arch/arm/boot/dts/at91sam9263.dtsi

   1 /*
   2  * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
   3  *
   4  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   5  *
   6  * Licensed under GPLv2 only.
   7  */
   8
   9 #include "skeleton.dtsi"
  10 #include <dt-bindings/pinctrl/at91.h>
  11 #include <dt-bindings/interrupt-controller/irq.h>
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/clock/at91.h>
  14
  15 / {
  16         model = "Atmel AT91SAM9263 family SoC";
  17         compatible = "atmel,at91sam9263";
  18         interrupt-parent = <&aic>;
  19
  20         aliases {
  21                 serial0 = &dbgu;
  22                 serial1 = &usart0;
  23                 serial2 = &usart1;
  24                 serial3 = &usart2;
  25                 gpio0 = &pioA;
  26                 gpio1 = &pioB;
  27                 gpio2 = &pioC;
  28                 gpio3 = &pioD;
  29                 gpio4 = &pioE;
  30                 tcb0 = &tcb0;
  31                 i2c0 = &i2c0;
  32                 ssc0 = &ssc0;
  33                 ssc1 = &ssc1;
  34                 pwm0 = &pwm0;
  35         };
  36
  37         cpus {
  38                 #address-cells = <0>;
  39                 #size-cells = <0>;
  40
  41                 cpu {
  42                         compatible = "arm,arm926ej-s";
  43                         device_type = "cpu";
  44                 };
  45         };
  46
  47         memory {
  48                 reg = <0x20000000 0x08000000>;
  49         };
  50
  51         clocks {
  52                 main_xtal: main_xtal {
  53                         compatible = "fixed-clock";
  54                         #clock-cells = <0>;
  55                         clock-frequency = <0>;
  56                 };
  57
  58                 slow_xtal: slow_xtal {
  59                         compatible = "fixed-clock";
  60                         #clock-cells = <0>;
  61                         clock-frequency = <0>;
  62                 };
  63         };
  64
  65         sram0: sram@00300000 {
  66                 compatible = "mmio-sram";
  67                 reg = <0x00300000 0x14000>;
  68         };
  69
  70         sram1: sram@00500000 {
  71                 compatible = "mmio-sram";
  72                 reg = <0x00500000 0x4000>;
  73         };
  74
  75         ahb {
  76                 compatible = "simple-bus";
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79                 ranges;
  80
  81                 apb {
  82                         compatible = "simple-bus";
  83                         #address-cells = <1>;
  84                         #size-cells = <1>;
  85                         ranges;
  86
  87                         aic: interrupt-controller@fffff000 {
  88                                 #interrupt-cells = <3>;
  89                                 compatible = "atmel,at91rm9200-aic";
  90                                 interrupt-controller;
  91                                 reg = <0xfffff000 0x200>;
  92                                 atmel,external-irqs = <30 31>;
  93                         };
  94
  95                         pmc: pmc@fffffc00 {
  96                                 compatible = "atmel,at91rm9200-pmc";
  97                                 reg = <0xfffffc00 0x100>;
  98                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
  99                                 interrupt-controller;
 100                                 #address-cells = <1>;
 101                                 #size-cells = <0>;
 102                                 #interrupt-cells = <1>;
 103
 104                                 main_osc: main_osc {
 105                                         compatible = "atmel,at91rm9200-clk-main-osc";
 106                                         #clock-cells = <0>;
 107                                         interrupts-extended = <&pmc AT91_PMC_MOSCS>;
 108                                         clocks = <&main_xtal>;
 109                                 };
 110
 111                                 main: mainck {
 112                                         compatible = "atmel,at91rm9200-clk-main";
 113                                         #clock-cells = <0>;
 114                                         clocks = <&main_osc>;
 115                                 };
 116
 117                                 plla: pllack {
 118                                         compatible = "atmel,at91rm9200-clk-pll";
 119                                         #clock-cells = <0>;
 120                                         interrupts-extended = <&pmc AT91_PMC_LOCKA>;
 121                                         clocks = <&main>;
 122                                         reg = <0>;
 123                                         atmel,clk-input-range = <1000000 32000000>;
 124                                         #atmel,pll-clk-output-range-cells = <4>;
 125                                         atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
 126                                                                 <190000000 240000000 2 1>;
 127                                 };
 128
 129                                 pllb: pllbck {
 130                                         compatible = "atmel,at91rm9200-clk-pll";
 131                                         #clock-cells = <0>;
 132                                         interrupts-extended = <&pmc AT91_PMC_LOCKB>;
 133                                         clocks = <&main>;
 134                                         reg = <1>;
 135                                         atmel,clk-input-range = <1000000 32000000>;
 136                                         #atmel,pll-clk-output-range-cells = <4>;
 137                                         atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
 138                                                                 <190000000 240000000 2 1>;
 139                                 };
 140
 141                                 mck: masterck {
 142                                         compatible = "atmel,at91rm9200-clk-master";
 143                                         #clock-cells = <0>;
 144                                         interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
 145                                         clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
 146                                         atmel,clk-output-range = <0 120000000>;
 147                                         atmel,clk-divisors = <1 2 4 0>;
 148                                 };
 149
 150                                 usb: usbck {
 151                                         compatible = "atmel,at91rm9200-clk-usb";
 152                                         #clock-cells = <0>;
 153                                         atmel,clk-divisors = <1 2 4 0>;
 154                                         clocks = <&pllb>;
 155                                 };
 156
 157                                 prog: progck {
 158                                         compatible = "atmel,at91rm9200-clk-programmable";
 159                                         #address-cells = <1>;
 160                                         #size-cells = <0>;
 161                                         interrupt-parent = <&pmc>;
 162                                         clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
 163
 164                                         prog0: prog0 {
 165                                                 #clock-cells = <0>;
