Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / exynos4412-trats2.dts
1 /*
2  * Samsung's Exynos4412 based Trats 2 board device tree source
3  *
4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * Device tree source file for Samsung's Trats 2 board which is based on
8  * Samsung's Exynos4412 SoC.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13 */
14
15 /dts-v1/;
16 #include "exynos4412.dtsi"
17 #include "exynos4412-ppmu-common.dtsi"
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/interrupt-controller/irq.h>
20 #include <dt-bindings/clock/maxim,max77686.h>
21
22 / {
23         model = "Samsung Trats 2 based on Exynos4412";
24         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
25
26         aliases {
27                 i2c9 = &i2c_ak8975;
28                 i2c10 = &i2c_cm36651;
29                 i2c11 = &i2c_max77693;
30                 i2c12 = &i2c_max77693_fuel;
31         };
32
33         memory {
34                 reg =  <0x40000000 0x40000000>;
35         };
36
37         chosen {
38                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
39                 stdout-path = &serial_2;
40         };
41
42         firmware@0204F000 {
43                 compatible = "samsung,secure-firmware";
44                 reg = <0x0204F000 0x1000>;
45         };
46
47         fixed-rate-clocks {
48                 xxti {
49                         compatible = "samsung,clock-xxti", "fixed-clock";
50                         clock-frequency = <0>;
51                 };
52
53                 xusbxti {
54                         compatible = "samsung,clock-xusbxti", "fixed-clock";
55                         clock-frequency = <24000000>;
56                 };
57         };
58
59         regulators {
60                 compatible = "simple-bus";
61                 #address-cells = <1>;
62                 #size-cells = <0>;
63
64                 cam_io_reg: voltage-regulator-1 {
65                         compatible = "regulator-fixed";
66                         regulator-name = "CAM_SENSOR_A";
67                         regulator-min-microvolt = <2800000>;
68                         regulator-max-microvolt = <2800000>;
69                         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
70                         enable-active-high;
71                 };
72
73                 lcd_vdd3_reg: voltage-regulator-2 {
74                         compatible = "regulator-fixed";
75                         regulator-name = "LCD_VDD_2.2V";
76                         regulator-min-microvolt = <2200000>;
77                         regulator-max-microvolt = <2200000>;
78                         gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
79                         enable-active-high;
80                 };
81
82                 cam_af_reg: voltage-regulator-3 {
83                         compatible = "regulator-fixed";
84                         regulator-name = "CAM_AF";
85                         regulator-min-microvolt = <2800000>;
86                         regulator-max-microvolt = <2800000>;
87                         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
88                         enable-active-high;
89                 };
90
91                 ps_als_reg: voltage-regulator-5 {
92                         compatible = "regulator-fixed";
93                         regulator-name = "LED_A_3.0V";
94                         regulator-min-microvolt = <3000000>;
95                         regulator-max-microvolt = <3000000>;
96                         gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
97                         enable-active-high;
98                 };
99         };
100
101         gpio-keys {
102                 compatible = "gpio-keys";
103
104                 key-down {
105                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
106                         linux,code = <114>;
107                         label = "volume down";
108                         debounce-interval = <10>;
109                 };
110
111                 key-up {
112                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
113                         linux,code = <115>;
114                         label = "volume up";
115                         debounce-interval = <10>;
116                 };
117
118                 key-power {
119                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
120                         linux,code = <116>;
121                         label = "power";
122                         debounce-interval = <10>;
123                         wakeup-source;
124                 };
125
126                 key-ok {
127                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
128                         linux,code = <139>;
129                         label = "ok";
130                         debounce-inteval = <10>;
131                         wakeup-source;
132                 };
133         };
134
135         i2c_max77693: i2c-gpio-1 {
136                 compatible = "i2c-gpio";
137                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
138                 i2c-gpio,delay-us = <2>;
139                 #address-cells = <1>;
140                 #size-cells = <0>;
141                 status = "okay";
142
143                 max77693@66 {
144                         compatible = "maxim,max77693";
145                         interrupt-parent = <&gpx1>;
146                         interrupts = <5 2>;
147                         reg = <0x66>;
148
149                         regulators {
150                                 esafeout1_reg: ESAFEOUT1 {
151                                         regulator-name = "ESAFEOUT1";
152                                 };
153                                 esafeout2_reg: ESAFEOUT2 {
154                                         regulator-name = "ESAFEOUT2";
155                                 };
156                                 charger_reg: CHARGER {
157                                         regulator-name = "CHARGER";
158                                         regulator-min-microamp = <60000>;
159                                         regulator-max-microamp = <2580000>;
160                                 };
161                         };
162
163                         max77693_haptic {
164                                 compatible = "maxim,max77693-haptic";
165                                 haptic-supply = <&ldo26_reg>;
