Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / exynos4412-midas.dtsi
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Samsung's Exynos4412 based Trats 2 board device tree source
4  *
5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6  *              http://www.samsung.com
7  *
8  * Device tree source file for Samsung's Trats 2 board which is based on
9  * Samsung's Exynos4412 SoC.
10  */
11
12 /dts-v1/;
13 #include "exynos4412.dtsi"
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/interrupt-controller/irq.h>
17 #include <dt-bindings/clock/maxim,max77686.h>
18 #include <dt-bindings/pinctrl/samsung.h>
19
20 / {
21         compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
22
23         aliases {
24                 i2c11 = &i2c_max77693;
25                 i2c12 = &i2c_max77693_fuel;
26         };
27
28         chosen {
29                 stdout-path = &serial_2;
30         };
31
32         firmware@204f000 {
33                 compatible = "samsung,secure-firmware";
34                 reg = <0x0204F000 0x1000>;
35         };
36
37         fixed-rate-clocks {
38                 xxti {
39                         compatible = "samsung,clock-xxti", "fixed-clock";
40                         clock-frequency = <0>;
41                 };
42
43                 xusbxti {
44                         compatible = "samsung,clock-xusbxti", "fixed-clock";
45                         clock-frequency = <24000000>;
46                 };
47         };
48
49         cam_io_reg: voltage-regulator-1 {
50                 compatible = "regulator-fixed";
51                 regulator-name = "CAM_SENSOR_A";
52                 regulator-min-microvolt = <2800000>;
53                 regulator-max-microvolt = <2800000>;
54                 enable-active-high;
55                 status = "disabled";
56         };
57
58         cam_af_reg: voltage-regulator-2 {
59                 compatible = "regulator-fixed";
60                 regulator-name = "CAM_AF";
61                 regulator-min-microvolt = <2800000>;
62                 regulator-max-microvolt = <2800000>;
63                 enable-active-high;
64                 status = "disabled";
65         };
66
67         vsil12: voltage-regulator-3 {
68                 compatible = "regulator-fixed";
69                 regulator-name = "VSIL_1.2V";
70                 regulator-min-microvolt = <1200000>;
71                 regulator-max-microvolt = <1200000>;
72                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
73                 enable-active-high;
74                 vin-supply = <&buck7_reg>;
75         };
76
77         vcc33mhl: voltage-regulator-4 {
78                 compatible = "regulator-fixed";
79                 regulator-name = "VCC_3.3_MHL";
80                 regulator-min-microvolt = <3300000>;
81                 regulator-max-microvolt = <3300000>;
82                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
83                 enable-active-high;
84         };
85
86         vcc18mhl: voltage-regulator-5 {
87                 compatible = "regulator-fixed";
88                 regulator-name = "VCC_1.8_MHL";
89                 regulator-min-microvolt = <1800000>;
90                 regulator-max-microvolt = <1800000>;
91                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
92                 enable-active-high;
93         };
94
95         gpio-keys {
96                 compatible = "gpio-keys";
97                 pinctrl-names = "default";
98                 pinctrl-0 = <&gpio_keys>;
99
100                 key-down {
101                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
102                         linux,code = <114>;
103                         label = "volume down";
104                         debounce-interval = <10>;
105                 };
106
107                 key-up {
108                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
109                         linux,code = <115>;
110                         label = "volume up";
111                         debounce-interval = <10>;
112                 };
113
114                 key-power {
115                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
116                         linux,code = <116>;
117                         label = "power";
118                         debounce-interval = <10>;
119                         wakeup-source;
120                 };
121
122                 key-ok {
123                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
124                         linux,code = <139>;
125                         label = "ok";
126                         debounce-interval = <10>;
127                         wakeup-source;
128                 };
129         };
130
131         i2c_max77693: i2c-gpio-1 {
132                 compatible = "i2c-gpio";
133                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
134                 i2c-gpio,delay-us = <2>;
135                 #address-cells = <1>;
136                 #size-cells = <0>;
137                 status = "okay";
138
139                 max77693@66 {
140                         compatible = "maxim,max77693";
141                         interrupt-parent = <&gpx1>;
142                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
143                         pinctrl-names = "default";
144                         pinctrl-0 = <&max77693_irq>;
145                         reg = <0x66>;
146
147                         regulators {
148                                 esafeout1_reg: ESAFEOUT1 {
149                                         regulator-name = "ESAFEOUT1";
150                                 };
151                                 esafeout2_reg: ESAFEOUT2 {
152                                         regulator-name = "ESAFEOUT2";
153                                 };
154                                 charger_reg: CHARGER {
155                                         regulator-name = "CHARGER";
156                                         regulator-min-microamp = <60000>;
157                                         regulator-max-microamp = <2580000>;
158                                 };
159                         };
160
161                         max77693_haptic {
162                                 compatible = "maxim,max77693-haptic";
163                                 haptic-supply = <&ldo26_reg>;
164                                 pwms = <&pwm 0 38022 0>;
165                         };
166
167                         charger {
168                                 compatible = "maxim,max77693-charger";
169
