iommu/exynos: Add callback for initializing devices from device tree
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / exynos4412-trats2.dts
1 /*
2  * Samsung's Exynos4412 based Trats 2 board device tree source
3  *
4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * Device tree source file for Samsung's Trats 2 board which is based on
8  * Samsung's Exynos4412 SoC.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13 */
14
15 /dts-v1/;
16 #include "exynos4412.dtsi"
17 #include <dt-bindings/gpio/gpio.h>
18 #include <dt-bindings/interrupt-controller/irq.h>
19
20 / {
21         model = "Samsung Trats 2 based on Exynos4412";
22         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
23
24         aliases {
25                 i2c9 = &i2c_ak8975;
26                 i2c10 = &i2c_cm36651;
27                 i2c11 = &i2c_max77693;
28                 i2c12 = &i2c_max77693_fuel;
29         };
30
31         memory {
32                 reg =  <0x40000000 0x40000000>;
33         };
34
35         chosen {
36                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
37                 stdout-path = &serial_2;
38         };
39
40         firmware@0204F000 {
41                 compatible = "samsung,secure-firmware";
42                 reg = <0x0204F000 0x1000>;
43         };
44
45         fixed-rate-clocks {
46                 xxti {
47                         compatible = "samsung,clock-xxti", "fixed-clock";
48                         clock-frequency = <0>;
49                 };
50
51                 xusbxti {
52                         compatible = "samsung,clock-xusbxti", "fixed-clock";
53                         clock-frequency = <24000000>;
54                 };
55         };
56
57         regulators {
58                 compatible = "simple-bus";
59                 #address-cells = <1>;
60                 #size-cells = <0>;
61
62                 cam_io_reg: voltage-regulator-1 {
63                         compatible = "regulator-fixed";
64                         regulator-name = "CAM_SENSOR_A";
65                         regulator-min-microvolt = <2800000>;
66                         regulator-max-microvolt = <2800000>;
67                         gpio = <&gpm0 2 0>;
68                         enable-active-high;
69                 };
70
71                 lcd_vdd3_reg: voltage-regulator-2 {
72                         compatible = "regulator-fixed";
73                         regulator-name = "LCD_VDD_2.2V";
74                         regulator-min-microvolt = <2200000>;
75                         regulator-max-microvolt = <2200000>;
76                         gpio = <&gpc0 1 0>;
77                         enable-active-high;
78                 };
79
80                 cam_af_reg: voltage-regulator-3 {
81                         compatible = "regulator-fixed";
82                         regulator-name = "CAM_AF";
83                         regulator-min-microvolt = <2800000>;
84                         regulator-max-microvolt = <2800000>;
85                         gpio = <&gpm0 4 0>;
86                         enable-active-high;
87                 };
88
89                 ps_als_reg: voltage-regulator-5 {
90                         compatible = "regulator-fixed";
91                         regulator-name = "LED_A_3.0V";
92                         regulator-min-microvolt = <3000000>;
93                         regulator-max-microvolt = <3000000>;
94                         gpio = <&gpj0 5 0>;
95                         enable-active-high;
96                 };
97         };
98
99         gpio-keys {
100                 compatible = "gpio-keys";
101
102                 key-down {
103                         gpios = <&gpx3 3 1>;
104                         linux,code = <114>;
105                         label = "volume down";
106                         debounce-interval = <10>;
107                 };
108
109                 key-up {
110                         gpios = <&gpx2 2 1>;
111                         linux,code = <115>;
112                         label = "volume up";
113                         debounce-interval = <10>;
114                 };
115
116                 key-power {
117                         gpios = <&gpx2 7 1>;
118                         linux,code = <116>;
119                         label = "power";
120                         debounce-interval = <10>;
121                         gpio-key,wakeup;
122                 };
123
124                 key-ok {
125                         gpios = <&gpx0 1 1>;
126                         linux,code = <139>;
127                         label = "ok";
128                         debounce-inteval = <10>;
129                         gpio-key,wakeup;
130                 };
131         };
132
133         adc: adc@126C0000 {
134                 vdd-supply = <&ldo3_reg>;
135                 status = "okay";
136         };
137
138         i2c@13890000 {
139                 samsung,i2c-sda-delay = <100>;
140                 samsung,i2c-slave-addr = <0x10>;
141                 samsung,i2c-max-bus-freq = <400000>;
142                 pinctrl-0 = <&i2c3_bus>;
143                 pinctrl-names = "default";
144                 status = "okay";
145
146                 mms114-touchscreen@48 {
147                         compatible = "melfas,mms114";
148                         reg = <0x48>;
149                         interrupt-parent = <&gpm2>;
150                         interrupts = <3 2>;
151                         x-size = <720>;
152                         y-size = <1280>;
153                         avdd-supply = <&ldo23_reg>;
154                         vdd-supply = <&ldo24_reg>;
155                 };
156         };
157
158         i2c_0: i2c@13860000 {
159                 samsung,i2c-sda-delay = <100>;
160                 samsung,i2c-slave-addr = <0x10>;
161                 samsung,i2c-max-bus-freq = <400000>;
162                 pinctrl-0 = <&i2c0_bus>;
163                 pinctrl-names = "default";
164                 status = "okay";
165
166                 s5c73m3@3c {
167                         compatible = "samsung,s5c73m3";
168                         reg = <0x3c>;
169                         standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
170                         xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
171                         vdd-int-supply = <&buck9_reg>;
172                         vddio-cis-supply = <&ldo9_reg>;
173                         vdda-supply = <&ldo17_reg>;
174                         vddio-host-supply = <&ldo18_reg>;
175                         vdd-af-supply = <&cam_af_reg>;
176                         vdd-reg-supply = <&cam_io_reg>;
177                         clock-frequency = <24000000>;
178                         /* CAM_A_CLKOUT */
179                         clocks = <&camera 0>;
180                         clock-names = "cis_extclk";
181                         port {
182                                 s5c73m3_ep: endpoint {
183                                         remote-endpoint = <&csis0_ep>;
184                                         data-lanes = <1 2 3 4>;
185                                 };
186                         };
187                 };
188         };
189
190         i2c@138A0000 {
191                 samsung,i2c-sda-delay = <100>;
192                 samsung,i2c-slave-addr = <0x10>;
193                 samsung,i2c-max-bus-freq = <100000>;
