arch/arm/boot/dts/at91sam9260.dtsi

   1 /*
   2  * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
   3  *
   4  *  Copyright (C) 2011 Atmel,
   5  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
   6  *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   7  *
   8  * Licensed under GPLv2 or later.
   9  */
  10
  11 #include "skeleton.dtsi"
  12 #include <dt-bindings/pinctrl/at91.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/clock/at91.h>
  16
  17 / {
  18         model = "Atmel AT91SAM9260 family SoC";
  19         compatible = "atmel,at91sam9260";
  20         interrupt-parent = <&aic>;
  21
  22         aliases {
  23                 serial0 = &dbgu;
  24                 serial1 = &usart0;
  25                 serial2 = &usart1;
  26                 serial3 = &usart2;
  27                 serial4 = &usart3;
  28                 serial5 = &uart0;
  29                 serial6 = &uart1;
  30                 gpio0 = &pioA;
  31                 gpio1 = &pioB;
  32                 gpio2 = &pioC;
  33                 tcb0 = &tcb0;
  34                 tcb1 = &tcb1;
  35                 i2c0 = &i2c0;
  36                 ssc0 = &ssc0;
  37         };
  38         cpus {
  39                 #address-cells = <0>;
  40                 #size-cells = <0>;
  41
  42                 cpu {
  43                         compatible = "arm,arm926ej-s";
  44                         device_type = "cpu";
  45                 };
  46         };
  47
  48         memory {
  49                 reg = <0x20000000 0x04000000>;
  50         };
  51
  52         clocks {
  53                 slow_xtal: slow_xtal {
  54                         compatible = "fixed-clock";
  55                         #clock-cells = <0>;
  56                         clock-frequency = <0>;
  57                 };
  58
  59                 main_xtal: main_xtal {
  60                         compatible = "fixed-clock";
  61                         #clock-cells = <0>;
  62                         clock-frequency = <0>;
  63                 };
  64
  65                 adc_op_clk: adc_op_clk{
  66                         compatible = "fixed-clock";
  67                         #clock-cells = <0>;
  68                         clock-frequency = <5000000>;
  69                 };
  70         };
  71
  72         sram0: sram@002ff000 {
  73                 compatible = "mmio-sram";
  74                 reg = <0x002ff000 0x2000>;
  75         };
  76
  77         ahb {
  78                 compatible = "simple-bus";
  79                 #address-cells = <1>;
  80                 #size-cells = <1>;
  81                 ranges;
  82
  83                 apb {
  84                         compatible = "simple-bus";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87                         ranges;
  88
  89                         aic: interrupt-controller@fffff000 {
  90                                 #interrupt-cells = <3>;
  91                                 compatible = "atmel,at91rm9200-aic";
  92                                 interrupt-controller;
  93                                 reg = <0xfffff000 0x200>;
  94                                 atmel,external-irqs = <29 30 31>;
  95                         };
  96
  97                         ramc0: ramc@ffffea00 {
  98                                 compatible = "atmel,at91sam9260-sdramc";
  99                                 reg = <0xffffea00 0x200>;
 100                         };
 101
 102                         smc: smc@ffffec00 {
 103                                 compatible = "atmel,at91sam9260-smc", "syscon";
 104                                 reg = <0xffffec00 0x200>;
 105                         };
 106
 107                         matrix: matrix@ffffee00 {
 108                                 compatible = "atmel,at91sam9260-matrix", "syscon";
 109                                 reg = <0xffffee00 0x200>;
 110                         };
 111
 112                         pmc: pmc@fffffc00 {
 113                                 compatible = "atmel,at91sam9260-pmc", "syscon";
 114                                 reg = <0xfffffc00 0x100>;
 115                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 116                                 interrupt-controller;
 117                                 #address-cells = <1>;
 118                                 #size-cells = <0>;
 119                                 #interrupt-cells = <1>;
 120
 121                                 main_osc: main_osc {
 122                                         compatible = "atmel,at91rm9200-clk-main-osc";
 123                                         #clock-cells = <0>;
 124                                         interrupts-extended = <&pmc AT91_PMC_MOSCS>;
 125                                         clocks = <&main_xtal>;
 126                                 };
 127
 128                                 main: mainck {
 129                                         compatible = "atmel,at91rm9200-clk-main";
 130                                         #clock-cells = <0>;
 131                                         clocks = <&main_osc>;
 132                                 };
 133
 134                                 slow_rc_osc: slow_rc_osc {
 135                                         compatible = "fixed-clock";
 136                                         #clock-cells = <0>;
 137                                         clock-frequency = <32768>;
 138                                         clock-accuracy = <50000000>;
 139                                 };
 140
 141                                 clk32k: slck {
 142                                         compatible = "atmel,at91sam9260-clk-slow";
 143                                         #clock-cells = <0>;
 144                                         clocks = <&slow_rc_osc>, <&slow_xtal>;
 145                                 };
 146
 147                                 plla: pllack {
 148                                         compatible = "atmel,at91rm9200-clk-pll";
 149                                         #clock-cells = <0>;
 150                                         interrupts-extended = <&pmc AT91_PMC_LOCKA>;
 151                                         clocks = <&main>;
 152                                         reg = <0>;
 153                                         atmel,clk-input-range = <1000000 32000000>;
 154                                         #atmel,pll-clk-output-range-cells = <4>;
 155                                         atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
 156                                                                 <150000000 240000000 2 1>;
 157                                 };
 158
 159                                 pllb: pllbck {
 160                                         compatible = "atmel,at91rm9200-clk-pll";
 161                                         #clock-cells = <0>;
 162                                         interrupts-extended = <&pmc AT91_PMC_LOCKB>;
 163                                         clocks = <&main>;
 164                                         reg = <1>;
 165                                         atmel,clk-input-range = <1000000 5000000>;
 166                                         #atmel,pll-clk-output-range-cells = <4>;
 167                                         atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
