arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include "exynos4412-ppmu-common.dtsi"
  18 #include <dt-bindings/gpio/gpio.h>
  19 #include <dt-bindings/interrupt-controller/irq.h>
  20 #include <dt-bindings/clock/maxim,max77686.h>
  21 #include <dt-bindings/pinctrl/samsung.h>
  22
  23 / {
  24         model = "Samsung Trats 2 based on Exynos4412";
  25         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  26
  27         aliases {
  28                 i2c9 = &i2c_ak8975;
  29                 i2c10 = &i2c_cm36651;
  30                 i2c11 = &i2c_max77693;
  31                 i2c12 = &i2c_max77693_fuel;
  32         };
  33
  34         memory@40000000 {
  35                 device_type = "memory";
  36                 reg =  <0x40000000 0x40000000>;
  37         };
  38
  39         chosen {
  40                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  41                 stdout-path = &serial_2;
  42         };
  43
  44         firmware@204f000 {
  45                 compatible = "samsung,secure-firmware";
  46                 reg = <0x0204F000 0x1000>;
  47         };
  48
  49         fixed-rate-clocks {
  50                 xxti {
  51                         compatible = "samsung,clock-xxti", "fixed-clock";
  52                         clock-frequency = <0>;
  53                 };
  54
  55                 xusbxti {
  56                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  57                         clock-frequency = <24000000>;
  58                 };
  59         };
  60
  61         regulators {
  62                 compatible = "simple-bus";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65
  66                 cam_io_reg: voltage-regulator-1 {
  67                         compatible = "regulator-fixed";
  68                         regulator-name = "CAM_SENSOR_A";
  69                         regulator-min-microvolt = <2800000>;
  70                         regulator-max-microvolt = <2800000>;
  71                         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
  72                         enable-active-high;
  73                 };
  74
  75                 lcd_vdd3_reg: voltage-regulator-2 {
  76                         compatible = "regulator-fixed";
  77                         regulator-name = "LCD_VDD_2.2V";
  78                         regulator-min-microvolt = <2200000>;
  79                         regulator-max-microvolt = <2200000>;
  80                         gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
  81                         enable-active-high;
  82                 };
  83
  84                 cam_af_reg: voltage-regulator-3 {
  85                         compatible = "regulator-fixed";
  86                         regulator-name = "CAM_AF";
  87                         regulator-min-microvolt = <2800000>;
  88                         regulator-max-microvolt = <2800000>;
  89                         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
  90                         enable-active-high;
  91                 };
  92
  93                 ps_als_reg: voltage-regulator-5 {
  94                         compatible = "regulator-fixed";
  95                         regulator-name = "LED_A_3.0V";
  96                         regulator-min-microvolt = <3000000>;
  97                         regulator-max-microvolt = <3000000>;
  98                         gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
  99                         enable-active-high;
 100                 };
 101
 102                 vsil12: voltage-regulator-6 {
 103                         compatible = "regulator-fixed";
 104                         regulator-name = "VSIL_1.2V";
 105                         regulator-min-microvolt = <1200000>;
 106                         regulator-max-microvolt = <1200000>;
 107                         gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
 108                         enable-active-high;
 109                         vin-supply = <&buck7_reg>;
 110                 };
 111
 112                 vcc33mhl: voltage-regulator-7 {
 113                         compatible = "regulator-fixed";
 114                         regulator-name = "VCC_3.3_MHL";
 115                         regulator-min-microvolt = <3300000>;
 116                         regulator-max-microvolt = <3300000>;
 117                         gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
 118                         enable-active-high;
 119                 };
 120
 121                 vcc18mhl: voltage-regulator-8 {
 122                         compatible = "regulator-fixed";
 123                         regulator-name = "VCC_1.8_MHL";
 124                         regulator-min-microvolt = <1800000>;
 125                         regulator-max-microvolt = <1800000>;
 126                         gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
 127                         enable-active-high;
 128                 };
 129         };
 130
 131         gpio-keys {
 132                 compatible = "gpio-keys";
 133
 134                 key-down {
 135                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 136                         linux,code = <114>;
 137                         label = "volume down";
 138                         debounce-interval = <10>;
 139                 };
 140
 141                 key-up {
 142                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 143                         linux,code = <115>;
 144                         label = "volume up";
 145                         debounce-interval = <10>;
 146                 };
 147
 148                 key-power {
 149                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 150                         linux,code = <116>;
 151                         label = "power";
 152                         debounce-interval = <10>;
 153                         wakeup-source;
 154                 };
 155
 156                 key-ok {
 157                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 158                         linux,code = <139>;
 159                         label = "ok";
 160                         debounce-inteval = <10>;
 161                         wakeup-source;
 162                 };
 163         };
 164
 165         i2c_max77693: i2c-gpio-1 {
 166                 compatible = "i2c-gpio";
 167                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 168                 i2c-gpio,delay-us = <2>;
 169                 #address-cells = <1>;
 170                 #size-cells = <0>;
 171                 status = "okay";
 172
 173                 max77693@66 {
 174                         compatible = "maxim,max77693";
 175                         interrupt-parent = <&gpx1>;
 176                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 177                         reg = <0x66>;
 178
 179                         regulators {
 180                                 esafeout1_reg: ESAFEOUT1 {