 166                                                 reg = <0>;
 167                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
 168                                         };
 169
 170                                         prog1: prog1 {
 171                                                 #clock-cells = <0>;
 172                                                 reg = <1>;
 173                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
 174                                         };
 175
 176                                         prog2: prog2 {
 177                                                 #clock-cells = <0>;
 178                                                 reg = <2>;
 179                                                 interrupts = <AT91_PMC_PCKRDY(2)>;
 180                                         };
 181
 182                                         prog3: prog3 {
 183                                                 #clock-cells = <0>;
 184                                                 reg = <3>;
 185                                                 interrupts = <AT91_PMC_PCKRDY(3)>;
 186                                         };
 187                                 };
 188
 189                                 systemck {
 190                                         compatible = "atmel,at91rm9200-clk-system";
 191                                         #address-cells = <1>;
 192                                         #size-cells = <0>;
 193
 194                                         uhpck: uhpck {
 195                                                 #clock-cells = <0>;
 196                                                 reg = <6>;
 197                                                 clocks = <&usb>;
 198                                         };
 199
 200                                         udpck: udpck {
 201                                                 #clock-cells = <0>;
 202                                                 reg = <7>;
 203                                                 clocks = <&usb>;
 204                                         };
 205
 206                                         pck0: pck0 {
 207                                                 #clock-cells = <0>;
 208                                                 reg = <8>;
 209                                                 clocks = <&prog0>;
 210                                         };
 211
 212                                         pck1: pck1 {
 213                                                 #clock-cells = <0>;
 214                                                 reg = <9>;
 215                                                 clocks = <&prog1>;
 216                                         };
 217
 218                                         pck2: pck2 {
 219                                                 #clock-cells = <0>;
 220                                                 reg = <10>;
 221                                                 clocks = <&prog2>;
 222                                         };
 223
 224                                         pck3: pck3 {
 225                                                 #clock-cells = <0>;
 226                                                 reg = <11>;
 227                                                 clocks = <&prog3>;
 228                                         };
 229                                 };
 230
 231                                 periphck {
 232                                         compatible = "atmel,at91rm9200-clk-peripheral";
 233                                         #address-cells = <1>;
 234                                         #size-cells = <0>;
 235                                         clocks = <&mck>;
 236
 237                                         pioA_clk: pioA_clk {
 238                                                 #clock-cells = <0>;
 239                                                 reg = <2>;
 240                                         };
 241
 242                                         pioB_clk: pioB_clk {
 243                                                 #clock-cells = <0>;
 244                                                 reg = <3>;
 245                                         };
 246
 247                                         pioCDE_clk: pioCDE_clk {
 248                                                 #clock-cells = <0>;
 249                                                 reg = <4>;
 250                                         };
 251
 252                                         usart0_clk: usart0_clk {
 253                                                 #clock-cells = <0>;
 254                                                 reg = <7>;
 255                                         };
 256
 257                                         usart1_clk: usart1_clk {
 258                                                 #clock-cells = <0>;
 259                                                 reg = <8>;
 260                                         };
 261
 262                                         usart2_clk: usart2_clk {
 263                                                 #clock-cells = <0>;
 264                                                 reg = <9>;
 265                                         };
 266
 267                                         mci0_clk: mci0_clk {
 268                                                 #clock-cells = <0>;
 269                                                 reg = <10>;
 270                                         };
 271
 272                                         mci1_clk: mci1_clk {
 273                                                 #clock-cells = <0>;
 274                                                 reg = <11>;
 275                                         };
 276
 277                                         can_clk: can_clk {
 278                                                 #clock-cells = <0>;
 279                                                 reg = <12>;
 280                                         };
 281
 282                                         twi0_clk: twi0_clk {
 283                                                 #clock-cells = <0>;
 284                                                 reg = <13>;
 285                                         };
 286
 287                                         spi0_clk: spi0_clk {
 288                                                 #clock-cells = <0>;
 289                                                 reg = <14>;
 290                                         };
 291
 292                                         spi1_clk: spi1_clk {
 293                                                 #clock-cells = <0>;
 294                                                 reg = <15>;
 295                                         };
 296
 297                                         ssc0_clk: ssc0_clk {
 298                                                 #clock-cells = <0>;
 299                                                 reg = <16>;
 300                                         };
 301
 302                                         ssc1_clk: ssc1_clk {
 303                                                 #clock-cells = <0>;
 304                                                 reg = <17>;
 305                                         };
 306
 307                                         ac97_clk: ac97_clk {
 308                                                 #clock-cells = <0>;
