arch/arm/boot/dts/at91-sama5d2_xplained.dts

   1 /*
   2  * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
   3  *
   4  *  Copyright (C) 2015 Atmel,
   5  *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
   6  *
   7  * This file is dual-licensed: you can use it either under the terms
   8  * of the GPL or the X11 license, at your option. Note that this dual
   9  * licensing only applies to this file, and not this project as a
  10  * whole.
  11  *
  12  *  a) This file is free software; you can redistribute it and/or
  13  *     modify it under the terms of the GNU General Public License as
  14  *     published by the Free Software Foundation; either version 2 of the
  15  *     License, or (at your option) any later version.
  16  *
  17  *     This file is distributed in the hope that it will be useful,
  18  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *     GNU General Public License for more details.
  21  *
  22  * Or, alternatively,
  23  *
  24  *  b) Permission is hereby granted, free of charge, to any person
  25  *     obtaining a copy of this software and associated documentation
  26  *     files (the "Software"), to deal in the Software without
  27  *     restriction, including without limitation the rights to use,
  28  *     copy, modify, merge, publish, distribute, sublicense, and/or
  29  *     sell copies of the Software, and to permit persons to whom the
  30  *     Software is furnished to do so, subject to the following
  31  *     conditions:
  32  *
  33  *     The above copyright notice and this permission notice shall be
  34  *     included in all copies or substantial portions of the Software.
  35  *
  36  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  37  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  38  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  39  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  40  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  41  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  42  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  43  *     OTHER DEALINGS IN THE SOFTWARE.
  44  */
  45 /dts-v1/;
  46 #include "sama5d2.dtsi"
  47 #include "sama5d2-pinfunc.h"
  48 #include <dt-bindings/mfd/atmel-flexcom.h>
  49 #include <dt-bindings/gpio/gpio.h>
  50
  51 / {
  52         model = "Atmel SAMA5D2 Xplained";
  53         compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
  54
  55         chosen {
  56                 stdout-path = "serial0:115200n8";
  57         };
  58
  59         clocks {
  60                 slow_xtal {
  61                         clock-frequency = <32768>;
  62                 };
  63
  64                 main_xtal {
  65                         clock-frequency = <12000000>;
  66                 };
  67         };
  68
  69         ahb {
  70                 usb0: gadget@00300000 {
  71                         atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
  72                         pinctrl-names = "default";
  73                         pinctrl-0 = <&pinctrl_usba_vbus>;
  74                         status = "okay";
  75                 };
  76
  77                 usb1: ohci@00400000 {
  78                         num-ports = <3>;
  79                         atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
  80                                            &pioA 42 GPIO_ACTIVE_HIGH
  81                                            0
  82                                           >;
  83                         pinctrl-names = "default";
  84                         pinctrl-0 = <&pinctrl_usb_default>;
  85                         status = "okay";
  86                 };
  87
  88                 usb2: ehci@00500000 {
  89                         status = "okay";
  90                 };
  91
  92                 sdmmc0: sdio-host@a0000000 {
  93                         bus-width = <8>;
  94                         pinctrl-names = "default";
  95                         pinctrl-0 = <&pinctrl_sdmmc0_default>;
  96                         non-removable;
  97                         mmc-ddr-1_8v;
  98                         status = "okay";
  99                 };
 100
 101                 sdmmc1: sdio-host@b0000000 {
 102                         bus-width = <4>;
 103                         pinctrl-names = "default";
 104                         pinctrl-0 = <&pinctrl_sdmmc1_default>;
 105                         status = "okay"; /* conflict with qspi0 */
 106                 };
 107
 108                 apb {
 109                         spi0: spi@f8000000 {
 110                                 pinctrl-names = "default";
 111                                 pinctrl-0 = <&pinctrl_spi0_default>;
 112                                 status = "okay";
 113
 114                                 m25p80@0 {
 115                                         compatible = "atmel,at25df321a";
 116                                         reg = <0>;
 117                                         spi-max-frequency = <50000000>;
 118                                 };
 119                         };
 120
 121                         macb0: ethernet@f8008000 {
 122                                 pinctrl-names = "default";
 123                                 pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
 124                                 phy-mode = "rmii";
 125                                 status = "okay";
 126
 127                                 ethernet-phy@1 {
 128                                         reg = <0x1>;
 129                                         interrupt-parent = <&pioA>;
 130                                         interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
