arch/arm/boot/dts/at91sam9x5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
   4  *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
   5  *                   AT91SAM9X25, AT91SAM9X35 SoC
   6  *
   7  *  Copyright (C) 2012 Atmel,
   8  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   9  */
  10
  11 #include <dt-bindings/dma/at91.h>
  12 #include <dt-bindings/pinctrl/at91.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/clock/at91.h>
  16
  17 / {
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20         model = "Atmel AT91SAM9x5 family SoC";
  21         compatible = "atmel,at91sam9x5";
  22         interrupt-parent = <&aic>;
  23
  24         aliases {
  25                 serial0 = &dbgu;
  26                 serial1 = &usart0;
  27                 serial2 = &usart1;
  28                 serial3 = &usart2;
  29                 gpio0 = &pioA;
  30                 gpio1 = &pioB;
  31                 gpio2 = &pioC;
  32                 gpio3 = &pioD;
  33                 tcb0 = &tcb0;
  34                 tcb1 = &tcb1;
  35                 i2c0 = &i2c0;
  36                 i2c1 = &i2c1;
  37                 i2c2 = &i2c2;
  38                 ssc0 = &ssc0;
  39                 pwm0 = &pwm0;
  40         };
  41         cpus {
  42                 #address-cells = <0>;
  43                 #size-cells = <0>;
  44
  45                 cpu {
  46                         compatible = "arm,arm926ej-s";
  47                         device_type = "cpu";
  48                 };
  49         };
  50
  51         memory {
  52                 device_type = "memory";
  53                 reg = <0x20000000 0x10000000>;
  54         };
  55
  56         clocks {
  57                 slow_xtal: slow_xtal {
  58                         compatible = "fixed-clock";
  59                         #clock-cells = <0>;
  60                         clock-frequency = <0>;
  61                 };
  62
  63                 main_xtal: main_xtal {
  64                         compatible = "fixed-clock";
  65                         #clock-cells = <0>;
  66                         clock-frequency = <0>;
  67                 };
  68
  69                 adc_op_clk: adc_op_clk{
  70                         compatible = "fixed-clock";
  71                         #clock-cells = <0>;
  72                         clock-frequency = <1000000>;
  73                 };
  74         };
  75
  76         sram: sram@300000 {
  77                 compatible = "mmio-sram";
  78                 reg = <0x00300000 0x8000>;
  79         };
  80
  81         ahb {
  82                 compatible = "simple-bus";
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85                 ranges;
  86
  87                 apb {
  88                         compatible = "simple-bus";
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91                         ranges;
  92
  93                         aic: interrupt-controller@fffff000 {
  94                                 #interrupt-cells = <3>;
  95                                 compatible = "atmel,at91rm9200-aic";
  96                                 interrupt-controller;
  97                                 reg = <0xfffff000 0x200>;
  98                                 atmel,external-irqs = <31>;
  99                         };
 100
 101                         matrix: matrix@ffffde00 {
 102                                 compatible = "atmel,at91sam9x5-matrix", "syscon";
 103                                 reg = <0xffffde00 0x100>;
 104                         };
 105
 106                         pmecc: ecc-engine@ffffe000 {
 107                                 compatible = "atmel,at91sam9g45-pmecc";
 108                                 reg = <0xffffe000 0x600>,
 109                                       <0xffffe600 0x200>;
 110                         };
 111
 112                         ramc0: ramc@ffffe800 {
 113                                 compatible = "atmel,at91sam9g45-ddramc";
 114                                 reg = <0xffffe800 0x200>;
 115                                 clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 116                                 clock-names = "ddrck";
 117                         };
 118
 119                         smc: smc@ffffea00 {
 120                                 compatible = "atmel,at91sam9260-smc", "syscon";
 121                                 reg = <0xffffea00 0x200>;
 122                         };
 123
 124                         pmc: pmc@fffffc00 {
 125                                 compatible = "atmel,at91sam9x5-pmc", "syscon";
 126                                 reg = <0xfffffc00 0x200>;
 127                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 128                                 #clock-cells = <2>;
 129                                 clocks = <&clk32k>, <&main_xtal>;
 130                                 clock-names = "slow_clk", "main_xtal";
 131                         };
 132
 133                         reset_controller: rstc@fffffe00 {
 134                                 compatible = "atmel,at91sam9g45-rstc";
 135                                 reg = <0xfffffe00 0x10>;
 136                                 clocks = <&clk32k>;
 137                         };
 138
 139                         shutdown_controller: shdwc@fffffe10 {
 140                                 compatible = "atmel,at91sam9x5-shdwc";
 141                                 reg = <0xfffffe10 0x10>;
 142                                 clocks = <&clk32k>;
 143                         };
 144
 145                         pit: timer@fffffe30 {
 146                                 compatible = "atmel,at91sam9260-pit";
 147                                 reg = <0xfffffe30 0xf>;
 148                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 149                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 150                         };
 151
 152                         clk32k: sckc@fffffe50 {
 153                                 compatible = "atmel,at91sam9x5-sckc";
 154                                 reg = <0xfffffe50 0x4>;
 155                                 clocks = <&slow_xtal>;
 156                                 #clock-cells = <0>;
 157                         };
 158
 159                         tcb0: timer@f8008000 {
 160                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 reg = <0xf8008000 0x100>;
 164                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 165                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 166                                 clock-names = "t0_clk", "slow_clk";
 167                         };
 168
 169                         tcb1: timer@f800c000 {
 170                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 171                                 #address-cells = <1>;
 172                                 #size-cells = <0>;
 173                                 reg = <0xf800c000 0x100>;
 174                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 175                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 176                                 clock-names = "t0_clk", "slow_clk";
 177                         };
 178
 179                         dma0: dma-controller@ffffec00 {
 180                                 compatible = "atmel,at91sam9g45-dma";
 181                                 reg = <0xffffec00 0x200>;
