arch/arm/boot/dts/dra7.dtsi

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  * Based on "omap4.dtsi"
   8  */
   9
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/pinctrl/dra.h>
  12
  13 #define MAX_SOURCES 400
  14
  15 / {
  16         #address-cells = <2>;
  17         #size-cells = <2>;
  18
  19         compatible = "ti,dra7xx";
  20         interrupt-parent = <&crossbar_mpu>;
  21         chosen { };
  22
  23         aliases {
  24                 i2c0 = &i2c1;
  25                 i2c1 = &i2c2;
  26                 i2c2 = &i2c3;
  27                 i2c3 = &i2c4;
  28                 i2c4 = &i2c5;
  29                 serial0 = &uart1;
  30                 serial1 = &uart2;
  31                 serial2 = &uart3;
  32                 serial3 = &uart4;
  33                 serial4 = &uart5;
  34                 serial5 = &uart6;
  35                 serial6 = &uart7;
  36                 serial7 = &uart8;
  37                 serial8 = &uart9;
  38                 serial9 = &uart10;
  39                 ethernet0 = &cpsw_emac0;
  40                 ethernet1 = &cpsw_emac1;
  41                 d_can0 = &dcan1;
  42                 d_can1 = &dcan2;
  43                 spi0 = &qspi;
  44         };
  45
  46         timer {
  47                 compatible = "arm,armv7-timer";
  48                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  49                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  50                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  51                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  52                 interrupt-parent = <&gic>;
  53         };
  54
  55         gic: interrupt-controller@48211000 {
  56                 compatible = "arm,cortex-a15-gic";
  57                 interrupt-controller;
  58                 #interrupt-cells = <3>;
  59                 reg = <0x0 0x48211000 0x0 0x1000>,
  60                       <0x0 0x48212000 0x0 0x2000>,
  61                       <0x0 0x48214000 0x0 0x2000>,
  62                       <0x0 0x48216000 0x0 0x2000>;
  63                 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
  64                 interrupt-parent = <&gic>;
  65         };
  66
  67         wakeupgen: interrupt-controller@48281000 {
  68                 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
  69                 interrupt-controller;
  70                 #interrupt-cells = <3>;
  71                 reg = <0x0 0x48281000 0x0 0x1000>;
  72                 interrupt-parent = <&gic>;
  73         };
  74
  75         cpus {
  76                 #address-cells = <1>;
  77                 #size-cells = <0>;
  78
  79                 cpu0: cpu@0 {
  80                         device_type = "cpu";
  81                         compatible = "arm,cortex-a15";
  82                         reg = <0>;
  83
  84                         operating-points-v2 = <&cpu0_opp_table>;
  85
  86                         clocks = <&dpll_mpu_ck>;
  87                         clock-names = "cpu";
  88
  89                         clock-latency = <300000>; /* From omap-cpufreq driver */
  90
  91                         /* cooling options */
  92                         cooling-min-level = <0>;
  93                         cooling-max-level = <2>;
  94                         #cooling-cells = <2>; /* min followed by max */
  95                 };
  96         };
  97
  98         cpu0_opp_table: opp-table {
  99                 compatible = "operating-points-v2-ti-cpu";
 100                 syscon = <&scm_wkup>;
 101
 102                 opp_nom-1000000000 {
 103                         opp-hz = /bits/ 64 <1000000000>;
 104                         opp-microvolt = <1060000 850000 1150000>;
 105                         opp-supported-hw = <0xFF 0x01>;
 106                         opp-suspend;
 107                 };
 108
 109                 opp_od-1176000000 {
 110                         opp-hz = /bits/ 64 <1176000000>;
 111                         opp-microvolt = <1160000 885000 1160000>;
 112                         opp-supported-hw = <0xFF 0x02>;
 113                 };
 114         };
 115
 116         /*
 117          * The soc node represents the soc top level view. It is used for IPs
 118          * that are not memory mapped in the MPU view or for the MPU itself.
 119          */
 120         soc {
 121                 compatible = "ti,omap-infra";
 122                 mpu {
 123                         compatible = "ti,omap5-mpu";
 124                         ti,hwmods = "mpu";
 125                 };
 126         };
 127
 128         /*
 129          * XXX: Use a flat representation of the SOC interconnect.
 130          * The real OMAP interconnect network is quite complex.
 131          * Since it will not bring real advantage to represent that in DT for
 132          * the moment, just use a fake OCP bus entry to represent the whole bus
 133          * hierarchy.
 134          */
 135         ocp {
 136                 compatible = "ti,dra7-l3-noc", "simple-bus";
 137                 #address-cells = <1>;
 138                 #size-cells = <1>;
 139                 ranges = <0x0 0x0 0x0 0xc0000000>;
 140                 ti,hwmods = "l3_main_1", "l3_main_2";
 141                 reg = <0x0 0x44000000 0x0 0x1000000>,
 142                       <0x0 0x45000000 0x0 0x1000>;
 143                 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 144                                       <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 145
 146                 l4_cfg: l4@4a000000 {
 147                         compatible = "ti,dra7-l4-cfg", "simple-bus";
 148                         #address-cells = <1>;
 149                         #size-cells = <1>;
 150                         ranges = <0 0x4a000000 0x22c000>;
 151
 152                         scm: scm@2000 {
 153                                 compatible = "ti,dra7-scm-core", "simple-bus";
 154                                 reg = <0x2000 0x2000>;
 155                                 #address-cells = <1>;
 156                                 #size-cells = <1>;
 157                                 ranges = <0 0x2000 0x2000>;
 158
 159                                 scm_conf: scm_conf@0 {
 160                                         compatible = "syscon", "simple-bus";
 161                                         reg = <0x0 0x1400>;
 162                                         #address-cells = <1>;
 163                                         #size-cells = <1>;
 164                                         ranges = <0 0x0 0x1400>;
 165
 166                                         pbias_regulator: pbias_regulator@e00 {
 167                                                 compatible = "ti,pbias-dra7", "ti,pbias-omap";
 168                                                 reg = <0xe00 0x4>;
 169                                                 syscon = <&scm_conf>;
 170                                                 pbias_mmc_reg: pbias_mmc_omap5 {
 171                                                         regulator-name = "pbias_mmc_omap5";
 172                                                         regulator-min-microvolt = <1800000>;
 173                                                         regulator-max-microvolt = <3000000>;
 174                                                 };
 175                                         };
 176
 177                                         scm_conf_clocks: clocks {
 178                                                 #address-cells = <1>;
 179                                                 #size-cells = <0>;
 180                                         };
 181                                 };
 182
 183                                 dra7_pmx_core: pinmux@1400 {
 184                                         compatible = "ti,dra7-padconf",
 185                                                      "pinctrl-single";
 186                                         reg = <0x1400 0x0468>;
 187                                         #address-cells = <1>;
 188                                         #size-cells = <0>;
 189                                         #pinctrl-cells = <1>;
 190                                         #interrupt-cells = <1>;
 191                                         interrupt-controller;
 192                                         pinctrl-single,register-width = <32>;
 193                                         pinctrl-single,function-mask = <0x3fffffff>;
 194                                 };
 195
 196                                 scm_conf1: scm_conf@1c04 {
 197                                         compatible = "syscon";
 198                                         reg = <0x1c04 0x0020>;
 199                                         #syscon-cells = <2>;
 200                                 };
 201
 202                                 scm_conf_pcie: scm_conf@1c24 {
 203                                         compatible = "syscon";
 204                                         reg = <0x1c24 0x0024>;
 205                                 };
 206
 207                                 sdma_xbar: dma-router@b78 {
 208                                         compatible = "ti,dra7-dma-crossbar";
 209                                         reg = <0xb78 0xfc>;
 210                                         #dma-cells = <1>;
 211                                         dma-requests = <205>;
 212                                         ti,dma-safe-map = <0>;
 213                                         dma-masters = <&sdma>;
 214                                 };
 215
 216                                 edma_xbar: dma-router@c78 {
 217                                         compatible = "ti,dra7-dma-crossbar";
 218                                         reg = <0xc78 0x7c>;
 219                                         #dma-cells = <2>;
 220                                         dma-requests = <204>;
 221                                         ti,dma-safe-map = <0>;
 222                                         dma-masters = <&edma>;
 223                                 };
 224                         };
 225
 226                         cm_core_aon: cm_core_aon@5000 {
 227                                 compatible = "ti,dra7-cm-core-aon";
 228                                 reg = <0x5000 0x2000>;
 229
 230                                 cm_core_aon_clocks: clocks {
 231                                         #address-cells = <1>;
 232                                         #size-cells = <0>;
 233                                 };
 234
 235                                 cm_core_aon_clockdomains: clockdomains {
 236                                 };
 237                         };
 238
 239                         cm_core: cm_core@8000 {
 240                                 compatible = "ti,dra7-cm-core";
 241                                 reg = <0x8000 0x3000>;
 242
 243                                 cm_core_clocks: clocks {
 244                                         #address-cells = <1>;
 245                                         #size-cells = <0>;
 246                                 };
 247
 248                                 cm_core_clockdomains: clockdomains {
 249                                 };
 250                         };
 251                 };
 252
 253                 l4_wkup: l4@4ae00000 {
 254                         compatible = "ti,dra7-l4-wkup", "simple-bus";
 255                         #address-cells = <1>;
 256                         #size-cells = <1>;
 257                         ranges = <0 0x4ae00000 0x3f000>;
 258
 259                         counter32k: counter@4000 {
 260                                 compatible = "ti,omap-counter32k";
 261                                 reg = <0x4000 0x40>;
 262                                 ti,hwmods = "counter_32k";
 263                         };
 264
 265                         prm: prm@6000 {
 266                                 compatible = "ti,dra7-prm";
 267                                 reg = <0x6000 0x3000>;
 268                                 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 269
 270                                 prm_clocks: clocks {
 271                                         #address-cells = <1>;
 272                                         #size-cells = <0>;
 273                                 };
 274
 275                                 prm_clockdomains: clockdomains {
 276                                 };
 277                         };
 278
 279                         scm_wkup: scm_conf@c000 {
 280                                 compatible = "syscon";
 281                                 reg = <0xc000 0x1000>;
 282                         };
 283                 };
 284
 285                 axi@0 {
 286                         compatible = "simple-bus";
 287                         #size-cells = <1>;
 288                         #address-cells = <1>;
 289                         ranges = <0x51000000 0x51000000 0x3000
 290                                   0x0        0x20000000 0x10000000>;
 291                         /**
 292                          * To enable PCI endpoint mode, disable the pcie1_rc
 293                          * node and enable pcie1_ep mode.