 131                                 };
 132                         };
 133
 134                         pdmic@f8018000 {
 135                                 pinctrl-names = "default";
 136                                 pinctrl-0 = <&pinctrl_pdmic_default>;
 137                                 atmel,model = "PDMIC @ sama5d2_xplained";
 138                                 atmel,mic-min-freq = <1000000>;
 139                                 atmel,mic-max-freq = <3246000>;
 140                                 atmel,mic-offset = <0x0>;
 141                                 status = "okay";
 142                         };
 143
 144                         uart1: serial@f8020000 {
 145                                 pinctrl-names = "default";
 146                                 pinctrl-0 = <&pinctrl_uart1_default>;
 147                                 atmel,use-dma-rx;
 148                                 atmel,use-dma-tx;
 149                                 status = "okay";
 150                         };
 151
 152                         i2c0: i2c@f8028000 {
 153                                 dmas = <0>, <0>;
 154                                 pinctrl-names = "default";
 155                                 pinctrl-0 = <&pinctrl_i2c0_default>;
 156                                 i2c-sda-hold-time-ns = <350>;
 157                                 status = "okay";
 158
 159                                 pmic@5b {
 160                                         compatible = "active-semi,act8945a";
 161                                         reg = <0x5b>;
 162                                         active-semi,vsel-high;
 163                                         active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
 164                                         active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
 165                                         active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
 166                                         active-semi,input-voltage-threshold-microvolt = <6600>;
 167                                         active-semi,precondition-timeout = <40>;
 168                                         active-semi,total-timeout = <3>;
 169                                         pinctrl-names = "default";
 170                                         pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 171                                         status = "okay";
 172
 173                                         regulators {
 174                                                 vdd_1v35_reg: REG_DCDC1 {
 175                                                         regulator-name = "VDD_1V35";
 176                                                         regulator-min-microvolt = <1350000>;
 177                                                         regulator-max-microvolt = <1350000>;
 178                                                         regulator-always-on;
 179                                                 };
 180
 181                                                 vdd_1v2_reg: REG_DCDC2 {
 182                                                         regulator-name = "VDD_1V2";
 183                                                         regulator-min-microvolt = <1100000>;
 184                                                         regulator-max-microvolt = <1300000>;
 185                                                         regulator-always-on;
 186                                                 };
 187
 188                                                 vdd_3v3_reg: REG_DCDC3 {
 189                                                         regulator-name = "VDD_3V3";
 190                                                         regulator-min-microvolt = <3300000>;
 191                                                         regulator-max-microvolt = <3300000>;
 192                                                         regulator-always-on;
 193                                                 };
 194
 195                                                 vdd_fuse_reg: REG_LDO1 {
 196                                                         regulator-name = "VDD_FUSE";
 197                                                         regulator-min-microvolt = <2500000>;
 198                                                         regulator-max-microvolt = <2500000>;
 199                                                         regulator-always-on;
 200                                                 };
 201
 202                                                 vdd_3v3_lp_reg: REG_LDO2 {
 203                                                         regulator-name = "VDD_3V3_LP";
 204                                                         regulator-min-microvolt = <3300000>;
 205                                                         regulator-max-microvolt = <3300000>;
 206                                                         regulator-always-on;
 207                                                 };
 208
 209                                                 vdd_led_reg: REG_LDO3 {
 210                                                         regulator-name = "VDD_LED";
 211                                                         regulator-min-microvolt = <3300000>;
 212                                                         regulator-max-microvolt = <3300000>;
 213                                                         regulator-always-on;
 214                                                 };
 215
 216                                                 vdd_sdhc_1v8_reg: REG_LDO4 {
 217                                                         regulator-name = "VDD_SDHC_1V8";