170                                 maxim,constant-microvolt = <4350000>;
171                                 maxim,min-system-microvolt = <3600000>;
172                                 maxim,thermal-regulation-celsius = <100>;
173                                 maxim,battery-overcurrent-microamp = <3500000>;
174                                 maxim,charge-input-threshold-microvolt = <4300000>;
175                         };
176                 };
177         };
178
179         i2c_max77693_fuel: i2c-gpio-3 {
180                 compatible = "i2c-gpio";
181                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
182                 i2c-gpio,delay-us = <2>;
183                 #address-cells = <1>;
184                 #size-cells = <0>;
185                 status = "okay";
186
187                 max77693-fuel-gauge@36 {
188                         compatible = "maxim,max17047";
189                         interrupt-parent = <&gpx2>;
190                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
191                         pinctrl-names = "default";
192                         pinctrl-0 = <&max77693_fuel_irq>;
193                         reg = <0x36>;
194
195                         maxim,over-heat-temp = <700>;
196                         maxim,over-volt = <4500>;
197                 };
198         };
199
200         i2c-mhl {
201                 compatible = "i2c-gpio";
202                 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
203                 i2c-gpio,delay-us = <100>;
204                 #address-cells = <1>;
205                 #size-cells = <0>;
206
207                 pinctrl-0 = <&i2c_mhl_bus>;
208                 pinctrl-names = "default";
209                 status = "okay";
210
211                 sii9234: hdmi-bridge@39 {
212                         compatible = "sil,sii9234";
213                         avcc33-supply = <&vcc33mhl>;
214                         iovcc18-supply = <&vcc18mhl>;
215                         avcc12-supply = <&vsil12>;
216                         cvcc12-supply = <&vsil12>;
217                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
218                         interrupt-parent = <&gpf3>;
219                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
220                         reg = <0x39>;
221
222                         port {
223                                 mhl_to_hdmi: endpoint {
224                                         remote-endpoint = <&hdmi_to_mhl>;
225                                 };
226                         };
227                 };
228         };
229
230         wlan_pwrseq: sdhci3-pwrseq {
231                 compatible = "mmc-pwrseq-simple";
232                 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
233                 clocks = <&max77686 MAX77686_CLK_PMIC>;
234                 clock-names = "ext_clock";
235         };
236
237         sound {
238                 compatible = "samsung,trats2-audio";
239                 samsung,i2s-controller = <&i2s0>;
240                 samsung,model = "Trats2";
241                 samsung,audio-codec = <&wm1811>;
242                 samsung,audio-routing =
243                         "SPK", "SPKOUTLN",
244                         "SPK", "SPKOUTLP",
245                         "SPK", "SPKOUTRN",
246                         "SPK", "SPKOUTRP";
247         };
248
249         thermistor-ap {
250                 compatible = "murata,ncp15wb473";
251                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
252                 pullup-ohm = <100000>;   /* 100K */
253                 pulldown-ohm = <100000>; /* 100K */
254                 io-channels = <&adc 1>;  /* AP temperature */
255         };
256
257         thermistor-battery {
258                 compatible = "murata,ncp15wb473";
259                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
260                 pullup-ohm = <100000>;   /* 100K */
261                 pulldown-ohm = <100000>; /* 100K */
262                 io-channels = <&adc 2>;  /* Battery temperature */
263         };
264
265         thermal-zones {
266                 cpu_thermal: cpu-thermal {
267                         cooling-maps {
268                                 map0 {
269                                      /* Corresponds to 800MHz at freq_table */
270                                      cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
271                                                       <&cpu2 7 7>, <&cpu3 7 7>;
272                                 };
273                                 map1 {
274                                      /* Corresponds to 200MHz at freq_table */
275                                      cooling-device = <&cpu0 13 13>,
276                                                       <&cpu1 13 13>,
277                                                       <&cpu2 13 13>,
278                                                       <&cpu3 13 13>;
279                                };
280                        };
281                 };
282         };
283 };
284
285 &adc {
286         vdd-supply = <&ldo3_reg>;
287         status = "okay";
288 };
289
290 &bus_dmc {
291         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
292         vdd-supply = <&buck1_reg>;
293         status = "okay";
294 };
295
296 &bus_acp {
297         devfreq = <&bus_dmc>;
298         status = "okay";
299 };
300
301 &bus_c2c {
302         devfreq = <&bus_dmc>;
303         status = "okay";
304 };
305
306 &bus_leftbus {
307         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
308         vdd-supply = <&buck3_reg>;
309         status = "okay";
310 };
311
312 &bus_rightbus {
313         devfreq = <&bus_leftbus>;
314         status = "okay";
315 };
316
317 &bus_display {
318         devfreq = <&bus_leftbus>;
319         status = "okay";
320 };
321
322 &bus_fsys {
323         devfreq = <&bus_leftbus>;
324         status = "okay";
325 };
326
327 &bus_peri {
328         devfreq = <&bus_leftbus>;
329         status = "okay";
330 };
331
332 &bus_mfc {
333         devfreq = <&bus_leftbus>;
334         status = "okay";
335 };
336
337 &camera {
338         pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
339         pinctrl-names = "default";
340         status = "okay";
341         assigned-clocks = <&clock CLK_MOUT_CAM0>,
342                 <&clock CLK_MOUT_CAM1>;
343         assigned-clock-parents = <&clock CLK_XUSBXTI>,
344                 <&clock CLK_XUSBXTI>;
345 };
346
347 &cpu0 {
348         cpu0-supply = <&buck2_reg>;
349 };
350
351 &csis_0 {
352         status = "okay";
353         vddcore-supply = <&ldo8_reg>;