 294                          */
 295                         pcie1_rc: pcie@51000000 {
 296                                 compatible = "ti,dra7-pcie";
 297                                 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 298                                 reg-names = "rc_dbics", "ti_conf", "config";
 299                                 interrupts = <0 232 0x4>, <0 233 0x4>;
 300                                 #address-cells = <3>;
 301                                 #size-cells = <2>;
 302                                 device_type = "pci";
 303                                 ranges = <0x81000000 0 0          0x03000 0 0x00010000
 304                                           0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 305                                 bus-range = <0x00 0xff>;
 306                                 #interrupt-cells = <1>;
 307                                 num-lanes = <1>;
 308                                 linux,pci-domain = <0>;
 309                                 ti,hwmods = "pcie1";
 310                                 phys = <&pcie1_phy>;
 311                                 phy-names = "pcie-phy0";
 312                                 interrupt-map-mask = <0 0 0 7>;
 313                                 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
 314                                                 <0 0 0 2 &pcie1_intc 2>,
 315                                                 <0 0 0 3 &pcie1_intc 3>,
 316                                                 <0 0 0 4 &pcie1_intc 4>;
 317                                 status = "disabled";
 318                                 pcie1_intc: interrupt-controller {
 319                                         interrupt-controller;
 320                                         #address-cells = <0>;
 321                                         #interrupt-cells = <1>;
 322                                 };
 323                         };
 324
 325                         pcie1_ep: pcie_ep@51000000 {
 326                                 compatible = "ti,dra7-pcie-ep";
 327                                 reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
 328                                 reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 329                                 interrupts = <0 232 0x4>;
 330                                 num-lanes = <1>;
 331                                 num-ib-windows = <4>;
 332                                 num-ob-windows = <16>;
 333                                 ti,hwmods = "pcie1";
 334                                 phys = <&pcie1_phy>;
 335                                 phy-names = "pcie-phy0";
 336                                 ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
 337                                 status = "disabled";
 338                         };
 339                 };
 340
 341                 axi@1 {
 342                         compatible = "simple-bus";
 343                         #size-cells = <1>;
 344                         #address-cells = <1>;
 345                         ranges = <0x51800000 0x51800000 0x3000
 346                                   0x0        0x30000000 0x10000000>;
 347                         status = "disabled";
 348                         pcie@51800000 {
 349                                 compatible = "ti,dra7-pcie";
 350                                 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 351                                 reg-names = "rc_dbics", "ti_conf", "config";
 352                                 interrupts = <0 355 0x4>, <0 356 0x4>;
 353                                 #address-cells = <3>;
 354                                 #size-cells = <2>;
 355                                 device_type = "pci";
 356                                 ranges = <0x81000000 0 0          0x03000 0 0x00010000
 357                                           0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 358                                 bus-range = <0x00 0xff>;
 359                                 #interrupt-cells = <1>;
 360                                 num-lanes = <1>;
 361                                 linux,pci-domain = <1>;
 362                                 ti,hwmods = "pcie2";
 363                                 phys = <&pcie2_phy>;
 364                                 phy-names = "pcie-phy0";
 365                                 interrupt-map-mask = <0 0 0 7>;
 366                                 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
 367                                                 <0 0 0 2 &pcie2_intc 2>,
 368                                                 <0 0 0 3 &pcie2_intc 3>,
 369                                                 <0 0 0 4 &pcie2_intc 4>;
 370                                 pcie2_intc: interrupt-controller {
 371                                         interrupt-controller;
 372                                         #address-cells = <0>;
 373                                         #interrupt-cells = <1>;
 374                                 };
 375                         };
 376                 };
 377
 378                 ocmcram1: ocmcram@40300000 {
 379                         compatible = "mmio-sram";
 380                         reg = <0x40300000 0x80000>;
 381                         ranges = <0x0 0x40300000 0x80000>;
 382                         #address-cells = <1>;
 383                         #size-cells = <1>;
 384                         /*
 385                          * This is a placeholder for an optional reserved
 386                          * region for use by secure software. The size
 387                          * of this region is not known until runtime so it
 388                          * is set as zero to either be updated to reserve
 389                          * space or left unchanged to leave all SRAM for use.
 390                          * On HS parts that that require the reserved region
 391                          * either the bootloader can update the size to
 392                          * the required amount or the node can be overridden
 393                          * from the board dts file for the secure platform.
 394                          */
 395                         sram-hs@0 {
 396                                 compatible = "ti,secure-ram";
 397                                 reg = <0x0 0x0>;
 398                         };
 399                 };
 400
 401                 /*
 402                  * NOTE: ocmcram2 and ocmcram3 are not available on all
 403                  * DRA7xx and AM57xx variants. Confirm availability in
 404                  * the data manual for the exact part number in use
 405                  * before enabling these nodes in the board dts file.
 406                  */
 407                 ocmcram2: ocmcram@40400000 {
 408                         status = "disabled";
 409                         compatible = "mmio-sram";
 410                         reg = <0x40400000 0x100000>;
 411                         ranges = <0x0 0x40400000 0x100000>;
 412                         #address-cells = <1>;
 413                         #size-cells = <1>;
 414                 };
 415
 416                 ocmcram3: ocmcram@40500000 {
 417                         status = "disabled";
 418                         compatible = "mmio-sram";
 419                         reg = <0x40500000 0x100000>;
 420                         ranges = <0x0 0x40500000 0x100000>;
 421                         #address-cells = <1>;
 422                         #size-cells = <1>;
 423                 };
 424
 425                 bandgap: bandgap@4a0021e0 {
 426                         reg = <0x4a0021e0 0xc
 427                                 0x4a00232c 0xc
 428                                 0x4a002380 0x2c
 429                                 0x4a0023C0 0x3c
 430                                 0x4a002564 0x8
 431                                 0x4a002574 0x50>;
 432                                 compatible = "ti,dra752-bandgap";
 433                                 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 434                                 #thermal-sensor-cells = <1>;
 435                 };
 436
 437                 dsp1_system: dsp_system@40d00000 {
 438                         compatible = "syscon";
 439                         reg = <0x40d00000 0x100>;
 440                 };
 441
 442                 dra7_iodelay_core: padconf@4844a000 {
 443                         compatible = "ti,dra7-iodelay";
 444                         reg = <0x4844a000 0x0d1c>;
 445                         #address-cells = <1>;
 446                         #size-cells = <0>;
 447                         #pinctrl-cells = <2>;
 448                 };
 449
 450                 sdma: dma-controller@4a056000 {
 451                         compatible = "ti,omap4430-sdma";
 452                         reg = <0x4a056000 0x1000>;
 453                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 454                                      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 455                                      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 456                                      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 457                         #dma-cells = <1>;
 458                         dma-channels = <32>;
 459                         dma-requests = <127>;
 460                 };
 461
 462                 edma: edma@43300000 {
 463                         compatible = "ti,edma3-tpcc";
 464                         ti,hwmods = "tpcc";
 465                         reg = <0x43300000 0x100000>;
 466                         reg-names = "edma3_cc";
 467                         interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 468                                      <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 469                                      <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 470                         interrupt-names = "edma3_ccint", "edma3_mperr",
 471                                           "edma3_ccerrint";
 472                         dma-requests = <64>;
 473                         #dma-cells = <2>;
 474
 475                         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
 476
 477                         /*
 478                          * memcpy is disabled, can be enabled with:
 479                          * ti,edma-memcpy-channels = <20 21>;
 480                          * for example. Note that these channels need to be
 481                          * masked in the xbar as well.