 181                                         regulator-name = "ESAFEOUT1";
 182                                 };
 183                                 esafeout2_reg: ESAFEOUT2 {
 184                                         regulator-name = "ESAFEOUT2";
 185                                 };
 186                                 charger_reg: CHARGER {
 187                                         regulator-name = "CHARGER";
 188                                         regulator-min-microamp = <60000>;
 189                                         regulator-max-microamp = <2580000>;
 190                                 };
 191                         };
 192
 193                         max77693_haptic {
 194                                 compatible = "maxim,max77693-haptic";
 195                                 haptic-supply = <&ldo26_reg>;
 196                                 pwms = <&pwm 0 38022 0>;
 197                         };
 198
 199                         charger {
 200                                 compatible = "maxim,max77693-charger";
 201
 202                                 maxim,constant-microvolt = <4350000>;
 203                                 maxim,min-system-microvolt = <3600000>;
 204                                 maxim,thermal-regulation-celsius = <100>;
 205                                 maxim,battery-overcurrent-microamp = <3500000>;
 206                                 maxim,charge-input-threshold-microvolt = <4300000>;
 207                         };
 208                 };
 209         };
 210
 211         i2c_max77693_fuel: i2c-gpio-3 {
 212                 compatible = "i2c-gpio";
 213                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 214                 i2c-gpio,delay-us = <2>;
 215                 #address-cells = <1>;
 216                 #size-cells = <0>;
 217                 status = "okay";
 218
 219                 max77693-fuel-gauge@36 {
 220                         compatible = "maxim,max17047";
 221                         interrupt-parent = <&gpx2>;
 222                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 223                         reg = <0x36>;
 224
 225                         maxim,over-heat-temp = <700>;
 226                         maxim,over-volt = <4500>;
 227                 };
 228         };
 229
 230         i2c_ak8975: i2c-gpio-0 {
 231                 compatible = "i2c-gpio";
 232                 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 233                 i2c-gpio,delay-us = <2>;
 234                 #address-cells = <1>;
 235                 #size-cells = <0>;
 236                 status = "okay";
 237
 238                 ak8975@c {
 239                         compatible = "asahi-kasei,ak8975";
 240                         reg = <0x0c>;
 241                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 242                 };
 243         };
 244
 245         i2c_cm36651: i2c-gpio-2 {
 246                 compatible = "i2c-gpio";
 247                 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 248                 i2c-gpio,delay-us = <2>;
 249                 #address-cells = <1>;
 250                 #size-cells = <0>;
 251
 252                 cm36651@18 {
 253                         compatible = "capella,cm36651";
 254                         reg = <0x18>;
 255                         interrupt-parent = <&gpx0>;
 256                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 257                         vled-supply = <&ps_als_reg>;
 258                 };
 259         };
 260
 261         i2c-mhl {
 262                 compatible = "i2c-gpio";
 263                 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
 264                 i2c-gpio,delay-us = <100>;
 265                 #address-cells = <1>;
 266                 #size-cells = <0>;
 267
 268                 pinctrl-0 = <&i2c_mhl_bus>;
 269                 pinctrl-names = "default";
 270                 status = "okay";
 271
 272                 sii9234: hdmi-bridge@39 {
 273                         compatible = "sil,sii9234";
 274                         avcc33-supply = <&vcc33mhl>;
 275                         iovcc18-supply = <&vcc18mhl>;
 276                         avcc12-supply = <&vsil12>;
 277                         cvcc12-supply = <&vsil12>;
 278                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
 279                         interrupt-parent = <&gpf3>;
 280                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 281                         reg = <0x39>;
 282
 283                         port {
 284                                 mhl_to_hdmi: endpoint {
 285                                         remote-endpoint = <&hdmi_to_mhl>;
 286                                 };
 287                         };
 288                 };
 289         };
 290
 291         camera: camera {
 292                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 293                 pinctrl-names = "default";
 294                 status = "okay";
 295                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 296                                   <&clock CLK_MOUT_CAM1>;
 297                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 298                                          <&clock CLK_XUSBXTI>;
 299
 300
 301         };
 302
 303         sound {
 304                 compatible = "samsung,trats2-audio";
 305                 samsung,i2s-controller = <&i2s0>;
 306                 samsung,model = "Trats2";
 307                 samsung,audio-codec = <&wm1811>;
 308                 samsung,audio-routing =
 309                         "SPK", "SPKOUTLN",
 310                         "SPK", "SPKOUTLP",
 311                         "SPK", "SPKOUTRN",
 312                         "SPK", "SPKOUTRP";
 313         };
 314
 315         thermistor-ap {
 316                 compatible = "murata,ncp15wb473";
 317                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 318                 pullup-ohm = <100000>;   /* 100K */
 319                 pulldown-ohm = <100000>; /* 100K */
 320                 io-channels = <&adc 1>;  /* AP temperature */
 321         };
 322
 323         thermistor-battery {
 324                 compatible = "murata,ncp15wb473";
 325                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 326                 pullup-ohm = <100000>;   /* 100K */
 327                 pulldown-ohm = <100000>; /* 100K */
 328                 io-channels = <&adc 2>;  /* Battery temperature */
 329         };
 330
 331         thermal-zones {
 332                 cpu_thermal: cpu-thermal {
 333                         cooling-maps {
 334                                 map0 {
 335                                      /* Corresponds to 800MHz at freq_table */
 336                                      cooling-device = <&cpu0 7 7>;
 337                                 };
 338                                 map1 {
 339                                      /* Corresponds to 200MHz at freq_table */
 340                                      cooling-device = <&cpu0 13 13>;