 168                                 };
 169
 170                                 mck: masterck {
 171                                         compatible = "atmel,at91rm9200-clk-master";
 172                                         #clock-cells = <0>;
 173                                         interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
 174                                         clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
 175                                         atmel,clk-output-range = <0 105000000>;
 176                                         atmel,clk-divisors = <1 2 4 0>;
 177                                 };
 178
 179                                 usb: usbck {
 180                                         compatible = "atmel,at91rm9200-clk-usb";
 181                                         #clock-cells = <0>;
 182                                         atmel,clk-divisors = <1 2 4 0>;
 183                                         clocks = <&pllb>;
 184                                 };
 185
 186                                 prog: progck {
 187                                         compatible = "atmel,at91rm9200-clk-programmable";
 188                                         #address-cells = <1>;
 189                                         #size-cells = <0>;
 190                                         interrupt-parent = <&pmc>;
 191                                         clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
 192
 193                                         prog0: prog0 {
 194                                                 #clock-cells = <0>;
 195                                                 reg = <0>;
 196                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
 197                                         };
 198
 199                                         prog1: prog1 {
 200                                                 #clock-cells = <0>;
 201                                                 reg = <1>;
 202                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
 203                                         };
 204                                 };
 205
 206                                 systemck {
 207                                         compatible = "atmel,at91rm9200-clk-system";
 208                                         #address-cells = <1>;
 209                                         #size-cells = <0>;
 210
 211                                         uhpck: uhpck {
 212                                                 #clock-cells = <0>;
 213                                                 reg = <6>;
 214                                                 clocks = <&usb>;
 215                                         };
 216
 217                                         udpck: udpck {
 218                                                 #clock-cells = <0>;
 219                                                 reg = <7>;
 220                                                 clocks = <&usb>;
 221                                         };
 222
 223                                         pck0: pck0 {
 224                                                 #clock-cells = <0>;
 225                                                 reg = <8>;
 226                                                 clocks = <&prog0>;
 227                                         };
 228
 229                                         pck1: pck1 {
 230                                                 #clock-cells = <0>;
 231                                                 reg = <9>;
 232                                                 clocks = <&prog1>;
 233                                         };
 234                                 };
 235
 236                                 periphck {
 237                                         compatible = "atmel,at91rm9200-clk-peripheral";
 238                                         #address-cells = <1>;
 239                                         #size-cells = <0>;
 240                                         clocks = <&mck>;
 241
 242                                         pioA_clk: pioA_clk {
 243                                                 #clock-cells = <0>;
 244                                                 reg = <2>;
 245                                         };
 246
 247                                         pioB_clk: pioB_clk {
 248                                                 #clock-cells = <0>;
 249                                                 reg = <3>;
 250                                         };
 251
 252                                         pioC_clk: pioC_clk {
 253                                                 #clock-cells = <0>;
 254                                                 reg = <4>;
 255                                         };
 256
 257                                         adc_clk: adc_clk {
 258                                                 #clock-cells = <0>;
 259                                                 reg = <5>;
 260                                         };
 261
 262                                         usart0_clk: usart0_clk {
 263                                                 #clock-cells = <0>;
 264                                                 reg = <6>;
 265                                         };
 266
 267                                         usart1_clk: usart1_clk {
 268                                                 #clock-cells = <0>;
 269                                                 reg = <7>;
 270                                         };
 271
 272                                         usart2_clk: usart2_clk {
 273                                                 #clock-cells = <0>;
 274                                                 reg = <8>;
 275                                         };
 276
 277                                         mci0_clk: mci0_clk {
 278                                                 #clock-cells = <0>;
 279                                                 reg = <9>;
 280                                         };
 281
 282                                         udc_clk: udc_clk {
 283                                                 #clock-cells = <0>;
 284                                                 reg = <10>;
 285                                         };
 286
 287                                         twi0_clk: twi0_clk {
 288                                                 reg = <11>;
 289                                                 #clock-cells = <0>;
 290                                         };
 291
 292                                         spi0_clk: spi0_clk {
 293                                                 #clock-cells = <0>;
 294                                                 reg = <12>;
 295                                         };
 296
 297                                         spi1_clk: spi1_clk {
 298                                                 #clock-cells = <0>;
 299                                                 reg = <13>;
 300                                         };
 301
 302                                         ssc0_clk: ssc0_clk {
 303                                                 #clock-cells = <0>;
 304                                                 reg = <14>;
 305                                         };
 306
