arch/arm/boot/dts/armada-370-synology-ds213j.dts

   1 /*
   2  * Device Tree file for Synology DS213j
   3  *
   4  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  *
  44  * Note: this Device Tree assumes that the bootloader has remapped the
  45  * internal registers to 0xf1000000 (instead of the old 0xd0000000).
  46  * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
  47  * bootloaders provided by Marvell. It is used in recent versions of
  48  * DSM software provided by Synology. Nonetheless, some earlier boards
  49  * were delivered with an older version of u-boot that left internal
  50  * registers mapped at 0xd0000000. If you have such a device you will
  51  * not be able to directly boot a kernel based on this Device Tree. In
  52  * that case, the preferred solution is to update your bootloader (e.g.
  53  * by upgrading to latest version of DSM, or building a new one and
  54  * installing it from u-boot prompt) or adjust the Devive Tree
  55  * (s/0xf1000000/0xd0000000/ in 'ranges' below).
  56  */
  57
  58 /dts-v1/;
  59
  60 #include <dt-bindings/input/input.h>
  61 #include <dt-bindings/gpio/gpio.h>
  62 #include "armada-370.dtsi"
  63
  64 / {
  65         model = "Synology DS213j";
  66         compatible = "synology,ds213j", "marvell,armada370",
  67                      "marvell,armada-370-xp";
  68
  69         chosen {
  70                 stdout-path = "serial0:115200n8";
  71         };
  72
  73         memory@0 {
  74                 device_type = "memory";
  75                 reg = <0x00000000 0x20000000>; /* 512 MB */
  76         };
  77
  78         soc {
  79                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  80                           MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
  81                           MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
  82
  83                 internal-regs {
  84
  85                         /* RTC provided by Seiko S-35390A I2C RTC chip below */
  86                         rtc@10300 {
  87                                 status = "disabled";
  88                         };
  89
  90                         i2c@11000 {
  91                                 compatible = "marvell,mv64xxx-i2c";
  92                                 pinctrl-0 = <&i2c0_pins>;
  93                                 pinctrl-names = "default";
  94                                 clock-frequency = <400000>;
  95                                 status = "okay";
  96
  97                                 /* Main device RTC chip */
  98                                 s35390a: s35390a@30 {
  99                                          compatible = "sii,s35390a";
 100                                          reg = <0x30>;
 101                                 };
 102                         };
 103
 104                         /* Connected to a header on device's PCB */
 105                         serial@12000 {
 106                                 status = "okay";
 107                         };
 108
 109                         /* Connected to a TI MSP430F2111 for power control */
 110                         serial@12100 {
 111                                 status = "okay";
 112                         };
 113
 114                         poweroff@12100 {
 115                                 compatible = "synology,power-off";
 116                                 reg = <0x12100 0x100>;
 117                                 clocks = <&coreclk 0>;
 118                         };
 119
 120                         /* rear USB port, near reset button */
 121                         usb@50000 {
 122                                 status = "okay";
 123                         };
 124
 125                         /* rear USB port, near RJ45 port */
 126                         usb@51000 {
 127                                 status = "okay";
 128                         };
 129
 130                         ethernet@70000 {
 131                                status = "okay";
 132                                phy = <&phy1>;
 133                                phy-mode = "sgmii";
 134                         };
 135
 136                         sata@a0000 {
 137                                 nr-ports = <2>;
 138                                 status = "okay";
 139                         };
 140                 };
 141         };
 142
 143         gpio-fan-32-38 {
 144                 status = "okay";
 145                 compatible = "gpio-fan";
 146                 pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
 147                              &fan_ctrl_high_pin &fan_alarm_pin>;
 148                 pinctrl-names = "default";
 149                 gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
 150                          &gpio2  0 GPIO_ACTIVE_HIGH
 151                          &gpio2  1 GPIO_ACTIVE_HIGH>;
 152                 alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 153                 gpio-fan,speed-map = <    0 0
 154                                        1000 1
 155                                        1150 2
 156                                        1350 4
 157                                        1500 3
 158                                        1650 5
 159                                        1750 6
 160                                        1900 7 >;
 161         };
 162
 163         gpio-leds {
 164                 compatible = "gpio-leds";
 165                 pinctrl-0 = <&disk1_led_pin
 166                              &disk2_led_pin>;
 167                 pinctrl-names = "default";
 168
 169                 disk1-led-amber {
 170                         label = "synology:amber:disk1";
 171                         gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
 172                         default-state = "keep";
 173                 };
 174
 175                 disk2-led-amber {
 176                         label = "synology:amber:disk2";
 177                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 178                         default-state = "keep";
 179                 };
 180         };
 181
 182         regulators {
 183                 compatible = "simple-bus";
 184                 #address-cells = <1>;
 185                 #size-cells = <0>;