 309                                                 reg = <18>;
 310                                         };
 311
 312                                         tcb_clk: tcb_clk {
 313                                                 #clock-cells = <0>;
 314                                                 reg = <19>;
 315                                         };
 316
 317                                         pwm_clk: pwm_clk {
 318                                                 #clock-cells = <0>;
 319                                                 reg = <20>;
 320                                         };
 321
 322                                         macb0_clk: macb0_clk {
 323                                                 #clock-cells = <0>;
 324                                                 reg = <21>;
 325                                         };
 326
 327                                         g2de_clk: g2de_clk {
 328                                                 #clock-cells = <0>;
 329                                                 reg = <23>;
 330                                         };
 331
 332                                         udc_clk: udc_clk {
 333                                                 #clock-cells = <0>;
 334                                                 reg = <24>;
 335                                         };
 336
 337                                         isi_clk: isi_clk {
 338                                                 #clock-cells = <0>;
 339                                                 reg = <25>;
 340                                         };
 341
 342                                         lcd_clk: lcd_clk {
 343                                                 #clock-cells = <0>;
 344                                                 reg = <26>;
 345                                         };
 346
 347                                         dma_clk: dma_clk {
 348                                                 #clock-cells = <0>;
 349                                                 reg = <27>;
 350                                         };
 351
 352                                         ohci_clk: ohci_clk {
 353                                                 #clock-cells = <0>;
 354                                                 reg = <29>;
 355                                         };
 356                                 };
 357                         };
 358
 359                         ramc0: ramc@ffffe200 {
 360                                 compatible = "atmel,at91sam9260-sdramc";
 361                                 reg = <0xffffe200 0x200>;
 362                         };
 363
 364                         ramc1: ramc@ffffe800 {
 365                                 compatible = "atmel,at91sam9260-sdramc";
 366                                 reg = <0xffffe800 0x200>;
 367                         };
 368
 369                         pit: timer@fffffd30 {
 370                                 compatible = "atmel,at91sam9260-pit";
 371                                 reg = <0xfffffd30 0xf>;
 372                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 373                                 clocks = <&mck>;
 374                         };
 375
 376                         tcb0: timer@fff7c000 {
 377                                 compatible = "atmel,at91rm9200-tcb";
 378                                 reg = <0xfff7c000 0x100>;
 379                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 380                                 clocks = <&tcb_clk>;
 381                                 clock-names = "t0_clk";
 382                         };
 383
 384                         rstc@fffffd00 {
 385                                 compatible = "atmel,at91sam9260-rstc";
 386                                 reg = <0xfffffd00 0x10>;
 387                         };
 388
 389                         shdwc@fffffd10 {
 390                                 compatible = "atmel,at91sam9260-shdwc";
 391                                 reg = <0xfffffd10 0x10>;
 392                         };
 393
 394                         pinctrl@fffff200 {
 395                                 #address-cells = <1>;
 396                                 #size-cells = <1>;
 397                                 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
 398                                 ranges = <0xfffff200 0xfffff200 0xa00>;
 399
 400                                 atmel,mux-mask = <
 401                                       /*    A         B     */
 402                                        0xfffffffb 0xffffe07f  /* pioA */
 403                                        0x0007ffff 0x39072fff  /* pioB */
 404                                        0xffffffff 0x3ffffff8  /* pioC */
 405                                        0xfffffbff 0xffffffff  /* pioD */
 406                                        0xffe00fff 0xfbfcff00  /* pioE */
 407                                       >;
 408
 409                                 /* shared pinctrl settings */
 410                                 dbgu {
 411                                         pinctrl_dbgu: dbgu-0 {
 412                                                 atmel,pins =
 413                                                         <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC30 periph A */
 414                                                          AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PC31 periph with pullup */
 415                                         };
 416                                 };
 417
 418                                 usart0 {
 419                                         pinctrl_usart0: usart0-0 {
 420                                                 atmel,pins =
 421                                                         <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA26 periph A with pullup */
 422                                                          AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */
 423                                         };
 424
 425                                         pinctrl_usart0_rts: usart0_rts-0 {
 426                                                 atmel,pins =
 427                                                         <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */
 428                                         };
 429
 430                                         pinctrl_usart0_cts: usart0_cts-0 {
 431                                                 atmel,pins =
 432                                                         <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */
 433                                         };
 434                                 };
 435
 436                                 usart1 {
 437                                         pinctrl_usart1: usart1-0 {
 438                                                 atmel,pins =
 439                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */
 440                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD1 periph A */
 441                                         };
 442
 443                                         pinctrl_usart1_rts: usart1_rts-0 {
 444                                                 atmel,pins =
 445                                                         <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD7 periph B */
 446                                         };
 447