 307                                         tc0_clk: tc0_clk {
 308                                                 #clock-cells = <0>;
 309                                                 reg = <17>;
 310                                         };
 311
 312                                         tc1_clk: tc1_clk {
 313                                                 #clock-cells = <0>;
 314                                                 reg = <18>;
 315                                         };
 316
 317                                         tc2_clk: tc2_clk {
 318                                                 #clock-cells = <0>;
 319                                                 reg = <19>;
 320                                         };
 321
 322                                         ohci_clk: ohci_clk {
 323                                                 #clock-cells = <0>;
 324                                                 reg = <20>;
 325                                         };
 326
 327                                         macb0_clk: macb0_clk {
 328                                                 #clock-cells = <0>;
 329                                                 reg = <21>;
 330                                         };
 331
 332                                         isi_clk: isi_clk {
 333                                                 #clock-cells = <0>;
 334                                                 reg = <22>;
 335                                         };
 336
 337                                         usart3_clk: usart3_clk {
 338                                                 #clock-cells = <0>;
 339                                                 reg = <23>;
 340                                         };
 341
 342                                         uart0_clk: uart0_clk {
 343                                                 #clock-cells = <0>;
 344                                                 reg = <24>;
 345                                         };
 346
 347                                         uart1_clk: uart1_clk {
 348                                                 #clock-cells = <0>;
 349                                                 reg = <25>;
 350                                         };
 351
 352                                         tc3_clk: tc3_clk {
 353                                                 #clock-cells = <0>;
 354                                                 reg = <26>;
 355                                         };
 356
 357                                         tc4_clk: tc4_clk {
 358                                                 #clock-cells = <0>;
 359                                                 reg = <27>;
 360                                         };
 361
 362                                         tc5_clk: tc5_clk {
 363                                                 #clock-cells = <0>;
 364                                                 reg = <28>;
 365                                         };
 366                                 };
 367                         };
 368
 369                         rstc@fffffd00 {
 370                                 compatible = "atmel,at91sam9260-rstc";
 371                                 reg = <0xfffffd00 0x10>;
 372                                 clocks = <&clk32k>;
 373                         };
 374
 375                         shdwc@fffffd10 {
 376                                 compatible = "atmel,at91sam9260-shdwc";
 377                                 reg = <0xfffffd10 0x10>;
 378                                 clocks = <&clk32k>;
 379                         };
 380
 381                         pit: timer@fffffd30 {
 382                                 compatible = "atmel,at91sam9260-pit";
 383                                 reg = <0xfffffd30 0xf>;
 384                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 385                                 clocks = <&mck>;
 386                         };
 387
 388                         tcb0: timer@fffa0000 {
 389                                 compatible = "atmel,at91rm9200-tcb";
 390                                 reg = <0xfffa0000 0x100>;
 391                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 392                                               18 IRQ_TYPE_LEVEL_HIGH 0
 393                                               19 IRQ_TYPE_LEVEL_HIGH 0>;
 394                                 clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
 395                                 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 396                         };
 397
 398                         tcb1: timer@fffdc000 {
 399                                 compatible = "atmel,at91rm9200-tcb";
 400                                 reg = <0xfffdc000 0x100>;
 401                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
 402                                               27 IRQ_TYPE_LEVEL_HIGH 0
 403                                               28 IRQ_TYPE_LEVEL_HIGH 0>;
 404                                 clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
 405                                 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 406                         };
 407
 408                         pinctrl@fffff400 {
 409                                 #address-cells = <1>;
 410                                 #size-cells = <1>;
 411                                 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
 412                                 ranges = <0xfffff400 0xfffff400 0x600>;
 413
 414                                 atmel,mux-mask = <
 415                                       /*    A         B     */
 416                                        0xffffffff 0xffc00c3b  /* pioA */
 417                                        0xffffffff 0x7fff3ccf  /* pioB */
 418                                        0xffffffff 0x007fffff  /* pioC */
 419                                       >;
 420
 421                                 /* shared pinctrl settings */
 422                                 dbgu {
 423                                         pinctrl_dbgu: dbgu-0 {
 424                                                 atmel,pins =
 425                                                         <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 426                                                          AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 427                                         };
 428                                 };
 429
 430                                 usart0 {
 431                                         pinctrl_usart0: usart0-0 {
 432                                                 atmel,pins =
 433                                                         <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB4 periph A */
 434                                                          AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB5 periph A */
 435                                         };
 436
 437                                         pinctrl_usart0_rts: usart0_rts-0 {
 438                                                 atmel,pins =
 439                                                         <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */
 440                                         };
 441