 218                                                         regulator-min-microvolt = <1800000>;
 219                                                         regulator-max-microvolt = <1800000>;
 220                                                         regulator-always-on;
 221                                                 };
 222                                         };
 223                                 };
 224                         };
 225
 226                         pwm0: pwm@f802c000 {
 227                                 status = "okay";
 228                         };
 229
 230                         flx0: flexcom@f8034000 {
 231                                 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 232                                 status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
 233
 234                                 uart5: serial@200 {
 235                                         compatible = "atmel,at91sam9260-usart";
 236                                         reg = <0x200 0x200>;
 237                                         interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 238                                         clocks = <&flx0_clk>;
 239                                         clock-names = "usart";
 240                                         pinctrl-names = "default";
 241                                         pinctrl-0 = <&pinctrl_flx0_default>;
 242                                         atmel,fifo-size = <32>;
 243                                         status = "okay";
 244                                 };
 245                         };
 246
 247                         shdwc@f8048010 {
 248                                 atmel,shdwc-debouncer = <976>;
 249                                 atmel,wakeup-rtc-timer;
 250
 251                                 input@0 {
 252                                         reg = <0>;
 253                                         atmel,wakeup-type = "low";
 254                                 };
 255                         };
 256
 257                         watchdog@f8048040 {
 258                                 status = "okay";
 259                         };
 260
 261                         can0: can@f8054000 {
 262                                 pinctrl-names = "default";
 263                                 pinctrl-0 = <&pinctrl_can0_default>;
 264                                 status = "okay";
 265                         };
 266
 267                         uart3: serial@fc008000 {
 268                                 atmel,use-dma-rx;
 269                                 atmel,use-dma-tx;
 270                                 pinctrl-names = "default";
 271                                 pinctrl-0 = <&pinctrl_uart3_default>;
 272                                 status = "okay";
 273                         };
 274
 275                         flx4: flexcom@fc018000 {
 276                                 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 277                                 status = "okay";
 278
 279                                 i2c2: i2c@600 {
 280                                         compatible = "atmel,sama5d2-i2c";
 281                                         reg = <0x600 0x200>;
 282                                         interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
 283                                         dmas = <0>, <0>;
 284                                         dma-names = "tx", "rx";
 285                                         #address-cells = <1>;
 286                                         #size-cells = <0>;
 287                                         clocks = <&flx4_clk>;
 288                                         pinctrl-names = "default";
 289                                         pinctrl-0 = <&pinctrl_flx4_default>;
 290                                         atmel,fifo-size = <16>;
 291                                         status = "okay";
 292                                 };
 293                         };
 294
 295                         i2c1: i2c@fc028000 {
 296                                 dmas = <0>, <0>;
 297                                 pinctrl-names = "default";
 298                                 pinctrl-0 = <&pinctrl_i2c1_default>;
 299                                 status = "okay";
 300
 301                                 at24@54 {
 302                                         compatible = "atmel,24c02";
 303                                         reg = <0x54>;
 304                                         pagesize = <16>;
 305                                 };
 306                         };
 307
 308                         adc: adc@fc030000 {
 309                                 vddana-supply = <&vdd_3v3_lp_reg>;
 310                                 vref-supply = <&vdd_3v3_lp_reg>;
 311                                 pinctrl-names = "default";
 312                                 pinctrl-0 = <&pinctrl_adc_default>;
 313                                 status = "okay";
 314                         };
 315
 316                         pinctrl@fc038000 {
 317                                 /*
 318                                  * There is no real pinmux for ADC, if the pin
 319                                  * is not requested by another peripheral then
 320                                  * the muxing is done when channel is enabled.
 321                                  * Requesting pins for ADC is GPIO is
 322                                  * encouraged to prevent conflicts and to
 323                                  * disable bias in order to be in the same
 324                                  * state when the pin is not muxed to the adc.