 448                                         pinctrl_usart1_cts: usart1_cts-0 {
 449                                                 atmel,pins =
 450                                                         <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD8 periph B */
 451                                         };
 452                                 };
 453
 454                                 usart2 {
 455                                         pinctrl_usart2: usart2-0 {
 456                                                 atmel,pins =
 457                                                         <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */
 458                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD3 periph A */
 459                                         };
 460
 461                                         pinctrl_usart2_rts: usart2_rts-0 {
 462                                                 atmel,pins =
 463                                                         <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD5 periph B */
 464                                         };
 465
 466                                         pinctrl_usart2_cts: usart2_cts-0 {
 467                                                 atmel,pins =
 468                                                         <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD6 periph B */
 469                                         };
 470                                 };
 471
 472                                 nand {
 473                                         pinctrl_nand: nand-0 {
 474                                                 atmel,pins =
 475                                                         <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP     /* PA22 gpio RDY pin pull_up*/
 476                                                          AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PD15 gpio enable pin pull_up */
 477                                         };
 478                                 };
 479
 480                                 macb {
 481                                         pinctrl_macb_rmii: macb_rmii-0 {
 482                                                 atmel,pins =
 483                                                         <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC25 periph B */
 484                                                          AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE21 periph A */
 485                                                          AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE23 periph A */
 486                                                          AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE24 periph A */
 487                                                          AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE25 periph A */
 488                                                          AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE26 periph A */
 489                                                          AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE27 periph A */
 490                                                          AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE28 periph A */
 491                                                          AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE29 periph A */
 492                                                          AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */
 493                                         };
 494
 495                                         pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
 496                                                 atmel,pins =
 497                                                         <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC20 periph B */
 498                                                          AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC21 periph B */
 499                                                          AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC22 periph B */
 500                                                          AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC23 periph B */
 501                                                          AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC24 periph B */
 502                                                          AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC25 periph B */
 503                                                          AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC27 periph B */
 504                                                          AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */
 505                                         };
 506                                 };
 507
 508                                 mmc0 {
 509                                         pinctrl_mmc0_clk: mmc0_clk-0 {
 510                                                 atmel,pins =
 511                                                         <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */
 512                                         };
 513
 514                                         pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
 515                                                 atmel,pins =
 516                                                         <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
 517                                                          AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA0 periph A with pullup */
 518                                         };
 519
 520                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 521                                                 atmel,pins =
 522                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */
 523                                                          AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */
 524                                                          AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA5 periph A with pullup */
 525                                         };
 526
 527                                         pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
 528                                                 atmel,pins =
 529                                                         <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
 530                                                          AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA17 periph A with pullup */
 531                                         };
 532
 533                                         pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
 534                                                 atmel,pins =
 535                                                         <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
 536                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
 537                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
 538                                         };
 539                                 };
 540
 541                                 mmc1 {
 542                                         pinctrl_mmc1_clk: mmc1_clk-0 {
 543                                                 atmel,pins =
 544                                                         <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA6 periph A */
