arch/arm/boot/dts/bcm-nsp.dtsi

   1 /*
   2  *  BSD LICENSE
   3  *
   4  *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
   5  *
   6  *  Redistribution and use in source and binary forms, with or without
   7  *  modification, are permitted provided that the following conditions
   8  *  are met:
   9  *
  10  *    * Redistributions of source code must retain the above copyright
  11  *      notice, this list of conditions and the following disclaimer.
  12  *    * Redistributions in binary form must reproduce the above copyright
  13  *      notice, this list of conditions and the following disclaimer in
  14  *      the documentation and/or other materials provided with the
  15  *      distribution.
  16  *    * Neither the name of Broadcom Corporation nor the names of its
  17  *      contributors may be used to endorse or promote products derived
  18  *      from this software without specific prior written permission.
  19  *
  20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 #include <dt-bindings/interrupt-controller/arm-gic.h>
  34 #include <dt-bindings/interrupt-controller/irq.h>
  35 #include <dt-bindings/clock/bcm-nsp.h>
  36
  37 #include "skeleton.dtsi"
  38
  39 / {
  40         compatible = "brcm,nsp";
  41         model = "Broadcom Northstar Plus SoC";
  42         interrupt-parent = <&gic>;
  43
  44         aliases {
  45                 serial0 = &uart0;
  46                 serial1 = &uart1;
  47                 ethernet0 = &amac0;
  48                 ethernet1 = &amac1;
  49                 ethernet2 = &amac2;
  50         };
  51
  52         cpus {
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55
  56                 cpu0: cpu@0 {
  57                         device_type = "cpu";
  58                         compatible = "arm,cortex-a9";
  59                         next-level-cache = <&L2>;
  60                         reg = <0x0>;
  61                 };
  62
  63                 cpu1: cpu@1 {
  64                         device_type = "cpu";
  65                         compatible = "arm,cortex-a9";
  66                         next-level-cache = <&L2>;
  67                         enable-method = "brcm,bcm-nsp-smp";
  68                         secondary-boot-reg = <0xffff0fec>;
  69                         reg = <0x1>;
  70                 };
  71         };
  72
  73         pmu {
  74                 compatible = "arm,cortex-a9-pmu";
  75                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
  76                               GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
  77                 interrupt-affinity = <&cpu0>, <&cpu1>;
  78         };
  79
  80         mpcore {
  81                 compatible = "simple-bus";
  82                 ranges = <0x00000000 0x19000000 0x00023000>;
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85
  86                 a9pll: arm_clk@0 {
  87                         #clock-cells = <0>;
  88                         compatible = "brcm,nsp-armpll";
  89                         clocks = <&osc>;
  90                         reg = <0x00000 0x1000>;
  91                 };
  92
  93                 timer@20200 {
  94                         compatible = "arm,cortex-a9-global-timer";
  95                         reg = <0x20200 0x100>;
  96                         interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
  97                         clocks = <&periph_clk>;
  98                 };
  99
 100                 twd-timer@20600 {
 101                         compatible = "arm,cortex-a9-twd-timer";
 102                         reg = <0x20600 0x20>;
 103                         interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
 104                                                   IRQ_TYPE_EDGE_RISING)>;
 105                         clocks = <&periph_clk>;
 106                 };
 107
 108                 twd-watchdog@20620 {
 109                         compatible = "arm,cortex-a9-twd-wdt";
 110                         reg = <0x20620 0x20>;
 111                         interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
 112                                                   IRQ_TYPE_LEVEL_HIGH)>;
 113                         clocks = <&periph_clk>;
 114                 };
 115
 116                 gic: interrupt-controller@21000 {
 117                         compatible = "arm,cortex-a9-gic";
 118                         #interrupt-cells = <3>;
 119                         #address-cells = <0>;
 120                         interrupt-controller;
 121                         reg = <0x21000 0x1000>,
 122                               <0x20100 0x100>;
 123                 };
 124
 125                 L2: l2-cache {
 126                         compatible = "arm,pl310-cache";
 127                         reg = <0x22000 0x1000>;
 128                         cache-unified;
 129                         cache-level = <2>;
 130                 };
 131         };
 132
 133         clocks {
 134                 #address-cells = <1>;
 135                 #size-cells = <1>;
 136                 ranges;
 137
 138                 osc: oscillator {
 139                         #clock-cells = <0>;
 140                         compatible = "fixed-clock";
 141                         clock-frequency = <25000000>;
 142                 };
 143
 144                 iprocmed: iprocmed {
 145                         #clock-cells = <0>;
 146                         compatible = "fixed-factor-clock";
 147                         clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
 148                         clock-div = <2>;
 149                         clock-mult = <1>;
 150                 };
 151
 152                 iprocslow: iprocslow {
 153                         #clock-cells = <0>;
 154                         compatible = "fixed-factor-clock";
 155                         clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
 156                         clock-div = <4>;
 157                         clock-mult = <1>;
 158                 };
 159
 160                 periph_clk: periph_clk {
 161                         #clock-cells = <0>;
 162                         compatible = "fixed-factor-clock";
