arch/arm/boot/dts/arm-realview-pb11mp.dts

   1 /*
   2  * Copyright 2015 Linaro Ltd
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a copy
   5  * of this software and associated documentation files (the "Software"), to deal
   6  * in the Software without restriction, including without limitation the rights
   7  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
   8  * copies of the Software, and to permit persons to whom the Software is
   9  * furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice shall be included in
  12  * all copies or substantial portions of the Software.
  13  *
  14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  17  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  18  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  19  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  20  * THE SOFTWARE.
  21  */
  22
  23 /dts-v1/;
  24 #include <dt-bindings/interrupt-controller/irq.h>
  25 #include <dt-bindings/gpio/gpio.h>
  26 #include "skeleton.dtsi"
  27
  28 / {
  29         model = "ARM RealView PB11MPcore";
  30         compatible = "arm,realview-pb11mp";
  31
  32         chosen { };
  33
  34         aliases {
  35                 serial0 = &pb11mp_serial0;
  36                 serial1 = &pb11mp_serial1;
  37                 serial2 = &pb11mp_serial2;
  38                 serial3 = &pb11mp_serial3;
  39         };
  40
  41         memory {
  42                 /*
  43                  * The PB11MPCore has 512 MiB memory @ 0x70000000
  44                  * and the first 256 are also remapped @ 0x00000000
  45                  */
  46                 reg = <0x70000000 0x20000000>;
  47         };
  48
  49         cpus {
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52                 enable-method = "arm,realview-smp";
  53
  54                 MP11_0: cpu@0 {
  55                         device_type = "cpu";
  56                         compatible = "arm,arm11mpcore";
  57                         reg = <0>;
  58                         next-level-cache = <&L2>;
  59                 };
  60
  61                 MP11_1: cpu@1 {
  62                         device_type = "cpu";
  63                         compatible = "arm,arm11mpcore";
  64                         reg = <1>;
  65                         next-level-cache = <&L2>;
  66                 };
  67
  68                 MP11_2: cpu@2 {
  69                         device_type = "cpu";
  70                         compatible = "arm,arm11mpcore";
  71                         reg = <2>;
  72                         next-level-cache = <&L2>;
  73                 };
  74
  75                 MP11_3: cpu@3 {
  76                         device_type = "cpu";
  77                         compatible = "arm,arm11mpcore";
  78                         reg = <3>;
  79                         next-level-cache = <&L2>;
  80                 };
  81         };
  82
  83         /* Primary TestChip GIC synthesized with the CPU */
  84         intc_tc11mp: interrupt-controller@1f000100 {
  85                 compatible = "arm,tc11mp-gic";
  86                 #interrupt-cells = <3>;
  87                 #address-cells = <1>;
  88                 interrupt-controller;
  89                 reg = <0x1f001000 0x1000>,
  90                       <0x1f000100 0x100>;
  91         };
  92
  93         L2: l2-cache {
  94                 compatible = "arm,l220-cache";
  95                 reg = <0x1f002000 0x1000>;
  96                 interrupt-parent = <&intc_tc11mp>;
  97                 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
  98                              <0 30 IRQ_TYPE_LEVEL_HIGH>,
  99                              <0 31 IRQ_TYPE_LEVEL_HIGH>;
 100                 cache-unified;
 101                 cache-level = <2>;
 102                 /*
 103                  * Override default cache size, sets and
 104                  * associativity as these may be erroneously set
 105                  * up by boot loader(s), probably for safety
 106                  * since th outer sync operation can cause the
 107                  * cache to hang unless disabled.