 545                                         };
 546
 547                                         pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
 548                                                 atmel,pins =
 549                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
 550                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA8 periph A with pullup */
 551                                         };
 552
 553                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 554                                                 atmel,pins =
 555                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
 556                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA10 periph A with pullup */
 557                                                          AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA11 periph A with pullup */
 558                                         };
 559
 560                                         pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
 561                                                 atmel,pins =
 562                                                         <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA21 periph A with pullup */
 563                                                          AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA22 periph A with pullup */
 564                                         };
 565
 566                                         pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
 567                                                 atmel,pins =
 568                                                         <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA23 periph A with pullup */
 569                                                          AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA24 periph A with pullup */
 570                                                          AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA25 periph A with pullup */
 571                                         };
 572                                 };
 573
 574                                 ssc0 {
 575                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 576                                                 atmel,pins =
 577                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB0 periph B */
 578                                                          AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB1 periph B */
 579                                                          AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
 580                                         };
 581
 582                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 583                                                 atmel,pins =
 584                                                         <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB3 periph B */
 585                                                          AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B */
 586                                                          AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B */
 587                                         };
 588                                 };
 589
 590                                 ssc1 {
 591                                         pinctrl_ssc1_tx: ssc1_tx-0 {
 592                                                 atmel,pins =
 593                                                         <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB6 periph A */
 594                                                          AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB7 periph A */
 595                                                          AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB8 periph A */
 596                                         };
 597
 598                                         pinctrl_ssc1_rx: ssc1_rx-0 {
 599                                                 atmel,pins =
 600                                                         <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB9 periph A */
 601                                                          AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB10 periph A */
 602                                                          AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
 603                                         };
 604                                 };
 605
 606                                 spi0 {
 607                                         pinctrl_spi0: spi0-0 {
 608                                                 atmel,pins =
 609                                                         <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA0 periph B SPI0_MISO pin */
 610                                                          AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA1 periph B SPI0_MOSI pin */
 611                                                          AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PA2 periph B SPI0_SPCK pin */
 612                                         };
 613                                 };
 614
 615                                 spi1 {
 616                                         pinctrl_spi1: spi1-0 {
 617                                                 atmel,pins =
 618                                                         <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB12 periph A SPI1_MISO pin */
 619                                                          AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB13 periph A SPI1_MOSI pin */
 620                                                          AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */
 621                                         };
 622                                 };
 623
 624                                 tcb0 {
 625                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 626                                                 atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 627                                         };
 628
 629                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 630                                                 atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 631                                         };
 632
 633                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 634                                                 atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 635                                         };
 636
 637                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 638                                                 atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 639                                         };
 640
 641                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 642                                                 atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 643                                         };
 644
 645                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 646                                                 atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 647                                         };
 648
 649                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 650                                                 atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 651                                         };