194                 pinctrl-0 = <&i2c4_bus>;
195                 pinctrl-names = "default";
196                 status = "okay";
197
198                 wm1811: wm1811@1a {
199                         compatible = "wlf,wm1811";
200                         reg = <0x1a>;
201                         clocks = <&pmu_system_controller 0>;
202                         clock-names = "MCLK1";
203                         DCVDD-supply = <&ldo3_reg>;
204                         DBVDD1-supply = <&ldo3_reg>;
205                         wlf,ldo1ena = <&gpj0 4 0>;
206                 };
207         };
208
209         i2c@138D0000 {
210                 samsung,i2c-sda-delay = <100>;
211                 samsung,i2c-slave-addr = <0x10>;
212                 samsung,i2c-max-bus-freq = <100000>;
213                 pinctrl-0 = <&i2c7_bus>;
214                 pinctrl-names = "default";
215                 status = "okay";
216
217                 max77686_pmic@09 {
218                         compatible = "maxim,max77686";
219                         interrupt-parent = <&gpx0>;
220                         interrupts = <7 0>;
221                         reg = <0x09>;
222                         #clock-cells = <1>;
223
224                         voltage-regulators {
225                                 ldo1_reg: ldo1 {
226                                         regulator-compatible = "LDO1";
227                                         regulator-name = "VALIVE_1.0V_AP";
228                                         regulator-min-microvolt = <1000000>;
229                                         regulator-max-microvolt = <1000000>;
230                                         regulator-always-on;
231                                 };
232
233                                 ldo2_reg: ldo2 {
234                                         regulator-compatible = "LDO2";
235                                         regulator-name = "VM1M2_1.2V_AP";
236                                         regulator-min-microvolt = <1200000>;
237                                         regulator-max-microvolt = <1200000>;
238                                         regulator-always-on;
239                                         regulator-state-mem {
240                                                 regulator-on-in-suspend;
241                                         };
242                                 };
243
244                                 ldo3_reg: ldo3 {
245                                         regulator-compatible = "LDO3";
246                                         regulator-name = "VCC_1.8V_AP";
247                                         regulator-min-microvolt = <1800000>;
248                                         regulator-max-microvolt = <1800000>;
249                                         regulator-always-on;
250                                 };
251
252                                 ldo4_reg: ldo4 {
253                                         regulator-compatible = "LDO4";
254                                         regulator-name = "VCC_2.8V_AP";
255                                         regulator-min-microvolt = <2800000>;
256                                         regulator-max-microvolt = <2800000>;
257                                         regulator-always-on;
258                                 };
259
260                                 ldo5_reg: ldo5 {
261                                         regulator-compatible = "LDO5";
262                                         regulator-name = "VCC_1.8V_IO";
263                                         regulator-min-microvolt = <1800000>;
264                                         regulator-max-microvolt = <1800000>;
265                                         regulator-always-on;
266                                 };
267
268                                 ldo6_reg: ldo6 {
269                                         regulator-compatible = "LDO6";
270                                         regulator-name = "VMPLL_1.0V_AP";
271                                         regulator-min-microvolt = <1000000>;
272                                         regulator-max-microvolt = <1000000>;
273                                         regulator-always-on;
274                                         regulator-state-mem {
275                                                 regulator-on-in-suspend;
276                                         };
277                                 };
278
279                                 ldo7_reg: ldo7 {
280                                         regulator-compatible = "LDO7";
281                                         regulator-name = "VPLL_1.0V_AP";
282                                         regulator-min-microvolt = <1000000>;
283                                         regulator-max-microvolt = <1000000>;
284                                         regulator-always-on;
285                                         regulator-state-mem {
286                                                 regulator-on-in-suspend;
287                                         };
288                                 };
289
290                                 ldo8_reg: ldo8 {
291                                         regulator-compatible = "LDO8";
292                                         regulator-name = "VMIPI_1.0V";
293                                         regulator-min-microvolt = <1000000>;
294                                         regulator-max-microvolt = <1000000>;
295                                         regulator-state-mem {
296                                                 regulator-off-in-suspend;
297                                         };
298                                 };
299
300                                 ldo9_reg: ldo9 {
301                                         regulator-compatible = "LDO9";
302                                         regulator-name = "CAM_ISP_MIPI_1.2V";
303                                         regulator-min-microvolt = <1200000>;
304                                         regulator-max-microvolt = <1200000>;
305                                 };
306
307                                 ldo10_reg: ldo10 {
308                                         regulator-compatible = "LDO10";
309                                         regulator-name = "VMIPI_1.8V";
310                                         regulator-min-microvolt = <1800000>;
311                                         regulator-max-microvolt = <1800000>;
312                                         regulator-state-mem {
313                                                 regulator-off-in-suspend;
314                                         };
315                                 };
316
317                                 ldo11_reg: ldo11 {
318                                         regulator-compatible = "LDO11";
319                                         regulator-name = "VABB1_1.95V";
320                                         regulator-min-microvolt = <1950000>;
321                                         regulator-max-microvolt = <1950000>;
322                                         regulator-always-on;
323                                         regulator-state-mem {
324                                                 regulator-off-in-suspend;
325                                         };
326                                 };
327
328                                 ldo12_reg: ldo12 {