 163                         clocks = <&a9pll>;
 164                         clock-div = <2>;
 165                         clock-mult = <1>;
 166                 };
 167         };
 168
 169         axi {
 170                 compatible = "simple-bus";
 171                 ranges = <0x00000000 0x18000000 0x0011c40c>;
 172                 #address-cells = <1>;
 173                 #size-cells = <1>;
 174
 175                 gpioa: gpio@20 {
 176                         compatible = "brcm,nsp-gpio-a";
 177                         reg = <0x0020 0x70>,
 178                               <0x3f1c4 0x1c>;
 179                         #gpio-cells = <2>;
 180                         gpio-controller;
 181                         ngpios = <32>;
 182                         interrupt-controller;
 183                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 184                         gpio-ranges = <&pinctrl 0 0 32>;
 185                 };
 186
 187                 uart0: serial@300 {
 188                         compatible = "ns16550a";
 189                         reg = <0x0300 0x100>;
 190                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 191                         clocks = <&osc>;
 192                         status = "disabled";
 193                 };
 194
 195                 uart1: serial@400 {
 196                         compatible = "ns16550a";
 197                         reg = <0x0400 0x100>;
 198                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 199                         clocks = <&osc>;
 200                         status = "disabled";
 201                 };
 202
 203                 dma@20000 {
 204                         compatible = "arm,pl330", "arm,primecell";
 205                         reg = <0x20000 0x1000>;
 206                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
 207                                      <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
 208                                      <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 209                                      <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
 210                                      <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
 211                                      <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 212                                      <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 213                                      <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 214                                      <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 215                         clocks = <&iprocslow>;
 216                         clock-names = "apb_pclk";
 217                         #dma-cells = <1>;
 218                 };
 219
 220                 sdio: sdhci@21000 {
 221                         compatible = "brcm,sdhci-iproc-cygnus";
 222                         reg = <0x21000 0x100>;
 223                         interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 224                         sdhci,auto-cmd12;
 225                         clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
 226                         dma-coherent;
 227                         status = "disabled";
 228                 };
 229
 230                 amac0: ethernet@22000 {
 231                         compatible = "brcm,nsp-amac";
 232                         reg = <0x022000 0x1000>,
 233                               <0x110000 0x1000>;
 234                         reg-names = "amac_base", "idm_base";
 235                         interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 236                         dma-coherent;
 237                         status = "disabled";
 238                 };
 239
 240                 amac1: ethernet@23000 {
 241                         compatible = "brcm,nsp-amac";
 242                         reg = <0x023000 0x1000>,
 243                               <0x111000 0x1000>;
 244                         reg-names = "amac_base", "idm_base";
 245                         interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 246                         dma-coherent;
 247                         status = "disabled";
 248                 };
 249
 250                 amac2: ethernet@24000 {
 251                         compatible = "brcm,nsp-amac";
 252                         reg = <0x024000 0x1000>,
 253                               <0x112000 0x1000>;
 254                         reg-names = "amac_base", "idm_base";
 255                         interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 256                         dma-coherent;
 257                         status = "disabled";
 258                 };
 259
 260                 mailbox: mailbox@25000 {
 261                         compatible = "brcm,iproc-fa2-mbox";
 262                         reg = <0x25000 0x445>;
 263                         interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 264                         #mbox-cells = <1>;
 265                         brcm,rx-status-len = <32>;
 266                         brcm,use-bcm-hdr;
 267                         dma-coherent;
 268                 };
 269
 270                 nand: nand@26000 {
 271                         compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 272                         reg = <0x026000 0x600>,
 273                               <0x11b408 0x600>,
 274                               <0x026f00 0x20>;
 275                         reg-names = "nand", "iproc-idm", "iproc-ext";
 276                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 277
 278                         #address-cells = <1>;
 279                         #size-cells = <0>;
 280
 281                         brcm,nand-has-wp;
 282                 };
 283
 284                 qspi: spi@27200 {
 285                         compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 286                         reg = <0x027200 0x184>,
 287                               <0x027000 0x124>,
 288                               <0x11c408 0x004>,
 289                               <0x0273a0 0x01c>;
