arch/arm/boot/dts/armada-375.dtsi

   1 /*
   2  * Device Tree Include file for Marvell Armada 375 family SoC
   3  *
   4  * Copyright (C) 2014 Marvell
   5  *
   6  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   7  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   8  *
   9  * This file is dual-licensed: you can use it either under the terms
  10  * of the GPL or the X11 license, at your option. Note that this dual
  11  * licensing only applies to this file, and not this project as a
  12  * whole.
  13  *
  14  *  a) This file is free software; you can redistribute it and/or
  15  *     modify it under the terms of the GNU General Public License as
  16  *     published by the Free Software Foundation; either version 2 of the
  17  *     License, or (at your option) any later version.
  18  *
  19  *     This file is distributed in the hope that it will be useful,
  20  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  *     GNU General Public License for more details.
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include <dt-bindings/interrupt-controller/arm-gic.h>
  49 #include <dt-bindings/interrupt-controller/irq.h>
  50 #include <dt-bindings/phy/phy.h>
  51
  52 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
  53
  54 / {
  55         #address-cells = <1>;
  56         #size-cells = <1>;
  57
  58         model = "Marvell Armada 375 family SoC";
  59         compatible = "marvell,armada375";
  60
  61         aliases {
  62                 gpio0 = &gpio0;
  63                 gpio1 = &gpio1;
  64                 gpio2 = &gpio2;
  65                 serial0 = &uart0;
  66                 serial1 = &uart1;
  67         };
  68
  69         clocks {
  70                 /* 1 GHz fixed main PLL */
  71                 mainpll: mainpll {
  72                         compatible = "fixed-clock";
  73                         #clock-cells = <0>;
  74                         clock-frequency = <1000000000>;
  75                 };
  76                 /* 25 MHz reference crystal */
  77                 refclk: oscillator {
  78                         compatible = "fixed-clock";
  79                         #clock-cells = <0>;
  80                         clock-frequency = <25000000>;
  81                 };
  82         };
  83
  84         cpus {
  85                 #address-cells = <1>;
  86                 #size-cells = <0>;
  87                 enable-method = "marvell,armada-375-smp";
  88
  89                 cpu0: cpu@0 {
  90                         device_type = "cpu";
  91                         compatible = "arm,cortex-a9";
  92                         reg = <0>;
  93                 };
  94                 cpu1: cpu@1 {
  95                         device_type = "cpu";
  96                         compatible = "arm,cortex-a9";
  97                         reg = <1>;
  98                 };
  99         };
 100
 101         pmu {
 102                 compatible = "arm,cortex-a9-pmu";
 103                 interrupts-extended = <&mpic 3>;
 104         };
 105
 106         soc {
 107                 compatible = "marvell,armada375-mbus", "simple-bus";
 108                 #address-cells = <2>;
 109                 #size-cells = <1>;
 110                 controller = <&mbusc>;
 111                 interrupt-parent = <&gic>;
 112                 pcie-mem-aperture = <0xe0000000 0x8000000>;
 113                 pcie-io-aperture  = <0xe8000000 0x100000>;
 114
 115                 bootrom {
 116                         compatible = "marvell,bootrom";
 117                         reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
 118                 };
 119
 120                 devbus_bootcs: devbus-bootcs {
 121                         compatible = "marvell,mvebu-devbus";
 122                         reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 123                         ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126                         clocks = <&coreclk 0>;
 127                         status = "disabled";
 128                 };
 129
 130                 devbus_cs0: devbus-cs0 {
 131                         compatible = "marvell,mvebu-devbus";
 132                         reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 133                         ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
 134                         #address-cells = <1>;
 135                         #size-cells = <1>;
 136                         clocks = <&coreclk 0>;
 137                         status = "disabled";
 138                 };
 139
 140                 devbus_cs1: devbus-cs1 {
 141                         compatible = "marvell,mvebu-devbus";
 142                         reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 143                         ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
 144                         #address-cells = <1>;
 145                         #size-cells = <1>;
 146                         clocks = <&coreclk 0>;
 147                         status = "disabled";
 148                 };
 149
 150                 devbus_cs2: devbus-cs2 {
 151                         compatible = "marvell,mvebu-devbus";
 152                         reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 153                         ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
 154                         #address-cells = <1>;
 155                         #size-cells = <1>;
 156                         clocks = <&coreclk 0>;
 157                         status = "disabled";
 158                 };
 159
 160                 devbus_cs3: devbus-cs3 {
 161                         compatible = "marvell,mvebu-devbus";
 162                         reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 163                         ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
 164                         #address-cells = <1>;
 165                         #size-cells = <1>;
 166                         clocks = <&coreclk 0>;
 167                         status = "disabled";
 168                 };
 169
 170                 internal-regs {
 171                         compatible = "simple-bus";
 172                         #address-cells = <1>;
 173                         #size-cells = <1>;
 174                         ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 175
 176                         L2: cache-controller@8000 {
 177                                 compatible = "arm,pl310-cache";
 178                                 reg = <0x8000 0x1000>;