329                                         regulator-compatible = "LDO12";
330                                         regulator-name = "VUOTG_3.0V";
331                                         regulator-min-microvolt = <3000000>;
332                                         regulator-max-microvolt = <3000000>;
333                                         regulator-state-mem {
334                                                 regulator-off-in-suspend;
335                                         };
336                                 };
337
338                                 ldo13_reg: ldo13 {
339                                         regulator-compatible = "LDO13";
340                                         regulator-name = "NFC_AVDD_1.8V";
341                                         regulator-min-microvolt = <1800000>;
342                                         regulator-max-microvolt = <1800000>;
343                                 };
344
345                                 ldo14_reg: ldo14 {
346                                         regulator-compatible = "LDO14";
347                                         regulator-name = "VABB2_1.95V";
348                                         regulator-min-microvolt = <1950000>;
349                                         regulator-max-microvolt = <1950000>;
350                                         regulator-always-on;
351                                         regulator-state-mem {
352                                                 regulator-off-in-suspend;
353                                         };
354                                 };
355
356                                 ldo15_reg: ldo15 {
357                                         regulator-compatible = "LDO15";
358                                         regulator-name = "VHSIC_1.0V";
359                                         regulator-min-microvolt = <1000000>;
360                                         regulator-max-microvolt = <1000000>;
361                                         regulator-state-mem {
362                                                 regulator-on-in-suspend;
363                                         };
364                                 };
365
366                                 ldo16_reg: ldo16 {
367                                         regulator-compatible = "LDO16";
368                                         regulator-name = "VHSIC_1.8V";
369                                         regulator-min-microvolt = <1800000>;
370                                         regulator-max-microvolt = <1800000>;
371                                         regulator-state-mem {
372                                                 regulator-on-in-suspend;
373                                         };
374                                 };
375
376                                 ldo17_reg: ldo17 {
377                                         regulator-compatible = "LDO17";
378                                         regulator-name = "CAM_SENSOR_CORE_1.2V";
379                                         regulator-min-microvolt = <1200000>;
380                                         regulator-max-microvolt = <1200000>;
381                                 };
382
383                                 ldo18_reg: ldo18 {
384                                         regulator-compatible = "LDO18";
385                                         regulator-name = "CAM_ISP_SEN_IO_1.8V";
386                                         regulator-min-microvolt = <1800000>;
387                                         regulator-max-microvolt = <1800000>;
388                                 };
389
390                                 ldo19_reg: ldo19 {
391                                         regulator-compatible = "LDO19";
392                                         regulator-name = "VT_CAM_1.8V";
393                                         regulator-min-microvolt = <1800000>;
394                                         regulator-max-microvolt = <1800000>;
395                                 };
396
397                                 ldo20_reg: ldo20 {
398                                         regulator-compatible = "LDO20";
399                                         regulator-name = "VDDQ_PRE_1.8V";
400                                         regulator-min-microvolt = <1800000>;
401                                         regulator-max-microvolt = <1800000>;
402                                 };
403
404                                 ldo21_reg: ldo21 {
405                                         regulator-compatible = "LDO21";
406                                         regulator-name = "VTF_2.8V";
407                                         regulator-min-microvolt = <2800000>;
408                                         regulator-max-microvolt = <2800000>;
409                                         maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
410                                 };
411
412                                 ldo22_reg: ldo22 {
413                                         regulator-compatible = "LDO22";
414                                         regulator-name = "VMEM_VDD_2.8V";
415                                         regulator-min-microvolt = <2800000>;
416                                         regulator-max-microvolt = <2800000>;
417                                         maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
418                                 };
419
420                                 ldo23_reg: ldo23 {
421                                         regulator-compatible = "LDO23";
422                                         regulator-name = "TSP_AVDD_3.3V";
423                                         regulator-min-microvolt = <3300000>;
424                                         regulator-max-microvolt = <3300000>;
425                                 };
426
427                                 ldo24_reg: ldo24 {
428                                         regulator-compatible = "LDO24";
429                                         regulator-name = "TSP_VDD_1.8V";
430                                         regulator-min-microvolt = <1800000>;
431                                         regulator-max-microvolt = <1800000>;
432                                 };
433
434                                 ldo25_reg: ldo25 {
435                                         regulator-compatible = "LDO25";
436                                         regulator-name = "LCD_VCC_3.3V";
437                                         regulator-min-microvolt = <2800000>;
438                                         regulator-max-microvolt = <2800000>;
439                                 };
440
441                                 ldo26_reg: ldo26 {
442                                         regulator-compatible = "LDO26";
443                                         regulator-name = "MOTOR_VCC_3.0V";
444                                         regulator-min-microvolt = <3000000>;
445                                         regulator-max-microvolt = <3000000>;
446                                 };
447
448                                 buck1_reg: buck1 {
449                                         regulator-compatible = "BUCK1";
450                                         regulator-name = "vdd_mif";
451                                         regulator-min-microvolt = <850000>;