 652
 653                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 654                                                 atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 655                                         };
 656
 657                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 658                                                 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 659                                         };
 660                                 };
 661
 662                                 fb {
 663                                         pinctrl_fb: fb-0 {
 664                                                 atmel,pins =
 665                                                         <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC1 periph A */
 666                                                          AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC2 periph A */
 667                                                          AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC3 periph A */
 668                                                          AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB9 periph B */
 669                                                          AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC6 periph A */
 670                                                          AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC7 periph A */
 671                                                          AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC8 periph A */
 672                                                          AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC9 periph A */
 673                                                          AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC10 periph A */
 674                                                          AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC11 periph A */
 675                                                          AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC14 periph A */
 676                                                          AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC15 periph A */
 677                                                          AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC16 periph A */
 678                                                          AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC12 periph B */
 679                                                          AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC18 periph A */
 680                                                          AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC19 periph A */
 681                                                          AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC22 periph A */
 682                                                          AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC23 periph A */
 683                                                          AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC24 periph A */
 684                                                          AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC17 periph B */
 685                                                          AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC26 periph A */
 686                                                          AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */
 687                                         };
 688                                 };
 689
 690                                 can {
 691                                         pinctrl_can_rx_tx: can_rx_tx {
 692                                                 atmel,pins =
 693                                                         <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* CANRX, conflicts with IRQ0 */
 694                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* CANTX, conflicts with PCK0 */
 695                                         };
 696                                 };
 697
 698                                 ac97 {
 699                                         pinctrl_ac97: ac97-0 {
 700                                                 atmel,pins =
 701                                                         <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB12 periph A AC97FS pin */
 702                                                          AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB13 periph A AC97CK pin */
 703                                                          AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB14 periph A AC97TX pin */
 704                                                          AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB14 periph A AC97RX pin */
 705                                         };
 706                                 };
 707
 708                                 pioA: gpio@fffff200 {
 709                                         compatible = "atmel,at91rm9200-gpio";
 710                                         reg = <0xfffff200 0x200>;
 711                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 712                                         #gpio-cells = <2>;
 713                                         gpio-controller;
 714                                         interrupt-controller;
 715                                         #interrupt-cells = <2>;
 716                                         clocks = <&pioA_clk>;
 717                                 };
 718
 719                                 pioB: gpio@fffff400 {
 720                                         compatible = "atmel,at91rm9200-gpio";
 721                                         reg = <0xfffff400 0x200>;
 722                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 723                                         #gpio-cells = <2>;
 724                                         gpio-controller;
 725                                         interrupt-controller;
 726                                         #interrupt-cells = <2>;
 727                                         clocks = <&pioB_clk>;
 728                                 };
 729
 730                                 pioC: gpio@fffff600 {
 731                                         compatible = "atmel,at91rm9200-gpio";
 732                                         reg = <0xfffff600 0x200>;
 733                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 734                                         #gpio-cells = <2>;
 735                                         gpio-controller;
 736                                         interrupt-controller;
 737                                         #interrupt-cells = <2>;
 738                                         clocks = <&pioCDE_clk>;
 739                                 };
 740
 741                                 pioD: gpio@fffff800 {
 742                                         compatible = "atmel,at91rm9200-gpio";
 743                                         reg = <0xfffff800 0x200>;
 744                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 745                                         #gpio-cells = <2>;
 746                                         gpio-controller;
 747                                         interrupt-controller;
 748                                         #interrupt-cells = <2>;