 179                                 cache-unified;
 180                                 cache-level = <2>;
 181                                 arm,double-linefill-incr = <0>;
 182                                 arm,double-linefill-wrap = <0>;
 183                                 arm,double-linefill = <0>;
 184                                 prefetch-data = <1>;
 185                         };
 186
 187                         scu: scu@c000 {
 188                                 compatible = "arm,cortex-a9-scu";
 189                                 reg = <0xc000 0x58>;
 190                         };
 191
 192                         timer0: timer@c600 {
 193                                 compatible = "arm,cortex-a9-twd-timer";
 194                                 reg = <0xc600 0x20>;
 195                                 interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
 196                                 clocks = <&coreclk 2>;
 197                         };
 198
 199                         gic: interrupt-controller@d000 {
 200                                 compatible = "arm,cortex-a9-gic";
 201                                 #interrupt-cells = <3>;
 202                                 #size-cells = <0>;
 203                                 interrupt-controller;
 204                                 reg = <0xd000 0x1000>,
 205                                       <0xc100 0x100>;
 206                         };
 207
 208                         mdio: mdio@c0054 {
 209                                 #address-cells = <1>;
 210                                 #size-cells = <0>;
 211                                 compatible = "marvell,orion-mdio";
 212                                 reg = <0xc0054 0x4>;
 213                                 clocks = <&gateclk 19>;
 214                         };
 215
 216                         /* Network controller */
 217                         ethernet: ethernet@f0000 {
 218                                 compatible = "marvell,armada-375-pp2";
 219                                 reg = <0xf0000 0xa000>, /* Packet Processor regs */
 220                                       <0xc0000 0x3060>, /* LMS regs */
 221                                       <0xc4000 0x100>,  /* eth0 regs */
 222                                       <0xc5000 0x100>;  /* eth1 regs */
 223                                 clocks = <&gateclk 3>, <&gateclk 19>;
 224                                 clock-names = "pp_clk", "gop_clk";
 225                                 status = "disabled";
 226
 227                                 eth0: eth0 {
 228                                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 229                                         port-id = <0>;
 230                                         status = "disabled";
 231                                 };
 232
 233                                 eth1: eth1 {
 234                                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 235                                         port-id = <1>;
 236                                         status = "disabled";
 237                                 };
 238                         };
 239
 240                         rtc: rtc@10300 {
 241                                 compatible = "marvell,orion-rtc";
 242                                 reg = <0x10300 0x20>;
 243                                 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 244                         };
 245
 246                         spi0: spi@10600 {
 247                                 compatible = "marvell,armada-375-spi",
 248                                                 "marvell,orion-spi";
 249                                 reg = <0x10600 0x50>;
 250                                 #address-cells = <1>;
 251                                 #size-cells = <0>;
 252                                 cell-index = <0>;
 253                                 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 254                                 clocks = <&coreclk 0>;
 255                                 status = "disabled";
 256                         };
 257
 258                         spi1: spi@10680 {
 259                                 compatible = "marvell,armada-375-spi",
 260                                                 "marvell,orion-spi";
 261                                 reg = <0x10680 0x50>;
 262                                 #address-cells = <1>;
 263                                 #size-cells = <0>;
 264                                 cell-index = <1>;
 265                                 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 266                                 clocks = <&coreclk 0>;
 267                                 status = "disabled";
 268                         };
 269
 270                         i2c0: i2c@11000 {
 271                                 compatible = "marvell,mv64xxx-i2c";
 272                                 reg = <0x11000 0x20>;
 273                                 #address-cells = <1>;
 274                                 #size-cells = <0>;
 275                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 276                                 timeout-ms = <1000>;
 277                                 clocks = <&coreclk 0>;
 278                                 status = "disabled";
 279                         };
 280
 281                         i2c1: i2c@11100 {
 282                                 compatible = "marvell,mv64xxx-i2c";
 283                                 reg = <0x11100 0x20>;
 284                                 #address-cells = <1>;
 285                                 #size-cells = <0>;
 286                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 287                                 timeout-ms = <1000>;
 288                                 clocks = <&coreclk 0>;
 289                                 status = "disabled";
 290                         };
 291
 292                         uart0: serial@12000 {
 293                                 compatible = "snps,dw-apb-uart";
 294                                 reg = <0x12000 0x100>;
 295                                 reg-shift = <2>;
 296                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 297                                 reg-io-width = <1>;
 298                                 clocks = <&coreclk 0>;
 299                                 status = "disabled";
 300                         };
 301
 302                         uart1: serial@12100 {