 182                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 183                                 #dma-cells = <2>;
 184                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 185                                 clock-names = "dma_clk";
 186                         };
 187
 188                         dma1: dma-controller@ffffee00 {
 189                                 compatible = "atmel,at91sam9g45-dma";
 190                                 reg = <0xffffee00 0x200>;
 191                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 192                                 #dma-cells = <2>;
 193                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 194                                 clock-names = "dma_clk";
 195                         };
 196
 197                         pinctrl: pinctrl@fffff400 {
 198                                 #address-cells = <1>;
 199                                 #size-cells = <1>;
 200                                 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 201                                 ranges = <0xfffff400 0xfffff400 0x800>;
 202
 203                                 /* shared pinctrl settings */
 204                                 dbgu {
 205                                         pinctrl_dbgu: dbgu-0 {
 206                                                 atmel,pins =
 207                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 208                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 209                                         };
 210                                 };
 211
 212                                 ebi {
 213                                         pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
 214                                                 atmel,pins =
 215                                                         <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
 216                                                          AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
 217                                                          AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
 218                                                          AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
 219                                                          AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
 220                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
 221                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
 222                                                          AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 223                                         };
 224
 225                                         pinctrl_ebi_data_8_15: ebi-data-msb-0 {
 226                                                 atmel,pins =
 227                                                         <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
 228                                                          AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
 229                                                          AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
 230                                                          AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
 231                                                          AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
 232                                                          AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
 233                                                          AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
 234                                                          AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 235                                         };
 236
 237                                         pinctrl_ebi_addr_nand: ebi-addr-0 {
 238                                                 atmel,pins =
 239                                                         <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
 240                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 241                                         };
 242                                 };
 243
 244                                 usart0 {
 245                                         pinctrl_usart0: usart0-0 {
 246                                                 atmel,pins =
 247                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
 248                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 249                                         };
 250
 251                                         pinctrl_usart0_rts: usart0_rts-0 {
 252                                                 atmel,pins =
 253                                                         <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A */
 254                                         };
 255
 256                                         pinctrl_usart0_cts: usart0_cts-0 {
 257                                                 atmel,pins =
 258                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA3 periph A */
 259                                         };
 260
 261                                         pinctrl_usart0_sck: usart0_sck-0 {
 262                                                 atmel,pins =
 263                                                         <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
 264                                         };
 265                                 };
 266
 267                                 usart1 {
 268                                         pinctrl_usart1: usart1-0 {
 269                                                 atmel,pins =
 270                                                         <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
 271                                                          AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 272                                         };
 273
 274                                         pinctrl_usart1_rts: usart1_rts-0 {
 275                                                 atmel,pins =
 276                                                         <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */
 277                                         };
 278
 279                                         pinctrl_usart1_cts: usart1_cts-0 {
 280                                                 atmel,pins =
 281                                                         <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */
 282                                         };
 283
 284                                         pinctrl_usart1_sck: usart1_sck-0 {
 285                                                 atmel,pins =
 286                                                         <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
 287                                         };
 288                                 };
 289
 290                                 usart2 {
 291                                         pinctrl_usart2: usart2-0 {
 292                                                 atmel,pins =
 293                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
 294                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 295                                         };