354         vddio-supply = <&ldo10_reg>;
355         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
356                         <&clock CLK_SCLK_CSIS0>;
357         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
358         assigned-clock-rates = <0>, <176000000>;
359
360         /* Camera C (3) MIPI CSI-2 (CSIS0) */
361         port@3 {
362                 reg = <3>;
363                 csis0_ep: endpoint {
364                         remote-endpoint = <&s5c73m3_ep>;
365                         data-lanes = <1 2 3 4>;
366                         samsung,csis-hs-settle = <12>;
367                 };
368         };
369 };
370
371 &csis_1 {
372         status = "okay";
373         vddcore-supply = <&ldo8_reg>;
374         vddio-supply = <&ldo10_reg>;
375         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
376                         <&clock CLK_SCLK_CSIS1>;
377         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
378         assigned-clock-rates = <0>, <176000000>;
379
380         /* Camera D (4) MIPI CSI-2 (CSIS1) */
381         port@4 {
382                 reg = <4>;
383                 csis1_ep: endpoint {
384                         remote-endpoint = <&is_s5k6a3_ep>;
385                         data-lanes = <1>;
386                         samsung,csis-hs-settle = <18>;
387                         samsung,csis-wclk;
388                 };
389         };
390 };
391
392 &dsi_0 {
393         vddcore-supply = <&ldo8_reg>;
394         vddio-supply = <&ldo10_reg>;
395         samsung,burst-clock-frequency = <500000000>;
396         samsung,esc-clock-frequency = <20000000>;
397         samsung,pll-clock-frequency = <24000000>;
398 };
399
400 &exynos_usbphy {
401         vbus-supply = <&esafeout1_reg>;
402         status = "okay";
403 };
404
405 &fimc_0 {
406         status = "okay";
407         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
408                         <&clock CLK_SCLK_FIMC0>;
409         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
410         assigned-clock-rates = <0>, <176000000>;
411 };
412
413 &fimc_1 {
414         status = "okay";
415         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
416                         <&clock CLK_SCLK_FIMC1>;
417         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
418         assigned-clock-rates = <0>, <176000000>;
419 };
420
421 &fimc_2 {
422         status = "okay";
423         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
424                         <&clock CLK_SCLK_FIMC2>;
425         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
426         assigned-clock-rates = <0>, <176000000>;
427 };
428
429 &fimc_3 {
430         status = "okay";
431         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
432                         <&clock CLK_SCLK_FIMC3>;
433         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
434         assigned-clock-rates = <0>, <176000000>;
435 };
436
437 &fimc_is {
438         pinctrl-0 = <&fimc_is_uart>;
439         pinctrl-names = "default";
440         status = "okay";
441
442         };
443
444 &fimc_lite_0 {
445         status = "okay";
446 };
447
448 &fimc_lite_1 {
449         status = "okay";
450 };
451
452 &fimd {
453         status = "okay";
454 };
455
456 &hdmi {
457         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
458         pinctrl-names = "default";
459         pinctrl-0 = <&hdmi_hpd>;
460         vdd-supply = <&ldo3_reg>;
461         vdd_osc-supply = <&ldo4_reg>;
462         vdd_pll-supply = <&ldo3_reg>;
463         ddc = <&i2c_5>;
464         status = "okay";
465
466         ports {
467                 #address-cells = <1>;
468                 #size-cells = <0>;
469
470                 port@1 {
471                         reg = <1>;
472                         hdmi_to_mhl: endpoint {
473                                 remote-endpoint = <&mhl_to_hdmi>;
474                         };
475                 };
476         };
477 };
478
479 &hsotg {
480         vusb_d-supply = <&ldo15_reg>;
481         vusb_a-supply = <&ldo12_reg>;
482         dr_mode = "peripheral";
483         status = "okay";
484 };
485
486 &i2c_0 {
487         samsung,i2c-sda-delay = <100>;
488         samsung,i2c-slave-addr = <0x10>;
489         samsung,i2c-max-bus-freq = <400000>;
490         pinctrl-0 = <&i2c0_bus>;
491         pinctrl-names = "default";
492         status = "okay";
493
494         s5c73m3: s5c73m3@3c {
495                 compatible = "samsung,s5c73m3";
496                 reg = <0x3c>;
497                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
498                 vdd-int-supply = <&buck9_reg>;
499                 vddio-cis-supply = <&ldo9_reg>;
500                 vddio-host-supply = <&ldo18_reg>;
501                 vdd-af-supply = <&cam_af_reg>;
502                 vdd-reg-supply = <&cam_io_reg>;
503                 clock-frequency = <24000000>;
504                 /* CAM_A_CLKOUT */
505                 clocks = <&camera 0>;
506                 clock-names = "cis_extclk";
507                 status = "disabled";
508                 port {
509                         s5c73m3_ep: endpoint {
510                                 remote-endpoint = <&csis0_ep>;
511                                 data-lanes = <1 2 3 4>;
512                         };
513                 };
514         };
515 };
516
517 &i2c1_isp {
518         pinctrl-0 = <&fimc_is_i2c1>;
519         pinctrl-names = "default";
520
521         s5k6a3@10 {
522                 compatible = "samsung,s5k6a3";
523                 reg = <0x10>;
524                 svdda-supply = <&cam_io_reg>;
525                 svddio-supply = <&ldo19_reg>;
526                 afvdd-supply = <&ldo19_reg>;
527                 clock-frequency = <24000000>;
528                 /* CAM_B_CLKOUT */
529                 clocks = <&camera 1>;
530                 clock-names = "extclk";
531                 samsung,camclk-out = <1>;
532                 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
533
534                 port {
535                         is_s5k6a3_ep: endpoint {
536                                 remote-endpoint = <&csis1_ep>;
537                                 data-lanes = <1>;
538                         };
539                 };
540         };
541 };
542
543 &i2c_3 {
544         samsung,i2c-sda-delay = <100>;
545         samsung,i2c-slave-addr = <0x10>;
546         samsung,i2c-max-bus-freq = <400000>;
547         pinctrl-0 = <&i2c3_bus>;
548         pinctrl-names = "default";
549         status = "okay";
550 };
551
552 &i2c_4 {
553         samsung,i2c-sda-delay = <100>;
554         samsung,i2c-slave-addr = <0x10>;