166                                 pwms = <&pwm 0 38022 0>;
167                         };
168
169                         charger {
170                                 compatible = "maxim,max77693-charger";
171
172                                 maxim,constant-microvolt = <4350000>;
173                                 maxim,min-system-microvolt = <3600000>;
174                                 maxim,thermal-regulation-celsius = <100>;
175                                 maxim,battery-overcurrent-microamp = <3500000>;
176                                 maxim,charge-input-threshold-microvolt = <4300000>;
177                         };
178                 };
179         };
180
181         i2c_max77693_fuel: i2c-gpio-3 {
182                 compatible = "i2c-gpio";
183                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
184                 i2c-gpio,delay-us = <2>;
185                 #address-cells = <1>;
186                 #size-cells = <0>;
187                 status = "okay";
188
189                 max77693-fuel-gauge@36 {
190                         compatible = "maxim,max17047";
191                         interrupt-parent = <&gpx2>;
192                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
193                         reg = <0x36>;
194
195                         maxim,over-heat-temp = <700>;
196                         maxim,over-volt = <4500>;
197                 };
198         };
199
200         i2c_ak8975: i2c-gpio-0 {
201                 compatible = "i2c-gpio";
202                 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
203                 i2c-gpio,delay-us = <2>;
204                 #address-cells = <1>;
205                 #size-cells = <0>;
206                 status = "okay";
207
208                 ak8975@0c {
209                         compatible = "asahi-kasei,ak8975";
210                         reg = <0x0c>;
211                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
212                 };
213         };
214
215         i2c_cm36651: i2c-gpio-2 {
216                 compatible = "i2c-gpio";
217                 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
218                 i2c-gpio,delay-us = <2>;
219                 #address-cells = <1>;
220                 #size-cells = <0>;
221
222                 cm36651@18 {
223                         compatible = "capella,cm36651";
224                         reg = <0x18>;
225                         interrupt-parent = <&gpx0>;
226                         interrupts = <2 2>;
227                         vled-supply = <&ps_als_reg>;
228                 };
229         };
230
231         camera: camera {
232                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
233                 pinctrl-names = "default";
234                 status = "okay";
235                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
236                                   <&clock CLK_MOUT_CAM1>;
237                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
238                                          <&clock CLK_XUSBXTI>;
239
240
241         };
242
243         sound {
244                 compatible = "samsung,trats2-audio";
245                 samsung,i2s-controller = <&i2s0>;
246                 samsung,model = "Trats2";
247                 samsung,audio-codec = <&wm1811>;
248                 samsung,audio-routing =
249                         "SPK", "SPKOUTLN",
250                         "SPK", "SPKOUTLP",
251                         "SPK", "SPKOUTRN",
252                         "SPK", "SPKOUTRP";
253         };
254
255         thermistor-ap {
256                 compatible = "ntc,ncp15wb473";
257                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
258                 pullup-ohm = <100000>;   /* 100K */
259                 pulldown-ohm = <100000>; /* 100K */
260                 io-channels = <&adc 1>;  /* AP temperature */
261         };
262
263         thermistor-battery {
264                 compatible = "ntc,ncp15wb473";
265                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
266                 pullup-ohm = <100000>;   /* 100K */
267                 pulldown-ohm = <100000>; /* 100K */
268                 io-channels = <&adc 2>;  /* Battery temperature */
269         };
270
271         thermal-zones {
272                 cpu_thermal: cpu-thermal {
273                         cooling-maps {
274                                 map0 {
275                                      /* Corresponds to 800MHz at freq_table */
276                                      cooling-device = <&cpu0 7 7>;
277                                 };
278                                 map1 {
279                                      /* Corresponds to 200MHz at freq_table */
280                                      cooling-device = <&cpu0 13 13>;
281                                };
282                        };
283                 };
284         };
285 };
286
287 &adc {
288         vdd-supply = <&ldo3_reg>;
289         status = "okay";
290 };
291
292 &bus_dmc {
293         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
294         vdd-supply = <&buck1_reg>;
295         status = "okay";
296 };
297
298 &bus_acp {
299         devfreq = <&bus_dmc>;
300         status = "okay";
301 };
302
303 &bus_c2c {
304         devfreq = <&bus_dmc>;
305         status = "okay";
306 };
307
308 &bus_leftbus {
309         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
310         vdd-supply = <&buck3_reg>;
311         status = "okay";
312 };
313
314 &bus_rightbus {
315         devfreq = <&bus_leftbus>;
316         status = "okay";
317 };
318
319 &bus_display {
320         devfreq = <&bus_leftbus>;
321         status = "okay";
322 };
323
324 &bus_fsys {
325         devfreq = <&bus_leftbus>;
326         status = "okay";
327 };
328
329 &bus_peri {
330         devfreq = <&bus_leftbus>;
331         status = "okay";
332 };
333
334 &bus_mfc {
335         devfreq = <&bus_leftbus>;
336         status = "okay";
337 };
338
339 &cpu0 {
340         cpu0-supply = <&buck2_reg>;
341 };
342
343 &csis_0 {
344         status = "okay";
345         vddcore-supply = <&ldo8_reg>;
346         vddio-supply = <&ldo10_reg>;
347         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
348                         <&clock CLK_SCLK_CSIS0>;
349         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
350         assigned-clock-rates = <0>, <176000000>;
351
352         /* Camera C (3) MIPI CSI-2 (CSIS0) */
353         port@3 {