 341                                };
 342                        };
 343                 };
 344         };
 345 };
 346
 347 &adc {
 348         vdd-supply = <&ldo3_reg>;
 349         status = "okay";
 350 };
 351
 352 &bus_dmc {
 353         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 354         vdd-supply = <&buck1_reg>;
 355         status = "okay";
 356 };
 357
 358 &bus_acp {
 359         devfreq = <&bus_dmc>;
 360         status = "okay";
 361 };
 362
 363 &bus_c2c {
 364         devfreq = <&bus_dmc>;
 365         status = "okay";
 366 };
 367
 368 &bus_leftbus {
 369         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 370         vdd-supply = <&buck3_reg>;
 371         status = "okay";
 372 };
 373
 374 &bus_rightbus {
 375         devfreq = <&bus_leftbus>;
 376         status = "okay";
 377 };
 378
 379 &bus_display {
 380         devfreq = <&bus_leftbus>;
 381         status = "okay";
 382 };
 383
 384 &bus_fsys {
 385         devfreq = <&bus_leftbus>;
 386         status = "okay";
 387 };
 388
 389 &bus_peri {
 390         devfreq = <&bus_leftbus>;
 391         status = "okay";
 392 };
 393
 394 &bus_mfc {
 395         devfreq = <&bus_leftbus>;
 396         status = "okay";
 397 };
 398
 399 &cpu0 {
 400         cpu0-supply = <&buck2_reg>;
 401 };
 402
 403 &csis_0 {
 404         status = "okay";
 405         vddcore-supply = <&ldo8_reg>;
 406         vddio-supply = <&ldo10_reg>;
 407         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 408                         <&clock CLK_SCLK_CSIS0>;
 409         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 410         assigned-clock-rates = <0>, <176000000>;
 411
 412         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 413         port@3 {
 414                 reg = <3>;
 415                 csis0_ep: endpoint {
 416                         remote-endpoint = <&s5c73m3_ep>;
 417                         data-lanes = <1 2 3 4>;
 418                         samsung,csis-hs-settle = <12>;
 419                 };
 420         };
 421 };
 422
 423 &csis_1 {
 424         status = "okay";
 425         vddcore-supply = <&ldo8_reg>;
 426         vddio-supply = <&ldo10_reg>;
 427         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 428                         <&clock CLK_SCLK_CSIS1>;
 429         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 430         assigned-clock-rates = <0>, <176000000>;
 431
 432         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 433         port@4 {
 434                 reg = <4>;
 435                 csis1_ep: endpoint {
 436                         remote-endpoint = <&is_s5k6a3_ep>;
 437                         data-lanes = <1>;
 438                         samsung,csis-hs-settle = <18>;
 439                         samsung,csis-wclk;
 440                 };
 441         };
 442 };
 443
 444 &dsi_0 {
 445         vddcore-supply = <&ldo8_reg>;
 446         vddio-supply = <&ldo10_reg>;
 447         samsung,burst-clock-frequency = <500000000>;
 448         samsung,esc-clock-frequency = <20000000>;
 449         samsung,pll-clock-frequency = <24000000>;
 450         status = "okay";
 451
 452         panel@0 {
 453                 compatible = "samsung,s6e8aa0";
 454                 reg = <0>;
 455                 vdd3-supply = <&lcd_vdd3_reg>;
 456                 vci-supply = <&ldo25_reg>;
 457                 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 458                 power-on-delay= <50>;
 459                 reset-delay = <100>;
 460                 init-delay = <100>;
 461                 flip-horizontal;
 462                 flip-vertical;
 463                 panel-width-mm = <58>;
 464                 panel-height-mm = <103>;
 465
 466                 display-timings {
 467                         timing-0 {
 468                                 clock-frequency = <57153600>;
 469                                 hactive = <720>;
 470                                 vactive = <1280>;
 471                                 hfront-porch = <5>;
 472                                 hback-porch = <5>;
 473                                 hsync-len = <5>;
 474                                 vfront-porch = <13>;
 475                                 vback-porch = <1>;
 476                                 vsync-len = <2>;
 477                         };
 478                 };
 479         };
 480 };
 481
 482 &exynos_usbphy {
 483         vbus-supply = <&esafeout1_reg>;
 484         status = "okay";
 485 };
 486
 487 &fimc_0 {
 488         status = "okay";
 489         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 490                         <&clock CLK_SCLK_FIMC0>;
 491         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 492         assigned-clock-rates = <0>, <176000000>;
 493 };
 494
 495 &fimc_1 {
 496         status = "okay";
 497         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 498                         <&clock CLK_SCLK_FIMC1>;
 499         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 500         assigned-clock-rates = <0>, <176000000>;
 501 };
 502
 503 &fimc_2 {
 504         status = "okay";
 505         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 506                         <&clock CLK_SCLK_FIMC2>;
 507         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 508         assigned-clock-rates = <0>, <176000000>;
 509 };
 510
 511 &fimc_3 {
 512         status = "okay";
 513         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 514                         <&clock CLK_SCLK_FIMC3>;
 515         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 516         assigned-clock-rates = <0>, <176000000>;
 517 };
 518
 519 &fimc_is {
 520         pinctrl-0 = <&fimc_is_uart>;
 521         pinctrl-names = "default";
 522         status = "okay";
 523
 524         i2c1_isp: i2c-isp@12140000 {
 525                 pinctrl-0 = <&fimc_is_i2c1>;
 526                 pinctrl-names = "default";
 527
 528                 s5k6a3@10 {
 529                         compatible = "samsung,s5k6a3";
 530                         reg = <0x10>;
 531                         svdda-supply = <&cam_io_reg>;
 532                         svddio-supply = <&ldo19_reg>;
 533                         afvdd-supply = <&ldo19_reg>;
 534                         clock-frequency = <24000000>;
 535                         /* CAM_B_CLKOUT */
 536                         clocks = <&camera 1>;
 537                         clock-names = "extclk";
 538                         samsung,camclk-out = <1>;
 539                         gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 540
 541                         port {
 542                                 is_s5k6a3_ep: endpoint {
 543                                         remote-endpoint = <&csis1_ep>;
 544                                         data-lanes = <1>;
 545                                 };
 546                         };
 547                 };
 548         };
 549 };
 550
 551 &fimc_lite_0 {