 442                                         pinctrl_usart0_cts: usart0_cts-0 {
 443                                                 atmel,pins =
 444                                                         <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */
 445                                         };
 446
 447                                         pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
 448                                                 atmel,pins =
 449                                                         <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB24 periph A */
 450                                                          AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */
 451                                         };
 452
 453                                         pinctrl_usart0_dcd: usart0_dcd-0 {
 454                                                 atmel,pins =
 455                                                         <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */
 456                                         };
 457
 458                                         pinctrl_usart0_ri: usart0_ri-0 {
 459                                                 atmel,pins =
 460                                                         <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */
 461                                         };
 462                                 };
 463
 464                                 usart1 {
 465                                         pinctrl_usart1: usart1-0 {
 466                                                 atmel,pins =
 467                                                         <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */
 468                                                          AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB7 periph A */
 469                                         };
 470
 471                                         pinctrl_usart1_rts: usart1_rts-0 {
 472                                                 atmel,pins =
 473                                                         <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */
 474                                         };
 475
 476                                         pinctrl_usart1_cts: usart1_cts-0 {
 477                                                 atmel,pins =
 478                                                         <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */
 479                                         };
 480                                 };
 481
 482                                 usart2 {
 483                                         pinctrl_usart2: usart2-0 {
 484                                                 atmel,pins =
 485                                                         <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */
 486                                                          AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB9 periph A */
 487                                         };
 488
 489                                         pinctrl_usart2_rts: usart2_rts-0 {
 490                                                 atmel,pins =
 491                                                         <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
 492                                         };
 493
 494                                         pinctrl_usart2_cts: usart2_cts-0 {
 495                                                 atmel,pins =
 496                                                         <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA5 periph A */
 497                                         };
 498                                 };
 499
 500                                 usart3 {
 501                                         pinctrl_usart3: usart3-0 {
 502                                                 atmel,pins =
 503                                                         <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB10 periph A with pullup */
 504                                                          AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
 505                                         };
 506
 507                                         pinctrl_usart3_rts: usart3_rts-0 {
 508                                                 atmel,pins =
 509                                                         <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 510                                         };
 511
 512                                         pinctrl_usart3_cts: usart3_cts-0 {
 513                                                 atmel,pins =
 514                                                         <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 515                                         };
 516                                 };
 517
 518                                 uart0 {
 519                                         pinctrl_uart0: uart0-0 {
 520                                                 atmel,pins =
 521                                                         <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA31 periph B with pullup */
 522                                                          AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
 523                                         };
 524                                 };
 525
 526                                 uart1 {
 527                                         pinctrl_uart1: uart1-0 {
 528                                                 atmel,pins =
 529                                                         <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB12 periph A with pullup */
 530                                                          AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */
 531                                         };
 532                                 };
 533
 534                                 nand {
 535                                         pinctrl_nand_rb: nand-rb-0 {
 536                                                 atmel,pins =
 537                                                         <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 538                                         };
 539
 540                                         pinctrl_nand_cs: nand-cs-0 {
 541                                                 atmel,pins =
 542                                                          <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 543                                         };
 544                                 };
 545
 546                                 macb {
 547                                         pinctrl_macb_rmii: macb_rmii-0 {
 548                                                 atmel,pins =
 549                                                         <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A */
 550                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA13 periph A */
 551                                                          AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA14 periph A */
 552                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA15 periph A */
 553                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA16 periph A */