354                 reg = <3>;
355                 csis0_ep: endpoint {
356                         remote-endpoint = <&s5c73m3_ep>;
357                         data-lanes = <1 2 3 4>;
358                         samsung,csis-hs-settle = <12>;
359                 };
360         };
361 };
362
363 &csis_1 {
364         status = "okay";
365         vddcore-supply = <&ldo8_reg>;
366         vddio-supply = <&ldo10_reg>;
367         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
368                         <&clock CLK_SCLK_CSIS1>;
369         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
370         assigned-clock-rates = <0>, <176000000>;
371
372         /* Camera D (4) MIPI CSI-2 (CSIS1) */
373         port@4 {
374                 reg = <4>;
375                 csis1_ep: endpoint {
376                         remote-endpoint = <&is_s5k6a3_ep>;
377                         data-lanes = <1>;
378                         samsung,csis-hs-settle = <18>;
379                         samsung,csis-wclk;
380                 };
381         };
382 };
383
384 &dsi_0 {
385         vddcore-supply = <&ldo8_reg>;
386         vddio-supply = <&ldo10_reg>;
387         samsung,pll-clock-frequency = <24000000>;
388         status = "okay";
389
390         ports {
391                 #address-cells = <1>;
392                 #size-cells = <0>;
393
394                 port@1 {
395                         reg = <1>;
396
397                         dsi_out: endpoint {
398                                 remote-endpoint = <&dsi_in>;
399                                 samsung,burst-clock-frequency = <500000000>;
400                                 samsung,esc-clock-frequency = <20000000>;
401                         };
402                 };
403         };
404
405         panel@0 {
406                 compatible = "samsung,s6e8aa0";
407                 reg = <0>;
408                 vdd3-supply = <&lcd_vdd3_reg>;
409                 vci-supply = <&ldo25_reg>;
410                 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
411                 power-on-delay= <50>;
412                 reset-delay = <100>;
413                 init-delay = <100>;
414                 flip-horizontal;
415                 flip-vertical;
416                 panel-width-mm = <58>;
417                 panel-height-mm = <103>;
418
419                 display-timings {
420                         timing-0 {
421                                 clock-frequency = <57153600>;
422                                 hactive = <720>;
423                                 vactive = <1280>;
424                                 hfront-porch = <5>;
425                                 hback-porch = <5>;
426                                 hsync-len = <5>;
427                                 vfront-porch = <13>;
428                                 vback-porch = <1>;
429                                 vsync-len = <2>;
430                         };
431                 };
432
433                 port {
434                         dsi_in: endpoint {
435                                 remote-endpoint = <&dsi_out>;
436                         };
437                 };
438         };
439 };
440
441 &exynos_usbphy {
442         vbus-supply = <&esafeout1_reg>;
443         status = "okay";
444 };
445
446 &fimc_0 {
447         status = "okay";
448         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
449                         <&clock CLK_SCLK_FIMC0>;
450         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
451         assigned-clock-rates = <0>, <176000000>;
452 };
453
454 &fimc_1 {
455         status = "okay";
456         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
457                         <&clock CLK_SCLK_FIMC1>;
458         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
459         assigned-clock-rates = <0>, <176000000>;
460 };
461
462 &fimc_2 {
463         status = "okay";
464         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
465                         <&clock CLK_SCLK_FIMC2>;
466         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
467         assigned-clock-rates = <0>, <176000000>;
468 };
469
470 &fimc_3 {
471         status = "okay";
472         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
473                         <&clock CLK_SCLK_FIMC3>;
474         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
475         assigned-clock-rates = <0>, <176000000>;
476 };
477
478 &fimc_is {
479         pinctrl-0 = <&fimc_is_uart>;
480         pinctrl-names = "default";
481         status = "okay";
482
483         i2c1_isp: i2c-isp@12140000 {
484                 pinctrl-0 = <&fimc_is_i2c1>;
485                 pinctrl-names = "default";
486
487                 s5k6a3@10 {
488                         compatible = "samsung,s5k6a3";
489                         reg = <0x10>;
490                         svdda-supply = <&cam_io_reg>;
491                         svddio-supply = <&ldo19_reg>;
492                         afvdd-supply = <&ldo19_reg>;
493                         clock-frequency = <24000000>;
494                         /* CAM_B_CLKOUT */
495                         clocks = <&camera 1>;
496                         clock-names = "extclk";
497                         samsung,camclk-out = <1>;
498                         gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
499
500                         port {
501                                 is_s5k6a3_ep: endpoint {
502                                         remote-endpoint = <&csis1_ep>;
503                                         data-lanes = <1>;
504                                 };
505                         };
506                 };
507         };
508 };
509
510 &fimc_lite_0 {
511         status = "okay";
512 };
513
514 &fimc_lite_1 {
515         status = "okay";
516 };
517
518 &fimd {
519         status = "okay";
520 };
521
522 &hsotg {
523         vusb_d-supply = <&ldo15_reg>;
524         vusb_a-supply = <&ldo12_reg>;
525         dr_mode = "peripheral";
526         status = "okay";
527 };
528
529 &i2c_0 {
530         samsung,i2c-sda-delay = <100>;
531         samsung,i2c-slave-addr = <0x10>;
532         samsung,i2c-max-bus-freq = <400000>;
533         pinctrl-0 = <&i2c0_bus>;
534         pinctrl-names = "default";
535         status = "okay";
536
537         s5c73m3@3c {
538                 compatible = "samsung,s5c73m3";
539                 reg = <0x3c>;
540                 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