452                                         regulator-max-microvolt = <1100000>;
453                                         regulator-always-on;
454                                         regulator-boot-on;
455                                         regulator-state-mem {
456                                                 regulator-off-in-suspend;
457                                         };
458                                 };
459
460                                 buck2_reg: buck2 {
461                                         regulator-compatible = "BUCK2";
462                                         regulator-name = "vdd_arm";
463                                         regulator-min-microvolt = <850000>;
464                                         regulator-max-microvolt = <1500000>;
465                                         regulator-always-on;
466                                         regulator-boot-on;
467                                         regulator-state-mem {
468                                                 regulator-on-in-suspend;
469                                         };
470                                 };
471
472                                 buck3_reg: buck3 {
473                                         regulator-compatible = "BUCK3";
474                                         regulator-name = "vdd_int";
475                                         regulator-min-microvolt = <850000>;
476                                         regulator-max-microvolt = <1150000>;
477                                         regulator-always-on;
478                                         regulator-boot-on;
479                                         regulator-state-mem {
480                                                 regulator-off-in-suspend;
481                                         };
482                                 };
483
484                                 buck4_reg: buck4 {
485                                         regulator-compatible = "BUCK4";
486                                         regulator-name = "vdd_g3d";
487                                         regulator-min-microvolt = <850000>;
488                                         regulator-max-microvolt = <1150000>;
489                                         regulator-boot-on;
490                                         regulator-state-mem {
491                                                 regulator-off-in-suspend;
492                                         };
493                                 };
494
495                                 buck5_reg: buck5 {
496                                         regulator-compatible = "BUCK5";
497                                         regulator-name = "VMEM_1.2V_AP";
498                                         regulator-min-microvolt = <1200000>;
499                                         regulator-max-microvolt = <1200000>;
500                                         regulator-always-on;
501                                 };
502
503                                 buck6_reg: buck6 {
504                                         regulator-compatible = "BUCK6";
505                                         regulator-name = "VCC_SUB_1.35V";
506                                         regulator-min-microvolt = <1350000>;
507                                         regulator-max-microvolt = <1350000>;
508                                         regulator-always-on;
509                                 };
510
511                                 buck7_reg: buck7 {
512                                         regulator-compatible = "BUCK7";
513                                         regulator-name = "VCC_SUB_2.0V";
514                                         regulator-min-microvolt = <2000000>;
515                                         regulator-max-microvolt = <2000000>;
516                                         regulator-always-on;
517                                 };
518
519                                 buck8_reg: buck8 {
520                                         regulator-compatible = "BUCK8";
521                                         regulator-name = "VMEM_VDDF_3.0V";
522                                         regulator-min-microvolt = <2850000>;
523                                         regulator-max-microvolt = <2850000>;
524                                         maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
525                                 };
526
527                                 buck9_reg: buck9 {
528                                         regulator-compatible = "BUCK9";
529                                         regulator-name = "CAM_ISP_CORE_1.2V";
530                                         regulator-min-microvolt = <1000000>;
531                                         regulator-max-microvolt = <1200000>;
532                                         maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
533                                 };
534                         };
535                 };
536         };
537
538         i2c_max77693: i2c-gpio-1 {
539                 compatible = "i2c-gpio";
540                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
541                 i2c-gpio,delay-us = <2>;
542                 #address-cells = <1>;
543                 #size-cells = <0>;
544                 status = "okay";
545
546                 max77693@66 {
547                         compatible = "maxim,max77693";
548                         interrupt-parent = <&gpx1>;
549                         interrupts = <5 2>;
550                         reg = <0x66>;
551
552                         regulators {
553                                 esafeout1_reg: ESAFEOUT1@1 {
554                                         regulator-name = "ESAFEOUT1";
555                                 };
556                                 esafeout2_reg: ESAFEOUT2@2 {
557                                         regulator-name = "ESAFEOUT2";
558                                 };
559                                 charger_reg: CHARGER@0 {
560                                         regulator-name = "CHARGER";
561                                         regulator-min-microamp = <60000>;
562                                         regulator-max-microamp = <2580000>;
563                                 };
564                         };
565
566                         max77693_haptic {
567                                 compatible = "maxim,max77693-haptic";
568                                 haptic-supply = <&ldo26_reg>;
569                                 pwms = <&pwm 0 38022 0>;
570                         };
571
572                         charger {
573                                 compatible = "maxim,max77693-charger";
574
575                                 maxim,constant-microvolt = <4350000>;
576                                 maxim,min-system-microvolt = <3600000>;
577                                 maxim,thermal-regulation-celsius = <100>;
578                                 maxim,battery-overcurrent-microamp = <3500000>;
579                                 maxim,charge-input-threshold-microvolt = <4300000>;
580                         };
581                 };
582         };
583
584         i2c_max77693_fuel: i2c-gpio-3 {
585                 compatible = "i2c-gpio";
586                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