 552         status = "okay";
 553 };
 554
 555 &fimc_lite_1 {
 556         status = "okay";
 557 };
 558
 559 &fimd {
 560         status = "okay";
 561 };
 562
 563 &hdmi {
 564         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 565         pinctrl-names = "default";
 566         pinctrl-0 = <&hdmi_hpd>;
 567         vdd-supply = <&ldo3_reg>;
 568         vdd_osc-supply = <&ldo4_reg>;
 569         vdd_pll-supply = <&ldo3_reg>;
 570         ddc = <&i2c_5>;
 571         status = "okay";
 572
 573         ports {
 574                 #address-cells = <1>;
 575                 #size-cells = <0>;
 576
 577                 port@1 {
 578                         reg = <1>;
 579                         hdmi_to_mhl: endpoint {
 580                                 remote-endpoint = <&mhl_to_hdmi>;
 581                         };
 582                 };
 583         };
 584 };
 585
 586 &hsotg {
 587         vusb_d-supply = <&ldo15_reg>;
 588         vusb_a-supply = <&ldo12_reg>;
 589         dr_mode = "peripheral";
 590         status = "okay";
 591 };
 592
 593 &i2c_0 {
 594         samsung,i2c-sda-delay = <100>;
 595         samsung,i2c-slave-addr = <0x10>;
 596         samsung,i2c-max-bus-freq = <400000>;
 597         pinctrl-0 = <&i2c0_bus>;
 598         pinctrl-names = "default";
 599         status = "okay";
 600
 601         s5c73m3@3c {
 602                 compatible = "samsung,s5c73m3";
 603                 reg = <0x3c>;
 604                 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
 605                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 606                 vdd-int-supply = <&buck9_reg>;
 607                 vddio-cis-supply = <&ldo9_reg>;
 608                 vdda-supply = <&ldo17_reg>;
 609                 vddio-host-supply = <&ldo18_reg>;
 610                 vdd-af-supply = <&cam_af_reg>;
 611                 vdd-reg-supply = <&cam_io_reg>;
 612                 clock-frequency = <24000000>;
 613                 /* CAM_A_CLKOUT */
 614                 clocks = <&camera 0>;
 615                 clock-names = "cis_extclk";
 616                 port {
 617                         s5c73m3_ep: endpoint {
 618                                 remote-endpoint = <&csis0_ep>;
 619                                 data-lanes = <1 2 3 4>;
 620                         };
 621                 };
 622         };
 623 };
 624
 625 &i2c_3 {
 626         samsung,i2c-sda-delay = <100>;
 627         samsung,i2c-slave-addr = <0x10>;
 628         samsung,i2c-max-bus-freq = <400000>;
 629         pinctrl-0 = <&i2c3_bus>;
 630         pinctrl-names = "default";
 631         status = "okay";
 632
 633         mms114-touchscreen@48 {
 634                 compatible = "melfas,mms114";
 635                 reg = <0x48>;
 636                 interrupt-parent = <&gpm2>;
 637                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 638                 x-size = <720>;
 639                 y-size = <1280>;
 640                 avdd-supply = <&ldo23_reg>;
 641                 vdd-supply = <&ldo24_reg>;
 642         };
 643 };
 644
 645 &i2c_4 {
 646         samsung,i2c-sda-delay = <100>;
 647         samsung,i2c-slave-addr = <0x10>;
 648         samsung,i2c-max-bus-freq = <100000>;
 649         pinctrl-0 = <&i2c4_bus>;
 650         pinctrl-names = "default";
 651         status = "okay";
 652
 653         wm1811: wm1811@1a {
 654                 compatible = "wlf,wm1811";
 655                 reg = <0x1a>;
 656                 clocks = <&pmu_system_controller 0>;
 657                 clock-names = "MCLK1";
 658                 DCVDD-supply = <&ldo3_reg>;
 659                 DBVDD1-supply = <&ldo3_reg>;
 660                 wlf,ldo1ena = <&gpj0 4 0>;
 661         };
 662 };
 663
 664 &i2c_5 {
 665         status = "okay";
 666 };
 667
 668 &i2c_7 {
 669         samsung,i2c-sda-delay = <100>;
 670         samsung,i2c-slave-addr = <0x10>;
 671         samsung,i2c-max-bus-freq = <100000>;
 672         pinctrl-0 = <&i2c7_bus>;
 673         pinctrl-names = "default";
 674         status = "okay";
 675
 676         max77686: max77686_pmic@9 {
 677                 compatible = "maxim,max77686";
 678                 interrupt-parent = <&gpx0>;
 679                 interrupts = <7 IRQ_TYPE_NONE>;
 680                 reg = <0x09>;
 681                 #clock-cells = <1>;
 682
 683                 voltage-regulators {
 684                         ldo1_reg: LDO1 {
 685                                 regulator-name = "VALIVE_1.0V_AP";
 686                                 regulator-min-microvolt = <1000000>;
 687                                 regulator-max-microvolt = <1000000>;
 688                                 regulator-always-on;
 689                         };
 690
 691                         ldo2_reg: LDO2 {
 692                                 regulator-name = "VM1M2_1.2V_AP";
 693                                 regulator-min-microvolt = <1200000>;
 694                                 regulator-max-microvolt = <1200000>;
 695                                 regulator-always-on;
 696                                 regulator-state-mem {
 697                                         regulator-on-in-suspend;
 698                                 };
 699                         };
 700
 701                         ldo3_reg: LDO3 {
 702                                 regulator-name = "VCC_1.8V_AP";
 703                                 regulator-min-microvolt = <1800000>;
 704                                 regulator-max-microvolt = <1800000>;
 705                                 regulator-always-on;
 706                         };
 707
 708                         ldo4_reg: LDO4 {
 709                                 regulator-name = "VCC_2.8V_AP";
 710                                 regulator-min-microvolt = <2800000>;
 711                                 regulator-max-microvolt = <2800000>;
 712                                 regulator-always-on;
 713                         };
 714
 715                         ldo5_reg: LDO5 {
 716                                 regulator-name = "VCC_1.8V_IO";
 717                                 regulator-min-microvolt = <1800000>;
 718                                 regulator-max-microvolt = <1800000>;
 719                                 regulator-always-on;
 720                         };
 721
 722                         ldo6_reg: LDO6 {
 723                                 regulator-name = "VMPLL_1.0V_AP";
 724                                 regulator-min-microvolt = <1000000>;
 725                                 regulator-max-microvolt = <1000000>;
 726                                 regulator-always-on;
 727                                 regulator-state-mem {
 728                                         regulator-on-in-suspend;
 729                                 };
 730                         };
 731
 732                         ldo7_reg: LDO7 {
 733                                 regulator-name = "VPLL_1.0V_AP";
 734                                 regulator-min-microvolt = <1000000>;