541                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
542                 vdd-int-supply = <&buck9_reg>;
543                 vddio-cis-supply = <&ldo9_reg>;
544                 vdda-supply = <&ldo17_reg>;
545                 vddio-host-supply = <&ldo18_reg>;
546                 vdd-af-supply = <&cam_af_reg>;
547                 vdd-reg-supply = <&cam_io_reg>;
548                 clock-frequency = <24000000>;
549                 /* CAM_A_CLKOUT */
550                 clocks = <&camera 0>;
551                 clock-names = "cis_extclk";
552                 port {
553                         s5c73m3_ep: endpoint {
554                                 remote-endpoint = <&csis0_ep>;
555                                 data-lanes = <1 2 3 4>;
556                         };
557                 };
558         };
559 };
560
561 &i2c_3 {
562         samsung,i2c-sda-delay = <100>;
563         samsung,i2c-slave-addr = <0x10>;
564         samsung,i2c-max-bus-freq = <400000>;
565         pinctrl-0 = <&i2c3_bus>;
566         pinctrl-names = "default";
567         status = "okay";
568
569         mms114-touchscreen@48 {
570                 compatible = "melfas,mms114";
571                 reg = <0x48>;
572                 interrupt-parent = <&gpm2>;
573                 interrupts = <3 2>;
574                 x-size = <720>;
575                 y-size = <1280>;
576                 avdd-supply = <&ldo23_reg>;
577                 vdd-supply = <&ldo24_reg>;
578         };
579 };
580
581 &i2c_4 {
582         samsung,i2c-sda-delay = <100>;
583         samsung,i2c-slave-addr = <0x10>;
584         samsung,i2c-max-bus-freq = <100000>;
585         pinctrl-0 = <&i2c4_bus>;
586         pinctrl-names = "default";
587         status = "okay";
588
589         wm1811: wm1811@1a {
590                 compatible = "wlf,wm1811";
591                 reg = <0x1a>;
592                 clocks = <&pmu_system_controller 0>;
593                 clock-names = "MCLK1";
594                 DCVDD-supply = <&ldo3_reg>;
595                 DBVDD1-supply = <&ldo3_reg>;
596                 wlf,ldo1ena = <&gpj0 4 0>;
597         };
598 };
599
600 &i2c_7 {
601         samsung,i2c-sda-delay = <100>;
602         samsung,i2c-slave-addr = <0x10>;
603         samsung,i2c-max-bus-freq = <100000>;
604         pinctrl-0 = <&i2c7_bus>;
605         pinctrl-names = "default";
606         status = "okay";
607
608         max77686: max77686_pmic@09 {
609                 compatible = "maxim,max77686";
610                 interrupt-parent = <&gpx0>;
611                 interrupts = <7 0>;
612                 reg = <0x09>;
613                 #clock-cells = <1>;
614
615                 voltage-regulators {
616                         ldo1_reg: LDO1 {
617                                 regulator-name = "VALIVE_1.0V_AP";
618                                 regulator-min-microvolt = <1000000>;
619                                 regulator-max-microvolt = <1000000>;
620                                 regulator-always-on;
621                         };
622
623                         ldo2_reg: LDO2 {
624                                 regulator-name = "VM1M2_1.2V_AP";
625                                 regulator-min-microvolt = <1200000>;
626                                 regulator-max-microvolt = <1200000>;
627                                 regulator-always-on;
628                                 regulator-state-mem {
629                                         regulator-on-in-suspend;
630                                 };
631                         };
632
633                         ldo3_reg: LDO3 {
634                                 regulator-name = "VCC_1.8V_AP";
635                                 regulator-min-microvolt = <1800000>;
636                                 regulator-max-microvolt = <1800000>;
637                                 regulator-always-on;
638                         };
639
640                         ldo4_reg: LDO4 {
641                                 regulator-name = "VCC_2.8V_AP";
642                                 regulator-min-microvolt = <2800000>;
643                                 regulator-max-microvolt = <2800000>;
644                                 regulator-always-on;
645                         };
646
647                         ldo5_reg: LDO5 {
648                                 regulator-name = "VCC_1.8V_IO";
649                                 regulator-min-microvolt = <1800000>;
650                                 regulator-max-microvolt = <1800000>;
651                                 regulator-always-on;
652                         };
653
654                         ldo6_reg: LDO6 {
655                                 regulator-name = "VMPLL_1.0V_AP";
656                                 regulator-min-microvolt = <1000000>;
657                                 regulator-max-microvolt = <1000000>;
658                                 regulator-always-on;
659                                 regulator-state-mem {
660                                         regulator-on-in-suspend;
661                                 };
662                         };
663
664                         ldo7_reg: LDO7 {
665                                 regulator-name = "VPLL_1.0V_AP";
666                                 regulator-min-microvolt = <1000000>;
667                                 regulator-max-microvolt = <1000000>;
668                                 regulator-always-on;
669                                 regulator-state-mem {
670                                         regulator-on-in-suspend;
671                                 };
672                         };
673
674                         ldo8_reg: LDO8 {
675                                 regulator-name = "VMIPI_1.0V";
676                                 regulator-min-microvolt = <1000000>;
677                                 regulator-max-microvolt = <1000000>;
678                                 regulator-state-mem {
679                                         regulator-off-in-suspend;
680                                 };
681                         };
682
683                         ldo9_reg: LDO9 {
684                                 regulator-name = "CAM_ISP_MIPI_1.2V";
685                                 regulator-min-microvolt = <1200000>;
686                                 regulator-max-microvolt = <1200000>;
687                         };
688
689                         ldo10_reg: LDO10 {
690                                 regulator-name = "VMIPI_1.8V";
