arch/arm/boot/dts/at91sam9x5.dtsi

   1 /*
   2  * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
   3  *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
   4  *                   AT91SAM9X25, AT91SAM9X35 SoC
   5  *
   6  *  Copyright (C) 2012 Atmel,
   7  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   8  *
   9  * Licensed under GPLv2 or later.
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include <dt-bindings/dma/at91.h>
  14 #include <dt-bindings/pinctrl/at91.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/clock/at91.h>
  18
  19 / {
  20         model = "Atmel AT91SAM9x5 family SoC";
  21         compatible = "atmel,at91sam9x5";
  22         interrupt-parent = <&aic>;
  23
  24         aliases {
  25                 serial0 = &dbgu;
  26                 serial1 = &usart0;
  27                 serial2 = &usart1;
  28                 serial3 = &usart2;
  29                 gpio0 = &pioA;
  30                 gpio1 = &pioB;
  31                 gpio2 = &pioC;
  32                 gpio3 = &pioD;
  33                 tcb0 = &tcb0;
  34                 tcb1 = &tcb1;
  35                 i2c0 = &i2c0;
  36                 i2c1 = &i2c1;
  37                 i2c2 = &i2c2;
  38                 ssc0 = &ssc0;
  39                 pwm0 = &pwm0;
  40         };
  41         cpus {
  42                 #address-cells = <0>;
  43                 #size-cells = <0>;
  44
  45                 cpu {
  46                         compatible = "arm,arm926ej-s";
  47                         device_type = "cpu";
  48                 };
  49         };
  50
  51         memory {
  52                 reg = <0x20000000 0x10000000>;
  53         };
  54
  55         clocks {
  56                 slow_xtal: slow_xtal {
  57                         compatible = "fixed-clock";
  58                         #clock-cells = <0>;
  59                         clock-frequency = <0>;
  60                 };
  61
  62                 main_xtal: main_xtal {
  63                         compatible = "fixed-clock";
  64                         #clock-cells = <0>;
  65                         clock-frequency = <0>;
  66                 };
  67
  68                 adc_op_clk: adc_op_clk{
  69                         compatible = "fixed-clock";
  70                         #clock-cells = <0>;
  71                         clock-frequency = <1000000>;
  72                 };
  73         };
  74
  75         sram: sram@300000 {
  76                 compatible = "mmio-sram";
  77                 reg = <0x00300000 0x8000>;
  78         };
  79
  80         ahb {
  81                 compatible = "simple-bus";
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 ranges;
  85
  86                 apb {
  87                         compatible = "simple-bus";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90                         ranges;
  91
  92                         aic: interrupt-controller@fffff000 {
  93                                 #interrupt-cells = <3>;
  94                                 compatible = "atmel,at91rm9200-aic";
  95                                 interrupt-controller;
  96                                 reg = <0xfffff000 0x200>;
  97                                 atmel,external-irqs = <31>;
  98                         };
  99
 100                         matrix: matrix@ffffde00 {
 101                                 compatible = "atmel,at91sam9x5-matrix", "syscon";
 102                                 reg = <0xffffde00 0x100>;
 103                         };
 104
 105                         pmecc: ecc-engine@ffffe000 {
 106                                 compatible = "atmel,at91sam9g45-pmecc";
 107                                 reg = <0xffffe000 0x600>,
 108                                       <0xffffe600 0x200>;
 109                         };
 110
 111                         ramc0: ramc@ffffe800 {
 112                                 compatible = "atmel,at91sam9g45-ddramc";
 113                                 reg = <0xffffe800 0x200>;
 114                                 clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 115                                 clock-names = "ddrck";
 116                         };
 117
 118                         smc: smc@ffffea00 {
 119                                 compatible = "atmel,at91sam9260-smc", "syscon";
 120                                 reg = <0xffffea00 0x200>;
 121                         };
 122
 123                         pmc: pmc@fffffc00 {
 124                                 compatible = "atmel,at91sam9x5-pmc", "syscon";
 125                                 reg = <0xfffffc00 0x200>;
 126                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 127                                 #clock-cells = <2>;
 128                                 clocks = <&clk32k>, <&main_xtal>;
 129                                 clock-names = "slow_clk", "main_xtal";
 130                         };
 131
 132                         reset_controller: rstc@fffffe00 {
 133                                 compatible = "atmel,at91sam9g45-rstc";
 134                                 reg = <0xfffffe00 0x10>;
 135                                 clocks = <&clk32k>;
 136                         };
 137
 138                         shutdown_controller: shdwc@fffffe10 {
 139                                 compatible = "atmel,at91sam9x5-shdwc";
 140                                 reg = <0xfffffe10 0x10>;
 141                                 clocks = <&clk32k>;
 142                         };
 143
 144                         pit: timer@fffffe30 {
 145                                 compatible = "atmel,at91sam9260-pit";
 146                                 reg = <0xfffffe30 0xf>;
 147                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 148                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 149                         };
 150
 151                         sckc@fffffe50 {
 152                                 compatible = "atmel,at91sam9x5-sckc";
 153                                 reg = <0xfffffe50 0x4>;
 154
 155                                 slow_osc: slow_osc {
 156                                         compatible = "atmel,at91sam9x5-clk-slow-osc";
 157                                         #clock-cells = <0>;
 158                                         clocks = <&slow_xtal>;
 159                                 };
 160
 161                                 slow_rc_osc: slow_rc_osc {
 162                                         compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
 163                                         #clock-cells = <0>;
 164                                         clock-frequency = <32768>;
 165                                         clock-accuracy = <50000000>;
 166                                 };
 167
 168                                 clk32k: slck {
 169                                         compatible = "atmel,at91sam9x5-clk-slow";
 170                                         #clock-cells = <0>;
 171                                         clocks = <&slow_rc_osc>, <&slow_osc>;
 172                                 };
 173                         };
 174
 175                         tcb0: timer@f8008000 {
 176                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 177                                 #address-cells = <1>;
 178                                 #size-cells = <0>;
 179                                 reg = <0xf8008000 0x100>;