 554                                                          AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 555                                                          AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA18 periph A */
 556                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA19 periph A */
 557                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA20 periph A */
 558                                                          AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */
 559                                         };
 560
 561                                         pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
 562                                                 atmel,pins =
 563                                                         <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B */
 564                                                          AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA23 periph B */
 565                                                          AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
 566                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 567                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA26 periph B */
 568                                                          AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 569                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 570                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 571                                         };
 572
 573                                         pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
 574                                                 atmel,pins =
 575                                                         <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA10 periph B */
 576                                                          AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA11 periph B */
 577                                                          AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B */
 578                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 579                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA26 periph B */
 580                                                          AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 581                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 582                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 583                                         };
 584                                 };
 585
 586                                 mmc0 {
 587                                         pinctrl_mmc0_clk: mmc0_clk-0 {
 588                                                 atmel,pins =
 589                                                         <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA8 periph A */
 590                                         };
 591
 592                                         pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
 593                                                 atmel,pins =
 594                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
 595                                                          AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA6 periph A with pullup */
 596                                         };
 597
 598                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 599                                                 atmel,pins =
 600                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
 601                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA10 periph A with pullup */
 602                                                          AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA11 periph A with pullup */
 603                                         };
 604
 605                                         pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
 606                                                 atmel,pins =
 607                                                         <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */
 608                                                          AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA0 periph B with pullup */
 609                                         };
 610
 611                                         pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
 612                                                 atmel,pins =
 613                                                         <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */
 614                                                          AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */
 615                                                          AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA3 periph B with pullup */
 616                                         };
 617                                 };
 618
 619                                 ssc0 {
 620                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 621                                                 atmel,pins =
 622                                                         <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB16 periph A */
 623                                                          AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB17 periph A */
 624                                                          AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
 625                                         };
 626
 627                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 628                                                 atmel,pins =
 629                                                         <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB19 periph A */
 630                                                          AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB20 periph A */
 631                                                          AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */
 632                                         };
 633                                 };
 634
 635                                 spi0 {
 636                                         pinctrl_spi0: spi0-0 {
 637                                                 atmel,pins =
 638                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PA0 periph A SPI0_MISO pin */
 639                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PA1 periph A SPI0_MOSI pin */
 640                                                          AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A SPI0_SPCK pin */
 641                                         };
 642                                 };
 643
 644                                 spi1 {
 645                                         pinctrl_spi1: spi1-0 {
 646                                                 atmel,pins =
 647                                                         <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB0 periph A SPI1_MISO pin */
 648                                                          AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB1 periph A SPI1_MOSI pin */