 296
 297                                         pinctrl_usart2_rts: usart2_rts-0 {
 298                                                 atmel,pins =
 299                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB0 periph B */
 300                                         };
 301
 302                                         pinctrl_usart2_cts: usart2_cts-0 {
 303                                                 atmel,pins =
 304                                                         <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB1 periph B */
 305                                         };
 306
 307                                         pinctrl_usart2_sck: usart2_sck-0 {
 308                                                 atmel,pins =
 309                                                         <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
 310                                         };
 311                                 };
 312
 313                                 uart0 {
 314                                         pinctrl_uart0: uart0-0 {
 315                                                 atmel,pins =
 316                                                         <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC8 periph C */
 317                                                          AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;       /* PC9 periph C with pullup */
 318                                         };
 319                                 };
 320
 321                                 uart1 {
 322                                         pinctrl_uart1: uart1-0 {
 323                                                 atmel,pins =
 324                                                         <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC16 periph C */
 325                                                          AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;      /* PC17 periph C with pullup */
 326                                         };
 327                                 };
 328
 329                                 nand {
 330                                         pinctrl_nand_oe_we: nand-oe-we-0 {
 331                                                 atmel,pins =
 332                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
 333                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 334                                         };
 335
 336                                         pinctrl_nand_rb: nand-rb-0 {
 337                                                 atmel,pins =
 338                                                         <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 339                                         };
 340
 341                                         pinctrl_nand_cs: nand-cs-0 {
 342                                                 atmel,pins =
 343                                                         <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 344                                         };
 345                                 };
 346
 347                                 mmc0 {
 348                                         pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 349                                                 atmel,pins =
 350                                                         <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 351                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
 352                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA15 periph A with pullup */
 353                                         };
 354
 355                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 356                                                 atmel,pins =
 357                                                         <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
 358                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
 359                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
 360                                         };
 361                                 };
 362
 363                                 mmc1 {
 364                                         pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 365                                                 atmel,pins =
 366                                                         <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA13 periph B */
 367                                                          AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA12 periph B with pullup */
 368                                                          AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PA11 periph B with pullup */
 369                                         };
 370
 371                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 372                                                 atmel,pins =
 373                                                         <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */
 374                                                          AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */
 375                                                          AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA4 periph B with pullup */
 376                                         };
 377                                 };
 378
 379                                 ssc0 {
 380                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 381                                                 atmel,pins =
 382                                                         <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
 383                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 384                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
 385                                         };
 386
 387                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 388                                                 atmel,pins =
 389                                                         <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 390                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 391                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 392                                         };
 393                                 };
 394
 395                                 spi0 {
 396                                         pinctrl_spi0: spi0-0 {
 397                                                 atmel,pins =
 398                                                         <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A SPI0_MISO pin */
 399                                                          AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A SPI0_MOSI pin */
 400                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
 401                                         };
 402                                 };
 403
 404                                 spi1 {
 405                                         pinctrl_spi1: spi1-0 {
 406                                                 atmel,pins =
 407                                                         <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA21 periph B SPI1_MISO pin */