691                                 regulator-min-microvolt = <1800000>;
692                                 regulator-max-microvolt = <1800000>;
693                                 regulator-state-mem {
694                                         regulator-off-in-suspend;
695                                 };
696                         };
697
698                         ldo11_reg: LDO11 {
699                                 regulator-name = "VABB1_1.95V";
700                                 regulator-min-microvolt = <1950000>;
701                                 regulator-max-microvolt = <1950000>;
702                                 regulator-always-on;
703                                 regulator-state-mem {
704                                         regulator-off-in-suspend;
705                                 };
706                         };
707
708                         ldo12_reg: LDO12 {
709                                 regulator-name = "VUOTG_3.0V";
710                                 regulator-min-microvolt = <3000000>;
711                                 regulator-max-microvolt = <3000000>;
712                                 regulator-state-mem {
713                                         regulator-off-in-suspend;
714                                 };
715                         };
716
717                         ldo13_reg: LDO13 {
718                                 regulator-name = "NFC_AVDD_1.8V";
719                                 regulator-min-microvolt = <1800000>;
720                                 regulator-max-microvolt = <1800000>;
721                         };
722
723                         ldo14_reg: LDO14 {
724                                 regulator-name = "VABB2_1.95V";
725                                 regulator-min-microvolt = <1950000>;
726                                 regulator-max-microvolt = <1950000>;
727                                 regulator-always-on;
728                                 regulator-state-mem {
729                                         regulator-off-in-suspend;
730                                 };
731                         };
732
733                         ldo15_reg: LDO15 {
734                                 regulator-name = "VHSIC_1.0V";
735                                 regulator-min-microvolt = <1000000>;
736                                 regulator-max-microvolt = <1000000>;
737                                 regulator-state-mem {
738                                         regulator-on-in-suspend;
739                                 };
740                         };
741
742                         ldo16_reg: LDO16 {
743                                 regulator-name = "VHSIC_1.8V";
744                                 regulator-min-microvolt = <1800000>;
745                                 regulator-max-microvolt = <1800000>;
746                                 regulator-state-mem {
747                                         regulator-on-in-suspend;
748                                 };
749                         };
750
751                         ldo17_reg: LDO17 {
752                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
753                                 regulator-min-microvolt = <1200000>;
754                                 regulator-max-microvolt = <1200000>;
755                         };
756
757                         ldo18_reg: LDO18 {
758                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
759                                 regulator-min-microvolt = <1800000>;
760                                 regulator-max-microvolt = <1800000>;
761                         };
762
763                         ldo19_reg: LDO19 {
764                                 regulator-name = "VT_CAM_1.8V";
765                                 regulator-min-microvolt = <1800000>;
766                                 regulator-max-microvolt = <1800000>;
767                         };
768
769                         ldo20_reg: LDO20 {
770                                 regulator-name = "VDDQ_PRE_1.8V";
771                                 regulator-min-microvolt = <1800000>;
772                                 regulator-max-microvolt = <1800000>;
773                         };
774
775                         ldo21_reg: LDO21 {
776                                 regulator-name = "VTF_2.8V";
777                                 regulator-min-microvolt = <2800000>;
778                                 regulator-max-microvolt = <2800000>;
779                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
780                         };
781
782                         ldo22_reg: LDO22 {
783                                 regulator-name = "VMEM_VDD_2.8V";
784                                 regulator-min-microvolt = <2800000>;
785                                 regulator-max-microvolt = <2800000>;
786                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
787                         };
788
789                         ldo23_reg: LDO23 {
790                                 regulator-name = "TSP_AVDD_3.3V";
791                                 regulator-min-microvolt = <3300000>;
792                                 regulator-max-microvolt = <3300000>;
793                         };
794
795                         ldo24_reg: LDO24 {
796                                 regulator-name = "TSP_VDD_1.8V";
797                                 regulator-min-microvolt = <1800000>;
798                                 regulator-max-microvolt = <1800000>;
799                         };
800
801                         ldo25_reg: LDO25 {
802                                 regulator-name = "LCD_VCC_3.3V";
803                                 regulator-min-microvolt = <2800000>;
804                                 regulator-max-microvolt = <2800000>;
805                         };
806
807                         ldo26_reg: LDO26 {
808                                 regulator-name = "MOTOR_VCC_3.0V";
809                                 regulator-min-microvolt = <3000000>;
810                                 regulator-max-microvolt = <3000000>;
811                         };
812
813                         buck1_reg: BUCK1 {
814                                 regulator-name = "vdd_mif";
815                                 regulator-min-microvolt = <850000>;
816                                 regulator-max-microvolt = <1100000>;
817                                 regulator-always-on;