 180                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 181                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 182                                 clock-names = "t0_clk", "slow_clk";
 183                         };
 184
 185                         tcb1: timer@f800c000 {
 186                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 187                                 #address-cells = <1>;
 188                                 #size-cells = <0>;
 189                                 reg = <0xf800c000 0x100>;
 190                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 191                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 192                                 clock-names = "t0_clk", "slow_clk";
 193                         };
 194
 195                         dma0: dma-controller@ffffec00 {
 196                                 compatible = "atmel,at91sam9g45-dma";
 197                                 reg = <0xffffec00 0x200>;
 198                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 199                                 #dma-cells = <2>;
 200                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 201                                 clock-names = "dma_clk";
 202                         };
 203
 204                         dma1: dma-controller@ffffee00 {
 205                                 compatible = "atmel,at91sam9g45-dma";
 206                                 reg = <0xffffee00 0x200>;
 207                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 208                                 #dma-cells = <2>;
 209                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 210                                 clock-names = "dma_clk";
 211                         };
 212
 213                         pinctrl: pinctrl@fffff400 {
 214                                 #address-cells = <1>;
 215                                 #size-cells = <1>;
 216                                 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 217                                 ranges = <0xfffff400 0xfffff400 0x800>;
 218
 219                                 /* shared pinctrl settings */
 220                                 dbgu {
 221                                         pinctrl_dbgu: dbgu-0 {
 222                                                 atmel,pins =
 223                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 224                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 225                                         };
 226                                 };
 227
 228                                 ebi {
 229                                         pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
 230                                                 atmel,pins =
 231                                                         <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
 232                                                          AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
 233                                                          AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
 234                                                          AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
 235                                                          AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
 236                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
 237                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
 238                                                          AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 239                                         };
 240
 241                                         pinctrl_ebi_data_8_15: ebi-data-msb-0 {
 242                                                 atmel,pins =
 243                                                         <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
 244                                                          AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
 245                                                          AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
 246                                                          AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
 247                                                          AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
 248                                                          AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
 249                                                          AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
 250                                                          AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 251                                         };
 252
 253                                         pinctrl_ebi_addr_nand: ebi-addr-0 {
 254                                                 atmel,pins =
 255                                                         <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
 256                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 257                                         };
 258                                 };
 259
 260                                 usart0 {
 261                                         pinctrl_usart0: usart0-0 {
 262                                                 atmel,pins =
 263                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
 264                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 265                                         };
 266
 267                                         pinctrl_usart0_rts: usart0_rts-0 {
 268                                                 atmel,pins =
 269                                                         <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A */
 270                                         };
 271
 272                                         pinctrl_usart0_cts: usart0_cts-0 {
 273                                                 atmel,pins =
 274                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA3 periph A */
 275                                         };
 276
 277                                         pinctrl_usart0_sck: usart0_sck-0 {
 278                                                 atmel,pins =
 279                                                         <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
 280                                         };
 281                                 };
 282
 283                                 usart1 {
 284                                         pinctrl_usart1: usart1-0 {
 285                                                 atmel,pins =
 286                                                         <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
 287                                                          AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 288                                         };
 289
 290                                         pinctrl_usart1_rts: usart1_rts-0 {
 291                                                 atmel,pins =
 292                                                         <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */
 293                                         };
 294
 295                                         pinctrl_usart1_cts: usart1_cts-0 {
 296                                                 atmel,pins =
 297                                                         <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */
 298                                         };
 299
 300                                         pinctrl_usart1_sck: usart1_sck-0 {
 301                                                 atmel,pins =
 302                                                         <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
 303                                         };
 304                                 };
 305
 306                                 usart2 {
 307                                         pinctrl_usart2: usart2-0 {
 308                                                 atmel,pins =
 309                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
 310                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 311                                         };
 312
 313                                         pinctrl_usart2_rts: usart2_rts-0 {
 314                                                 atmel,pins =
 315                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB0 periph B */
 316                                         };
 317
 318                                         pinctrl_usart2_cts: usart2_cts-0 {
 319                                                 atmel,pins =
 320                                                         <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB1 periph B */
 321                                         };
 322
 323                                         pinctrl_usart2_sck: usart2_sck-0 {
 324                                                 atmel,pins =
 325                                                         <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
 326                                         };
 327                                 };
 328
 329                                 uart0 {
 330                                         pinctrl_uart0: uart0-0 {
 331                                                 atmel,pins =
 332                                                         <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC8 periph C */
 333                                                          AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;       /* PC9 periph C with pullup */
 334                                         };
 335                                 };
 336
 337                                 uart1 {
 338                                         pinctrl_uart1: uart1-0 {
 339                                                 atmel,pins =
 340                                                         <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC16 periph C */
 341                                                          AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;      /* PC17 periph C with pullup */
 342                                         };
 343                                 };
 344
 345                                 nand {
 346                                         pinctrl_nand_oe_we: nand-oe-we-0 {
 347                                                 atmel,pins =
 348                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
 349                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 350                                         };
 351
 352                                         pinctrl_nand_rb: nand-rb-0 {
 353                                                 atmel,pins =
 354                                                         <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 355                                         };
 356
 357                                         pinctrl_nand_cs: nand-cs-0 {
 358                                                 atmel,pins =
 359                                                         <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 360                                         };
 361                                 };
 362
 363                                 mmc0 {
 364                                         pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 365                                                 atmel,pins =
 366                                                         <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 367                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
 368                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA15 periph A with pullup */
 369                                         };
 370
 371                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 372                                                 atmel,pins =
 373                                                         <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
 374                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
 375                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
 376                                         };
 377                                 };
 378
 379                                 mmc1 {
 380                                         pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 381                                                 atmel,pins =
 382                                                         <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA13 periph B */
 383                                                          AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA12 periph B with pullup */
 384                                                          AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PA11 periph B with pullup */
 385                                         };
 386
 387                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 388                                                 atmel,pins =
 389                                                         <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */
 390                                                          AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */
 391                                                          AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA4 periph B with pullup */
 392                                         };
 393                                 };
 394
 395                                 ssc0 {
 396                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 397                                                 atmel,pins =
 398                                                         <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
 399                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 400                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
 401                                         };
 402
 403                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 404                                                 atmel,pins =
 405                                                         <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 406                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 407                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 408                                         };
 409                                 };
 410
 411                                 spi0 {
 412                                         pinctrl_spi0: spi0-0 {
 413                                                 atmel,pins =
 414                                                         <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A SPI0_MISO pin */