 408                                                          AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B SPI1_MOSI pin */
 409                                                          AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
 410                                         };
 411                                 };
 412
 413                                 i2c0 {
 414                                         pinctrl_i2c0: i2c0-0 {
 415                                                 atmel,pins =
 416                                                         <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A I2C0 data */
 417                                                          AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */
 418                                         };
 419                                 };
 420
 421                                 i2c1 {
 422                                         pinctrl_i2c1: i2c1-0 {
 423                                                 atmel,pins =
 424                                                         <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC0 periph C I2C1 data */
 425                                                          AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* PC1 periph C I2C1 clock */
 426                                         };
 427                                 };
 428
 429                                 i2c2 {
 430                                         pinctrl_i2c2: i2c2-0 {
 431                                                 atmel,pins =
 432                                                         <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B I2C2 data */
 433                                                          AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B I2C2 clock */
 434                                         };
 435                                 };
 436
 437                                 i2c_gpio0 {
 438                                         pinctrl_i2c_gpio0: i2c_gpio0-0 {
 439                                                 atmel,pins =
 440                                                         <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */
 441                                                          AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;       /* PA31 gpio multidrive I2C0 clock */
 442                                         };
 443                                 };
 444
 445                                 i2c_gpio1 {
 446                                         pinctrl_i2c_gpio1: i2c_gpio1-0 {
 447                                                 atmel,pins =
 448                                                         <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PC0 gpio multidrive I2C1 data */
 449                                                          AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PC1 gpio multidrive I2C1 clock */
 450                                         };
 451                                 };
 452
 453                                 i2c_gpio2 {
 454                                         pinctrl_i2c_gpio2: i2c_gpio2-0 {
 455                                                 atmel,pins =
 456                                                         <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PB4 gpio multidrive I2C2 data */
 457                                                          AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PB5 gpio multidrive I2C2 clock */
 458                                         };
 459                                 };
 460
 461                                 pwm0 {
 462                                         pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
 463                                                 atmel,pins =
 464                                                         <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 465                                         };
 466                                         pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
 467                                                 atmel,pins =
 468                                                         <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 469                                         };
 470                                         pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
 471                                                 atmel,pins =
 472                                                         <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 473                                         };
 474
 475                                         pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
 476                                                 atmel,pins =
 477                                                         <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 478                                         };
 479                                         pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
 480                                                 atmel,pins =
 481                                                         <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 482                                         };
 483                                         pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
 484                                                 atmel,pins =
 485                                                         <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 486                                         };
 487
 488                                         pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
 489                                                 atmel,pins =
 490                                                         <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 491                                         };
 492                                         pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
 493                                                 atmel,pins =
 494                                                         <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 495                                         };
 496
 497                                         pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
 498                                                 atmel,pins =
 499                                                         <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 500                                         };
 501                                         pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
 502                                                 atmel,pins =
 503                                                         <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 504                                         };
 505                                 };
 506
 507                                 tcb0 {
 508                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 509                                                 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 510                                         };
 511
 512                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 513                                                 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 514                                         };