818                                 regulator-boot-on;
819                                 regulator-state-mem {
820                                         regulator-off-in-suspend;
821                                 };
822                         };
823
824                         buck2_reg: BUCK2 {
825                                 regulator-name = "vdd_arm";
826                                 regulator-min-microvolt = <850000>;
827                                 regulator-max-microvolt = <1500000>;
828                                 regulator-always-on;
829                                 regulator-boot-on;
830                                 regulator-state-mem {
831                                         regulator-on-in-suspend;
832                                 };
833                         };
834
835                         buck3_reg: BUCK3 {
836                                 regulator-name = "vdd_int";
837                                 regulator-min-microvolt = <850000>;
838                                 regulator-max-microvolt = <1150000>;
839                                 regulator-always-on;
840                                 regulator-boot-on;
841                                 regulator-state-mem {
842                                         regulator-off-in-suspend;
843                                 };
844                         };
845
846                         buck4_reg: BUCK4 {
847                                 regulator-name = "vdd_g3d";
848                                 regulator-min-microvolt = <850000>;
849                                 regulator-max-microvolt = <1150000>;
850                                 regulator-boot-on;
851                                 regulator-state-mem {
852                                         regulator-off-in-suspend;
853                                 };
854                         };
855
856                         buck5_reg: BUCK5 {
857                                 regulator-name = "VMEM_1.2V_AP";
858                                 regulator-min-microvolt = <1200000>;
859                                 regulator-max-microvolt = <1200000>;
860                                 regulator-always-on;
861                         };
862
863                         buck6_reg: BUCK6 {
864                                 regulator-name = "VCC_SUB_1.35V";
865                                 regulator-min-microvolt = <1350000>;
866                                 regulator-max-microvolt = <1350000>;
867                                 regulator-always-on;
868                         };
869
870                         buck7_reg: BUCK7 {
871                                 regulator-name = "VCC_SUB_2.0V";
872                                 regulator-min-microvolt = <2000000>;
873                                 regulator-max-microvolt = <2000000>;
874                                 regulator-always-on;
875                         };
876
877                         buck8_reg: BUCK8 {
878                                 regulator-name = "VMEM_VDDF_3.0V";
879                                 regulator-min-microvolt = <2850000>;
880                                 regulator-max-microvolt = <2850000>;
881                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
882                         };
883
884                         buck9_reg: BUCK9 {
885                                 regulator-name = "CAM_ISP_CORE_1.2V";
886                                 regulator-min-microvolt = <1000000>;
887                                 regulator-max-microvolt = <1200000>;
888                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
889                         };
890                 };
891         };
892 };
893
894 &i2s0 {
895         pinctrl-0 = <&i2s0_bus>;
896         pinctrl-names = "default";
897         status = "okay";
898 };
899
900 &mshc_0 {
901         num-slots = <1>;
902         broken-cd;
903         non-removable;
904         card-detect-delay = <200>;
905         vmmc-supply = <&ldo22_reg>;
906         clock-frequency = <400000000>;
907         samsung,dw-mshc-ciu-div = <0>;
908         samsung,dw-mshc-sdr-timing = <2 3>;
909         samsung,dw-mshc-ddr-timing = <1 2>;
910         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
911         pinctrl-names = "default";
912         status = "okay";
913         bus-width = <8>;
914         cap-mmc-highspeed;
915 };
916
917 &pmu_system_controller {
918         assigned-clocks = <&pmu_system_controller 0>;
919         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
920 };
921
922 &pinctrl_0 {
923         pinctrl-names = "default";
924         pinctrl-0 = <&sleep0>;
925
926         sleep0: sleep-states {
927                 PIN_SLP(gpa0-0, INPUT, NONE);
928                 PIN_SLP(gpa0-1, OUT0, NONE);
929                 PIN_SLP(gpa0-2, INPUT, NONE);
930                 PIN_SLP(gpa0-3, INPUT, UP);
931                 PIN_SLP(gpa0-4, INPUT, NONE);
932                 PIN_SLP(gpa0-5, INPUT, DOWN);
933                 PIN_SLP(gpa0-6, INPUT, DOWN);
934                 PIN_SLP(gpa0-7, INPUT, UP);
935
936                 PIN_SLP(gpa1-0, INPUT, DOWN);
937                 PIN_SLP(gpa1-1, INPUT, DOWN);
938                 PIN_SLP(gpa1-2, INPUT, DOWN);
939                 PIN_SLP(gpa1-3, INPUT, DOWN);
940                 PIN_SLP(gpa1-4, INPUT, DOWN);
941                 PIN_SLP(gpa1-5, INPUT, DOWN);
942
943                 PIN_SLP(gpb-0, INPUT, NONE);
944                 PIN_SLP(gpb-1, INPUT, NONE);
945                 PIN_SLP(gpb-2, INPUT, NONE);
946                 PIN_SLP(gpb-3, INPUT, NONE);
947                 PIN_SLP(gpb-4, INPUT, DOWN);
948                 PIN_SLP(gpb-5, INPUT, UP);
949                 PIN_SLP(gpb-6, INPUT, DOWN);
950                 PIN_SLP(gpb-7, INPUT, DOWN);
951
952                 PIN_SLP(gpc0-0, INPUT, DOWN);
953                 PIN_SLP(gpc0-1, INPUT, DOWN);
954                 PIN_SLP(gpc0-2, INPUT, DOWN);
955                 PIN_SLP(gpc0-3, INPUT, DOWN);
956                 PIN_SLP(gpc0-4, INPUT, DOWN);
957
958                 PIN_SLP(gpc1-0, INPUT, NONE);
959                 PIN_SLP(gpc1-1, PREV, NONE);
960                 PIN_SLP(gpc1-2, INPUT, NONE);
961                 PIN_SLP(gpc1-3, INPUT, NONE);
962                 PIN_SLP(gpc1-4, INPUT, NONE);
963
964                 PIN_SLP(gpd0-0, INPUT, DOWN);
965                 PIN_SLP(gpd0-1, INPUT, DOWN);
966                 PIN_SLP(gpd0-2, INPUT, NONE);
967                 PIN_SLP(gpd0-3, INPUT, NONE);
968