 735                                 regulator-max-microvolt = <1000000>;
 736                                 regulator-always-on;
 737                                 regulator-state-mem {
 738                                         regulator-on-in-suspend;
 739                                 };
 740                         };
 741
 742                         ldo8_reg: LDO8 {
 743                                 regulator-name = "VMIPI_1.0V";
 744                                 regulator-min-microvolt = <1000000>;
 745                                 regulator-max-microvolt = <1000000>;
 746                                 regulator-state-mem {
 747                                         regulator-off-in-suspend;
 748                                 };
 749                         };
 750
 751                         ldo9_reg: LDO9 {
 752                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 753                                 regulator-min-microvolt = <1200000>;
 754                                 regulator-max-microvolt = <1200000>;
 755                         };
 756
 757                         ldo10_reg: LDO10 {
 758                                 regulator-name = "VMIPI_1.8V";
 759                                 regulator-min-microvolt = <1800000>;
 760                                 regulator-max-microvolt = <1800000>;
 761                                 regulator-state-mem {
 762                                         regulator-off-in-suspend;
 763                                 };
 764                         };
 765
 766                         ldo11_reg: LDO11 {
 767                                 regulator-name = "VABB1_1.95V";
 768                                 regulator-min-microvolt = <1950000>;
 769                                 regulator-max-microvolt = <1950000>;
 770                                 regulator-always-on;
 771                                 regulator-state-mem {
 772                                         regulator-off-in-suspend;
 773                                 };
 774                         };
 775
 776                         ldo12_reg: LDO12 {
 777                                 regulator-name = "VUOTG_3.0V";
 778                                 regulator-min-microvolt = <3000000>;
 779                                 regulator-max-microvolt = <3000000>;
 780                                 regulator-state-mem {
 781                                         regulator-off-in-suspend;
 782                                 };
 783                         };
 784
 785                         ldo13_reg: LDO13 {
 786                                 regulator-name = "NFC_AVDD_1.8V";
 787                                 regulator-min-microvolt = <1800000>;
 788                                 regulator-max-microvolt = <1800000>;
 789                         };
 790
 791                         ldo14_reg: LDO14 {
 792                                 regulator-name = "VABB2_1.95V";
 793                                 regulator-min-microvolt = <1950000>;
 794                                 regulator-max-microvolt = <1950000>;
 795                                 regulator-always-on;
 796                                 regulator-state-mem {
 797                                         regulator-off-in-suspend;
 798                                 };
 799                         };
 800
 801                         ldo15_reg: LDO15 {
 802                                 regulator-name = "VHSIC_1.0V";
 803                                 regulator-min-microvolt = <1000000>;
 804                                 regulator-max-microvolt = <1000000>;
 805                                 regulator-state-mem {
 806                                         regulator-on-in-suspend;
 807                                 };
 808                         };
 809
 810                         ldo16_reg: LDO16 {
 811                                 regulator-name = "VHSIC_1.8V";
 812                                 regulator-min-microvolt = <1800000>;
 813                                 regulator-max-microvolt = <1800000>;
 814                                 regulator-state-mem {
 815                                         regulator-on-in-suspend;
 816                                 };
 817                         };
 818
 819                         ldo17_reg: LDO17 {
 820                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 821                                 regulator-min-microvolt = <1200000>;
 822                                 regulator-max-microvolt = <1200000>;
 823                         };
 824
 825                         ldo18_reg: LDO18 {
 826                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 827                                 regulator-min-microvolt = <1800000>;
 828                                 regulator-max-microvolt = <1800000>;
 829                         };
 830
 831                         ldo19_reg: LDO19 {
 832                                 regulator-name = "VT_CAM_1.8V";
 833                                 regulator-min-microvolt = <1800000>;
 834                                 regulator-max-microvolt = <1800000>;
 835                         };
 836
 837                         ldo20_reg: LDO20 {
 838                                 regulator-name = "VDDQ_PRE_1.8V";
 839                                 regulator-min-microvolt = <1800000>;
 840                                 regulator-max-microvolt = <1800000>;
 841                         };
 842
 843                         ldo21_reg: LDO21 {
 844                                 regulator-name = "VTF_2.8V";
 845                                 regulator-min-microvolt = <2800000>;
 846                                 regulator-max-microvolt = <2800000>;
 847                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 848                         };
 849
 850                         ldo22_reg: LDO22 {
 851                                 regulator-name = "VMEM_VDD_2.8V";
 852                                 regulator-min-microvolt = <2800000>;
 853                                 regulator-max-microvolt = <2800000>;
 854                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 855                         };
 856
 857                         ldo23_reg: LDO23 {
 858                                 regulator-name = "TSP_AVDD_3.3V";
 859                                 regulator-min-microvolt = <3300000>;
 860                                 regulator-max-microvolt = <3300000>;
 861                         };
 862
 863                         ldo24_reg: LDO24 {
 864                                 regulator-name = "TSP_VDD_1.8V";
 865                                 regulator-min-microvolt = <1800000>;
 866                                 regulator-max-microvolt = <1800000>;
 867                         };
 868
 869                         ldo25_reg: LDO25 {
 870                                 regulator-name = "LCD_VCC_3.3V";
 871                                 regulator-min-microvolt = <2800000>;
