arch/arm/boot/dts/armada-370-rd.dts

   1 /*
   2  * Device Tree file for Marvell Armada 370 Reference Design board
   3  * (RD-88F6710-A1)
   4  *
   5  *  Copied from arch/arm/boot/dts/armada-370-db.dts
   6  *
   7  *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
   8  *
   9  * This file is licensed under the terms of the GNU General Public
  10  * License version 2.  This program is licensed "as is" without any
  11  * warranty of any kind, whether express or implied.
  12  *
  13  * Note: this Device Tree assumes that the bootloader has remapped the
  14  * internal registers to 0xf1000000 (instead of the default
  15  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  16  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  17  * boards were delivered with an older version of the bootloader that
  18  * left internal registers mapped at 0xd0000000. If you are in this
  19  * situation, you should either update your bootloader (preferred
  20  * solution) or the below Device Tree should be adjusted.
  21  */
  22
  23 /dts-v1/;
  24 #include <dt-bindings/input/input.h>
  25 #include <dt-bindings/gpio/gpio.h>
  26 #include "armada-370.dtsi"
  27
  28 / {
  29         model = "Marvell Armada 370 Reference Design";
  30         compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
  31
  32         chosen {
  33                 bootargs = "console=ttyS0,115200 earlyprintk";
  34         };
  35
  36         memory {
  37                 device_type = "memory";
  38                 reg = <0x00000000 0x20000000>; /* 512 MB */
  39         };
  40
  41         soc {
  42                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  43                           MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
  44
  45                 pcie-controller {
  46                         status = "okay";
  47
  48                         /* Internal mini-PCIe connector */
  49                         pcie@1,0 {
  50                                 /* Port 0, Lane 0 */
  51                                 status = "okay";
  52                         };
  53
  54                         /* Internal mini-PCIe connector */
  55                         pcie@2,0 {
  56                                 /* Port 1, Lane 0 */
  57                                 status = "okay";
  58                         };
  59                 };
  60
  61                 internal-regs {
  62                         pinctrl {
  63                                 fan_pins: fan-pins {
  64                                         marvell,pins = "mpp8";
  65                                         marvell,function = "gpio";
  66                                 };
  67
  68                                 led_pins: led-pins {
  69                                         marvell,pins = "mpp32";
  70                                         marvell,function = "gpio";
  71                                 };
  72                         };
  73
  74                         serial@12000 {
  75                                 status = "okay";
  76                         };
  77                         sata@a0000 {
  78                                 nr-ports = <2>;
  79                                 status = "okay";
  80                         };
  81
  82                         mdio {
  83                                 pinctrl-0 = <&mdio_pins>;
  84                                 pinctrl-names = "default";
  85                                 phy0: ethernet-phy@0 {
  86                                         reg = <0>;
  87                                 };
  88
  89                                 phy1: ethernet-phy@1 {
  90                                         reg = <1>;
  91                                 };
  92                         };
  93
  94                         ethernet@70000 {
  95                                 status = "okay";
  96                                 phy = <&phy0>;
  97                                 phy-mode = "sgmii";
  98                         };
  99                         ethernet@74000 {
 100                                 pinctrl-0 = <&ge1_rgmii_pins>;
 101                                 pinctrl-names = "default";
 102                                 status = "okay";
 103                                 phy = <&phy1>;
 104                                 phy-mode = "rgmii-id";
 105                         };
 106
 107                         mvsdio@d4000 {
 108                                 pinctrl-0 = <&sdio_pins1>;
 109                                 pinctrl-names = "default";
 110                                 status = "okay";
 111                                 /* No CD or WP GPIOs */
 112                                 broken-cd;
 113                         };
 114
 115                         usb@50000 {
 116                                 status = "okay";
 117                         };
 118
 119                         usb@51000 {
 120                                 status = "okay";
 121                         };
 122
 123                         gpio-keys {
 124                                 compatible = "gpio-keys";
 125                                 #address-cells = <1>;
 126                                 #size-cells = <0>;
 127                                 button@1 {
 128                                         label = "Software Button";
 129                                         linux,code = <KEY_POWER>;
 130                                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 131                                 };
 132                         };
 133
 134                         gpio-fan {
 135                                 compatible = "gpio-fan";
 136                                 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 137                                 gpio-fan,speed-map = <0 0 3000 1>;
 138                                 pinctrl-0 = <&fan_pins>;
 139                                 pinctrl-names = "default";
 140                         };
 141
 142                         gpio_leds {
 143                                 compatible = "gpio-leds";
 144                                 pinctrl-names = "default";
 145                                 pinctrl-0 = <&led_pins>;
 146
 147                                 sw_led {
 148                                         label = "370rd:green:sw";
 149                                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 150                                         default-state = "keep";
 151                                 };
 152                         };
 153
 154                         nand@d0000 {
 155                                 status = "okay";
 156                                 num-cs = <1>;
 157                                 marvell,nand-keep-config;
 158                                 marvell,nand-enable-arbiter;
 159                                 nand-on-flash-bbt;
 160
 161                                 partition@0 {
 162                                         label = "U-Boot";
 163                                         reg = <0 0x800000>;
 164                                 };
 165                                 partition@800000 {
 166                                         label = "Linux";
 167                                         reg = <0x800000 0x800000>;
 168                                 };
 169                                 partition@1000000 {
 170                                         label = "Filesystem";
 171                                         reg = <0x1000000 0x3f000000>;
 172                                 };
 173                         };
 174                 };
 175         };
 176  };