 749                                         clocks = <&pioCDE_clk>;
 750                                 };
 751
 752                                 pioE: gpio@fffffa00 {
 753                                         compatible = "atmel,at91rm9200-gpio";
 754                                         reg = <0xfffffa00 0x200>;
 755                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 756                                         #gpio-cells = <2>;
 757                                         gpio-controller;
 758                                         interrupt-controller;
 759                                         #interrupt-cells = <2>;
 760                                         clocks = <&pioCDE_clk>;
 761                                 };
 762                         };
 763
 764                         dbgu: serial@ffffee00 {
 765                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 766                                 reg = <0xffffee00 0x200>;
 767                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 768                                 pinctrl-names = "default";
 769                                 pinctrl-0 = <&pinctrl_dbgu>;
 770                                 clocks = <&mck>;
 771                                 clock-names = "usart";
 772                                 status = "disabled";
 773                         };
 774
 775                         usart0: serial@fff8c000 {
 776                                 compatible = "atmel,at91sam9260-usart";
 777                                 reg = <0xfff8c000 0x200>;
 778                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 779                                 atmel,use-dma-rx;
 780                                 atmel,use-dma-tx;
 781                                 pinctrl-names = "default";
 782                                 pinctrl-0 = <&pinctrl_usart0>;
 783                                 clocks = <&usart0_clk>;
 784                                 clock-names = "usart";
 785                                 status = "disabled";
 786                         };
 787
 788                         usart1: serial@fff90000 {
 789                                 compatible = "atmel,at91sam9260-usart";
 790                                 reg = <0xfff90000 0x200>;
 791                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 792                                 atmel,use-dma-rx;
 793                                 atmel,use-dma-tx;
 794                                 pinctrl-names = "default";
 795                                 pinctrl-0 = <&pinctrl_usart1>;
 796                                 clocks = <&usart1_clk>;
 797                                 clock-names = "usart";
 798                                 status = "disabled";
 799                         };
 800
 801                         usart2: serial@fff94000 {
 802                                 compatible = "atmel,at91sam9260-usart";
 803                                 reg = <0xfff94000 0x200>;
 804                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 805                                 atmel,use-dma-rx;
 806                                 atmel,use-dma-tx;
 807                                 pinctrl-names = "default";
 808                                 pinctrl-0 = <&pinctrl_usart2>;
 809                                 clocks = <&usart2_clk>;
 810                                 clock-names = "usart";
 811                                 status = "disabled";
 812                         };
 813
 814                         ssc0: ssc@fff98000 {
 815                                 compatible = "atmel,at91rm9200-ssc";
 816                                 reg = <0xfff98000 0x4000>;
 817                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 818                                 pinctrl-names = "default";
 819                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 820                                 clocks = <&ssc0_clk>;
 821                                 clock-names = "pclk";
 822                                 status = "disabled";
 823                         };
 824
 825                         ssc1: ssc@fff9c000 {
 826                                 compatible = "atmel,at91rm9200-ssc";
 827                                 reg = <0xfff9c000 0x4000>;
 828                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 829                                 pinctrl-names = "default";
 830                                 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 831                                 clocks = <&ssc1_clk>;
 832                                 clock-names = "pclk";
 833                                 status = "disabled";
 834                         };
 835
 836                         ac97: sound@fffa0000 {
 837                                 compatible = "atmel,at91sam9263-ac97c";
 838                                 reg = <0xfffa0000 0x4000>;
 839                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
 840                                 pinctrl-names = "default";
 841                                 pinctrl-0 = <&pinctrl_ac97>;
 842                                 clocks = <&ac97_clk>;
 843                                 clock-names = "ac97_clk";
 844                                 status = "disabled";
 845                         };
 846
 847                         macb0: ethernet@fffbc000 {
 848                                 compatible = "cdns,at91sam9260-macb", "cdns,macb";
 849                                 reg = <0xfffbc000 0x100>;
 850                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 851                                 pinctrl-names = "default";
 852                                 pinctrl-0 = <&pinctrl_macb_rmii>;
 853                                 clocks = <&macb0_clk>, <&macb0_clk>;
 854                                 clock-names = "hclk", "pclk";
 855                                 status = "disabled";
 856                         };
 857
 858                         usb1: gadget@fff78000 {
 859                                 compatible = "atmel,at91sam9263-udc";
 860                                 reg = <0xfff78000 0x4000>;
 861                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
 862                                 clocks = <&udc_clk>, <&udpck>;
 863                                 clock-names = "pclk", "hclk";
 864                                 status = "disabled";
 865                         };
 866
 867                         i2c0: i2c@fff88000 {
 868                                 compatible = "atmel,at91sam9260-i2c";
 869                                 reg = <0xfff88000 0x100>;
 870                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 871                                 #address-cells = <1>;
 872                                 #size-cells = <0>;
 873                                 clocks = <&twi0_clk>;
 874                                 status = "disabled";
 875                         };
 876
 877                         mmc0: mmc@fff80000 {
 878                                 compatible = "atmel,hsmci";
 879                                 reg = <0xfff80000 0x600>;
 880                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
 881                                 pinctrl-names = "default";
 882                                 #address-cells = <1>;
 883                                 #size-cells = <0>;