 415                                                          AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A SPI0_MOSI pin */
 416                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
 417                                         };
 418                                 };
 419
 420                                 spi1 {
 421                                         pinctrl_spi1: spi1-0 {
 422                                                 atmel,pins =
 423                                                         <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA21 periph B SPI1_MISO pin */
 424                                                          AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B SPI1_MOSI pin */
 425                                                          AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
 426                                         };
 427                                 };
 428
 429                                 i2c0 {
 430                                         pinctrl_i2c0: i2c0-0 {
 431                                                 atmel,pins =
 432                                                         <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A I2C0 data */
 433                                                          AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */
 434                                         };
 435                                 };
 436
 437                                 i2c1 {
 438                                         pinctrl_i2c1: i2c1-0 {
 439                                                 atmel,pins =
 440                                                         <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC0 periph C I2C1 data */
 441                                                          AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* PC1 periph C I2C1 clock */
 442                                         };
 443                                 };
 444
 445                                 i2c2 {
 446                                         pinctrl_i2c2: i2c2-0 {
 447                                                 atmel,pins =
 448                                                         <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B I2C2 data */
 449                                                          AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B I2C2 clock */
 450                                         };
 451                                 };
 452
 453                                 i2c_gpio0 {
 454                                         pinctrl_i2c_gpio0: i2c_gpio0-0 {
 455                                                 atmel,pins =
 456                                                         <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */
 457                                                          AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;       /* PA31 gpio multidrive I2C0 clock */
 458                                         };
 459                                 };
 460
 461                                 i2c_gpio1 {
 462                                         pinctrl_i2c_gpio1: i2c_gpio1-0 {
 463                                                 atmel,pins =
 464                                                         <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PC0 gpio multidrive I2C1 data */
 465                                                          AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PC1 gpio multidrive I2C1 clock */
 466                                         };
 467                                 };
 468
 469                                 i2c_gpio2 {
 470                                         pinctrl_i2c_gpio2: i2c_gpio2-0 {
 471                                                 atmel,pins =
 472                                                         <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PB4 gpio multidrive I2C2 data */
 473                                                          AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PB5 gpio multidrive I2C2 clock */
 474                                         };
 475                                 };
 476
 477                                 pwm0 {
 478                                         pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
 479                                                 atmel,pins =
 480                                                         <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 481                                         };
 482                                         pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
 483                                                 atmel,pins =
 484                                                         <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 485                                         };
 486                                         pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
 487                                                 atmel,pins =
 488                                                         <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 489                                         };
 490
 491                                         pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
 492                                                 atmel,pins =
 493                                                         <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 494                                         };
 495                                         pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
 496                                                 atmel,pins =
 497                                                         <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 498                                         };
 499                                         pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
 500                                                 atmel,pins =
 501                                                         <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 502                                         };
 503
 504                                         pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
 505                                                 atmel,pins =
 506                                                         <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 507                                         };
 508                                         pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
 509                                                 atmel,pins =
 510                                                         <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 511                                         };
 512
 513                                         pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
 514                                                 atmel,pins =
 515                                                         <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 516                                         };
 517                                         pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
 518                                                 atmel,pins =