 290                         reg-names = "mspi", "bspi", "intr_regs",
 291                                     "intr_status_reg";
 292                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 293                                      <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 294                                      <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 295                                      <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
 296                                      <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 297                                      <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 298                                      <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 299                         interrupt-names = "spi_lr_fullness_reached",
 300                                           "spi_lr_session_aborted",
 301                                           "spi_lr_impatient",
 302                                           "spi_lr_session_done",
 303                                           "spi_lr_overhead",
 304                                           "mspi_done",
 305                                           "mspi_halted";
 306                         clocks = <&iprocmed>;
 307                         clock-names = "iprocmed";
 308                         num-cs = <2>;
 309                         #address-cells = <1>;
 310                         #size-cells = <0>;
 311                 };
 312
 313                 xhci: usb@29000 {
 314                         compatible = "generic-xhci";
 315                         reg = <0x29000 0x1000>;
 316                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 317                         phys = <&usb3_phy>;
 318                         phy-names = "usb3-phy";
 319                         dma-coherent;
 320                         status = "disabled";
 321                 };
 322
 323                 ehci0: usb@2a000 {
 324                         compatible = "generic-ehci";
 325                         reg = <0x2a000 0x100>;
 326                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 327                         dma-coherent;
 328                         status = "disabled";
 329                 };
 330
 331                 ohci0: usb@2b000 {
 332                         compatible = "generic-ohci";
 333                         reg = <0x2b000 0x100>;
 334                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 335                         dma-coherent;
 336                         status = "disabled";
 337                 };
 338
 339                 crypto@2f000 {
 340                         compatible = "brcm,spum-nsp-crypto";
 341                         reg = <0x2f000 0x900>;
 342                         mboxes = <&mailbox 0>;
 343                 };
 344
 345                 gpiob: gpio@30000 {
 346                         compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
 347                         reg = <0x30000 0x50>;
 348                         #gpio-cells = <2>;
 349                         gpio-controller;
 350                         ngpios = <4>;
 351                         interrupt-controller;
 352                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 353                 };
 354
 355                 pwm: pwm@31000 {
 356                         compatible = "brcm,iproc-pwm";
 357                         reg = <0x31000 0x28>;
 358                         clocks = <&osc>;
 359                         #pwm-cells = <3>;
 360                         status = "disabled";
 361                 };
 362
 363                 rng: rng@33000 {
 364                         compatible = "brcm,bcm-nsp-rng";
 365                         reg = <0x33000 0x14>;
 366                 };
 367
 368                 ccbtimer0: timer@34000 {
 369                         compatible = "arm,sp804";
 370                         reg = <0x34000 0x1000>;
 371                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 372                                      <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 373                         clocks = <&iprocslow>;
 374                         clock-names = "apb_pclk";
 375                 };
 376
 377                 ccbtimer1: timer@35000 {
 378                         compatible = "arm,sp804";
 379                         reg = <0x35000 0x1000>;
 380                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 381                                      <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 382                         clocks = <&iprocslow>;
 383                         clock-names = "apb_pclk";
 384                 };
 385
 386                 srab: srab@36000 {
 387                         compatible = "brcm,nsp-srab";
 388                         reg = <0x36000 0x1000>,
 389                               <0x3f308 0x8>,
 390                               <0x3f410 0xc>;
 391                         reg-names = "srab", "mux_config", "sgmii";
 392                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
 393                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
 394                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
 395                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
 396                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
 397                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 398                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 399                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
 400                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
 401                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 402                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 403                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
 404                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 405                         interrupt-names = "link_state_p0",
 406                                           "link_state_p1",
 407                                           "link_state_p2",