 482                          */
 483                 };
 484
 485                 edma_tptc0: tptc@43400000 {
 486                         compatible = "ti,edma3-tptc";
 487                         ti,hwmods = "tptc0";
 488                         reg =   <0x43400000 0x100000>;
 489                         interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 490                         interrupt-names = "edma3_tcerrint";
 491                 };
 492
 493                 edma_tptc1: tptc@43500000 {
 494                         compatible = "ti,edma3-tptc";
 495                         ti,hwmods = "tptc1";
 496                         reg =   <0x43500000 0x100000>;
 497                         interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 498                         interrupt-names = "edma3_tcerrint";
 499                 };
 500
 501                 gpio1: gpio@4ae10000 {
 502                         compatible = "ti,omap4-gpio";
 503                         reg = <0x4ae10000 0x200>;
 504                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 505                         ti,hwmods = "gpio1";
 506                         gpio-controller;
 507                         #gpio-cells = <2>;
 508                         interrupt-controller;
 509                         #interrupt-cells = <2>;
 510                 };
 511
 512                 gpio2: gpio@48055000 {
 513                         compatible = "ti,omap4-gpio";
 514                         reg = <0x48055000 0x200>;
 515                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 516                         ti,hwmods = "gpio2";
 517                         gpio-controller;
 518                         #gpio-cells = <2>;
 519                         interrupt-controller;
 520                         #interrupt-cells = <2>;
 521                 };
 522
 523                 gpio3: gpio@48057000 {
 524                         compatible = "ti,omap4-gpio";
 525                         reg = <0x48057000 0x200>;
 526                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 527                         ti,hwmods = "gpio3";
 528                         gpio-controller;
 529                         #gpio-cells = <2>;
 530                         interrupt-controller;
 531                         #interrupt-cells = <2>;
 532                 };
 533
 534                 gpio4: gpio@48059000 {
 535                         compatible = "ti,omap4-gpio";
 536                         reg = <0x48059000 0x200>;
 537                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 538                         ti,hwmods = "gpio4";
 539                         gpio-controller;
 540                         #gpio-cells = <2>;
 541                         interrupt-controller;
 542                         #interrupt-cells = <2>;
 543                 };
 544
 545                 gpio5: gpio@4805b000 {
 546                         compatible = "ti,omap4-gpio";
 547                         reg = <0x4805b000 0x200>;
 548                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 549                         ti,hwmods = "gpio5";
 550                         gpio-controller;
 551                         #gpio-cells = <2>;
 552                         interrupt-controller;
 553                         #interrupt-cells = <2>;
 554                 };
 555
 556                 gpio6: gpio@4805d000 {
 557                         compatible = "ti,omap4-gpio";
 558                         reg = <0x4805d000 0x200>;
 559                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 560                         ti,hwmods = "gpio6";
 561                         gpio-controller;
 562                         #gpio-cells = <2>;
 563                         interrupt-controller;
 564                         #interrupt-cells = <2>;
 565                 };
 566
 567                 gpio7: gpio@48051000 {
 568                         compatible = "ti,omap4-gpio";
 569                         reg = <0x48051000 0x200>;
 570                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 571                         ti,hwmods = "gpio7";
 572                         gpio-controller;
 573                         #gpio-cells = <2>;
 574                         interrupt-controller;
 575                         #interrupt-cells = <2>;
 576                 };
 577
 578                 gpio8: gpio@48053000 {
 579                         compatible = "ti,omap4-gpio";
 580                         reg = <0x48053000 0x200>;
 581                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 582                         ti,hwmods = "gpio8";
 583                         gpio-controller;
 584                         #gpio-cells = <2>;
 585                         interrupt-controller;
 586                         #interrupt-cells = <2>;
 587                 };
 588
 589                 uart1: serial@4806a000 {
 590                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 591                         reg = <0x4806a000 0x100>;
 592                         interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 593                         ti,hwmods = "uart1";
 594                         clock-frequency = <48000000>;
 595                         status = "disabled";
 596                         dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 597                         dma-names = "tx", "rx";
 598                 };
 599
 600                 uart2: serial@4806c000 {
 601                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 602                         reg = <0x4806c000 0x100>;
 603                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 604                         ti,hwmods = "uart2";
 605                         clock-frequency = <48000000>;
 606                         status = "disabled";
 607                         dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
 608                         dma-names = "tx", "rx";
 609                 };
 610
 611                 uart3: serial@48020000 {
 612                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 613                         reg = <0x48020000 0x100>;
 614                         interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 615                         ti,hwmods = "uart3";
 616                         clock-frequency = <48000000>;
 617                         status = "disabled";
 618                         dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
 619                         dma-names = "tx", "rx";
 620                 };
 621
 622                 uart4: serial@4806e000 {
 623                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 624                         reg = <0x4806e000 0x100>;
 625                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 626                         ti,hwmods = "uart4";
 627                         clock-frequency = <48000000>;
 628                         status = "disabled";
 629                         dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 630                         dma-names = "tx", "rx";
 631                 };
 632
 633                 uart5: serial@48066000 {
 634                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 635                         reg = <0x48066000 0x100>;
 636                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 637                         ti,hwmods = "uart5";
 638                         clock-frequency = <48000000>;
 639                         status = "disabled";
 640                         dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
 641                         dma-names = "tx", "rx";
 642                 };
 643
 644                 uart6: serial@48068000 {
 645                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 646                         reg = <0x48068000 0x100>;
 647                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 648                         ti,hwmods = "uart6";
 649                         clock-frequency = <48000000>;
 650                         status = "disabled";
 651                         dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
 652                         dma-names = "tx", "rx";
 653                 };
 654
 655                 uart7: serial@48420000 {
 656                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 657                         reg = <0x48420000 0x100>;
 658                         interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 659                         ti,hwmods = "uart7";
 660                         clock-frequency = <48000000>;
 661                         status = "disabled";
 662                 };
 663
 664                 uart8: serial@48422000 {
 665                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 666                         reg = <0x48422000 0x100>;
 667                         interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 668                         ti,hwmods = "uart8";
 669                         clock-frequency = <48000000>;
 670                         status = "disabled";
 671                 };
 672
 673                 uart9: serial@48424000 {
 674                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 675                         reg = <0x48424000 0x100>;
 676                         interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 677                         ti,hwmods = "uart9";
 678                         clock-frequency = <48000000>;
 679                         status = "disabled";
 680                 };
 681
 682                 uart10: serial@4ae2b000 {
 683                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 684                         reg = <0x4ae2b000 0x100>;
 685                         interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 686                         ti,hwmods = "uart10";
 687                         clock-frequency = <48000000>;
 688                         status = "disabled";
 689                 };
 690
 691                 mailbox1: mailbox@4a0f4000 {
 692                         compatible = "ti,omap4-mailbox";
 693                         reg = <0x4a0f4000 0x200>;
 694                         interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 695                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 696                                      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 697                         ti,hwmods = "mailbox1";
 698                         #mbox-cells = <1>;
 699                         ti,mbox-num-users = <3>;
 700                         ti,mbox-num-fifos = <8>;
 701                         status = "disabled";
 702                 };
 703
 704                 mailbox2: mailbox@4883a000 {
 705                         compatible = "ti,omap4-mailbox";
 706                         reg = <0x4883a000 0x200>;
 707                         interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
 708                                      <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
 709                                      <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
 710                                      <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 711                         ti,hwmods = "mailbox2";
 712                         #mbox-cells = <1>;
 713                         ti,mbox-num-users = <4>;
 714                         ti,mbox-num-fifos = <12>;
 715                         status = "disabled";
 716                 };
 717
 718                 mailbox3: mailbox@4883c000 {
 719                         compatible = "ti,omap4-mailbox";
 720                         reg = <0x4883c000 0x200>;
 721                         interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 722                                      <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
 723                                      <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
 724                                      <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
 725                         ti,hwmods = "mailbox3";
 726                         #mbox-cells = <1>;
 727                         ti,mbox-num-users = <4>;
 728                         ti,mbox-num-fifos = <12>;
 729                         status = "disabled";
 730                 };
 731
 732                 mailbox4: mailbox@4883e000 {
 733                         compatible = "ti,omap4-mailbox";
 734                         reg = <0x4883e000 0x200>;
 735                         interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 736                                      <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
 737                                      <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
 738                                      <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 739                         ti,hwmods = "mailbox4";
 740                         #mbox-cells = <1>;
 741                         ti,mbox-num-users = <4>;
 742                         ti,mbox-num-fifos = <12>;
 743                         status = "disabled";
 744                 };
 745
 746                 mailbox5: mailbox@48840000 {
 747                         compatible = "ti,omap4-mailbox";
 748                         reg = <0x48840000 0x200>;
 749                         interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
 750                                      <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