 186                 pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
 187                 pinctrl-names = "default";
 188
 189                 sata1_regulator: sata1-regulator@1 {
 190                         compatible = "regulator-fixed";
 191                         reg = <1>;
 192                         regulator-name = "SATA1 Power";
 193                         regulator-min-microvolt = <5000000>;
 194                         regulator-max-microvolt = <5000000>;
 195                         startup-delay-us = <2000000>;
 196                         enable-active-high;
 197                         regulator-always-on;
 198                         regulator-boot-on;
 199                         gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 200                 };
 201
 202                 sata2_regulator: sata2-regulator@2 {
 203                         compatible = "regulator-fixed";
 204                         reg = <2>;
 205                         regulator-name = "SATA2 Power";
 206                         regulator-min-microvolt = <5000000>;
 207                         regulator-max-microvolt = <5000000>;
 208                         startup-delay-us = <4000000>;
 209                         enable-active-high;
 210                         regulator-always-on;
 211                         regulator-boot-on;
 212                         gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 213                 };
 214         };
 215 };
 216
 217 &mdio {
 218         phy1: ethernet-phy@1 { /* Marvell 88E1512 */
 219                 reg = <1>;
 220         };
 221 };
 222
 223 &pinctrl {
 224         disk1_led_pin: disk1-led-pin {
 225                 marvell,pins = "mpp31";
 226                 marvell,function = "gpio";
 227         };
 228
 229         disk2_led_pin: disk2-led-pin {
 230                 marvell,pins = "mpp32";
 231                 marvell,function = "gpio";
 232         };
 233
 234         sata1_pwr_pin: sata1-pwr-pin {
 235                 marvell,pins = "mpp37";
 236                 marvell,function = "gpio";
 237         };
 238
 239         sata2_pwr_pin: sata2-pwr-pin {
 240                 marvell,pins = "mpp62";
 241                 marvell,function = "gpio";
 242         };
 243
 244         sata1_pres_pin: sata1-pres-pin {
 245                 marvell,pins = "mpp60";
 246                 marvell,function = "gpio";
 247         };
 248
 249         sata2_pres_pin: sata2-pres-pin {
 250                 marvell,pins = "mpp48";
 251                 marvell,function = "gpio";
 252         };
 253
 254         syno_id_bit0_pin: syno-id-bit0-pin {
 255                 marvell,pins = "mpp55";
 256                 marvell,function = "gpio";
 257         };
 258
 259         syno_id_bit1_pin: syno-id-bit1-pin {
 260                 marvell,pins = "mpp56";
 261                 marvell,function = "gpio";
 262         };
 263
 264         syno_id_bit2_pin: syno-id-bit2-pin {
 265                 marvell,pins = "mpp57";
 266                 marvell,function = "gpio";
 267         };
 268
 269         syno_id_bit3_pin: syno-id-bit3-pin {
 270                 marvell,pins = "mpp58";
 271                 marvell,function = "gpio";
 272         };
 273
 274         fan_ctrl_low_pin: fan-ctrl-low-pin {
 275                 marvell,pins = "mpp65";
 276                 marvell,function = "gpio";
 277         };
 278
 279         fan_ctrl_mid_pin: fan-ctrl-mid-pin {
 280                 marvell,pins = "mpp64";
 281                 marvell,function = "gpio";
 282         };
 283
 284         fan_ctrl_high_pin: fan-ctrl-high-pin {
 285                 marvell,pins = "mpp63";
 286                 marvell,function = "gpio";
 287         };
 288
 289         fan_alarm_pin: fan-alarm-pin {
 290                 marvell,pins = "mpp38";
 291                 marvell,function = "gpio";
 292         };
 293 };
 294
 295 &spi0 {
 296         status = "okay";
 297
 298         spi-flash@0 {
 299                 #address-cells = <1>;
 300                 #size-cells = <1>;
 301                 compatible = "micron,n25q064", "jedec,spi-nor";
 302                 reg = <0>; /* Chip select 0 */
 303                 spi-max-frequency = <20000000>;
 304
 305                 /*
 306                  * Warning!
 307                  *
 308                  * Synology u-boot uses its compiled-in environment
 309                  * and it seems Synology did not care to change u-boot
 310                  * default configuration in order to allow saving a
 311                  * modified environment at a sensible location. So,
 312                  * if you do a 'saveenv' under u-boot, your modified
 313                  * environment will be saved at 1MB after the start
 314                  * of the flash, i.e. in the middle of the uImage.
 315                  * For that reason, it is strongly advised not to
 316                  * change the default environment, unless you know
 317                  * what you are doing.
 318                  */
 319                 partition@00000000 { /* u-boot */
 320                         label = "RedBoot";
 321                         reg = <0x00000000 0x000c0000>; /* 768KB */
 322                 };
 323
 324                 partition@000c0000 { /* uImage */
 325                         label = "zImage";
 326                         reg = <0x000c0000 0x002d0000>; /* 2880KB */
 327                 };
 328
 329                 partition@00390000 { /* uInitramfs */
 330                         label = "rd.gz";
 331                         reg = <0x00390000 0x00440000>; /* 4250KB */
 332                 };
 333
 334                 partition@007d0000 { /* MAC address and serial number */
 335                         label = "vendor";
 336                         reg = <0x007d0000 0x00010000>; /* 64KB */
 337                 };
 338
 339                 partition@007e0000 {
 340                         label = "RedBoot config";
 341                         reg = <0x007e0000 0x00010000>; /* 64KB */
 342                 };
 343
 344                 partition@007f0000 {
 345                         label = "FIS directory";
 346                         reg = <0x007f0000 0x00010000>; /* 64KB */
 347                 };
 348         };
 349 };