 108                  */
 109                 cache-size = <1048576>; // 1MB
 110                 cache-sets = <4096>;
 111                 cache-line-size = <32>;
 112                 arm,shared-override;
 113                 arm,parity-enable;
 114                 arm,outer-sync-disable;
 115         };
 116
 117         scu@1f000000 {
 118                 compatible = "arm,arm11mp-scu";
 119                 reg = <0x1f000000 0x100>;
 120         };
 121
 122         timer@1f000600 {
 123                 compatible = "arm,arm11mp-twd-timer";
 124                 reg = <0x1f000600 0x20>;
 125                 interrupt-parent = <&intc_tc11mp>;
 126                 interrupts = <1 13 0xf04>;
 127         };
 128
 129         watchdog@1f000620 {
 130                 compatible = "arm,arm11mp-twd-wdt";
 131                 reg = <0x1f000620 0x20>;
 132                 interrupt-parent = <&intc_tc11mp>;
 133                 interrupts = <1 14 0xf04>;
 134         };
 135
 136         /* PMU with one IRQ line per core */
 137         pmu {
 138                 compatible = "arm,arm11mpcore-pmu";
 139                 interrupt-parent = <&intc_tc11mp>;
 140                 interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
 141                              <0 18 IRQ_TYPE_LEVEL_HIGH>,
 142                              <0 19 IRQ_TYPE_LEVEL_HIGH>,
 143                              <0 20 IRQ_TYPE_LEVEL_HIGH>;
 144                 interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
 145         };
 146
 147         /* The voltage to the MMC card is hardwired at 3.3V */
 148         vmmc: fixedregulator@0 {
 149                 compatible = "regulator-fixed";
 150                 regulator-name = "vmmc";
 151                 regulator-min-microvolt = <3300000>;
 152                 regulator-max-microvolt = <3300000>;
 153                 regulator-boot-on;
 154         };
 155
 156         veth: fixedregulator@0 {
 157                 compatible = "regulator-fixed";
 158                 regulator-name = "veth";
 159                 regulator-min-microvolt = <3300000>;
 160                 regulator-max-microvolt = <3300000>;
 161                 regulator-boot-on;
 162         };
 163
 164         xtal24mhz: xtal24mhz@24M {
 165                 #clock-cells = <0>;
 166                 compatible = "fixed-clock";
 167                 clock-frequency = <24000000>;
 168         };
 169
 170         refclk32khz: refclk32khz {
 171                 compatible = "fixed-clock";
 172                 #clock-cells = <0>;
 173                 clock-frequency = <32768>;
 174         };
 175
 176         timclk: timclk@1M {
 177                 #clock-cells = <0>;
 178                 compatible = "fixed-factor-clock";
 179                 clock-div = <24>;
 180                 clock-mult = <1>;
 181                 clocks = <&xtal24mhz>;
 182         };
 183
 184         mclk: mclk@24M {
 185                 #clock-cells = <0>;
 186                 compatible = "fixed-factor-clock";
 187                 clock-div = <1>;
 188                 clock-mult = <1>;
 189                 clocks = <&xtal24mhz>;
 190         };
 191
 192         kmiclk: kmiclk@24M {
 193                 #clock-cells = <0>;
 194                 compatible = "fixed-factor-clock";
 195                 clock-div = <1>;
 196                 clock-mult = <1>;
 197                 clocks = <&xtal24mhz>;
 198         };
 199
 200         sspclk: sspclk@24M {
 201                 #clock-cells = <0>;
 202                 compatible = "fixed-factor-clock";
 203                 clock-div = <1>;
 204                 clock-mult = <1>;
 205                 clocks = <&xtal24mhz>;
 206         };
 207
 208         uartclk: uartclk@24M {
 209                 #clock-cells = <0>;
 210                 compatible = "fixed-factor-clock";
 211                 clock-div = <1>;
 212                 clock-mult = <1>;
 213                 clocks = <&xtal24mhz>;
 214         };
 215
 216         wdogclk: wdogclk@24M {
 217                 #clock-cells = <0>;
 218                 compatible = "fixed-factor-clock";
 219                 clock-div = <1>;
 220                 clock-mult = <1>;
 221                 clocks = <&xtal24mhz>;
 222         };
 223
 224         /* FIXME: this actually hangs off the PLL clocks */
 225         pclk: pclk@0 {
 226                 #clock-cells = <0>;
 227                 compatible = "fixed-clock";
 228                 clock-frequency = <0>;
 229         };
 230
 231         flash0@40000000 {
 232                 /* 2 * 32MiB NOR Flash memory */
 233                 compatible = "arm,versatile-flash", "cfi-flash";
 234                 reg = <0x40000000 0x04000000>;
 235                 bank-width = <4>;
 236         };
 237
 238         flash1@44000000 {
 239                 // 2 * 32MiB NOR Flash memory
 240                 compatible = "arm,versatile-flash", "cfi-flash";
 241                 reg = <0x44000000 0x04000000>;
 242                 bank-width = <4>;
 243         };
 244
 245         bridge {
 246                 compatible = "ti,ths8134a", "ti,ths8134";
 247                 #address-cells = <1>;
 248                 #size-cells = <0>;
 249
 250                 ports {
 251                         #address-cells = <1>;
 252                         #size-cells = <0>;
 253
 254                         port@0 {
 255                                 reg = <0>;
 256
 257                                 vga_bridge_in: endpoint {
 258                                         remote-endpoint = <&clcd_pads>;
 259                                 };
 260                         };
 261
 262                         port@1 {
 263                                 reg = <1>;
 264
 265                                 vga_bridge_out: endpoint {
 266                                         remote-endpoint = <&vga_con_in>;
 267                                 };
 268                         };
 269                 };
 270         };
 271
 272         vga {
 273                 /*
 274                  * This DDC I2C is connected directly to the DVI portions
 275                  * of the connector, so it's not really working when the
 276                  * monitor is connected to the VGA connector.