555         samsung,i2c-max-bus-freq = <100000>;
556         pinctrl-0 = <&i2c4_bus>;
557         pinctrl-names = "default";
558         status = "okay";
559
560         wm1811: wm1811@1a {
561                 compatible = "wlf,wm1811";
562                 reg = <0x1a>;
563                 clocks = <&pmu_system_controller 0>;
564                 clock-names = "MCLK1";
565                 DCVDD-supply = <&ldo3_reg>;
566                 DBVDD1-supply = <&ldo3_reg>;
567                 wlf,ldo1ena = <&gpj0 4 0>;
568         };
569 };
570
571 &i2c_5 {
572         status = "okay";
573 };
574
575 &i2c_7 {
576         samsung,i2c-sda-delay = <100>;
577         samsung,i2c-slave-addr = <0x10>;
578         samsung,i2c-max-bus-freq = <100000>;
579         pinctrl-0 = <&i2c7_bus>;
580         pinctrl-names = "default";
581         status = "okay";
582
583         max77686: max77686_pmic@9 {
584                 compatible = "maxim,max77686";
585                 interrupt-parent = <&gpx0>;
586                 interrupts = <7 IRQ_TYPE_NONE>;
587                 pinctrl-0 = <&max77686_irq>;
588                 pinctrl-names = "default";
589                 reg = <0x09>;
590                 #clock-cells = <1>;
591
592                 voltage-regulators {
593                         ldo1_reg: LDO1 {
594                                 regulator-name = "VALIVE_1.0V_AP";
595                                 regulator-min-microvolt = <1000000>;
596                                 regulator-max-microvolt = <1000000>;
597                                 regulator-always-on;
598                         };
599
600                         ldo2_reg: LDO2 {
601                                 regulator-name = "VM1M2_1.2V_AP";
602                                 regulator-min-microvolt = <1200000>;
603                                 regulator-max-microvolt = <1200000>;
604                                 regulator-always-on;
605                                 regulator-state-mem {
606                                         regulator-on-in-suspend;
607                                 };
608                         };
609
610                         ldo3_reg: LDO3 {
611                                 regulator-name = "VCC_1.8V_AP";
612                                 regulator-min-microvolt = <1800000>;
613                                 regulator-max-microvolt = <1800000>;
614                                 regulator-always-on;
615                         };
616
617                         ldo4_reg: LDO4 {
618                                 regulator-name = "VCC_2.8V_AP";
619                                 regulator-min-microvolt = <2800000>;
620                                 regulator-max-microvolt = <2800000>;
621                                 regulator-always-on;
622                         };
623
624                         ldo5_reg: LDO5 {
625                                 regulator-name = "VCC_1.8V_IO";
626                                 regulator-min-microvolt = <1800000>;
627                                 regulator-max-microvolt = <1800000>;
628                                 regulator-always-on;
629                         };
630
631                         ldo6_reg: LDO6 {
632                                 regulator-name = "VMPLL_1.0V_AP";
633                                 regulator-min-microvolt = <1000000>;
634                                 regulator-max-microvolt = <1000000>;
635                                 regulator-always-on;
636                                 regulator-state-mem {
637                                         regulator-on-in-suspend;
638                                 };
639                         };
640
641                         ldo7_reg: LDO7 {
642                                 regulator-name = "VPLL_1.0V_AP";
643                                 regulator-min-microvolt = <1000000>;
644                                 regulator-max-microvolt = <1000000>;
645                                 regulator-always-on;
646                                 regulator-state-mem {
647                                         regulator-on-in-suspend;
648                                 };
649                         };
650
651                         ldo8_reg: LDO8 {
652                                 regulator-name = "VMIPI_1.0V";
653                                 regulator-min-microvolt = <1000000>;
654                                 regulator-max-microvolt = <1000000>;
655                                 regulator-state-mem {
656                                         regulator-off-in-suspend;
657                                 };
658                         };
659
660                         ldo9_reg: LDO9 {
661                                 regulator-name = "CAM_ISP_MIPI_1.2V";
662                                 regulator-min-microvolt = <1200000>;
663                                 regulator-max-microvolt = <1200000>;
664                         };
665
666                         ldo10_reg: LDO10 {
667                                 regulator-name = "VMIPI_1.8V";
668                                 regulator-min-microvolt = <1800000>;
669                                 regulator-max-microvolt = <1800000>;
670                                 regulator-state-mem {
671                                         regulator-off-in-suspend;
672                                 };
673                         };
674
675                         ldo11_reg: LDO11 {
676                                 regulator-name = "VABB1_1.95V";
677                                 regulator-min-microvolt = <1950000>;
678                                 regulator-max-microvolt = <1950000>;
679                                 regulator-always-on;
680                                 regulator-state-mem {
681                                         regulator-off-in-suspend;
682                                 };
683                         };
684
685                         ldo12_reg: LDO12 {
686                                 regulator-name = "VUOTG_3.0V";
687                                 regulator-min-microvolt = <3000000>;
688                                 regulator-max-microvolt = <3000000>;
689                                 regulator-state-mem {
690                                         regulator-off-in-suspend;
691                                 };
692                         };
693
694                         ldo13_reg: LDO13 {
695                                 regulator-name = "NFC_AVDD_1.8V";
696                                 regulator-min-microvolt = <1800000>;