 515
 516                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 517                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 518                                         };
 519
 520                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 521                                                 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 522                                         };
 523
 524                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 525                                                 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 526                                         };
 527
 528                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 529                                                 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 530                                         };
 531
 532                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 533                                                 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 534                                         };
 535
 536                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 537                                                 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 538                                         };
 539
 540                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 541                                                 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 542                                         };
 543                                 };
 544
 545                                 tcb1 {
 546                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 547                                                 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 548                                         };
 549
 550                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 551                                                 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 552                                         };
 553
 554                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 555                                                 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 556                                         };
 557
 558                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 559                                                 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 560                                         };
 561
 562                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 563                                                 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 564                                         };
 565
 566                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 567                                                 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 568                                         };
 569
 570                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 571                                                 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 572                                         };
 573
 574                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 575                                                 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 576                                         };
 577
 578                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 579                                                 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 580                                         };
 581                                 };
 582
 583                                 pioA: gpio@fffff400 {
 584                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 585                                         reg = <0xfffff400 0x200>;
 586                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 587                                         #gpio-cells = <2>;
 588                                         gpio-controller;
 589                                         interrupt-controller;
 590                                         #interrupt-cells = <2>;
 591                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 592                                 };
 593
 594                                 pioB: gpio@fffff600 {
 595                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 596                                         reg = <0xfffff600 0x200>;
 597                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 598                                         #gpio-cells = <2>;
 599                                         gpio-controller;
 600                                         #gpio-lines = <19>;
 601                                         interrupt-controller;
 602                                         #interrupt-cells = <2>;
 603                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 604                                 };
 605
 606                                 pioC: gpio@fffff800 {
 607                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 608                                         reg = <0xfffff800 0x200>;
 609                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 610                                         #gpio-cells = <2>;
 611                                         gpio-controller;
 612                                         interrupt-controller;
 613                                         #interrupt-cells = <2>;
 614                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 615                                 };
 616
 617                                 pioD: gpio@fffffa00 {
 618                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 619                                         reg = <0xfffffa00 0x200>;
 620                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 621                                         #gpio-cells = <2>;
 622                                         gpio-controller;
 623                                         #gpio-lines = <22>;
 624                                         interrupt-controller;
 625                                         #interrupt-cells = <2>;
 626                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 627                                 };
 628                         };
 629
 630                         ssc0: ssc@f0010000 {
 631                                 compatible = "atmel,at91sam9g45-ssc";
 632                                 reg = <0xf0010000 0x4000>;
 633                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 634                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
 635                                        <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
 636                                 dma-names = "tx", "rx";
 637                                 pinctrl-names = "default";
 638                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 639                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 640                                 clock-names = "pclk";