 751                                      <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
 752                                      <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 753                         ti,hwmods = "mailbox5";
 754                         #mbox-cells = <1>;
 755                         ti,mbox-num-users = <4>;
 756                         ti,mbox-num-fifos = <12>;
 757                         status = "disabled";
 758                 };
 759
 760                 mailbox6: mailbox@48842000 {
 761                         compatible = "ti,omap4-mailbox";
 762                         reg = <0x48842000 0x200>;
 763                         interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
 764                                      <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 765                                      <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
 766                                      <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
 767                         ti,hwmods = "mailbox6";
 768                         #mbox-cells = <1>;
 769                         ti,mbox-num-users = <4>;
 770                         ti,mbox-num-fifos = <12>;
 771                         status = "disabled";
 772                 };
 773
 774                 mailbox7: mailbox@48844000 {
 775                         compatible = "ti,omap4-mailbox";
 776                         reg = <0x48844000 0x200>;
 777                         interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
 778                                      <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
 779                                      <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
 780                                      <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
 781                         ti,hwmods = "mailbox7";
 782                         #mbox-cells = <1>;
 783                         ti,mbox-num-users = <4>;
 784                         ti,mbox-num-fifos = <12>;
 785                         status = "disabled";
 786                 };
 787
 788                 mailbox8: mailbox@48846000 {
 789                         compatible = "ti,omap4-mailbox";
 790                         reg = <0x48846000 0x200>;
 791                         interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 792                                      <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
 793                                      <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
 794                                      <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
 795                         ti,hwmods = "mailbox8";
 796                         #mbox-cells = <1>;
 797                         ti,mbox-num-users = <4>;
 798                         ti,mbox-num-fifos = <12>;
 799                         status = "disabled";
 800                 };
 801
 802                 mailbox9: mailbox@4885e000 {
 803                         compatible = "ti,omap4-mailbox";
 804                         reg = <0x4885e000 0x200>;
 805                         interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
 806                                      <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
 807                                      <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
 808                                      <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 809                         ti,hwmods = "mailbox9";
 810                         #mbox-cells = <1>;
 811                         ti,mbox-num-users = <4>;
 812                         ti,mbox-num-fifos = <12>;
 813                         status = "disabled";
 814                 };
 815
 816                 mailbox10: mailbox@48860000 {
 817                         compatible = "ti,omap4-mailbox";
 818                         reg = <0x48860000 0x200>;
 819                         interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
 820                                      <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
 821                                      <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
 822                                      <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 823                         ti,hwmods = "mailbox10";
 824                         #mbox-cells = <1>;
 825                         ti,mbox-num-users = <4>;
 826                         ti,mbox-num-fifos = <12>;
 827                         status = "disabled";
 828                 };
 829
 830                 mailbox11: mailbox@48862000 {
 831                         compatible = "ti,omap4-mailbox";
 832                         reg = <0x48862000 0x200>;
 833                         interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
 834                                      <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
 835                                      <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
 836                                      <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
 837                         ti,hwmods = "mailbox11";
 838                         #mbox-cells = <1>;
 839                         ti,mbox-num-users = <4>;
 840                         ti,mbox-num-fifos = <12>;
 841                         status = "disabled";
 842                 };
 843
 844                 mailbox12: mailbox@48864000 {
 845                         compatible = "ti,omap4-mailbox";
 846                         reg = <0x48864000 0x200>;
 847                         interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
 848                                      <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
 849                                      <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 850                                      <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
 851                         ti,hwmods = "mailbox12";
 852                         #mbox-cells = <1>;
 853                         ti,mbox-num-users = <4>;
 854                         ti,mbox-num-fifos = <12>;
 855                         status = "disabled";
 856                 };
 857
 858                 mailbox13: mailbox@48802000 {
 859                         compatible = "ti,omap4-mailbox";
 860                         reg = <0x48802000 0x200>;
 861                         interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
 862                                      <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
 863                                      <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
 864                                      <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
 865                         ti,hwmods = "mailbox13";
 866                         #mbox-cells = <1>;
 867                         ti,mbox-num-users = <4>;
 868                         ti,mbox-num-fifos = <12>;
 869                         status = "disabled";
 870                 };
 871
 872                 timer1: timer@4ae18000 {
 873                         compatible = "ti,omap5430-timer";
 874                         reg = <0x4ae18000 0x80>;
 875                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 876                         ti,hwmods = "timer1";
 877                         ti,timer-alwon;
 878                 };
 879
 880                 timer2: timer@48032000 {
 881                         compatible = "ti,omap5430-timer";
 882                         reg = <0x48032000 0x80>;
 883                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 884                         ti,hwmods = "timer2";
 885                 };
 886
 887                 timer3: timer@48034000 {
 888                         compatible = "ti,omap5430-timer";
 889                         reg = <0x48034000 0x80>;
 890                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 891                         ti,hwmods = "timer3";
 892                 };
 893
 894                 timer4: timer@48036000 {
 895                         compatible = "ti,omap5430-timer";
 896                         reg = <0x48036000 0x80>;
 897                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 898                         ti,hwmods = "timer4";
 899                 };
 900
 901                 timer5: timer@48820000 {
 902                         compatible = "ti,omap5430-timer";
 903                         reg = <0x48820000 0x80>;
 904                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 905                         ti,hwmods = "timer5";
 906                 };
 907
 908                 timer6: timer@48822000 {
 909                         compatible = "ti,omap5430-timer";
 910                         reg = <0x48822000 0x80>;
 911                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 912                         ti,hwmods = "timer6";
 913                 };
 914
 915                 timer7: timer@48824000 {
 916                         compatible = "ti,omap5430-timer";
 917                         reg = <0x48824000 0x80>;
 918                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 919                         ti,hwmods = "timer7";
 920                 };
 921
 922                 timer8: timer@48826000 {
 923                         compatible = "ti,omap5430-timer";
 924                         reg = <0x48826000 0x80>;
 925                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 926                         ti,hwmods = "timer8";
 927                 };
 928
 929                 timer9: timer@4803e000 {
 930                         compatible = "ti,omap5430-timer";
 931                         reg = <0x4803e000 0x80>;
 932                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 933                         ti,hwmods = "timer9";
 934                 };
 935
 936                 timer10: timer@48086000 {
 937                         compatible = "ti,omap5430-timer";
 938                         reg = <0x48086000 0x80>;
 939                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 940                         ti,hwmods = "timer10";
 941                 };
 942
 943                 timer11: timer@48088000 {
 944                         compatible = "ti,omap5430-timer";
 945                         reg = <0x48088000 0x80>;
 946                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 947                         ti,hwmods = "timer11";
 948                 };
 949
 950                 timer12: timer@4ae20000 {
 951                         compatible = "ti,omap5430-timer";
 952                         reg = <0x4ae20000 0x80>;
 953                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 954                         ti,hwmods = "timer12";
 955                         ti,timer-alwon;
 956                         ti,timer-secure;
 957                 };
 958
 959                 timer13: timer@48828000 {
 960                         compatible = "ti,omap5430-timer";
 961                         reg = <0x48828000 0x80>;
 962                         interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 963                         ti,hwmods = "timer13";
 964                 };
 965
 966                 timer14: timer@4882a000 {
 967                         compatible = "ti,omap5430-timer";
 968                         reg = <0x4882a000 0x80>;
 969                         interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
 970                         ti,hwmods = "timer14";
 971                 };
 972
 973                 timer15: timer@4882c000 {
 974                         compatible = "ti,omap5430-timer";
 975                         reg = <0x4882c000 0x80>;
 976                         interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 977                         ti,hwmods = "timer15";
 978                 };
 979
 980                 timer16: timer@4882e000 {
 981                         compatible = "ti,omap5430-timer";
 982                         reg = <0x4882e000 0x80>;
 983                         interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
 984                         ti,hwmods = "timer16";
 985                 };
 986
 987                 wdt2: wdt@4ae14000 {
 988                         compatible = "ti,omap3-wdt";
 989                         reg = <0x4ae14000 0x80>;
 990                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 991                         ti,hwmods = "wd_timer2";
 992                 };
 993
 994                 hwspinlock: spinlock@4a0f6000 {
 995                         compatible = "ti,omap4-hwspinlock";
 996                         reg = <0x4a0f6000 0x1000>;
 997                         ti,hwmods = "spinlock";
 998                         #hwlock-cells = <1>;
 999                 };
1000
1001                 dmm@4e000000 {
1002                         compatible = "ti,omap5-dmm";
1003                         reg = <0x4e000000 0x800>;
1004                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1005                         ti,hwmods = "dmm";
1006                 };
1007
1008                 i2c1: i2c@48070000 {
1009                         compatible = "ti,omap4-i2c";
1010                         reg = <0x48070000 0x100>;
1011                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1012                         #address-cells = <1>;
1013                         #size-cells = <0>;
1014                         ti,hwmods = "i2c1";
1015                         status = "disabled";
1016                 };
1017
1018                 i2c2: i2c@48072000 {