 303                                 compatible = "snps,dw-apb-uart";
 304                                 reg = <0x12100 0x100>;
 305                                 reg-shift = <2>;
 306                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 307                                 reg-io-width = <1>;
 308                                 clocks = <&coreclk 0>;
 309                                 status = "disabled";
 310                         };
 311
 312                         pinctrl: pinctrl@18000 {
 313                                 compatible = "marvell,mv88f6720-pinctrl";
 314                                 reg = <0x18000 0x24>;
 315
 316                                 i2c0_pins: i2c0-pins {
 317                                         marvell,pins = "mpp14",  "mpp15";
 318                                         marvell,function = "i2c0";
 319                                 };
 320
 321                                 i2c1_pins: i2c1-pins {
 322                                         marvell,pins = "mpp61",  "mpp62";
 323                                         marvell,function = "i2c1";
 324                                 };
 325
 326                                 nand_pins: nand-pins {
 327                                         marvell,pins = "mpp0", "mpp1", "mpp2",
 328                                                 "mpp3", "mpp4", "mpp5",
 329                                                 "mpp6", "mpp7", "mpp8",
 330                                                 "mpp9", "mpp10", "mpp11",
 331                                                 "mpp12", "mpp13";
 332                                         marvell,function = "nand";
 333                                 };
 334
 335                                 sdio_pins: sdio-pins {
 336                                         marvell,pins = "mpp24",  "mpp25", "mpp26",
 337                                                      "mpp27", "mpp28", "mpp29";
 338                                         marvell,function = "sd";
 339                                 };
 340
 341                                 spi0_pins: spi0-pins {
 342                                         marvell,pins = "mpp0",  "mpp1", "mpp4",
 343                                                      "mpp5", "mpp8", "mpp9";
 344                                         marvell,function = "spi0";
 345                                 };
 346                         };
 347
 348                         gpio0: gpio@18100 {
 349                                 compatible = "marvell,orion-gpio";
 350                                 reg = <0x18100 0x40>;
 351                                 ngpios = <32>;
 352                                 gpio-controller;
 353                                 #gpio-cells = <2>;
 354                                 interrupt-controller;
 355                                 #interrupt-cells = <2>;
 356                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 357                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 358                                              <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 359                                              <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 360                         };
 361
 362                         gpio1: gpio@18140 {
 363                                 compatible = "marvell,orion-gpio";
 364                                 reg = <0x18140 0x40>;
 365                                 ngpios = <32>;
 366                                 gpio-controller;
 367                                 #gpio-cells = <2>;
 368                                 interrupt-controller;
 369                                 #interrupt-cells = <2>;
 370                                 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 371                                              <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
 372                                              <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
 373                                              <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 374                         };
 375
 376                         gpio2: gpio@18180 {
 377                                 compatible = "marvell,orion-gpio";
 378                                 reg = <0x18180 0x40>;
 379                                 ngpios = <3>;
 380                                 gpio-controller;
 381                                 #gpio-cells = <2>;
 382                                 interrupt-controller;
 383                                 #interrupt-cells = <2>;
 384                                 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 385                         };
 386
 387                         systemc: system-controller@18200 {
 388                                 compatible = "marvell,armada-375-system-controller";
 389                                 reg = <0x18200 0x100>;
 390                         };
 391
 392                         gateclk: clock-gating-control@18220 {
 393                                 compatible = "marvell,armada-375-gating-clock";
 394                                 reg = <0x18220 0x4>;
 395                                 clocks = <&coreclk 0>;
 396                                 #clock-cells = <1>;
 397                         };
 398
 399                         usbcluster: usb-cluster@18400 {
 400                                 compatible = "marvell,armada-375-usb-cluster";
 401                                 reg = <0x18400 0x4>;
 402                                 #phy-cells = <1>;
 403                         };
 404
 405                         mbusc: mbus-controller@20000 {
 406                                 compatible = "marvell,mbus-controller";
 407                                 reg = <0x20000 0x100>, <0x20180 0x20>;
 408                         };
 409
 410                         mpic: interrupt-controller@20a00 {
 411                                 compatible = "marvell,mpic";
 412                                 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 413                                 #interrupt-cells = <1>;
 414                                 #size-cells = <1>;
 415                                 interrupt-controller;
 416                                 msi-controller;
 417                                 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 418                         };
 419
 420                         timer1: timer@20300 {
