUT, DOWN);
1098                 PIN_SLP(gpm4-5, INPUT, DOWN);
1099                 PIN_SLP(gpm4-6, INPUT, DOWN);
1100                 PIN_SLP(gpm4-7, INPUT, DOWN);
1101
1102                 PIN_SLP(gpy0-0, INPUT, DOWN);
1103                 PIN_SLP(gpy0-1, INPUT, DOWN);
1104                 PIN_SLP(gpy0-2, INPUT, DOWN);
1105                 PIN_SLP(gpy0-3, INPUT, DOWN);
1106                 PIN_SLP(gpy0-4, INPUT, DOWN);
1107                 PIN_SLP(gpy0-5, INPUT, DOWN);
1108
1109                 PIN_SLP(gpy1-0, INPUT, DOWN);
1110                 PIN_SLP(gpy1-1, INPUT, DOWN);
1111                 PIN_SLP(gpy1-2, INPUT, DOWN);
1112                 PIN_SLP(gpy1-3, INPUT, DOWN);
1113
1114                 PIN_SLP(gpy2-0, PREV, NONE);
1115                 PIN_SLP(gpy2-1, INPUT, DOWN);
1116                 PIN_SLP(gpy2-2, INPUT, NONE);
1117                 PIN_SLP(gpy2-3, INPUT, NONE);
1118                 PIN_SLP(gpy2-4, INPUT, NONE);
1119                 PIN_SLP(gpy2-5, INPUT, NONE);
1120
1121                 PIN_SLP(gpy3-0, INPUT, DOWN);
1122                 PIN_SLP(gpy3-1, INPUT, DOWN);
1123                 PIN_SLP(gpy3-2, INPUT, DOWN);
1124                 PIN_SLP(gpy3-3, INPUT, DOWN);
1125                 PIN_SLP(gpy3-4, INPUT, DOWN);
1126                 PIN_SLP(gpy3-5, INPUT, DOWN);
1127                 PIN_SLP(gpy3-6, INPUT, DOWN);
1128                 PIN_SLP(gpy3-7, INPUT, DOWN);
1129
1130                 PIN_SLP(gpy4-0, INPUT, DOWN);
1131                 PIN_SLP(gpy4-1, INPUT, DOWN);
1132                 PIN_SLP(gpy4-2, INPUT, DOWN);
1133                 PIN_SLP(gpy4-3, INPUT, DOWN);
1134                 PIN_SLP(gpy4-4, INPUT, DOWN);
1135                 PIN_SLP(gpy4-5, INPUT, DOWN);
1136                 PIN_SLP(gpy4-6, INPUT, DOWN);
1137                 PIN_SLP(gpy4-7, INPUT, DOWN);
1138
1139                 PIN_SLP(gpy5-0, INPUT, DOWN);
1140                 PIN_SLP(gpy5-1, INPUT, DOWN);
1141                 PIN_SLP(gpy5-2, INPUT, DOWN);
1142                 PIN_SLP(gpy5-3, INPUT, DOWN);
1143                 PIN_SLP(gpy5-4, INPUT, DOWN);
1144                 PIN_SLP(gpy5-5, INPUT, DOWN);
1145                 PIN_SLP(gpy5-6, INPUT, DOWN);
1146                 PIN_SLP(gpy5-7, INPUT, DOWN);
1147
1148                 PIN_SLP(gpy6-0, INPUT, DOWN);
1149                 PIN_SLP(gpy6-1, INPUT, DOWN);
1150                 PIN_SLP(gpy6-2, INPUT, DOWN);
1151                 PIN_SLP(gpy6-3, INPUT, DOWN);
1152                 PIN_SLP(gpy6-4, INPUT, DOWN);
1153                 PIN_SLP(gpy6-5, INPUT, DOWN);
1154                 PIN_SLP(gpy6-6, INPUT, DOWN);
1155                 PIN_SLP(gpy6-7, INPUT, DOWN);
1156         };
1157 };
1158
1159 &pinctrl_2 {
1160         pinctrl-names = "default";
1161         pinctrl-0 = <&sleep2>;
1162
1163         sleep2: sleep-states {
1164                 PIN_SLP(gpz-0, INPUT, DOWN);
1165                 PIN_SLP(gpz-1, INPUT, DOWN);
1166                 PIN_SLP(gpz-2, INPUT, DOWN);
1167                 PIN_SLP(gpz-3, INPUT, DOWN);
1168                 PIN_SLP(gpz-4, INPUT, DOWN);
1169                 PIN_SLP(gpz-5, INPUT, DOWN);
1170                 PIN_SLP(gpz-6, INPUT, DOWN);
1171         };
1172 };
1173
1174 &pinctrl_3 {
1175         pinctrl-names = "default";
1176         pinctrl-0 = <&sleep3>;
1177