 649                                                          AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB2 periph A SPI1_SPCK pin */
 650                                         };
 651                                 };
 652
 653                                 i2c_gpio0 {
 654                                         pinctrl_i2c_gpio0: i2c_gpio0-0 {
 655                                                 atmel,pins =
 656                                                         <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
 657                                                          AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
 658                                         };
 659                                 };
 660
 661                                 tcb0 {
 662                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 663                                                 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 664                                         };
 665
 666                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 667                                                 atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 668                                         };
 669
 670                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 671                                                 atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 672                                         };
 673
 674                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 675                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 676                                         };
 677
 678                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 679                                                 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 680                                         };
 681
 682                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 683                                                 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 684                                         };
 685
 686                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 687                                                 atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 688                                         };
 689
 690                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 691                                                 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 692                                         };
 693
 694                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 695                                                 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 696                                         };
 697                                 };
 698
 699                                 tcb1 {
 700                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 701                                                 atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 702                                         };
 703
 704                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 705                                                 atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 706                                         };
 707
 708                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 709                                                 atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 710                                         };
 711
 712                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 713                                                 atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 714                                         };
 715
 716                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 717                                                 atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 718                                         };
 719
 720                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 721                                                 atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 722                                         };
 723
 724                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 725                                                 atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 726                                         };
 727
 728                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 729                                                 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 730                                         };
 731
 732                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 733                                                 atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 734                                         };
 735                                 };
 736
 737                                 pioA: gpio@fffff400 {
 738                                         compatible = "atmel,at91rm9200-gpio";
 739                                         reg = <0xfffff400 0x200>;
 740                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 741                                         #gpio-cells = <2>;
 742                                         gpio-controller;
 743                                         interrupt-controller;
 744                                         #interrupt-cells = <2>;
 745                                         clocks = <&pioA_clk>;
 746                                 };
 747
 748                                 pioB: gpio@fffff600 {
 749                                         compatible = "atmel,at91rm9200-gpio";
 750                                         reg = <0xfffff600 0x200>;
 751                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 752                                         #gpio-cells = <2>;
 753                                         gpio-controller;
 754                                         interrupt-controller;
 755                                         #interrupt-cells = <2>;
 756                                         clocks = <&pioB_clk>;
 757                                 };
 758
 759                                 pioC: gpio@fffff800 {
 760                                         compatible = "atmel,at91rm9200-gpio";
 761                                         reg = <0xfffff800 0x200>;
 762                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 763                                         #gpio-cells = <2>;
 764                                         gpio-controller;
 765                                         interrupt-controller;
 766                                         #interrupt-cells = <2>;
 767                                         clocks = <&pioC_clk>;
 768                                 };
 769                         };
 770
 771                         dbgu: serial@fffff200 {
 772                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 773                                 reg = <0xfffff200 0x200>;
 774                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 775                                 pinctrl-names = "default";
 776                                 pinctrl-0 = <&pinctrl_dbgu>;
 777                                 clocks = <&mck>;