 641                                 status = "disabled";
 642                         };
 643
 644                         mmc0: mmc@f0008000 {
 645                                 compatible = "atmel,hsmci";
 646                                 reg = <0xf0008000 0x600>;
 647                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 648                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 649                                 dma-names = "rxtx";
 650                                 pinctrl-names = "default";
 651                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 652                                 clock-names = "mci_clk";
 653                                 #address-cells = <1>;
 654                                 #size-cells = <0>;
 655                                 status = "disabled";
 656                         };
 657
 658                         mmc1: mmc@f000c000 {
 659                                 compatible = "atmel,hsmci";
 660                                 reg = <0xf000c000 0x600>;
 661                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 662                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 663                                 dma-names = "rxtx";
 664                                 pinctrl-names = "default";
 665                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
 666                                 clock-names = "mci_clk";
 667                                 #address-cells = <1>;
 668                                 #size-cells = <0>;
 669                                 status = "disabled";
 670                         };
 671
 672                         dbgu: serial@fffff200 {
 673                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 674                                 reg = <0xfffff200 0x200>;
 675                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 676                                 pinctrl-names = "default";
 677                                 pinctrl-0 = <&pinctrl_dbgu>;
 678                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
 679                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 680                                 dma-names = "tx", "rx";
 681                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 682                                 clock-names = "usart";
 683                                 status = "disabled";
 684                         };
 685
 686                         usart0: serial@f801c000 {
 687                                 compatible = "atmel,at91sam9260-usart";
 688                                 reg = <0xf801c000 0x200>;
 689                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 690                                 pinctrl-names = "default";
 691                                 pinctrl-0 = <&pinctrl_usart0>;
 692                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
 693                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 694                                 dma-names = "tx", "rx";
 695                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 696                                 clock-names = "usart";
 697                                 status = "disabled";
 698                         };
 699
 700                         usart1: serial@f8020000 {
 701                                 compatible = "atmel,at91sam9260-usart";
 702                                 reg = <0xf8020000 0x200>;
 703                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 704                                 pinctrl-names = "default";
 705                                 pinctrl-0 = <&pinctrl_usart1>;
 706                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
 707                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 708                                 dma-names = "tx", "rx";
 709                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 710                                 clock-names = "usart";
 711                                 status = "disabled";
 712                         };
 713
 714                         usart2: serial@f8024000 {
 715                                 compatible = "atmel,at91sam9260-usart";
 716                                 reg = <0xf8024000 0x200>;
 717                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 718                                 pinctrl-names = "default";
 719                                 pinctrl-0 = <&pinctrl_usart2>;
 720                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
 721                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 722                                 dma-names = "tx", "rx";
 723                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 724                                 clock-names = "usart";
 725                                 status = "disabled";
 726                         };
 727
 728                         i2c0: i2c@f8010000 {
 729                                 compatible = "atmel,at91sam9x5-i2c";
 730                                 reg = <0xf8010000 0x100>;
 731                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 732                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
 733                                        <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
 734                                 dma-names = "tx", "rx";
 735                                 #address-cells = <1>;
 736                                 #size-cells = <0>;
 737                                 pinctrl-names = "default";
 738                                 pinctrl-0 = <&pinctrl_i2c0>;
 739                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 740                                 status = "disabled";
 741                         };
 742
 743                         i2c1: i2c@f8014000 {
 744                                 compatible = "atmel,at91sam9x5-i2c";
 745                                 reg = <0xf8014000 0x100>;
 746                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
 747                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
 748                                        <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
 749                                 dma-names = "tx", "rx";
 750                                 #address-cells = <1>;
 751                                 #size-cells = <0>;
 752                                 pinctrl-names = "default";
 753                                 pinctrl-0 = <&pinctrl_i2c1>;
 754                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 755                                 status = "disabled";
 756                         };
 757
 758                         i2c2: i2c@f8018000 {
 759                                 compatible = "atmel,at91sam9x5-i2c";
 760                                 reg = <0xf8018000 0x100>;
 761                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 762                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
 763                                        <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
 764                                 dma-names = "tx", "rx";
 765                                 #address-cells = <1>;
 766                                 #size-cells = <0>;
 767                                 pinctrl-names = "default";