 408                                           "link_state_p3",
 409                                           "link_state_p4",
 410                                           "link_state_p5",
 411                                           "link_state_p7",
 412                                           "link_state_p8",
 413                                           "phy",
 414                                           "ts",
 415                                           "imp_sleep_timer_p5",
 416                                           "imp_sleep_timer_p7",
 417                                           "imp_sleep_timer_p8";
 418                         #address-cells = <1>;
 419                         #size-cells = <0>;
 420
 421                         status = "disabled";
 422
 423                         /* ports are defined in board DTS */
 424                 };
 425
 426                 i2c0: i2c@38000 {
 427                         compatible = "brcm,iproc-i2c";
 428                         reg = <0x38000 0x50>;
 429                         #address-cells = <1>;
 430                         #size-cells = <0>;
 431                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 432                         clock-frequency = <100000>;
 433                         dma-coherent;
 434                         status = "disabled";
 435                 };
 436
 437                 watchdog@39000 {
 438                         compatible = "arm,sp805", "arm,primecell";
 439                         reg = <0x39000 0x1000>;
 440                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 441                         clocks = <&iprocslow>, <&iprocslow>;
 442                         clock-names = "wdogclk", "apb_pclk";
 443                 };
 444
 445                 lcpll0: lcpll0@3f100 {
 446                         #clock-cells = <1>;
 447                         compatible = "brcm,nsp-lcpll0";
 448                         reg = <0x3f100 0x14>;
 449                         clocks = <&osc>;
 450                         clock-output-names = "lcpll0", "pcie_phy", "sdio",
 451                                              "ddr_phy";
 452                 };
 453
 454                 genpll: genpll@3f140 {
 455                         #clock-cells = <1>;
 456                         compatible = "brcm,nsp-genpll";
 457                         reg = <0x3f140 0x24>;
 458                         clocks = <&osc>;
 459                         clock-output-names = "genpll", "phy", "ethernetclk",
 460                                              "usbclk", "iprocfast", "sata1",
 461                                              "sata2";
 462                 };
 463
 464                 pinctrl: pinctrl@3f1c0 {
 465                         compatible = "brcm,nsp-pinmux";
 466                         reg = <0x3f1c0 0x04>,
 467                               <0x30028 0x04>,
 468                               <0x3f408 0x04>;
 469                 };
 470
 471                 thermal: thermal@3f2c0 {
 472                         compatible = "brcm,ns-thermal";
 473                         reg = <0x3f2c0 0x10>;
 474                         #thermal-sensor-cells = <0>;
 475                 };
 476
 477                 sata_phy: sata_phy@40100 {
 478                         compatible = "brcm,iproc-nsp-sata-phy";
 479                         reg = <0x40100 0x340>;
 480                         reg-names = "phy";
 481                         #address-cells = <1>;
 482                         #size-cells = <0>;
 483
 484                         sata_phy0: sata-phy@0 {
 485                                 reg = <0>;
 486                                 #phy-cells = <0>;
 487                                 status = "disabled";
 488                         };
 489
 490                         sata_phy1: sata-phy@1 {
 491                                 reg = <1>;
 492                                 #phy-cells = <0>;
 493                                 status = "disabled";
 494                         };
 495                 };
 496
 497                 sata: ahci@41000 {
 498                         compatible = "brcm,bcm-nsp-ahci";
 499                         reg-names = "ahci", "top-ctrl";
 500                         reg = <0x41000 0x1000>, <0x40020 0x1c>;
 501                         interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 502                         #address-cells = <1>;
 503                         #size-cells = <0>;
 504                         dma-coherent;
 505                         status = "disabled";
 506
 507                         sata0: sata-port@0 {
 508                                 reg = <0>;
 509                                 phys = <&sata_phy0>;
 510                                 phy-names = "sata-phy";
 511                         };
 512
 513                         sata1: sata-port@1 {
 514                                 reg = <1>;
 515                                 phys = <&sata_phy1>;
 516                                 phy-names = "sata-phy";
 517                         };
 518                 };
 519
 520                 usb3_phy: usb3-phy@104000 {
 521                         compatible = "brcm,ns-bx-usb3-phy";
 522                         reg = <0x104000 0x1000>,
 523                               <0x032000 0x1000>;
 524                         reg-names = "dmp", "ccb-mii";
 525                         #phy-cells = <0>;
 526                         status = "disabled";
 527                 };
 528         };
 529
 530         pcie0: pcie@18012000 {
 531                 compatible = "brcm,iproc-pcie";
 532                 reg = <0x18012000 0x1000>;
 533
 534                 #interrupt-cells = <1>;
 535                 interrupt-map-mask = <0 0 0 0>;
 536                 interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 537
 538                 linux,pci-domain = <0>;
 539
 540                 bus-range = <0x00 0xff>;
 541
 542                 #address-cells = <3>;
 543                 #size-cells = <2>;
 544                 device_type = "pci";
 545
 546                 /* Note: The HW does not support I/O resources.  So,
 547                  * only the memory resource range is being specified.