 778                                 clock-names = "usart";
 779                                 status = "disabled";
 780                         };
 781
 782                         usart0: serial@fffb0000 {
 783                                 compatible = "atmel,at91sam9260-usart";
 784                                 reg = <0xfffb0000 0x200>;
 785                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 786                                 atmel,use-dma-rx;
 787                                 atmel,use-dma-tx;
 788                                 pinctrl-names = "default";
 789                                 pinctrl-0 = <&pinctrl_usart0>;
 790                                 clocks = <&usart0_clk>;
 791                                 clock-names = "usart";
 792                                 status = "disabled";
 793                         };
 794
 795                         usart1: serial@fffb4000 {
 796                                 compatible = "atmel,at91sam9260-usart";
 797                                 reg = <0xfffb4000 0x200>;
 798                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 799                                 atmel,use-dma-rx;
 800                                 atmel,use-dma-tx;
 801                                 pinctrl-names = "default";
 802                                 pinctrl-0 = <&pinctrl_usart1>;
 803                                 clocks = <&usart1_clk>;
 804                                 clock-names = "usart";
 805                                 status = "disabled";
 806                         };
 807
 808                         usart2: serial@fffb8000 {
 809                                 compatible = "atmel,at91sam9260-usart";
 810                                 reg = <0xfffb8000 0x200>;
 811                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 812                                 atmel,use-dma-rx;
 813                                 atmel,use-dma-tx;
 814                                 pinctrl-names = "default";
 815                                 pinctrl-0 = <&pinctrl_usart2>;
 816                                 clocks = <&usart2_clk>;
 817                                 clock-names = "usart";
 818                                 status = "disabled";
 819                         };
 820
 821                         usart3: serial@fffd0000 {
 822                                 compatible = "atmel,at91sam9260-usart";
 823                                 reg = <0xfffd0000 0x200>;
 824                                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 825                                 atmel,use-dma-rx;
 826                                 atmel,use-dma-tx;
 827                                 pinctrl-names = "default";
 828                                 pinctrl-0 = <&pinctrl_usart3>;
 829                                 clocks = <&usart3_clk>;
 830                                 clock-names = "usart";
 831                                 status = "disabled";
 832                         };
 833
 834                         uart0: serial@fffd4000 {
 835                                 compatible = "atmel,at91sam9260-usart";
 836                                 reg = <0xfffd4000 0x200>;
 837                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 838                                 atmel,use-dma-rx;
 839                                 atmel,use-dma-tx;
 840                                 pinctrl-names = "default";
 841                                 pinctrl-0 = <&pinctrl_uart0>;
 842                                 clocks = <&uart0_clk>;
 843                                 clock-names = "usart";
 844                                 status = "disabled";
 845                         };
 846
 847                         uart1: serial@fffd8000 {
 848                                 compatible = "atmel,at91sam9260-usart";
 849                                 reg = <0xfffd8000 0x200>;
 850                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 851                                 atmel,use-dma-rx;
 852                                 atmel,use-dma-tx;
 853                                 pinctrl-names = "default";
 854                                 pinctrl-0 = <&pinctrl_uart1>;
 855                                 clocks = <&uart1_clk>;
 856                                 clock-names = "usart";
 857                                 status = "disabled";
 858                         };
 859
 860                         macb0: ethernet@fffc4000 {
 861                                 compatible = "cdns,at91sam9260-macb", "cdns,macb";
 862                                 reg = <0xfffc4000 0x100>;
 863                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 864                                 pinctrl-names = "default";
 865                                 pinctrl-0 = <&pinctrl_macb_rmii>;
 866                                 clocks = <&macb0_clk>, <&macb0_clk>;
 867                                 clock-names = "hclk", "pclk";
 868                                 status = "disabled";
 869                         };
 870
 871                         usb1: gadget@fffa4000 {
 872                                 compatible = "atmel,at91sam9260-udc";
 873                                 reg = <0xfffa4000 0x4000>;
 874                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 875                                 clocks = <&udc_clk>, <&udpck>;
 876                                 clock-names = "pclk", "hclk";
 877                                 status = "disabled";
 878                         };
 879
 880                         i2c0: i2c@fffac000 {
 881                                 compatible = "atmel,at91sam9260-i2c";
 882                                 reg = <0xfffac000 0x100>;
 883                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 884                                 #address-cells = <1>;
 885                                 #size-cells = <0>;
 886                                 clocks = <&twi0_clk>;
 887                                 status = "disabled";
 888                         };
 889
 890                         mmc0: mmc@fffa8000 {
 891                                 compatible = "atmel,hsmci";
 892                                 reg = <0xfffa8000 0x600>;
 893                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 894                                 #address-cells = <1>;
 895                                 #size-cells = <0>;
 896                                 pinctrl-names = "default";
 897                                 clocks = <&mci0_clk>;
 898                                 clock-names = "mci_clk";
 899                                 status = "disabled";
 900                         };
 901
 902                         ssc0: ssc@fffbc000 {
 903                                 compatible = "atmel,at91rm9200-ssc";
 904                                 reg = <0xfffbc000 0x4000>;
 905                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 906                                 pinctrl-names = "default";
 907                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 908                                 clocks = <&ssc0_clk>;
 909                                 clock-names = "pclk";
 910                                 status = "disabled";
 911                         };