 768                                 pinctrl-0 = <&pinctrl_i2c2>;
 769                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 770                                 status = "disabled";
 771                         };
 772
 773                         uart0: serial@f8040000 {
 774                                 compatible = "atmel,at91sam9260-usart";
 775                                 reg = <0xf8040000 0x200>;
 776                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 777                                 pinctrl-names = "default";
 778                                 pinctrl-0 = <&pinctrl_uart0>;
 779                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 780                                 clock-names = "usart";
 781                                 status = "disabled";
 782                         };
 783
 784                         uart1: serial@f8044000 {
 785                                 compatible = "atmel,at91sam9260-usart";
 786                                 reg = <0xf8044000 0x200>;
 787                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 788                                 pinctrl-names = "default";
 789                                 pinctrl-0 = <&pinctrl_uart1>;
 790                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 791                                 clock-names = "usart";
 792                                 status = "disabled";
 793                         };
 794
 795                         adc0: adc@f804c000 {
 796                                 #address-cells = <1>;
 797                                 #size-cells = <0>;
 798                                 compatible = "atmel,at91sam9x5-adc";
 799                                 reg = <0xf804c000 0x100>;
 800                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 801                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
 802                                          <&adc_op_clk>;
 803                                 clock-names = "adc_clk", "adc_op_clk";
 804                                 atmel,adc-use-external-triggers;
 805                                 atmel,adc-channels-used = <0xffff>;
 806                                 atmel,adc-vref = <3300>;
 807                                 atmel,adc-startup-time = <40>;
 808                                 atmel,adc-sample-hold-time = <11>;
 809                                 atmel,adc-res = <8 10>;
 810                                 atmel,adc-res-names = "lowres", "highres";
 811                                 atmel,adc-use-res = "highres";
 812
 813                                 trigger0 {
 814                                         trigger-name = "external-rising";
 815                                         trigger-value = <0x1>;
 816                                         trigger-external;
 817                                 };
 818
 819                                 trigger1 {
 820                                         trigger-name = "external-falling";
 821                                         trigger-value = <0x2>;
 822                                         trigger-external;
 823                                 };
 824
 825                                 trigger2 {
 826                                         trigger-name = "external-any";
 827                                         trigger-value = <0x3>;
 828                                         trigger-external;
 829                                 };
 830
 831                                 trigger3 {
 832                                         trigger-name = "continuous";
 833                                         trigger-value = <0x6>;
 834                                 };
 835                         };
 836
 837                         spi0: spi@f0000000 {
 838                                 #address-cells = <1>;
 839                                 #size-cells = <0>;
 840                                 compatible = "atmel,at91rm9200-spi";
 841                                 reg = <0xf0000000 0x100>;
 842                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 843                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
 844                                        <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
 845                                 dma-names = "tx", "rx";
 846                                 pinctrl-names = "default";
 847                                 pinctrl-0 = <&pinctrl_spi0>;
 848                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 849                                 clock-names = "spi_clk";
 850                                 status = "disabled";
 851                         };
 852
 853                         spi1: spi@f0004000 {
 854                                 #address-cells = <1>;
 855                                 #size-cells = <0>;
 856                                 compatible = "atmel,at91rm9200-spi";
 857                                 reg = <0xf0004000 0x100>;
 858                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 859                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
 860                                        <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
 861                                 dma-names = "tx", "rx";
 862                                 pinctrl-names = "default";
 863                                 pinctrl-0 = <&pinctrl_spi1>;
 864                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 865                                 clock-names = "spi_clk";
 866                                 status = "disabled";
 867                         };
 868
 869                         usb2: gadget@f803c000 {
 870                                 #address-cells = <1>;
 871                                 #size-cells = <0>;
 872                                 compatible = "atmel,at91sam9g45-udc";
 873                                 reg = <0x00500000 0x80000
 874                                        0xf803c000 0x400>;
 875                                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
 876                                 clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 877                                 clock-names = "hclk", "pclk";
 878                                 status = "disabled";
 879
 880                                 ep@0 {
 881                                         reg = <0>;
 882                                         atmel,fifo-size = <64>;
 883                                         atmel,nb-banks = <1>;
 884                                 };
 885
 886                                 ep@1 {
 887                                         reg = <1>;
 888                                         atmel,fifo-size = <1024>;
 889                                         atmel,nb-banks = <2>;
 890                                         atmel,can-dma;
 891                                         atmel,can-isoc;
 892                                 };
 893
 894                                 ep@2 {
 895                                         reg = <2>;
 896                                         atmel,fifo-size = <1024>;
 897                                         atmel,nb-banks = <2>;
 898                                         atmel,can-dma;
 899                                         atmel,can-isoc;