 277                  */
 278                 compatible = "vga-connector";
 279                 ddc-i2c-bus = <&i2c1>;
 280
 281                 port {
 282                         vga_con_in: endpoint {
 283                                 remote-endpoint = <&vga_bridge_out>;
 284                         };
 285                 };
 286         };
 287
 288         soc {
 289                 #address-cells = <1>;
 290                 #size-cells = <1>;
 291                 compatible = "arm,realview-pb11mp-soc", "simple-bus";
 292                 regmap = <&pb11mp_syscon>;
 293                 ranges;
 294
 295                 pb11mp_syscon: syscon@10000000 {
 296                         compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
 297                         reg = <0x10000000 0x1000>;
 298
 299                         led@08.0 {
 300                                 compatible = "register-bit-led";
 301                                 offset = <0x08>;
 302                                 mask = <0x01>;
 303                                 label = "versatile:0";
 304                                 linux,default-trigger = "heartbeat";
 305                                 default-state = "on";
 306                         };
 307                         led@08.1 {
 308                                 compatible = "register-bit-led";
 309                                 offset = <0x08>;
 310                                 mask = <0x02>;
 311                                 label = "versatile:1";
 312                                 linux,default-trigger = "mmc0";
 313                                 default-state = "off";
 314                         };
 315                         led@08.2 {
 316                                 compatible = "register-bit-led";
 317                                 offset = <0x08>;
 318                                 mask = <0x04>;
 319                                 label = "versatile:2";
 320                                 linux,default-trigger = "cpu0";
 321                                 default-state = "off";
 322                         };
 323                         led@08.3 {
 324                                 compatible = "register-bit-led";
 325                                 offset = <0x08>;
 326                                 mask = <0x08>;
 327                                 label = "versatile:3";
 328                                 linux,default-trigger = "cpu1";
 329                                 default-state = "off";
 330                         };
 331                         led@08.4 {
 332                                 compatible = "register-bit-led";
 333                                 offset = <0x08>;
 334                                 mask = <0x10>;
 335                                 label = "versatile:4";
 336                                 linux,default-trigger = "cpu2";
 337                                 default-state = "off";
 338                         };
 339                         led@08.5 {
 340                                 compatible = "register-bit-led";
 341                                 offset = <0x08>;
 342                                 mask = <0x20>;
 343                                 label = "versatile:5";
 344                                 linux,default-trigger = "cpu3";
 345                                 default-state = "off";
 346                         };
 347                         led@08.6 {
 348                                 compatible = "register-bit-led";
 349                                 offset = <0x08>;
 350                                 mask = <0x40>;
 351                                 label = "versatile:6";
 352                                 default-state = "off";
 353                         };
 354                         led@08.7 {
 355                                 compatible = "register-bit-led";
 356                                 offset = <0x08>;
 357                                 mask = <0x80>;
 358                                 label = "versatile:7";
 359                                 default-state = "off";
 360                         };
 361
 362                         oscclk0: osc0@0c {
 363                                 compatible = "arm,syscon-icst307";
 364                                 #clock-cells = <0>;
 365                                 lock-offset = <0x20>;
 366                                 vco-offset = <0x0C>;
 367                                 clocks = <&xtal24mhz>;
 368                         };
 369                         oscclk1: osc1@10 {
 370                                 compatible = "arm,syscon-icst307";
 371                                 #clock-cells = <0>;
 372                                 lock-offset = <0x20>;
 373                                 vco-offset = <0x10>;
 374                                 clocks = <&xtal24mhz>;
 375                         };
 376                         oscclk2: osc2@14 {
 377                                 compatible = "arm,syscon-icst307";
 378                                 #clock-cells = <0>;
 379                                 lock-offset = <0x20>;
 380                                 vco-offset = <0x14>;
 381                                 clocks = <&xtal24mhz>;
 382                         };
 383                         oscclk3: osc3@18 {
 384                                 compatible = "arm,syscon-icst307";
 385                                 #clock-cells = <0>;
 386                                 lock-offset = <0x20>;