 519                                                         <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 520                                         };
 521                                 };
 522
 523                                 tcb0 {
 524                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 525                                                 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 526                                         };
 527
 528                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 529                                                 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 530                                         };
 531
 532                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 533                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 534                                         };
 535
 536                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 537                                                 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 538                                         };
 539
 540                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 541                                                 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 542                                         };
 543
 544                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 545                                                 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 546                                         };
 547
 548                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 549                                                 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 550                                         };
 551
 552                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 553                                                 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 554                                         };
 555
 556                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 557                                                 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 558                                         };
 559                                 };
 560
 561                                 tcb1 {
 562                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 563                                                 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 564                                         };
 565
 566                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 567                                                 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 568                                         };
 569
 570                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 571                                                 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 572                                         };
 573
 574                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 575                                                 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 576                                         };
 577
 578                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 579                                                 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 580                                         };
 581
 582                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 583                                                 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 584                                         };
 585
 586                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 587                                                 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 588                                         };
 589
 590                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 591                                                 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 592                                         };
 593
 594                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 595                                                 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 596                                         };
 597                                 };
 598
 599                                 pioA: gpio@fffff400 {
 600                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 601                                         reg = <0xfffff400 0x200>;
 602                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 603                                         #gpio-cells = <2>;
 604                                         gpio-controller;
 605                                         interrupt-controller;
 606                                         #interrupt-cells = <2>;
 607                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 608                                 };
 609
 610                                 pioB: gpio@fffff600 {
 611                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 612                                         reg = <0xfffff600 0x200>;
 613                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 614                                         #gpio-cells = <2>;
 615                                         gpio-controller;
 616                                         #gpio-lines = <19>;
 617                                         interrupt-controller;
 618                                         #interrupt-cells = <2>;
 619                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 620                                 };
 621
 622                                 pioC: gpio@fffff800 {
 623                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 624                                         reg = <0xfffff800 0x200>;
 625                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 626                                         #gpio-cells = <2>;
 627                                         gpio-controller;
 628                                         interrupt-controller;
 629                                         #interrupt-cells = <2>;
 630                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 631                                 };
 632
 633                                 pioD: gpio@fffffa00 {
 634                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 635                                         reg = <0xfffffa00 0x200>;
 636                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 637                                         #gpio-cells = <2>;
 638                                         gpio-controller;
 639                                         #gpio-lines = <22>;
 640                                         interrupt-controller;
 641                                         #interrupt-cells = <2>;
 642                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 643                                 };
 644                         };
 645
 646                         ssc0: ssc@f0010000 {
 647                                 compatible = "atmel,at91sam9g45-ssc";
 648                                 reg = <0xf0010000 0x4000>;
 649                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 650                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