 884                                 clocks = <&mci0_clk>;
 885                                 clock-names = "mci_clk";
 886                                 status = "disabled";
 887                         };
 888
 889                         mmc1: mmc@fff84000 {
 890                                 compatible = "atmel,hsmci";
 891                                 reg = <0xfff84000 0x600>;
 892                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
 893                                 pinctrl-names = "default";
 894                                 #address-cells = <1>;
 895                                 #size-cells = <0>;
 896                                 clocks = <&mci1_clk>;
 897                                 clock-names = "mci_clk";
 898                                 status = "disabled";
 899                         };
 900
 901                         watchdog@fffffd40 {
 902                                 compatible = "atmel,at91sam9260-wdt";
 903                                 reg = <0xfffffd40 0x10>;
 904                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 905                                 atmel,watchdog-type = "hardware";
 906                                 atmel,reset-type = "all";
 907                                 atmel,dbg-halt;
 908                                 status = "disabled";
 909                         };
 910
 911                         spi0: spi@fffa4000 {
 912                                 #address-cells = <1>;
 913                                 #size-cells = <0>;
 914                                 compatible = "atmel,at91rm9200-spi";
 915                                 reg = <0xfffa4000 0x200>;
 916                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 917                                 pinctrl-names = "default";
 918                                 pinctrl-0 = <&pinctrl_spi0>;
 919                                 clocks = <&spi0_clk>;
 920                                 clock-names = "spi_clk";
 921                                 status = "disabled";
 922                         };
 923
 924                         spi1: spi@fffa8000 {
 925                                 #address-cells = <1>;
 926                                 #size-cells = <0>;
 927                                 compatible = "atmel,at91rm9200-spi";
 928                                 reg = <0xfffa8000 0x200>;
 929                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
 930                                 pinctrl-names = "default";
 931                                 pinctrl-0 = <&pinctrl_spi1>;
 932                                 clocks = <&spi1_clk>;
 933                                 clock-names = "spi_clk";
 934                                 status = "disabled";
 935                         };
 936
 937                         pwm0: pwm@fffb8000 {
 938                                 compatible = "atmel,at91sam9rl-pwm";
 939                                 reg = <0xfffb8000 0x300>;
 940                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
 941                                 #pwm-cells = <3>;
 942                                 clocks = <&pwm_clk>;
 943                                 clock-names = "pwm_clk";
 944                                 status = "disabled";
 945                         };
 946
 947                         can: can@fffac000 {
 948                                 compatible = "atmel,at91sam9263-can";
 949                                 reg = <0xfffac000 0x300>;
 950                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 951                                 pinctrl-names = "default";
 952                                 pinctrl-0 = <&pinctrl_can_rx_tx>;
 953                                 clocks = <&can_clk>;
 954                                 clock-names = "can_clk";
 955                         };
 956
 957                         rtc@fffffd20 {
 958                                 compatible = "atmel,at91sam9260-rtt";
 959                                 reg = <0xfffffd20 0x10>;
 960                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 961                                 clocks = <&slow_xtal>;
 962                                 status = "disabled";
 963                         };
 964
 965                         rtc@fffffd50 {
 966                                 compatible = "atmel,at91sam9260-rtt";
 967                                 reg = <0xfffffd50 0x10>;
 968                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 969                                 clocks = <&slow_xtal>;
 970                                 status = "disabled";
 971                         };
 972
 973                         gpbr: syscon@fffffd60 {
 974                                 compatible = "atmel,at91sam9260-gpbr", "syscon";
 975                                 reg = <0xfffffd60 0x50>;
 976                                 status = "disabled";
 977                         };
 978                 };
 979
 980                 fb0: fb@0x00700000 {
 981                         compatible = "atmel,at91sam9263-lcdc";
 982                         reg = <0x00700000 0x1000>;
 983                         interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
 984                         pinctrl-names = "default";
 985                         pinctrl-0 = <&pinctrl_fb>;
 986                         clocks = <&lcd_clk>, <&lcd_clk>;
 987                         clock-names = "lcdc_clk", "hclk";
 988                         status = "disabled";
 989                 };
 990
 991                 nand0: nand@40000000 {
 992                         compatible = "atmel,at91rm9200-nand";
 993                         #address-cells = <1>;
 994                         #size-cells = <1>;
 995                         reg = <0x40000000 0x10000000
 996                                0xffffe000 0x200
 997                               >;
 998                         atmel,nand-addr-offset = <21>;
 999                         atmel,nand-cmd-offset = <22>;
1000                         pinctrl-names = "default";
1001                         pinctrl-0 = <&pinctrl_nand>;
1002                         gpios = <&pioA 22 GPIO_ACTIVE_HIGH
1003                                  &pioD 15 GPIO_ACTIVE_HIGH
1004                                  0
1005                                 >;
1006                         status = "disabled";
1007                 };
1008
1009                 usb0: ohci@00a00000 {
1010                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1011                         reg = <0x00a00000 0x100000>;
1012                         interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
1013                         clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
1014                         clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
1015                         status = "disabled";
1016                 };
1017         };
1018
1019         i2c@0 {
1020                 compatible = "i2c-gpio";
1021                 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
1022                          &pioB 5 GPIO_ACTIVE_HIGH /* scl */
1023                         >;
1024                 i2c-gpio,sda-open-drain;
1025                 i2c-gpio,scl-open-drain;
1026                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1027                 #address-cells = <1>;
1028                 #size-cells = <0>;
1029                 status = "disabled";
1030         };
1031 };