 872                                 regulator-max-microvolt = <2800000>;
 873                         };
 874
 875                         ldo26_reg: LDO26 {
 876                                 regulator-name = "MOTOR_VCC_3.0V";
 877                                 regulator-min-microvolt = <3000000>;
 878                                 regulator-max-microvolt = <3000000>;
 879                         };
 880
 881                         buck1_reg: BUCK1 {
 882                                 regulator-name = "vdd_mif";
 883                                 regulator-min-microvolt = <850000>;
 884                                 regulator-max-microvolt = <1100000>;
 885                                 regulator-always-on;
 886                                 regulator-boot-on;
 887                                 regulator-state-mem {
 888                                         regulator-off-in-suspend;
 889                                 };
 890                         };
 891
 892                         buck2_reg: BUCK2 {
 893                                 regulator-name = "vdd_arm";
 894                                 regulator-min-microvolt = <850000>;
 895                                 regulator-max-microvolt = <1500000>;
 896                                 regulator-always-on;
 897                                 regulator-boot-on;
 898                                 regulator-state-mem {
 899                                         regulator-on-in-suspend;
 900                                 };
 901                         };
 902
 903                         buck3_reg: BUCK3 {
 904                                 regulator-name = "vdd_int";
 905                                 regulator-min-microvolt = <850000>;
 906                                 regulator-max-microvolt = <1150000>;
 907                                 regulator-always-on;
 908                                 regulator-boot-on;
 909                                 regulator-state-mem {
 910                                         regulator-off-in-suspend;
 911                                 };
 912                         };
 913
 914                         buck4_reg: BUCK4 {
 915                                 regulator-name = "vdd_g3d";
 916                                 regulator-min-microvolt = <850000>;
 917                                 regulator-max-microvolt = <1150000>;
 918                                 regulator-boot-on;
 919                                 regulator-state-mem {
 920                                         regulator-off-in-suspend;
 921                                 };
 922                         };
 923
 924                         buck5_reg: BUCK5 {
 925                                 regulator-name = "VMEM_1.2V_AP";
 926                                 regulator-min-microvolt = <1200000>;
 927                                 regulator-max-microvolt = <1200000>;
 928                                 regulator-always-on;
 929                         };
 930
 931                         buck6_reg: BUCK6 {
 932                                 regulator-name = "VCC_SUB_1.35V";
 933                                 regulator-min-microvolt = <1350000>;
 934                                 regulator-max-microvolt = <1350000>;
 935                                 regulator-always-on;
 936                         };
 937
 938                         buck7_reg: BUCK7 {
 939                                 regulator-name = "VCC_SUB_2.0V";
 940                                 regulator-min-microvolt = <2000000>;
 941                                 regulator-max-microvolt = <2000000>;
 942                                 regulator-always-on;
 943                         };
 944
 945                         buck8_reg: BUCK8 {
 946                                 regulator-name = "VMEM_VDDF_3.0V";
 947                                 regulator-min-microvolt = <2850000>;
 948                                 regulator-max-microvolt = <2850000>;
 949                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 950                         };
 951
 952                         buck9_reg: BUCK9 {
 953                                 regulator-name = "CAM_ISP_CORE_1.2V";
 954                                 regulator-min-microvolt = <1000000>;
 955                                 regulator-max-microvolt = <1200000>;
 956                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 957                         };
 958                 };
 959         };
 960 };
 961
 962 &i2c_8 {
 963         status = "okay";
 964 };
 965
 966 &i2s0 {
 967         pinctrl-0 = <&i2s0_bus>;
 968         pinctrl-names = "default";
 969         status = "okay";
 970 };
 971
 972 &mixer {
 973         status = "okay";
 974 };
 975
 976 &mshc_0 {
 977         broken-cd;
 978         non-removable;
 979         card-detect-delay = <200>;
 980         vmmc-supply = <&ldo22_reg>;
 981         clock-frequency = <400000000>;
 982         samsung,dw-mshc-ciu-div = <0>;
 983         samsung,dw-mshc-sdr-timing = <2 3>;
 984         samsung,dw-mshc-ddr-timing = <1 2>;
 985         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 986         pinctrl-names = "default";
 987         status = "okay";
 988         bus-width = <8>;
 989         cap-mmc-highspeed;
 990 };
 991
 992 &pmu_system_controller {
 993         assigned-clocks = <&pmu_system_controller 0>;
 994         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 995 };
 996
 997 &pinctrl_0 {
 998         pinctrl-names = "default";
 999         pinctrl-0 = <&sleep0>;
1000
1001         mhl_int: mhl-int {
1002                 samsung,pins = "gpf3-5";
1003                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1004         };
1005
1006         i2c_mhl_bus: i2c-mhl-bus {
1007                 samsung,pins = "gpf0-4", "gpf0-6";
1008                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
1009                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1010                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1011         };
1012
1013         sleep0: sleep-states {
1014                 PIN_SLP(gpa0-0, INPUT, NONE);
1015                 PIN_SLP(gpa0-1, OUT0, NONE);
1016                 PIN_SLP(gpa0-2, INPUT, NONE);
1017                 PIN_SLP(gpa0-3, INPUT, UP);
1018                 PIN_SLP(gpa0-4, INPUT, NONE);
1019                 PIN_SLP(gpa0-5, INPUT, DOWN);
1020                 PIN_SLP(gpa0-6, INPUT, DOWN);
1021                 PIN_SLP(gpa0-7, INPUT, UP);
1022
1023                 PIN_SLP(gpa1-0, INPUT, DOWN);
1024                 PIN_SLP(gpa1-1, INPUT, DOWN);
1025                 PIN_SLP(gpa1-2, INPUT, DOWN);
1026                 PIN_SLP(gpa1-3, INPUT, DOWN);
1027                 PIN_SLP(gpa1-4, INPUT, DOWN);
1028                 PIN_SLP(gpa1-5, INPUT, DOWN);
1029
1030                 PIN_SLP(gpb-0, INPUT, NONE);
1031                 PIN_SLP(gpb-1, INPUT, NONE);
1032                 PIN_SLP(gpb-2, INPUT, NONE);
1033                 PIN_SLP(gpb-3, INPUT, NONE);