1019                         compatible = "ti,omap4-i2c";
1020                         reg = <0x48072000 0x100>;
1021                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
1022                         #address-cells = <1>;
1023                         #size-cells = <0>;
1024                         ti,hwmods = "i2c2";
1025                         status = "disabled";
1026                 };
1027
1028                 i2c3: i2c@48060000 {
1029                         compatible = "ti,omap4-i2c";
1030                         reg = <0x48060000 0x100>;
1031                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
1032                         #address-cells = <1>;
1033                         #size-cells = <0>;
1034                         ti,hwmods = "i2c3";
1035                         status = "disabled";
1036                 };
1037
1038                 i2c4: i2c@4807a000 {
1039                         compatible = "ti,omap4-i2c";
1040                         reg = <0x4807a000 0x100>;
1041                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
1042                         #address-cells = <1>;
1043                         #size-cells = <0>;
1044                         ti,hwmods = "i2c4";
1045                         status = "disabled";
1046                 };
1047
1048                 i2c5: i2c@4807c000 {
1049                         compatible = "ti,omap4-i2c";
1050                         reg = <0x4807c000 0x100>;
1051                         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1052                         #address-cells = <1>;
1053                         #size-cells = <0>;
1054                         ti,hwmods = "i2c5";
1055                         status = "disabled";
1056                 };
1057
1058                 mmc1: mmc@4809c000 {
1059                         compatible = "ti,omap4-hsmmc";
1060                         reg = <0x4809c000 0x400>;
1061                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1062                         ti,hwmods = "mmc1";
1063                         ti,dual-volt;
1064                         ti,needs-special-reset;
1065                         dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
1066                         dma-names = "tx", "rx";
1067                         status = "disabled";
1068                         pbias-supply = <&pbias_mmc_reg>;
1069                         max-frequency = <192000000>;
1070                 };
1071
1072                 mmc2: mmc@480b4000 {
1073                         compatible = "ti,omap4-hsmmc";
1074                         reg = <0x480b4000 0x400>;
1075                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1076                         ti,hwmods = "mmc2";
1077                         ti,needs-special-reset;
1078                         dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
1079                         dma-names = "tx", "rx";
1080                         status = "disabled";
1081                         max-frequency = <192000000>;
1082                 };
1083
1084                 mmc3: mmc@480ad000 {
1085                         compatible = "ti,omap4-hsmmc";
1086                         reg = <0x480ad000 0x400>;
1087                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1088                         ti,hwmods = "mmc3";
1089                         ti,needs-special-reset;
1090                         dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
1091                         dma-names = "tx", "rx";
1092                         status = "disabled";
1093                         /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
1094                         max-frequency = <64000000>;
1095                 };
1096
1097                 mmc4: mmc@480d1000 {
1098                         compatible = "ti,omap4-hsmmc";
1099                         reg = <0x480d1000 0x400>;
1100                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1101                         ti,hwmods = "mmc4";
1102                         ti,needs-special-reset;
1103                         dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
1104                         dma-names = "tx", "rx";
1105                         status = "disabled";
1106                         max-frequency = <192000000>;
1107                 };
1108
1109                 mmu0_dsp1: mmu@40d01000 {
1110                         compatible = "ti,dra7-dsp-iommu";
1111                         reg = <0x40d01000 0x100>;
1112                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1113                         ti,hwmods = "mmu0_dsp1";
1114                         #iommu-cells = <0>;
1115                         ti,syscon-mmuconfig = <&dsp1_system 0x0>;
1116                         status = "disabled";
1117                 };
1118
1119                 mmu1_dsp1: mmu@40d02000 {
1120                         compatible = "ti,dra7-dsp-iommu";
1121                         reg = <0x40d02000 0x100>;
1122                         interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
1123                         ti,hwmods = "mmu1_dsp1";
1124                         #iommu-cells = <0>;
1125                         ti,syscon-mmuconfig = <&dsp1_system 0x1>;
1126                         status = "disabled";
1127                 };
1128
1129                 mmu_ipu1: mmu@58882000 {
1130                         compatible = "ti,dra7-iommu";
1131                         reg = <0x58882000 0x100>;
1132                         interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
1133                         ti,hwmods = "mmu_ipu1";
1134                         #iommu-cells = <0>;
1135                         ti,iommu-bus-err-back;
1136                         status = "disabled";
1137                 };
1138
1139                 mmu_ipu2: mmu@55082000 {
1140                         compatible = "ti,dra7-iommu";
1141                         reg = <0x55082000 0x100>;
1142                         interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
1143                         ti,hwmods = "mmu_ipu2";
1144                         #iommu-cells = <0>;
1145                         ti,iommu-bus-err-back;
1146                         status = "disabled";
1147                 };
1148
1149                 abb_mpu: regulator-abb-mpu {
1150                         compatible = "ti,abb-v3";
1151                         regulator-name = "abb_mpu";
1152                         #address-cells = <0>;
1153                         #size-cells = <0>;
1154                         clocks = <&sys_clkin1>;
1155                         ti,settling-time = <50>;
1156                         ti,clock-cycles = <16>;
1157
1158                         reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
1159                               <0x4ae06014 0x4>, <0x4a003b20 0xc>,
1160                               <0x4ae0c158 0x4>;
1161                         reg-names = "setup-address", "control-address",
1162                                     "int-address", "efuse-address",
1163                                     "ldo-address";
1164                         ti,tranxdone-status-mask = <0x80>;
1165                         /* LDOVBBMPU_FBB_MUX_CTRL */
1166                         ti,ldovbb-override-mask = <0x400>;
1167                         /* LDOVBBMPU_FBB_VSET_OUT */
1168                         ti,ldovbb-vset-mask = <0x1F>;
1169
1170                         /*
1171                          * NOTE: only FBB mode used but actual vset will
1172                          * determine final biasing
1173                          */
1174                         ti,abb_info = <
1175                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1176                         1060000         0       0x0     0 0x02000000 0x01F00000
1177                         1160000         0       0x4     0 0x02000000 0x01F00000
1178                         1210000         0       0x8     0 0x02000000 0x01F00000
1179                         >;
1180                 };
1181
1182                 abb_ivahd: regulator-abb-ivahd {
1183                         compatible = "ti,abb-v3";
1184                         regulator-name = "abb_ivahd";
1185                         #address-cells = <0>;
1186                         #size-cells = <0>;
1187                         clocks = <&sys_clkin1>;
1188                         ti,settling-time = <50>;
1189                         ti,clock-cycles = <16>;
1190
1191                         reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
1192                               <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
1193                               <0x4a002470 0x4>;
1194                         reg-names = "setup-address", "control-address",
1195                                     "int-address", "efuse-address",
1196                                     "ldo-address";
1197                         ti,tranxdone-status-mask = <0x40000000>;
1198                         /* LDOVBBIVA_FBB_MUX_CTRL */
1199                         ti,ldovbb-override-mask = <0x400>;
1200                         /* LDOVBBIVA_FBB_VSET_OUT */
1201                         ti,ldovbb-vset-mask = <0x1F>;
1202
1203                         /*
1204                          * NOTE: only FBB mode used but actual vset will
1205                          * determine final biasing
1206                          */
1207                         ti,abb_info = <
1208                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1209                         1055000         0       0x0     0 0x02000000 0x01F00000
1210                         1150000         0       0x4     0 0x02000000 0x01F00000
1211                         1250000         0       0x8     0 0x02000000 0x01F00000
1212                         >;
1213                 };
1214
1215                 abb_dspeve: regulator-abb-dspeve {
1216                         compatible = "ti,abb-v3";
1217                         regulator-name = "abb_dspeve";
1218                         #address-cells = <0>;
1219                         #size-cells = <0>;
1220                         clocks = <&sys_clkin1>;
1221                         ti,settling-time = <50>;
1222                         ti,clock-cycles = <16>;
1223
1224                         reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
1225                               <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
1226                               <0x4a00246c 0x4>;
1227                         reg-names = "setup-address", "control-address",
1228                                     "int-address", "efuse-address",
1229                                     "ldo-address";
1230                         ti,tranxdone-status-mask = <0x20000000>;
1231                         /* LDOVBBDSPEVE_FBB_MUX_CTRL */
1232                         ti,ldovbb-override-mask = <0x400>;
1233                         /* LDOVBBDSPEVE_FBB_VSET_OUT */
1234                         ti,ldovbb-vset-mask = <0x1F>;
1235
1236                         /*
1237                          * NOTE: only FBB mode used but actual vset will
1238                          * determine final biasing
1239                          */
1240                         ti,abb_info = <
1241                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1242                         1055000         0       0x0     0 0x02000000 0x01F00000
1243                         1150000         0       0x4     0 0x02000000 0x01F00000
1244                         1250000         0       0x8     0 0x02000000 0x01F00000
1245                         >;
1246                 };
1247
1248                 abb_gpu: regulator-abb-gpu {
1249                         compatible = "ti,abb-v3";
1250                         regulator-name = "abb_gpu";
1251                         #address-cells = <0>;
1252                         #size-cells = <0>;
1253                         clocks = <&sys_clkin1>;
1254                         ti,settling-time = <50>;
1255                         ti,clock-cycles = <16>;
1256
1257                         reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
1258                               <0x4ae06010 0x4>, <0x4a003b08 0xc>,
1259                               <0x4ae0c154 0x4>;
1260                         reg-names = "setup-address", "control-address",
1261                                     "int-address", "efuse-address",
1262                                     "ldo-address";
1263                         ti,tranxdone-status-mask = <0x10000000>;
1264                         /* LDOVBBGPU_FBB_MUX_CTRL */
1265                         ti,ldovbb-override-mask = <0x400>;
1266                         /* LDOVBBGPU_FBB_VSET_OUT */
1267                         ti,ldovbb-vset-mask = <0x1F>;
1268
1269                         /*
1270                          * NOTE: only FBB mode used but actual vset will
1271                          * determine final biasing
1272                          */
1273                         ti,abb_info = <
1274                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1275                         1090000         0       0x0     0 0x02000000 0x01F00000
1276                         1210000         0       0x4     0 0x02000000 0x01F00000
1277                         1280000         0       0x8     0 0x02000000 0x01F00000
1278                         >;
1279                 };
1280
1281                 mcspi1: spi@48098000 {
1282                         compatible = "ti,omap4-mcspi";
1283                         reg = <0x48098000 0x200>;