 912
 913                         spi0: spi@fffc8000 {
 914                                 #address-cells = <1>;
 915                                 #size-cells = <0>;
 916                                 compatible = "atmel,at91rm9200-spi";
 917                                 reg = <0xfffc8000 0x200>;
 918                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 919                                 pinctrl-names = "default";
 920                                 pinctrl-0 = <&pinctrl_spi0>;
 921                                 clocks = <&spi0_clk>;
 922                                 clock-names = "spi_clk";
 923                                 status = "disabled";
 924                         };
 925
 926                         spi1: spi@fffcc000 {
 927                                 #address-cells = <1>;
 928                                 #size-cells = <0>;
 929                                 compatible = "atmel,at91rm9200-spi";
 930                                 reg = <0xfffcc000 0x200>;
 931                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 932                                 pinctrl-names = "default";
 933                                 pinctrl-0 = <&pinctrl_spi1>;
 934                                 clocks = <&spi1_clk>;
 935                                 clock-names = "spi_clk";
 936                                 status = "disabled";
 937                         };
 938
 939                         adc0: adc@fffe0000 {
 940                                 #address-cells = <1>;
 941                                 #size-cells = <0>;
 942                                 compatible = "atmel,at91sam9260-adc";
 943                                 reg = <0xfffe0000 0x100>;
 944                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
 945                                 clocks = <&adc_clk>, <&adc_op_clk>;
 946                                 clock-names = "adc_clk", "adc_op_clk";
 947                                 atmel,adc-use-external-triggers;
 948                                 atmel,adc-channels-used = <0xf>;
 949                                 atmel,adc-vref = <3300>;
 950                                 atmel,adc-startup-time = <15>;
 951                                 atmel,adc-res = <8 10>;
 952                                 atmel,adc-res-names = "lowres", "highres";
 953                                 atmel,adc-use-res = "highres";
 954
 955                                 trigger0 {
 956                                         trigger-name = "timer-counter-0";
 957                                         trigger-value = <0x1>;
 958                                 };
 959                                 trigger1 {
 960                                         trigger-name = "timer-counter-1";
 961                                         trigger-value = <0x3>;
 962                                 };
 963
 964                                 trigger2 {
 965                                         trigger-name = "timer-counter-2";
 966                                         trigger-value = <0x5>;
 967                                 };
 968
 969                                 trigger3 {
 970                                         trigger-name = "external";
 971                                         trigger-value = <0xd>;
 972                                         trigger-external;
 973                                 };
 974                         };
 975
 976                         rtc@fffffd20 {
 977                                 compatible = "atmel,at91sam9260-rtt";
 978                                 reg = <0xfffffd20 0x10>;
 979                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 980                                 clocks = <&clk32k>;
 981                                 status = "disabled";
 982                         };
 983
 984                         watchdog@fffffd40 {
 985                                 compatible = "atmel,at91sam9260-wdt";
 986                                 reg = <0xfffffd40 0x10>;
 987                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 988                                 clocks = <&clk32k>;
 989                                 atmel,watchdog-type = "hardware";
 990                                 atmel,reset-type = "all";
 991                                 atmel,dbg-halt;
 992                                 status = "disabled";
 993                         };
 994
 995                         gpbr: syscon@fffffd50 {
 996                                 compatible = "atmel,at91sam9260-gpbr", "syscon";
 997                                 reg = <0xfffffd50 0x10>;
 998                                 status = "disabled";
 999                         };
1000                 };
1001
1002                 usb0: ohci@500000 {
1003                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1004                         reg = <0x00500000 0x100000>;
1005                         interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
1006                         clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
1007                         clock-names = "ohci_clk", "hclk", "uhpck";
1008                         status = "disabled";
1009                 };
1010
1011                 ebi: ebi@10000000 {
1012                         compatible = "atmel,at91sam9260-ebi";
1013                         #address-cells = <2>;
1014                         #size-cells = <1>;
1015                         atmel,smc = <&smc>;
1016                         atmel,matrix = <&matrix>;
1017                         reg = <0x10000000 0x80000000>;
1018                         ranges = <0x0 0x0 0x10000000 0x10000000
1019                                   0x1 0x0 0x20000000 0x10000000
1020                                   0x2 0x0 0x30000000 0x10000000
1021                                   0x3 0x0 0x40000000 0x10000000
1022                                   0x4 0x0 0x50000000 0x10000000
1023                                   0x5 0x0 0x60000000 0x10000000
1024                                   0x6 0x0 0x70000000 0x10000000
1025                                   0x7 0x0 0x80000000 0x10000000>;
1026                         clocks = <&mck>;
1027                         status = "disabled";
1028
1029                         nand_controller: nand-controller {
1030                                 compatible = "atmel,at91sam9260-nand-controller";
1031                                 #address-cells = <2>;
1032                                 #size-cells = <1>;
1033                                 ranges;
1034                                 status = "disabled";
1035                         };
1036                 };
1037         };
1038
1039         i2c-gpio-0 {
1040                 compatible = "i2c-gpio";
1041                 gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
1042                          &pioA 24 GPIO_ACTIVE_HIGH /* scl */
1043                         >;
1044                 i2c-gpio,sda-open-drain;
1045                 i2c-gpio,scl-open-drain;
1046                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1047                 #address-cells = <1>;
1048                 #size-cells = <0>;
1049                 pinctrl-names = "default";
1050                 pinctrl-0 = <&pinctrl_i2c_gpio0>;
1051                 status = "disabled";
1052         };
1053 };