 387                                 vco-offset = <0x18>;
 388                                 clocks = <&xtal24mhz>;
 389                         };
 390                         oscclk4: osc4@1c {
 391                                 compatible = "arm,syscon-icst307";
 392                                 #clock-cells = <0>;
 393                                 lock-offset = <0x20>;
 394                                 vco-offset = <0x1c>;
 395                                 clocks = <&xtal24mhz>;
 396                         };
 397                         oscclk5: osc5@d4 {
 398                                 compatible = "arm,syscon-icst307";
 399                                 #clock-cells = <0>;
 400                                 lock-offset = <0x20>;
 401                                 vco-offset = <0xd4>;
 402                                 clocks = <&xtal24mhz>;
 403                         };
 404                         oscclk6: osc6@d8 {
 405                                 compatible = "arm,syscon-icst307";
 406                                 #clock-cells = <0>;
 407                                 lock-offset = <0x20>;
 408                                 vco-offset = <0xd8>;
 409                                 clocks = <&xtal24mhz>;
 410                         };
 411                 };
 412
 413                 sp810_syscon: sysctl@10001000 {
 414                         compatible = "arm,sp810", "arm,primecell";
 415                         reg = <0x10001000 0x1000>;
 416                         clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
 417                         clock-names = "refclk", "timclk", "apb_pclk";
 418                         #clock-cells = <1>;
 419                         clock-output-names = "timerclk0",
 420                                              "timerclk1",
 421                                              "timerclk2",
 422                                              "timerclk3";
 423                         assigned-clocks = <&sp810_syscon 0>,
 424                                           <&sp810_syscon 1>,
 425                                           <&sp810_syscon 2>,
 426                                           <&sp810_syscon 3>;
 427                         assigned-clock-parents = <&timclk>,
 428                                                <&timclk>,
 429                                                <&timclk>,
 430                                                <&timclk>;
 431                 };
 432
 433                 i2c0: i2c@10002000 {
 434                         #address-cells = <1>;
 435                         #size-cells = <0>;
 436                         compatible = "arm,versatile-i2c";
 437                         reg = <0x10002000 0x1000>;
 438
 439                         rtc@68 {
 440                                 compatible = "dallas,ds1338";
 441                                 reg = <0x68>;
 442                         };
 443                 };
 444
 445                 aaci: aaci@10004000 {
 446                         compatible = "arm,pl041", "arm,primecell";
 447                         reg = <0x10004000 0x1000>;
 448                         interrupt-parent = <&intc_tc11mp>;
 449                         interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 450                         clocks = <&pclk>;
 451                         clock-names = "apb_pclk";
 452                 };
 453
 454                 mci: mmcsd@10005000 {
 455                         compatible = "arm,pl18x", "arm,primecell";
 456                         reg = <0x10005000 0x1000>;
 457                         interrupt-parent = <&intc_tc11mp>;
 458                         interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
 459                                         <0 15 IRQ_TYPE_LEVEL_HIGH>;
 460                         /* Due to frequent FIFO overruns, use just 500 kHz */
 461                         max-frequency = <500000>;
 462                         bus-width = <4>;
 463                         cap-sd-highspeed;
 464                         cap-mmc-highspeed;
 465                         clocks = <&mclk>, <&pclk>;
 466                         clock-names = "mclk", "apb_pclk";
 467                         vmmc-supply = <&vmmc>;
 468                         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 469                         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 470                 };
 471
 472                 kmi0: kmi@10006000 {
 473                         compatible = "arm,pl050", "arm,primecell";
 474                         reg = <0x10006000 0x1000>;
 475                         interrupt-parent = <&intc_tc11mp>;
 476                         interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 477                         clocks = <&kmiclk>, <&pclk>;
 478                         clock-names = "KMIREFCLK", "apb_pclk";
 479                 };
 480
 481                 kmi1: kmi@10007000 {
 482                         compatible = "arm,pl050", "arm,primecell";
 483                         reg = <0x10007000 0x1000>;
 484                         interrupt-parent = <&intc_tc11mp>;
 485                         interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 486                         clocks = <&kmiclk>, <&pclk>;
 487                         clock-names = "KMIREFCLK", "apb_pclk";
 488                 };
 489
 490                 pb11mp_serial0: serial@10009000 {