 421                                 compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
 422                                 reg = <0x20300 0x30>, <0x21040 0x30>;
 423                                 interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
 424                                                       <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
 425                                                       <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
 426                                                       <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 427                                                       <&mpic 5>,
 428                                                       <&mpic 6>;
 429                                 clocks = <&coreclk 0>, <&refclk>;
 430                                 clock-names = "nbclk", "fixed";
 431                         };
 432
 433                         watchdog: watchdog@20300 {
 434                                 compatible = "marvell,armada-375-wdt";
 435                                 reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
 436                                 clocks = <&coreclk 0>, <&refclk>;
 437                                 clock-names = "nbclk", "fixed";
 438                         };
 439
 440                         cpurst: cpurst@20800 {
 441                                 compatible = "marvell,armada-370-cpu-reset";
 442                                 reg = <0x20800 0x10>;
 443                         };
 444
 445                         coherencyfab: coherency-fabric@21010 {
 446                                 compatible = "marvell,armada-375-coherency-fabric";
 447                                 reg = <0x21010 0x1c>;
 448                         };
 449
 450                         usb0: usb@50000 {
 451                                 compatible = "marvell,orion-ehci";
 452                                 reg = <0x50000 0x500>;
 453                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 454                                 clocks = <&gateclk 18>;
 455                                 phys = <&usbcluster PHY_TYPE_USB2>;
 456                                 phy-names = "usb";
 457                                 status = "disabled";
 458                         };
 459
 460                         usb1: usb@54000 {
 461                                 compatible = "marvell,orion-ehci";
 462                                 reg = <0x54000 0x500>;
 463                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 464                                 clocks = <&gateclk 26>;
 465                                 status = "disabled";
 466                         };
 467
 468                         usb2: usb3@58000 {
 469                                 compatible = "marvell,armada-375-xhci";
 470                                 reg = <0x58000 0x20000>,<0x5b880 0x80>;
 471                                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 472                                 clocks = <&gateclk 16>;
 473                                 phys = <&usbcluster PHY_TYPE_USB3>;
 474                                 phy-names = "usb";
 475                                 status = "disabled";
 476                         };
 477
 478                         xor0: xor@60800 {
 479                                 compatible = "marvell,orion-xor";
 480                                 reg = <0x60800 0x100
 481                                        0x60A00 0x100>;
 482                                 clocks = <&gateclk 22>;
 483                                 status = "okay";
 484
 485                                 xor00 {
 486                                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 487                                         dmacap,memcpy;
 488                                         dmacap,xor;
 489                                 };
 490                                 xor01 {
 491                                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 492                                         dmacap,memcpy;
 493                                         dmacap,xor;
 494                                         dmacap,memset;
 495                                 };
 496                         };
 497
 498                         xor1: xor@60900 {
 499                                 compatible = "marvell,orion-xor";
 500                                 reg = <0x60900 0x100
 501                                        0x60b00 0x100>;
 502                                 clocks = <&gateclk 23>;
 503                                 status = "okay";
 504
 505                                 xor10 {
 506                                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 507                                         dmacap,memcpy;
 508                                         dmacap,xor;
 509                                 };
 510                                 xor11 {
 511                                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 512                                         dmacap,memcpy;
 513                                         dmacap,xor;
 514                                         dmacap,memset;
 515                                 };
 516                         };
 517
 518                         cesa: crypto@90000 {
 519                                 compatible = "marvell,armada-375-crypto";
 520                                 reg = <0x90000 0x10000>;
 521                                 reg-names = "regs";
 522                                 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 523                                              <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 524                                 clocks = <&gateclk 30>, <&gateclk 31>,
 525                                          <&gateclk 28>, <&gateclk 29>;
 526                                 clock-names = "cesa0", "cesa1",
 527                                               "cesaz0", "cesaz1";
 528                                 marvell,crypto-srams = <&crypto_sram0>,
 529                                                        <&crypto_sram1>;
 530                                 marvell,crypto-sram-size = <0x800>;
 531                         };
 532
 533                         sata: sata@a0000 {
 534                                 compatible = "marvell,armada-370-sata";
 535                                 reg = <0xa0000 0x5000>;