1034                 PIN_SLP(gpb-4, INPUT, DOWN);
1035                 PIN_SLP(gpb-5, INPUT, UP);
1036                 PIN_SLP(gpb-6, INPUT, DOWN);
1037                 PIN_SLP(gpb-7, INPUT, DOWN);
1038
1039                 PIN_SLP(gpc0-0, INPUT, DOWN);
1040                 PIN_SLP(gpc0-1, INPUT, DOWN);
1041                 PIN_SLP(gpc0-2, INPUT, DOWN);
1042                 PIN_SLP(gpc0-3, INPUT, DOWN);
1043                 PIN_SLP(gpc0-4, INPUT, DOWN);
1044
1045                 PIN_SLP(gpc1-0, INPUT, NONE);
1046                 PIN_SLP(gpc1-1, PREV, NONE);
1047                 PIN_SLP(gpc1-2, INPUT, NONE);
1048                 PIN_SLP(gpc1-3, INPUT, NONE);
1049                 PIN_SLP(gpc1-4, INPUT, NONE);
1050
1051                 PIN_SLP(gpd0-0, INPUT, DOWN);
1052                 PIN_SLP(gpd0-1, INPUT, DOWN);
1053                 PIN_SLP(gpd0-2, INPUT, NONE);
1054                 PIN_SLP(gpd0-3, INPUT, NONE);
1055
1056                 PIN_SLP(gpd1-0, INPUT, DOWN);
1057                 PIN_SLP(gpd1-1, INPUT, DOWN);
1058                 PIN_SLP(gpd1-2, INPUT, NONE);
1059                 PIN_SLP(gpd1-3, INPUT, NONE);
1060
1061                 PIN_SLP(gpf0-0, INPUT, NONE);
1062                 PIN_SLP(gpf0-1, INPUT, NONE);
1063                 PIN_SLP(gpf0-2, INPUT, DOWN);
1064                 PIN_SLP(gpf0-3, INPUT, DOWN);
1065                 PIN_SLP(gpf0-4, INPUT, NONE);
1066                 PIN_SLP(gpf0-5, INPUT, DOWN);
1067                 PIN_SLP(gpf0-6, INPUT, NONE);
1068                 PIN_SLP(gpf0-7, INPUT, DOWN);
1069
1070                 PIN_SLP(gpf1-0, INPUT, DOWN);
1071                 PIN_SLP(gpf1-1, INPUT, DOWN);
1072                 PIN_SLP(gpf1-2, INPUT, DOWN);
1073                 PIN_SLP(gpf1-3, INPUT, DOWN);
1074                 PIN_SLP(gpf1-4, INPUT, NONE);
1075                 PIN_SLP(gpf1-5, INPUT, NONE);
1076                 PIN_SLP(gpf1-6, INPUT, DOWN);
1077                 PIN_SLP(gpf1-7, PREV, NONE);
1078
1079                 PIN_SLP(gpf2-0, PREV, NONE);
1080                 PIN_SLP(gpf2-1, INPUT, DOWN);
1081                 PIN_SLP(gpf2-2, INPUT, DOWN);
1082                 PIN_SLP(gpf2-3, INPUT, DOWN);
1083                 PIN_SLP(gpf2-4, INPUT, DOWN);
1084                 PIN_SLP(gpf2-5, INPUT, DOWN);
1085                 PIN_SLP(gpf2-6, INPUT, NONE);
1086                 PIN_SLP(gpf2-7, INPUT, NONE);
1087
1088                 PIN_SLP(gpf3-0, INPUT, NONE);
1089                 PIN_SLP(gpf3-1, PREV, NONE);
1090                 PIN_SLP(gpf3-2, PREV, NONE);
1091                 PIN_SLP(gpf3-3, PREV, NONE);
1092                 PIN_SLP(gpf3-4, OUT1, NONE);
1093                 PIN_SLP(gpf3-5, INPUT, DOWN);
1094
1095                 PIN_SLP(gpj0-0, PREV, NONE);
1096                 PIN_SLP(gpj0-1, PREV, NONE);
1097                 PIN_SLP(gpj0-2, PREV, NONE);
1098                 PIN_SLP(gpj0-3, INPUT, DOWN);
1099                 PIN_SLP(gpj0-4, PREV, NONE);
1100                 PIN_SLP(gpj0-5, PREV, NONE);
1101                 PIN_SLP(gpj0-6, INPUT, DOWN);
1102                 PIN_SLP(gpj0-7, INPUT, DOWN);
1103
1104                 PIN_SLP(gpj1-0, INPUT, DOWN);
1105                 PIN_SLP(gpj1-1, PREV, NONE);
1106                 PIN_SLP(gpj1-2, PREV, NONE);
1107                 PIN_SLP(gpj1-3, INPUT, DOWN);
1108                 PIN_SLP(gpj1-4, INPUT, DOWN);
1109         };
1110 };
1111
1112 &pinctrl_1 {
1113         pinctrl-names = "default";
1114         pinctrl-0 = <&sleep1>;
1115
1116         hdmi_hpd: hdmi-hpd {
1117                 samsung,pins = "gpx3-7";
1118                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1119         };
1120
1121         sleep1: sleep-states {
1122                 PIN_SLP(gpk0-0, PREV, NONE);
1123                 PIN_SLP(gpk0-1, PREV, NONE);
1124                 PIN_SLP(gpk0-2, OUT0, NONE);
1125                 PIN_SLP(gpk0-3, PREV, NONE);
1126                 PIN_SLP(gpk0-4, PREV, NONE);
1127                 PIN_SLP(gpk0-5, PREV, NONE);
1128                 PIN_SLP(gpk0-6, PREV, NONE);
1129
1130                 PIN_SLP(gpk1-0, INPUT, DOWN);
1131                 PIN_SLP(gpk1-1, INPUT, DOWN);
1132                 PIN_SLP(gpk1-2, INPUT, DOWN);
1133                 PIN_SLP(gpk1-3, PREV, NONE);
1134                 PIN_SLP(gpk1-4, PREV, NONE);
1135                 PIN_SLP(gpk1-5, PREV, NONE);
1136                 PIN_SLP(gpk1-6, PREV, NONE);
1137
1138                 PIN_SLP(gpk2-0, INPUT, DOWN);
1139                 PIN_SLP(gpk2-1, INPUT, DOWN);
1140                 PIN_SLP(gpk2-2, INPUT, DOWN);
1141                 PIN_SLP(gpk2-3, INPUT, DOWN);
1142                 PIN_SLP(gpk2-4, INPUT, DOWN);
1143                 PIN_SLP(gpk2-5, INPUT, DOWN);
1144                 PIN_SLP(gpk2-6, INPUT, DOWN);
1145
1146                 PIN_SLP(gpk3-0, OUT0, NONE);
1147                 PIN_SLP(gpk3-1, INPUT, NONE);
1148                 PIN_SLP(gpk3-2, INPUT, DOWN);
1149                 PIN_SLP(gpk3-3, INPUT, NONE);
1150                 PIN_SLP(gpk3-4, INPUT, NONE);
1151                 PIN_SLP(gpk3-5, INPUT, NONE);
1152                 PIN_SLP(gpk3-6, INPUT, NONE);
1153
1154                 PIN_SLP(gpl0-0, INPUT, DOWN);
1155                 PIN_SLP(gpl0-1, INPUT, DOWN);
1156                 PIN_SLP(gpl0-2, INPUT, DOWN);
1157                 PIN_SLP(gpl0-3, INPUT, DOWN);
1158                 PIN_SLP(gpl0-4, PREV, NONE);
1159                 PIN_SLP(gpl0-6, PREV, NONE);
1160
1161                 PIN_SLP(gpl1-0, INPUT, DOWN);
1162                 PIN_SLP(gpl1-1, INPUT, DOWN);
1163                 PIN_SLP(gpl2-0, INPUT, DOWN);
1164                 PIN_SLP(gpl2-1, INPUT, DOWN);
1165                 PIN_SLP(gpl2-2, INPUT, DOWN);
1166                 PIN_SLP(gpl2-3, INPUT, DOWN);
1167                 PIN_SLP(gpl2-4, INPUT, DOWN);
1168                 PIN_SLP(gpl2-5, INPUT, DOWN);
1169                 PIN_SLP(gpl2-6, PREV, NONE);
1170                 PIN_SLP(gpl2-7, INPUT, DOWN);
1171
1172                 PIN_SLP(gpm0-0, INPUT, DOWN);
1173                 PIN_SLP(gpm0-1, INPUT, DOWN);
1174                 PIN_SLP(gpm0-2, INPUT, DOWN);
1175                 PIN_SLP(gpm0-3, INPUT, DOWN);
1176                 PIN_SLP(gpm0-4, INPUT, DOWN);
1177                 PIN_SLP(gpm0-5, INPUT, DOWN);
1178                 PIN_SLP(gpm0-6, INPUT, DOWN);
1179                 PIN_SLP(gpm0-7, INPUT, DOWN);
1180
1181                 PIN_SLP(gpm1-0, INPUT, DOWN);
1182                 PIN_SLP(gpm1-1, INPUT, DOWN);
1183                 PIN_SLP(gpm1-2, INPUT, NONE);
1184                 PIN_SLP(gpm1-3, INPUT, NONE);
1185                 PIN_SLP(gpm1-4, INPUT, NONE);
1186                 PIN_SLP(gpm1-5, INPUT, NONE);
1187                 PIN_SLP(gpm1-6, INPUT, DOWN);
1188
1189                 PIN_SLP(gpm2-0, INPUT, NONE);
1190                 PIN_SLP(gpm2-1, INPUT, NONE);
1191                 PIN_SLP(gpm2-2, INPUT, DOWN);
1192                 PIN_SLP(gpm2-3, INPUT, DOWN);
1193                 PIN_SLP(gpm2-4, INPUT, DOWN);
1194
1195                 PIN_SLP(gpm3-0, PREV, NONE);
1196                 PIN_SLP(gpm3-1, PREV, NONE);
1197                 PIN_SLP(gpm3-2, PREV, NONE);