 651                                        <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
 652                                 dma-names = "tx", "rx";
 653                                 pinctrl-names = "default";
 654                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 655                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 656                                 clock-names = "pclk";
 657                                 status = "disabled";
 658                         };
 659
 660                         mmc0: mmc@f0008000 {
 661                                 compatible = "atmel,hsmci";
 662                                 reg = <0xf0008000 0x600>;
 663                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 664                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 665                                 dma-names = "rxtx";
 666                                 pinctrl-names = "default";
 667                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 668                                 clock-names = "mci_clk";
 669                                 #address-cells = <1>;
 670                                 #size-cells = <0>;
 671                                 status = "disabled";
 672                         };
 673
 674                         mmc1: mmc@f000c000 {
 675                                 compatible = "atmel,hsmci";
 676                                 reg = <0xf000c000 0x600>;
 677                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 678                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 679                                 dma-names = "rxtx";
 680                                 pinctrl-names = "default";
 681                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
 682                                 clock-names = "mci_clk";
 683                                 #address-cells = <1>;
 684                                 #size-cells = <0>;
 685                                 status = "disabled";
 686                         };
 687
 688                         dbgu: serial@fffff200 {
 689                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 690                                 reg = <0xfffff200 0x200>;
 691                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 692                                 pinctrl-names = "default";
 693                                 pinctrl-0 = <&pinctrl_dbgu>;
 694                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
 695                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 696                                 dma-names = "tx", "rx";
 697                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 698                                 clock-names = "usart";
 699                                 status = "disabled";
 700                         };
 701
 702                         usart0: serial@f801c000 {
 703                                 compatible = "atmel,at91sam9260-usart";
 704                                 reg = <0xf801c000 0x200>;
 705                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 706                                 pinctrl-names = "default";
 707                                 pinctrl-0 = <&pinctrl_usart0>;
 708                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
 709                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 710                                 dma-names = "tx", "rx";
 711                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 712                                 clock-names = "usart";
 713                                 status = "disabled";
 714                         };
 715
 716                         usart1: serial@f8020000 {
 717                                 compatible = "atmel,at91sam9260-usart";
 718                                 reg = <0xf8020000 0x200>;
 719                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 720                                 pinctrl-names = "default";
 721                                 pinctrl-0 = <&pinctrl_usart1>;
 722                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
 723                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 724                                 dma-names = "tx", "rx";
 725                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 726                                 clock-names = "usart";
 727                                 status = "disabled";
 728                         };
 729
 730                         usart2: serial@f8024000 {
 731                                 compatible = "atmel,at91sam9260-usart";
 732                                 reg = <0xf8024000 0x200>;
 733                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 734                                 pinctrl-names = "default";
 735                                 pinctrl-0 = <&pinctrl_usart2>;
 736                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
 737                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 738                                 dma-names = "tx", "rx";
 739                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 740                                 clock-names = "usart";
 741                                 status = "disabled";
 742                         };
 743
 744                         i2c0: i2c@f8010000 {
 745                                 compatible = "atmel,at91sam9x5-i2c";
 746                                 reg = <0xf8010000 0x100>;
 747                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 748                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
 749                                        <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
 750                                 dma-names = "tx", "rx";
 751                                 #address-cells = <1>;
 752                                 #size-cells = <0>;
 753                                 pinctrl-names = "default";
 754                                 pinctrl-0 = <&pinctrl_i2c0>;
 755                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 756                                 status = "disabled";
 757                         };
 758
 759                         i2c1: i2c@f8014000 {
 760                                 compatible = "atmel,at91sam9x5-i2c";
 761                                 reg = <0xf8014000 0x100>;
 762                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
 763                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
 764                                        <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
 765                                 dma-names = "tx", "rx";
 766                                 #address-cells = <1>;
 767                                 #size-cells = <0>;
 768                                 pinctrl-names = "default";
 769                                 pinctrl-0 = <&pinctrl_i2c1>;
 770                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 771                                 status = "disabled";
 772                         };
 773
 774                         i2c2: i2c@f8018000 {
 775                                 compatible = "atmel,at91sam9x5-i2c";
 776                                 reg = <0xf8018000 0x100>;
 777                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 778                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
 779                                        <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