969                 PIN_SLP(gpd1-0, INPUT, DOWN);
970                 PIN_SLP(gpd1-1, INPUT, DOWN);
971                 PIN_SLP(gpd1-2, INPUT, NONE);
972                 PIN_SLP(gpd1-3, INPUT, NONE);
973
974                 PIN_SLP(gpf0-0, INPUT, NONE);
975                 PIN_SLP(gpf0-1, INPUT, NONE);
976                 PIN_SLP(gpf0-2, INPUT, DOWN);
977                 PIN_SLP(gpf0-3, INPUT, DOWN);
978                 PIN_SLP(gpf0-4, INPUT, NONE);
979                 PIN_SLP(gpf0-5, INPUT, DOWN);
980                 PIN_SLP(gpf0-6, INPUT, NONE);
981                 PIN_SLP(gpf0-7, INPUT, DOWN);
982
983                 PIN_SLP(gpf1-0, INPUT, DOWN);
984                 PIN_SLP(gpf1-1, INPUT, DOWN);
985                 PIN_SLP(gpf1-2, INPUT, DOWN);
986                 PIN_SLP(gpf1-3, INPUT, DOWN);
987                 PIN_SLP(gpf1-4, INPUT, NONE);
988                 PIN_SLP(gpf1-5, INPUT, NONE);
989                 PIN_SLP(gpf1-6, INPUT, DOWN);
990                 PIN_SLP(gpf1-7, PREV, NONE);
991
992                 PIN_SLP(gpf2-0, PREV, NONE);
993                 PIN_SLP(gpf2-1, INPUT, DOWN);
994                 PIN_SLP(gpf2-2, INPUT, DOWN);
995                 PIN_SLP(gpf2-3, INPUT, DOWN);
996                 PIN_SLP(gpf2-4, INPUT, DOWN);
997                 PIN_SLP(gpf2-5, INPUT, DOWN);
998                 PIN_SLP(gpf2-6, INPUT, NONE);
999                 PIN_SLP(gpf2-7, INPUT, NONE);
1000
1001                 PIN_SLP(gpf3-0, INPUT, NONE);
1002                 PIN_SLP(gpf3-1, PREV, NONE);
1003                 PIN_SLP(gpf3-2, PREV, NONE);
1004                 PIN_SLP(gpf3-3, PREV, NONE);
1005                 PIN_SLP(gpf3-4, OUT1, NONE);
1006                 PIN_SLP(gpf3-5, INPUT, DOWN);
1007
1008                 PIN_SLP(gpj0-0, PREV, NONE);
1009                 PIN_SLP(gpj0-1, PREV, NONE);
1010                 PIN_SLP(gpj0-2, PREV, NONE);
1011                 PIN_SLP(gpj0-3, INPUT, DOWN);
1012                 PIN_SLP(gpj0-4, PREV, NONE);
1013                 PIN_SLP(gpj0-5, PREV, NONE);
1014                 PIN_SLP(gpj0-6, INPUT, DOWN);
1015                 PIN_SLP(gpj0-7, INPUT, DOWN);
1016
1017                 PIN_SLP(gpj1-0, INPUT, DOWN);
1018                 PIN_SLP(gpj1-1, PREV, NONE);
1019                 PIN_SLP(gpj1-2, PREV, NONE);
1020                 PIN_SLP(gpj1-3, INPUT, DOWN);
1021                 PIN_SLP(gpj1-4, INPUT, DOWN);
1022         };
1023 };
1024
1025 &pinctrl_1 {
1026         pinctrl-names = "default";
1027         pinctrl-0 = <&sleep1>;
1028
1029         sleep1: sleep-states {
1030                 PIN_SLP(gpk0-0, PREV, NONE);
1031                 PIN_SLP(gpk0-1, PREV, NONE);
1032                 PIN_SLP(gpk0-2, OUT0, NONE);
1033                 PIN_SLP(gpk0-3, PREV, NONE);
1034                 PIN_SLP(gpk0-4, PREV, NONE);
1035                 PIN_SLP(gpk0-5, PREV, NONE);
1036                 PIN_SLP(gpk0-6, PREV, NONE);
1037
1038                 PIN_SLP(gpk1-0, INPUT, DOWN);
1039                 PIN_SLP(gpk1-1, INPUT, DOWN);
1040                 PIN_SLP(gpk1-2, INPUT, DOWN);
1041                 PIN_SLP(gpk1-3, PREV, NONE);
1042                 PIN_SLP(gpk1-4, PREV, NONE);
1043                 PIN_SLP(gpk1-5, PREV, NONE);
1044                 PIN_SLP(gpk1-6, PREV, NONE);
1045
1046                 PIN_SLP(gpk2-0, INPUT, DOWN);
1047                 PIN_SLP(gpk2-1, INPUT, DOWN);
1048                 PIN_SLP(gpk2-2, INPUT, DOWN);
1049                 PIN_SLP(gpk2-3, INPUT, DOWN);
1050                 PIN_SLP(gpk2-4, INPUT, DOWN);
1051                 PIN_SLP(gpk2-5, INPUT, DOWN);
1052                 PIN_SLP(gpk2-6, INPUT, DOWN);
1053
1054                 PIN_SLP(gpk3-0, OUT0, NONE);
1055                 PIN_SLP(gpk3-1, INPUT, NONE);
1056                 PIN_SLP(gpk3-2, INPUT, DOWN);
1057                 PIN_SLP(gpk3-3, INPUT, NONE);
1058                 PIN_SLP(gpk3-4, INPUT, NONE);
1059                 PIN_SLP(gpk3-5, INPUT, NONE);
1060                 PIN_SLP(gpk3-6, INPUT, NONE);
1061
1062                 PIN_SLP(gpl0-0, INPUT, DOWN);
1063                 PIN_SLP(gpl0-1, INPUT, DOWN);
1064                 PIN_SLP(gpl0-2, INPUT, DOWN);
1065                 PIN_SLP(gpl0-3, INPUT, DOWN);
1066                 PIN_SLP(gpl0-4, PREV, NONE);
1067                 PIN_SLP(gpl0-6, PREV, NONE);
1068
1069                 PIN_SLP(gpl1-0, INPUT, DOWN);
1070                 PIN_SLP(gpl1-1, INPUT, DOWN);
1071                 PIN_SLP(gpl2-0, INPUT, DOWN);
1072                 PIN_SLP(gpl2-1, INPUT, DOWN);
1073                 PIN_SLP(gpl2-2, INPUT, DOWN);
1074                 PIN_SLP(gpl2-3, INPUT, DOWN);
1075                 PIN_SLP(gpl2-4, INPUT, DOWN);
1076                 PIN_SLP(gpl2-5, INPUT, DOWN);
1077                 PIN_SLP(gpl2-6, PREV, NONE);
1078                 PIN_SLP(gpl2-7, INPUT, DOWN);
1079
1080                 PIN_SLP(gpm0-0, INPUT, DOWN);
1081                 PIN_SLP(gpm0-1, INPUT, DOWN);
1082                 PIN_SLP(gpm0-2, INPUT, DOWN);
1083                 PIN_SLP(gpm0-3, INPUT, DOWN);
1084                 PIN_SLP(gpm0-4, INPUT, DOWN);
1085                 PIN_SLP(gpm0-5, INPUT, DOWN);
1086                 PIN_SLP(gpm0-6, INPUT, DOWN);
1087                 PIN_SLP(gpm0-7, INPUT, DOWN);
1088
1089                 PIN_SLP(gpm1-0, INPUT, DOWN);
1090                 PIN_SLP(gpm1-1, INPUT, DOWN);
1091                 PIN_SLP(gpm1-2, INPUT, NONE);
1092                 PIN_SLP(gpm1-3, INPUT, NONE);
1093                 PIN_SLP(gpm1-4, INPUT, NONE);
1094                 PIN_SLP(gpm1-5, INPUT, NONE);
1095                 PIN_SLP(gpm1-6, INPUT, DOWN);
1096
1097                 PIN_SLP(gpm2-0, INPUT, NONE);
1098                 PIN_SLP(gpm2-1, INPUT, NONE);
1099                 PIN_SLP(gpm2-2, INPUT, DOWN);
1100                 PIN_SLP(gpm2-3, INPUT, DOWN);
1101                 PIN_SLP(gpm2-4, INPUT, DOWN);
1102
1103                 PIN_SLP(gpm3-0, PREV, NONE);
1104                 PIN_SLP(gpm3-1, PREV, NONE);
1105                 PIN_SLP(gpm3-2, PREV, NONE);
1106                 PIN_SLP(gpm3-3, OUT1, NONE);
1107                 PIN_SLP(gpm3-4, INPUT, DOWN);
1108                 PIN_SLP(gpm3-5, INPUT, DOWN);
1109                 PIN_SLP(gpm3-6, INPUT, DOWN);
1110                 PIN_SLP(gpm3-7, INPUT, DOWN);
1111
1112                 PIN_SLP(gpm4-0, INPUT, DOWN);
1113                 PIN_SLP(gpm4-1, INPUT, DOWN);
1114                 PIN_SLP(gpm4-2, INPUT, DOWN);
1115                 PIN_SLP(gpm4-3, INPUT, DOWN);
1116                 PIN_SLP(gpm4-4, INPUT, DOWN);
1117                 PIN_SLP(gpm4-5, INPUT, DOWN);