587                 i2c-gpio,delay-us = <2>;
588                 #address-cells = <1>;
589                 #size-cells = <0>;
590                 status = "okay";
591
592                 max77693-fuel-gauge@36 {
593                         compatible = "maxim,max17047";
594                         interrupt-parent = <&gpx2>;
595                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
596                         reg = <0x36>;
597                 };
598         };
599
600         mmc@12550000 {
601                 num-slots = <1>;
602                 broken-cd;
603                 non-removable;
604                 card-detect-delay = <200>;
605                 vmmc-supply = <&ldo22_reg>;
606                 clock-frequency = <400000000>;
607                 samsung,dw-mshc-ciu-div = <0>;
608                 samsung,dw-mshc-sdr-timing = <2 3>;
609                 samsung,dw-mshc-ddr-timing = <1 2>;
610                 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
611                 pinctrl-names = "default";
612                 status = "okay";
613                 bus-width = <8>;
614                 cap-mmc-highspeed;
615         };
616
617         sdhci@12530000 {
618                 bus-width = <4>;
619                 cd-gpios = <&gpx3 4 0>;
620                 cd-inverted;
621                 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
622                 pinctrl-names = "default";
623                 vmmc-supply = <&ldo21_reg>;
624                 status = "okay";
625         };
626
627         serial@13800000 {
628                 status = "okay";
629         };
630
631         serial@13810000 {
632                 status = "okay";
633         };
634
635         serial@13820000 {
636                 status = "okay";
637         };
638
639         serial@13830000 {
640                 status = "okay";
641         };
642
643         tmu@100C0000 {
644                 vtmu-supply = <&ldo10_reg>;
645                 status = "okay";
646         };
647
648         i2c_ak8975: i2c-gpio-0 {
649                 compatible = "i2c-gpio";
650                 gpios = <&gpy2 4 0>, <&gpy2 5 0>;
651                 i2c-gpio,delay-us = <2>;
652                 #address-cells = <1>;
653                 #size-cells = <0>;
654                 status = "okay";
655
656                 ak8975@0c {
657                         compatible = "asahi-kasei,ak8975";
658                         reg = <0x0c>;
659                         gpios = <&gpj0 7 0>;
660                 };
661         };
662
663         i2c_cm36651: i2c-gpio-2 {
664                 compatible = "i2c-gpio";
665                 gpios = <&gpf0 0 1>, <&gpf0 1 1>;
666                 i2c-gpio,delay-us = <2>;
667                 #address-cells = <1>;
668                 #size-cells = <0>;
669
670                 cm36651@18 {
671                         compatible = "capella,cm36651";
672                         reg = <0x18>;
673                         interrupt-parent = <&gpx0>;
674                         interrupts = <2 2>;
675                         vled-supply = <&ps_als_reg>;
676                 };
677         };
678
679         spi_1: spi@13930000 {
680                 pinctrl-names = "default";
681                 pinctrl-0 = <&spi1_bus>;
682                 cs-gpios = <&gpb 5 0>;
683                 status = "okay";
684
685                 s5c73m3_spi: s5c73m3 {
686                         compatible = "samsung,s5c73m3";
687                         spi-max-frequency = <50000000>;
688                         reg = <0>;
689                         controller-data {
690                                 samsung,spi-feedback-delay = <2>;
691                         };
692                 };
693         };
694
695         pwm: pwm@139D0000 {
696                 pinctrl-0 = <&pwm0_out>;
697                 pinctrl-names = "default";
698                 samsung,pwm-outputs = <0>;
699                 status = "okay";
700         };
701
702         dsi_0: dsi@11C80000 {
703                 vddcore-supply = <&ldo8_reg>;
704                 vddio-supply = <&ldo10_reg>;
705                 samsung,pll-clock-frequency = <24000000>;
706                 status = "okay";
707
708                 ports {
709                         #address-cells = <1>;
710                         #size-cells = <0>;
711
712                         port@1 {
713                                 reg = <1>;
714
715                                 dsi_out: endpoint {
716                                         remote-endpoint = <&dsi_in>;
717                                         samsung,burst-clock-frequency = <500000000>;
718                                         samsung,esc-clock-frequency = <20000000>;
719                                 };
720                         };
721                 };
722
723                 panel@0 {
724                         compatible = "samsung,s6e8aa0";
725                         reg = <0>;
726                         vdd3-supply = <&lcd_vdd3_reg>;
727                         vci-supply = <&ldo25_reg>;
728                         reset-gpios = <&gpy4 5 0>;
729                         power-on-delay= <50>;
730                         reset-delay = <100>;
731                         init-delay = <100>;
732                         flip-horizontal;
733                         flip-vertical;
734                         panel-width-mm = <58>;
735                         panel-height-mm = <103>;
736
737                         display-timings {
738                                 timing-0 {
739                                         clock-frequency = <0>;
740                                         hactive = <720>;
741                                         vactive = <1280>;
742                                         hfront-porch = <5>;
743                                         hback-porch = <5>;
744                                         hsync-len = <5>;
745                                         vfront-porch = <13>;
746                                         vback-porch = <1>;
747                                         vsync-len = <2>;
748                                 };
749                         };
750
751                         port {
752                                 dsi_in: endpoint {
753                                         remote-endpoint = <&dsi_out>;
754                                 };
755                         };
756                 };
757         };
758
759         fimd@11c00000 {
760                 status = "okay";
761         };
762
763         camera: camera {
764                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
765                 pinctrl-names = "default";
766                 status = "okay";
767                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
768                                   <&clock CLK_MOUT_CAM1>;
769                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
770                                          <&clock CLK_XUSBXTI>;
771
772                 fimc_0: fimc@11800000 {
773                         status = "okay";
774                         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
775                                         <&clock CLK_SCLK_FIMC0>;
776                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
777                         assigned-clock-rates = <0>, <176000000>;