 491                         compatible = "arm,pl011", "arm,primecell";
 492                         reg = <0x10009000 0x1000>;
 493                         interrupt-parent = <&intc_tc11mp>;
 494                         interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
 495                         clocks = <&uartclk>, <&pclk>;
 496                         clock-names = "uartclk", "apb_pclk";
 497                 };
 498
 499                 pb11mp_serial1: serial@1000a000 {
 500                         compatible = "arm,pl011", "arm,primecell";
 501                         reg = <0x1000a000 0x1000>;
 502                         interrupt-parent = <&intc_tc11mp>;
 503                         interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 504                         clocks = <&uartclk>, <&pclk>;
 505                         clock-names = "uartclk", "apb_pclk";
 506                 };
 507
 508                 pb11mp_serial2: serial@1000b000 {
 509                         compatible = "arm,pl011", "arm,primecell";
 510                         reg = <0x1000b000 0x1000>;
 511                         interrupt-parent = <&intc_pb11mp>;
 512                         interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 513                         clocks = <&uartclk>, <&pclk>;
 514                         clock-names = "uartclk", "apb_pclk";
 515                 };
 516
 517                 pb11mp_serial3: serial@1000c000 {
 518                         compatible = "arm,pl011", "arm,primecell";
 519                         reg = <0x1000c000 0x1000>;
 520                         interrupt-parent = <&intc_pb11mp>;
 521                         interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 522                         clocks = <&uartclk>, <&pclk>;
 523                         clock-names = "uartclk", "apb_pclk";
 524                 };
 525
 526                 spi@1000d000 {
 527                         compatible = "arm,pl022", "arm,primecell";
 528                         reg = <0x1000d000 0x1000>;
 529                         interrupt-parent = <&intc_pb11mp>;
 530                         interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 531                         clocks = <&sspclk>, <&pclk>;
 532                         clock-names = "SSPCLK", "apb_pclk";
 533                 };
 534
 535                 watchdog@1000f000 {
 536                         compatible = "arm,sp805", "arm,primecell";
 537                         reg = <0x1000f000 0x1000>;
 538                         interrupt-parent = <&intc_pb11mp>;
 539                         interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 540                         clocks = <&wdogclk>, <&pclk>;
 541                         clock-names = "wdogclk", "apb_pclk";
 542                         status = "disabled";
 543                 };
 544
 545                 watchdog@10010000 {
 546                         compatible = "arm,sp805", "arm,primecell";
 547                         reg = <0x10010000 0x1000>;
 548                         interrupt-parent = <&intc_pb11mp>;
 549                         interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 550                         clocks = <&wdogclk>, <&pclk>;
 551                         clock-names = "wdogclk", "apb_pclk";
 552                 };
 553
 554                 timer01: timer@10011000 {
 555                         compatible = "arm,sp804", "arm,primecell";
 556                         reg = <0x10011000 0x1000>;
 557                         interrupt-parent = <&intc_tc11mp>;
 558                         interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
 559                         arm,sp804-has-irq = <1>;
 560                         clocks = <&sp810_syscon 0>,
 561                                  <&sp810_syscon 1>,
 562                                  <&pclk>;
 563                         clock-names = "timerclk0",
 564                                     "timerclk1",
 565                                     "apb_pclk";
 566                 };
 567
 568                 timer23: timer@10012000 {
 569                         compatible = "arm,sp804", "arm,primecell";
 570                         reg = <0x10012000 0x1000>;
 571                         interrupt-parent = <&intc_tc11mp>;
 572                         interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 573                         arm,sp804-has-irq = <1>;
 574                         clocks = <&sp810_syscon 2>,
 575                                  <&sp810_syscon 3>,
 576                                  <&pclk>;
 577                         clock-names = "timerclk2",
 578                                     "timerclk3",
 579                                     "apb_pclk";
 580                 };
 581
 582                 gpio0: gpio@10013000 {
 583                         compatible = "arm,pl061", "arm,primecell";
 584                         reg = <0x10013000 0x1000>;
 585                         gpio-controller;
 586                         interrupt-parent = <&intc_pb11mp>;
 587                         interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 588                         #gpio-cells = <2>;
 589                         interrupt-controller;
 590                         #interrupt-cells = <2>;
 591                         clocks = <&pclk>;
 592                         clock-names = "apb_pclk";
 593                 };
 594
 595                 gpio1: gpio@10014000 {
 596                         compatible = "arm,pl061", "arm,primecell";