1284                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1285                         #address-cells = <1>;
1286                         #size-cells = <0>;
1287                         ti,hwmods = "mcspi1";
1288                         ti,spi-num-cs = <4>;
1289                         dmas = <&sdma_xbar 35>,
1290                                <&sdma_xbar 36>,
1291                                <&sdma_xbar 37>,
1292                                <&sdma_xbar 38>,
1293                                <&sdma_xbar 39>,
1294                                <&sdma_xbar 40>,
1295                                <&sdma_xbar 41>,
1296                                <&sdma_xbar 42>;
1297                         dma-names = "tx0", "rx0", "tx1", "rx1",
1298                                     "tx2", "rx2", "tx3", "rx3";
1299                         status = "disabled";
1300                 };
1301
1302                 mcspi2: spi@4809a000 {
1303                         compatible = "ti,omap4-mcspi";
1304                         reg = <0x4809a000 0x200>;
1305                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1306                         #address-cells = <1>;
1307                         #size-cells = <0>;
1308                         ti,hwmods = "mcspi2";
1309                         ti,spi-num-cs = <2>;
1310                         dmas = <&sdma_xbar 43>,
1311                                <&sdma_xbar 44>,
1312                                <&sdma_xbar 45>,
1313                                <&sdma_xbar 46>;
1314                         dma-names = "tx0", "rx0", "tx1", "rx1";
1315                         status = "disabled";
1316                 };
1317
1318                 mcspi3: spi@480b8000 {
1319                         compatible = "ti,omap4-mcspi";
1320                         reg = <0x480b8000 0x200>;
1321                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1322                         #address-cells = <1>;
1323                         #size-cells = <0>;
1324                         ti,hwmods = "mcspi3";
1325                         ti,spi-num-cs = <2>;
1326                         dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
1327                         dma-names = "tx0", "rx0";
1328                         status = "disabled";
1329                 };
1330
1331                 mcspi4: spi@480ba000 {
1332                         compatible = "ti,omap4-mcspi";
1333                         reg = <0x480ba000 0x200>;
1334                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1335                         #address-cells = <1>;
1336                         #size-cells = <0>;
1337                         ti,hwmods = "mcspi4";
1338                         ti,spi-num-cs = <1>;
1339                         dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
1340                         dma-names = "tx0", "rx0";
1341                         status = "disabled";
1342                 };
1343
1344                 qspi: qspi@4b300000 {
1345                         compatible = "ti,dra7xxx-qspi";
1346                         reg = <0x4b300000 0x100>,
1347                               <0x5c000000 0x4000000>;
1348                         reg-names = "qspi_base", "qspi_mmap";
1349                         syscon-chipselects = <&scm_conf 0x558>;
1350                         #address-cells = <1>;
1351                         #size-cells = <0>;
1352                         ti,hwmods = "qspi";
1353                         clocks = <&qspi_gfclk_div>;
1354                         clock-names = "fck";
1355                         num-cs = <4>;
1356                         interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
1357                         status = "disabled";
1358                 };
1359
1360                 /* OCP2SCP3 */
1361                 ocp2scp@4a090000 {
1362                         compatible = "ti,omap-ocp2scp";
1363                         #address-cells = <1>;
1364                         #size-cells = <1>;
1365                         ranges;
1366                         reg = <0x4a090000 0x20>;
1367                         ti,hwmods = "ocp2scp3";
1368                         sata_phy: phy@4A096000 {
1369                                 compatible = "ti,phy-pipe3-sata";
1370                                 reg = <0x4A096000 0x80>, /* phy_rx */
1371                                       <0x4A096400 0x64>, /* phy_tx */
1372                                       <0x4A096800 0x40>; /* pll_ctrl */
1373                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1374                                 syscon-phy-power = <&scm_conf 0x374>;
1375                                 clocks = <&sys_clkin1>, <&sata_ref_clk>;
1376                                 clock-names = "sysclk", "refclk";
1377                                 syscon-pllreset = <&scm_conf 0x3fc>;
1378                                 #phy-cells = <0>;
1379                         };
1380
1381                         pcie1_phy: pciephy@4a094000 {
1382                                 compatible = "ti,phy-pipe3-pcie";
1383                                 reg = <0x4a094000 0x80>, /* phy_rx */
1384                                       <0x4a094400 0x64>; /* phy_tx */
1385                                 reg-names = "phy_rx", "phy_tx";
1386                                 syscon-phy-power = <&scm_conf_pcie 0x1c>;
1387                                 syscon-pcs = <&scm_conf_pcie 0x10>;
1388                                 clocks = <&dpll_pcie_ref_ck>,
1389                                          <&dpll_pcie_ref_m2ldo_ck>,
1390                                          <&optfclk_pciephy1_32khz>,
1391                                          <&optfclk_pciephy1_clk>,
1392                                          <&optfclk_pciephy1_div_clk>,
1393                                          <&optfclk_pciephy_div>,
1394                                          <&sys_clkin1>;
1395                                 clock-names = "dpll_ref", "dpll_ref_m2",
1396                                               "wkupclk", "refclk",
1397                                               "div-clk", "phy-div", "sysclk";
1398                                 #phy-cells = <0>;
1399                         };
1400
1401                         pcie2_phy: pciephy@4a095000 {
1402                                 compatible = "ti,phy-pipe3-pcie";
1403                                 reg = <0x4a095000 0x80>, /* phy_rx */
1404                                       <0x4a095400 0x64>; /* phy_tx */
1405                                 reg-names = "phy_rx", "phy_tx";
1406                                 syscon-phy-power = <&scm_conf_pcie 0x20>;
1407                                 syscon-pcs = <&scm_conf_pcie 0x10>;
1408                                 clocks = <&dpll_pcie_ref_ck>,
1409                                          <&dpll_pcie_ref_m2ldo_ck>,
1410                                          <&optfclk_pciephy2_32khz>,
1411                                          <&optfclk_pciephy2_clk>,
1412                                          <&optfclk_pciephy2_div_clk>,
1413                                          <&optfclk_pciephy_div>,
1414                                          <&sys_clkin1>;
1415                                 clock-names = "dpll_ref", "dpll_ref_m2",
1416                                               "wkupclk", "refclk",
1417                                               "div-clk", "phy-div", "sysclk";
1418                                 #phy-cells = <0>;
1419                                 status = "disabled";
1420                         };
1421                 };
1422
1423                 sata: sata@4a141100 {
1424                         compatible = "snps,dwc-ahci";
1425                         reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1426                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1427                         phys = <&sata_phy>;
1428                         phy-names = "sata-phy";
1429                         clocks = <&sata_ref_clk>;
1430                         ti,hwmods = "sata";
1431                         ports-implemented = <0x1>;
1432                 };
1433
1434                 rtc: rtc@48838000 {
1435                         compatible = "ti,am3352-rtc";
1436                         reg = <0x48838000 0x100>;
1437                         interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
1438                                      <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
1439                         ti,hwmods = "rtcss";
1440                         clocks = <&sys_32k_ck>;
1441                 };
1442
1443                 /* OCP2SCP1 */
1444                 ocp2scp@4a080000 {
1445                         compatible = "ti,omap-ocp2scp";
1446                         #address-cells = <1>;
1447                         #size-cells = <1>;
1448                         ranges;
1449                         reg = <0x4a080000 0x20>;
1450                         ti,hwmods = "ocp2scp1";
1451
1452                         usb2_phy1: phy@4a084000 {
1453                                 compatible = "ti,dra7x-usb2", "ti,omap-usb2";
1454                                 reg = <0x4a084000 0x400>;
1455                                 syscon-phy-power = <&scm_conf 0x300>;
1456                                 clocks = <&usb_phy1_always_on_clk32k>,
1457                                          <&usb_otg_ss1_refclk960m>;
1458                                 clock-names =   "wkupclk",
1459                                                 "refclk";
1460                                 #phy-cells = <0>;
1461                         };
1462
1463                         usb2_phy2: phy@4a085000 {
1464                                 compatible = "ti,dra7x-usb2-phy2",
1465                                              "ti,omap-usb2";
1466                                 reg = <0x4a085000 0x400>;
1467                                 syscon-phy-power = <&scm_conf 0xe74>;
1468                                 clocks = <&usb_phy2_always_on_clk32k>,
1469                                          <&usb_otg_ss2_refclk960m>;
1470                                 clock-names =   "wkupclk",
1471                                                 "refclk";
1472                                 #phy-cells = <0>;
1473                         };
1474
1475                         usb3_phy1: phy@4a084400 {
1476                                 compatible = "ti,omap-usb3";
1477                                 reg = <0x4a084400 0x80>,
1478                                       <0x4a084800 0x64>,
1479                                       <0x4a084c00 0x40>;
1480                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1481                                 syscon-phy-power = <&scm_conf 0x370>;
1482                                 clocks = <&usb_phy3_always_on_clk32k>,
1483                                          <&sys_clkin1>,
1484                                          <&usb_otg_ss1_refclk960m>;
1485                                 clock-names =   "wkupclk",
1486                                                 "sysclk",
1487                                                 "refclk";
1488                                 #phy-cells = <0>;
1489                         };
1490                 };
1491
1492                 omap_dwc3_1: omap_dwc3_1@48880000 {
1493                         compatible = "ti,dwc3";
1494                         ti,hwmods = "usb_otg_ss1";
1495                         reg = <0x48880000 0x10000>;
1496                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1497                         #address-cells = <1>;
1498                         #size-cells = <1>;
1499                         utmi-mode = <2>;
1500                         ranges;
1501                         usb1: usb@48890000 {
1502                                 compatible = "snps,dwc3";
1503                                 reg = <0x48890000 0x17000>;
1504                                 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1505                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1506                                              <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1507                                 interrupt-names = "peripheral",
1508                                                   "host",
1509                                                   "otg";
1510                                 phys = <&usb2_phy1>, <&usb3_phy1>;
1511                                 phy-names = "usb2-phy", "usb3-phy";
1512                                 maximum-speed = "super-speed";
1513                                 dr_mode = "otg";
1514                                 snps,dis_u3_susphy_quirk;
1515                                 snps,dis_u2_susphy_quirk;
1516                         };
1517                 };
1518
1519                 omap_dwc3_2: omap_dwc3_2@488c0000 {
1520                         compatible = "ti,dwc3";
1521                         ti,hwmods = "usb_otg_ss2";
1522                         reg = <0x488c0000 0x10000>;
1523                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1524                         #address-cells = <1>;
1525                         #size-cells = <1>;
1526                         utmi-mode = <2>;
1527                         ranges;
1528                         usb2: usb@488d0000 {
1529                                 compatible = "snps,dwc3";
1530                                 reg = <0x488d0000 0x17000>;
