Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / berlin2q-marvell-dmp.dts
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3  * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
4  */
5
6 /dts-v1/;
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include "berlin2q.dtsi"
10
11 / {
12         model = "Marvell BG2-Q DMP";
13         compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
14
15         memory@0 {
16                 device_type = "memory";
17                 reg = <0x00000000 0x80000000>;
18         };
19
20         chosen {
21                 bootargs = "earlyprintk";
22                 stdout-path = "serial0:115200n8";
23         };
24
25         regulators {
26                 compatible = "simple-bus";
27                 #address-cells = <1>;
28                 #size-cells = <0>;
29
30                 reg_usb0_vbus: regulator_usb0 {
31                         compatible = "regulator-fixed";
32                         regulator-name = "usb0_vbus";
33                         regulator-min-microvolt = <5000000>;
34                         regulator-max-microvolt = <5000000>;
35                         gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
36                         enable-active-high;
37                 };
38
39                 reg_usb1_vbus: regulator_usb1 {
40                         compatible = "regulator-fixed";
41                         regulator-name = "usb1_vbus";
42                         regulator-min-microvolt = <5000000>;
43                         regulator-max-microvolt = <5000000>;
44                         gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
45                         enable-active-high;
46                 };
47
48                 reg_usb2_vbus: regulator_usb2 {
49                         compatible = "regulator-fixed";
50                         regulator-name = "usb2_vbus";
51                         regulator-min-microvolt = <5000000>;
52                         regulator-max-microvolt = <5000000>;
53                         gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
54                         enable-active-high;
55                 };
56
57                 reg_sdio1_vmmc: regulator_sdio1_vmmc {
58                         compatible = "regulator-fixed";
59                         regulator-min-microvolt = <3300000>;
60                         regulator-max-microvolt = <3300000>;
61                         regulator-name = "sdio1_vmmc";
62                         enable-active-high;
63                         regulator-boot-on;
64                         gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
65                 };
66
67                 reg_sdio1_vqmmc: regulator_sido1_vqmmc {
68                         compatible = "regulator-gpio";
69                         regulator-min-microvolt = <1800000>;
70                         regulator-max-microvolt = <3300000>;
71                         regulator-name = "sdio1_vqmmc";
72                         regulator-type = "voltage";
73                         enable-active-high;
74                         gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
75                         states = <3300000 0x1
76                                   1800000 0x0>;
77                 };
78         };
79 };
80
81 &soc_pinctrl {
82         sd1gpio_pmux: sd1pwr-pmux {
83                 groups = "G23", "G32";
84                 function = "gpio";
85         };
86 };
87
88 &sdhci1 {
89         vmmc-supply = <&reg_sdio1_vmmc>;
90         vqmmc-supply = <&reg_sdio1_vqmmc>;
91         cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
92         wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
93         pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
94         pinctrl-names = "default";
95         status = "okay";
96 };
97
98 &sdhci2 {
99         bus-width = <8>;
100         non-removable;
101         status = "okay";
102 };
103
104 &i2c0 {
105         status = "okay";
106 };
107
108 &i2c2 {
109         status = "okay";
110 };
111
112 &uart0 {
113         status = "okay";
114 };
115
116 &usb_phy0 {
117         status = "okay";
118 };
119
120 &usb_phy2 {
121         status = "okay";
122 };
123
124 &usb0 {
125         vbus-supply = <&reg_usb0_vbus>;
126         status = "okay";
127 };
128
129 &usb2 {
130         vbus-supply = <&reg_usb2_vbus>;
131         status = "okay";
132 };
133
134 &eth0 {
135         status = "okay";
136 };
137
138 &sata0 {
139         status = "okay";
140 };
141
142 &sata_phy {
143         status = "okay";
144 };