 325                                  */
 326                                 pinctrl_adc_default: adc_default {
 327                                         pinmux = <PIN_PD23__GPIO>;
 328                                         bias-disable;
 329                                 };
 330
 331                                 pinctrl_can0_default: can0_default {
 332                                         pinmux = <PIN_PC10__CANTX0>,
 333                                                  <PIN_PC11__CANRX0>;
 334                                         bias-disable;
 335                                 };
 336
 337                                 pinctrl_can1_default: can1_default {
 338                                         pinmux = <PIN_PC26__CANTX1>,
 339                                                  <PIN_PC27__CANRX1>;
 340                                         bias-disable;
 341                                 };
 342
 343                                 pinctrl_charger_chglev: charger_chglev {
 344                                         pinmux = <PIN_PA12__GPIO>;
 345                                         bias-disable;
 346                                 };
 347
 348                                 pinctrl_charger_irq: charger_irq {
 349                                         pinmux = <PIN_PB13__GPIO>;
 350                                         bias-disable;
 351                                 };
 352
 353                                 pinctrl_charger_lbo: charger_lbo {
 354                                         pinmux = <PIN_PC8__GPIO>;
 355                                         bias-pull-up;
 356                                 };
 357
 358                                 pinctrl_flx0_default: flx0_default {
 359                                         pinmux = <PIN_PB28__FLEXCOM0_IO0>,
 360                                                  <PIN_PB29__FLEXCOM0_IO1>;
 361                                         bias-disable;
 362                                 };
 363
 364                                 pinctrl_flx4_default: flx4_default {
 365                                         pinmux = <PIN_PD12__FLEXCOM4_IO0>,
 366                                                  <PIN_PD13__FLEXCOM4_IO1>;
 367                                         bias-disable;
 368                                 };
 369
 370                                 pinctrl_i2c0_default: i2c0_default {
 371                                         pinmux = <PIN_PD21__TWD0>,
 372                                                  <PIN_PD22__TWCK0>;
 373                                         bias-disable;
 374                                 };
 375
 376                                 pinctrl_i2c1_default: i2c1_default {
 377                                         pinmux = <PIN_PD4__TWD1>,
 378                                                  <PIN_PD5__TWCK1>;
 379                                         bias-disable;
 380                                 };
 381
 382                                 pinctrl_key_gpio_default: key_gpio_default {
 383                                         pinmux = <PIN_PB9__GPIO>;
 384                                         bias-pull-up;
 385                                 };
 386
 387                                 pinctrl_led_gpio_default: led_gpio_default {
 388                                         pinmux = <PIN_PB0__GPIO>,
 389                                                  <PIN_PB5__GPIO>,
 390                                                  <PIN_PB6__GPIO>;
 391                                         bias-pull-up;
 392                                 };
 393
 394                                 pinctrl_macb0_default: macb0_default {
 395                                         pinmux = <PIN_PB14__GTXCK>,
 396                                                  <PIN_PB15__GTXEN>,
 397                                                  <PIN_PB16__GRXDV>,
 398                                                  <PIN_PB17__GRXER>,
 399                                                  <PIN_PB18__GRX0>,
 400                                                  <PIN_PB19__GRX1>,
 401                                                  <PIN_PB20__GTX0>,
 402                                                  <PIN_PB21__GTX1>,
 403                                                  <PIN_PB22__GMDC>,
 404                                                  <PIN_PB23__GMDIO>;
 405                                         bias-disable;
 406                                 };
 407
 408                                 pinctrl_macb0_phy_irq: macb0_phy_irq {
 409                                         pinmux = <PIN_PC9__GPIO>;
 410                                         bias-disable;
 411                                 };
 412
 413                                 pinctrl_pdmic_default: pdmic_default {
 414                                         pinmux = <PIN_PB26__PDMIC_DAT>,
 415                                                 <PIN_PB27__PDMIC_CLK>;
 416                                         bias-disable;
 417                                 };
 418
 419                                 pinctrl_sdmmc0_default: sdmmc0_default {
 420                                         cmd_data {
 421                                                 pinmux = <PIN_PA1__SDMMC0_CMD>,
 422                                                          <PIN_PA2__SDMMC0_DAT0>,
 423                                                          <PIN_PA3__SDMMC0_DAT1>,
