1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos3250 based ARTIK5 module device tree source
5 * Copyright (c) 2016 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
8 * Device tree source file for Samsung's ARTIK5 module which is based on
9 * Samsung Exynos3250 SoC.
12 #include "exynos3250.dtsi"
13 #include <dt-bindings/clock/samsung,s2mps11.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/interrupt-controller/irq.h>
18 compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
21 stdout-path = &serial_2;
25 device_type = "memory";
26 reg = <0x40000000 0x1ff00000>;
30 compatible = "samsung,secure-firmware";
31 reg = <0x0205f000 0x1000>;
35 cpu_thermal: cpu-thermal {
38 /* Corresponds to 500MHz */
39 cooling-device = <&cpu0 5 5>;
42 /* Corresponds to 200MHz */
43 cooling-device = <&cpu0 8 8>;
51 vdd-supply = <&ldo7_reg>;
52 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
53 assigned-clock-rates = <6000000>;
57 cpu0-supply = <&buck2_reg>;
63 samsung,i2c-sda-delay = <100>;
64 samsung,i2c-slave-addr = <0x10>;
65 samsung,i2c-max-bus-freq = <100000>;
69 compatible = "samsung,s2mps14-pmic";
70 interrupt-parent = <&gpx3>;
71 interrupts = <5 IRQ_TYPE_NONE>;
75 compatible = "samsung,s2mps14-clk";
77 clock-output-names = "s2mps14_ap", "unused",
84 regulator-name = "VLDO1_1.0V";
85 regulator-min-microvolt = <1000000>;
86 regulator-max-microvolt = <1000000>;
91 /* VDDQM176 ~ VDDQM185 */
92 regulator-name = "VLDO2_1.2V";
93 regulator-min-microvolt = <1200000>;
94 regulator-max-microvolt = <1200000>;
100 * VDD1_E106 ~ VDD1_E111
101 * DVDD_RTC_AP, DVDD_MMC2_AP
103 regulator-name = "VLDO3_1.8V";
104 regulator-min-microvolt = <1800000>;
105 regulator-max-microvolt = <1800000>;
110 /* AVDD_PLL1120 ~ AVDD_PLL11201 */
111 regulator-name = "VLDO4_1.8V";
112 regulator-min-microvolt = <1800000>;
113 regulator-max-microvolt = <1800000>;
118 /* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
119 regulator-name = "VLDO5_1.0V";
120 regulator-min-microvolt = <1000000>;
121 regulator-max-microvolt = <1000000>;
126 /* VDD_USB, VDD10_HSIC */
127 regulator-name = "VLDO6_1.0V";
128 regulator-min-microvolt = <1000000>;
129 regulator-max-microvolt = <1000000>;
135 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
136 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
138 regulator-name = "VLDO7_1.8V";
139 regulator-min-microvolt = <1800000>;
140 regulator-max-microvolt = <1800000>;
146 regulator-name = "VLDO8_3.0V";
147 regulator-min-microvolt = <3000000>;
148 regulator-max-microvolt = <3000000>;
153 /* VDDQ_E86 ~ VDDQ_E105*/
154 regulator-name = "VLDO9_1.2V";
155 regulator-min-microvolt = <1200000>;
156 regulator-max-microvolt = <1200000>;
161 regulator-name = "VLDO10_1.0V";
162 regulator-min-microvolt = <1000000>;
163 regulator-max-microvolt = <1000000>;
168 regulator-name = "VLDO11_1.8V";
169 regulator-min-microvolt = <1800000>;
170 regulator-max-microvolt = <1800000>;
171 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
176 regulator-name = "VLDO12_2.8V";
177 regulator-min-microvolt = <2800000>;
178 regulator-max-microvolt = <2800000>;
179 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
183 regulator-name = "VLDO13_2.8V";
184 regulator-min-microvolt = <2800000>;
185 regulator-max-microvolt = <2800000>;
189 regulator-name = "VLDO14_2.7V";
190 regulator-min-microvolt = <2700000>;
191 regulator-max-microvolt = <2700000>;
195 regulator-name = "VLDO_3.3V";
196 regulator-min-microvolt = <3300000>;
197 regulator-max-microvolt = <3300000>;
201 regulator-name = "VLDO16_3.3V";
202 regulator-min-microvolt = <3300000>;
203 regulator-max-microvolt = <3300000>;
207 regulator-name = "VLDO17_3.0V";
208 regulator-min-microvolt = <3000000>;
209 regulator-max-microvolt = <3000000>;
214 regulator-name = "VLDO18_2.8V";
215 regulator-min-microvolt = <2800000>;
216 regulator-max-microvolt = <2800000>;
220 regulator-name = "VLDO19_1.8V";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
226 regulator-name = "VLDO20_1.8V";
227 regulator-min-microvolt = <1800000>;
228 regulator-max-microvolt = <1800000>;
232 regulator-name = "VLDO21_1.25V";
233 regulator-min-microvolt = <1250000>;
234 regulator-max-microvolt = <1250000>;
238 regulator-name = "VLDO22_1.2V";
239 regulator-min-microvolt = <1200000>;
240 regulator-max-microvolt = <1200000>;
244 /* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
245 regulator-name = "VLDO23_1.8V";
246 regulator-min-microvolt = <1800000>;
247 regulator-max-microvolt = <1800000>;
251 regulator-name = "VLDO24_3.0V";
252 regulator-min-microvolt = <3000000>;
253 regulator-max-microvolt = <3000000>;
257 regulator-name = "VLDO25_3.0V";
258 regulator-min-microvolt = <3000000>;
259 regulator-max-microvolt = <3000000>;
264 regulator-name = "VBUCK1_1.0V";
265 regulator-min-microvolt = <800000>;
266 regulator-max-microvolt = <1000000>;
272 regulator-name = "VBUCK2_1.2V";
273 regulator-min-microvolt = <850000>;
274 regulator-max-microvolt = <1200000>;
280 regulator-name = "VBUCK3_1.0V";
281 regulator-min-microvolt = <850000>;
282 regulator-max-microvolt = <1000000>;
287 regulator-name = "VBUCK4_1.95V";
288 regulator-min-microvolt = <1950000>;
289 regulator-max-microvolt = <1950000>;
294 regulator-name = "VBUCK5_1.35V";
295 regulator-min-microvolt = <1350000>;
296 regulator-max-microvolt = <1350000>;
306 card-detect-delay = <200>;
307 vmmc-supply = <&ldo12_reg>;
308 clock-frequency = <100000000>;
309 max-frequency = <100000000>;
310 samsung,dw-mshc-ciu-div = <1>;
311 samsung,dw-mshc-sdr-timing = <0 1>;
312 samsung,dw-mshc-ddr-timing = <1 2>;
313 pinctrl-names = "default";
314 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
320 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
321 clock-names = "rtc", "rtc_src";
330 clock-frequency = <24000000>;