arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Broadcom BCM470X / BCM5301X ARM platform code.
   4  * DTS for D-Link DIR-885L
   5  *
   6  * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
   7  */
   8
   9 /dts-v1/;
  10
  11 #include "bcm47094.dtsi"
  12 #include "bcm5301x-nand-cs0-bch1.dtsi"
  13
  14 / {
  15         compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
  16         model = "D-Link DIR-885L";
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200 earlycon";
  20         };
  21
  22         memory {
  23                 reg = <0x00000000 0x08000000
  24                        0x88000000 0x08000000>;
  25         };
  26
  27         nand: nand@18028000 {
  28                 nandcs@0 {
  29                         partitions {
  30                                 compatible = "fixed-partitions";
  31                                 #address-cells = <1>;
  32                                 #size-cells = <1>;
  33
  34                                 partition@0 {
  35                                         label = "firmware";
  36                                         reg = <0x00000000 0x08000000>;
  37                                 };
  38                         };
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 power-white {
  46                         label = "bcm53xx:white:power";
  47                         gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  48                         linux,default-trigger = "default-on";
  49                 };
  50
  51                 wan-white {
  52                         label = "bcm53xx:white:wan";
  53                         gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 power-amber {
  57                         label = "bcm53xx:amber:power";
  58                         gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 wan-amber {
  62                         label = "bcm53xx:amber:wan";
  63                         gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 usb3-white {
  67                         label = "bcm53xx:white:usb3";
  68                         gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  69                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
  70                                           <&xhci_port1>;
  71                         linux,default-trigger = "usbport";
  72                 };
  73
  74                 2ghz {
  75                         label = "bcm53xx:white:2ghz";
  76                         gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 5ghz {
  80                         label = "bcm53xx:white:5ghz";
  81                         gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84
  85         gpio-keys {
  86                 compatible = "gpio-keys";
  87                 #address-cells = <1>;
  88                 #size-cells = <0>;
  89
  90                 wps {
  91                         label = "WPS";
  92                         linux,code = <KEY_WPS_BUTTON>;
  93                         gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 /* Switch: router / extender */
  97                 extender {
  98                         label = "Extender";
  99                         linux,code = <BTN_0>;
 100                         gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 101                 };
 102
 103                 restart {
 104                         label = "Reset";
 105                         linux,code = <KEY_RESTART>;
 106                         gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 107                 };
 108         };
 109 };
 110
 111 &usb3 {
 112         vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 113 };
 114
 115 &spi_nor {
 116         status = "okay";
 117 };
 118
 119 &usb3_phy {
 120         status = "okay";
 121 };