778                 };
779
780                 fimc_1: fimc@11810000 {
781                         status = "okay";
782                         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
783                                         <&clock CLK_SCLK_FIMC1>;
784                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
785                         assigned-clock-rates = <0>, <176000000>;
786                 };
787
788                 fimc_2: fimc@11820000 {
789                         status = "okay";
790                         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
791                                         <&clock CLK_SCLK_FIMC2>;
792                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
793                         assigned-clock-rates = <0>, <176000000>;
794                 };
795
796                 fimc_3: fimc@11830000 {
797                         status = "okay";
798                         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
799                                         <&clock CLK_SCLK_FIMC3>;
800                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
801                         assigned-clock-rates = <0>, <176000000>;
802                 };
803
804                 csis_0: csis@11880000 {
805                         status = "okay";
806                         vddcore-supply = <&ldo8_reg>;
807                         vddio-supply = <&ldo10_reg>;
808                         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
809                                         <&clock CLK_SCLK_CSIS0>;
810                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
811                         assigned-clock-rates = <0>, <176000000>;
812
813                         /* Camera C (3) MIPI CSI-2 (CSIS0) */
814                         port@3 {
815                                 reg = <3>;
816                                 csis0_ep: endpoint {
817                                         remote-endpoint = <&s5c73m3_ep>;
818                                         data-lanes = <1 2 3 4>;
819                                         samsung,csis-hs-settle = <12>;
820                                 };
821                         };
822                 };
823
824                 csis_1: csis@11890000 {
825                         status = "okay";
826                         vddcore-supply = <&ldo8_reg>;
827                         vddio-supply = <&ldo10_reg>;
828                         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
829                                         <&clock CLK_SCLK_CSIS1>;
830                         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
831                         assigned-clock-rates = <0>, <176000000>;
832
833                         /* Camera D (4) MIPI CSI-2 (CSIS1) */
834                         port@4 {
835                                 reg = <4>;
836                                 csis1_ep: endpoint {
837                                         remote-endpoint = <&is_s5k6a3_ep>;
838                                         data-lanes = <1>;
839                                         samsung,csis-hs-settle = <18>;
840                                         samsung,csis-wclk;
841                                 };
842                         };
843                 };
844
845                 fimc_lite_0: fimc-lite@12390000 {
846                         status = "okay";
847                 };
848
849                 fimc_lite_1: fimc-lite@123A0000 {
850                         status = "okay";
851                 };
852
853                 fimc-is@12000000 {
854                         pinctrl-0 = <&fimc_is_uart>;
855                         pinctrl-names = "default";
856                         status = "okay";
857
858                         i2c1_isp: i2c-isp@12140000 {
859                                 pinctrl-0 = <&fimc_is_i2c1>;
860                                 pinctrl-names = "default";
861
862                                 s5k6a3@10 {
863                                         compatible = "samsung,s5k6a3";
864                                         reg = <0x10>;
865                                         svdda-supply = <&cam_io_reg>;
866                                         svddio-supply = <&ldo19_reg>;
867                                         afvdd-supply = <&ldo19_reg>;
868                                         clock-frequency = <24000000>;
869                                         /* CAM_B_CLKOUT */
870                                         clocks = <&camera 1>;
871                                         clock-names = "extclk";
872                                         samsung,camclk-out = <1>;
873                                         gpios = <&gpm1 6 0>;
874
875                                         port {
876                                                 is_s5k6a3_ep: endpoint {
877                                                         remote-endpoint = <&csis1_ep>;
878                                                         data-lanes = <1>;
879                                                 };
880                                         };
881                                 };
882                         };
883                 };
884         };
885
886         i2s0: i2s@03830000 {
887                 pinctrl-0 = <&i2s0_bus>;
888                 pinctrl-names = "default";
889                 status = "okay";
890         };
891
892         sound {
893                 compatible = "samsung,trats2-audio";
894                 samsung,i2s-controller = <&i2s0>;
895                 samsung,model = "Trats2";
896                 samsung,audio-codec = <&wm1811>;
897                 samsung,audio-routing =
898                         "SPK", "SPKOUTLN",
899                         "SPK", "SPKOUTLP",
900                         "SPK", "SPKOUTRN",
901                         "SPK", "SPKOUTRP";
902         };
903
904         exynos-usbphy@125B0000 {
905                 status = "okay";
906         };
907
908         hsotg@12480000 {
909                 vusb_d-supply = <&ldo15_reg>;
910                 vusb_a-supply = <&ldo12_reg>;
911                 dr_mode = "peripheral";
912                 status = "okay";
913         };
914
915         thermistor-ap@0 {
916                 compatible = "ntc,ncp15wb473";
917                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
918                 pullup-ohm = <100000>;   /* 100K */
919                 pulldown-ohm = <100000>; /* 100K */
920                 io-channels = <&adc 1>;  /* AP temperature */
921         };
922
923         thermistor-battery@1 {
924                 compatible = "ntc,ncp15wb473";
925                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
926                 pullup-ohm = <100000>;   /* 100K */
927                 pulldown-ohm = <100000>; /* 100K */
928                 io-channels = <&adc 2>;  /* Battery temperature */
929         };
930
931         thermal-zones {
932                 cpu_thermal: cpu-thermal {
933                         cooling-maps {
934                                 map0 {
935                                      /* Corresponds to 800MHz at freq_table */
936                                      cooling-device = <&cpu0 7 7>;
937                                 };
938                                 map1 {