 536                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 537                                 clocks = <&gateclk 14>, <&gateclk 20>;
 538                                 clock-names = "0", "1";
 539                                 status = "disabled";
 540                         };
 541
 542                         nand: nand@d0000 {
 543                                 compatible = "marvell,armada370-nand";
 544                                 reg = <0xd0000 0x54>;
 545                                 #address-cells = <1>;
 546                                 #size-cells = <1>;
 547                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 548                                 clocks = <&gateclk 11>;
 549                                 status = "disabled";
 550                         };
 551
 552                         sdio: mvsdio@d4000 {
 553                                 compatible = "marvell,orion-sdio";
 554                                 reg = <0xd4000 0x200>;
 555                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 556                                 clocks = <&gateclk 17>;
 557                                 bus-width = <4>;
 558                                 cap-sdio-irq;
 559                                 cap-sd-highspeed;
 560                                 cap-mmc-highspeed;
 561                                 status = "disabled";
 562                         };
 563
 564                         thermal: thermal@e8078 {
 565                                 compatible = "marvell,armada375-thermal";
 566                                 reg = <0xe8078 0x4>, <0xe807c 0x8>;
 567                                 status = "okay";
 568                         };
 569
 570                         coreclk: mvebu-sar@e8204 {
 571                                 compatible = "marvell,armada-375-core-clock";
 572                                 reg = <0xe8204 0x04>;
 573                                 #clock-cells = <1>;
 574                         };
 575
 576                         coredivclk: corediv-clock@e8250 {
 577                                 compatible = "marvell,armada-375-corediv-clock";
 578                                 reg = <0xe8250 0xc>;
 579                                 #clock-cells = <1>;
 580                                 clocks = <&mainpll>;
 581                                 clock-output-names = "nand";
 582                         };
 583                 };
 584
 585                 pciec: pcie@82000000 {
 586                         compatible = "marvell,armada-370-pcie";
 587                         status = "disabled";
 588                         device_type = "pci";
 589
 590                         #address-cells = <3>;
 591                         #size-cells = <2>;
 592
 593                         msi-parent = <&mpic>;
 594                         bus-range = <0x00 0xff>;
 595
 596                         ranges =
 597                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
 598                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
 599                                 0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
 600                                 0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
 601                                 0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
 602                                 0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
 603
 604                         pcie0: pcie@1,0 {
 605                                 device_type = "pci";
 606                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 607                                 reg = <0x0800 0 0 0 0>;
 608                                 #address-cells = <3>;
 609                                 #size-cells = <2>;
 610                                 #interrupt-cells = <1>;
 611                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 612                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 613                                 bus-range = <0x00 0xff>;
 614                                 interrupt-map-mask = <0 0 0 0>;
 615                                 interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 616                                 marvell,pcie-port = <0>;
 617                                 marvell,pcie-lane = <0>;
 618                                 clocks = <&gateclk 5>;
 619                                 status = "disabled";
 620                         };
 621
 622                         pcie1: pcie@2,0 {
 623                                 device_type = "pci";
 624                                 assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 625                                 reg = <0x1000 0 0 0 0>;
 626                                 #address-cells = <3>;
 627                                 #size-cells = <2>;
 628                                 #interrupt-cells = <1>;
 629                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 630                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 631                                 bus-range = <0x00 0xff>;
 632                                 interrupt-map-mask = <0 0 0 0>;
 633                                 interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 634                                 marvell,pcie-port = <0>;
 635                                 marvell,pcie-lane = <1>;
 636                                 clocks = <&gateclk 6>;
 637                                 status = "disabled";
 638                         };
 639
 640                 };
 641
 642                 crypto_sram0: sa-sram0 {
 643                         compatible = "mmio-sram";
 644                         reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
 645                         clocks = <&gateclk 30>;
 646                         #address-cells = <1>;
 647                         #size-cells = <1>;
 648                         ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
 649                 };
 650
 651                 crypto_sram1: sa-sram1 {
 652                         compatible = "mmio-sram";
 653                         reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
 654                         clocks = <&gateclk 31>;
 655                         #address-cells = <1>;
 656                         #size-cells = <1>;
 657                         ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
 658                 };
 659         };
 660 };