 597                         reg = <0x10014000 0x1000>;
 598                         gpio-controller;
 599                         interrupt-parent = <&intc_pb11mp>;
 600                         interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 601                         #gpio-cells = <2>;
 602                         interrupt-controller;
 603                         #interrupt-cells = <2>;
 604                         clocks = <&pclk>;
 605                         clock-names = "apb_pclk";
 606                 };
 607
 608                 gpio2: gpio@10015000 {
 609                         compatible = "arm,pl061", "arm,primecell";
 610                         reg = <0x10015000 0x1000>;
 611                         gpio-controller;
 612                         interrupt-parent = <&intc_pb11mp>;
 613                         interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 614                         #gpio-cells = <2>;
 615                         interrupt-controller;
 616                         #interrupt-cells = <2>;
 617                         clocks = <&pclk>;
 618                         clock-names = "apb_pclk";
 619                 };
 620
 621                 i2c1: i2c@10016000 {
 622                         #address-cells = <1>;
 623                         #size-cells = <0>;
 624                         compatible = "arm,versatile-i2c";
 625                         reg = <0x10016000 0x1000>;
 626                 };
 627
 628                 rtc: rtc@10017000 {
 629                         compatible = "arm,pl031", "arm,primecell";
 630                         reg = <0x10017000 0x1000>;
 631                         interrupt-parent = <&intc_tc11mp>;
 632                         interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 633                         clocks = <&pclk>;
 634                         clock-names = "apb_pclk";
 635                 };
 636
 637                 timer45: timer@10018000 {
 638                         compatible = "arm,sp804", "arm,primecell";
 639                         reg = <0x10018000 0x1000>;
 640                         clocks = <&timclk>, <&pclk>;
 641                         clock-names = "timer", "apb_pclk";
 642                         status = "disabled";
 643                 };
 644
 645                 timer67: timer@10019000 {
 646                         compatible = "arm,sp804", "arm,primecell";
 647                         reg = <0x10019000 0x1000>;
 648                         clocks = <&timclk>, <&pclk>;
 649                         clock-names = "timer", "apb_pclk";
 650                         status = "disabled";
 651                 };
 652
 653
 654                 clcd@10020000 {
 655                         compatible = "arm,pl111", "arm,primecell";
 656                         reg = <0x10020000 0x1000>;
 657                         interrupt-parent = <&intc_pb11mp>;
 658                         interrupt-names = "combined";
 659                         interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 660                         clocks = <&oscclk4>, <&pclk>;
 661                         clock-names = "clcdclk", "apb_pclk";
 662                         /* 1024x768 16bpp @65MHz works fine */
 663                         max-memory-bandwidth = <95000000>;
 664
 665                         port {
 666                                 clcd_pads: endpoint {
 667                                         remote-endpoint = <&vga_bridge_in>;
 668                                         arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 669                                 };
 670                         };
 671                 };
 672
 673                 /*
 674                  * This GIC on the Platform Baseboard is cascaded off the
 675                  * TestChip GIC
 676                  */
 677                 intc_pb11mp: interrupt-controller@1e000000 {
 678                         compatible = "arm,arm11mp-gic";
 679                         #interrupt-cells = <3>;
 680                         #address-cells = <1>;
 681                         interrupt-controller;
 682                         reg = <0x1e001000 0x1000>,
 683                               <0x1e000000 0x100>;
 684                         interrupt-parent = <&intc_tc11mp>;
 685                         interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 686                 };
 687
 688                 /* SMSC 9118 ethernet with PHY and EEPROM */
 689                 ethernet@4e000000 {
 690                         compatible = "smsc,lan9118", "smsc,lan9115";
 691                         reg = <0x4e000000 0x10000>;
 692                         interrupt-parent = <&intc_tc11mp>;
 693                         interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
 694                         phy-mode = "mii";
 695                         reg-io-width = <4>;
 696                         smsc,irq-active-high;
 697                         smsc,irq-push-pull;
 698                         vdd33a-supply = <&veth>;
 699                         vddvario-supply = <&veth>;
 700                 };
 701
 702                 usb@4f000000 {
 703                         compatible = "nxp,usb-isp1761";
 704                         reg = <0x4f000000 0x20000>;
 705                         interrupt-parent = <&intc_tc11mp>;
 706                         interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
 707                         port1-otg;
 708                 };
 709         };
 710 };