 548                  */
 549                 ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
 550
 551                 dma-coherent;
 552                 status = "disabled";
 553
 554                 msi-parent = <&msi0>;
 555                 msi0: msi-controller {
 556                         compatible = "brcm,iproc-msi";
 557                         msi-controller;
 558                         interrupt-parent = <&gic>;
 559                         interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
 560                                      <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 561                                      <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
 562                                      <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 563                         brcm,pcie-msi-inten;
 564                 };
 565         };
 566
 567         pcie1: pcie@18013000 {
 568                 compatible = "brcm,iproc-pcie";
 569                 reg = <0x18013000 0x1000>;
 570
 571                 #interrupt-cells = <1>;
 572                 interrupt-map-mask = <0 0 0 0>;
 573                 interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 574
 575                 linux,pci-domain = <1>;
 576
 577                 bus-range = <0x00 0xff>;
 578
 579                 #address-cells = <3>;
 580                 #size-cells = <2>;
 581                 device_type = "pci";
 582
 583                 /* Note: The HW does not support I/O resources.  So,
 584                  * only the memory resource range is being specified.
 585                  */
 586                 ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
 587
 588                 dma-coherent;
 589                 status = "disabled";
 590
 591                 msi-parent = <&msi1>;
 592                 msi1: msi-controller {
 593                         compatible = "brcm,iproc-msi";
 594                         msi-controller;
 595                         interrupt-parent = <&gic>;
 596                         interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 597                                      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 598                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 599                                      <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 600                         brcm,pcie-msi-inten;
 601                 };
 602         };
 603
 604         pcie2: pcie@18014000 {
 605                 compatible = "brcm,iproc-pcie";
 606                 reg = <0x18014000 0x1000>;
 607
 608                 #interrupt-cells = <1>;
 609                 interrupt-map-mask = <0 0 0 0>;
 610                 interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 611
 612                 linux,pci-domain = <2>;
 613
 614                 bus-range = <0x00 0xff>;
 615
 616                 #address-cells = <3>;
 617                 #size-cells = <2>;
 618                 device_type = "pci";
 619
 620                 /* Note: The HW does not support I/O resources.  So,
 621                  * only the memory resource range is being specified.
 622                  */
 623                 ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
 624
 625                 dma-coherent;
 626                 status = "disabled";
 627
 628                 msi-parent = <&msi2>;
 629                 msi2: msi-controller {
 630                         compatible = "brcm,iproc-msi";
 631                         msi-controller;
 632                         interrupt-parent = <&gic>;
 633                         interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
 634                                      <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 635                                      <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 636                                      <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 637                         brcm,pcie-msi-inten;
 638                 };
 639         };
 640
 641         thermal-zones {
 642                 cpu-thermal {
 643                         polling-delay-passive = <0>;
 644                         polling-delay = <1000>;
 645                         coefficients = <(-556) 418000>;
 646                         thermal-sensors = <&thermal>;
 647
 648                         trips {
 649                                 cpu-crit {
 650                                         temperature     = <125000>;
 651                                         hysteresis      = <0>;
 652                                         type            = "critical";
 653                                 };
 654                         };
 655
 656                         cooling-maps {
 657                         };
 658                 };
 659         };
 660 };