1118                 PIN_SLP(gpm4-6, INPUT, DOWN);
1119                 PIN_SLP(gpm4-7, INPUT, DOWN);
1120
1121                 PIN_SLP(gpy0-0, INPUT, DOWN);
1122                 PIN_SLP(gpy0-1, INPUT, DOWN);
1123                 PIN_SLP(gpy0-2, INPUT, DOWN);
1124                 PIN_SLP(gpy0-3, INPUT, DOWN);
1125                 PIN_SLP(gpy0-4, INPUT, DOWN);
1126                 PIN_SLP(gpy0-5, INPUT, DOWN);
1127
1128                 PIN_SLP(gpy1-0, INPUT, DOWN);
1129                 PIN_SLP(gpy1-1, INPUT, DOWN);
1130                 PIN_SLP(gpy1-2, INPUT, DOWN);
1131                 PIN_SLP(gpy1-3, INPUT, DOWN);
1132
1133                 PIN_SLP(gpy2-0, PREV, NONE);
1134                 PIN_SLP(gpy2-1, INPUT, DOWN);
1135                 PIN_SLP(gpy2-2, INPUT, NONE);
1136                 PIN_SLP(gpy2-3, INPUT, NONE);
1137                 PIN_SLP(gpy2-4, INPUT, NONE);
1138                 PIN_SLP(gpy2-5, INPUT, NONE);
1139
1140                 PIN_SLP(gpy3-0, INPUT, DOWN);
1141                 PIN_SLP(gpy3-1, INPUT, DOWN);
1142                 PIN_SLP(gpy3-2, INPUT, DOWN);
1143                 PIN_SLP(gpy3-3, INPUT, DOWN);
1144                 PIN_SLP(gpy3-4, INPUT, DOWN);
1145                 PIN_SLP(gpy3-5, INPUT, DOWN);
1146                 PIN_SLP(gpy3-6, INPUT, DOWN);
1147                 PIN_SLP(gpy3-7, INPUT, DOWN);
1148
1149                 PIN_SLP(gpy4-0, INPUT, DOWN);
1150                 PIN_SLP(gpy4-1, INPUT, DOWN);
1151                 PIN_SLP(gpy4-2, INPUT, DOWN);
1152                 PIN_SLP(gpy4-3, INPUT, DOWN);
1153                 PIN_SLP(gpy4-4, INPUT, DOWN);
1154                 PIN_SLP(gpy4-5, INPUT, DOWN);
1155                 PIN_SLP(gpy4-6, INPUT, DOWN);
1156                 PIN_SLP(gpy4-7, INPUT, DOWN);
1157
1158                 PIN_SLP(gpy5-0, INPUT, DOWN);
1159                 PIN_SLP(gpy5-1, INPUT, DOWN);
1160                 PIN_SLP(gpy5-2, INPUT, DOWN);
1161                 PIN_SLP(gpy5-3, INPUT, DOWN);
1162                 PIN_SLP(gpy5-4, INPUT, DOWN);
1163                 PIN_SLP(gpy5-5, INPUT, DOWN);
1164                 PIN_SLP(gpy5-6, INPUT, DOWN);
1165                 PIN_SLP(gpy5-7, INPUT, DOWN);
1166
1167                 PIN_SLP(gpy6-0, INPUT, DOWN);
1168                 PIN_SLP(gpy6-1, INPUT, DOWN);
1169                 PIN_SLP(gpy6-2, INPUT, DOWN);
1170                 PIN_SLP(gpy6-3, INPUT, DOWN);
1171                 PIN_SLP(gpy6-4, INPUT, DOWN);
1172                 PIN_SLP(gpy6-5, INPUT, DOWN);
1173                 PIN_SLP(gpy6-6, INPUT, DOWN);
1174                 PIN_SLP(gpy6-7, INPUT, DOWN);
1175         };
1176 };
1177
1178 &pinctrl_2 {
1179         pinctrl-names = "default";
1180         pinctrl-0 = <&sleep2>;
1181
1182         sleep2: sleep-states {
1183                 PIN_SLP(gpz-0, INPUT, DOWN);
1184                 PIN_SLP(gpz-1, INPUT, DOWN);
1185                 PIN_SLP(gpz-2, INPUT, DOWN);
1186                 PIN_SLP(gpz-3, INPUT, DOWN);
1187                 PIN_SLP(gpz-4, INPUT, DOWN);
1188                 PIN_SLP(gpz-5, INPUT, DOWN);
1189                 PIN_SLP(gpz-6, INPUT, DOWN);
1190         };
1191 };
1192
1193 &pinctrl_3 {
1194         pinctrl-names = "default";
1195         pinctrl-0 = <&sleep3>;
1196
1197         sleep3: sleep-states {
1198                 PIN_SLP(gpv0-0, INPUT, DOWN);
1199                 PIN_SLP(gpv0-1, INPUT, DOWN);
1200                 PIN_SLP(gpv0-2, INPUT, DOWN);
1201                 PIN_SLP(gpv0-3, INPUT, DOWN);
1202                 PIN_SLP(gpv0-4, INPUT, DOWN);
1203                 PIN_SLP(gpv0-5, INPUT, DOWN);
1204                 PIN_SLP(gpv0-6, INPUT, DOWN);
1205                 PIN_SLP(gpv0-7, INPUT, DOWN);
1206
1207                 PIN_SLP(gpv1-0, INPUT, DOWN);
1208                 PIN_SLP(gpv1-1, INPUT, DOWN);
1209                 PIN_SLP(gpv1-2, INPUT, DOWN);
1210                 PIN_SLP(gpv1-3, INPUT, DOWN);
1211                 PIN_SLP(gpv1-4, INPUT, DOWN);
1212                 PIN_SLP(gpv1-5, INPUT, DOWN);
1213                 PIN_SLP(gpv1-6, INPUT, DOWN);
1214                 PIN_SLP(gpv1-7, INPUT, DOWN);
1215
1216                 PIN_SLP(gpv2-0, INPUT, DOWN);
1217                 PIN_SLP(gpv2-1, INPUT, DOWN);
1218                 PIN_SLP(gpv2-2, INPUT, DOWN);
1219                 PIN_SLP(gpv2-3, INPUT, DOWN);
1220                 PIN_SLP(gpv2-4, INPUT, DOWN);
1221                 PIN_SLP(gpv2-5, INPUT, DOWN);
1222                 PIN_SLP(gpv2-6, INPUT, DOWN);
1223                 PIN_SLP(gpv2-7, INPUT, DOWN);
1224
1225                 PIN_SLP(gpv3-0, INPUT, DOWN);
1226                 PIN_SLP(gpv3-1, INPUT, DOWN);
1227                 PIN_SLP(gpv3-2, INPUT, DOWN);
1228                 PIN_SLP(gpv3-3, INPUT, DOWN);
1229                 PIN_SLP(gpv3-4, INPUT, DOWN);
1230                 PIN_SLP(gpv3-5, INPUT, DOWN);
1231                 PIN_SLP(gpv3-6, INPUT, DOWN);
1232                 PIN_SLP(gpv3-7, INPUT, DOWN);
1233
1234                 PIN_SLP(gpv4-0, INPUT, DOWN);
1235         };
1236 };
1237
1238 &pwm {
1239         pinctrl-0 = <&pwm0_out>;
1240         pinctrl-names = "default";
1241         samsung,pwm-outputs = <0>;
1242         status = "okay";
1243 };
1244
1245 &rtc {
1246         status = "okay";
1247         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1248         clock-names = "rtc", "rtc_src";
1249 };
1250
1251 &sdhci_2 {
1252         bus-width = <4>;
1253         cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1254         cd-inverted;
1255         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1256         pinctrl-names = "default";
1257         vmmc-supply = <&ldo21_reg>;
1258         status = "okay";
1259 };
1260
1261 &serial_0 {
1262         status = "okay";
1263 };
1264
1265 &serial_1 {
1266         status = "okay";
1267 };
1268
1269 &serial_2 {
1270         status = "okay";
1271 };
1272
1273 &serial_3 {
1274         status = "okay";
1275 };
1276
1277 &spi_1 {
1278         pinctrl-names = "default";
1279         pinctrl-0 = <&spi1_bus>;
1280         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1281         status = "okay";
1282
1283         s5c73m3_spi: s5c73m3@0 {
1284                 compatible = "samsung,s5c73m3";
1285                 spi-max-frequency = <50000000>;
1286                 reg = <0>;
1287                 controller-data {
1288                         samsung,spi-feedback-delay = <2>;
1289                 };
1290         };
1291 };
1292
1293 &tmu {
1294         vtmu-supply = <&ldo10_reg>;
1295         status = "okay";
1296 };