697                                 regulator-max-microvolt = <1800000>;
698                         };
699
700                         ldo14_reg: LDO14 {
701                                 regulator-name = "VABB2_1.95V";
702                                 regulator-min-microvolt = <1950000>;
703                                 regulator-max-microvolt = <1950000>;
704                                 regulator-always-on;
705                                 regulator-state-mem {
706                                         regulator-off-in-suspend;
707                                 };
708                         };
709
710                         ldo15_reg: LDO15 {
711                                 regulator-name = "VHSIC_1.0V";
712                                 regulator-min-microvolt = <1000000>;
713                                 regulator-max-microvolt = <1000000>;
714                                 regulator-state-mem {
715                                         regulator-on-in-suspend;
716                                 };
717                         };
718
719                         ldo16_reg: LDO16 {
720                                 regulator-name = "VHSIC_1.8V";
721                                 regulator-min-microvolt = <1800000>;
722                                 regulator-max-microvolt = <1800000>;
723                                 regulator-state-mem {
724                                         regulator-on-in-suspend;
725                                 };
726                         };
727
728                         ldo17_reg: LDO17 {
729                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
730                                 regulator-min-microvolt = <1200000>;
731                                 regulator-max-microvolt = <1200000>;
732                         };
733
734                         ldo18_reg: LDO18 {
735                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
736                                 regulator-min-microvolt = <1800000>;
737                                 regulator-max-microvolt = <1800000>;
738                         };
739
740                         ldo19_reg: LDO19 {
741                                 regulator-name = "VT_CAM_1.8V";
742                                 regulator-min-microvolt = <1800000>;
743                                 regulator-max-microvolt = <1800000>;
744                         };
745
746                         ldo20_reg: LDO20 {
747                                 regulator-name = "VDDQ_PRE_1.8V";
748                                 regulator-min-microvolt = <1800000>;
749                                 regulator-max-microvolt = <1800000>;
750                         };
751
752                         ldo21_reg: LDO21 {
753                                 regulator-name = "VTF_2.8V";
754                                 regulator-min-microvolt = <2800000>;
755                                 regulator-max-microvolt = <2800000>;
756                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
757                         };
758
759                         ldo22_reg: LDO22 {
760                                 regulator-name = "VMEM_VDD_2.8V";
761                                 regulator-min-microvolt = <2800000>;
762                                 regulator-max-microvolt = <2800000>;
763                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
764                         };
765
766                         ldo23_reg: LDO23 {
767                                 regulator-name = "TSP_AVDD_3.3V";
768                                 regulator-min-microvolt = <3300000>;
769                                 regulator-max-microvolt = <3300000>;
770                         };
771
772                         ldo24_reg: LDO24 {
773                                 regulator-name = "TSP_VDD_1.8V";
774                                 regulator-min-microvolt = <1800000>;
775                                 regulator-max-microvolt = <1800000>;
776                         };
777
778                         ldo25_reg: LDO25 {
779                                 regulator-name = "LDO25";
780                         };
781
782                         ldo26_reg: LDO26 {
783                                 regulator-name = "MOTOR_VCC_3.0V";
784                                 regulator-min-microvolt = <3000000>;
785                                 regulator-max-microvolt = <3000000>;
786                         };
787
788                         buck1_reg: BUCK1 {
789                                 regulator-name = "vdd_mif";
790                                 regulator-min-microvolt = <850000>;
791                                 regulator-max-microvolt = <1100000>;
792                                 regulator-always-on;
793                                 regulator-boot-on;
794                                 regulator-state-mem {
795                                         regulator-off-in-suspend;
796                                 };
797                         };
798
799                         buck2_reg: BUCK2 {
800                                 regulator-name = "vdd_arm";
801                                 regulator-min-microvolt = <850000>;
802                                 regulator-max-microvolt = <1500000>;
803                                 regulator-always-on;
804                                 regulator-boot-on;
805                                 regulator-state-mem {
806                                         regulator-on-in-suspend;
807                                 };
808                         };
809
810                         buck3_reg: BUCK3 {
811                                 regulator-name = "vdd_int";
812                                 regulator-min-microvolt = <850000>;
813                                 regulator-max-microvolt = <1150000>;
814                                 regulator-always-on;
815                                 regulator-boot-on;
816                                 regulator-state-mem {
817                                         regulator-off-in-suspend;
818                                 };
819                         };
820
821                         buck4_reg: BUCK4 {
822                                 regulator-name = "vdd_g3d";
823                                 regulator-min-microvolt = <850000>;
824                                 regulator-max-microvolt = <1150000>;
825                                 regulator-boot-on;
826                                 regulator-state-mem {
827                                         regulator-off-in-suspend;