 780                                 dma-names = "tx", "rx";
 781                                 #address-cells = <1>;
 782                                 #size-cells = <0>;
 783                                 pinctrl-names = "default";
 784                                 pinctrl-0 = <&pinctrl_i2c2>;
 785                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 786                                 status = "disabled";
 787                         };
 788
 789                         uart0: serial@f8040000 {
 790                                 compatible = "atmel,at91sam9260-usart";
 791                                 reg = <0xf8040000 0x200>;
 792                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 793                                 pinctrl-names = "default";
 794                                 pinctrl-0 = <&pinctrl_uart0>;
 795                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 796                                 clock-names = "usart";
 797                                 status = "disabled";
 798                         };
 799
 800                         uart1: serial@f8044000 {
 801                                 compatible = "atmel,at91sam9260-usart";
 802                                 reg = <0xf8044000 0x200>;
 803                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 804                                 pinctrl-names = "default";
 805                                 pinctrl-0 = <&pinctrl_uart1>;
 806                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 807                                 clock-names = "usart";
 808                                 status = "disabled";
 809                         };
 810
 811                         adc0: adc@f804c000 {
 812                                 #address-cells = <1>;
 813                                 #size-cells = <0>;
 814                                 compatible = "atmel,at91sam9x5-adc";
 815                                 reg = <0xf804c000 0x100>;
 816                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 817                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
 818                                          <&adc_op_clk>;
 819                                 clock-names = "adc_clk", "adc_op_clk";
 820                                 atmel,adc-use-external-triggers;
 821                                 atmel,adc-channels-used = <0xffff>;
 822                                 atmel,adc-vref = <3300>;
 823                                 atmel,adc-startup-time = <40>;
 824                                 atmel,adc-sample-hold-time = <11>;
 825                                 atmel,adc-res = <8 10>;
 826                                 atmel,adc-res-names = "lowres", "highres";
 827                                 atmel,adc-use-res = "highres";
 828
 829                                 trigger0 {
 830                                         trigger-name = "external-rising";
 831                                         trigger-value = <0x1>;
 832                                         trigger-external;
 833                                 };
 834
 835                                 trigger1 {
 836                                         trigger-name = "external-falling";
 837                                         trigger-value = <0x2>;
 838                                         trigger-external;
 839                                 };
 840
 841                                 trigger2 {
 842                                         trigger-name = "external-any";
 843                                         trigger-value = <0x3>;
 844                                         trigger-external;
 845                                 };
 846
 847                                 trigger3 {
 848                                         trigger-name = "continuous";
 849                                         trigger-value = <0x6>;
 850                                 };
 851                         };
 852
 853                         spi0: spi@f0000000 {
 854                                 #address-cells = <1>;
 855                                 #size-cells = <0>;
 856                                 compatible = "atmel,at91rm9200-spi";
 857                                 reg = <0xf0000000 0x100>;
 858                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 859                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
 860                                        <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
 861                                 dma-names = "tx", "rx";
 862                                 pinctrl-names = "default";
 863                                 pinctrl-0 = <&pinctrl_spi0>;
 864                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 865                                 clock-names = "spi_clk";
 866                                 status = "disabled";
 867                         };
 868
 869                         spi1: spi@f0004000 {
 870                                 #address-cells = <1>;
 871                                 #size-cells = <0>;
 872                                 compatible = "atmel,at91rm9200-spi";
 873                                 reg = <0xf0004000 0x100>;
 874                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 875                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
 876                                        <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
 877                                 dma-names = "tx", "rx";
 878                                 pinctrl-names = "default";
 879                                 pinctrl-0 = <&pinctrl_spi1>;
 880                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 881                                 clock-names = "spi_clk";
 882                                 status = "disabled";
 883                         };
 884
 885                         usb2: gadget@f803c000 {
 886                                 #address-cells = <1>;
 887                                 #size-cells = <0>;
 888                                 compatible = "atmel,at91sam9g45-udc";
 889                                 reg = <0x00500000 0x80000
 890                                        0xf803c000 0x400>;
 891                                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
 892                                 clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 893                                 clock-names = "hclk", "pclk";
 894                                 status = "disabled";
 895
 896                                 ep@0 {
 897                                         reg = <0>;
 898                                         atmel,fifo-size = <64>;
 899                                         atmel,nb-banks = <1>;
 900                                 };
 901
 902                                 ep@1 {
 903                                         reg = <1>;
 904                                         atmel,fifo-size = <1024>;
 905                                         atmel,nb-banks = <2>;
 906                                         atmel,can-dma;
 907                                         atmel,can-isoc;
 908                                 };
 909
 910                                 ep@2 {
 911                                         reg = <2>;
 912                                         atmel,fifo-size = <1024>;
 913                                         atmel,nb-banks = <2>;