1531                                 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1532                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1533                                              <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1534                                 interrupt-names = "peripheral",
1535                                                   "host",
1536                                                   "otg";
1537                                 phys = <&usb2_phy2>;
1538                                 phy-names = "usb2-phy";
1539                                 maximum-speed = "high-speed";
1540                                 dr_mode = "otg";
1541                                 snps,dis_u3_susphy_quirk;
1542                                 snps,dis_u2_susphy_quirk;
1543                         };
1544                 };
1545
1546                 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
1547                 omap_dwc3_3: omap_dwc3_3@48900000 {
1548                         compatible = "ti,dwc3";
1549                         ti,hwmods = "usb_otg_ss3";
1550                         reg = <0x48900000 0x10000>;
1551                         interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1552                         #address-cells = <1>;
1553                         #size-cells = <1>;
1554                         utmi-mode = <2>;
1555                         ranges;
1556                         status = "disabled";
1557                         usb3: usb@48910000 {
1558                                 compatible = "snps,dwc3";
1559                                 reg = <0x48910000 0x17000>;
1560                                 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1561                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1562                                              <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1563                                 interrupt-names = "peripheral",
1564                                                   "host",
1565                                                   "otg";
1566                                 maximum-speed = "high-speed";
1567                                 dr_mode = "otg";
1568                                 snps,dis_u3_susphy_quirk;
1569                                 snps,dis_u2_susphy_quirk;
1570                         };
1571                 };
1572
1573                 elm: elm@48078000 {
1574                         compatible = "ti,am3352-elm";
1575                         reg = <0x48078000 0xfc0>;      /* device IO registers */
1576                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1577                         ti,hwmods = "elm";
1578                         status = "disabled";
1579                 };
1580
1581                 gpmc: gpmc@50000000 {
1582                         compatible = "ti,am3352-gpmc";
1583                         ti,hwmods = "gpmc";
1584                         reg = <0x50000000 0x37c>;      /* device IO registers */
1585                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1586                         dmas = <&edma_xbar 4 0>;
1587                         dma-names = "rxtx";
1588                         gpmc,num-cs = <8>;
1589                         gpmc,num-waitpins = <2>;
1590                         #address-cells = <2>;
1591                         #size-cells = <1>;
1592                         interrupt-controller;
1593                         #interrupt-cells = <2>;
1594                         gpio-controller;
1595                         #gpio-cells = <2>;
1596                         status = "disabled";
1597                 };
1598
1599                 atl: atl@4843c000 {
1600                         compatible = "ti,dra7-atl";
1601                         reg = <0x4843c000 0x3ff>;
1602                         ti,hwmods = "atl";
1603                         ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
1604                                              <&atl_clkin2_ck>, <&atl_clkin3_ck>;
1605                         clocks = <&atl_gfclk_mux>;
1606                         clock-names = "fck";
1607                         status = "disabled";
1608                 };
1609
1610                 mcasp1: mcasp@48460000 {
1611                         compatible = "ti,dra7-mcasp-audio";
1612                         ti,hwmods = "mcasp1";
1613                         reg = <0x48460000 0x2000>,
1614                               <0x45800000 0x1000>;
1615                         reg-names = "mpu","dat";
1616                         interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1617                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1618                         interrupt-names = "tx", "rx";
1619                         dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
1620                         dma-names = "tx", "rx";
1621                         clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
1622                                  <&mcasp1_ahclkr_mux>;
1623                         clock-names = "fck", "ahclkx", "ahclkr";
1624                         status = "disabled";
1625                 };
1626
1627                 mcasp2: mcasp@48464000 {
1628                         compatible = "ti,dra7-mcasp-audio";
1629                         ti,hwmods = "mcasp2";
1630                         reg = <0x48464000 0x2000>,
1631                               <0x45c00000 0x1000>;
1632                         reg-names = "mpu","dat";
1633                         interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1634                                      <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1635                         interrupt-names = "tx", "rx";
1636                         dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
1637                         dma-names = "tx", "rx";
1638                         clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
1639                                  <&mcasp2_ahclkr_mux>;
1640                         clock-names = "fck", "ahclkx", "ahclkr";
1641                         status = "disabled";
1642                 };
1643
1644                 mcasp3: mcasp@48468000 {
1645                         compatible = "ti,dra7-mcasp-audio";
1646                         ti,hwmods = "mcasp3";
1647                         reg = <0x48468000 0x2000>,
1648                               <0x46000000 0x1000>;
1649                         reg-names = "mpu","dat";
1650                         interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
1651                                      <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
1652                         interrupt-names = "tx", "rx";
1653                         dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
1654                         dma-names = "tx", "rx";
1655                         clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
1656                         clock-names = "fck", "ahclkx";
1657                         status = "disabled";
1658                 };
1659
1660                 mcasp4: mcasp@4846c000 {
1661                         compatible = "ti,dra7-mcasp-audio";
1662                         ti,hwmods = "mcasp4";
1663                         reg = <0x4846c000 0x2000>,
1664                               <0x48436000 0x1000>;
1665                         reg-names = "mpu","dat";
1666                         interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
1667                                      <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
1668                         interrupt-names = "tx", "rx";
1669                         dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
1670                         dma-names = "tx", "rx";
1671                         clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
1672                         clock-names = "fck", "ahclkx";
1673                         status = "disabled";
1674                 };
1675
1676                 mcasp5: mcasp@48470000 {
1677                         compatible = "ti,dra7-mcasp-audio";
1678                         ti,hwmods = "mcasp5";
1679                         reg = <0x48470000 0x2000>,
1680                               <0x4843a000 0x1000>;
1681                         reg-names = "mpu","dat";
1682                         interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
1683                                      <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
1684                         interrupt-names = "tx", "rx";
1685                         dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
1686                         dma-names = "tx", "rx";
1687                         clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
1688                         clock-names = "fck", "ahclkx";
1689                         status = "disabled";
1690                 };
1691
1692                 mcasp6: mcasp@48474000 {
1693                         compatible = "ti,dra7-mcasp-audio";
1694                         ti,hwmods = "mcasp6";
1695                         reg = <0x48474000 0x2000>,
1696                               <0x4844c000 0x1000>;
1697                         reg-names = "mpu","dat";
1698                         interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
1699                                      <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
1700                         interrupt-names = "tx", "rx";
1701                         dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
1702                         dma-names = "tx", "rx";
1703                         clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
1704                         clock-names = "fck", "ahclkx";
1705                         status = "disabled";
1706                 };
1707
1708                 mcasp7: mcasp@48478000 {
1709                         compatible = "ti,dra7-mcasp-audio";
1710                         ti,hwmods = "mcasp7";
1711                         reg = <0x48478000 0x2000>,
1712                               <0x48450000 0x1000>;
1713                         reg-names = "mpu","dat";
1714                         interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
1715                                      <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
1716                         interrupt-names = "tx", "rx";
1717                         dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
1718                         dma-names = "tx", "rx";
1719                         clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
1720                         clock-names = "fck", "ahclkx";
1721                         status = "disabled";
1722                 };
1723
1724                 mcasp8: mcasp@4847c000 {
1725                         compatible = "ti,dra7-mcasp-audio";
1726                         ti,hwmods = "mcasp8";
1727                         reg = <0x4847c000 0x2000>,
1728                               <0x48454000 0x1000>;
1729                         reg-names = "mpu","dat";
1730                         interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
1731                                      <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1732                         interrupt-names = "tx", "rx";
1733                         dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
1734                         dma-names = "tx", "rx";
1735                         clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
1736                         clock-names = "fck", "ahclkx";
1737                         status = "disabled";
1738                 };
1739
1740                 crossbar_mpu: crossbar@4a002a48 {
1741                         compatible = "ti,irq-crossbar";
1742                         reg = <0x4a002a48 0x130>;
1743                         interrupt-controller;
1744                         interrupt-parent = <&wakeupgen>;
1745                         #interrupt-cells = <3>;
1746                         ti,max-irqs = <160>;
1747                         ti,max-crossbar-sources = <MAX_SOURCES>;
1748                         ti,reg-size = <2>;
1749                         ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
1750                         ti,irqs-skip = <10 133 139 140>;
1751                         ti,irqs-safe-map = <0>;
1752                 };
1753
1754                 mac: ethernet@48484000 {
1755                         compatible = "ti,dra7-cpsw","ti,cpsw";
1756                         ti,hwmods = "gmac";
1757                         clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
1758                         clock-names = "fck", "cpts";
1759                         cpdma_channels = <8>;
1760                         ale_entries = <1024>;
1761                         bd_ram_size = <0x2000>;
1762                         mac_control = <0x20>;
1763                         slaves = <2>;
1764                         active_slave = <0>;
1765                         cpts_clock_mult = <0x784CFE14>;
1766                         cpts_clock_shift = <29>;
1767                         reg = <0x48484000 0x1000
1768                                0x48485200 0x2E00>;
1769                         #address-cells = <1>;
1770                         #size-cells = <1>;
1771
1772                         /*
1773                          * Do not allow gating of cpsw clock as workaround
1774                          * for errata i877. Keeping internal clock disabled
1775                          * causes the device switching characteristics
1776                          * to degrade over time and eventually fail to meet
1777                          * the data manual delay time/skew specs.