828                                 };
829                         };
830
831                         buck5_reg: BUCK5 {
832                                 regulator-name = "VMEM_1.2V_AP";
833                                 regulator-min-microvolt = <1200000>;
834                                 regulator-max-microvolt = <1200000>;
835                                 regulator-always-on;
836                         };
837
838                         buck6_reg: BUCK6 {
839                                 regulator-name = "VCC_SUB_1.35V";
840                                 regulator-min-microvolt = <1350000>;
841                                 regulator-max-microvolt = <1350000>;
842                                 regulator-always-on;
843                         };
844
845                         buck7_reg: BUCK7 {
846                                 regulator-name = "VCC_SUB_2.0V";
847                                 regulator-min-microvolt = <2000000>;
848                                 regulator-max-microvolt = <2000000>;
849                                 regulator-always-on;
850                         };
851
852                         buck8_reg: BUCK8 {
853                                 regulator-name = "VMEM_VDDF_3.0V";
854                                 regulator-min-microvolt = <2850000>;
855                                 regulator-max-microvolt = <2850000>;
856                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
857                         };
858
859                         buck9_reg: BUCK9 {
860                                 regulator-name = "CAM_ISP_CORE_1.2V";
861                                 regulator-min-microvolt = <1000000>;
862                                 regulator-max-microvolt = <1200000>;
863                         };
864                 };
865         };
866 };
867
868 &i2c_8 {
869         status = "okay";
870 };
871
872 &i2s0 {
873         pinctrl-0 = <&i2s0_bus>;
874         pinctrl-names = "default";
875         status = "okay";
876 };
877
878 &mixer {
879         status = "okay";
880 };
881
882 &mshc_0 {
883         broken-cd;
884         non-removable;
885         card-detect-delay = <200>;
886         vmmc-supply = <&ldo22_reg>;
887         clock-frequency = <400000000>;
888         samsung,dw-mshc-ciu-div = <0>;
889         samsung,dw-mshc-sdr-timing = <2 3>;
890         samsung,dw-mshc-ddr-timing = <1 2>;
891         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
892         pinctrl-names = "default";
893         status = "okay";
894         bus-width = <8>;
895         cap-mmc-highspeed;
896 };
897
898 &pmu_system_controller {
899         assigned-clocks = <&pmu_system_controller 0>;
900         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
901 };
902
903 &pinctrl_0 {
904         pinctrl-names = "default";
905         pinctrl-0 = <&sleep0>;
906
907         mhl_int: mhl-int {
908                 samsung,pins = "gpf3-5";
909                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
910         };
911
912         i2c_mhl_bus: i2c-mhl-bus {
913                 samsung,pins = "gpf0-4", "gpf0-6";
914                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
915                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
916                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
917         };
918
919         sleep0: sleep-states {
920                 PIN_SLP(gpa0-0, INPUT, NONE);
921                 PIN_SLP(gpa0-1, OUT0, NONE);
922                 PIN_SLP(gpa0-2, INPUT, NONE);
923                 PIN_SLP(gpa0-3, INPUT, UP);
924                 PIN_SLP(gpa0-4, INPUT, NONE);
925                 PIN_SLP(gpa0-5, INPUT, DOWN);
926                 PIN_SLP(gpa0-6, INPUT, DOWN);
927                 PIN_SLP(gpa0-7, INPUT, UP);
928
929                 PIN_SLP(gpa1-0, INPUT, DOWN);
930                 PIN_SLP(gpa1-1, INPUT, DOWN);
931                 PIN_SLP(gpa1-2, INPUT, DOWN);
932                 PIN_SLP(gpa1-3, INPUT, DOWN);
933                 PIN_SLP(gpa1-4, INPUT, DOWN);
934                 PIN_SLP(gpa1-5, INPUT, DOWN);
935
936                 PIN_SLP(gpb-0, INPUT, NONE);
937                 PIN_SLP(gpb-1, INPUT, NONE);
938                 PIN_SLP(gpb-2, INPUT, NONE);
939                 PIN_SLP(gpb-3, INPUT, NONE);
940                 PIN_SLP(gpb-4, INPUT, DOWN);
941                 PIN_SLP(gpb-5, INPUT, UP);
942                 PIN_SLP(gpb-6, INPUT, DOWN);
943                 PIN_SLP(gpb-7, INPUT, DOWN);
944
945                 PIN_SLP(gpc0-0, INPUT, DOWN);
946                 PIN_SLP(gpc0-1, INPUT, DOWN);
947                 PIN_SLP(gpc0-2, INPUT, DOWN);
948                 PIN_SLP(gpc0-3, INPUT, DOWN);
949                 PIN_SLP(gpc0-4, INPUT, DOWN);
950
951                 PIN_SLP(gpc1-0, INPUT, NONE);
952                 PIN_SLP(gpc1-1, PREV, NONE);
953                 PIN_SLP(gpc1-2, INPUT, NONE);
954                 PIN_SLP(gpc1-3, INPUT, NONE);
955                 PIN_SLP(gpc1-4, INPUT, NONE);
956
957                 PIN_SLP(gpd0-0, INPUT, DOWN);
958                 PIN_SLP(gpd0-1, INPUT, DOWN);
959                 PIN_SLP(gpd0-2, INPUT, NONE);
960                 PIN_SLP(gpd0-3, INPUT, NONE);
961
962                 PIN_SLP(gpd1-0, INPUT, DOWN);
963                 PIN_SLP(gpd1-1, INPUT, DOWN);
964                 PIN_SLP(gpd1-2, INPUT, NONE);
965                 PIN_SLP(gpd1-3, INPUT, NONE);
966
967                 PIN_SLP(gpf0-0, INPUT, NONE);
968                 PIN_SLP(gpf0-1, INPUT, NONE);
969                 PIN_SLP(gpf0-2, INPUT, DOWN);
970                 PIN_SLP(gpf0-3, INPUT, DOWN);
971                 PIN_SLP(gpf0-4, INPUT, NONE);
972                 PIN_SLP(gpf0-5, INPUT, DOWN);
973                 PIN_SLP(gpf0-6, INPUT, NONE);
974                 PIN_SLP(gpf0-7, INPUT, DOWN);
975
976                 PIN_SLP(gpf1-0, INPUT, DOWN);
977                 PIN_SLP(gpf1-1, INPUT, DOWN);
978                 PIN_SLP(gpf1-2, INPUT, DOWN);
979                 PIN_SLP(gpf1-3, INPUT, DOWN);
980                 PIN_SLP(gpf1-4, INPUT, NONE);
981                 PIN_SLP(gpf1-5, INPUT, NONE);
982                 PIN_SLP(gpf1-6, INPUT, DOWN);
983                 PIN_SLP(gpf1-7, PREV, NONE);
984
985                 PIN_SLP(gpf2-0, PREV, NONE);
986                 PIN_SLP(gpf2-1, INPUT, DOWN);
987                 PIN_SLP(gpf2-2, INPUT, DOWN);
988                 PIN_SLP(gpf2-3, INPUT, DOWN);
989                 PIN_SLP(gpf2-4, INPUT, DOWN);
990                 PIN_SLP(gpf2-5, INPUT, DOWN);
991                 PIN_SLP(gpf2-6, INPUT, NONE);
992                 PIN_SLP(gpf2-7, INPUT, NONE);
993
994                 PIN_SLP(gpf3-0, INPUT, NONE);