 914                                         atmel,can-dma;
 915                                         atmel,can-isoc;
 916                                 };
 917
 918                                 ep@3 {
 919                                         reg = <3>;
 920                                         atmel,fifo-size = <1024>;
 921                                         atmel,nb-banks = <3>;
 922                                         atmel,can-dma;
 923                                 };
 924
 925                                 ep@4 {
 926                                         reg = <4>;
 927                                         atmel,fifo-size = <1024>;
 928                                         atmel,nb-banks = <3>;
 929                                         atmel,can-dma;
 930                                 };
 931
 932                                 ep@5 {
 933                                         reg = <5>;
 934                                         atmel,fifo-size = <1024>;
 935                                         atmel,nb-banks = <3>;
 936                                         atmel,can-dma;
 937                                         atmel,can-isoc;
 938                                 };
 939
 940                                 ep@6 {
 941                                         reg = <6>;
 942                                         atmel,fifo-size = <1024>;
 943                                         atmel,nb-banks = <3>;
 944                                         atmel,can-dma;
 945                                         atmel,can-isoc;
 946                                 };
 947                         };
 948
 949                         watchdog: watchdog@fffffe40 {
 950                                 compatible = "atmel,at91sam9260-wdt";
 951                                 reg = <0xfffffe40 0x10>;
 952                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 953                                 clocks = <&clk32k>;
 954                                 atmel,watchdog-type = "hardware";
 955                                 atmel,reset-type = "all";
 956                                 atmel,dbg-halt;
 957                                 status = "disabled";
 958                         };
 959
 960                         rtc@fffffeb0 {
 961                                 compatible = "atmel,at91sam9x5-rtc";
 962                                 reg = <0xfffffeb0 0x40>;
 963                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 964                                 clocks = <&clk32k>;
 965                                 status = "disabled";
 966                         };
 967
 968                         pwm0: pwm@f8034000 {
 969                                 compatible = "atmel,at91sam9rl-pwm";
 970                                 reg = <0xf8034000 0x300>;
 971                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 972                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 973                                 #pwm-cells = <3>;
 974                                 status = "disabled";
 975                         };
 976                 };
 977
 978                 usb0: ohci@600000 {
 979                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 980                         reg = <0x00600000 0x100000>;
 981                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 982                         clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 983                         clock-names = "ohci_clk", "hclk", "uhpck";
 984                         status = "disabled";
 985                 };
 986
 987                 usb1: ehci@700000 {
 988                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 989                         reg = <0x00700000 0x100000>;
 990                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 991                         clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
 992                         clock-names = "usb_clk", "ehci_clk";
 993                         status = "disabled";
 994                 };
 995
 996                 ebi: ebi@10000000 {
 997                         compatible = "atmel,at91sam9x5-ebi";
 998                         #address-cells = <2>;
 999                         #size-cells = <1>;
1000                         atmel,smc = <&smc>;
1001                         atmel,matrix = <&matrix>;
1002                         reg = <0x10000000 0x60000000>;
1003                         ranges = <0x0 0x0 0x10000000 0x10000000
1004                                   0x1 0x0 0x20000000 0x10000000
1005                                   0x2 0x0 0x30000000 0x10000000
1006                                   0x3 0x0 0x40000000 0x10000000
1007                                   0x4 0x0 0x50000000 0x10000000
1008                                   0x5 0x0 0x60000000 0x10000000>;
1009                         clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
1010                         status = "disabled";
1011
1012                         nand_controller: nand-controller {
1013                                 compatible = "atmel,at91sam9g45-nand-controller";
1014                                 ecc-engine = <&pmecc>;
1015                                 #address-cells = <2>;
1016                                 #size-cells = <1>;
1017                                 ranges;
1018                                 status = "disabled";
1019                         };
1020                 };
1021         };
1022
1023         i2c-gpio-0 {
1024                 compatible = "i2c-gpio";
1025                 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
1026                          &pioA 31 GPIO_ACTIVE_HIGH /* scl */
1027                         >;
1028                 i2c-gpio,sda-open-drain;
1029                 i2c-gpio,scl-open-drain;
1030                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1031                 #address-cells = <1>;
1032                 #size-cells = <0>;
1033                 pinctrl-names = "default";
1034                 pinctrl-0 = <&pinctrl_i2c_gpio0>;
1035                 status = "disabled";
1036         };
1037
1038         i2c-gpio-1 {
1039                 compatible = "i2c-gpio";
1040                 gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
1041                          &pioC 1 GPIO_ACTIVE_HIGH /* scl */
1042                         >;
1043                 i2c-gpio,sda-open-drain;
1044                 i2c-gpio,scl-open-drain;
1045                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1046                 #address-cells = <1>;
1047                 #size-cells = <0>;
1048                 pinctrl-names = "default";
1049                 pinctrl-0 = <&pinctrl_i2c_gpio1>;
1050                 status = "disabled";
1051         };
1052
1053         i2c-gpio-2 {
1054                 compatible = "i2c-gpio";
1055                 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
1056                          &pioB 5 GPIO_ACTIVE_HIGH /* scl */
1057                         >;
1058                 i2c-gpio,sda-open-drain;
1059                 i2c-gpio,scl-open-drain;
1060                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1061                 #address-cells = <1>;
1062                 #size-cells = <0>;
1063                 pinctrl-names = "default";
1064                 pinctrl-0 = <&pinctrl_i2c_gpio2>;
1065                 status = "disabled";
1066         };
1067 };