1778                          */
1779                         ti,no-idle;
1780
1781                         /*
1782                          * rx_thresh_pend
1783                          * rx_pend
1784                          * tx_pend
1785                          * misc_pend
1786                          */
1787                         interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1788                                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1789                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1790                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
1791                         ranges;
1792                         syscon = <&scm_conf>;
1793                         status = "disabled";
1794
1795                         davinci_mdio: mdio@48485000 {
1796                                 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
1797                                 #address-cells = <1>;
1798                                 #size-cells = <0>;
1799                                 ti,hwmods = "davinci_mdio";
1800                                 bus_freq = <1000000>;
1801                                 reg = <0x48485000 0x100>;
1802                         };
1803
1804                         cpsw_emac0: slave@48480200 {
1805                                 /* Filled in by U-Boot */
1806                                 mac-address = [ 00 00 00 00 00 00 ];
1807                         };
1808
1809                         cpsw_emac1: slave@48480300 {
1810                                 /* Filled in by U-Boot */
1811                                 mac-address = [ 00 00 00 00 00 00 ];
1812                         };
1813
1814                         phy_sel: cpsw-phy-sel@4a002554 {
1815                                 compatible = "ti,dra7xx-cpsw-phy-sel";
1816                                 reg= <0x4a002554 0x4>;
1817                                 reg-names = "gmii-sel";
1818                         };
1819                 };
1820
1821                 dcan1: can@481cc000 {
1822                         compatible = "ti,dra7-d_can";
1823                         ti,hwmods = "dcan1";
1824                         reg = <0x4ae3c000 0x2000>;
1825                         syscon-raminit = <&scm_conf 0x558 0>;
1826                         interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
1827                         clocks = <&dcan1_sys_clk_mux>;
1828                         status = "disabled";
1829                 };
1830
1831                 dcan2: can@481d0000 {
1832                         compatible = "ti,dra7-d_can";
1833                         ti,hwmods = "dcan2";
1834                         reg = <0x48480000 0x2000>;
1835                         syscon-raminit = <&scm_conf 0x558 1>;
1836                         interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
1837                         clocks = <&sys_clkin1>;
1838                         status = "disabled";
1839                 };
1840
1841                 dss: dss@58000000 {
1842                         compatible = "ti,dra7-dss";
1843                         /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
1844                         /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
1845                         status = "disabled";
1846                         ti,hwmods = "dss_core";
1847                         /* CTRL_CORE_DSS_PLL_CONTROL */
1848                         syscon-pll-ctrl = <&scm_conf 0x538>;
1849                         #address-cells = <1>;
1850                         #size-cells = <1>;
1851                         ranges;
1852
1853                         dispc@58001000 {
1854                                 compatible = "ti,dra7-dispc";
1855                                 reg = <0x58001000 0x1000>;
1856                                 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1857                                 ti,hwmods = "dss_dispc";
1858                                 clocks = <&dss_dss_clk>;
1859                                 clock-names = "fck";
1860                                 /* CTRL_CORE_SMA_SW_1 */
1861                                 syscon-pol = <&scm_conf 0x534>;
1862                         };
1863
1864                         hdmi: encoder@58060000 {
1865                                 compatible = "ti,dra7-hdmi";
1866                                 reg = <0x58040000 0x200>,
1867                                       <0x58040200 0x80>,
1868                                       <0x58040300 0x80>,
1869                                       <0x58060000 0x19000>;
1870                                 reg-names = "wp", "pll", "phy", "core";
1871                                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1872                                 status = "disabled";
1873                                 ti,hwmods = "dss_hdmi";
1874                                 clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
1875                                 clock-names = "fck", "sys_clk";
1876                         };
1877                 };
1878
1879                 epwmss0: epwmss@4843e000 {
1880                         compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1881                         reg = <0x4843e000 0x30>;
1882                         ti,hwmods = "epwmss0";
1883                         #address-cells = <1>;
1884                         #size-cells = <1>;
1885                         status = "disabled";
1886                         ranges;
1887
1888                         ehrpwm0: pwm@4843e200 {
1889                                 compatible = "ti,dra746-ehrpwm",
1890                                              "ti,am3352-ehrpwm";
1891                                 #pwm-cells = <3>;
1892                                 reg = <0x4843e200 0x80>;
1893                                 clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
1894                                 clock-names = "tbclk", "fck";
1895                                 status = "disabled";
1896                         };
1897
1898                         ecap0: ecap@4843e100 {
1899                                 compatible = "ti,dra746-ecap",
1900                                              "ti,am3352-ecap";
1901                                 #pwm-cells = <3>;
1902                                 reg = <0x4843e100 0x80>;
1903                                 clocks = <&l4_root_clk_div>;
1904                                 clock-names = "fck";
1905                                 status = "disabled";
1906                         };
1907                 };
1908
1909                 epwmss1: epwmss@48440000 {
1910                         compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1911                         reg = <0x48440000 0x30>;
1912                         ti,hwmods = "epwmss1";
1913                         #address-cells = <1>;
1914                         #size-cells = <1>;
1915                         status = "disabled";
1916                         ranges;
1917
1918                         ehrpwm1: pwm@48440200 {
1919                                 compatible = "ti,dra746-ehrpwm",
1920                                              "ti,am3352-ehrpwm";
1921                                 #pwm-cells = <3>;
1922                                 reg = <0x48440200 0x80>;
1923                                 clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
1924                                 clock-names = "tbclk", "fck";
1925                                 status = "disabled";
1926                         };
1927
1928                         ecap1: ecap@48440100 {
1929                                 compatible = "ti,dra746-ecap",
1930                                              "ti,am3352-ecap";
1931                                 #pwm-cells = <3>;
1932                                 reg = <0x48440100 0x80>;
1933                                 clocks = <&l4_root_clk_div>;
1934                                 clock-names = "fck";
1935                                 status = "disabled";
1936                         };
1937                 };
1938
1939                 epwmss2: epwmss@48442000 {
1940                         compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1941                         reg = <0x48442000 0x30>;
1942                         ti,hwmods = "epwmss2";
1943                         #address-cells = <1>;
1944                         #size-cells = <1>;
1945                         status = "disabled";
1946                         ranges;
1947
1948                         ehrpwm2: pwm@48442200 {
1949                                 compatible = "ti,dra746-ehrpwm",
1950                                              "ti,am3352-ehrpwm";
1951                                 #pwm-cells = <3>;
1952                                 reg = <0x48442200 0x80>;
1953                                 clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
1954                                 clock-names = "tbclk", "fck";
1955                                 status = "disabled";
1956                         };
1957
1958                         ecap2: ecap@48442100 {
1959                                 compatible = "ti,dra746-ecap",
1960                                              "ti,am3352-ecap";
1961                                 #pwm-cells = <3>;
1962                                 reg = <0x48442100 0x80>;
1963                                 clocks = <&l4_root_clk_div>;
1964                                 clock-names = "fck";
1965                                 status = "disabled";
1966                         };
1967                 };
1968
1969                 aes1: aes@4b500000 {
1970                         compatible = "ti,omap4-aes";
1971                         ti,hwmods = "aes1";
1972                         reg = <0x4b500000 0xa0>;
1973                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1974                         dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
1975                         dma-names = "tx", "rx";
1976                         clocks = <&l3_iclk_div>;
1977                         clock-names = "fck";
1978                 };
1979
1980                 aes2: aes@4b700000 {
1981                         compatible = "ti,omap4-aes";
1982                         ti,hwmods = "aes2";
1983                         reg = <0x4b700000 0xa0>;
1984                         interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
1985                         dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
1986                         dma-names = "tx", "rx";
1987                         clocks = <&l3_iclk_div>;
1988                         clock-names = "fck";
1989                 };
1990
1991                 des: des@480a5000 {
1992                         compatible = "ti,omap4-des";
1993                         ti,hwmods = "des";
1994                         reg = <0x480a5000 0xa0>;
1995                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
1996                         dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
1997                         dma-names = "tx", "rx";
1998                         clocks = <&l3_iclk_div>;
1999                         clock-names = "fck";
2000                 };
2001
2002                 sham: sham@53100000 {
2003                         compatible = "ti,omap5-sham";
2004                         ti,hwmods = "sham";
2005                         reg = <0x4b101000 0x300>;
2006                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
2007                         dmas = <&edma_xbar 119 0>;
2008                         dma-names = "rx";
2009                         clocks = <&l3_iclk_div>;
2010                         clock-names = "fck";
2011                 };
2012
2013                 rng: rng@48090000 {
2014                         compatible = "ti,omap4-rng";
2015                         ti,hwmods = "rng";
2016                         reg = <0x48090000 0x2000>;
2017                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
2018                         clocks = <&l3_iclk_div>;
2019                         clock-names = "fck";
2020                 };
2021         };
2022
2023         thermal_zones: thermal-zones {
2024                 #include "omap4-cpu-thermal.dtsi"
2025                 #include "omap5-gpu-thermal.dtsi"
2026                 #include "omap5-core-thermal.dtsi"
2027                 #include "dra7-dspeve-thermal.dtsi"
2028                 #include "dra7-iva-thermal.dtsi"
2029         };
2030
2031 };
2032
2033 &cpu_thermal {
2034         polling-delay = <500>; /* milliseconds */
2035         coefficients = <0 2000>;
2036 };
2037
2038 &gpu_thermal {
2039         coefficients = <0 2000>;
2040 };
2041
2042 &core_thermal {
2043         coefficients = <0 2000>;
2044 };
2045
2046 &dspeve_thermal {
2047         coefficients = <0 2000>;
2048 };
2049
2050 &iva_thermal {
2051         coefficients = <0 2000>;
2052 };
2053
2054 &cpu_crit {
2055         temperature = <120000>; /* milli Celsius */
2056 };
2057
2058 /include/ "dra7xx-clocks.dtsi"