 424                                                          <PIN_PA4__SDMMC0_DAT2>,
 425                                                          <PIN_PA5__SDMMC0_DAT3>,
 426                                                          <PIN_PA6__SDMMC0_DAT4>,
 427                                                          <PIN_PA7__SDMMC0_DAT5>,
 428                                                          <PIN_PA8__SDMMC0_DAT6>,
 429                                                          <PIN_PA9__SDMMC0_DAT7>;
 430                                                 bias-pull-up;
 431                                         };
 432
 433                                         ck_cd_rstn_vddsel {
 434                                                 pinmux = <PIN_PA0__SDMMC0_CK>,
 435                                                          <PIN_PA10__SDMMC0_RSTN>,
 436                                                          <PIN_PA11__SDMMC0_VDDSEL>,
 437                                                          <PIN_PA13__SDMMC0_CD>;
 438                                                 bias-disable;
 439                                         };
 440                                 };
 441
 442                                 pinctrl_sdmmc1_default: sdmmc1_default {
 443                                         cmd_data {
 444                                                 pinmux = <PIN_PA28__SDMMC1_CMD>,
 445                                                          <PIN_PA18__SDMMC1_DAT0>,
 446                                                          <PIN_PA19__SDMMC1_DAT1>,
 447                                                          <PIN_PA20__SDMMC1_DAT2>,
 448                                                          <PIN_PA21__SDMMC1_DAT3>;
 449                                                 bias-pull-up;
 450                                         };
 451
 452                                         conf-ck_cd {
 453                                                 pinmux = <PIN_PA22__SDMMC1_CK>,
 454                                                          <PIN_PA30__SDMMC1_CD>;
 455                                                 bias-disable;
 456                                         };
 457                                 };
 458
 459                                 pinctrl_spi0_default: spi0_default {
 460                                         pinmux = <PIN_PA14__SPI0_SPCK>,
 461                                                  <PIN_PA15__SPI0_MOSI>,
 462                                                  <PIN_PA16__SPI0_MISO>,
 463                                                  <PIN_PA17__SPI0_NPCS0>;
 464                                         bias-disable;
 465                                 };
 466
 467                                 pinctrl_uart1_default: uart1_default {
 468                                         pinmux = <PIN_PD2__URXD1>,
 469                                                  <PIN_PD3__UTXD1>;
 470                                         bias-disable;
 471                                 };
 472
 473                                 pinctrl_uart3_default: uart3_default {
 474                                         pinmux = <PIN_PB11__URXD3>,
 475                                                  <PIN_PB12__UTXD3>;
 476                                         bias-disable;
 477                                 };
 478
 479                                 pinctrl_usb_default: usb_default {
 480                                         pinmux = <PIN_PB10__GPIO>;
 481                                         bias-disable;
 482                                 };
 483
 484                                 pinctrl_usba_vbus: usba_vbus {
 485                                         pinmux = <PIN_PA31__GPIO>;
 486                                         bias-disable;
 487                                 };
 488
 489                         };
 490
 491                         can1: can@fc050000 {
 492                                 pinctrl-names = "default";
 493                                 pinctrl-0 = <&pinctrl_can1_default>;
 494                                 status = "okay";
 495                         };
 496                 };
 497         };
 498
 499         gpio_keys {
 500                 compatible = "gpio-keys";
 501
 502                 pinctrl-names = "default";
 503                 pinctrl-0 = <&pinctrl_key_gpio_default>;
 504
 505                 bp1 {
 506                         label = "PB_USER";
 507                         gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
 508                         linux,code = <0x104>;
 509                 };
 510         };
 511
 512         leds {
 513                 compatible = "gpio-leds";
 514                 pinctrl-names = "default";
 515                 pinctrl-0 = <&pinctrl_led_gpio_default>;
 516                 status = "okay";
 517
 518                 red {
 519                         label = "red";
 520                         gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
 521                 };
 522
 523                 green {
 524                         label = "green";
 525                         gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
 526                 };
 527
 528                 blue {
 529                         label = "blue";
 530                         gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
 531                         linux,default-trigger = "heartbeat";
 532                 };
 533         };
 534 };