939                                      /* Corresponds to 200MHz at freq_table */
940                                      cooling-device = <&cpu0 13 13>;
941                                };
942                        };
943                 };
944         };
945 };
946
947 &pmu_system_controller {
948         assigned-clocks = <&pmu_system_controller 0>;
949         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
950 };
951
952 &ppmu_dmc0 {
953         status = "okay";
954
955         events {
956                 ppmu_dmc0_3: ppmu-event3-dmc0 {
957                         event-name = "ppmu-event3-dmc0";
958                 };
959         };
960 };
961
962 &ppmu_dmc1 {
963         status = "okay";
964
965         events {
966                 ppmu_dmc1_3: ppmu-event3-dmc1 {
967                         event-name = "ppmu-event3-dmc1";
968                 };
969         };
970 };
971
972 &ppmu_leftbus {
973         status = "okay";
974
975         events {
976                 ppmu_leftbus_3: ppmu-event3-leftbus {
977                         event-name = "ppmu-event3-leftbus";
978                 };
979         };
980 };
981
982 &ppmu_rightbus {
983         status = "okay";
984
985         events {
986                 ppmu_rightbus_3: ppmu-event3-rightbus {
987                         event-name = "ppmu-event3-rightbus";
988                 };
989         };
990 };
991
992 &pinctrl_0 {
993         pinctrl-names = "default";
994         pinctrl-0 = <&sleep0>;
995
996         sleep0: sleep-states {
997                 PIN_SLP(gpa0-0, INPUT, NONE);
998                 PIN_SLP(gpa0-1, OUT0, NONE);
999                 PIN_SLP(gpa0-2, INPUT, NONE);
1000                 PIN_SLP(gpa0-3, INPUT, UP);
1001                 PIN_SLP(gpa0-4, INPUT, NONE);
1002                 PIN_SLP(gpa0-5, INPUT, DOWN);
1003                 PIN_SLP(gpa0-6, INPUT, DOWN);
1004                 PIN_SLP(gpa0-7, INPUT, UP);
1005
1006                 PIN_SLP(gpa1-0, INPUT, DOWN);
1007                 PIN_SLP(gpa1-1, INPUT, DOWN);
1008                 PIN_SLP(gpa1-2, INPUT, DOWN);
1009                 PIN_SLP(gpa1-3, INPUT, DOWN);
1010                 PIN_SLP(gpa1-4, INPUT, DOWN);
1011                 PIN_SLP(gpa1-5, INPUT, DOWN);
1012
1013                 PIN_SLP(gpb-0, INPUT, NONE);
1014                 PIN_SLP(gpb-1, INPUT, NONE);
1015                 PIN_SLP(gpb-2, INPUT, NONE);
1016                 PIN_SLP(gpb-3, INPUT, NONE);
1017                 PIN_SLP(gpb-4, INPUT, DOWN);
1018                 PIN_SLP(gpb-5, INPUT, UP);
1019                 PIN_SLP(gpb-6, INPUT, DOWN);
1020                 PIN_SLP(gpb-7, INPUT, DOWN);
1021
1022                 PIN_SLP(gpc0-0, INPUT, DOWN);
1023                 PIN_SLP(gpc0-1, INPUT, DOWN);
1024                 PIN_SLP(gpc0-2, INPUT, DOWN);
1025                 PIN_SLP(gpc0-3, INPUT, DOWN);
1026                 PIN_SLP(gpc0-4, INPUT, DOWN);
1027
1028                 PIN_SLP(gpc1-0, INPUT, NONE);
1029                 PIN_SLP(gpc1-1, PREV, NONE);
1030                 PIN_SLP(gpc1-2, INPUT, NONE);
1031                 PIN_SLP(gpc1-3, INPUT, NONE);
1032                 PIN_SLP(gpc1-4, INPUT, NONE);
1033
1034                 PIN_SLP(gpd0-0, INPUT, DOWN);
1035                 PIN_SLP(gpd0-1, INPUT, DOWN);
1036                 PIN_SLP(gpd0-2, INPUT, NONE);
1037                 PIN_SLP(gpd0-3, INPUT, NONE);
1038
1039                 PIN_SLP(gpd1-0, INPUT, DOWN);
1040                 PIN_SLP(gpd1-1, INPUT, DOWN);
1041                 PIN_SLP(gpd1-2, INPUT, NONE);
1042                 PIN_SLP(gpd1-3, INPUT, NONE);
1043
1044                 PIN_SLP(gpf0-0, INPUT, NONE);
1045                 PIN_SLP(gpf0-1, INPUT, NONE);
1046                 PIN_SLP(gpf0-2, INPUT, DOWN);
1047                 PIN_SLP(gpf0-3, INPUT, DOWN);
1048                 PIN_SLP(gpf0-4, INPUT, NONE);
1049                 PIN_SLP(gpf0-5, INPUT, DOWN);
1050                 PIN_SLP(gpf0-6, INPUT, NONE);
1051                 PIN_SLP(gpf0-7, INPUT, DOWN);
1052
1053                 PIN_SLP(gpf1-0, INPUT, DOWN);
1054                 PIN_SLP(gpf1-1, INPUT, DOWN);
1055                 PIN_SLP(gpf1-2, INPUT, DOWN);
1056                 PIN_SLP(gpf1-3, INPUT, DOWN);
1057                 PIN_SLP(gpf1-4, INPUT, NONE);
1058                 PIN_SLP(gpf1-5, INPUT, NONE);
1059                 PIN_SLP(gpf1-6, INPUT, DOWN);
1060                 PIN_SLP(gpf1-7, PREV, NONE);
1061
1062                 PIN_SLP(gpf2-0, PREV, NONE);
1063                 PIN_SLP(gpf2-1, INPUT, DOWN);
1064                 PIN_SLP(gpf2-2, INPUT, DOWN);
1065                 PIN_SLP(gpf2-3, INPUT, DOWN);
1066                 PIN_SLP(gpf2-4, INPUT, DOWN);
1067                 PIN_SLP(gpf2-5, INPUT, DOWN);
1068                 PIN_SLP(gpf2-6, INPUT, NONE);
1069                 PIN_SLP(gpf2-7, INPUT, NONE);
1070
1071                 PIN_SLP(gpf3-0, INPUT, NONE);
1072                 PIN_SLP(gpf3-1, PREV, NONE);
1073                 PIN_SLP(gpf3-2, PREV, NONE);
1074                 PIN_SLP(gpf3-3, PREV, NONE);
1075                 PIN_SLP(gpf3-4, OUT1, NONE);
1076                 PIN_SLP(gpf3-5, INPUT, DOWN);
1077
1078                 PIN_SLP(gpj0-0, PREV, NONE);
1079                 PIN_SLP(gpj0-1, PREV, NONE);
1080                 PIN_SLP(gpj0-2, PREV, NONE);
1081                 PIN_SLP(gpj0-3, INPUT, DOWN);
1082                 PIN_SLP(gpj0-4, PREV, NONE);
1083                 PIN_SLP(gpj0-5, PREV, NONE);
1084                 PIN_SLP(gpj0-6, INPUT, DOWN);
1085                 PIN_SLP(gpj0-7, INPUT, DOWN);
1086
1087                 PIN_SLP(gpj1-0, INPUT, DOWN);
1088                 PIN_SLP(gpj1-1, PREV, NONE);
1089                 PIN_SLP(gpj1-2, PREV, NONE);
1090                 PIN_SLP(gpj1-3, INPUT, DOWN);
1091                 PIN_SLP(gpj1-4, INPUT, DOWN);
1092         };
1093 };
1094
1095 &pinctrl_1 {
1096         pinctrl-names = "default";
1097         pinctrl-0 = <&sleep1>;
1098
1099         sleep1: sleep-states {
1100                 PIN_SLP(gpk0-0, PREV, NONE);
1101                 PIN_SLP(gpk0-1, PREV, NONE);
1102                 PIN_SLP(gpk0-2, OUT0, NONE);
1103                 PIN_SLP(gpk0-3, PREV, NONE);
1104                 PIN_SLP(gpk0-4, PREV, NONE);
1105                 PIN_SLP(gpk0-5, PREV, NONE);
1106                 PIN_SLP(gpk0-6, PREV, NONE);
1107
1108                 PIN_SLP(gpk1-0, INPUT, DOWN);
1109                 PIN_SLP(gpk1-1, INPUT, DOWN);
1110                 PIN_SLP(gpk1-2, INPUT, DOWN);
1111                 PIN_SLP(gpk1-3, PREV, NONE);
1112                 PIN_SLP(gpk1-4, PREV, NONE);
1113                 PIN_SLP(gpk1-5, PREV, NONE);
1114                 PIN_SLP(gpk1-6, PREV, NONE);
1115
1116                 PIN_SLP(gpk2-0, INPUT, DOWN);
1117                 PIN_SLP(gpk2-1, INPUT, DOWN);
1118                 PIN_SLP(gpk2-2, INPUT, DOWN);
1119                 PIN_SLP(gpk2-3, INPUT, DOWN);
1120                 PIN_SLP(gpk2-4, INPUT, DOWN);
1121                 PIN_SLP(gpk2-5, INPUT, DOWN);
1122                 PIN_SLP(gpk2-6, INPUT, DOWN);
1123
1124                 PIN_SLP(gpk3-0, OUT0, NONE);
1125                 PIN_SLP(gpk3-1, INPUT, NONE);
1126                 PIN_SLP(gpk3-2, INPUT, DOWN);
1127                 PIN_SLP(gpk3-3, INPUT, NONE);
1128                 PIN_SLP(gpk3-4, INPUT, NONE);
1129                 PIN_SLP(gpk3-5, INPUT, NONE);
1130                 PIN_SLP(gpk3-6, INPUT, NONE);
1131
1132                 PIN_SLP(gpl0-0, INPUT, DOWN);
1133                 PIN_SLP(gpl0-1, INPUT, DOWN);