 900                                 };
 901
 902                                 ep@3 {
 903                                         reg = <3>;
 904                                         atmel,fifo-size = <1024>;
 905                                         atmel,nb-banks = <3>;
 906                                         atmel,can-dma;
 907                                 };
 908
 909                                 ep@4 {
 910                                         reg = <4>;
 911                                         atmel,fifo-size = <1024>;
 912                                         atmel,nb-banks = <3>;
 913                                         atmel,can-dma;
 914                                 };
 915
 916                                 ep@5 {
 917                                         reg = <5>;
 918                                         atmel,fifo-size = <1024>;
 919                                         atmel,nb-banks = <3>;
 920                                         atmel,can-dma;
 921                                         atmel,can-isoc;
 922                                 };
 923
 924                                 ep@6 {
 925                                         reg = <6>;
 926                                         atmel,fifo-size = <1024>;
 927                                         atmel,nb-banks = <3>;
 928                                         atmel,can-dma;
 929                                         atmel,can-isoc;
 930                                 };
 931                         };
 932
 933                         watchdog: watchdog@fffffe40 {
 934                                 compatible = "atmel,at91sam9260-wdt";
 935                                 reg = <0xfffffe40 0x10>;
 936                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 937                                 clocks = <&clk32k>;
 938                                 atmel,watchdog-type = "hardware";
 939                                 atmel,reset-type = "all";
 940                                 atmel,dbg-halt;
 941                                 status = "disabled";
 942                         };
 943
 944                         rtc: rtc@fffffeb0 {
 945                                 compatible = "atmel,at91sam9x5-rtc";
 946                                 reg = <0xfffffeb0 0x40>;
 947                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 948                                 clocks = <&clk32k>;
 949                                 status = "disabled";
 950                         };
 951
 952                         pwm0: pwm@f8034000 {
 953                                 compatible = "atmel,at91sam9rl-pwm";
 954                                 reg = <0xf8034000 0x300>;
 955                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 956                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 957                                 #pwm-cells = <3>;
 958                                 status = "disabled";
 959                         };
 960                 };
 961
 962                 usb0: ohci@600000 {
 963                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 964                         reg = <0x00600000 0x100000>;
 965                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 966                         clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 967                         clock-names = "ohci_clk", "hclk", "uhpck";
 968                         status = "disabled";
 969                 };
 970
 971                 usb1: ehci@700000 {
 972                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 973                         reg = <0x00700000 0x100000>;
 974                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 975                         clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
 976                         clock-names = "usb_clk", "ehci_clk";
 977                         status = "disabled";
 978                 };
 979
 980                 ebi: ebi@10000000 {
 981                         compatible = "atmel,at91sam9x5-ebi";
 982                         #address-cells = <2>;
 983                         #size-cells = <1>;
 984                         atmel,smc = <&smc>;
 985                         atmel,matrix = <&matrix>;
 986                         reg = <0x10000000 0x60000000>;
 987                         ranges = <0x0 0x0 0x10000000 0x10000000
 988                                   0x1 0x0 0x20000000 0x10000000
 989                                   0x2 0x0 0x30000000 0x10000000
 990                                   0x3 0x0 0x40000000 0x10000000
 991                                   0x4 0x0 0x50000000 0x10000000
 992                                   0x5 0x0 0x60000000 0x10000000>;
 993                         clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 994                         status = "disabled";
 995
 996                         nand_controller: nand-controller {
 997                                 compatible = "atmel,at91sam9g45-nand-controller";
 998                                 ecc-engine = <&pmecc>;
 999                                 #address-cells = <2>;
1000                                 #size-cells = <1>;
1001                                 ranges;
1002                                 status = "disabled";
1003                         };
1004                 };
1005         };
1006
1007         i2c-gpio-0 {
1008                 compatible = "i2c-gpio";
1009                 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
1010                          &pioA 31 GPIO_ACTIVE_HIGH /* scl */
1011                         >;
1012                 i2c-gpio,sda-open-drain;
1013                 i2c-gpio,scl-open-drain;
1014                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1015                 #address-cells = <1>;
1016                 #size-cells = <0>;
1017                 pinctrl-names = "default";
1018                 pinctrl-0 = <&pinctrl_i2c_gpio0>;
1019                 status = "disabled";
1020         };
1021
1022         i2c-gpio-1 {
1023                 compatible = "i2c-gpio";
1024                 gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
1025                          &pioC 1 GPIO_ACTIVE_HIGH /* scl */
1026                         >;
1027                 i2c-gpio,sda-open-drain;
1028                 i2c-gpio,scl-open-drain;
1029                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1030                 #address-cells = <1>;
1031                 #size-cells = <0>;
1032                 pinctrl-names = "default";
1033                 pinctrl-0 = <&pinctrl_i2c_gpio1>;
1034                 status = "disabled";
1035         };
1036
1037         i2c-gpio-2 {
1038                 compatible = "i2c-gpio";
1039                 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
1040                          &pioB 5 GPIO_ACTIVE_HIGH /* scl */
1041                         >;
1042                 i2c-gpio,sda-open-drain;
1043                 i2c-gpio,scl-open-drain;
1044                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1045                 #address-cells = <1>;
1046                 #size-cells = <0>;
1047                 pinctrl-names = "default";
1048                 pinctrl-0 = <&pinctrl_i2c_gpio2>;
1049                 status = "disabled";
1050         };
1051 };