arch/arm/boot/dts/am572x-idk.dts

   1 /*
   2  * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /dts-v1/;
  10
  11 #include "dra74x.dtsi"
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include "am57xx-idk-common.dtsi"
  15
  16 / {
  17         model = "TI AM5728 IDK";
  18         compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
  19                      "ti,dra7";
  20
  21         memory@0 {
  22                 device_type = "memory";
  23                 reg = <0x0 0x80000000 0x0 0x80000000>;
  24         };
  25
  26         status-leds {
  27                 compatible = "gpio-leds";
  28                 cpu0-led {
  29                         label = "status0:red:cpu0";
  30                         gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
  31                         default-state = "off";
  32                         linux,default-trigger = "cpu0";
  33                 };
  34
  35                 usr0-led {
  36                         label = "status0:green:usr";
  37                         gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
  38                         default-state = "off";
  39                 };
  40
  41                 heartbeat-led {
  42                         label = "status0:blue:heartbeat";
  43                         gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
  44                         default-state = "off";
  45                         linux,default-trigger = "heartbeat";
  46                 };
  47
  48                 cpu1-led {
  49                         label = "status1:red:cpu1";
  50                         gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
  51                         default-state = "off";
  52                         linux,default-trigger = "cpu1";
  53                 };
  54
  55                 usr1-led {
  56                         label = "status1:green:usr";
  57                         gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
  58                         default-state = "off";
  59                 };
  60
  61                 mmc0-led {
  62                         label = "status1:blue:mmc0";
  63                         gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
  64                         default-state = "off";
  65                         linux,default-trigger = "mmc0";
  66                 };
  67         };
  68 };
  69
  70 &omap_dwc3_2 {
  71         extcon = <&extcon_usb2>;
  72 };
  73
  74 &extcon_usb2 {
  75         id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
  76         vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
  77 };
  78
  79 &mmc1 {
  80         status = "okay";
  81         vmmc-supply = <&v3_3d>;
  82         vmmc_aux-supply = <&ldo1_reg>;
  83         bus-width = <4>;
  84         cd-gpios = <&gpio6 27 0>; /* gpio 219 */
  85 };
  86
  87 &sn65hvs882 {
  88         load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
  89 };
  90
  91 &pcie1 {
  92         gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
  93 };
  94
  95 &mailbox5 {
  96         status = "okay";
  97         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
  98                 status = "okay";
  99         };
 100         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 101                 status = "okay";
 102         };
 103 };
 104
 105 &mailbox6 {
 106         status = "okay";
 107         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 108                 status = "okay";
 109         };
 110         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 111                 status = "okay";
 112         };
 113 };