1134                 PIN_SLP(gpl0-2, INPUT, DOWN);
1135                 PIN_SLP(gpl0-3, INPUT, DOWN);
1136                 PIN_SLP(gpl0-4, PREV, NONE);
1137                 PIN_SLP(gpl0-6, PREV, NONE);
1138
1139                 PIN_SLP(gpl1-0, INPUT, DOWN);
1140                 PIN_SLP(gpl1-1, INPUT, DOWN);
1141                 PIN_SLP(gpl2-0, INPUT, DOWN);
1142                 PIN_SLP(gpl2-1, INPUT, DOWN);
1143                 PIN_SLP(gpl2-2, INPUT, DOWN);
1144                 PIN_SLP(gpl2-3, INPUT, DOWN);
1145                 PIN_SLP(gpl2-4, INPUT, DOWN);
1146                 PIN_SLP(gpl2-5, INPUT, DOWN);
1147                 PIN_SLP(gpl2-6, PREV, NONE);
1148                 PIN_SLP(gpl2-7, INPUT, DOWN);
1149
1150                 PIN_SLP(gpm0-0, INPUT, DOWN);
1151                 PIN_SLP(gpm0-1, INPUT, DOWN);
1152                 PIN_SLP(gpm0-2, INPUT, DOWN);
1153                 PIN_SLP(gpm0-3, INPUT, DOWN);
1154                 PIN_SLP(gpm0-4, INPUT, DOWN);
1155                 PIN_SLP(gpm0-5, INPUT, DOWN);
1156                 PIN_SLP(gpm0-6, INPUT, DOWN);
1157                 PIN_SLP(gpm0-7, INPUT, DOWN);
1158
1159                 PIN_SLP(gpm1-0, INPUT, DOWN);
1160                 PIN_SLP(gpm1-1, INPUT, DOWN);
1161                 PIN_SLP(gpm1-2, INPUT, NONE);
1162                 PIN_SLP(gpm1-3, INPUT, NONE);
1163                 PIN_SLP(gpm1-4, INPUT, NONE);
1164                 PIN_SLP(gpm1-5, INPUT, NONE);
1165                 PIN_SLP(gpm1-6, INPUT, DOWN);
1166
1167                 PIN_SLP(gpm2-0, INPUT, NONE);
1168                 PIN_SLP(gpm2-1, INPUT, NONE);
1169                 PIN_SLP(gpm2-2, INPUT, DOWN);
1170                 PIN_SLP(gpm2-3, INPUT, DOWN);
1171                 PIN_SLP(gpm2-4, INPUT, DOWN);
1172
1173                 PIN_SLP(gpm3-0, PREV, NONE);
1174                 PIN_SLP(gpm3-1, PREV, NONE);
1175                 PIN_SLP(gpm3-2, PREV, NONE);
1176                 PIN_SLP(gpm3-3, OUT1, NONE);
1177                 PIN_SLP(gpm3-4, INPUT, DOWN);
1178                 PIN_SLP(gpm3-5, INPUT, DOWN);
1179                 PIN_SLP(gpm3-6, INPUT, DOWN);
1180                 PIN_SLP(gpm3-7, INPUT, DOWN);
1181
1182                 PIN_SLP(gpm4-0, INPUT, DOWN);
1183                 PIN_SLP(gpm4-1, INPUT, DOWN);
1184                 PIN_SLP(gpm4-2, INPUT, DOWN);
1185                 PIN_SLP(gpm4-3, INPUT, DOWN);
1186                 PIN_SLP(gpm4-4, INPUT, DOWN);
1187                 PIN_SLP(gpm4-5, INPUT, DOWN);
1188                 PIN_SLP(gpm4-6, INPUT, DOWN);
1189                 PIN_SLP(gpm4-7, INPUT, DOWN);
1190
1191                 PIN_SLP(gpy0-0, INPUT, DOWN);
1192                 PIN_SLP(gpy0-1, INPUT, DOWN);
1193                 PIN_SLP(gpy0-2, INPUT, DOWN);
1194                 PIN_SLP(gpy0-3, INPUT, DOWN);
1195                 PIN_SLP(gpy0-4, INPUT, DOWN);
1196                 PIN_SLP(gpy0-5, INPUT, DOWN);
1197
1198                 PIN_SLP(gpy1-0, INPUT, DOWN);
1199                 PIN_SLP(gpy1-1, INPUT, DOWN);
1200                 PIN_SLP(gpy1-2, INPUT, DOWN);
1201                 PIN_SLP(gpy1-3, INPUT, DOWN);
1202
1203                 PIN_SLP(gpy2-0, PREV, NONE);
1204                 PIN_SLP(gpy2-1, INPUT, DOWN);
1205                 PIN_SLP(gpy2-2, INPUT, NONE);
1206                 PIN_SLP(gpy2-3, INPUT, NONE);
1207                 PIN_SLP(gpy2-4, INPUT, NONE);
1208                 PIN_SLP(gpy2-5, INPUT, NONE);
1209
1210                 PIN_SLP(gpy3-0, INPUT, DOWN);
1211                 PIN_SLP(gpy3-1, INPUT, DOWN);
1212                 PIN_SLP(gpy3-2, INPUT, DOWN);
1213                 PIN_SLP(gpy3-3, INPUT, DOWN);
1214                 PIN_SLP(gpy3-4, INPUT, DOWN);
1215                 PIN_SLP(gpy3-5, INPUT, DOWN);
1216                 PIN_SLP(gpy3-6, INPUT, DOWN);
1217                 PIN_SLP(gpy3-7, INPUT, DOWN);
1218
1219                 PIN_SLP(gpy4-0, INPUT, DOWN);
1220                 PIN_SLP(gpy4-1, INPUT, DOWN);
1221                 PIN_SLP(gpy4-2, INPUT, DOWN);
1222                 PIN_SLP(gpy4-3, INPUT, DOWN);
1223                 PIN_SLP(gpy4-4, INPUT, DOWN);
1224                 PIN_SLP(gpy4-5, INPUT, DOWN);
1225                 PIN_SLP(gpy4-6, INPUT, DOWN);
1226                 PIN_SLP(gpy4-7, INPUT, DOWN);
1227
1228                 PIN_SLP(gpy5-0, INPUT, DOWN);
1229                 PIN_SLP(gpy5-1, INPUT, DOWN);
1230                 PIN_SLP(gpy5-2, INPUT, DOWN);
1231                 PIN_SLP(gpy5-3, INPUT, DOWN);
1232                 PIN_SLP(gpy5-4, INPUT, DOWN);
1233                 PIN_SLP(gpy5-5, INPUT, DOWN);
1234                 PIN_SLP(gpy5-6, INPUT, DOWN);
1235                 PIN_SLP(gpy5-7, INPUT, DOWN);
1236
1237                 PIN_SLP(gpy6-0, INPUT, DOWN);
1238                 PIN_SLP(gpy6-1, INPUT, DOWN);
1239                 PIN_SLP(gpy6-2, INPUT, DOWN);
1240                 PIN_SLP(gpy6-3, INPUT, DOWN);
1241                 PIN_SLP(gpy6-4, INPUT, DOWN);
1242                 PIN_SLP(gpy6-5, INPUT, DOWN);
1243                 PIN_SLP(gpy6-6, INPUT, DOWN);
1244                 PIN_SLP(gpy6-7, INPUT, DOWN);
1245         };
1246 };
1247
1248 &pinctrl_2 {
1249         pinctrl-names = "default";
1250         pinctrl-0 = <&sleep2>;
1251
1252         sleep2: sleep-states {
1253                 PIN_SLP(gpz-0, INPUT, DOWN);
1254                 PIN_SLP(gpz-1, INPUT, DOWN);
1255                 PIN_SLP(gpz-2, INPUT, DOWN);
1256                 PIN_SLP(gpz-3, INPUT, DOWN);
1257                 PIN_SLP(gpz-4, INPUT, DOWN);
1258                 PIN_SLP(gpz-5, INPUT, DOWN);
1259                 PIN_SLP(gpz-6, INPUT, DOWN);
1260         };
1261 };
1262
1263 &pinctrl_3 {
1264         pinctrl-names = "default";
1265         pinctrl-0 = <&sleep3>;
1266
1267         sleep3: sleep-states {
1268                 PIN_SLP(gpv0-0, INPUT, DOWN);
1269                 PIN_SLP(gpv0-1, INPUT, DOWN);
1270                 PIN_SLP(gpv0-2, INPUT, DOWN);
1271                 PIN_SLP(gpv0-3, INPUT, DOWN);
1272                 PIN_SLP(gpv0-4, INPUT, DOWN);
1273                 PIN_SLP(gpv0-5, INPUT, DOWN);
1274                 PIN_SLP(gpv0-6, INPUT, DOWN);
1275                 PIN_SLP(gpv0-7, INPUT, DOWN);
1276
1277                 PIN_SLP(gpv1-0, INPUT, DOWN);
1278                 PIN_SLP(gpv1-1, INPUT, DOWN);
1279                 PIN_SLP(gpv1-2, INPUT, DOWN);
1280                 PIN_SLP(gpv1-3, INPUT, DOWN);
1281                 PIN_SLP(gpv1-4, INPUT, DOWN);
1282                 PIN_SLP(gpv1-5, INPUT, DOWN);
1283                 PIN_SLP(gpv1-6, INPUT, DOWN);
1284                 PIN_SLP(gpv1-7, INPUT, DOWN);
1285
1286                 PIN_SLP(gpv2-0, INPUT, DOWN);
1287                 PIN_SLP(gpv2-1, INPUT, DOWN);
1288                 PIN_SLP(gpv2-2, INPUT, DOWN);
1289                 PIN_SLP(gpv2-3, INPUT, DOWN);
1290                 PIN_SLP(gpv2-4, INPUT, DOWN);
1291                 PIN_SLP(gpv2-5, INPUT, DOWN);
1292                 PIN_SLP(gpv2-6, INPUT, DOWN);
1293                 PIN_SLP(gpv2-7, INPUT, DOWN);
1294
1295                 PIN_SLP(gpv3-0, INPUT, DOWN);
1296                 PIN_SLP(gpv3-1, INPUT, DOWN);
1297                 PIN_SLP(gpv3-2, INPUT, DOWN);
1298                 PIN_SLP(gpv3-3, INPUT, DOWN);
1299                 PIN_SLP(gpv3-4, INPUT, DOWN);
1300                 PIN_SLP(gpv3-5, INPUT, DOWN);
1301                 PIN_SLP(gpv3-6, INPUT, DOWN);
1302                 PIN_SLP(gpv3-7, INPUT, DOWN);
1303
1304                 PIN_SLP(gpv4-0, INPUT, DOWN);
1305         };
1306 };