1178         sleep3: sleep-states {
1179                 PIN_SLP(gpv0-0, INPUT, DOWN);
1180                 PIN_SLP(gpv0-1, INPUT, DOWN);
1181                 PIN_SLP(gpv0-2, INPUT, DOWN);
1182                 PIN_SLP(gpv0-3, INPUT, DOWN);
1183                 PIN_SLP(gpv0-4, INPUT, DOWN);
1184                 PIN_SLP(gpv0-5, INPUT, DOWN);
1185                 PIN_SLP(gpv0-6, INPUT, DOWN);
1186                 PIN_SLP(gpv0-7, INPUT, DOWN);
1187
1188                 PIN_SLP(gpv1-0, INPUT, DOWN);
1189                 PIN_SLP(gpv1-1, INPUT, DOWN);
1190                 PIN_SLP(gpv1-2, INPUT, DOWN);
1191                 PIN_SLP(gpv1-3, INPUT, DOWN);
1192                 PIN_SLP(gpv1-4, INPUT, DOWN);
1193                 PIN_SLP(gpv1-5, INPUT, DOWN);
1194                 PIN_SLP(gpv1-6, INPUT, DOWN);
1195                 PIN_SLP(gpv1-7, INPUT, DOWN);
1196
1197                 PIN_SLP(gpv2-0, INPUT, DOWN);
1198                 PIN_SLP(gpv2-1, INPUT, DOWN);
1199                 PIN_SLP(gpv2-2, INPUT, DOWN);
1200                 PIN_SLP(gpv2-3, INPUT, DOWN);
1201                 PIN_SLP(gpv2-4, INPUT, DOWN);
1202                 PIN_SLP(gpv2-5, INPUT, DOWN);
1203                 PIN_SLP(gpv2-6, INPUT, DOWN);
1204                 PIN_SLP(gpv2-7, INPUT, DOWN);
1205
1206                 PIN_SLP(gpv3-0, INPUT, DOWN);
1207                 PIN_SLP(gpv3-1, INPUT, DOWN);
1208                 PIN_SLP(gpv3-2, INPUT, DOWN);
1209                 PIN_SLP(gpv3-3, INPUT, DOWN);
1210                 PIN_SLP(gpv3-4, INPUT, DOWN);
1211                 PIN_SLP(gpv3-5, INPUT, DOWN);
1212                 PIN_SLP(gpv3-6, INPUT, DOWN);
1213                 PIN_SLP(gpv3-7, INPUT, DOWN);
1214
1215                 PIN_SLP(gpv4-0, INPUT, DOWN);
1216         };
1217 };
1218
1219 &pwm {
1220         pinctrl-0 = <&pwm0_out>;
1221         pinctrl-names = "default";
1222         samsung,pwm-outputs = <0>;
1223         status = "okay";
1224 };
1225
1226 &rtc {
1227         status = "okay";
1228         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1229         clock-names = "rtc", "rtc_src";
1230 };
1231
1232 &sdhci_2 {
1233         bus-width = <4>;
1234         cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1235         cd-inverted;
1236         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1237         pinctrl-names = "default";
1238         vmmc-supply = <&ldo21_reg>;
1239         status = "okay";
1240 };
1241
1242 &serial_0 {
1243         status = "okay";
1244 };
1245
1246 &serial_1 {
1247         status = "okay";
1248 };
1249
1250 &serial_2 {
1251         status = "okay";
1252 };
1253
1254 &serial_3 {
1255         status = "okay";
1256 };
1257
1258 &spi_1 {
1259         pinctrl-names = "default";
1260         pinctrl-0 = <&spi1_bus>;
1261         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1262         status = "okay";
1263
1264         s5c73m3_spi: s5c73m3@0 {
1265                 compatible = "samsung,s5c73m3";
1266                 spi-max-frequency = <50000000>;
1267                 reg = <0>;
1268                 controller-data {
1269                         samsung,spi-feedback-delay = <2>;
1270                 };
1271         };
1272 };
1273
1274 &tmu {
1275         vtmu-supply = <&ldo10_reg>;
1276         status = "okay";
1277 };