arch/arm/boot/dts/at91-sama5d4_xplained.dts

   1 /*
   2  * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
   3  *
   4  *  Copyright (C) 2015 Atmel,
   5  *                2015 Josh Wu <josh.wu@atmel.com>
   6  *
   7  * This file is dual-licensed: you can use it either under the terms
   8  * of the GPL or the X11 license, at your option. Note that this dual
   9  * licensing only applies to this file, and not this project as a
  10  * whole.
  11  *
  12  *  a) This file is free software; you can redistribute it and/or
  13  *     modify it under the terms of the GNU General Public License as
  14  *     published by the Free Software Foundation; either version 2 of the
  15  *     License, or (at your option) any later version.
  16  *
  17  *     This file is distributed in the hope that it will be useful,
  18  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *     GNU General Public License for more details.
  21  *
  22  * Or, alternatively,
  23  *
  24  *  b) Permission is hereby granted, free of charge, to any person
  25  *     obtaining a copy of this software and associated documentation
  26  *     files (the "Software"), to deal in the Software without
  27  *     restriction, including without limitation the rights to use,
  28  *     copy, modify, merge, publish, distribute, sublicense, and/or
  29  *     sell copies of the Software, and to permit persons to whom the
  30  *     Software is furnished to do so, subject to the following
  31  *     conditions:
  32  *
  33  *     The above copyright notice and this permission notice shall be
  34  *     included in all copies or substantial portions of the Software.
  35  *
  36  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  37  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  38  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  39  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  40  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  41  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  42  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  43  *     OTHER DEALINGS IN THE SOFTWARE.
  44  */
  45 /dts-v1/;
  46 #include "sama5d4.dtsi"
  47
  48 / {
  49         model = "Atmel SAMA5D4 Xplained";
  50         compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
  51
  52         chosen {
  53                 stdout-path = "serial0:115200n8";
  54         };
  55
  56         memory {
  57                 reg = <0x20000000 0x20000000>;
  58         };
  59
  60         clocks {
  61                 slow_xtal {
  62                         clock-frequency = <32768>;
  63                 };
  64
  65                 main_xtal {
  66                         clock-frequency = <12000000>;
  67                 };
  68         };
  69
  70         ahb {
  71                 apb {
  72                         uart0: serial@f8004000 {
  73                                 atmel,use-dma-rx;
  74                                 atmel,use-dma-tx;
  75                                 status = "okay";
  76                         };
  77
  78                         spi0: spi@f8010000 {
  79                                 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
  80                                 status = "okay";
  81                                 m25p80@0 {
  82                                         compatible = "atmel,at25df321a";
  83                                         spi-max-frequency = <50000000>;
  84                                         reg = <0>;
  85                                 };
  86                         };
  87
  88                         i2c0: i2c@f8014000 {
  89                                 status = "okay";
  90                         };
  91
  92                         macb0: ethernet@f8020000 {
  93                                 phy-mode = "rmii";
  94                                 status = "okay";
  95                                 pinctrl-names = "default";
  96                                 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
  97
  98                                 phy0: ethernet-phy@1 {
  99                                         interrupt-parent = <&pioE>;
 100                                         interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 101                                         reg = <1>;
 102                                 };
 103                         };
 104
 105                         mmc1: mmc@fc000000 {
 106                                 pinctrl-names = "default";
 107                                 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
 108                                 vmmc-supply = <&vcc_mmc1_reg>;
 109                                 vqmmc-supply = <&vcc_3v3_reg>;
 110                                 status = "okay";
 111                                 slot@0 {
 112                                         reg = <0>;
 113                                         bus-width = <4>;
 114                                         cd-gpios = <&pioE 3 0>;
 115                                 };
 116                         };
 117
 118                         usart3: serial@fc00c000 {
 119                                 atmel,use-dma-rx;
 120                                 atmel,use-dma-tx;
 121                                 status = "okay";
 122                         };
 123
 124                         usart4: serial@fc010000 {
 125                                 status = "okay";
 126                         };
 127
 128                         spi1: spi@fc018000 {
 129                                 cs-gpios = <&pioB 21 0>;
 130                                 status = "okay";
 131                         };
 132
 133                         tcb2: timer@fc024000 {
 134                                 timer0: timer@0 {
 135                                         compatible = "atmel,tcb-timer";
 136                                         reg = <0>;
 137                                 };
 138
 139                                 timer1: timer@1 {
 140                                         compatible = "atmel,tcb-timer";
 141                                         reg = <1>;
 142                                 };
 143                         };
 144
 145                         adc0: adc@fc034000 {
 146                                 pinctrl-names = "default";
 147                                 pinctrl-0 = <
 148                                         /* external trigger conflicts with USBA_VBUS */
 149                                         &pinctrl_adc0_ad0
 150                                         &pinctrl_adc0_ad1
 151                                         &pinctrl_adc0_ad2
 152                                         &pinctrl_adc0_ad3
 153                                         &pinctrl_adc0_ad4
 154                                         >;
 155                                 atmel,adc-vref = <3300>;
 156                                 status = "okay";
 157                         };
 158
 159                         watchdog@fc068640 {
 160                                 status = "okay";
 161                         };
 162
 163                         pinctrl@fc06a000 {
 164                                 board {