995                 PIN_SLP(gpf3-1, PREV, NONE);
996                 PIN_SLP(gpf3-2, PREV, NONE);
997                 PIN_SLP(gpf3-3, PREV, NONE);
998                 PIN_SLP(gpf3-4, OUT1, NONE);
999                 PIN_SLP(gpf3-5, INPUT, DOWN);
1000
1001                 PIN_SLP(gpj0-0, PREV, NONE);
1002                 PIN_SLP(gpj0-1, PREV, NONE);
1003                 PIN_SLP(gpj0-2, PREV, NONE);
1004                 PIN_SLP(gpj0-3, INPUT, DOWN);
1005                 PIN_SLP(gpj0-4, PREV, NONE);
1006                 PIN_SLP(gpj0-5, PREV, NONE);
1007                 PIN_SLP(gpj0-6, INPUT, DOWN);
1008                 PIN_SLP(gpj0-7, INPUT, DOWN);
1009
1010                 PIN_SLP(gpj1-0, INPUT, DOWN);
1011                 PIN_SLP(gpj1-1, PREV, NONE);
1012                 PIN_SLP(gpj1-2, PREV, NONE);
1013                 PIN_SLP(gpj1-3, INPUT, DOWN);
1014                 PIN_SLP(gpj1-4, INPUT, DOWN);
1015         };
1016 };
1017
1018 &pinctrl_1 {
1019         pinctrl-names = "default";
1020         pinctrl-0 = <&sleep1>;
1021
1022         gpio_keys: gpio-keys {
1023                 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1024                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1025         };
1026
1027         max77686_irq: max77686-irq {
1028                 samsung,pins = "gpx0-7";
1029                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1030         };
1031
1032         max77693_irq: max77693-irq {
1033                 samsung,pins = "gpx1-5";
1034                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1035         };
1036
1037         max77693_fuel_irq: max77693-fuel-irq {
1038                 samsung,pins = "gpx2-3";
1039                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1040         };
1041
1042         sdhci2_cd: sdhci2-cd-irq {
1043                 samsung,pins = "gpx3-4";
1044                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1045         };
1046
1047         hdmi_hpd: hdmi-hpd {
1048                 samsung,pins = "gpx3-7";
1049                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1050         };
1051
1052         sleep1: sleep-states {
1053                 PIN_SLP(gpk0-0, PREV, NONE);
1054                 PIN_SLP(gpk0-1, PREV, NONE);
1055                 PIN_SLP(gpk0-2, OUT0, NONE);
1056                 PIN_SLP(gpk0-3, PREV, NONE);
1057                 PIN_SLP(gpk0-4, PREV, NONE);
1058                 PIN_SLP(gpk0-5, PREV, NONE);
1059                 PIN_SLP(gpk0-6, PREV, NONE);
1060
1061                 PIN_SLP(gpk1-0, INPUT, DOWN);
1062                 PIN_SLP(gpk1-1, INPUT, DOWN);
1063                 PIN_SLP(gpk1-2, INPUT, DOWN);
1064                 PIN_SLP(gpk1-3, PREV, NONE);
1065                 PIN_SLP(gpk1-4, PREV, NONE);
1066                 PIN_SLP(gpk1-5, PREV, NONE);
1067                 PIN_SLP(gpk1-6, PREV, NONE);
1068
1069                 PIN_SLP(gpk2-0, INPUT, DOWN);
1070                 PIN_SLP(gpk2-1, INPUT, DOWN);
1071                 PIN_SLP(gpk2-2, INPUT, DOWN);
1072                 PIN_SLP(gpk2-3, INPUT, DOWN);
1073                 PIN_SLP(gpk2-4, INPUT, DOWN);
1074                 PIN_SLP(gpk2-5, INPUT, DOWN);
1075                 PIN_SLP(gpk2-6, INPUT, DOWN);
1076
1077                 PIN_SLP(gpk3-0, OUT0, NONE);
1078                 PIN_SLP(gpk3-1, INPUT, NONE);
1079                 PIN_SLP(gpk3-2, INPUT, DOWN);
1080                 PIN_SLP(gpk3-3, INPUT, NONE);
1081                 PIN_SLP(gpk3-4, INPUT, NONE);
1082                 PIN_SLP(gpk3-5, INPUT, NONE);
1083                 PIN_SLP(gpk3-6, INPUT, NONE);
1084
1085                 PIN_SLP(gpl0-0, INPUT, DOWN);
1086                 PIN_SLP(gpl0-1, INPUT, DOWN);
1087                 PIN_SLP(gpl0-2, INPUT, DOWN);
1088                 PIN_SLP(gpl0-3, INPUT, DOWN);
1089                 PIN_SLP(gpl0-4, PREV, NONE);
1090                 PIN_SLP(gpl0-6, PREV, NONE);
1091
1092                 PIN_SLP(gpl1-0, INPUT, DOWN);
1093                 PIN_SLP(gpl1-1, INPUT, DOWN);
1094                 PIN_SLP(gpl2-0, INPUT, DOWN);
1095                 PIN_SLP(gpl2-1, INPUT, DOWN);
1096                 PIN_SLP(gpl2-2, INPUT, DOWN);
1097                 PIN_SLP(gpl2-3, INPUT, DOWN);
1098                 PIN_SLP(gpl2-4, INPUT, DOWN);
1099                 PIN_SLP(gpl2-5, INPUT, DOWN);
1100                 PIN_SLP(gpl2-6, PREV, NONE);
1101                 PIN_SLP(gpl2-7, INPUT, DOWN);
1102
1103                 PIN_SLP(gpm0-0, INPUT, DOWN);
1104                 PIN_SLP(gpm0-1, INPUT, DOWN);
1105                 PIN_SLP(gpm0-2, INPUT, DOWN);
1106                 PIN_SLP(gpm0-3, INPUT, DOWN);
1107                 PIN_SLP(gpm0-4, INPUT, DOWN);
1108                 PIN_SLP(gpm0-5, INPUT, DOWN);
1109                 PIN_SLP(gpm0-6, INPUT, DOWN);
1110                 PIN_SLP(gpm0-7, INPUT, DOWN);
1111
1112                 PIN_SLP(gpm1-0, INPUT, DOWN);
1113                 PIN_SLP(gpm1-1, INPUT, DOWN);
1114                 PIN_SLP(gpm1-2, INPUT, NONE);
1115                 PIN_SLP(gpm1-3, INPUT, NONE);
1116                 PIN_SLP(gpm1-4, INPUT, NONE);
1117                 PIN_SLP(gpm1-5, INPUT, NONE);
1118                 PIN_SLP(gpm1-6, INPUT, DOWN);
1119
1120                 PIN_SLP(gpm2-0, INPUT, NONE);
1121                 PIN_SLP(gpm2-1, INPUT, NONE);
1122                 PIN_SLP(gpm2-2, INPUT, DOWN);
1123                 PIN_SLP(gpm2-3, INPUT, DOWN);
1124                 PIN_SLP(gpm2-4, INPUT, DOWN);
1125
1126                 PIN_SLP(gpm3-0, PREV, NONE);
1127                 PIN_SLP(gpm3-1, PREV, NONE);
1128                 PIN_SLP(gpm3-2, PREV, NONE);
1129                 PIN_SLP(gpm3-3, OUT1, NONE);
1130                 PIN_SLP(gpm3-4, INPUT, DOWN);
1131                 PIN_SLP(gpm3-5, INPUT, DOWN);
1132                 PIN_SLP(gpm3-6, INPUT, DOWN);
1133                 PIN_SLP(gpm3-7, INPUT, DOWN);
1134
1135                 PIN_SLP(gpm4-0, INPUT, DOWN);
1136                 PIN_SLP(gpm4-1, INPUT, DOWN);
1137                 PIN_SLP(gpm4-2, INPUT, DOWN);
1138                 PIN_SLP(gpm4-3, INPUT, DOWN);
1139                 PIN_SLP(gpm4-4, INPUT, DOWN);
1140                 PIN_SLP(gpm4-5, INPUT, DOWN);
1141                 PIN_SLP(gpm4-6, INPUT, DOWN);
1142                 PIN_SLP(gpm4-7, INPUT, DOWN);
1143
1144                 PIN_SLP(gpy0-0, INPUT, DOWN);
1145                 PIN_SLP(gpy0-1, INPUT, DOWN);
1146                 PIN_SLP(gpy0-2, INPUT, DOWN);
1147                 PIN_SLP(gpy0-3, INPUT, DOWN);
1148                 PIN_SLP(gpy0-4, INPUT, DOWN);
1149                 PIN_SLP(gpy0-5, INPUT, DOWN);
1150
1151                 PIN_SLP(gpy1-0, INPUT, DOWN);