1198                 PIN_SLP(gpm3-3, OUT1, NONE);
1199                 PIN_SLP(gpm3-4, INPUT, DOWN);
1200                 PIN_SLP(gpm3-5, INPUT, DOWN);
1201                 PIN_SLP(gpm3-6, INPUT, DOWN);
1202                 PIN_SLP(gpm3-7, INPUT, DOWN);
1203
1204                 PIN_SLP(gpm4-0, INPUT, DOWN);
1205                 PIN_SLP(gpm4-1, INPUT, DOWN);
1206                 PIN_SLP(gpm4-2, INPUT, DOWN);
1207                 PIN_SLP(gpm4-3, INPUT, DOWN);
1208                 PIN_SLP(gpm4-4, INPUT, DOWN);
1209                 PIN_SLP(gpm4-5, INPUT, DOWN);
1210                 PIN_SLP(gpm4-6, INPUT, DOWN);
1211                 PIN_SLP(gpm4-7, INPUT, DOWN);
1212
1213                 PIN_SLP(gpy0-0, INPUT, DOWN);
1214                 PIN_SLP(gpy0-1, INPUT, DOWN);
1215                 PIN_SLP(gpy0-2, INPUT, DOWN);
1216                 PIN_SLP(gpy0-3, INPUT, DOWN);
1217                 PIN_SLP(gpy0-4, INPUT, DOWN);
1218                 PIN_SLP(gpy0-5, INPUT, DOWN);
1219
1220                 PIN_SLP(gpy1-0, INPUT, DOWN);
1221                 PIN_SLP(gpy1-1, INPUT, DOWN);
1222                 PIN_SLP(gpy1-2, INPUT, DOWN);
1223                 PIN_SLP(gpy1-3, INPUT, DOWN);
1224
1225                 PIN_SLP(gpy2-0, PREV, NONE);
1226                 PIN_SLP(gpy2-1, INPUT, DOWN);
1227                 PIN_SLP(gpy2-2, INPUT, NONE);
1228                 PIN_SLP(gpy2-3, INPUT, NONE);
1229                 PIN_SLP(gpy2-4, INPUT, NONE);
1230                 PIN_SLP(gpy2-5, INPUT, NONE);
1231
1232                 PIN_SLP(gpy3-0, INPUT, DOWN);
1233                 PIN_SLP(gpy3-1, INPUT, DOWN);
1234                 PIN_SLP(gpy3-2, INPUT, DOWN);
1235                 PIN_SLP(gpy3-3, INPUT, DOWN);
1236                 PIN_SLP(gpy3-4, INPUT, DOWN);
1237                 PIN_SLP(gpy3-5, INPUT, DOWN);
1238                 PIN_SLP(gpy3-6, INPUT, DOWN);
1239                 PIN_SLP(gpy3-7, INPUT, DOWN);
1240
1241                 PIN_SLP(gpy4-0, INPUT, DOWN);
1242                 PIN_SLP(gpy4-1, INPUT, DOWN);
1243                 PIN_SLP(gpy4-2, INPUT, DOWN);
1244                 PIN_SLP(gpy4-3, INPUT, DOWN);
1245                 PIN_SLP(gpy4-4, INPUT, DOWN);
1246                 PIN_SLP(gpy4-5, INPUT, DOWN);
1247                 PIN_SLP(gpy4-6, INPUT, DOWN);
1248                 PIN_SLP(gpy4-7, INPUT, DOWN);
1249
1250                 PIN_SLP(gpy5-0, INPUT, DOWN);
1251                 PIN_SLP(gpy5-1, INPUT, DOWN);
1252                 PIN_SLP(gpy5-2, INPUT, DOWN);
1253                 PIN_SLP(gpy5-3, INPUT, DOWN);
1254                 PIN_SLP(gpy5-4, INPUT, DOWN);
1255                 PIN_SLP(gpy5-5, INPUT, DOWN);
1256                 PIN_SLP(gpy5-6, INPUT, DOWN);
1257                 PIN_SLP(gpy5-7, INPUT, DOWN);
1258
1259                 PIN_SLP(gpy6-0, INPUT, DOWN);
1260                 PIN_SLP(gpy6-1, INPUT, DOWN);
1261                 PIN_SLP(gpy6-2, INPUT, DOWN);
1262                 PIN_SLP(gpy6-3, INPUT, DOWN);
1263                 PIN_SLP(gpy6-4, INPUT, DOWN);
1264                 PIN_SLP(gpy6-5, INPUT, DOWN);
1265                 PIN_SLP(gpy6-6, INPUT, DOWN);
1266                 PIN_SLP(gpy6-7, INPUT, DOWN);
1267         };
1268 };
1269
1270 &pinctrl_2 {
1271         pinctrl-names = "default";
1272         pinctrl-0 = <&sleep2>;
1273
1274         sleep2: sleep-states {
1275                 PIN_SLP(gpz-0, INPUT, DOWN);
1276                 PIN_SLP(gpz-1, INPUT, DOWN);
1277                 PIN_SLP(gpz-2, INPUT, DOWN);
1278                 PIN_SLP(gpz-3, INPUT, DOWN);
1279                 PIN_SLP(gpz-4, INPUT, DOWN);
1280                 PIN_SLP(gpz-5, INPUT, DOWN);
1281                 PIN_SLP(gpz-6, INPUT, DOWN);
1282         };
1283 };
1284
1285 &pinctrl_3 {
1286         pinctrl-names = "default";
1287         pinctrl-0 = <&sleep3>;
1288
1289         sleep3: sleep-states {
1290                 PIN_SLP(gpv0-0, INPUT, DOWN);
1291                 PIN_SLP(gpv0-1, INPUT, DOWN);
1292                 PIN_SLP(gpv0-2, INPUT, DOWN);
1293                 PIN_SLP(gpv0-3, INPUT, DOWN);
1294                 PIN_SLP(gpv0-4, INPUT, DOWN);
1295                 PIN_SLP(gpv0-5, INPUT, DOWN);
1296                 PIN_SLP(gpv0-6, INPUT, DOWN);
1297                 PIN_SLP(gpv0-7, INPUT, DOWN);
1298
1299                 PIN_SLP(gpv1-0, INPUT, DOWN);
1300                 PIN_SLP(gpv1-1, INPUT, DOWN);
1301                 PIN_SLP(gpv1-2, INPUT, DOWN);
1302                 PIN_SLP(gpv1-3, INPUT, DOWN);
1303                 PIN_SLP(gpv1-4, INPUT, DOWN);
1304                 PIN_SLP(gpv1-5, INPUT, DOWN);
1305                 PIN_SLP(gpv1-6, INPUT, DOWN);
1306                 PIN_SLP(gpv1-7, INPUT, DOWN);
1307
1308                 PIN_SLP(gpv2-0, INPUT, DOWN);
1309                 PIN_SLP(gpv2-1, INPUT, DOWN);
1310                 PIN_SLP(gpv2-2, INPUT, DOWN);
1311                 PIN_SLP(gpv2-3, INPUT, DOWN);
1312                 PIN_SLP(gpv2-4, INPUT, DOWN);
1313                 PIN_SLP(gpv2-5, INPUT, DOWN);
1314                 PIN_SLP(gpv2-6, INPUT, DOWN);
1315                 PIN_SLP(gpv2-7, INPUT, DOWN);
1316
1317                 PIN_SLP(gpv3-0, INPUT, DOWN);
1318                 PIN_SLP(gpv3-1, INPUT, DOWN);
1319                 PIN_SLP(gpv3-2, INPUT, DOWN);
1320                 PIN_SLP(gpv3-3, INPUT, DOWN);
1321                 PIN_SLP(gpv3-4, INPUT, DOWN);
1322                 PIN_SLP(gpv3-5, INPUT, DOWN);
1323                 PIN_SLP(gpv3-6, INPUT, DOWN);
1324                 PIN_SLP(gpv3-7, INPUT, DOWN);
1325
1326                 PIN_SLP(gpv4-0, INPUT, DOWN);
1327         };
1328 };
1329
1330 &pwm {
1331         pinctrl-0 = <&pwm0_out>;
1332         pinctrl-names = "default";
1333         samsung,pwm-outputs = <0>;
1334         status = "okay";
1335 };
1336
1337 &rtc {
1338         status = "okay";
1339         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1340         clock-names = "rtc", "rtc_src";
1341 };
1342
1343 &sdhci_2 {
1344         bus-width = <4>;
1345         cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1346         cd-inverted;
1347         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1348         pinctrl-names = "default";
1349         vmmc-supply = <&ldo21_reg>;
1350         status = "okay";
1351 };
1352
1353 &serial_0 {
1354         status = "okay";
1355 };
1356
1357 &serial_1 {
1358         status = "okay";
1359 };
1360
1361 &serial_2 {
1362         status = "okay";
1363 };
1364
1365 &serial_3 {
1366         status = "okay";
1367 };
1368
1369 &spi_1 {
1370         pinctrl-names = "default";
1371         pinctrl-0 = <&spi1_bus>;
1372         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1373         status = "okay";
1374
1375         s5c73m3_spi: s5c73m3@0 {
1376                 compatible = "samsung,s5c73m3";
1377                 spi-max-frequency = <50000000>;
1378                 reg = <0>;
1379                 controller-data {
1380                         samsung,spi-feedback-delay = <2>;
1381                 };
1382         };
1383 };
1384
1385 &tmu {
1386         vtmu-supply = <&ldo10_reg>;
1387         status = "okay";
1388 };