 165                                         pinctrl_mmc1_cd: mmc1_cd {
 166                                                 atmel,pins =
 167                                                         <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 168                                         };
 169                                         pinctrl_usba_vbus: usba_vbus {
 170                                                 atmel,pins =
 171                                                         <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
 172                                         };
 173                                         pinctrl_key_gpio: key_gpio_0 {
 174                                                 atmel,pins =
 175                                                         <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 176                                         };
 177                                         pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
 178                                                 atmel,pins =
 179                                                         <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 180                                         };
 181                                 };
 182                         };
 183                 };
 184
 185                 usb0: gadget@400000 {
 186                         atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 187                         pinctrl-names = "default";
 188                         pinctrl-0 = <&pinctrl_usba_vbus>;
 189                         status = "okay";
 190                 };
 191
 192                 usb1: ohci@500000 {
 193                         num-ports = <3>;
 194                         atmel,vbus-gpio = <0
 195                                            &pioE 11 GPIO_ACTIVE_HIGH
 196                                            &pioE 14 GPIO_ACTIVE_HIGH
 197                                           >;
 198                         status = "okay";
 199                 };
 200
 201                 usb2: ehci@600000 {
 202                         status = "okay";
 203                 };
 204
 205                 ebi: ebi@10000000 {
 206                         pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
 207                                      &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
 208                                      &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
 209                         pinctrl-names = "default";
 210                         status = "okay";
 211
 212                         nand_controller: nand-controller {
 213                                 status = "okay";
 214
 215                                 nand@3 {
 216                                         reg = <0x3 0x0 0x2>;
 217                                         atmel,rb = <0>;
 218                                         nand-bus-width = <8>;
 219                                         nand-ecc-mode = "hw";
 220                                         nand-on-flash-bbt;
 221                                         label = "atmel_nand";
 222
 223                                         partitions {
 224                                                 compatible = "fixed-partitions";
 225                                                 #address-cells = <1>;
 226                                                 #size-cells = <1>;
 227
 228                                                 at91bootstrap@0 {
 229                                                         label = "at91bootstrap";
 230                                                         reg = <0x0 0x40000>;
 231                                                 };
 232
 233                                                 bootloader@40000 {
 234                                                         label = "bootloader";
 235                                                         reg = <0x40000 0x80000>;
 236                                                 };
 237
 238                                                 bootloaderenv@c0000 {
 239                                                         label = "bootloader env";
 240                                                         reg = <0xc0000 0xc0000>;
 241                                                 };
 242
 243                                                 dtb@180000 {
 244                                                         label = "device tree";
 245                                                         reg = <0x180000 0x80000>;
 246                                                 };
 247
 248                                                 kernel@200000 {
 249                                                         label = "kernel";
 250                                                         reg = <0x200000 0x600000>;
 251                                                 };
 252
 253                                                 rootfs@800000 {
 254                                                         label = "rootfs";
 255                                                         reg = <0x800000 0x0f800000>;
 256                                                 };
 257                                         };
 258                                 };
 259                         };
 260                 };
 261         };
 262
 263         gpio_keys {
 264                 compatible = "gpio-keys";
 265
 266                 pinctrl-names = "default";
 267                 pinctrl-0 = <&pinctrl_key_gpio>;
 268
 269                 pb_user1 {
 270                         label = "pb_user1";
 271                         gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
 272                         linux,code = <0x100>;
 273                         wakeup-source;
 274                 };
 275         };
 276
 277         leds {
 278                 compatible = "gpio-leds";
 279                 status = "okay";
 280
 281                 d8 {
 282                         label = "d8";
 283                         gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 284                         default-state = "on";
 285                 };
 286
 287                 d10 {
 288                         label = "d10";
 289                         gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
 290                         linux,default-trigger = "heartbeat";
 291                 };
 292         };
 293
 294         vcc_3v3_reg: fixedregulator_3v3 {
 295                 compatible = "regulator-fixed";
 296                 regulator-name = "VCC 3V3";
 297                 regulator-min-microvolt = <3300000>;
 298                 regulator-max-microvolt = <3300000>;
 299                 regulator-boot-on;
 300                 regulator-always-on;
 301         };
 302
 303         vcc_mmc1_reg: fixedregulator_mmc1 {
 304                 compatible = "regulator-fixed";
 305                 gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 306                 regulator-name = "VDD MCI1";
 307                 regulator-min-microvolt = <3300000>;
 308                 regulator-max-microvolt = <3300000>;
 309                 vin-supply = <&vcc_3v3_reg>;
 310                 regulator-always-on;
 311         };
 312 };