1152                 PIN_SLP(gpy1-1, INPUT, DOWN);
1153                 PIN_SLP(gpy1-2, INPUT, DOWN);
1154                 PIN_SLP(gpy1-3, INPUT, DOWN);
1155
1156                 PIN_SLP(gpy2-0, PREV, NONE);
1157                 PIN_SLP(gpy2-1, INPUT, DOWN);
1158                 PIN_SLP(gpy2-2, INPUT, NONE);
1159                 PIN_SLP(gpy2-3, INPUT, NONE);
1160                 PIN_SLP(gpy2-4, INPUT, NONE);
1161                 PIN_SLP(gpy2-5, INPUT, NONE);
1162
1163                 PIN_SLP(gpy3-0, INPUT, DOWN);
1164                 PIN_SLP(gpy3-1, INPUT, DOWN);
1165                 PIN_SLP(gpy3-2, INPUT, DOWN);
1166                 PIN_SLP(gpy3-3, INPUT, DOWN);
1167                 PIN_SLP(gpy3-4, INPUT, DOWN);
1168                 PIN_SLP(gpy3-5, INPUT, DOWN);
1169                 PIN_SLP(gpy3-6, INPUT, DOWN);
1170                 PIN_SLP(gpy3-7, INPUT, DOWN);
1171
1172                 PIN_SLP(gpy4-0, INPUT, DOWN);
1173                 PIN_SLP(gpy4-1, INPUT, DOWN);
1174                 PIN_SLP(gpy4-2, INPUT, DOWN);
1175                 PIN_SLP(gpy4-3, INPUT, DOWN);
1176                 PIN_SLP(gpy4-4, INPUT, DOWN);
1177                 PIN_SLP(gpy4-5, INPUT, DOWN);
1178                 PIN_SLP(gpy4-6, INPUT, DOWN);
1179                 PIN_SLP(gpy4-7, INPUT, DOWN);
1180
1181                 PIN_SLP(gpy5-0, INPUT, DOWN);
1182                 PIN_SLP(gpy5-1, INPUT, DOWN);
1183                 PIN_SLP(gpy5-2, INPUT, DOWN);
1184                 PIN_SLP(gpy5-3, INPUT, DOWN);
1185                 PIN_SLP(gpy5-4, INPUT, DOWN);
1186                 PIN_SLP(gpy5-5, INPUT, DOWN);
1187                 PIN_SLP(gpy5-6, INPUT, DOWN);
1188                 PIN_SLP(gpy5-7, INPUT, DOWN);
1189
1190                 PIN_SLP(gpy6-0, INPUT, DOWN);
1191                 PIN_SLP(gpy6-1, INPUT, DOWN);
1192                 PIN_SLP(gpy6-2, INPUT, DOWN);
1193                 PIN_SLP(gpy6-3, INPUT, DOWN);
1194                 PIN_SLP(gpy6-4, INPUT, DOWN);
1195                 PIN_SLP(gpy6-5, INPUT, DOWN);
1196                 PIN_SLP(gpy6-6, INPUT, DOWN);
1197                 PIN_SLP(gpy6-7, INPUT, DOWN);
1198         };
1199 };
1200
1201 &pinctrl_2 {
1202         pinctrl-names = "default";
1203         pinctrl-0 = <&sleep2>;
1204
1205         sleep2: sleep-states {
1206                 PIN_SLP(gpz-0, INPUT, DOWN);
1207                 PIN_SLP(gpz-1, INPUT, DOWN);
1208                 PIN_SLP(gpz-2, INPUT, DOWN);
1209                 PIN_SLP(gpz-3, INPUT, DOWN);
1210                 PIN_SLP(gpz-4, INPUT, DOWN);
1211                 PIN_SLP(gpz-5, INPUT, DOWN);
1212                 PIN_SLP(gpz-6, INPUT, DOWN);
1213         };
1214 };
1215
1216 &pinctrl_3 {
1217         pinctrl-names = "default";
1218         pinctrl-0 = <&sleep3>;
1219
1220         sleep3: sleep-states {
1221                 PIN_SLP(gpv0-0, INPUT, DOWN);
1222                 PIN_SLP(gpv0-1, INPUT, DOWN);
1223                 PIN_SLP(gpv0-2, INPUT, DOWN);
1224                 PIN_SLP(gpv0-3, INPUT, DOWN);
1225                 PIN_SLP(gpv0-4, INPUT, DOWN);
1226                 PIN_SLP(gpv0-5, INPUT, DOWN);
1227                 PIN_SLP(gpv0-6, INPUT, DOWN);
1228                 PIN_SLP(gpv0-7, INPUT, DOWN);
1229
1230                 PIN_SLP(gpv1-0, INPUT, DOWN);
1231                 PIN_SLP(gpv1-1, INPUT, DOWN);
1232                 PIN_SLP(gpv1-2, INPUT, DOWN);
1233                 PIN_SLP(gpv1-3, INPUT, DOWN);
1234                 PIN_SLP(gpv1-4, INPUT, DOWN);
1235                 PIN_SLP(gpv1-5, INPUT, DOWN);
1236                 PIN_SLP(gpv1-6, INPUT, DOWN);
1237                 PIN_SLP(gpv1-7, INPUT, DOWN);
1238
1239                 PIN_SLP(gpv2-0, INPUT, DOWN);
1240                 PIN_SLP(gpv2-1, INPUT, DOWN);
1241                 PIN_SLP(gpv2-2, INPUT, DOWN);
1242                 PIN_SLP(gpv2-3, INPUT, DOWN);
1243                 PIN_SLP(gpv2-4, INPUT, DOWN);
1244                 PIN_SLP(gpv2-5, INPUT, DOWN);
1245                 PIN_SLP(gpv2-6, INPUT, DOWN);
1246                 PIN_SLP(gpv2-7, INPUT, DOWN);
1247
1248                 PIN_SLP(gpv3-0, INPUT, DOWN);
1249                 PIN_SLP(gpv3-1, INPUT, DOWN);
1250                 PIN_SLP(gpv3-2, INPUT, DOWN);
1251                 PIN_SLP(gpv3-3, INPUT, DOWN);
1252                 PIN_SLP(gpv3-4, INPUT, DOWN);
1253                 PIN_SLP(gpv3-5, INPUT, DOWN);
1254                 PIN_SLP(gpv3-6, INPUT, DOWN);
1255                 PIN_SLP(gpv3-7, INPUT, DOWN);
1256
1257                 PIN_SLP(gpv4-0, INPUT, DOWN);
1258         };
1259 };
1260
1261 &pwm {
1262         pinctrl-0 = <&pwm0_out>;
1263         pinctrl-names = "default";
1264         samsung,pwm-outputs = <0>;
1265         status = "okay";
1266 };
1267
1268 &rtc {
1269         status = "okay";
1270         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1271         clock-names = "rtc", "rtc_src";
1272 };
1273
1274 &sdhci_2 {
1275         bus-width = <4>;
1276         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1277         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1278         pinctrl-names = "default";
1279         vmmc-supply = <&ldo21_reg>;
1280         status = "okay";
1281 };
1282
1283 &sdhci_3 {
1284         #address-cells = <1>;
1285         #size-cells = <0>;
1286         non-removable;
1287         bus-width = <4>;
1288
1289         mmc-pwrseq = <&wlan_pwrseq>;
1290         pinctrl-names = "default";
1291         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1292         status = "okay";
1293
1294         brcmf: wifi@1 {
1295                 reg = <1>;
1296                 compatible = "brcm,bcm4329-fmac";
1297                 interrupt-parent = <&gpx2>;
1298                 interrupts = <5 IRQ_TYPE_NONE>;
1299                 interrupt-names = "host-wake";
1300         };
1301 };
1302
1303 &serial_0 {
1304         status = "okay";
1305 };
1306
1307 &serial_1 {
1308         status = "okay";
1309 };
1310
1311 &serial_2 {
1312         status = "okay";
1313 };
1314
1315 &serial_3 {
1316         status = "okay";
1317 };
1318
1319 &spi_1 {
1320         pinctrl-names = "default";
1321         pinctrl-0 = <&spi1_bus>;
1322         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1323         status = "okay";
1324
1325         s5c73m3_spi: s5c73m3@0 {
1326                 compatible = "samsung,s5c73m3";
1327                 spi-max-frequency = <50000000>;
1328                 reg = <0>;
1329                 controller-data {
1330                         samsung,spi-feedback-delay = <2>;
1331                 };
1332         };
1333 };
1334
1335 &tmu {
1336         vtmu-supply = <&ldo10_reg>;
1337         status = "okay";
1338 };